State Warehousing Corporation Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
State Warehousing Corporation - CGSWC Tender
Opening Date3 Jan 2022
Closing Date24 Jan 2022
Tender AmountRefer Documents
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
89745Bid Award Id
ViewTender No
89745Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://http://cgswc.cg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
475.36
1263982
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
27620.86
1505336
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
241.37
1004823
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
85.79
365508
4260.5
Above 4.00 M. to 8.00 M.
42.09
183428
4358
Above 8.00 M. to 12.00 M.
0.57
2536
4450.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
328.56
45669
139
Columns-rectangular or square in shape.
(i) Up to 4m height
958.22
284591
297
Above 4.00 M. to 5.00 M.
119.36
40284
337.5
Above 5.00 M. to 6.00 M.
70.11
26501
378
Above 6.00 M. to 7.00 M.
24.39
10207
418.5
Above 7.00 M. to 8.00 M.
12.32
5654
459
Above 8.00 M. to 9.00 M.
5.91
2952
499.5
Wall of any thickness including attached pilasters, buttresses etc.
593.2
135249
228
Above 5.00 M. to 6.00 M.
39.57
8883
224.5
Above 6.00 M. to 7.00 M.
1.58
482
305.5
Above 7.00 M. to 8.00 M.
2.64
913
346
Above 8.00 M. to 9.00 M.
2.64
1020
386.5
Above 9.00 M. to 10.00 M.
2.82
1205
427
(D) weather shade chhajja cornies and moulding.
46.55
13685
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
96.28
22625
235
Edge of slab breaks in floorand wall up to 200mm
106.78
3630
34
Beams, lintel, cantilevers & walls.
143.3
28946
202
Above 5.00 M. to6.00 m
145.09
41060
283
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
491.87
1604971
3263
Extra for brick work In S/S above plinth & up to floor five level.
234.18
792465
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
229.57
804642
3505
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
737.93
47965
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
5979.11
2218249
371
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like. 40 mm. wide
586.85
10563
18
60 mm. Wide
4233.6
105840
25
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
1350.78
91853
68
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
530.76
134813
254
75mm thick
2656.83
916606
345
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5054.61
462496
91.5
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
19.95
11710
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
5.04
3487
692
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
62.71
72179
1151
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
3.74
1754
469
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1707.24
150237
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1189.07
80262
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
41.06
13590
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
48.23
16301
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
12.04
9680
804
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
56.82
30398
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
107.16
181207
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
19.76
6461
327
Providing and fixing 27.5cm. long wire spring for rolling shutters.
96
34752
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
97.13
38754
399
Providing andfixing ball bearing for rolling shutters.
96
40608
423
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
137.17
10081
73.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
131.22
74664
569
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
27.87
51057
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
14
3332
238
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
7
595
85
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
14
987
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
14
343
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
7
329
47
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
28
3444
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.81
4342
2399
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4819.32
450606
93.5
Above 5.00 M. height.
33644.48
3236598
96.2
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
1095.75
129298
118
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
125.55
78343
624
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
3161.07
2010440
636
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
191.2
20458
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
512.88
44620
87
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
204
10819
69
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
19.95
7620
382
Extra for lining over plaster to imitate stone or concrete block walling.
828.78
19476
23.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
12.94
53966
4170.5
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
2486.47
145458
58.5
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
314.53
29723
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
304.89
11585
38
Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
2484.15
101850
41
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
353.48
8130
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2714.39
152005
56
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
23.1
1270
55
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
20541
147895
7.2
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
737.93
136517
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
92.52
222880
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
475.36
1263982
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
27620.86
1505336
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
241.37
1004823
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
85.79
365508
4260.5
Above 4.00 M. to 8.00 M.
42.09
183428
4358
Above 8.00 M. to 12.00 M.
0.57
2536
4450.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
328.56
45669
139
Columns-rectangular or square in shape.
(i) Up to 4m height
958.22
284591
297
Above 4.00 M. to 5.00 M.
119.36
40284
337.5
Above 5.00 M. to 6.00 M.
70.11
26501
378
Above 6.00 M. to 7.00 M.
24.39
10207
418.5
Above 7.00 M. to 8.00 M.
12.32
5654
459
Above 8.00 M. to 9.00 M.
5.91
2952
499.5
Wall of any thickness including attached pilasters, buttresses etc.
593.2
135249
228
Above 5.00 M. to 6.00 M.
39.57
8883
224.5
Above 6.00 M. to 7.00 M.
1.58
482
305.5
Above 7.00 M. to 8.00 M.
2.64
913
346
Above 8.00 M. to 9.00 M.
2.64
1020
386.5
Above 9.00 M. to 10.00 M.
2.82
1205
427
(D) weather shade chhajja cornies and moulding.
46.55
13685
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
96.28
22625
235
Edge of slab breaks in floorand wall up to 200mm
106.78
3630
34
Beams, lintel, cantilevers & walls.
143.3
28946
202
Above 5.00 M. to6.00 m
145.09
41060
283
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
491.87
1604971
3263
Extra for brick work In S/S above plinth & up to floor five level.
234.18
792465
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
229.57
804642
3505
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
737.93
47965
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
5979.11
2218249
371
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like. 40 mm. wide
586.85
10563
18
60 mm. Wide
4233.6
105840
25
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
1350.78
91853
68
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
530.76
134813
254
75mm thick
2656.83
916606
345
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5054.61
462496
91.5
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
19.95
11710
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
5.04
3487
692
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
62.71
72179
1151
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
3.74
1754
469
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1707.24
150237
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1189.07
80262
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
41.06
13590
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
48.23
16301
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
12.04
9680
804
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
56.82
30398
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
107.16
181207
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
19.76
6461
327
Providing and fixing 27.5cm. long wire spring for rolling shutters.
96
34752
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
97.13
38754
399
Providing andfixing ball bearing for rolling shutters.
96
40608
423
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
137.17
10081
73.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
131.22
74664
569
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
27.87
51057
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
14
3332
238
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
7
595
85
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
14
987
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
14
343
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
7
329
47
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
28
3444
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.81
4342
2399
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4819.32
450606
93.5
Above 5.00 M. height.
33644.48
3236598
96.2
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
1095.75
129298
118
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
125.55
78343
624
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
3161.07
2010440
636
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
191.2
20458
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
512.88
44620
87
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
204
10819
69
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
19.95
7620
382
Extra for lining over plaster to imitate stone or concrete block walling.
