State Warehousing Corporation Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
State Warehousing Corporation - CGSWC Tender
Civil And Construction
Opening Date20 Jan 2025
Closing Date11 Feb 2025
Tender Amount₹ 73,29,000
Costs
EMD
₹ 55,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
164848Tender No
164848Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://http://cgswc.cg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
15.62
263
4108
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
1769.09
254
449349
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
2587.2
18
46570
... More
Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer.
1364.52
79
108479
... More
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm
59.04
569
33594
... More
Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer. Electric resistance or induction butt welded tubes Grade-300
1336.68
93
124980
... More
Extra for providing and fixing wind ties of 40x6mm flat iron section
25.62
118
3023
... More
Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
76.86
636
48883
... More
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
112.21
55
6172
... More
Painting on old work (one or more coats) to give an even shade with:
335
35
11725
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches
60
132
7920
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
13.59
3263
44344
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
324.47
54
17684
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
16.18
139
2249
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
9.99
235
2348
... More
Edge of slab breaks in floorand wall up to 200mm
4.31
34
147
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
4.03
4163
16777
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
743.19
68
50537
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
25.62
68
1742
... More
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.
3385.62
4
14558
... More
Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete.
215.04
5
1118
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
215.04
94
20321
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
215.04
44
9569
... More
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
1624.82
23
37371
... More
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
1760.79
41
72192
... More
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
8.89
768
6828
... More
Demolishing brick masonry including arches, stacking of serviceable
material disposal of unserviceable material within 50 metres lead.
In cement mortar.
20.41
263
5368
... More
Extra for cutting reinforcement bars in R.C.C. or R.B work. (Cross sectional area of RCC/RB work to be measured)
2.54
447
1135
... More
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
272.43
185
50400
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
17.95
2659
47729
... More
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 415
9746.07
54
531161
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
114.38
297
33971
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
73.1
184
13450
... More
Wall of any thickness including attached pilasters, buttresses etc.
540.15
228
123154
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
150.71
4163
627406
... More
Extra for brick work In S/S above plinth & up to floor five level.
48.72
3384
164868
... More
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. Complete
745.88
4
3207
... More
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
1405.75
9
13214
... More
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
310
93
28985
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
275.39
107
29467
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
275.39
91
25198
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
164.12
87
14278
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1526.83
56
85502
... More
Steel work welded in built up sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of red oxide zinc
chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
204.75
68
13923
... More
Applying priming coat on steel work with red oxide zinc chromate primer
25.98
17
455
... More
Painting on new work (two or more coats) to give an even shade with:
37.03
55
2037
... More
Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.
296.34
57
16891
... More
Demolishing cement concrete including disposal of material within 50 metre lead.
7.2
549
3953
... More
1:4:8 or leaner mix
40.54
329
13338
... More
Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.
4
100
400
... More
Taking out door shutters (steel or wood) including stacking within 50 metres lead.
3
46
140
... More
Dismantling windows chowkhats with shutters (steel or wood) including
architrave, hold fast etc. complete and stacking within 50 metres lead..
6
66
399
... More
Taking out wind ties from roof including cutting out rusted bolts, nuts etc.
and removing materials to any distance within compound and stacking.
450.71
1
451
... More
Dismantling asbestos sheet roofing including ridges, hips valley and
gutters and stacking the materials with 50 m lead.
775.58
16
12797
... More
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
4.66
768
3579
... More
Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :
40
132
5280
... More
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
16.86
263
4434
... More
Extra for brick work In S/S above plinth & up to floor five level.
4.16
3384
14077
... More
Extra for brick work In S/S above 4.00 m & upto 8.00 M
7.3
3505
25587
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
582.16
54
31728
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
49.43
2659
131434
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
6.04
139
840
... More
Beams, lintel, cantilevers & walls.
11.12
202
2246
... More
(D) weather shade chhajja cornies and moulding.
