State Warehousing Corporation Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
State Warehousing Corporation - CGSWC Tender
Civil And Construction
Civil Works Others
Opening Date1 Jan 2021
Closing Date22 Jan 2021
Tender AmountRefer Documents
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
70410Bid Award Id
ViewTender No
70410Tender Authority
State Warehousing Corporation ViewPurchaser Address
-Website
http://http://cgswc.cg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
nominal size).
477.81
1270496
2659
Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete M-35
grade, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite
solution and the length of the pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be measured upto to the
bottom of pile cap):300 mm dia piles.
297
446985
1505
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415
57780.37
2985529
54.5
Providing and laying design mix reinforced cement concrete with crushed
graded stone aggregate 20mm nominal size using batching plant, transit
mixer and concrete pump, in all works upto plinth level excluding cost of
form work. M-20 Grade
461.44
1952352
4231
Extra for laying PCC/RCC of any grade in superstructure above plinth
level for every floor or part thereof in addition to rate for foundation and
plinth: + M-20 Grade upto 4.00 m Above
95.47
413241
4328.5
Above 4.00 upto 8.00 m Above
48.83
216121
4426
Above 8.00 upto 12.00 m Above
0.6
2714
4523.5
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level.
1148.97
159706
139
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
27.04
4975
184
Above 6.00 M. to 7.00 M.
2.7
715
265
Above 7.00 M. to 8.00 M.
4.22
1287
305
Above 8.00 M. to 9.00 M.
4.22
1460
346
Above 9.00 M. to 10.00 M.
4.54
1752
386
Beams, lintel, cantilevers & walls.
46.85
9463
202
Spiral / folded plate type stair cases including risers and landings
17.73
5443
307
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
121.31
28507
235
Edge of slab breaks in floorand wall up to 200mm
82.08
2790
34
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
236.75
47823
202
Above 5.00 M. to6.00 m
127.69
36136
283
Columns-rectangular or square in shape.
(i) Up to 4m height
1587.65
471532
297
Above 4.00 M. to 5.00 M.
131.52
44388
337.5
Above 5.00 M. to 6.00 M.
91.61
34628
378
Above 6.00 M. to 7.00 M.
27.48
11486
418
Above 7.00 M. to 8.00 M.
14.24
6536
459
Above 8.00 M. to 9.00 M.
4.2
2097
499.5
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
247.58
807853
3263
Extra for brick work In S/S above plinth & up to floor five level.
374.43
1267071
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
226.81
794969
3505
Extra for brick work In S/S above 8.00 m & upto 12.00 M
85.19
308898
3626
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
5.4
22879
4237
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
6093.51
2260692
371
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
671.66
170601
254
75mm thick
2654.91
915943
345
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.60 mm. Wide
3982.37
99559
25
40 mm. wide
1343.32
24179
18
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
66.96
3197
47.75
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
71.84
38434
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
85.64
144817
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
85.64
144817
1691
Providing and fixing 27.5cm. long wire spring for rolling shutters.
72
26064
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
96.39
38459
399
Providing andfixing ball bearing for rolling shutters.
72
30456
423
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1795.51
144538
80.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1233.89
83287
67.5
Providing and fixing GI wire gauge of average width of aperture 1.56mm
with wire of 0.45mm to existing steel door, window shutter frames with
necessary M.S. strip beading etc. complete.
61.07
34748
569
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
531.35
39319
74
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm
M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.
203.75
14568
71.5
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4352.22
406932
93.5
Above 5.00 M. height.
33060.4
3180410
96.2
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
3447.27
1196202
347
Providing corrugated G.I. sheet roofing including vertical / curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8 mm. diameter with bitumen and G.I. Limpet washers or with G.I. limpet washers filled with white lead including painting with primer & paint on overlapping of complete excluding the cost of purlins rafters and tursses. (Zinc coating not less 272.00 gms. / Sqm.) 0.80 mm thick sheet (weight 7.03 kg/m2)
129.54
104927
810
Providing and fixing 3mm thick corrugated fibre glass sheet roofing in any shade/ colour fixed with galvanized iron J hooks, bolts and nuts, 8 mm diameter with bitumen G.I. limpect washers etc. complete but excluding cost of purlin, rafter and trusses etc. with :- 3 mm. thick fibre glass sheet
75.6
66452
879
Providing ridges or hips 60 cm. over all width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8 mm G.I. limpet and bitumen washers complete. 0.63mm thick sheet with Zinc coating not less 275.00 gms. / Sqm.
125.55
55869
445
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
2045.85
241410
118
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5038.77
461047
91.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
9.89
40281
4073
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
150.87
16143
107
Applying priming coat on steel work with red oxide zinc chromate primer.
415.62
7273
17.5
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
2352.37
129380
55
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
819.5
71296
87
Providing and making moulded mortar band in cement mortar 1:4 (1
cement : 4 fine sand) per cm width: 18 mm thick
73.66
412
5.6
Extra for lining over plaster to imitate stone or concrete block walling
537.62
8655
16.1
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.Size up to 200x300mm
39.73
23321
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
9.81
6788
692
Providing and laying vitrified floor tiles with soluble salt printing, of size
600x600mm with water absorption less than 0.5% and conforming to IS
: 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints with white cement
and matching pigments etc. complete.
69.81
67227
963
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
1671.27
38439
23
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
425.14
40175
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
425.14
16155
38
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
2865.08
65896
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2865.08
160444
56
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
149.64
49530
331
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
13.65
10974
804
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
9000
64800
7.2
Providing and fixing factory made P.V.C. door frame of size 50x47mm
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet mitred at corners and joined with 2 Nos of 150mm long brackets of
15x15mm M.S. square tube, the vertical door profiles to be reinforced with
19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather
seal to be provided through out the frame. The door frame to be fixed to
the wall using M.S. screws of 65/100mm size complete as per
manufacturers specification and direction of Engineer-in-Charge.
10.5
3633
346
Providing and fixing 30mm thick factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness and
size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S.
frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C'
channel of size 30mm thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 45degree angle on either side forming
styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom
and lock rails shall be provided either side of the panel. 10mm (5mm x 2 )
thick, 20mm wide cross PVC sheet be provided as gap insert for top rail &
bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the
M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm)
thick x 15mm wide PVC sheet beading on inner side, and joined together
with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per Manufacturer’s specification..PVC door shutter
3.36
7788
2318
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
14
3304
236
Medium point
37
14356
388
Long point
24
13272
553
Extra for providing and fixing light plug point on baard in concealed steel conduit point wiring with piano wiring with plano type 3pin 5Amp socket outlet and 5 Amp switdch i/c cost of phenolic laminated sheet and M.S. box etc. as required. 3 pin, 5 Amp. Socket outlet point on same board.
22
2090
95
Wiring for light plug point with 2x2.5 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 6amp switch and 3pin 6 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required. Short point
2
678
339
Medium point
4
2328
582
Long point
2
1738
869
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
1
501
501
Medium point
1
846
846
Long point
2
2518
1259
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
500
52000
104
6x2.5 sq. mm in 20 mm conduit.
110
18920
172
9x2.5 sq. mm in 20 mm conduit
30
7470
249
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
6
456
76
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
3
2793
931
Supply and fixing on surface/ recess prewired vertical type following way, 415 volt TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete. Complete with loos wirew box, terminal blocks, 200amps tinned copper busbar, commen neutral link, earth bar, din bar, Supplying and fixing on surface/ recess prewired vertical type following way, 415 volts TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete with loose wire box, terminal blocks, 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland plate, loose wire box, superior make terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as required. (But without MCB/ RCCB/ Isolator) (Note: Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Single door
1
10020
10020
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, testing and commissioning etc as required. (Connecting lead if required shall be paid separately) 100 Amp TP&N
1
3411
3411
63 Amp TP&N
3
4884
1628
32 Amp TP&N
2
2382
1191
Supplying and fixing on surface/ recess following way, 240volts, SPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way, Single door
3
1806
602
Supplying and fixing on surface/ recess following way, 240volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way, Double door
3
7992
2664
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
12
5136
428
Supplying and fixing TP MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB
DB complete with connections, testing and commissioning etc. as required. 6 amps to 32 amps
9
6264
696
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
Supplying and fixing following rating, 415 volts, FOUR POLES, ISOLATOR in the existing MCB DB complete
with connections, testing and commissioning etc. as required. 63 amps
3
1935
645
Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board i/c drilling holes on the board, screws, connections etc. as required. (Thimbeling shall be paid seperately). 100 amps.
4
1100
275
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 25 sq. mm.
30
9780
326
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 10 sq. mm.
80
22240
278
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 25 sq. mm. on 7 SWG GI bearer wire.