828.78
19476
23.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
12.94
53966
4170.5
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
2486.47
145458
58.5
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
314.53
29723
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
304.89
11585
38
Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
2484.15
101850
41
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
353.48
8130
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2714.39
152005
56
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
23.1
1270
55
Providing and fixing water closet squatting pan (Indian type W.C. pan ),
100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing
cistern (same colour) conforming to IS : 7231, with flush bend and
other fittings and fixtures complete including cutting and making good
the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm
5
12295
2459
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Size 550x450 mm
6
8580
1430
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :
345x445 mm bowl depth 200 mm.
2
12596
6298
Providing and fixing white vitreous china urinal basin with waste fitting
as per IS : 2556, and other couplings in C.P. brass complete:
Flat back type urinal of size 460x380x250mm
3
4587
1529
Providing and fixing vitreous china water closet (European type W.C.
pan) with white ISI marked plastic seat and lid, 10 litre low level white
P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the
walls and floors wherever required : White pedestal type
1
2882
2882
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
12
822
68.5
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats
including S.W. drain pipe 100 mm diameter and 1.20 m long complete as
per standard design.
4
6836
1709
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
75 mm dia pipe.
60
10920
182
110 mm dia pipe.
70
18690
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
18
2772
154
(d) Vent covel 75 mm
4
136
34
(e) Nahani trap 110x75mm
10
905
90.5
(f) Plain reducing Tee 110x75mm
15
1935
129
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete 150mm thick as per standard design:
100 mm diameter S.W. pipe
109
38913
357
Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160
mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)
12 mm thick finished with a floating coat of neat cement complete as per
standard design :
6
27864
4644
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of
approved design to Rigid PVC pipes by means of 50x50x50mm hard
wood plugs, screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete.
75 mm
60
3420
57
110 mm
70
4270
61
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the
walls etc., 15 mm nominal outer dia .Pipes
40
5320
133
20 mm nominal outer dia .Pipes
110
18370
167
25 mm nominal outer dia .Pipes.
160
34080
213
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
11
4961
451
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting
and threading the pipe and making long screws etc. complete:
approved quality (screwed end) : 25 mm nominal bore
8
1568
196
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
18
6876
382
Long nose bib cock (500 grams)
4
1820
455
Stop cock (concealed) (600 grams)
18
8892
494
Piller Cock (400 grams)
6
2388
398
Shower rose (revolving type) (150mm)
5
1345
269
Angle valve for basin mixer and geyser points (450 grams)
13
4966
382
Providing and fixing stainless steel drain jali of approved make/quality.
10
510
51
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
29200
7.3
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 25 mm dia nominal bore
134
39798
297
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
Medium point
35
15085
431
Long point
26
15470
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
50
12000
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
6
5928
988
Extra Long Point I
10
13850
1385
Extra Long Point II
15
26820
1788
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
18
24246
1347
Long point
8
14656
1832
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
750
78000
104
6x2.5 sq. mm in 20 mm conduit.
210
36120
172
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
15
637
42.5
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
6
1626
271
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
38
17328
456
Fan regulator (two module size) electronic stepped type
moving all rounds
15
3045
203
Batten/ angle holder
53
2173
41
Ceiling rose 3 pin 5 amp
53
1908
36
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
15
22545
1503
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
50
31750
635
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
50
2550
51
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
18
15822
879
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
12
114408
9534
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
4
2944
736
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
Medium point
35
15085
431
Long point
26
15470
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
50
12000
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
6
5928
988
Extra Long Point I
10
13850
1385
Extra Long Point II
15
26820
1788
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
18
24246
1347
Long point
8
14656
1832
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
750
78000
104
6x2.5 sq. mm in 20 mm conduit.
210
36120
172
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
15
637
42.5
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
6
1626
271
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
38
17328
456
Fan regulator (two module size) electronic stepped type
moving all rounds
15
3045
203
Batten/ angle holder
53
2173
41
Ceiling rose 3 pin 5 amp
53
1908
36
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
15
22545
1503
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
50
31750
635
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
50
2550
51
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
18
15822
879
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
12
114408
9534
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
4
2944
736
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
50.72
9383
185
Providing and laying nominal mixed cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth & at ground level excluding cost of form work. 1:5:10 (1 cement : 5 course sand : 10 graded stone aggregate 40 mm. Nominal size)
4.54
10936
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
11.21
29807
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
19.94
65064
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
30.61
103584
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.63
2669
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2416.99
131725
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
11.4
47458
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
17.98
76603
4260.5
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
0.76
356
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
39.06
5429
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
70.86
21045
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
32.71
6607
202
(D) weather shade chhajja cornies and moulding.
12.98
3816
294
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
76.9
18071
235
(F) Edge of slab breaks in floorand wall up to 200mm
47.2
1604
34
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
50.72
3296
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
31.33
11623
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
135.42
9953
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
205.63
13880
67.5
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2mm and braced with flat iron diagonals 20x5mm size
with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys
complete with bolts, nuts, locking arrangement stoppers, handles
including applying a priming coat of red oxide zinc chromate primer.
3.84
12787
3330
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
30.32
10035
331
Extra for powder coated (minimum 50 micron) aluminium sections instead
of anodized.
31.08
10505
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm thickness
12.01
9656
804
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.(a) 50mm thick
45.54
11567
254
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.
(a) 40 mm. wide
26.4
475
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.
(A) Size 300x300mm
11
7612
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.
(A) Size up to 200x300mm
26.16
15355
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
64.02
73687
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
6.43
11779
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
6
846
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
3
133
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
6
345
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
3
141
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
4.84
11611
2399
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
223.07
20410
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
130.18
13929
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
112.48
9785
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
69.9
587
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
14.99
494
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
302.58
28593
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
302.58
13464
44.5
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
137.74
3168
23
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
138.91
5695
41
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
46.43
2600
56
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
3
4320
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
3
3609
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
2
1744
872
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
5
1195
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
6
411
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
20
5340
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
5
770
154
(B) "P" trap 110mmx110mm long
3
681
227
(e) Nahani trap
8
724
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
20
5160
258
15 mm dia. nominal bore
1
149
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
10
1880
188
20 mm dia nominal bore
6
1326
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
8
408
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
10
2370
237
Stop cock (600 grams)
8
1896
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7300
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
61.06
11296
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
23.77
63204
2659
Providing and laying precast cement concrete block in masonry work with
precast blocks having crushing strength 75 kg/sqcm in cement mortar
1:6(1 Cement :6 coarse sand ) .(To be used in boundary wall and plaster
shall not be done.)
20.59
96361
4680
Extra for brick work In S/S above plinth & up to floor five level.