5.72
294
1682
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
26.59
235
6249
... More
Edge of slab breaks in floorand wall up to 200mm
15.82
34
538
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
1.5
4163
6245
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
5.28
4260
22495
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
89.65
91
8203
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
20.02
107
2142
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
47.04
87
4092
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
15
371
5565
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
49.77
254
12642
... More
75mm thick
296.34
345
102237
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
28.84
18
519
... More
60 mm. Wide
392.64
25
9816
... More
Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer.
454.84
79
36160
... More
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete Aperture 50x25mm
19.68
569
11198
... More
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
17.79
1691
30083
... More
Providing and fixing 27.5cm. long wire spring for rolling shutters.
8
362
2896
... More
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
8.09
399
3228
... More
Providing andfixing ball bearing for rolling shutters.
8
423
3384
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
82.33
67
5557
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
21.55
331
7133
... More
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
21.52
338
7274
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
6.8
804
5467
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
6.18
1832
11322
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
238
1428
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
6
57
345
... More
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
22
135
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
3
47
141
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
235.37
68
16005
... More
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
26.54
1151
30548
... More
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.
1643.51
4
7067
... More
Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete.
82.91
5
431
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
114.13
94
10785
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
154.91
44
6893
... More
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
832.42
23
19146
... More
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
921.02
41
37762
... More
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
3.62
535
1937
... More
Applying priming coat on steel work with red oxide zinc chromate primer
57.1
17
999
... More
Painting on new work (two or more coats) to give an even shade with:
48.68
55
2677
... More
Painting on old work (one or more coats) to give an even shade with:
37.4
35
1309
... More
Supply, erection, jointing, testing & commissioning of "C" Class MS pipes (as per IS: 1239) including necessary specials such as tees, bends, flanges reducers etc., complete on wall/ ceiling. The pipes to be erected on wall or suspended from beams, RCC roof slabs with suitable size MS bars/ angle irons including painting of metal part except pipe line.
7
1263
8841
... More
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
701.86
636
446383
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
36.55
624
22807
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
64.16
68
4363
... More
Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand & manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand.
169.16
46
7866
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
0.59
184
109
... More
Above 6.00 M to 7.00 M
0.56
305
171
... More
Above 7.00 M to 8.00 M
1.32
346
457
... More
Above 8.00 M to 9.00 M
1.32
386
510
... More
Above 9.00 M to 10.00 M
0.2
427
85
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
0.75
4170
3128
... More
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
3.13
768
2404
... More
Demolishing brick masonry including arches, stacking of serviceable
material disposal of unserviceable material within 50 metres lead.
In cement mortar.
1.82
263
479
... More
Extra for cutting reinforcement bars in R.C.C. or R.B work. (Cross sectional area of RCC/RB work to be measured)
1.06
447
474
... More
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 415
800.39
54
43621
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
54.04
297
16050
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
43.34
184
7975
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
8.19
4163
34095
... More
Extra for brick work In S/S above plinth & up to floor five level.
20.03
3384
67782
... More
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
833.5
9
7835
... More
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
310
93
28985
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
235.43
107
25191
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
107.93
91
9876
... More
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
119.93
87
10434
... More
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. Complete
533.44
4
2294
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
968.64
56
54244
... More
Steel work welded in built up sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of red oxide zinc
chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
50.4
68
3427
... More
Applying priming coat on steel work with red oxide zinc chromate primer
9.11
17
159
... More
Painting on new work (two or more coats) to give an even shade with:
20.12
55
1107
... More
Excavation in Soil (by Manual Means.) Excavation for roadway in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all liftsand lead upto1000 meters as per relevant clauses of section 300. (a) Ordinari Soil
100.37
140
14052
... More
Compacting Original Ground supporting sub-grade Loosening of the ground upto a level of 500 mm below the subgrade level , watered, graded and compacted in layers to meet requirement of table 300-2 for sub grade construction
97.37
50
4869
... More
Plain cement concrete complete as per drawing and Technical
Specifications PCC Grade M 15
1.13
2789
3152
... More
Plain cement concrete complete as per drawing and Technical. PCC Grade M 15
2.76
3768
10400
... More
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
7.5
1769
13268
... More
Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials having C.B.R.5 (unless specified otherwise in the contract) deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)
12.6
80
1008
... More
Granular Sub-base as per Table:- 400-1
Construction o granular sub base by providing close graded Mareial, , Carriage of mixed Material to work site spreading in uniform layers with motor grader on on perpared surface watering , rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401(part-II) and suitably sprinkling arrangement as per clause 401 but excluding scarifying existing bituminous surface.(A) By Mix in Place method. Disintegrated rock i.e moorum having CBB value not less than 20 and P.I. and L.L. not more than 6 and 20 respectively .