30
5520
184
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
80
10800
135
Supply and fixing metal clad busbar chamber made of 1.6mm. Thick CRCA sheet with 4 strip copper bushbar of following capacity and length, complete with all accessories, i/c earthing the body etc as required. 200 amp x 450 mm. Long
1
3531
3531
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
4
170
42.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep
5
387
77.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 100 mm X 100 mm X 60 mm deep
4
374
93.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 150 mm X 75 mm X 60 mm deep
20
1980
99
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 180 mm X 100 mm X 60 mm deep
9
1089
121
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 200 mm X 125 mm X 60 mm deep
4
896
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
4
6012
1503
Supplying, installation, testing and commissioning of following T-5 fluorescent fitting (luminaries) complete with electronic ballast but without fluorescent lamp, on ceiling/wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
34
9248
272
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 1x13/18 watt CFL with cover
2
1934
967
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 2x13/18 watt CFL with cover
8
9736
1217
Excavation for all types and sizes of foundations, trenches and drains or
for any other purpose including disposal of excavated stuff upto 1.5 m lift
and lead upto 50m (at least 5m away from the excavated area), including
dressing and leveling of pits.In all types of soils.
1898.35
351194
185
Carriage by mechanical transport upto 5 km lead: Earth
1898.35
210716
111
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
80.07
192888
2409
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
nominal size).
477.81
1270496
2659
Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete M-35
grade, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite
solution and the length of the pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be measured upto to the
bottom of pile cap):300 mm dia piles.
297
446985
1505
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415
57780.37
2985529
54.5
Providing and laying design mix reinforced cement concrete with crushed
graded stone aggregate 20mm nominal size using batching plant, transit
mixer and concrete pump, in all works upto plinth level excluding cost of
form work. M-20 Grade
461.44
1952352
4231
Extra for laying PCC/RCC of any grade in superstructure above plinth
level for every floor or part thereof in addition to rate for foundation and
plinth: + M-20 Grade upto 4.00 m Above
95.47
413241
4328.5
Above 4.00 upto 8.00 m Above
48.83
216121
4426
Above 8.00 upto 12.00 m Above
0.6
2714
4523.5
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level.
1148.97
159706
139
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
27.04
4975
184
Above 6.00 M. to 7.00 M.
2.7
715
265
Above 7.00 M. to 8.00 M.
4.22
1287
305
Above 8.00 M. to 9.00 M.
4.22
1460
346
Above 9.00 M. to 10.00 M.
4.54
1752
386
Beams, lintel, cantilevers & walls.
46.85
9463
202
Spiral / folded plate type stair cases including risers and landings
17.73
5443
307
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
121.31
28507
235
Edge of slab breaks in floorand wall up to 200mm
82.08
2790
34
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
236.75
47823
202
Above 5.00 M. to6.00 m
127.69
36136
283
Columns-rectangular or square in shape.
(i) Up to 4m height
1587.65
471532
297
Above 4.00 M. to 5.00 M.
131.52
44388
337.5
Above 5.00 M. to 6.00 M.
91.61
34628
378
Above 6.00 M. to 7.00 M.
27.48
11486
418
Above 7.00 M. to 8.00 M.
14.24
6536
459
Above 8.00 M. to 9.00 M.
4.2
2097
499.5
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
247.58
807853
3263
Extra for brick work In S/S above plinth & up to floor five level.
374.43
1267071
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
226.81
794969
3505
Extra for brick work In S/S above 8.00 m & upto 12.00 M
85.19
308898
3626
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
5.4
22879
4237
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
6093.51
2260692
371
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
671.66
170601
254
75mm thick
2654.91
915943
345
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.60 mm. Wide
3982.37
99559
25
40 mm. wide
1343.32
24179
18
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
66.96
3197
47.75
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
71.84
38434
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
85.64
144817
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
85.64
144817
1691
Providing and fixing 27.5cm. long wire spring for rolling shutters.
72
26064
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
96.39
38459
399
Providing andfixing ball bearing for rolling shutters.
72
30456
423
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1795.51
144538
80.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1233.89
83287
67.5
Providing and fixing GI wire gauge of average width of aperture 1.56mm
with wire of 0.45mm to existing steel door, window shutter frames with
necessary M.S. strip beading etc. complete.
61.07
34748
569
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
531.35
39319
74
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm
M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.
203.75
14568
71.5
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4352.22
406932
93.5
Above 5.00 M. height.
33060.4
3180410
96.2
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
3447.27
1196202
347
Providing corrugated G.I. sheet roofing including vertical / curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8 mm. diameter with bitumen and G.I. Limpet washers or with G.I. limpet washers filled with white lead including painting with primer & paint on overlapping of complete excluding the cost of purlins rafters and tursses. (Zinc coating not less 272.00 gms. / Sqm.) 0.80 mm thick sheet (weight 7.03 kg/m2)
129.54
104927
810
Providing and fixing 3mm thick corrugated fibre glass sheet roofing in any shade/ colour fixed with galvanized iron J hooks, bolts and nuts, 8 mm diameter with bitumen G.I. limpect washers etc. complete but excluding cost of purlin, rafter and trusses etc. with :- 3 mm. thick fibre glass sheet
75.6
66452
879
Providing ridges or hips 60 cm. over all width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8 mm G.I. limpet and bitumen washers complete. 0.63mm thick sheet with Zinc coating not less 275.00 gms. / Sqm.
125.55
55869
445
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
2045.85
241410
118
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5038.77
461047
91.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
9.89
40281
4073
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
150.87
16143
107
Applying priming coat on steel work with red oxide zinc chromate primer.
415.62
7273
17.5
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
2352.37
129380
55
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
819.5
71296
87
Providing and making moulded mortar band in cement mortar 1:4 (1
cement : 4 fine sand) per cm width: 18 mm thick
73.66
412
5.6
Extra for lining over plaster to imitate stone or concrete block walling
537.62
8655
16.1
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.Size up to 200x300mm
39.73
23321
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
9.81
6788
692
Providing and laying vitrified floor tiles with soluble salt printing, of size
600x600mm with water absorption less than 0.5% and conforming to IS
: 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints with white cement
and matching pigments etc. complete.
69.81
67227
963
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
1671.27
38439
23
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
425.14
40175
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
425.14
16155
38
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
2865.08
65896
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2865.08
160444
56
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
149.64
49530
331
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
13.65
10974
804
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
9000
64800
7.2
Providing and fixing factory made P.V.C. door frame of size 50x47mm
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet mitred at corners and joined with 2 Nos of 150mm long brackets of
15x15mm M.S. square tube, the vertical door profiles to be reinforced with
19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather
seal to be provided through out the frame. The door frame to be fixed to
the wall using M.S. screws of 65/100mm size complete as per
manufacturers specification and direction of Engineer-in-Charge.
10.5
3633
346
Providing and fixing 30mm thick factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness and
size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S.
frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C'
channel of size 30mm thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 45degree angle on either side forming
styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom
and lock rails shall be provided either side of the panel. 10mm (5mm x 2 )
thick, 20mm wide cross PVC sheet be provided as gap insert for top rail &
bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the
M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm)
thick x 15mm wide PVC sheet beading on inner side, and joined together
with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per Manufacturer’s specification..PVC door shutter
3.36
7788
2318
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
14
3304
236
Medium point
37
14356
388
Long point
24
13272
553
Extra for providing and fixing light plug point on baard in concealed steel conduit point wiring with piano wiring with plano type 3pin 5Amp socket outlet and 5 Amp switdch i/c cost of phenolic laminated sheet and M.S. box etc. as required. 3 pin, 5 Amp. Socket outlet point on same board.
22
2090
95
Wiring for light plug point with 2x2.5 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 6amp switch and 3pin 6 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required. Short point
2
678
339
Medium point
4
2328
582
Long point
2
1738
869
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
1
501
501
Medium point
1
846
846
Long point
2
2518
1259
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
500
52000
104
6x2.5 sq. mm in 20 mm conduit.
110
18920
172
9x2.5 sq. mm in 20 mm conduit
30
7470
249
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
6
456
76
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
3
2793
931
Supply and fixing on surface/ recess prewired vertical type following way, 415 volt TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete. Complete with loos wirew box, terminal blocks, 200amps tinned copper busbar, commen neutral link, earth bar, din bar, Supplying and fixing on surface/ recess prewired vertical type following way, 415 volts TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete with loose wire box, terminal blocks, 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland plate, loose wire box, superior make terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as required. (But without MCB/ RCCB/ Isolator) (Note: Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Single door
1
10020
10020
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, testing and commissioning etc as required. (Connecting lead if required shall be paid separately) 100 Amp TP&N
1
3411
3411
63 Amp TP&N
3
4884
1628
32 Amp TP&N
2
2382
1191
Supplying and fixing on surface/ recess following way, 240volts, SPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way, Single door
3
1806
602
Supplying and fixing on surface/ recess following way, 240volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way, Double door
3
7992
2664
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
12
5136
428
Supplying and fixing TP MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB
DB complete with connections, testing and commissioning etc. as required. 6 amps to 32 amps
9
6264
696
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
Supplying and fixing following rating, 415 volts, FOUR POLES, ISOLATOR in the existing MCB DB complete
with connections, testing and commissioning etc. as required. 63 amps
3
1935
645
Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board i/c drilling holes on the board, screws, connections etc. as required. (Thimbeling shall be paid seperately). 100 amps.