43.29
146493
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
1.16
4914
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thermo-Mechanically treated bars FE 415
3616.96
167971
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
15.7
65359
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
22.58
96202
4260.5
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level. Foundations, footing, base of columns and plinth beam in any shape and size
79.04
10986
139
Columns-rectangular or square in shape.Up to 4m height
74.85
22230
297
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
56.32
11376
202
weather shade chhajja cornies and moulding.
19.75
5806
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
93.08
21873
235
Edge of slab breaks in floorand wall up to 200mm
71.2
2420
34
(C) Window sill,anchore string course bend coping bed plate and like (i) Up to 4.00 M. height from P.L.
8.15
1499
184
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
9.78
2249
230
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
59.31
3855
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
106.2
39400
371
25mm thick Local RAJIM/ Red Flag stone slab in riser of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:4 (1 cement : 4 coarse sand)
and joint with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
11.12
6616
595
Providing and fixing M.S. frames of doors, windows, ventilators and
cupboards joints mitred and welded with 15x3 mm lugs 10cm long
embedded in cement concrete blocks 15x10x10cm of grade M-10 or with
wooden plugs and screws or with dash fastener or rawl plugs and screws
or with fixing clips or with bolts and nuts as required including fixing of
necessary butt hinges and screws and applying a priming coat of
approved steel primer. Angle-iron frames
158.96
11683
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or
square or round bars welded to steel frame of windows etc. including
applying a priming coat welded to frame with all necessary fitting complete
including applying a priming of red oxide zinc chromate primer.
177.35
11971
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
26.99
8933
331
Extra for powder coated (minimum 50 micron) aluminium sections instead
of anodized.
27.3
9227
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm thickness
11.02
7802
708
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
71.84
18247
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
88.4
1591
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
8.4
5812
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
36.96
21695
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
88.9
102323
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
14.25
26106
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod,
2.5mm thick flap, necessary stainless steel nuts bolts and screws etc
complete. 250mm
7
1596
228
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
7
493
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
14
343
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
7
329
47
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
7
595
85
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
21
2583
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.36
8060
2399
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
281.73
25778
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
305.34
32671
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
196.44
17090
87
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
27.54
908
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
321.32
30364
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
321.32
12210
38
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
296.98
6830
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
255.54
14310
56
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
3.08
1176
382
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
2
8341
4170.5
Painting on new work (Two or more coats) to give an even shade with: Satin synthetic enamel paint
10.7
599
56
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
34
1870
55
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
56.11
10380
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
12.15
32306
2659
Providing and laying precast cement concrete block in masonry work with
precast blocks having crushing strength 75 kg/sqcm in cement mortar
1:6(1 Cement :6 coarse sand ) .(To be used in boundary wall and plaster
shall not be done.)
21.54
100807
4680
Extra for brick work in superstructure above plinth level for every floor or
part thereof in addition to rate for foundation and plinth:
26.27
126122
4801
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.39
1652
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2183.84
119019
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
7.75
32263
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
12.45
53043
4260.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
44.53
6189
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
55.68
16536
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
18.64
3765
202
(D) weather shade chhajja cornies and moulding.
6.77
1990
294
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
52
12220
235
(F) Edge of slab breaks in floorand wall up to 200mm
51.95
1766
34
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
9.46
2175
230
(C) Window sill,anchore string course bend coping bed plate and like (i) Up to 4.00 M. height from P.L.
7.46
1372
184
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
41.71
2711
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
51.1
18958
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
91.95
6758
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
207.12
13980
67.5
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
1.44
770
535
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
21.16
5374
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
44.4
799
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
3.68
2546
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
18.01
10571
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
36.64
42172
1151
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
1.38
712
516
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
10.4
19052
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
4
912
228
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
4
282
70.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
0.63
2627
4170.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
8
196
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.68
4030
2399
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1: 1:5: 3 (1 cement : 1:3 coarse sand : 3 graded stone aggregate 40mm
nominal size).
1.59
5647
3552
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
210.58
19268
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
259.17
27731
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
79.14
6885
87
Extra for lining over plaster to imitate stone or concrete block walling.
30.62
719
23.5
Neat cement punning.
42.03
1386
33
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
193.47
7351
38
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
181.16
4166
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
175.51
9828
56
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
16
5296
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
22
7436
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness
6.38
4517
708
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
3.08
1176
382
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
181.16
17119
94.5
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
18.67
1026
55
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
9.91
579
58.5
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
4
340
85
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
12
1476
123
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
51.06
9446
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
12.08
32120
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
21.67
70709
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
18.17
61487
3384
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
1936.87
105559
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
11.51
47916
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
6.1
25989
4260.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
36.38
5056
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
38.4
11404
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
11.08
2238
202
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
26.6
6251
235
(F) Edge of slab breaks in floorand wall up to 200mm
30.4
1033
34
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
3.13
575
184
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
51.06
3318
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
39.79
14762
371
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
58.87
14952
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
27.6
496
18
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
381.85
35702
93.5
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
3.36
6155
1832
Sliding Bolt
2
456
228
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
2
141
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
4
98
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
2
170
85
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
6
738
123
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
39.11
2639
67.5
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
38.1
13220
347
Neat cement punning.
22.74
750
33
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
131.91
12069
91.5
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
22.72
1976
87
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
214.97
23001
107
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
122.58
2819
23
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
113.97
10770
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
321.32
12210
38
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
357.21
20003
56
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
28.76
1682
58.5
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
538.27
99579
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
45
119655
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
16539.6
901408
54.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
547.6
76116
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
596.96
177297
297
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
195
35880
184
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
173.97
724237
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
38.94
165903
4260.5
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
27.6
90058
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
230.46
779876
3384
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1950
208650
107
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
1350
99225
73.5
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
20.61
1793
87
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1800
164700
91.5
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
538.27
34987
65
Extra for lining over plaster to imitate stone or concrete block walling.
770.4
18104
23.5
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
5250
49350
9.4
Providing and fixing concertina coil fencing with required dia 610 mm
(having 50 nos. round per 6 metre length) up to 3m height of wall with
existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I.
staples and G.I. clips to retain horizontal including necessary bolts or G.I.
barbed wire tied to angle iron all complete as per direction of Engineer-incharge
with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick)
wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick)
and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid
separately)
750
123000
164
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
3337.82
186917
56
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
541
50583
93.5
Excavation for Structures (Earth work in excavation of foundation
of structures as per drawing and technical specification, including
setting out, construction of shoring and bracing, removal of stumps
and other deleterious matter, dressing of sides and bottom and
backfilling with approved material.) Ordinary soil Up to 3 m depth
37.26
5439
146
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire,
placing in position , providing shuttering and concreting by using
concrete mixer, compaction by vibration etc complete as per
drawings and technical specifications.