30
460
13800
... More
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
34.45
1434
49401
... More
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
14.98
2332
34933
... More
Cement Concrete Pavement (Construction of un-reinforced, dowel
jointed, plain cement concrete pavement over a prepared sub-base,
coarse and fine aggregate conforming to IS:383, and graded as per
table 600-3, mixed as per approved mix design at site, laid, spread,
vibrated, compacted and finished in a continuous operation including
provision of contraction, expansion, construction and longitudinal
joints, joint filler, separation membrane, sealant primer, joint sealant,
de-bonding strip, dowel bar, tie rod, admixtures as approved, curing
compound, finishing to lines and grades as per drawing as per clause
602.) (i) With Cement concrete grade M-40 and minimum cement content @
400 kg/cum.
14.98
4708
70526
... More
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)
1
1502
1502
... More
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level
30
371
11130
... More
Rocky strata including Boulders.
90
396
35640
... More
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.
30
424
12720
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.
32
1304
41728
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
1
217
217
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge
65
199
12935
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc.,
10
213
2130
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
451
902
... More
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
2
237
474
... More
Stop cock (600 grams)
4
237
948
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7
7300
... More
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
1
872
872
... More
Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete.
2
1334
2668
... More
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
2
1203
2406
... More
Providing and fixing 15 mm nominal bore C.P copper connection pipe with C.P brass nuts collar and PVC bush of approved quality:
4
239
956
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
5
68
343
... More
Providing and fixing stainless steel drain jali of approved make/quality.
5
51
255
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
4
278
1112
... More
Medium point
5
431
2155
... More
Long point
6
595
3570
... More
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
5
240
1200
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
3
458
1374
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
2
701
1402
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
589
589
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
934
934
... More
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
100
104
10400
... More
6x2.5 sq. mm in 20 mm conduit.
25
172
4300
... More
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
... More
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
15
76
1140
... More
providing and fixing metal clad SP&N switch fuse unit re wirable 230/250 volts , with porcelain re wireble fuse i/c drilling holes on the board, connection earting the body etc as required (Thimbeling shall be paid seperately ) (a) 32Amp
1
931
931
... More
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator
1
736
736
... More
Supplying and fixing DP MCB 240 volts C curve suitable for inductive load in the existing MCB DB Complete with connections testing and commissioning etc as required 6 amps to 32 amps
5
428
2140
... More
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
... More
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required
2
99
198
... More
180mmx 100mmx60mm deep
2
121
242
... More
200mmx 125mmx60mm deep
3
147
441
... More
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
3
1503
4509
... More
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
5
635
3175
... More
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
6
9534
57204
... More
Supplying, installation, testing and commissioning of
submersible pump set for water supply system with
submersible motor directly coupled to multi-stage
submersible pump of specified discharge capacity, head,
delivery size in existing bore well including 2 sets of
suitable size holding clamps made out of 50 mm X 6 mm
MS flat, connection with suitable submersible cable of
standard length etc. as required.
1
17633
17633
... More
Supplying and fixing following dia HDPE pipe PE-80
Grade (8kg/sqcm) in single length in the suction/ delivery
line of water supply pump etc. as required
60
62
3750
... More
Supplying, laying and fixing following size submersible
cable along with GI/PVC/HDFC pipe line or laid in ground
etc as required
95
67
6413
... More
Supplying and fixing of following sizes GM non return
valve ISI mark in the suction/ delivery line etc. as
required.
1
652
652
... More
Supplying and laying of approved make stainless steel
wire rope of 6 mm dia for support of submersible pump
set complete with tying to pump set and pump holding
clamp
60
16
990
... More
Supply, installation, testing and commissioning of 1-3 HP
1 phase submersible motor starter cum control wall/ floor
mounted type made out of not less than 1.6 mm thick MS
sheet and comprising of following panel mounting
switchgears there in including connection inter connection etc. as required.
a) Phase indicating lamps with fuses and toggle switches
1 set
b) 1/2/3 HP 1 phase DOL starter with over load and no
volt relay 1 No
c) 25 A "C" curve DPMCB 1 No
d) Voltmeter 0-250 V 1 set
e) Ammeter 0-10 A 1 se
1
4125
4125
... More
Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.
9
100
900
... More
Dismantling windows chowkhats with shutters (steel or wood) including
architrave, hold fast etc. complete and stacking within 50 metres lead..
8
66
532
... More
Dismantling asbestos sheet roofing including ridges, hips valley and
gutters and stacking the materials with 50 m lead.
77.99
16
1287
... More
Dismantling steel work in built-up section without dismembering for a span upto 10 metre and height upto 5.0 metre above plinth level including stacking with in 50 metre lead.
308.7
-
278
... More
Demolishing cement concrete including disposal of material within 50 metre lead.
2.78
549
1526
... More
1:4:8 or leaner mix
5.21
329
1714
... More
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
1.73
768
1329
... More
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
56.96
263
14980
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
66.67
91
6100
... More
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
62.21
185
11509
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
5.72
2409
13779
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
20.82
2659
55360
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
19.26
3263
62845
... More
Extra for brick work In S/S above plinth & up to floor five level.
40.1
3384
135698
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
1.16
4237
4915
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
3059.86
54
166762
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
33
4163
137379
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
0.87
469
408
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
49.7
139
6908
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
65.38
297
19418
... More
Beams, lintel, cantilevers & walls.
45.49
202
9189
... More
(D) weather shade chhajja cornies and moulding.
10.89
294
3202
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
83.24
235
19561
... More
Edge of slab breaks in floorand wall up to 200mm
54.91
34
1867
... More
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
6.57
230
1511
... More
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
62.21
65
4044
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
42.34
371
15708
... More
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
2.76
516
1424
... More
Long point
11.12
595
6616
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
158.96
73
11684
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
462.78
67
31238
... More
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
26.99
331
8934
... More
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
27.3
338
9227
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
11.02
804
8860
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
71.28
88
6273
... More
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
2.72
535
1455
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
58.6
254
14884
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
64
18
1152
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
8.15
692
5640
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
37.15
587
21807
... More
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
63.86
1151
73503
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
10.4
1832
19053
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
10
238
2380
... More
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
4
141
564
... More
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
2
44
89
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
8
57
460
... More
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
10
22
225
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
5
47
235
... More
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.23
2399
7749
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
281.73
91
25778
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
192.95
107
20646
... More
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
49.97
87
4347
... More
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
23.15
8
194
... More
Extra for lining over plaster to imitate stone or concrete block walling.
100
23
2350
... More
Neat cement punning.
14.4
33
475
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
357.33
94
33768
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
357.33
44
15901
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
255.54
56
14310
... More
Painting on new work (two or more coats) to give an even shade with:
66.49
55
3657
... More
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
... More
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
68
137
... More
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
30.35
267
8103
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
10
154
1540
... More
(B) "P" trap 110mmx110mm long
2
227
454
... More
(e) Nahani trap
3
90
272
... More
(f) Vent covel (a) 110mm.
1
44
44
... More
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
80
258
20640
... More
15 mm dia. nominal bore
1
149
149
... More
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
10
188
1880
... More
20 mm dia nominal bore
5
221
1105
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
451
902
... More
Providing and fixing stainless steel drain jali of approved make/quality.
3
51
153
... More
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
5
237
1185
... More
Stop cock (600 grams)
1
237
237
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7
7300
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
1709
3418
... More
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
1
3796
3796
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
51
91
4667
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
8
278
2224
... More
Medium point
10
431
4310
... More
Long point
6
595
3570
... More
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
8
240
1920
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
2
458
916
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
2
701
1402
... More
Long point
1
988
988
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
589
589
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
3
934
2802
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
1
1347
1347
... More
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
30
104
3120
... More
6x2.5 sq. mm in 20 mm conduit.
10
172
1720
... More
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
... More
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
7
76
532
... More
providing and fixing metal clad SP&N switch fuse unit re wirable 230/250 volts , with porcelain re wireble fuse i/c drilling holes on the board, connection earting the body etc as required (Thimbeling shall be paid seperately ) (a) 32Amp
1
931
931
... More
32 Amp TP&N
2
1191
2382
... More
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator
1
602
602
... More
Supplying and fixing DP MCB 240 volts C curve suitable for inductive load in the existing MCB DB Complete with connections testing and commissioning etc as required 6 amps to 32 amps
6
428
2568
... More
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
20
278
5560
... More
Laying of following sizes one number additional power
cable of 1.1 KV grade direct in ground in the same trench
in one tier horizontal formation including excavation, sand
cushioning, protective covering and refilling the trench etc
as required.
20
135
2700
... More
Providing and fixing round/ hexagonal fan box (125mm
dia) depth 75mm (max.) with 12mm dia steel bar hook,
1.6mm thick MS sheet cover, in RCC slab etc. as
required
7
42
298
... More
METAL, WOODEN AND PVC BOXES
6.1 Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required
2
93
187
... More
150 mm X 75 mm X 60 mm deep
1
93
94
... More
180mmx 100mmx60mm deep
1
121
121
... More
200 mm X 300 mm X 60 mm deep
5
224
1120
... More
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
7
1503
10521
... More
Supplying, installation, testing and commissioning of
following concealed type fluorescent fitting (luminaries)
complete with electronic ballast/ copper ballast glow type
starter (if required) but without fluorescent lamp, in false
ceiling hanged with 2 Nos G.I chain to ceiling/ truss frame
earthing the fitting etc. as required.
7
272
1904
... More
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required
3
967
2901
... More
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
33.36
185
6172
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
4.08
2409
9829
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
5.96
2659
15848
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
13.55
3263
44214
... More
Extra for brick work In S/S above plinth & up to floor five level.
21.24
3384
71876
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.37
4237
1568
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
1911.39
54
104171
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
18.88
4163
78597
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
0.79
469
371
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
25.83
139
3590
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
44.38
297
13181
... More
Beams, lintel, cantilevers & walls.
16.22
202
3276
... More
(D) weather shade chhajja cornies and moulding.
6.06
294
1782
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
46.72
235
10979
... More
Edge of slab breaks in floorand wall up to 200mm
35.45
34
1205
... More
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
6.4
230
1472
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
4.84
184
891
... More
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
33.36
65
2168
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
15.07
371
5591
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
239.17
73
17579
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
347.97
67
23488
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
74.23
88
6532
... More
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
2.19
535
1172
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
62.1
254
15773
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
55.83
18
1005
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
3.22
692
2228
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
16.17
587
9492
... More
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
1.38
516
712
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
12.71
1832
23285
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
238
1428
... More
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
2
141
282
... More
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
1
44
45
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
8
57
460
... More
100 x10mm
11
41
451
... More
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
22
135
... More
100 MM
10
22
220
... More
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
47
188
... More
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.61
2399
3862
... More
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1: 1:5: 3 (1 cement : 1:3 coarse sand : 3 graded stone aggregate 40mm
nominal size).
0.77
3552
2735
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
222
91
20313
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
135.42
107
14490
... More
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
90.54
87
7877
... More
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
48.4
8
407
... More
Extra for lining over plaster to imitate stone or concrete block walling.
10.06
23
236
... More
Neat cement punning.
32.38
33
1069
... More
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
192
38
7296
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
219.69
56
12303
... More
Painting on new work (two or more coats) to give an even shade with:
58.45
55
3215
... More
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
... More
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
68
137
... More
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
22.35
267
5967
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
13
154
2002
... More
(B) "P" trap 110mmx110mm long
1
227
227
... More
(e) Nahani trap
3
90
272
... More
(f) Vent covel (a) 110mm.
1
44
44
... More
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
25
258
6450
... More
15 mm dia. nominal bore
5
149
745
... More
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
5
188
940
... More
20 mm dia nominal bore
5
221
1105
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
3
451
1353
... More
Providing and fixing stainless steel drain jali of approved make/quality.
2
51
102
... More
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
4
237
948
... More
Stop cock (600 grams)
1
237
237
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
7
3650
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
1709
3418
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
5
278
1390
... More
Medium point
4
431
1724
... More
Long point
2
595
1190
... More
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
6
240
1440
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
1
458
458
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required.
1
701
701
... More
Long point
1
988
988
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
589
589
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required
1
934
934
... More
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
1
1347
1347
... More
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
55
104
5720
... More
6x2.5 sq. mm in 20 mm conduit.
25
172
4300
... More
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
... More
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
6
76
456
... More
providing and fixing metal clad SP&N switch fuse unit re wirable 230/250 volts , with porcelain re wireble fuse i/c drilling holes on the board, connection earting the body etc as required (Thimbeling shall be paid seperately ) (a) 32Amp
2
931
1862
... More
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator
1
602
602
... More
Supplying and fixing DP MCB 240 volts C curve suitable for inductive load in the existing MCB DB Complete with connections testing and commissioning etc as required 6 amps to 32 amps
4
428
1712
... More
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
... More
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
30
278
8340
... More
Laying of following sizes one number additional power
cable of 1.1 KV grade direct in ground in the same trench
in one tier horizontal formation including excavation, sand
cushioning, protective covering and refilling the trench etc
as required.
30
135
4050
... More
Providing and fixing round/ hexagonal fan box (125mm
dia) depth 75mm (max.) with 12mm dia steel bar hook,
1.6mm thick MS sheet cover, in RCC slab etc. as
required
3
42
128
... More
METAL, WOODEN AND PVC BOXES
6.1 Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required
1
93
94
... More
150 mm X 75 mm X 60 mm deep
1
99
99
... More
180mmx 100mmx60mm deep
1
121
121
... More
200mmx 125mmx60mm deep
2
147
294
... More
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
3
1503
4509
... More
Supplying, installation, testing and commissioning of
following concealed type fluorescent fitting (luminaries)
complete with electronic ballast/ copper ballast glow type
starter (if required) but without fluorescent lamp, in false
ceiling hanged with 2 Nos G.I chain to ceiling/ truss frame
earthing the fitting etc. as required.
3
272
816
... More
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
1
9534
9534
... More
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
19.75
185
3654
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
2.74
2659
7286
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
0.9
2970
2673
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
8.1
3263
26430
... More
Extra for brick work In S/S above plinth & up to floor five level.
6.44
3384
21793
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.32
4237
1356
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
639.18
54
34835
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
3.79
4163
15778
... More
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
3.09
4260
13165
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
9.06
139
1259
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
20.26
297
6017
... More
Beams, lintel, cantilevers & walls.
6.44
202
1301
... More
(D) weather shade chhajja cornies and moulding.
0.89
294
262
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
13.72
235
3224
... More
Edge of slab breaks in floorand wall up to 200mm
24.4
34
830
... More
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
19.75
65
1284
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
2.99
692
2069
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
15.36
587
9016
... More
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
7.48
1151
8609
... More
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.61
2399
3862
... More
Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
2
51
103
... More
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
1
44
45
... More
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
2
30
61
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
1.83
1832
3353
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
2
238
476
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
37.72
73
2772
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
17.82
88
1568
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
15.46
67
1044
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
75.32
91
6892
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
34.29
107
3669
... More
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
15.46
87
1345
... More
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
15.4
8
129
... More
Neat cement punning.
14.63
33
483
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
39.08
44
1739
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
55.03
56
3082
... More
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
0.68
535
364
... More
Painting on new work (two or more coats) to give an even shade with:
1.62
55
89
... More
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
... More
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
... More
Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete.
1
1334
1334
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
... More
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
20
267
5340
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
7
154
1078
... More
(B) "P" trap 110mmx110mm long
1
227
227
... More
(f) Plain reducing Tee 110x75mm
3
129
387
... More
(e) Nahani trap 110x75mm
2
90
181
... More
(f) Vent covel (a) 110mm.
1
44
44
... More
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
40
258
10320
... More
15 mm dia. nominal bore
1.5
149
224
... More
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
5
188
940
... More
20 mm dia nominal bore
5
221
1105
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
451
902
... More
Providing and fixing stainless steel drain jali of approved make/quality.
2
51
102
... More
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
2
237
474
... More
Stop cock (600 grams)
2
237
474
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
7
3650
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
1709
3418
... More
Excavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
20.29
185
3754
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
3.12
2659
8296
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
0.9
2970
2673
... More
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
9.51
3263
31031
... More
Extra for brick work In S/S above plinth & up to floor five level.
7.11
3384
24060
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.34
4237
1441
... More
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
683.4
54
37245
... More
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
5.64
4163
23479
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
0.15
469
70
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
8.62
139
1198
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
20.21
297
6002
... More
Beams, lintel, cantilevers & walls.
5.93
202
1198
... More
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
14.15
235
3325
... More
Edge of slab breaks in floorand wall up to 200mm
20.52
34
698
... More
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
20.29
65
1319
... More
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
4.17
371
1547
... More
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
17
692
11764
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
30.3
587
17786
... More
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.23
2399
7749
... More
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
7.48
1151
8609
... More
Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
4
51
206
... More
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
2
44
89
... More
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
4
30
122
... More
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
48.11
73
3536
... More
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
17.82
88
1568
... More
15 mm thick Marble work (machine cut, table rubbed & polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) mixed with matching pigment. (Area of slab should be over 0.5 sqm)
1.49
1925
2868
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
15.46
67
1044
... More
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
89.69
91
8207
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
38.62
107
4132
... More
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
8.14
87
708
... More
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
11.4
8
96
... More
Neat cement punning.
14.12
33
466
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
28.85
44
1284
... More
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
66.08
23
1520
... More
Finishing walls with water proofing cement paint of required shade to give an even shade.
66.08
41
2709
... More
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
0.68
535
364
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1.62
56
91
... More
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
2
1440
2880
... More
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
3
872
2616
... More
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
2
1203
2406
... More
Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete.
2
1334
2668
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
5
239
1195
... More
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
15
267
4005
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
7
154
1078
... More
(B) "P" trap 110mmx110mm long
2
227
454
... More
(f) Plain reducing Tee 110x75mm
3
129
387
... More
(e) Nahani trap 110x75mm
2
90
181
... More
(f) Vent covel (a) 110mm.
1
44
44
... More
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
25
258
6450
... More
15 mm dia. nominal bore
1.5
149
224
... More
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
1.5
188
282
... More
20 mm dia nominal bore
3
221
663
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
451
902
... More
Providing and fixing stainless steel drain jali of approved make/quality.
2
51
102
... More
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
4
237
948
... More
Stop cock (600 grams)
1
237
237
... More
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
451
902
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
7
3650
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
1709
3418
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%