4
1100
275
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 25 sq. mm.
30
9780
326
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 10 sq. mm.
80
22240
278
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 25 sq. mm. on 7 SWG GI bearer wire.
30
5520
184
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
80
10800
135
Supply and fixing metal clad busbar chamber made of 1.6mm. Thick CRCA sheet with 4 strip copper bushbar of following capacity and length, complete with all accessories, i/c earthing the body etc as required. 200 amp x 450 mm. Long
1
3531
3531
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
4
170
42.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep
5
387
77.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 100 mm X 100 mm X 60 mm deep
4
374
93.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 150 mm X 75 mm X 60 mm deep
20
1980
99
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 180 mm X 100 mm X 60 mm deep
9
1089
121
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 200 mm X 125 mm X 60 mm deep
4
896
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
4
6012
1503
Supplying, installation, testing and commissioning of following T-5 fluorescent fitting (luminaries) complete with electronic ballast but without fluorescent lamp, on ceiling/wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
34
9248
272
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 1x13/18 watt CFL with cover
2
1934
967
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 2x13/18 watt CFL with cover
8
9736
1217
Excavation for all types and sizes of foundations, trenches and drains or
for any other purpose including disposal of excavated stuff upto 1.5 m lift
and lead upto 50m (at least 5m away from the excavated area), including
dressing and leveling of pits.In all types of soils.
1898.35
351194
185
Carriage by mechanical transport upto 5 km lead: Earth
1898.35
210716
111
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
80.07
192888
2409
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
nominal size).
477.81
1270496
2659
Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete M-35
grade, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite
solution and the length of the pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be measured upto to the
bottom of pile cap):300 mm dia piles.
297
446985
1505
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415
57780.37
2985529
54.5
Providing and laying design mix reinforced cement concrete with crushed
graded stone aggregate 20mm nominal size using batching plant, transit
mixer and concrete pump, in all works upto plinth level excluding cost of
form work. M-20 Grade
461.44
1952352
4231
Extra for laying PCC/RCC of any grade in superstructure above plinth
level for every floor or part thereof in addition to rate for foundation and
plinth: + M-20 Grade upto 4.00 m Above
95.47
413241
4328.5
Above 4.00 upto 8.00 m Above
48.83
216121
4426
Above 8.00 upto 12.00 m Above
0.6
2714
4523.5
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level.
1148.97
159706
139
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
27.04
4975
184
Above 6.00 M. to 7.00 M.
2.7
715
265
Above 7.00 M. to 8.00 M.
4.22
1287
305
Above 8.00 M. to 9.00 M.
4.22
1460
346
Above 9.00 M. to 10.00 M.
4.54
1752
386
Beams, lintel, cantilevers & walls.
46.85
9463
202
Spiral / folded plate type stair cases including risers and landings
17.73
5443
307
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
121.31
28507
235
Edge of slab breaks in floorand wall up to 200mm
82.08
2790
34
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
236.75
47823
202
Above 5.00 M. to6.00 m
127.69
36136
283
Columns-rectangular or square in shape.
(i) Up to 4m height
1587.65
471532
297
Above 4.00 M. to 5.00 M.
131.52
44388
337.5
Above 5.00 M. to 6.00 M.
91.61
34628
378
Above 6.00 M. to 7.00 M.
27.48
11486
418
Above 7.00 M. to 8.00 M.
14.24
6536
459
Above 8.00 M. to 9.00 M.
4.2
2097
499.5
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
247.58
807853
3263
Extra for brick work In S/S above plinth & up to floor five level.
374.43
1267071
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
226.81
794969
3505
Extra for brick work In S/S above 8.00 m & upto 12.00 M
85.19
308898
3626
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
5.4
22879
4237
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
6093.51
2260692
371
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
671.66
170601
254
75mm thick
2654.91
915943
345
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.60 mm. Wide
3982.37
99559
25
40 mm. wide
1343.32
24179
18
Providing 10cm. x 7.60 cm. drip course with specially moulded burnt
bricks of crushing strength not less than 35 kg/sqcm and water absorption
not more than 20% at junction of roof and walls in cement mortar 1:4 (1
cement 4 fine sand)
66.96
3197
47.75
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
71.84
38434
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
85.64
144817
1691
Extra for providing grilled rolling shutter manufactured out of 8 mm dia.
M.S. bar instead of laths as per approved design (area of grill provided,
only to be measured).
85.64
144817
1691
Providing and fixing 27.5cm. long wire spring for rolling shutters.
72
26064
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
96.39
38459
399
Providing andfixing ball bearing for rolling shutters.
72
30456
423
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
1795.51
144538
80.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1233.89
83287
67.5
Providing and fixing GI wire gauge of average width of aperture 1.56mm
with wire of 0.45mm to existing steel door, window shutter frames with
necessary M.S. strip beading etc. complete.
61.07
34748
569
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
531.35
39319
74
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm
M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.
203.75
14568
71.5
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
4352.22
406932
93.5
Above 5.00 M. height.
33060.4
3180410
96.2
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
3447.27
1196202
347
Providing corrugated G.I. sheet roofing including vertical / curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8 mm. diameter with bitumen and G.I. Limpet washers or with G.I. limpet washers filled with white lead including painting with primer & paint on overlapping of complete excluding the cost of purlins rafters and tursses. (Zinc coating not less 272.00 gms. / Sqm.) 0.80 mm thick sheet (weight 7.03 kg/m2)
129.54
104927
810
Providing and fixing 3mm thick corrugated fibre glass sheet roofing in any shade/ colour fixed with galvanized iron J hooks, bolts and nuts, 8 mm diameter with bitumen G.I. limpect washers etc. complete but excluding cost of purlin, rafter and trusses etc. with :- 3 mm. thick fibre glass sheet
75.6
66452
879
Providing ridges or hips 60 cm. over all width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8 mm G.I. limpet and bitumen washers complete. 0.63mm thick sheet with Zinc coating not less 275.00 gms. / Sqm.
125.55
55869
445
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
2045.85
241410
118
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
5038.77
461047
91.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
9.89
40281
4073
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
150.87
16143
107
Applying priming coat on steel work with red oxide zinc chromate primer.
415.62
7273
17.5
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
2352.37
129380
55
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
819.5
71296
87
Providing and making moulded mortar band in cement mortar 1:4 (1
cement : 4 fine sand) per cm width: 18 mm thick
73.66
412
5.6
Extra for lining over plaster to imitate stone or concrete block walling
537.62
8655
16.1
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.Size up to 200x300mm
39.73
23321
587
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
9.81
6788
692
Providing and laying vitrified floor tiles with soluble salt printing, of size
600x600mm with water absorption less than 0.5% and conforming to IS
: 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1
cement : 4 coarse sand) including grouting the joints with white cement
and matching pigments etc. complete.
69.81
67227
963
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
1671.27
38439
23
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
425.14
40175
94.5
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
425.14
16155
38
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
2865.08
65896
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2865.08
160444
56
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
149.64
49530
331
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
13.65
10974
804
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
9000
64800
7.2
Providing and fixing factory made P.V.C. door frame of size 50x47mm
with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet mitred at corners and joined with 2 Nos of 150mm long brackets of
15x15mm M.S. square tube, the vertical door profiles to be reinforced with
19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather
seal to be provided through out the frame. The door frame to be fixed to
the wall using M.S. screws of 65/100mm size complete as per
manufacturers specification and direction of Engineer-in-Charge.
10.5
3633
346
Providing and fixing 30mm thick factory made panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness and
size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S.
frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C'
channel of size 30mm thickness, 70mm width out of which 50mm shall be
flat and 20mm shall be tapered in 45degree angle on either side forming
styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered in 45 degree on the inner side to form top
and bottom rail and 115mm wide PVC sheet out of which 75mm shall be
flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom
and lock rails shall be provided either side of the panel. 10mm (5mm x 2 )
thick, 20mm wide cross PVC sheet be provided as gap insert for top rail &
bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the
M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm)
thick x 15mm wide PVC sheet beading on inner side, and joined together
with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm
width is to be stuck on the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per Manufacturer’s specification..PVC door shutter
3.36
7788
2318
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
14
3304
236
Medium point
37
14356
388
Long point
24
13272
553
Extra for providing and fixing light plug point on baard in concealed steel conduit point wiring with piano wiring with plano type 3pin 5Amp socket outlet and 5 Amp switdch i/c cost of phenolic laminated sheet and M.S. box etc. as required. 3 pin, 5 Amp. Socket outlet point on same board.
22
2090
95
Wiring for light plug point with 2x2.5 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 6amp switch and 3pin 6 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required. Short point
2
678
339
Medium point
4
2328
582
Long point
2
1738
869
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
1
501
501
Medium point
1
846
846
Long point
2
2518
1259
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
500
52000
104
6x2.5 sq. mm in 20 mm conduit.
110
18920
172
9x2.5 sq. mm in 20 mm conduit
30
7470
249
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
6
456
76
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
3
2793
931
Supply and fixing on surface/ recess prewired vertical type following way, 415 volt TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete. Complete with loos wirew box, terminal blocks, 200amps tinned copper busbar, commen neutral link, earth bar, din bar, Supplying and fixing on surface/ recess prewired vertical type following way, 415 volts TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete with loose wire box, terminal blocks, 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland plate, loose wire box, superior make terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as required. (But without MCB/ RCCB/ Isolator) (Note: Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Single door
1
10020
10020
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing cubicle panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, testing and commissioning etc as required. (Connecting lead if required shall be paid separately) 100 Amp TP&N
1
3411
3411
63 Amp TP&N
3
4884
1628
32 Amp TP&N
2
2382
1191
Supplying and fixing on surface/ recess following way, 240volts, SPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way, Single door
3
1806
602
Supplying and fixing on surface/ recess following way, 240volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way, Double door
3
7992
2664
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
12
5136
428
Supplying and fixing TP MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB
DB complete with connections, testing and commissioning etc. as required. 6 amps to 32 amps
9
6264
696
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
4
1084
271
Supplying and fixing following rating, 415 volts, FOUR POLES, ISOLATOR in the existing MCB DB complete
with connections, testing and commissioning etc. as required. 63 amps
3
1935
645
Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board i/c drilling holes on the board, screws, connections etc. as required. (Thimbeling shall be paid seperately). 100 amps.
4
1100
275
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 25 sq. mm.
30
9780
326
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 10 sq. mm.
80
22240
278
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 25 sq. mm. on 7 SWG GI bearer wire.
30
5520
184
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
80
10800
135
Supply and fixing metal clad busbar chamber made of 1.6mm. Thick CRCA sheet with 4 strip copper bushbar of following capacity and length, complete with all accessories, i/c earthing the body etc as required. 200 amp x 450 mm. Long
1
3531
3531
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
4
170
42.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep
5
387
77.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 100 mm X 100 mm X 60 mm deep
4
374
93.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 150 mm X 75 mm X 60 mm deep
20
1980
99
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 180 mm X 100 mm X 60 mm deep
9
1089
121
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 200 mm X 125 mm X 60 mm deep
4
896
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
4
6012
1503
Supplying, installation, testing and commissioning of following T-5 fluorescent fitting (luminaries) complete with electronic ballast but without fluorescent lamp, on ceiling/wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
34
9248
272
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 1x13/18 watt CFL with cover
2
1934
967
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 2x13/18 watt CFL with cover
8
9736
1217
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
1363
9813
7.2
Excavation for all types and sizes of foundations, trenches and drains or
for any other purpose including disposal of excavated stuff upto 1.5 m lift
and lead upto 50m (at least 5m away from the excavated area), including
dressing and leveling of pits.In all types of soils.
789.27
146014
185
Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete M-35
grade, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite
solution and the length of the pile to be embedded in pile cap etc. all
complete. (Length of pile for payment shall be measured upto to the
bottom of pile cap):300 mm dia piles.
89.1
134095
1505
Carriage by mechanical transport upto 5 km lead: Earth
789.27
87608
111
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm
nominal size).
43.48
104743
2409
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm
nominal size).
155.82
414325
2659
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete: Thermo-Mechanically treated bars FE 415
20914.24
1139826
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
182.54
759914
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
44.97
191594
4260.5
Above 4.00 M. to 8.00 M.
18.42
80274
4358
Above 4.00 M. to 8.00 M. hight above plinth
0.45
2004
4455.5
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level.
266.59
37056
139
Window sills, anchor blocks, string course, bends, copings, bed plates and
like.
4.18
769
184
Above 4.00 M. to 5.00 M.
9.01
2018
224
Above 6.00 M. to 7.00 M.
0.75
229
305.5
Above 7.00 M. to 8.00 M.
1.32
456
346
Above 8.00 M. to 9.00 M.
1.32
509
386
Above 9.00 M. to 10.00 M.
1.37
584
427
(D) weather shade chhajja cornies and moulding.
10.21
3001
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
71.81
16875
235
Edge of slab breaks in floorand wall up to 200mm
85.14
2894
34
Beams, lintel, cantilevers & walls.
75.7
15291
202
Above 5.00 M. to6.00 m
48.58
13748
283
Columns-rectangular or square in shape.
(i) Up to 4m height
499.68
148404
297
Above 4.00 M. to 5.00 M.
51.52
17388
337.5
Above 5.00 M. to 6.00 M.
24.68
9329
378
Above 6.00 M. to 7.00 M.
14.72
6152
418
Above 7.00 M. to 8.00 M.
8.1
3713
458.5
Above 8.00 M. to 9.00 M.
4.05
2022
499.5
Wall of any thickness including attached pilasters, buttresses etc.
326.95
74544
228
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
97.89
319415
3263
Extra for brick work In S/S above plinth & up to floor five level.
156.62
530002
3384
Extra for brick work In S/S above 4.00 m & upto 8.00 M
94.8
332274
3505
Extra for brick work In S/S above 8.00 m & upto 12.00 M
10.05
36441
3626
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
2.22
9406
4237
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
2202.26
817038
371
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
201.92
51287
254
75mm thick
883.26
304724
345
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.60 mm. Wide
1293.6
32340
25
40 mm. wide
247.05
4446
18
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
51.38
59138
1151
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
4.69
3245
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
13.65
8012
587
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
387.48
34098
88
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
444.9
30030
67.5
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings
complete including applying a priming coat of red oxide zinc chromate
primer.
687.21
54633
79.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately: For fixed portion
21.55
7133
331
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
21.52
7273
338
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading.With float glass panes of 6 mm thickness
12.04
9680
804
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators. 4 mm. Thick
15.06
8057
535
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft, with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80 x 1.25 mm. M.S. laths
26.79
45301
1691
Providing and fixing 27.5cm. long wire spring for rolling shutters.
12
4344
362
Providing and fixing M.S. sheet top cover for rolling shutter.0.90 mm. thick
12.14
4843
399
Providing andfixing ball bearing for rolling shutters.
12
5076
423
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.In Angle-iron frames
905.34
66542
73.5
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete. Aperture 50x25mm
48.96
27858
569
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
6.18
11321
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
2
282
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
1
44
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
3
172
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
3
141
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.61
3862
2399
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
1172.48
109626
93.5
Above 5.00 M. height.
11711.07
1126604
96.2
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
1112.67
386096
347
Providing corrugated G.I. sheet roofing including vertical / curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8 mm. diameter with bitumen and G.I. Limpet washers or with G.I. limpet washers filled with white lead including painting with primer & paint on overlapping of complete excluding the cost of purlins rafters and tursses. (Zinc coating not less 272.00 gms. / Sqm.) 0.80 mm thick sheet (weight 7.03 kg/m2)
41.48
33598
810
Providing ridges or hips 60 cm. over all width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8 mm G.I. limpet and bitumen washers complete. 0.63mm thick sheet with Zinc coating not less 275.00 gms. / Sqm.
52.31
23277
445
Providing and fixing 3mm thick corrugated fibre glass sheet roofing in any shade/ colour fixed with galvanized iron J hooks, bolts and nuts, 8 mm diameter with bitumen G.I. limpect washers etc. complete but excluding cost of purlin, rafter and trusses etc. with :- 3 mm. thick fibre glass sheet
25.2
22150
879
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
518.65
61200
118
Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1883.34
172325
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
97.17
10397
107
Providing and making 6mm thick cement plaster of mix:n Cement mortar 1:4 (1 cement : 4 fine sand)
211.03
18359
87
Extra for lining over plaster to imitate stone or concrete block walling.
149.29
3508
23.5
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm
nominal size).
2.78
11322
4073
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 stone aggregate 10mm and down grade) including finishing with
cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
45.03
3062
68
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
56.65
475
8.4
Neat cement punning.
48.68
1606
33
Applying priming coat on steel work with red oxide zinc chromate primer.
85.88
1502
17.5
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
660.75
36341
55
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
241.9
22859
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
241.9
10740
44.4
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
824.25
18957
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of
required shade as per manufacturer's specifications to give protective and
decorative finish including cleaning washing of surface etc. complete with On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1186.84
66463
56
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
11
2596
236
Medium point
17
6596
388
Long point
18
9954
553
Extra for providing and fixing light plug point on board in
concealed steel conduit point wiring with piano type 3 pin
5 amp socket outlet and 5 amp switch including cost of
phenolic laminated sheet and M.S. box etc. as
required.etc. as required.
15
1035
69
Wiring for light plug point with 2x2.5 sq mm FR PVC
insulated stranded copper conductor cable in concealed
PVC conduit along with piano type 6 amp switch and 3
pin 6 amps socket outlet with suitable size M.S. box,
phenolic laminated sheet, earthing the switch box and
socket outlet with same size cable etc. as required. Short point
2
544
272
Medium point
2
1002
501
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
2
792
396
Medium point
2
1418
709
Long point
2
2172
1086
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
200
18200
91
6x2.5 sq. mm in 20 mm conduit.