250
648000
2592
Compacting Original Ground supporting embankment
Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
1154.7
32331
28
Construction of sub-grade with Material Obtained from
Borrow Pits/Borrow Area (Construction of sub-grade with
approved material/selected soil having C.B.R.8 (unless specified
otherwise in the contract) obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2)
2790
697500
250
Plain cement concrete complete as per drawing and Technical. PCC Grade M 15
7.16
26978
3768
PCC Grade M 20
26.14
109108
4174
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
40
70760
1769
600 mm dia
12.5
30737
2459
Granular Sub-base as per Table:- 400-1
Construction o granular sub base by providing close graded Mareial, , Carriage of mixed Material to work site spreading in uniform layers with motor grader on on perpared surface watering , rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401(part-II) and suitably sprinkling arrangement as per clause 401 but excluding scarifying existing bituminous surface.(A) By Mix in Place method. Disintegrated rock i.e moorum having CBB value not less than 20 and P.I. and L.L. not more than 6 and 20 respectively .
2324.4
1069224
460
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
1535.71
2202208
1434
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
642.1
1497377
2332
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base, coarse and fine aggregate conforming to IS:383, and graded as per table 600-3, mixed as per approved mix design at site, laid, spread, vibrated, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per clause 602.)
(a) With Cement concrete grade M-40 and minimum cement content @ 400 kg/cum.
1695.94
7984485
4708
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
20541
147895
7.2
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
512.85
94877
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
62.89
151502
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
325.55
865637
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
22083.58
1203555
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
156.05
649636
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
65.14
277528
4260.5
Above 4.00 M. to 8.00 M.
29.97
130609
4358
Above 8.00 M. to 12.00 M.
0.46
2047
4450.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
243.73
33878
139
Columns-rectangular or square in shape.
(i) Up to 4m height
649.67
192951
297
Above 4.00 M. to 5.00 M.
83.68
28242
337.5
Above 5.00 M. to 6.00 M.
50.15
18956
378
Above 6.00 M. to 7.00 M.
19.01
7955
418.5
Above 7.00 M. to 8.00 M.
9.6
4406
459
Above 8.00 M. to 9.00 M.
4.61
2302
499.5
Wall of any thickness including attached pilasters, buttresses etc.
420.46
95864
228
Above 5.00 M. to 6.00 M.
26.38
5922
224.5
Above 6.00 M. to 7.00 M.
1.18
360
305.5
Above 7.00 M. to 8.00 M.
1.98
685
346
Above 8.00 M. to 9.00 M.
1.98
765
386.5
Above 9.00 M. to 10.00 M.
2.12
904
427
(D) weather shade chhajja cornies and moulding.
39.88
11724
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
96.28
22625
235
Edge of slab breaks in floorand wall up to 200mm
106.78
3630
34
Beams, lintel, cantilevers & walls.
95.35
19260
202
Above 5.00 M. to6.00 m
98.42
27852
283
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
330.7
1079074
3263
Extra for brick work In S/S above plinth & up to floor five level.
273.04
923967
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
172.4
604262
3505
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
512.85
33335
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
3884.44
1441127
371
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like. 40 mm. wide
412.92
7432
18
60 mm. Wide
2822.4
70560
25
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
853.6
58044
68
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
357.08
90698
254
75mm thick
1771.22
611070
345
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
3572.49
326882
91.5
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
19.95
11710
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
5.04
3487
692
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
62.71
72179
1151
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
2.77
1299
469
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1105.44
97278
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
825.93
55750
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
27.38
9062
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
43.32
14642
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
8.16
6560
804
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
37.88
20265
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
71.44
120805
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
13.18
4309
327
Providing and fixing 27.5cm. long wire spring for rolling shutters.
64
23168
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
64.75
25835
399
Providing andfixing ball bearing for rolling shutters.
64
27072
423
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
97.3
7151
73.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
40.61
23107
569
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
19.14
35064
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
10
2380
238
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
5
425
85
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
10
705
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
10
245
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
5
235
47
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
20
2460
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.81
4342
2399
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
2871.82
268515
93.5
Above 5.00 M. height.
22424.81
2157266
96.2
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
581.7
68640
118
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
83.7
52228
624
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
2237.58
1423100
636
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
160.2
17141
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
420.16
36553
87
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
156.8
10819
69
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
16.38
6257
382
Extra for lining over plaster to imitate stone or concrete block walling.
460.92
10831
23.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
7.95
33155
4170.5
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
1619.87
94762
58.5
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
290.3
27433
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
289.2
10989
38
Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
1669.46
68447
41
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
307.21
7065
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2234.07
125107
56
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
23.1
1270
55
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
Medium point
31
13361
431
Long point
20
11900
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
27
6480
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
4
3952
988
Extra Long Point I
4
5540
1385
Extra Long Point II
8
14304
1788
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
16
21552
1347
Long point
4
7328
1832
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
550
57200
104
6x2.5 sq. mm in 20 mm conduit.
160
27520
172
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
14
595
42.5
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
28
12768
456
Fan regulator (two module size) electronic stepped type
moving all rounds
14
2842
203
Batten/ angle holder
58
2378
41
Ceiling rose 3 pin 5 amp
58
2088
36
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
11
16533
1503
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
40
25400
635
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
40
2040
51
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
12
10548
879
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
8
76272
9534
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
3
2208
736
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
Excavation for Structures (Earth work in excavation of foundation
of structures as per drawing and technical specification, including
setting out, construction of shoring and bracing, removal of stumps
and other deleterious matter, dressing of sides and bottom and
backfilling with approved material.) Ordinary soil Up to 3 m depth
37.26
5439
146
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire,
placing in position , providing shuttering and concreting by using
concrete mixer, compaction by vibration etc complete as per
drawings and technical specifications.
150
388800
2592
Compacting Original Ground supporting embankment
Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
669.45
18744
28
Construction of sub-grade with Material Obtained from
Borrow Pits/Borrow Area (Construction of sub-grade with
approved material/selected soil having C.B.R.8 (unless specified
otherwise in the contract) obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2)
1745
436250
250
Plain cement concrete complete as per drawing and Technical. PCC Grade M 15
7.16
26978
3768
PCC Grade M 20
26.14
109108
4174
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
40
70760
1769
600 mm dia
12.5
30737
2459
Granular Sub-base as per Table:- 400-1
Construction o granular sub base by providing close graded Mareial, , Carriage of mixed Material to work site spreading in uniform layers with motor grader on on perpared surface watering , rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401(part-II) and suitably sprinkling arrangement as per clause 401 but excluding scarifying existing bituminous surface.(A) By Mix in Place method. Disintegrated rock i.e moorum having CBB value not less than 20 and P.I. and L.L. not more than 6 and 20 respectively .
1337.7
615342
460
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
901.14
1292234
1434
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
378.6
882895
2332
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base, coarse and fine aggregate conforming to IS:383, and graded as per table 600-3, mixed as per approved mix design at site, laid, spread, vibrated, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per clause 602.)
(a) With Cement concrete grade M-40 and minimum cement content @ 400 kg/cum.
757.2
3564897
4708
Excavation in Soil (by Manual Means.) Excavation for roadway in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all liftsand lead upto1000 meters as per relevant clauses of section 300. (a) Ordinari Soil
892.6
124964
140
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
512.85
94877
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
62.89
151502
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
325.55
865637
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
22083.58
1203555
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
156.05
649636
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
65.14
277528
4260.5
Above 4.00 M. to 8.00 M.
29.97
130609
4358
Above 8.00 M. to 12.00 M.
0.46
2047
4450.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
243.73
33878
139
Columns-rectangular or square in shape.
(i) Up to 4m height
649.67
192951
297
Above 4.00 M. to 5.00 M.
83.68
28242
337.5
Above 5.00 M. to 6.00 M.
50.15
18956
378
Above 6.00 M. to 7.00 M.
19.01
7955
418.5
Above 7.00 M. to 8.00 M.
9.6
4406
459
Above 8.00 M. to 9.00 M.
4.61
2302
499.5
Wall of any thickness including attached pilasters, buttresses etc.
420.46
95864
228
Above 5.00 M. to 6.00 M.
26.38
5922
224.5
Above 6.00 M. to 7.00 M.
1.18
360
305.5
Above 7.00 M. to 8.00 M.
1.98
685
346
Above 8.00 M. to 9.00 M.
1.98
765
386.5
Above 9.00 M. to 10.00 M.
2.12
904
427
(D) weather shade chhajja cornies and moulding.
39.88
11724
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
96.28
22625
235
Edge of slab breaks in floorand wall up to 200mm
106.78
3630
34
Beams, lintel, cantilevers & walls.
95.35
19260
202
Above 5.00 M. to6.00 m
98.42
27852
283
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
330.7
1079074
3263
Extra for brick work In S/S above plinth & up to floor five level.
273.04
923967
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
172.4
604262
3505
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
512.85
33335
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
3884.44
1441127
371
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like. 40 mm. wide
412.92
7432
18
60 mm. Wide
2822.4
70560
25
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
853.6
58044
68
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
357.08
90698
254
75mm thick
1771.22
611070
345
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
3572.49
326882
91.5
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
19.95
11710
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
5.04
3487
692
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
62.71
72179
1151
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
2.77
1299
469
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1105.44
97278
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
825.93
55750
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
27.38
9062
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
43.32
14642
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
8.16
6560
804
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
37.88
20265
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
71.44
120805
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
13.18
4309
327
Providing and fixing 27.5cm. long wire spring for rolling shutters.
64
23168
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
64.75
25835
399
Providing andfixing ball bearing for rolling shutters.
64
27072
423
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
97.3
7151
73.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
40.61
23107
569
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
19.14
35064
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
10
2380
238
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
5
425
85
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
10
705
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
10
245
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
5
235
47
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
20
2460
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.81
4342
2399
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
2871.82
268515
93.5
Above 5.00 M. height.
22424.81
2157266
96.2
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
581.7
68640
118
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
83.7
52228
624
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
2237.58
1423100
636
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
160.2
17141
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
420.16
36553
87
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
156.8
10819
69
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
16.38
6257
382
Extra for lining over plaster to imitate stone or concrete block walling.
460.92
10831
23.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
7.95
33155
4170.5
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
1619.87
94762
58.5
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
290.3
27433
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
289.2
10989
38
Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
1669.46
68447
41
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
307.21
7065
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2234.07
125107
56
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
23.1
1270
55
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
20541
147895
7.2
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
737.93
136517
185
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
92.52
222880
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
475.36
1263982
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
27620.86
1505336
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
241.37
1004823
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
85.79
365508
4260.5
Above 4.00 M. to 8.00 M.
42.09
183428
4358
Above 8.00 M. to 12.00 M.
0.57
2536
4450.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
328.56
45669
139
Columns-rectangular or square in shape.
(i) Up to 4m height
958.22
284591
297
Above 4.00 M. to 5.00 M.
119.36
40284
337.5
Above 5.00 M. to 6.00 M.
70.11
26501
378
Above 6.00 M. to 7.00 M.
24.39
10195
418
Above 7.00 M. to 8.00 M.
12.32
5654
459
Above 8.00 M. to 9.00 M.
5.91
2952
499.5
Wall of any thickness including attached pilasters, buttresses etc.
593.2
135249
228
Above 5.00 M. to 6.00 M.
39.57
8863
224
Above 6.00 M. to 7.00 M.
1.58
482
305.5
Above 7.00 M. to 8.00 M.
2.64
913
346
Above 8.00 M. to 9.00 M.
2.64
1019
386
Above 9.00 M. to 10.00 M.
2.82
1205
427
(D) weather shade chhajja cornies and moulding.
46.55
13685
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
96.28
22625
235
Edge of slab breaks in floorand wall up to 200mm
106.78
3630
34
Beams, lintel, cantilevers & walls.
143.3
28946
202
Above 5.00 M. to6.00 m
145.09
41060
283
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
491.87
1604971
3263
Extra for brick work In S/S above plinth & up to floor five level.
234.18
792465
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
229.57
804642
3505
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
737.93
47965
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
5979.11
2218249
371
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like. 40 mm. wide
586.85
10563
18
60 mm. Wide
4233.6
105840
25
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar
works.
1350.78
91853
68
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
530.76
134813
254
75mm thick
2656.83
916606
345
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5054.61
462496
91.5
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
19.95
11710
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
5.04
3487
692
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
62.71
72179
1151
Extra for precast PCC/ RCC work of any mix including form work, hoisting
and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing
with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but
excluding reinforcement.
3.74
1754
469
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1707.24
150237
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1189.07
80262
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
41.06
13590
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
48.23
16301
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
12.04
9680
804
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
56.82
30398
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
107.16
181207
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
19.76
6461
327
Providing and fixing 27.5cm. long wire spring for rolling shutters.
96
34752
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
97.13
38754
399
Providing andfixing ball bearing for rolling shutters.
96
40608
423
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
137.17
10081
73.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
131.22
74664
569
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
27.87
51057
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
14
3332
238
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
7
595
85
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
14
987
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
14
343
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
7
329
47
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
28
3444
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.81
4342
2399
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4819.32
450606
93.5
Above 5.00 M. height.
33644.48
3236598
96.2
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
1095.75
129298
118
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : Crimp curve
125.55
78343
624
Supply and fixing of precoated galvanized iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/-
5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in
240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet
and polyester top coat 15-18 microns. Sheet should have protective guard
film of 25 microns minimum to avoid scratches while transportation and
should be supplied in single length upto 12 metre or as desired by
Engineer-in-charge. The sheet shall be fixed using self drilling /self
tapping screws of size (5.5x 55mm) with EPDM seal or with polymer
coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.
limpet washers or with G.I. limpet washers filled with white lead complete
upto any pitch in horizontal/ vertical or curved surfaces excluding the cost
of purlins, rafters and trusses and including cutting to size and shape
wherever required.
3161.07
2010440
636
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
191.2
20458
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
512.88
44620
87
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
204
10819
69
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
19.95
7620
382
Extra for lining over plaster to imitate stone or concrete block walling.
828.78
19476
23.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
12.94
53966
4170.5
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
2486.47
145458
58.5
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
314.53
29723
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
304.89
11585
38
Finishing walls with water proofing cement paint of required shade to give an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
2484.15
101850
41
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
353.48
8130
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2714.39
152005
56
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
23.1
1270
55
Providing and fixing water closet squatting pan (Indian type W.C. pan ),
100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing
cistern (same colour) conforming to IS : 7231, with flush bend and
other fittings and fixtures complete including cutting and making good
the walls and floors wherever required : White Long pattern W.C. pan of size 580 mm
5
12295
2459
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Size 550x450 mm
6
8580
1430
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :
345x445 mm bowl depth 200 mm.
2
12596
6298
Providing and fixing white vitreous china urinal basin with waste fitting
as per IS : 2556, and other couplings in C.P. brass complete:
Flat back type urinal of size 460x380x250mm
3
4587
1529
Providing and fixing vitreous china water closet (European type W.C.
pan) with white ISI marked plastic seat and lid, 10 litre low level white
P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the
walls and floors wherever required : White pedestal type
1
2882
2882
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
12
822
68.5
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats
including S.W. drain pipe 100 mm diameter and 1.20 m long complete as
per standard design.
4
6836
1709
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
75 mm dia pipe.
60
10920
182
110 mm dia pipe.
70
18690
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
18
2772
154
(d) Vent covel 75 mm
4
136
34
(e) Nahani trap 110x75mm
10
905
90.5
(f) Plain reducing Tee 110x75mm
15
1935
129
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete 150mm thick as per standard design:
100 mm diameter S.W. pipe
109
38913
357
Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160
mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)
12 mm thick finished with a floating coat of neat cement complete as per
standard design :
6
27864
4644
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of
approved design to Rigid PVC pipes by means of 50x50x50mm hard
wood plugs, screwed with M.S. screws of required length including
cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse
sand) and making good the wall etc. complete.
75 mm
60
3420
57
110 mm
70
4270
61
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the
walls etc., 15 mm nominal outer dia .Pipes
40
5320
133
20 mm nominal outer dia .Pipes
110
18370
167
25 mm nominal outer dia .Pipes.
160
34080
213
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
11
4961
451
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting
and threading the pipe and making long screws etc. complete:
approved quality (screwed end) : 25 mm nominal bore
8
1568
196
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
18
6876
382
Long nose bib cock (500 grams)
4
1820
455
Stop cock (concealed) (600 grams)
18
8892
494
Piller Cock (400 grams)
6
2388
398
Shower rose (revolving type) (150mm)
5
1345
269
Angle valve for basin mixer and geyser points (450 grams)
13
4966
382
Providing and fixing stainless steel drain jali of approved make/quality.
10
510
51
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
29200
7.3
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 25 mm dia nominal bore
134
39798
297
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
10
3820
382
Angle valve for basin mixer and geyser points (450 grams)
4
1528
382
Long nose bib cock (500 grams)
4
1820
455
Shower rose (revolving type) (150mm)
4
1076
269
Stop cock (concealed) (600 grams)
20
9880
494
Providing and fixing stainless steel drain jali of approved make/quality.
10
510
51
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):
40 mm nominal bore
4
2384
596
25 mm nominal bore
2
872
436
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete : 20 mm nominal bore
2
788
394
15 mm nominal bore
2
568
284
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the
walls etc.,
25 mm nominal outer dia .Pipes.
150
31950
213
20 mm nominal outer dia .Pipes
80
13360
167
15 mm nominal outer dia .Pipes
20
2660
133
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
29200
7.3
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
Medium point
31
13361
431
Long point
20
11900
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
27
6480
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
4
3952
988
Extra Long Point I
4
5540
1385
Extra Long Point II
8
14304
1788
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
16
21552
1347
Long point
4
7328
1832
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
550
57200
104
6x2.5 sq. mm in 20 mm conduit.
160
27520
172
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
14
595
42.5
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
28
12768
456
Fan regulator (two module size) electronic stepped type
moving all rounds
14
2842
203
Batten/ angle holder
58
2378
41
Ceiling rose 3 pin 5 amp
58
2088
36
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
11
16533
1503
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
40
25400
635
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
40
2040
51
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
12
10548
879
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
8
76272
9534
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
3
2208
736
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
Wiring for light/ fan/ exhaust fan / call bell point with 1.5
sqmm FR PVC insulated stranded copper conductor
single core cable in concealed PVC conduit, with 5 amp
modular switch, modular base and cover plate, suitable
size G.I. box and earthing the point with same size cable
as required. Short Point
27
7506
278
Medium point
35
15085
431
Long point
26
15470
595
Extra for providing and fixing light plug point on board in
concealed PVC conduit point wiring with modular type 3
pin 5 amp socket outlet and 5 amp switch including cost
of base and cover plate and G. I. box etc. as required.
50
12000
240
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 6 Amp switch and 3
pin 6 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
6
5928
988
Extra Long Point I
10
13850
1385
Extra Long Point II
15
26820
1788
Wiring for power plug point with 2x4 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with modular type 16 Amp switch and
6 pin 16 amps socket outlet with modular base and cover
plate, suitable size G.I. box, earthing the switch box and
socket outlet with same size cable etc. as required. Long Point
18
24246
1347
Long point
8
14656
1832
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
750
78000
104
6x2.5 sq. mm in 20 mm conduit.
210
36120
172
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
15
637
42.5
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
6
1626
271
Supplying and fixing DP MCB, 240 volts, 'D' curve,
suitable for inductive/ motor load in the existing MCB DB
complete with connections, testing and commissioning
etc. as required.6 amps. to 32 amps
38
17328
456
Fan regulator (two module size) electronic stepped type
moving all rounds
15
3045
203
Batten/ angle holder
53
2173
41
Ceiling rose 3 pin 5 amp
53
1908
36
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
3
20262
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
24
1824
76
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
15
22545
1503
Supplying, installation, testing and commissioning of
following T-5 fluorescent fitting (luminaries) complete with
electronic ballast but without fluorescent lamp, on ceiling/
wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
50
31750
635
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
50
2550
51
Providing and fixing composite unit for computer points
having modular type 1 No 6 pin 16 amp socket outlet, 1
No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3
Nos 6 amp switches, suitable G.I. box, base and cover
plates, earthing the sockets and switch box including etc.
as required.
18
15822
879
Supplying, installation, testing and commissioning of
following 230/250 volts LED street light fitting with all
accessories like driver, heat sink made of die cast
aluminium with IP 66 protection and 5 KV surge
protection on pole bracket complete as required and
furnishing 2 Yrs Guarantee certificate from manufacturer. 40-45 watt
12
114408
9534
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator) 8 way, Single door
4
2944
736
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade on
surface/ existing cable tray with 1 mm thick GI saddle as
required. 3 x 10 sq. mm
250
32000
128
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
50.72
9383
185
Providing and laying nominal mixed cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth & at ground level excluding cost of form work. 1:5:10 (1 cement : 5 course sand : 10 graded stone aggregate 40 mm. Nominal size)
4.54
10936
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
11.21
29807
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
19.94
65064
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
30.61
103584
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.63
2669
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2416.99
131725
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
11.4
47458
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
17.98
76603
4260.5
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
0.76
356
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
39.06
5429
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
70.86
21045
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
32.71
6607
202
(D) weather shade chhajja cornies and moulding.
12.98
3816
294
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
76.9
18071
235
(F) Edge of slab breaks in floorand wall up to 200mm
47.2
1604
34
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
50.72
3296
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
31.33
11623
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
135.42
9953
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
205.63
13880
67.5
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2mm and braced with flat iron diagonals 20x5mm size
with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys
complete with bolts, nuts, locking arrangement stoppers, handles
including applying a priming coat of red oxide zinc chromate primer.
3.84
12787
3330
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
30.32
10035
331
Extra for powder coated (minimum 50 micron) aluminium sections instead
of anodized.
31.08
10505
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm thickness
12.01
9656
804
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.(a) 50mm thick
45.54
11567
254
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.
(a) 40 mm. wide
26.4
475
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.
(A) Size 300x300mm
11
7612
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.
(A) Size up to 200x300mm
26.16
15355
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
64.02
73687
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
6.43
11779
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
6
846
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
3
133
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
6
345
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
3
141
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
4.84
11611
2399
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
223.07
20410
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
130.18
13929
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
112.48
9785
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
69.9
587
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
14.99
494
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
302.58
28593
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
302.58
13464
44.5
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
137.74
3168
23
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
138.91
5695
41
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
46.43
2600
56
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
3
4320
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
3
3609
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
2
1744
872
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
5
1195
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
6
411
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
20
5340
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
5
770
154
(B) "P" trap 110mmx110mm long
3
681
227
(e) Nahani trap
8
724
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
20
5160
258
15 mm dia. nominal bore
1
149
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
10
1880
188
20 mm dia nominal bore
6
1326
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
8
408
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
10
2370
237
Stop cock (600 grams)
8
1896
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7300
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
61.06
11296
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
23.77
63204
2659
Providing and laying precast cement concrete block in masonry work with
precast blocks having crushing strength 75 kg/sqcm in cement mortar
1:6(1 Cement :6 coarse sand ) .(To be used in boundary wall and plaster
shall not be done.)
20.59
96361
4680
Extra for brick work In S/S above plinth & up to floor five level.
43.29
146493
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
1.16
4914
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thermo-Mechanically treated bars FE 415
3616.96
167971
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
15.7
65359
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
22.58
96202
4260.5
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level. Foundations, footing, base of columns and plinth beam in any shape and size
79.04
10986
139
Columns-rectangular or square in shape.Up to 4m height
74.85
22230
297
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
56.32
11376
202
weather shade chhajja cornies and moulding.
19.75
5806
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
93.08
21873
235
Edge of slab breaks in floorand wall up to 200mm
71.2
2420
34
(C) Window sill,anchore string course bend coping bed plate and like (i) Up to 4.00 M. height from P.L.
8.15
1499
184
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
9.78
2249
230
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
59.31
3855
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
106.2
39400
371
25mm thick Local RAJIM/ Red Flag stone slab in riser of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:4 (1 cement : 4 coarse sand)
and joint with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
11.12
6616
595
Providing and fixing M.S. frames of doors, windows, ventilators and
cupboards joints mitred and welded with 15x3 mm lugs 10cm long
embedded in cement concrete blocks 15x10x10cm of grade M-10 or with
wooden plugs and screws or with dash fastener or rawl plugs and screws
or with fixing clips or with bolts and nuts as required including fixing of
necessary butt hinges and screws and applying a priming coat of
approved steel primer. Angle-iron frames
158.96
11683
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or
square or round bars welded to steel frame of windows etc. including
applying a priming coat welded to frame with all necessary fitting complete
including applying a priming of red oxide zinc chromate primer.
177.35
11971
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
26.99
8933
331
Extra for powder coated (minimum 50 micron) aluminium sections instead
of anodized.
27.3
9227
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm thickness
11.02
7802
708
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
71.84
18247
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
88.4
1591
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
8.4
5812
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
36.96
21695
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
88.9
102323
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
14.25
26106
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod,
2.5mm thick flap, necessary stainless steel nuts bolts and screws etc
complete. 250mm
7
1596
228
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
7
493
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
14
343
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
7
329
47
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
7
595
85
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
21
2583
123
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.36
8060
2399
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
281.73
25778
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
305.34
32671
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
196.44
17090
87
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
27.54
908
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
321.32
30364
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
321.32
12210
38
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
296.98
6830
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
255.54
14310
56
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
3.08
1176
382
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
2
8341
4170.5
Painting on new work (Two or more coats) to give an even shade with: Satin synthetic enamel paint
10.7
599
56
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
34
1870
55
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
56.11
10380
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
12.15
32306
2659
Providing and laying precast cement concrete block in masonry work with
precast blocks having crushing strength 75 kg/sqcm in cement mortar
1:6(1 Cement :6 coarse sand ) .(To be used in boundary wall and plaster
shall not be done.)
21.54
100807
4680
Extra for brick work in superstructure above plinth level for every floor or
part thereof in addition to rate for foundation and plinth:
26.27
126122
4801
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.39
1652
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2183.84
119019
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
7.75
32263
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
12.45
53043
4260.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
44.53
6189
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
55.68
16536
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
18.64
3765
202
(D) weather shade chhajja cornies and moulding.
6.77
1990
294
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
52
12220
235
(F) Edge of slab breaks in floorand wall up to 200mm
51.95
1766
34
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
9.46
2175
230
(C) Window sill,anchore string course bend coping bed plate and like (i) Up to 4.00 M. height from P.L.
7.46
1372
184
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
41.71
2711
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
51.1
18958
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
91.95
6758
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
207.12
13980
67.5
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
1.44
770
535
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
21.16
5374
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
44.4
799
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
3.68
2546
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
18.01
10571
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
36.64
42172
1151
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
1.38
712
516
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
10.4
19052
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
4
912
228
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
4
282
70.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and
plinth:
0.63
2627
4170.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
8
196
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.68
4030
2399
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1: 1:5: 3 (1 cement : 1:3 coarse sand : 3 graded stone aggregate 40mm
nominal size).
1.59
5647
3552
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
210.58
19268
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
259.17
27731
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
79.14
6885
87
Extra for lining over plaster to imitate stone or concrete block walling.
30.62
719
23.5
Neat cement punning.
42.03
1386
33
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
193.47
7351
38
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
181.16
4166
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
175.51
9828
56
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
16
5296
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
22
7436
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness
6.38
4517
708
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks)
confirming to IS:12894-2002 of class designation 4.0 in superstructure
above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand)
3.08
1176
382
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
181.16
17119
94.5
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
18.67
1026
55
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
9.91
579
58.5
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
4
340
85
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
12
1476
123
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
51.06
9446
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
12.08
32120
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
21.67
70709
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
18.17
61487
3384
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
1936.87
105559
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
11.51
47916
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
6.1
25989
4260.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
36.38
5056
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
38.4
11404
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
11.08
2238
202
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
26.6
6251
235
(F) Edge of slab breaks in floorand wall up to 200mm
30.4
1033
34
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
3.13
575
184
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
51.06
3318
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
39.79
14762
371
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
58.87
14952
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
27.6
496
18
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
381.85
35702
93.5
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
3.36
6155
1832
Sliding Bolt
2
456
228
Providing and fixing stainless steel tower bolts (Barrel type) with
necessary stainless steel screws etc complete. 200 x10mm
2
141
70.5
Providing and fixing stainless steel door handles having flap thickness
2.5mm, necessary stainless steel screws etc complete. 150 mm
4
98
24.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm
thick flap, necessary stainless steel screws etc complete. 250mm
2
170
85
Providing and fixing stainless steel piano hinges with necessary stainless
steel screws etc complete. Overall width 25 mm
6
738
123
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
39.11
2639
67.5
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
38.1
13220
347
Neat cement punning.
22.74
750
33
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
131.91
12069
91.5
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
22.72
1976
87
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
214.97
23001
107
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
122.58
2819
23
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
113.97
10770
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
321.32
12210
38
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
357.21
20003
56
Painting on new work (two or more coats) to give an even shade with: (a) Aluminium Paint
28.76
1682
58.5
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
538.27
99579
185
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
45
119655
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
16539.6
901408
54.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
547.6
76116
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
596.96
177297
297
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
195
35880
184
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
173.97
724237
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
38.94
165903
4260.5
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
27.6
90058
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
230.46
779876
3384
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1950
208650
107
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
1350
99225
73.5
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
20.61
1793
87
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1800
164700
91.5
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
538.27
34987
65
Extra for lining over plaster to imitate stone or concrete block walling.
770.4
18104
23.5
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
5250
49350
9.4
Providing and fixing concertina coil fencing with required dia 610 mm
(having 50 nos. round per 6 metre length) up to 3m height of wall with
existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I.
staples and G.I. clips to retain horizontal including necessary bolts or G.I.
barbed wire tied to angle iron all complete as per direction of Engineer-incharge
with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick)
wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick)
and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid
separately)
750
123000
164
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
3337.82
186917
56
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt hinges, all necessary fitting and finished by filling putty including applying a priming coat of red oxide zinc chromate primer all complete. (To be used in safety door shutters in buildings)
541
50583
93.5
Excavation for Structures (Earth work in excavation of foundation
of structures as per drawing and technical specification, including
setting out, construction of shoring and bracing, removal of stumps
and other deleterious matter, dressing of sides and bottom and
backfilling with approved material.) Ordinary soil Up to 3 m depth
37.26
5439
146
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire,
placing in position , providing shuttering and concreting by using
concrete mixer, compaction by vibration etc complete as per
drawings and technical specifications.
250
648000
2592
Compacting Original Ground supporting embankment
Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
1154.7
32331
28
Construction of sub-grade with Material Obtained from
Borrow Pits/Borrow Area (Construction of sub-grade with
approved material/selected soil having C.B.R.8 (unless specified
otherwise in the contract) obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2)
2790
697500
250
Plain cement concrete complete as per drawing and Technical. PCC Grade M 15
7.16
26978
3768
PCC Grade M 20
26.14
109108
4174
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts including fixing collar with cement mortar 1:2 but excluding bedding below pipes, excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . )450mm dia
40
70760
1769
600 mm dia
12.5
30737
2459
Granular Sub-base as per Table:- 400-1
Construction o granular sub base by providing close graded Mareial, , Carriage of mixed Material to work site spreading in uniform layers with motor grader on on perpared surface watering , rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401(part-II) and suitably sprinkling arrangement as per clause 401 but excluding scarifying existing bituminous surface.(A) By Mix in Place method. Disintegrated rock i.e moorum having CBB value not less than 20 and P.I. and L.L. not more than 6 and 20 respectively .
2324.4
1069224
460
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
1535.71
2202208
1434
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
642.1
1497377
2332
Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base, coarse and fine aggregate conforming to IS:383, and graded as per table 600-3, mixed as per approved mix design at site, laid, spread, vibrated, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, de-bonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per clause 602.)
(a) With Cement concrete grade M-40 and minimum cement content @ 400 kg/cum.
1695.94
7984485
4708
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements