South East Central Railway Tender

Scrap Stainless Steel Cut Up Parts Of Cond. Wagons To Be Sold Without Bogie And Excluded Fittings As Per Crse/ Bsp Letter No. Mech. /hq/ 003/007 /4016 Dt. 12.11.2018 [excluded Fittings-coupler Body, Knuckle, Knuckle Pin, Draft Gear, Yoke ,bogie End Pull Rod, Brake Cylinder Complete With Piston Rod And Suspension Bracket, Yoke Pin,ctrb, Wheel Sets And Roller Bearing, Bogies, Icf Trolley Bvzi, Distributor Valve.] & Front Follower Of Draft Gear Vide Pcme/bsp's Letter Mech/hq/010/010/warranty Dtd. 09.06.2020. Remark: 1. Wagons May Be Grounded For Clearing Of Track. 2.wagon Component Must Be Cutup Before Lifting By The Purchaser, So That Component Can Not Be Re-used. 3. Boxnr Wagons Having Stainless Steel (irs M44) Side Body, End Body & Floor Are Upgraded & Rehabilated Version Of Boxn Wagons. 4. Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. 5. To Be Sold On "as Is Where Is Basis" 6. Cbc Components To Be Handed Over Sepretarely In Placemeal.

Released Packing Material Dumped At Designated Locations, Consisting Of - (i) Wooden Packing = 5000 Kgs (approx) And (ii) Card Board Boxes = 500 Kgs.(approx) Nb: (1) Purchasers Are Not Allowed To Lift Any Ferrous Or Metallic Material (2) Weighment Of Scrap Material Shall Be Taken At Gsd/r For Delivery Purpose. (3) The Offered Scraps Is "as In Where Is" Basis. Bidders Are Advised To Visit The Site First, For Assessment Of Work. (4) As Locations Are Inside The Workshop, All Factory Safety Procedures Regarding Gas Cutting , Material Handling Are To Be Followed.

Condemned Uic Type Trolley = 02 Nos And Casnub 22wm Type Trolley = 36 Nos. To Be Sold On "as Is Where Is Basis" Note (i) Delivery Should Be Done Only After Cutting Of Condemned Bogies (ii) Excluded Fitting Includes Complete Wheel Set With Both Ctrb (cartridge Tapered Roller Bearing), End Caps, Backing Rings & End Cap Screws. (iii) Excluded Fittings Are To Be Hand Over To Representative Of Wrs/r (iv) Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. (v) After Dismantling Of There Bogies With Wheel Sets These Wheel Sets, Bearings, End Cap And End Cap Screw Will Be Treated As Excluded Fitting Of Condemned Wagons & It Will Be Brought Inside Wrs/r To Handover It To Wheel Shop.

Lot Of Scrap Condemned And Unserviceable One Number Fip Calibration Test Bench For Alco Loco. Make ¿sahayadri-piune, Model No.- E-ii-10, Pt No. 15513221.

(i) Flap, Plasser Part No: 64.08.1960, Make: Plasser.(ii) Main Scraper Duro-flex, Plasser Part No: 62.11.7000.81, Make: Plasser.(iii) Pin, Plasser Part No: 20j6m16x44x70din1438, Make: Plasser.

Iron And Steel Scrap Cut Up Parts Of Cond. Wagons To Be Sold Without Bogie And Excluded Fittings As Per Crse/ Bsp Letter No. Mech. /hq/ 003/007 /4016 Dt. 12.11.2018 [excluded Fittings-coupler Body, Knuckle, Knuckle Pin, Draft Gear, Yoke ,bogie End Pull Rod, Brake Cylinder Complete With Piston Rod And Suspension Bracket, Yoke Pin,ctrb, Wheel Sets And Roller Bearing, Bogies, Icf Trolley Bvzi, Distributor Valve.] & Front Follower Of Draft Gear Vide Pcme/bsp's Letter Mech/hq/010/010/warranty Dtd. 09.06.2020. Remark: 1. Wagons May Be Grounded For Clearing Of Track. 2.wagon Component Must Be Cutup Before Lifting By The Purchaser, So That Component Can Not Be Re-used. 3. Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. 4.in Bvzc Wagon Lb Springs To Be Cut Marked Before Delivery To Ensure Non-recycling Of Material. 5. To Be Sold On "as Is Where Is Basis" 6. Cbc Components To Be Handed Over Sepretarely In Placemeal.

Iron And Steel Scrap Cut Up Parts Of Cond. Wagons To Be Sold Without Bogie And Excluded Fittings As Per Crse/ Bsp Letter No. Mech. /hq/ 003/007 /4016 Dt. 12.11.2018 [excluded Fittings-coupler Body, Knuckle, Knuckle Pin, Draft Gear, Yoke ,bogie End Pull Rod, Brake Cylinder Complete With Piston Rod And Suspension Bracket, Yoke Pin,ctrb, Wheel Sets And Roller Bearing, Bogies, Icf Trolley Bvzi, Distributor Valve.] & Front Follower Of Draft Gear Vide Pcme/bsp's Letter Mech/hq/010/010/warranty Dtd. 09.06.2020. Remark: 1. Wagons May Be Grounded For Clearing Of Track. 2.wagon Component Must Be Cutup Before Lifting By The Purchaser, So That Component Can Not Be Re-used. 3. Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. 4.in Bvzc Wagon Lb Springs To Be Cut Marked Before Delivery To Ensure Non-recycling Of Material. 5. To Be Sold On "as Is Where Is Basis" 6. Cbc Components To Be Handed Over Sepretarely In Placemeal.

Scrap Stainless Steel Cut Up Parts Of Cond. Wagons To Be Sold Without Bogie And Excluded Fittings As Per Crse/ Bsp Letter No. Mech. /hq/ 003/007 /4016 Dt. 12.11.2018 [excluded Fittings-coupler Body, Knuckle, Knuckle Pin, Draft Gear, Yoke ,bogie End Pull Rod, Brake Cylinder Complete With Piston Rod And Suspension Bracket, Yoke Pin,ctrb, Wheel Sets And Roller Bearing, Bogies, Icf Trolley Bvzi, Distributor Valve.] & Front Follower Of Draft Gear Vide Pcme/bsp's Letter Mech/hq/010/010/warranty Dtd. 09.06.2020. Remark: 1. Wagons May Be Grounded For Clearing Of Track. 2.wagon Component Must Be Cutup Before Lifting By The Purchaser, So That Component Can Not Be Re-used. 3. Boxnr Wagons Having Stainless Steel (irs M44) Side Body, End Body & Floor Are Upgraded & Rehabilated Version Of Boxn Wagons. 4. Boxnhl Wagon Having Stainless Steel (irs M44), Side Body, End Body & Floor. 5. Weight Is As Per The Challan Provided By The Stock Holder And It Is For Reference Only. 6. To Be Sold On "as Is Where Is Basis" 7. Cbc Components To Be Handed Over Sepretarely In Placemeal.

Lot Of Released Gusset Plate- 3.096 Mt At Sse Bridge Store Raipur, Released Fob Material ¿ 2.014 Mt At Bhilai 3 Station Near P.way Store, Released M.s. Steel Girder (pices) ¿ 1.10 Mt At Sse Bridge Campus Raipur, Released Ms Angle, Ms Plate, Bearing Plate, Ismb , Chequred Plate Etc. ¿ 3.65 Mt At Sse Bridge Store Campus Raipur, Released Corression Guard ¿ 18.30 Mt At Sse Bridge Campus Raipur

Misc. Wooden Scrap (packaging Palate And Wooden Plank).

Misc. Wooden Scrap (packaging Palate And Wooden Plank).

Condemned And U/s Over Aged One Diesel Locomotive (type-wdm3a) No. 16685. Name Of The Major Component Included For Sale - Complete Body Including Bogie Super Structure, Traction Alternator, Traction Motor, Ccm, Fpm, Radiator Fan, Radiator, Compressor, After Cooler, Gov., Lub Oil Pump, Water Pump & Tsc, Bull Gear, Axle Box, Msu Excluding Battery And Wta Item I.e. Wheel And Axle.

"mixed Ferrous Melting Scrap Amalgamating Various Type Consisting Of Melting Scrap Class Mf/10, Pl/8, Pl/4, Mp/3, B/9, B/14, Cs/1, Cs/2, Hf/1, B/10, B/11, Mp/6, J/4, Db/1,p/4, Mp/1, Mp/4, Sp/3 And St/2 (small Qty. In Mixed Condition), Mp/5, Gi Nuts And Bolts,iron Chair And Small Parts, Cbc Component With Or Without Rubber Attachement, Twin Pack Draft Gear F-325 G Gi Rods ,brake Beam And Air Reservoir Tank, Pipe, Including Up To 5 Kgs Cast Iron With Ms Attachments. As Available As In The Lot. Nb - Cutting Not Allowed .

"mixed Ferrous Melting Scrap Amalgamating Various Type Consisting Of Melting Scrap Class Mf/10, Pl/8, Pl/4, Mp/3, B/9, B/14, Cs/1, Cs/2, Hf/1, B/10, B/11, Mp/6, J/4, Db/1,p/4, Mp/1, Mp/4, Sp/3 And St/2 (small Qty. In Mixed Condition), Mp/5, Gi Nuts And Bolts,iron Chair And Small Parts, Cbc Component With Or Without Rubber Attachement, Twin Pack Draft Gear F-325 G Gi Rods, Brake Beam And Air Reservoir Tank, Pipe, Including Up To 5 Kgs Cast Iron With Ms Attachments. As Available As In The Lot. Nb - Cutting Not Allowed .

Misc. Ferrous Scrap With Or Without Minor Amount Of Non Ferrous Alloy.

Misc. Ferrous Scrap With Or Without Minor Amount Of Non Ferrous Alloy.

Total Qty. = 6.052 Mt, Description:- 1) Lot No. Bsp.01, Flood Light Tower No.-1 Beyond Near Pf No. 4 And 5(hwh End). 2) Lot No. Ksk/akt/02, Flood Light Tower At Exchange Yard, Ballast Siding, Akaltara In Between Ohe Mast No. Ci/58-59. Special Conditions - 1) At The Time Of Dismantling/cutting Of Tower, Power Block May Be Required And Concerned Sse/ohes & Sse/elect.(general) Will Assist For This Work For Smooth & Safe Dismantling Of Flood Light Towers. Remarks - 1) All Flood Light Towers Are In Standing Position. 2) Dismantling/cutting Of Flood Light Tower Will Be Done By The Purchaser At His Own Cost & Risk Without Causing Any Loss Of Railway Property. 3) After Dismantling Released Material May Be Moved Manually Within Lead Of 30 Meters From Stacking Point. 4) Any Loss Due To Theft, Accident Etc. Shall Be The Sole Responsibility Of The Purchaser And No Claim On This Account Will Be Entertained By The Railway. 5) Due To Complexity Of Lots, Free Delivery Period Against This Lot Will Be 80 Days As Per Railway Board Letter No. 2015/rs(s)/709/5 Dt. 29/01/2016 Under Chapter No.-7.4. 6) Material To Be Sold On As Is Where Is Basis And Will Be Delivered In Weight.

Cdms 2602" "lot Of Scrap Non-ferrous Consisting Of Scrap Sort And Sizes Signal And Telecom Copper Cable I.e. 12 Core, 18 Core, 19 Core,24 Core, 30 Core, 6 Quad Etc. With Or Without Iron, Aluminium And Other Attachment As Available As In The Lot. Nb:- Moef Certificate Required.

Released Unserviceable Wagon Components And Cut Sheets (mms) Except Cbc Components Of 6000 Roh/rsp Work.

Lot Of Scrap Ferrous With Non- Ferrous 3 Phase Ac Fuel Pump Motor With Built Inverter With Or Without Broken Condition With Or Without Nf,and Other Attacment As Available As In The Lot.