20
3040
152
9x2.5 sq. mm in 20 mm conduit
5
1105
221
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
5953
5953
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
15
1005
67
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
1
690
690
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
6
900
150
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
3
789
263
Supplying and laying following sizes one number PVC
insulated/ XLPE, PVC sheathed, steel armoured,
aluminium conductor power cable of 1.1 KV grade direct
in ground including excavation, sand cushioning,
protective covering and refilling the trench etc as
required. 4 x 10 sq. mm.
90
18450
205
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
90
18450
205
Supplying and fixing call bell/ buzzer suitable for single
phase, 230 volts A.C. supply, complete as required. Deluxe
2
282
141
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep
2
155
77.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 100 mm X 100 mm X 60 mm deep
4
374
93.5
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 150 mm X 75 mm X 60 mm deep
5
495
99
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 180 mm X 100 mm X 60 mm deep
9
1089
121
Supplying and fixing metal box of following sizes (nominal
size) in recess with suitable size phenolic laminated sheet
cover in front including painting etc as required. 200 mm X 125 mm X 60 mm deep
2
448
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
6
8844
1474
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and
commissioning as required. For 1x13/18 watt CFL with cover
23
15249
663
Supplying, installation, testing and commissioning of
following surface/ concealed type fluorescent fitting
(luminaries) complete with electronic ballast/ copper
ballast glow type starter but without fluorescent lamp, on
ceiling/ wall surface, earthing the fitting etc. as required. 4' x 40 W single patti type
23
759
33
supplying and fixing 3 pin 5 Amp ceilling rose on the exisiting junction box/wooden block i/c connection etc as required.
23
529
23
Supplying, fixing, testing and commissioning of following
230/250 volts fluorescent lamp (tube) in existing lighting
luminaries as required. 4' x 36/40 watt
23
1196
52
Supplying and fixing wooden board of suitable size for
energy meter etc complete as required.
2
170
85
Supplying, installation, testing and commissioning of
following CFL down lighter luminaries with mirror
reflector, but without CFL lamp, on surface/ recess in
false ceiling including connection, testing and commissioning as required. For 1x13/18 watt CFL with cover
6
3450
575
Supplying and fixing on surface/ recess following way,
240 volts SP&N MCB distribution board of sheet steel
phosphatized and powder painted complete with tinned
copper busbar, neutral busbar, earth bar, din bar,
detachable gland plate, including interconnections,
earthing etc. as required. (But without
MCB/RCCB/Isolator). 4 way, Single door
2
892
446
Supplying, fixing, testing and commissioning of following
CFL (Built in choke type) in existing lighting luminaries as
required. (b)20 Watt
6
1176
196
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
33.84
6260
185
In Hard rocks where blasting in prohibited
28.62
22838
798
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
26.54
70569
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
19.26
62845
3263
Extra for brick work In S/S above plinth & up to floor five level.
43.48
147136
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
1.16
4914
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thermo-Mechanically treated bars FE 415
3372.98
183827
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
16.35
68065
4163
Providing and laying mechanically mixed reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
18.87
80395
4260.5
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
0.87
408
469
Foundations, footings, bases of columns plinth beam, curtain wall in any
shape and size and all type of wall below plinth level. Foundations, footing, base of columns and plinth beam in any shape and size
49.7
6908
139
Columns-rectangular or square in shape.Up to 4m height
65.38
19417
297
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
45.49
9188
202
weather shade chhajja cornies and moulding.
10.89
3201
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
82.52
19392
235
Edge of slab breaks in floorand wall up to 200mm
54.91
1866
34
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
6.57
1511
230
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
62.46
4059
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
77.26
28663
371
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
2.76
1424
516
25mm thick Local RAJIM/ Red Flag stone slab in riser of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:4 (1 cement : 4 coarse sand)
and joint with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
11.12
6616
595
Providing and fixing M.S. frames of doors, windows, ventilators and
cupboards joints mitred and welded with 15x3 mm lugs 10cm long
embedded in cement concrete blocks 15x10x10cm of grade M-10 or with
wooden plugs and screws or with dash fastener or rawl plugs and screws
or with fixing clips or with bolts and nuts as required including fixing of
necessary butt hinges and screws and applying a priming coat of
approved steel primer. Angle-iron frames
158.96
11683
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or
square or round bars welded to steel frame of windows etc. including
applying a priming coat welded to frame with all necessary fitting complete
including applying a priming of red oxide zinc chromate primer.
462.78
31237
67.5
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
26.99
8933
331
Extra for powder coated (minimum 50 micron) aluminium sections instead
of anodized.
27.3
9227
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm thickness
11.02
8860
804
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
71.28
6272
88
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
2.72
1455
535
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
58.6
14884
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
64
1152
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
8.15
5639
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
37.15
21807
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
63.86
73502
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
10.4
19052
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
10
2380
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
4
564
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
2
89
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
8
460
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
10
225
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
5
235
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
3.23
7748
2399
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
281.73
25778
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
192.95
20645
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
132.73
11547
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
23.15
194
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
14.4
475
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
357.33
33767
94.5
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
357.33
8218
23
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
357.33
15901
44.5
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
255.54
19037
74.5
Painting on new work (Two or more coats) to give an even shade with: Satin synthetic enamel paint
66.49
3723
56
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
137
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
30.35
8103
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
14
2156
154
(B) "P" trap 110mmx110mm long
2
454
227
(e) Nahani trap
3
271
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
80
20640
258
15 mm dia. nominal bore
1
149
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
10
1880
188
20 mm dia nominal bore
5
1105
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
3
153
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
5
1185
237
Stop cock (600 grams)
1
237
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
3650
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Providing and constructing brick masonry chamber for underground pipe
and and bends with well burnt modular clay bricks crushing strength not
less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I.
cover with frame (light duty) 455x610 mm internal dimensions, total weight
of cover with frame to be not less than 38 kg (weight of cover 23 kg and
weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40
mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
1
3796
3796
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
8
1888
236
Medium point
10
3880
388
Long point
6
3318
553
Extra for providing and fixing light plug point on baard in concealed steel conduit point wiring with piano wiring with plano type 3pin 5Amp socket outlet and 5 Amp switdch i/c cost of phenolic laminated sheet and M.S. box etc. as required. 3 pin, 5 Amp. Socket outlet point on same board.
8
760
95
Wiring for light plug point with 2x2.5 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 6amp switch and 3pin 6 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required. Short point
2
678
339
Medium point
2
1164
582
Long point
1
869
869
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
1
501
501
Medium point
3
2538
846
Long point
1
1259
1259
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
30
3120
104
6x2.5 sq. mm in 20 mm conduit.
10
1720
172
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
7
532
76
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
1
931
931
Supplying and fixing on surface/ recess following way, 240volts, SPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way, Single door
1
602
602
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
6
2568
428
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
4 x 10 Sq.mm.
20
5560
278
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
20
2700
135
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
7
297
42.5
Supplying and fixing metal box of following sizes (nominal size) in recess with suitable size phenolic laminated sheet cover in front i/c painting etc as required.100 mm. x 100 mm. x 60 mm. deep
2
187
93.5
150 mm. x 75 mm. x 60 mm. deep
1
99
99
180 mm. x100 mm. x 60 mm. deep
1
121
121
200 mm. x 125 mm. x 60 mm. deep
5
1120
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
7
10521
1503
Supplying, installation, testing and commissioning of following T-5 fluorescent fitting (luminaries) complete with electronic ballast but without fluorescent lamp, on ceiling/wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
7
1904
272
Supplying, installation, testing and commissioning of following CFL down lighter luminaries wth mirror reflectore, but without CFL lamp, on surface / recess inb false ceiling i/c connection, testing and commissioning as required. For 1x13/18 watt CFL with cover
3
2901
967
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
50.72
9383
185
Providing and laying nominal mixed cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth & at ground level excluding cost of form work. 1:5:10 (1 cement : 5 course sand : 10 graded stone aggregate 40 mm. Nominal size)
4.54
10936
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
11.21
29807
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
19.94
65064
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
30.61
103584
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.63
2669
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
2416.99
131725
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
29.58
123141
4163
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
0.76
356
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
39.06
5429
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
70.86
21045
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
32.71
6607
202
(D) weather shade chhajja cornies and moulding.
12.98
3816
294
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
76.9
18071
235
(F) Edge of slab breaks in floorand wall up to 200mm
47.2
1604
34
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
50.72
3296
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
31.33
11623
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
135.42
9953
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
205.63
13880
67.5
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2mm and braced with flat iron diagonals 20x5mm size
with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys
complete with bolts, nuts, locking arrangement stoppers, handles
including applying a priming coat of red oxide zinc chromate primer.
3.84
12787
3330
Providing and fixing aluminium work for doors, windows, ventilators and
partitions made out of extruded aluminium standard sections (main
section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285
mitred and jointed mechanically including aluminium cleats, neoprene
weather stripping gasket beveled edge beading, screws duly fixed in wall/
floor with fixing clips or hold fasteners or bolts and nuts as required
aluminium sections shall be anodized transparent or dyed to approved
shade according to IS: 1868, minimum anodic coating shall be of grade
AC-15. (Glazing to be paid for separately:
For shutter of doors, windows & ventilators including providing and making
provision for fixing of fitting wherever required including the cost of PVC/
neoprene gasket required (Fittings shall be paid for separately).
30.32
10035
331
Extra for powder coated (minimum 50 micron) aluminium sections instead
of anodized.
31.08
10505
338
Providing and fixing glazing in aluminium door, window, ventilator shutters
and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of
aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm thickness
12.01
9656
804
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.(a) 50mm thick
45.54
11567
254
Extra for providing & fixing 4 mm. Thick glass strips in joints of Terrazzo floor/ cement concrete floor & or like.
(a) 40 mm. wide
26.4
475
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.
(A) Size 300x300mm
11
7612
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.
(A) Size up to 200x300mm
26.16
15355
587
Providing and laying vitrified floor tiles with double charge/ multi charge
printing with water absorption less than 0.5% and conforming to IS :
15622 of approved make in all colours and shades and size mentioned
below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4
coarse sand) including grouting the joints with white cement and
matching pigments etc. complete. Size 600x600mm
64.02
73687
1151
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
6.43
11779
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
6
846
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
3
133
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
6
345
57.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
3
141
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
4.84
11611
2399
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
223.07
20410
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
149.85
16033
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
112.48
9785
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
69.9
587
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
100
2350
23.5
Neat cement punning.
14.99
494
33
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
302.58
28593
94.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade. On new work (two or more coats)
302.58
13464
44.5
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
137.74
3168
23
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
138.91
7778
56
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
46.43
2600
56
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
3
4320
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
3
3609
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing white vitreous china urinal basin as per IS : 2556 complete: Flat back type urinal of size 460x380x250mm
2
1744
872
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
5
1195
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
6
411
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
20
5340
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
5
770
154
(B) "P" trap 110mmx110mm long
3
681
227
(e) Nahani trap
8
724
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
20
5160
258
15 mm dia. nominal bore
1
149
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
10
1880
188
20 mm dia nominal bore
6
1326
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
2
902
451
Providing and fixing stainless steel drain jali of approved make/quality.
8
408
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
10
2370
237
Stop cock (600 grams)
8
1896
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
7300
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
8
1888
236
Medium point
10
3880
388
Long point
6
3318
553
Extra for providing and fixing light plug point on baard in concealed steel conduit point wiring with piano wiring with plano type 3pin 5Amp socket outlet and 5 Amp switdch i/c cost of phenolic laminated sheet and M.S. box etc. as required. 3 pin, 5 Amp. Socket outlet point on same board.
8
760
95
Wiring for light plug point with 2x2.5 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 6amp switch and 3pin 6 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required. Short point
2
678
339
Medium point
2
1164
582
Long point
1
869
869
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
1
501
501
Medium point
3
2538
846
Long point
1
1259
1259
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
30
3120
104
6x2.5 sq. mm in 20 mm conduit.
10
1720
172
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
7
532
76
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
1
931
931
Supplying and fixing on surface/ recess following way, 240volts, SPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way, Single door
1
602
602
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
6
2568
428
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
4 x 10 Sq.mm.
20
5560
278
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
20
2700
135
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
7
297
42.5
Supplying and fixing metal box of following sizes (nominal size) in recess with suitable size phenolic laminated sheet cover in front i/c painting etc as required.100 mm. x 100 mm. x 60 mm. deep
2
187
93.5
150 mm. x 75 mm. x 60 mm. deep
1
99
99
180 mm. x100 mm. x 60 mm. deep
1
121
121
200 mm. x 125 mm. x 60 mm. deep
5
1120
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
7
10521
1503
Supplying, installation, testing and commissioning of following T-5 fluorescent fitting (luminaries) complete with electronic ballast but without fluorescent lamp, on ceiling/wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
7
1904
272
Supplying, installation, testing and commissioning of following CFL down lighter luminaries wth mirror reflectore, but without CFL lamp, on surface / recess inb false ceiling i/c connection, testing and commissioning as required. For 1x13/18 watt CFL with cover
3
2901
967
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
18.82
3481
185
In Hard rocks where blasting in prohibited
14.54
11602
798
Providing and laying nominal mixed cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth & at ground level excluding cost of form work. 1:5:10 (1 cement : 5 course sand : 10 graded stone aggregate 40 mm. Nominal size)
4.08
9828
2409
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
5.96
15847
2659
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 Cement : 6 Sand)
13.55
44213
3263
(B) Extra for brick work In S/S above plinth & up to floor five level.
21.24
71876
3384
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including formwork.
0.37
1567
4237
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete. a) Thrermo-mechanically
1911.39
104170
54.5
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. (a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
18.88
78597
4163
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
0.79
370
469
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-(A) Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
25.83
3590
139
(b) Columns-rectangular or square in shape.
(i) Up to 4m height
44.38
13180
297
(C) Beams, lintel, cantilevers & walls.(i) Up to 4.00 M. height from P.L.
16.22
3276
202
(D) weather shade chhajja cornies and moulding.
6.06
1781
294
(E) Suspended floor roof access plate form balconies (plain surface)and shelves (cast in situ)
46.72
10979
235
(F) Edge of slab breaks in floorand wall up to 200mm
35.45
1205
34
Stair cases of all types excluding spiral and folded plate type, including risers and landings.Up to 4.00 M. height from P.L.
6.4
1472
230
(C) Window sill,anchore string course bend coping bed plate and like (i) Up to 4.00 M. height from P.L.
4.84
890
184
(G) Stair cases of all types excluding spiral and folded plate type, including risers and landings
(a) Up to 4.00 M. height from P.L.
33.36
2168
65
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
15.07
5590
371
Providing and fixing M.S. frames of doors, windows and ventilators joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
(a) In Angle-iron frames
239.17
17579
73.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
347.97
23487
67.5
Providing and fixing factory made ISI marks steel doors, windows and
ventilators side/ top/ centre hung made up of standard rolled steel section
conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints
mitred and flash butt and sash bars tenoned and riveted/ welded with 10
cm long lugs of size 15x3mm embedded in cement concrete block
15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone
aggregate 20 mm nominal size) or rawl plugs and screws or with bolts
and nuts as required including providing and fixing of hinges, pivots,
handles, pegs, stays, rolling devices, locking arrangements, spring catch
etc., as required complete including applying a priming coat of red oxide
zinc chromate primer.
74.23
6532
88
Providing and fixing float glass panes with steel glazing clips and special
metal sash putty of approved make in steel doors, windows, ventilators: 4 mm. Thick
2.19
1171
535
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
62.1
15773
254
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
55.83
1004
18
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
3.22
2228
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size upto 200x300mm
16.17
9491
587
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm
(Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)
laid over & jointed with grey cement slurry mixed with pigments to
match the shade of the stone i/c grinding, rubbing and polishing.
1.38
712
516
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I),
decorative type core of block board construction with frame of first class
hard wood and well matched teak ply veneering with vertical grains or
cross bands and face veneers on both faces of shutters excluding hinges.30 mm. thick (single leaf)
12.71
23284
1832
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm
6
1428
238
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickle plated iron nuts bolts and screws etc complete. 250x16mm.
2
282
141
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickle plated iron screws etc complete. 100 x10mm
1
44
44.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 150 x10mm
8
460
57.5
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 100 x10mm
11
451
41
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm
6
135
22.5
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 100 mm
10
220
22
Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Single
4
188
47
Providing and fixing factory made PVC door shutters of specified
thickness made of styles and rails of a UPVC hollow section of specified
size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on
both sides. The styles and rails mitred and joined at the corners by means
of M.S. galvanised/ plastic brackets of size 75x220 mm having wall
thickness 1.0 mm and stainless steel screws.24 mm thick door shutters with styles and rails of size 59x24 mm
1.61
3862
2399
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1: 1:5: 3 (1 cement : 1:3 coarse sand : 3 graded stone aggregate 40mm
nominal size).
0.77
2735
3552
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
222
20313
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
135.42
14489
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
90.54
7876
87
Providing and making moulded mortar band in cement mortar 1:4 (1cement : 4 fine sand) per cm width: 12 mm thick
48.25
405
8.4
Extra for lining over plaster to imitate stone or concrete block walling.
10.06
236
23.5
Neat cement punning.
32.38
1068
33
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
192
7296
38
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
219.69
12302
56
Painting on new work (Two or more coats) to give an even shade with: Satin synthetic enamel paint
58.45
3214
55
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
`Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :White size 450x325 mm
1
1203
1203
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :345x445 mm bowl depth 200 mm.
1
6298
6298
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with C.P brass nuts collar and PVC bush of approved quality and colour: 45 CM length
1
239
239
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
2
137
68.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall
thickness conforming to IS : 13592 (4kg/sqcm) including required
couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm
gap for thermal expansion etc complete. 110 mm dia pipe.
22.35
5967
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
13
2002
154
(B) "P" trap 110mmx110mm long
1
227
227
(e) Nahani trap
3
271
90.5
(f) Vent covel (a) 110mm.
1
44
44
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete: 25 mm dia. nominal bore
25
6450
258
15 mm dia. nominal bore
5
745
149
Providing and fixing concealed in wall G.I. pipes medium class complete
with G.I. fittings and clamps, including painting with anti corrosive
bitumastic paint, cutting chases, making good the walls etc. and testing of
joints complete: 15 mm dia nominal bore
5
940
188
20 mm dia nominal bore
5
1105
221
Providing and fixing gun metal non- return valve (vertical type) of
approved quality (screwed end) : 25 mm nominal bore
3
1353
451
Providing and fixing stainless steel drain jali of approved make/quality.
2
102
51
Providing and fixing 15 mm nominal bore Brass bib/stop cock of
approved quality: Bib cock (350 grams)
4
948
237
Stop cock (600 grams)
1
237
237
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
500
3650
7.3
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
3418
1709
Wiring for light/ fan/ exhaust fan/ call bell point with 1.5 sqmm. FR PVC insulated stranded copper conductior single core cable in concealed steel conduit, with 5amp piano type swich, phenolic laminated sheet, suitable size M.S. box and earthing the point with same size cable etc as required. Short point
8
1888
236
Medium point
6
2328
388
Long point
2
1106
553
Extra for providing and fixing light plug point on baard in concealed steel conduit point wiring with piano wiring with plano type 3pin 5Amp socket outlet and 5 Amp switdch i/c cost of phenolic laminated sheet and M.S. box etc. as required. 3 pin, 5 Amp. Socket outlet point on same board.
6
570
95
Wiring for light plug point with 2x2.5 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 6amp switch and 3pin 6 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required. Short point
1
339
339
Medium point
1
582
582
Long point
1
869
869
Wiring for power plug point with 2x4 sqmm. FR PVC insulated stranded copper conductor cable in concealed steel conduit allong with piano type 16amp switch and 6 pin 16 amp socket outlet with suitable size M.S. box, phenolic laminated sheet, earthing the switch box and socket outlet with same size cable etc. as required.Short point
1
501
501
Medium point
1
846
846
Long point
1
1259
1259
Wiring for circuit / sub main wiring allong witrh earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed steel conduit as required. 3x2.5 sq. mm in 20 mm conduit
55
5720
104
6x2.5 sq. mm in 20 mm conduit.
25
4300
172
Earhting with copper earth plate 600 mm X 600 mm X 3 mm thkick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe.
1
6754
6754
Supplying and laying 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode, i/c solding etc. as required.
6
456
76
Providing and fixing metal clad, SP&N switch fuse unit (re-wirable), 230/250 volts, with porcelain re-wireble fuse i/c drilling holes on the board, connections, earthing the body etc. as required. (Thimbeling shall be paid seperately) 32 amps
1
931
931
Supplying and fixing on surface/ recess following way, 240volts, SPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, i/c interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator). 4 way, Single door
1
602
602
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.6 amps. to 32 amps
4
1712
428
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps.
1
271
271
4 x 10 Sq.mm.
20
5560
278
Supplying and hanging following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on GI bearer wire (binded at every metre) including cost of bearer wire complete as required.4 x 10 sq. mm. on 8 SWG GI bearer wire
20
2700
135
Providing and fixing round/ hexagonal fan box (125 mm. dia) depth 75mm. (max) with 12 mm. dia steel bar hook, 1.6 mm. thiuck MS sheet cover, in RCC slab etc. as required
2
85
42.5
Supplying and fixing metal box of following sizes (nominal size) in recess with suitable size phenolic laminated sheet cover in front i/c painting etc as required.100 mm. x 100 mm. x 60 mm. deep
1
93
93.5
150 mm. x 75 mm. x 60 mm. deep
1
99
99
180 mm. x100 mm. x 60 mm. deep
1
121
121
200 mm. x 125 mm. x 60 mm. deep
2
448
224
Supplying, instaling, testing and commissioning of following sizes ceiling fan with resistance type regulqator, i/c wiring the down fods of standard length up to 30 cm. with 1.5 sq. mm. FR PVC insulated, copper conductor, sinle core cable, earthing etc. complete as required. 1200 mm. sweep
2
3006
1503
Supplying, installation, testing and commissioning of following T-5 fluorescent fitting (luminaries) complete with electronic ballast but without fluorescent lamp, on ceiling/wall surface, earthing the fitting etc. as required. Single box type with decorative end caps
2
544
272
Supplying, installation, testing and commissioning of following CFL down lighter luminaries wth mirror reflectore, but without CFL lamp, on surface / recess inb false ceiling i/c connection, testing and commissioning as required. For 1x13/18 watt CFL with cover
2
1934
967
Providing and fixing water closet squatting pan (Indian type W.C. pan ),100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete include
Coloured Orissa pattern W.C. pan of size 580x440 mm
4
14180
3545
Tee/ Tee with door/ Bend 45°/ Bend 90° 110 mm
16
2464
154
Vent covel. 75 mm
3
102
34
"P" trap 110mmx110mm long
-
-
227
Nahani trap 110x75mm
10
905
90.5
Providing and fixing on wall face or under floor UV stabilized
Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
110 mm dia pipe.
40
10680
267
75 mm dia pipe.
50
9100
182
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :
10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes
including bed concrete 150mm thick as per standard design:
100 mm diameter S.W. pipe
40
14280
357
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats
including S.W. drain pipe 100 mm diameter and 1.20 m long complete as
per standard design.
3
5127
1709
Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks
crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
100x100 mm size P type
4
5356
1339
Providing and fixing white vitreous china urinal basin with waste fitting
as per IS : 2556, and other couplings in C.P. brass complete:
Flat back type urinal of size 460x380x250mm
3
4587
1529
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Size 550x450 mm
4
5720
1430
Providing and fixing one piece construction white vitreous china
squatting plate urinal with an integral rim longitudinal flushing pipe.
1
1401
1401
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not
less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight
of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation
concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
3
11388
3796
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and
making good the walls wherever required :
345x445 mm bowl depth 200 mm.
2
12596
6298
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin
including P.V.C. waste fittings complete.
40 mm dia
6
531
88.5
Providing and fixing PVC waste coupling in wash basin/ sink.
40 mm
6
366
61
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
10
3820
382
Angle valve for basin mixer and geyser points (450 grams)
4
1528
382
Long nose bib cock (500 grams)
4
1820
455
Shower rose (revolving type) (150mm)
4
1076
269
Stop cock (concealed) (600 grams)
20
9880
494
Providing and fixing stainless steel drain jali of approved make/quality.
10
510
51
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):
40 mm nominal bore
4
2384
596
25 mm nominal bore
2
872
436
Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete : 20 mm nominal bore
2
788
394
15 mm nominal bore
2
568
284
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the
walls etc.,
25 mm nominal outer dia .Pipes.
150
31950
213
20 mm nominal outer dia .Pipes
80
13360
167
15 mm nominal outer dia .Pipes
20
2660
133
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
4000
29200
7.3
Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete M-35
grade, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap):
21
31605
1505
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
16.78
3104
185
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
7.19
2667
371
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
2.96
7870
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
649.22
35382
54.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
14.98
2082
139
Columns-rectangular or square in shape.
(i) Up to 4m height
15.36
4561
297
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
7.14
1442
202
weather shade chhajja cornies and moulding.
3.11
914
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
27.57
6478
235
Edge of slab breaks in floorand wall up to 200mm
17.3
588
34
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
6.18
25743
4163
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
6.68
21783
3263
Extra for brick work In S/S above plinth & up to floor five level.
12.95
43822
3384
Providing and laying damp proof course (upto 50mm thick) with plain
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed
stone aggregate 20mm nominal size) including form work.
0.22
932
4237
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like.
13.5
243
18
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
16.58
4211
254
Providing and laying ceramic glazed floor tiles conforming to IS : 15622
of approved size, make, colour, shade laid on 20 mm thick Cement
Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with
white cement mixed with matching pigment etc., complete.Size 300x300mm
7.02
4854
692
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622
of approved make, colours, shades and size on wall and dados over 12
mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and
jointing with grey cement slurry @ 3.3kg per sqm including pointing in
white cement mixed with matching pigment complete. Size above 200x300mm
33.81
21841
646
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:2:3 (1 cement : 2 coarse sand : 3 graded stone aggregate 20mm
nominal size).
0.04
162
4073
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
nominal size). In Super Structure
0.16
667
4170.5
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings
complete including applying a priming coat of red oxide zinc chromate
primer.
200
15000
75
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including
applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
25
1687
67.5
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
97.66
8935
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
82.64
8842
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
14.03
1220
87
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
194.33
4469
23
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
96.67
3673
38
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
97.66
4004
41
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
7.44
409
55
Exvavation for all types of foundations,trenches and drains or for any othere purpose including disposal of excavated stuff upto 50m lead and a lift upto 1.50 M. (at least 5.00 M. away from the excavated area) including dressing and leveling of pits. In all types of soil.
7.11
1315
185
Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm. In depth consolidating each deposited layer by ramming & watering including dressing etc complete.
2.95
1094
371
1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40 mm. Nominal size)
1.39
3696
2659
Providing and placing in position reinforcement for R.C.C. work including straightenigng, cutting, bending, binding etc. complete as per drawings including cost of binding wire and including all complete.Thrermo-mechanically treated bars.
297.79
16229
54.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :Foundations, footing, base of columns and plinth beam in any shape and size.
5.7
792
139
Columns-rectangular or square in shape.
(i) Up to 4m height
12.16
3611
297
Beams, lintel, cantilevers & walls.Up to 4.00 M. height from P.L.
2.85
575
202
weather shade chhajja cornies and moulding.
4.42
1299
294
Suspended floor roof access plate form balconies (plain surface)and shelves(cast in situ)
6.29
1478
235
Edge of slab breaks in floorand wall up to 200mm
11.7
397
34
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works up to floor five level excluding cost of form work. 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
3.05
12684
4163
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
0.88
2871
3263
Extra for brick work In S/S above plinth & up to floor five level.
5.13
17359
3384
Providing and laying damp proof course (upto 50mm thick) with plain
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed
stone aggregate 20mm nominal size) including form work.
0.1
423
4237
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like.
9.5
171
18
Cement concrete flooring with cement concrete 1:2:4 concrete (1 cement : 2 course sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50mm thick
4.63
1176
254
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:2:3 (1 cement : 2 coarse sand : 3 graded stone aggregate 20mm
nominal size).
0.02
81
4073
Providing and laying nominal mix plain cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm
nominal size). In Super Structure
0.1
417
4170.5
Steel work in tubular structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.Electric resistance or induction butt welded tubes Grade-300. Upto 5.00 M. height.
816
76296
93.5
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings
complete including applying a priming coat of red oxide zinc chromate
primer.
100
7500
75
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including
applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
50
3375
67.5
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
6
2082
347
Extra for providing and fixing wind ties of 40 x 6 mm flat iron section.
2
236
118
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
41.55
3801
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
27.31
2922
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
6.73
585
87
Applying one coat of cement primer on wall surface (applied @ 0.80
litrs/10 sqm) complete.
75.59
1738
23
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
34.04
1293
38
White washing with whiting to give an even shade. On new work (Three or more coats)
50
450
9
Finishing walls with water proofing cement paint of required shade to give
an even shade. On new work (Two or more coats applied @ 3.84 kg/10 sqm)
41.55
1703
41
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
4.28
235
55
Boring, Providing and installing cast in situ single under reamed piles of
specified diameter and length below pile cap in cement concrete M-35
grade, to carry a safe working load not less than specified, excluding the
cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap): 300 Mm dia piles
300
451500
1505
550 mm dia piles
300
328200
1094
Providing and placing in position reinforcement for R.C.C. work including
straightening, cutting, bending, binding etc. complete as per drawings
including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 415
15912.03
867205
54.5
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc complete and including its removal all levels for :-
(a) Foundations, footing, base of columns and plinth beam in any shape and size.
738.96
102715
139
Columns-rectangular or square in shape.
Up to 4m height
430.18
127763
297
Window sill,anchore string course bend coping bed plate and like(i) Up to 4.00 M. height from P.L.
195
35880
184
Beams, lintel, cantilevers & walls.
Up to 4.00 M. height from P.L.
3.63
733
202
weather shade chhajja cornies and moulding.
2.68
787
294
Providing and laying nominal mix reinforced cement concrete with crushed
stone aggregate using concrete mixer in all works upto plinth level
excluding cost of form work.
(a) 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20 mm. Nominal size)
100.85
419838
4163
Brick work with modular fly-ash lime bricks (FALG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Sand)
31.88
104024
3263
Extra for brick work In S/S above plinth & up to floor five level.
236.96
801872
3384
Providing and fixing M.S. frames of doors, windows, ventilators and
cupboards joints mitred and welded with 15x3 mm lugs 10cm long
embedded in cement concrete blocks 15x10x10cm of grade M-10 or with
wooden plugs and screws or with dash fastener or rawl plugs and screws
or with fixing clips or with bolts and nuts as required including fixing of
necessary butt hinges and screws and applying a priming coat of
approved steel primer. Angle-iron frames
2754.87
202482
73.5
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings
complete including applying a priming coat of red oxide zinc chromate
primer.
56.37
4227
75
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo
floor/ cement concrete floor or like. 40 mm wide
4.6
82
18
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating
coat of neat cement.50mm thick
5.29
1343
254
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
7.5
2602
347
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
1557.41
166642
107
Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand)
19.74
1717
87
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand)
1571.45
143787
91.5
Filling from available stuff (Excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm. in depth consolidating each deposited layer by ramming and watering with a lead up to 50M. and lift up to 1.5M.
401.86
26120
65
Extra for lining over plaster to imitate stone or concrete block walling.
660
15510
23.5
Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior
paint of required shade as per manufacturer's specifications to give
protective and decorative finish including cleaning washing of surface etc.
complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and
including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
3561.48
265330
74.5
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/
wooden/ angle iron posts (straight or diagonal) including securing and
screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc.,
complete(Cost of posts, struts to be paid for separately)
5250
49350
9.4
Painting on new work (two or more coats) to give an even shade with: Aluminium paint
83.3
4873
58.5
Providing and fixing in position door shutter made of square/ rectangular
hollow steel tube of approved size joint mitred, welded frame with two
Nos. intermediate rails, 200mm wide lock rail made of 1.6mm thick M.S.
sheet welded to intermediate rail, M.S. grill of approved pattern made of
M.S. flat or square or round bars welded to frames and provided M.S. butt
hinges, all necessary fitting and finished by filling putty including applying
a priming coat of red oxide zinc chromate primer all complete. (To be used
in safety door shutters in buildings)
400
37400
93.5
Excavation in Soil (by Manual Means.) Excavation for roadway in soil using including loading in tipper for carrying of cut earth to embankment site and unloading with all liftsand lead upto1000 meters as per relevant clauses of section 300. (a) Ordinari Soil
7469.04
1045665
140
Transportation of metal i/c loading & unloading (a) Excavated / Compacted ordinary and other soil
7469.04
963506
129
Providing and filling in plinth with sand/ Crusher dust and hard moorum
under floor in layers not exceeding 20cm in depth consolidating each
deposited layer by ramming and watering, including dressing etc.
complete.
4083.86
1878575
460
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire,
placing in position , providing shuttering and concreting by using
concrete mixer, compaction by vibration etc complete as per
drawings and technical specifications.
400
1036800
2592
Construction of sub-grade with Material Obtained from
Borrow Pits/Borrow Area (Construction of sub-grade with
approved material/selected soil having C.B.R.8 (unless specified
otherwise in the contract) obtained from borrow pits with all lifts
and leads, transporting to site, spreading, grading to required slope
and compacting to meet requirement of table 300-2)
2029.2
507300
250
Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, ,
carriage of mixed Material to work site, spreading in uniform layers
with motor grader on prepared surface watering, rolling and
compacting with vibratory power roller at OMC to achieve the desired
density, complete as per clause 401 For Sub-base cum drainage layer or upper sub-base with Grading-V Material
2545.35
3492220
1372
Wet Mix Macadam (Providing, laying, spreading and compacting
graded stone aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix plant
carriage of mixed Material by tipper to site, laying in uniform layers
with paver in sub- base / base course on well prepared surface and
compacting with vibratory roller to achieve the desired density as per
clause 406.)
3073.77
4407786
1434
Dry Lean Cement Concrete Sub-base as per IRC:SP-49
(Construction of dry lean cement concrete Sub-base over a prepared
sub-grade with coarse and fine aggregate conforming to IS: 383, the
size of coarse aggregate not exceeding 26.5 mm, aggregate cement
ratio not to exceed 15:1, aggregate gradation after blending to be as
per table 600-1, cement content not to be less than 150 kg/cum,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7 days,
mixed in a batching plant, transported to site, laid with a paver with
electronic sensor, compacting with 8-10 tonnes vibratory roller,
finishing and curing as per clause 601.)
1241.95
2896227
2332
Cement Concrete Pavement (Construction of un-reinforced, dowel
jointed, plain cement concrete pavement over a prepared sub-base,
coarse and fine aggregate conforming to IS:383, and graded as per
table 600-3, mixed as per approved mix design at site, laid, spread,
vibrated, compacted and finished in a continuous operation including
provision of contraction, expansion, construction and longitudinal
joints, joint filler, separation membrane, sealant primer, joint sealant,
de-bonding strip, dowel bar, tie rod, admixtures as approved, curing
compound, finishing to lines and grades as per drawing as per clause
602.) (i) With Cement concrete grade M-40 and minimum cement content @
400 kg/cum.
2334.01
10988519
4708
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements