South East Central Railway Tender
... More
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
South East Central Railway - SECR Tender
Electrical and Electronics
Electrical Works
Ireps
Opening Date8 Feb 2025
Closing Date11 Mar 2025
Tender Amount₹ 8,54,18,847.24
Costs
EMD
₹ 5,77,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Replacement Of Panel Interlocking With Electronic Interlocking ( Ei) At Bhanwartank( Bhtk) Station Of Bilaspur Division Of Secr.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
87-SNT-Proj-Tender-2024-PROJ-BSP-S AND T/SOUTH EAST CENTRAL RLYTender No
87-SNT-Proj-Tender-2024Tender Authority
South East Central Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
"Shunt signal position light type complete with post base Drg No. SA 23840 Adv.Alt.1, S-23203 Adv., with 90 mm dia mounting socket Drg No S-23845 (Adv.).Inspection by Rep. of Railway Engineer."
2
6078
12156
... More
"Shunt signal dependent type Drg.No.SA-23840(Adv) Alt.1 & S-23845 Adv. with off-set bracket to Drg. No. SA23080 Adv. Alt. 1 & specn. No. IRS:S-10/78 to suit 140mm. Outside dia post complete.Inspection by Rep. of Railway Engineer."
2
4498
8996
... More
Calling on signal (CLS Type ) Drg.No: SA-24351(Adv.), Spec.No.IRS-S-10/78, IRS :S-26/64. Inspection by Rep. of Railway Engineer.
8
2732
21856
... More
Route Indicator junction direction 5 lamp type with Arms and drum complete but without lens and lamps, 3 way RH/LH.Drg.No.SA23403 (Adv) for 3 way.Spec.No.IRS:S-66/84 with latest amd, IRS:S- 23/88, IRS:S-10/78, IRS:S 26-64. Inspection by Rep. of Railway Engineer. 8
4
16567
66268
... More
Tubular post for CLS 5.5 Mtr. Spec.IRS.S-6/81. Inspection by Rep. of Railway Engineer. 9
21
2857
59997
... More
Signal.base 140mm.dia(type tube) Drg.No.S-2011/M. Inspection by RITES.
21
7134
149814
... More
Ladder 5.5Mtr for CLS Drg.No.SA-23156(Adv)Alt-1.Spec.No.IRS-S-10. Inspection by Rep. of Railway Engineer.
21
4082
85722
... More
Off set bracket for colour light 140 mm. outside dia post Drg. No. SA-23080(Adv) Alt-1.IRS-S- 10- 78. Inspection by Rep. of Railway Engineer.
21
974
20454
... More
Marker 'C' non-illuminated Drg. SA- 2435 (Adv.) Spec. No. IRS-S-7 . Inspection by Rep. of Railway Engineer.
30
320
9600
... More
Steel Apparatus Case(Large) as per Drg.No.Con/SK/1/1/86 , with E type lock on both side having ward No.32. Inspection by RITES.
50
15782
789100
... More
Relay Rack for 'Q' Series Relay as per Drg. No: SK/DRG/OL/SER/192 SH 2/2. The relay racks must be powder coated of stone grey colour. Inspection by Rep. of Railway Engineer
2
9386
18772
... More
Composite Relay Rack as per drg.No.SK/DRG/OL/SER/192- SH1/2.The relay racks must be powder coated of stone grey. Inspection by Rep. of Railway Engineer
3
10395
31185
... More
Cable termination racks as per Drg. No:SK/DRG/OL/SER/197. The relay racks must be powder coated of stone grey colour. Inspection by Rep. of Railway Engineer
2
3088
6176
... More
Wiring ladder of 25x25x3mm. Aluminum angle and 20x3mm.flat, 2 Mtr. Inspection by Rep. of Railway Engineer. Inspection by Rep. of Railway Engineer 18
200
267
53400
... More
Negative Bus bar16 way 18 ". Inspection by Rep. of Railway Engineer. 19
10
226
2260
... More
Earth Electrodes to Drg. No: Con/SK/8/3/84. Inspection by Rep. of RITES. 20
70
1213
84910
... More
Supply of pinnacle SA-2019A for tubular signal post . Inspection by Railway Engineer..
9
784
7056
... More
Pad Locks of godrej make model Nav-tal - 6 Levers - Long Shackle (3 keys) or latest. Inspection by Rep. of Railway
7
550
3850
... More
Supply of pipe lock signal unit ( Handcuff lock)(Minimum one key for each lock). Inspection by Rep. of Railway
60
123
7380
... More
2 conductor through terminal block, 1000 Volt Ac, 125 AMP, suitable for conductor of size : 10,16 & 25 sq mm, wago model No. 285 135 Grey colour; make wago or similar. (10 sq mm- 1000 no., 16 sq mm- 300 no. , 25 sq mm-100 no.).Inspection by Rep. of Railway Engineer. Sr. no (26-32) 24
50
486
24300
... More
Adjacent Jumper for above TB, WAGO PNo. 285.435 25
20
107
2140
... More
Protective warning marker for above P No. 285-420 26
20
31
620
... More
Shock protector for above : P No. 285-421 27
20
23
460
... More
WMB multi marking system for above , P No. 2009-115 28
20
4010
80200
... More
Rail for above 35mm x 15 mm, 2.3 mm thick no. 210 -198 29
1
11168
11168
... More
Operating tools with partially insulated shaft, P No. 210-721
2
842
1684
... More
"PVC insulated GI flexible wire for lead wire of track circuit used in Railway signalling. Dia 6mm 30 (19 Sqmm cross sectional area) Constrction 7x7 core WSC. Lay Right Hand ordinary. Finish Galvanised. Tensile strength 125-140kgf/sqmm. Confirming to IRS S3-61. PVC thickness 1mm. O.D. 8mm. Colour of PVC Red- 50% & Black-50%. Make:Bharat or similar. Inspection by Rep. of Railway Engineer." 31
1500
66
99000
... More
Channel pin 7 mm dia. Inspection by: Representative of Railway Engineer.
1000
1
1000
... More
Low maintenance lead acid stationary secondary cells for S&T installations made of hard rubber container and with initial charging of nominal voltage 2 volts as per Specn.No.IRS-S-88/2004 with latest amd. Inspection by RDSO. (i)80 AH
60
3036
182160
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment(a) 7/0.75 mm dia.(Red & Black).Representative of Railway Engineer.
2
47061
94122
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendmentV (b) 3/0.75 mm dia. (Red & Black).Representative of Railway Engineer.
2
22816
45632
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendmentV (c) 16/0.2 mm dia. (80% grey & 20% yellow)Inspection by RDSO.
22
10784
237248
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendmentV (e). Indoor cable as per IRS-S-76/89 with latest ammendment. 60x0.6 mm dia,Inspection by RDSO.
1
147469
147469
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment.(a) 1x 1.5 Sq mm flexible wire (Red-45%, Black-45% & Green-10%).Inspection by Rep. of Railway Engineer.
1
26569
26569
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment.V (b) 2x 2.5 Sq mm flexible wire (Red-15%, Black-50% , Green-20%, blue-7.5% & Yellow- 7.5 %).Inspection by Rep. of Railway Engineer.
1
35877
35877
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. (c) 1x 4.0 sq mm flexible wire (Red-45%, Black-45% & Green-10%).Inspection by Rep. of Railway Engineer.
4
39683
158732
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. (d) Multi strand ISI copper cable (10 Sq.mm ) (Red-45%, Black-45% & Green-10%).Inspection by Rep. of Railway Engineer.
4
116166
464664
... More
(ii) Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest ammendment. (e) Multi strand ISI copper cable (16 Sq.mm ) (Red-45%, Black-45% & Green-10%).Inspection by Rep. of Railway Engineer.
1
122245
122245
... More
Electric point operating machine IRS type ( AC immunity 160 V AC) non trailable, to operate on 10 110 V DC complete with lock, detector, cable termination box and slides for lock and detector- rotary locking, universal type as per specification IRS-S-24/2002 & For Motar IRS:37/82 with latest amendment, Drg. No. RDSO/S 10800 ( for motor Drg. no. RDSO-S/10910). Inspection by RDSO.
4
96469
385876
... More
Ground connection for universal type point machines (110V DC) complete with insulating materials (5 Rods) as per Drg.No.(I)SA 8805(ii)RDSO/S/3273(iii)RDSO/S/3271 (IV) RDSO/S/ 3267 (v)RDSO/S/3269, Switch extension bracket RDSO/S/3264 & Drive lug S 8806 . Inspection by RITES.
4
18579
74316
... More
" Electric Point Machine-IRS type 220mm Throw(CG make), High thrust(AC immunity 160 V AC), non-trailable to operate on 110 V DC complete with Lock & Detector slides, cable terminal box and Clamp lock 12 & Ground connections for 60 Kg. Rail confirming to IRS: S 24 /2002 & Assy. Drg. no.- RDSO/S/11000 & for Motor IRS : S 37/82. Details of Ground connection : Ground connection clamp type for 60 Kg rail 220 mm throw as per Crompton Greaves drawing (i) Lock Rod Drg. CSQ- 3456-57-58-59, (ii) Detector Rod Drg. No. CSQ@ 45"45$45%44@ (iii) Drive Rod Drg. no. CSQ-3460. This also includes supply of insulating materials as required for each set. Inspection by RDSO."
4
200459
801836
... More
"Track feed Battery chargers 110V-AC 50 C/S with boost and trickle charging for 1 or 2 or 3 cells 80 A.H.Spec.No.IRS:S-89/2013 with latest amd. Inspection by RDSO."
22
5172
113784
... More
Track lead Junction Box(4-way) made of fibre re-inforced plastic Drg. SI-10272 Alt. 'B'. as per Spec. No. IRS: SI0/ 78. This also includes 4 nos. of PBT terminals for the same. Inspection by Rep. of Railway Engineer
40
1039
41560
... More
Track feed resistance 30 ohms (2,4,8,16 Ohms) Drg. No. SA-20166 (Adv. ) Spec. No: IRS. S/23. Inspection by Rep. of Railway Engineer
20
171
3420
... More
Choke coil 'B' Type as per spec. no:IRS:S-65/83 with latest amendment if any. Inspection by RDSO.
40
4594
183760
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with latest amendment if any. (i) 1 Amp fuse catridge. Inspection by RDSO.
25
65
1625
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with latest amendment if any. (ii) 02 Amp fuse catridge. Inspection by RDSO.
50
81
4050
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with latest amendment if any. (iii) 04 Amp fuse catridge. Inspection by RDSO.
100
81
8100
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with latest amendment if any. (iv) 06 Amp fuse catridge. Inspection by RDSO.
50
73
3650
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with latest amendment if any. (v) 16 Amp fuse catridge.Inspection by RDSO.
25
79
1975
... More
Non-deteriorating type low voltage electric fuse for Railway signalling, rated voltage 240 V AC/DC fuse with cylindrical cap without indication size :14x 51 mm. Spec. no: IRS-S-78/92 with latest amendment if any. (b) Fuse Block for above fuse catridge Inspection by RDSO.
250
189
47250
... More
Polymeric Positive Temperature co-efficient device self restoring type 6 Amps, 16 V DC with soldering of 16/0.2 copper wire leads and crimping of copper pin type lugs suitable for Railway signal and 23 Telecom applications. Technical details (i) Holding current- 6Amps, (ii) Max Fault current rating- 100 Amps, (iii) Trip current- 10.2 Amps, (iv) Max time to trip time- 3.3 sec. (v) Max power dissipation - 2.8 watt, (vi) Max resistance= 0.028 ohms, (vii) Minimum resistance= 0.01 ohms, (viii) Max. Voltage rating= 16 VDC. Inspection by RITES.
50
48
2400
... More
ARA terminal for Signalling Installation with PBT materials . 6 Way (ARA terminal) Drg No.SA- 23756 Alt3, Specn No. IRS-S-75/2006 (Rev.-2) with latest amd. Inspection by railway engineer
750
361
270750
... More
Key Lock 'E' type with key Drg.No.SA-3376/M. Alt-2. Spec.No.IRS-S-30/64 different ward . Inspection by Rep. of Railway
4
1750
7000
... More
Key Lock Relay working with 24 V DC Non ACI type 4F/4B, Spec. no. IRS: S-23, IRS:S-34 & IRS: S- 46. Inspection by RDSO.
7
9244
64708
... More
Supply of the furnitures for SM / relay room. Inspection by Rep. of Railway Engineer. (a) Chair . Model PCH-5001T(Revolving) or latest. Make: Godrej .
2
14405
28810
... More
Supply of the furnitures for SM / relay room. Inspection by Rep. of Railway Engineer. (b) Table of Godrej make. Model No. WT 718 + ERU or latest
4
14375
57500
... More
Supply of the furnitures for SM / relay room. Inspection by Rep. of Railway Engineer. (d) 2 drawer filling cabinet STVFXDM 2086 or latest. Make: Godrej .
1
19770
19770
... More
200- Way Tag Block Spec.IRS-S-77/91 with latest amd & with Drg.No.SA-24751, 52, 53. Inspection by Rep. of Railway
2
3096
6192
... More
Supply of clip o n meter AC/DC with carrying case make Fluke or similar with standard accessories along with engineering and operating manual. Inspection by Rep. of Railway Engineer.
4
14713
58852
... More
Supply of disitilled water plant/Demineralised plant of (10-50-100 liter per hour) make Laptech/shivam or indicated by Railways. Inspection by Rep. of Railway Engineer. 34
1
27468
27468
... More
20 pair CT Box. Inspection by Rep. of Railway Engineer.
15
2419
36285
... More
"Supply of Universal thermoshrink jointing kit for derivation/ transformer joint for Jelly filled Six quad cable conforming to RDSO Spec.No :IRS-TC-77/2006(Rev.1) (With latest amendment). Inspection by RITES."
10
4133
41330
... More
2 Core Screened (sheilded ) cable size 16/0.20 mm(0.5 sq. mm. Whole) 650 volt grade as per specification No. IS 694/77 with jacket, make Empire or similar. Inspection by Rep. of Railway Engineer.
200
37
7400
... More
Supply of junction box for point machine as per the drawing number 59/17 issued by CSTE/SECR. Inspection by Rep. of Railway Engineer.
8
932
7456
... More
"Supply and installation of 'AXLE COUNTER section ' Board on steel rectangular board of size600mmX1000mm, 3mmM thick legend on coloured retroreflective tape engineering grade( yellow background, lettering AXLE COUNTER section in black)as per GR and rectangular board fitted on rail post through 2 nos. of suitable clamps. Inspection by Rep. of Railway Engineer."
8
8796
70368
... More
Wago Railway Engineer./phoneix terminal blocks (Part no.280-874). 4 conductor disconnect terminal block. It includes (i) 4 conductor disconnect terminal block for test and measurement; 0.08 mm.sq.- 2.5mm.sq., Center marking with slot test for test plug dia 2mm/0.079 In and dia 2.3mm/0.091 in; Carrier rail 39 din 35: front-entry; with knife disconnect large cage clamp connection, grey. (ii) End and intermediate plate, 2.5 Mm/0.394 in wide carrier rail din 35, grey (Wago part no. 249-117) (iii) Screw end stop for carrier rail (iv) steel carrier rail;35 X 7.5 mm, 1 mm /0.039 in thick; unslotted (Part no. 210-229/PW11-0000).(v) WSB quick marking system; horizontal; 1 ... 10 (10x); for width 5-17.5 Mm; 10 strips of 10 marker per strip (100) per card; consecutive numbers white (Part no. 209 - 502S). (vi) Adjacent jumper nominal current 24A; Insulated Grey. Inspection by Rep of Railway
1200
76
91200
... More
(a) Relay, Non-AC Immune, plug-in type, Style "QN1", Neutral line, 24V DC 12F.4B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABCDE. Inspection by RDSO.
50
3821
191050
... More
(b) Relay, Non-AC Immune, plug-in type, Style "QN1', Neutral line, 24V DC 8F.8B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:930, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABCDF. Inspection by RDSO.
100
3821
382100
... More
(c) Relay, AC Immune, plug-in type, Style "QNAI', Neutral line, 24V DC 12F.4B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABDFH . Inspection by RDSO.
25
4032
100800
... More
(d) Relay, AC Immune, plug-in type, Style "QNAI'', Neutral line, 24V DC 8F.8B contacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60, IRS:S 34 & IRS:S 23.The interlocking code for this unit shall be ABDGH. Inspection by RDSO.
50
4032
201600
... More
(e) Relay AC immune Plug in type Style'QNNA1, twin neutral line, 24VDC 6F/2B contacts each for 5 LH and RH, front and back contact metal to carbon , complete with plug board, retaining clips and connectors conforming to BRS:960,IRS:S 60, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be CDEHX. Inspection by RDSO.
25
5085
127125
... More
(f) Relay AC immune Plug in type Style'QNNA1', twin neutral line, 24VDC 4F/4B contacts each for 6 LH and RH, front and back contact metal to carbon , complete with plug board, retaining clips and connectors conforming to BRS:960,IRS:S 60, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be ACDHJ. Inspection by RDSO.
25
5085
127125
... More
(g) Relay Plug in type Style'QL1', Magnetically latched neutral line, 24VDC 11F/4B contacts each, front and back contact metal to carbon , complete with plug board, retaining clips and connectors conforming to BRS:935A, IRS:S 34 & IRS:S 23. Interlocking code of this unit shall be ABDEG. Inspection by RDSO.
10
6770
67700
... More
(j) Relay, AC Immune, plug-in type, Style 'QSPA1', Neutral line, slow to pickup, 24V DC, 8F.4B 8 contacts, front and back contacts metal to carbon, complete with plug board, retaining clip & connectors conforming to BRS:933A, IRS:S 60, IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be ABDEJ. Inspection by RDSO.
20
4944
98880
... More
(k) Relay Non- AC Immune, Plug in type, style 'QNN1', twin neutral line, 24V DC, 4F/4B contacts, 9 each for LH & RH, front & back contacts metal to carbon, complete with plug board, retaining clips and connectors, conforming to BRS: 960, IRS: S 34 & IRS : S23. The interlocking code for this unit shall be ACEHJ. Inspection by RDSO.
10
4944
49440
... More
(l) Relay Non- AC Immune, Plug in type, style 'QNN1', twin neutral line, 24V DC, 6F/2B contacts, 10 each for LH & RH, front & back contacts metal to carbon, complete with plug board, retaining clips and connectors, conforming to BRS: 960, IRS: S 34 & IRS : S23.The interlocking code for this unit shall be ACDEK. Inspection by RDSO.
10
4944
49440
... More
(m) Universal relay, plug in type, style AC/LED all aspects AC lamp proving relay unit with in 11 built current transformer type, slow release neutral line relay 4F/4B contacts, front and back contacts metal to carbon, shall be suitable for working in series with the 110AC LED signal lamp rated at 15W conforming to RDSO specn. no. BRS:941A , STS/E/RELAYS/AC
93
5015
466395
... More
(n) Relay, AC Immune, plug-in type, Style "QNA1K", Neutral line, 24V DC 1000 ohms 6F.6Bcontacts, front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS:931A, IRS:S 60, IRS:S 34 & IRS:S 23 & RDSO Spec. no. STS/E/Relay/UEA(PI). The interlocking code for this unit shall be CDEKY. Inspection by RDSO.
25
4804
120100
... More
Timer Relay Fail safe type of electronic time delay device - 24 Volt DC (Anuvidyuat make or similar) for Rly. Signalling as per Spec. No. IRS:S-61/2000 with latest amendment. The interlocking code pin for this unit shall be AFGKY. (with a time setting of 120 seconds). Inspection by RDSO.
5
2544
12720
... More
Timer Relay Fail safe type of electronic time delay device - 24 Volt DC (Anuvidyuat make or similar) for Rly. Signalling as per Spec. No. IRS:S-61 with latest amendment.The interlocking code pin for this unit shall be AFHKY. (with a time setting of 60 seconds). Inspection by RDSO.
5
2544
12720
... More
Electronic Magneto telephone desk type to Specn No.IRS-TC-79/2000. Inspection by Rep. of Railway Engineer.
4
4414
17656
... More
Supply of Single section Digital Axle counter as per RDSO specification no. RDSO/SPN/177/2012(Ver- 3) or latest, Phase Reversal Type, consisting of the following:(a)-High frequency Tx 16 coil & Rx coil (Each set consists of Web mounting type 2 nos. Tx and 2 nos. Rx coil) =1 set. (b) Track side digital axle counter unit DACF-710P =2 Nos. (c) Vital Relay box duly wired =2 nos. each with 2 nos. of 24 V, 1000 ohms, "Q" type relays. (d) Clamp with deflector plates and hardware etc =4 Nos. (e) Reset box = 2 Nos. (f) Surge voltage protection device box =2 Nos. Inspection by RDSO.
8
505512
4044096
... More
Supply of datalogger system for Railway S&T installation as per RDSO specification no. IRS:S- 99/2006 (ammedent - 3) (i) Digital Input 512, Analog Input 64. Inspection by RDSO.
1
497388
497388
... More
Installation, wiring, testing and commissioning of Digital Input 512, Analog Input 64 datalogger system as per RDSO specification no. IRS:S-99/2006 (ammedent - 3) or latest including networking and central monitoring along with installation
1
29408
29408
... More
Supply of External leased line modem as per RDSO specition no. IRS:S-99/2006 amadt-3 or latest.. Inspection by RDSO.
1
28071
28071
... More
Supply of block proving with Digital Axle Counter as per RDSO spec. no. IRS: S - 105/2012 or latest using UFSBI & Block panel for single line operation. Inspection by RDSO Note:-The above consisting of 20 following :-(1)Universal fail safe block interface as per RDSO Specn no.RDSO/SPN/147/2005 (Latest ammendments)- 2 nos. (2)SM's Panel (RDSO/S/32019 tentative- 2 nos. (3)Relay Rack with locking and sealing arrangement duly wired (as per RDSO/S/32020 -tentative)- 2 nos. (4) Relays:- QN1- 44 nos.,QNA1-12 nos. QL1- 4 nos. Timer- 2 nos. (5) Block Telephone- 2 nos
2
1028577
2057154
... More
Supply of Automatic Media changeover of UFSBI working on redundant channels for data transmission on OFC/ Quad. Inspection by Rep. of Railway Engineer.
4
35386
141544
... More
Supply of Modem compatible with existing UFSBI system(for secondary/back up media) along with class D /Type III SPD
4
69087
276348
... More
Installation, testing and commissioning of Automatic Media changeover Modern for use with secondary/back up media.
8
17850
142800
... More
"Earthing and bonding system as per RDSO Spec. No. RDSO/SPN/197/2008, RDSO Drg. No. SDO/RDSO/E&B/001 dt. 19.09.08 and RDSO Drg. No. SDO/RDSO/E&B/002 dt. 19.09.08. Earthing and bonding system for Relay Room , IPS Room ,SPD Box, Operator panel in SM's room, signalling equipments in Station 24 building, Block circuit, SSDAC,etc. Inspection by RITES. Supply of "Permanent and Maintenance Free Earth pits materials".1 Set PMF earth pit consisting of: (i)17 mm diameter and minimum 3 m long Copper Bonded Steel Rod - 1No.(ii)GEM- 25 lb - 3 Bags. (iii)25*6*150 mm Cu Bus Bar- 2 No .(iv) Cu lugs and nut bolt 2 nos (v) Supply for Connection between Earthpits and MEBB It includes 35 sq mm multi-strand pvc insulated single core Cu cable (15 mtr Lump Sum).(vi) BB and to other equipments. (50 mtr Lump Sum).It includes 16 sq mm and 10 sqm"
5
23526
117630
... More
Installation, testing and commissioning of Permanent and Maintenance Free Earth pits. Installation charges : Earthpit (1 Set) It includes, (i)Civil works related to earth pit digging, PMF earth pit installation,,back filling and chamber making (ii)Materials for chamber including Chamber Cover
5
5882
29410
... More
Supply of protocol converter to suit with the dataloggers of the station. Inspection by Rep. of Rly. 27
1
12833
12833
... More
Installation and wiring of protocol converter to suit with the dataloggers of the station .
1
3208
3208
... More
Supply of Door Proximity switches along with 2 way rigid connector for wire termination between proximity switches and Datalogger Tag blocks as per specs. Inspection by Rep. of Railway Engineer.
-
-
28
... More
Supply of Tool Kit for Multi Section Digital Axle Counter. Inspection by Rep. of Railway Engineer. 29 (i)Fluke 289 or latest Digital multimeter of for MSDAC system with Probe set = One no.(ii)Torque wrenches 25- 135 N/Mtr (iii)Set of Spanners Screw driver and soldering iron suitable for MSDAC.(iv) Dummy wheel (v)Marking Jig (vi)Adapter Card. (vii)DAC EC Card Puller.
1
140357
140357
... More
Supply of VF tapping termination transformer to specification IRS-TC-22/76 for 470:1120, 1120:600, 1120:1120. Inspection by Rep. of Railway Engineer.
8
1106
8848
... More
Supply of fuse indication cum monitoring and automatic changeover system as per RDSO 31 specification no. RDSO/SPN/209/2012 Rev. 0 or latest. The system shall be supplied along with all standby fuses placed in the system. In addition to it, spare quantity of 100% fuses of each type shall also be supplied along with the system. Inspection by RDSO. For 32 fuses per set (Upto 4 Amps):-
8
37882
303056
... More
Transportation, installation, testing & commissioning of fuse indication cum monitoring and automatic changeover
8
9469
75752
... More
" Supply of Earth Leakage Detector (12 nos. channel) as per RDSO specification no. 33 RDSO/SPN/256/2002 or latest having 6 digit counter, 12 Channel bus bar voltage of 110 V / 60 V / 12 V in AC DC measurement in 19"" sub rack along with insulation resistance meter, remote indication & buzzer in ASM room at station of Bilaspur/Raipur/Nagpur Division. The tenderer should submit three years warranty certificate along with supply of material. Inspection by RDSO."
2
131577
263154
... More
Transportation, installation, testing & commissioning of Earth Leakage Detector as mentioned above.
2
32894
65788
... More
"Supply Fire Alarm System of Microprocessor based intelligent, addressable, modular, 1 loop (minimum 125 detector/devices per loopexpandable to 2 loops) Fire Alarm Control Panel with LCD display with 320 Character with soft keys for displaying alarm, events and operating functions, Day/ Night operation function, Remote maintenance service feature etc. The panel should be multi-protocol ie able to support at 35 least 2 additional different makes of addressable detectors. The panel should have minimum two relay outputs & 1 Monitored Sounder Output. It should have provision to be connected to repeater panels in future. The panel shall capable to operate on 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 30 minutes during emergency condition as per detailed specifications complete as required. Panel Should Be VdS/UL/ FM/EN/LPCB Certified as per RDSO Specification No. RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer. Annexure:F"
1
83776
83776
... More
Supply of Auto Telephone Dialer (GSM) complying to the RDSO/SPN/217/2016 Ver 1. or latest. Inspection by Rep. of Railway Engineer. Supply of Auto Telephone Dialer (GSM) complying to the RDSO/SPN/217/2016 Ver 1. or latest. Inspection by Rep. of Railway Engineer.
2
9520
19040
... More
Supply of Analogue Addressable Multisensor Detector with multiple sensitivity( adjustable at 37 site) levels , programmable for timed automatic sensitivity selection with base, and other accessories as required and Detectors shall be dS/UL/FM/EN/LPCB listed. The Detectors shall comply to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer.
20
3712
74240
... More
Supply of Manual call points, Push type & resettable with key, with In-built isolator. Shall be VdS/UL/FM/EN/LPCB compliant and shall comply to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer.
2
5712
11424
... More
Supply of Output Module which will provide potential free (NO/NC) contact to existing Data 39 Logger. Complying to the RDSO/SPN/217/2016 Ver 1 or latest. Note:- The contractor will provide potential free contact for goomty and Relay Room only. The connectivity with existing data logger will be done by Railway. Inspection by Rep. of Railway Engineer.
1
8949
8949
... More
Supply of Hooter cum Strobe complying to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway
4
7806
31224
... More
Supply of 2C 1.5 sq mm twisted shielded armoured copper cable. Inspection by Rep. of Railway Engineer.
300
124
37200
... More
Supply of isolator devices for every 20 detectors, complying to the RDSO/SPN/217/2016 Ver 1 or latest. Inspection by Rep. of Railway Engineer.
4
3808
15232
... More
Installation, Testing and commissioning oF above items(35-42) as per requirement at site. The work will execute as per instruction of representative of Railway Engineer.
1
17553
17553
... More
HP/OEM approved document scanner/Printer/Fax A3 /Legal size Resolution in dpi 300,speed in PPM 20, ADF capacity 50, Flate Bed Size NA, Document size legal or latest or similar. Inspection by Rep. of Railway Engineer.
1
72290
72290
... More
Cable Route locator, make- 3M Dynatel, Model no- 2250- U3P3 microprocessor based system or 45 similar for tracing of path ofunderground cables, both copper & fibre optics having specification:- Coupler Size 3.00 Inch; Direct Connect Cable- Large Clips; Number of Frequencies- 4; Operating Temperature Range -20 to 50 Degree Celsius; Storage Temperature -40 to 70 Degree Celsius; Transmitter Output- 3 Watt. Inspection by Rep. of Railway Engineer.
1
367404
367404
... More
Hand Operated Earth tester 4 terminal type with complete testing kit, carrying case and manufacturer calibration test certificate, Nippen make or similar, Range : 0-10 Ohms. Inspection by Rep. of Railway Engineer.
2
7330
14660
... More
Hand Operated Insulation tester with test lead, carrying case and manufacturer calibration test certificate, Nippen make or similar, Range : 100 Volt , 100 M Ohms. Inspection by Rep. of Railway Engineer.
2
6178
12356
... More
Hand Operated Insulation tester with test lead, carrying case and manufacturer calibration test certificate, Nippen make or similar, Range : 500 Volt , 200 M Ohms. Inspection by Rep. of Railway Engineer.
2
6530
13060
... More
Supply of Optical fibre joint closure for straight through joint with modification for 24 fibre OFC as per Specification. No. RDSO/SPN/TC/68/2013 (with latest amendment) complete with all accessories (sealing with mechanical clamp facility) make Raychem or similar. Inspection by RITES.
4
3483
13932
... More
"Supply of Universal thermoshrink jointing kit for derivation/ transformer joint for Jelly filled Six quad cable conforming to RDSO Spec.No :IRS-TC-77/2006(Rev.1) (With latest amendment). Inspection by RDSO."
10
3425
34250
... More
Supply of permenantly lubricated HDPE pipe with outer dia 50mm, inner dia - 42mm thickness - 4mm with suitable couplers, plugs, end caps etc. as per technical specification No. G/CDS-08/01 Dec. 1999. Supply to be made in length of 500 mtrs with + /-10% tolerance. Inspection by RITES.
3
99200
297600
... More
Supply of 4 wire Way-station Control Equipment DTMF type as per IRS Spec. No. : TC 60/2007(with latest amendment) including way station control telephone as per RDSO spec. no.IRS TC 38- 97(latest amendment). Inspection by RDSO.
8
6657
53256
... More
Supply of 12 V. Power supply unit for Telecom. Installation for way-side equipment in 25 KV Electrified area suitable for 6 equipment of DTMF type as per IRS Spec. No : TC 72-97(with latest amendment) including 12V, 7AH maintenance free battery. Inspection by Rep. of Railway Engineer.
2
7456
14912
... More
Supply of following type of Wago Make Terminal block(with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination ofm 0.9mm wire. Inspection by Rep. of Railway Engineer. (b) 20 Pair. Inspection by Rep. of Railway Engineer.
10
2865
28650
... More
Supply of following types of twisted pair PVC switch board cable, conductor of size 0.6mm. dia annealed copper conforming to IRS-TC-24/91 or ITD 1138.(a) 5 pair Inspection by Rep. of Railway Engineer.
300
24
7200
... More
Supply of following types of twisted pair PVC switch board cable, conductor of size 0.6mm. dia annealed copper conforming to IRS-TC-24/91 or ITD 1138.(b) 10 pair Inspection by Rep. of Railway Engineer.
300
39
11700
... More
"(i) Motorola VHF Mobile Synthesized Trans-receiver, Model-GM-339, 146 to 174 MHz frequency range 16 programmable channels, 25 watt RF power out put maximum 2/5 KHz channel specing compact palm 9 microphone, Cable and hang up clip, non locking mounting bracket power cable, limited accessory connectors front facing internal speaker operators handbook mini UHF Male to Female adaptor (Antenna) is not included.. Inspection by RITES. (ii) 1/4 wave VHF rooftop mount mobile whip Antenna with mounting bracket 30 Mtr cable and mini UHF connector. (iii) 3 DB gain VHF roof top mount mobile whip Antenna with mounting bracket 30 Mtr. Cable and mini UHF connector."
1
30222
30222
... More
Supply of managed expandable rack type STM-4, equipped STM-1, ADM S1.1, as per technicalSpecification no. TEC GR NO. GR/SDH-10/02 March 05 (with latest amendment) with 2 Nos.STM-1 aggregate Optical interface upgradable to STM-4, 21 E1s, and minimum 8 Nos. of 10/100 base T Ethernet port, Orderwire, Power supply unit, subrack, DDF, Installation materials, manuals and other accessories . The equipment should be TEC/BSNL/RDSO approved .The equipment should be fully wired for its ultimate capacity and provide redundency for Power supply and Synchronisation. It shall be possible to use the full capacity of the equipment by adding additional tributary cards. The upgradation of STM-1 to STM-4 shall be without change of any internal hardware of the STM equipment. The STM equipment shall have in-built L2 switch for Ethernet ports. Make - Tejas, compatible to existing STM System in the section. Inspection by RDSO.
1
311694
311694
... More
Supply of programmable Primary Digital Drop Insert Multiplexer complete with all accessories from RDSO approved vendor as per RDSO specification IRS TC 68-12 (with latest amendment) including connectors and cables required for installation including 100 pair Krone type MDF. Each channel card shall 11 have minimum four channels per card. The single sub rack shall be capable of being equipped up to min. 60 Channels without additional power supply unit. Specification as per Annexure B. The MUX shall be wired & equipped for 30 channels, with following circuits:- 16 Nos. VF 2W/4W E & M circuits, 8 nos. of 2 wire FXO circuits, 6 Nos. 2W.Subs/Hotline circuits along with ringer card., compatible to existing PUNCOM make MUX. Inspection by RDSO.
2
217922
435844
... More
"Supply of covered 19"" racks (2200MM(H)X600MM(W)X600MM(D).) complete with all fittings for 12 housing the sub-rack SDH ADMs & PD MUXs( as per instsruction of railway ) fully wired including Power Supply Distribution system, rack exhaust fan(48vdc) and other installation accessories for installation. Note : It should have door on both sides with locking arrangement. (Make: APW or RITTAL or similar) Inspection by RITES."
2
62049
124098
... More
Supply of SMPS based battery chargers for telecom use 48 volts, 25 Amps in 1+1 configuration 13 modules of 25 Amps each with automatic switching between the modules as per RDSO Specification no. RDSO/SPN/TL/23/99/V3 (with latest amendment) along with two potential free contacts for monitoring AC/DC failure through EMS. Preferably Amaraja or Statcon make. Inspection by RDSO.
1
135332
135332
... More
Supply of 48 Volt,200 AH maintenance free VRLA batteries duly charged as per specification no.IRS:S-93/96A (with latest amendment). Inspection by RDSO.
1
137067
137067
... More
"Supply of UTP CAT 6 Cable (Roll is 305 Mtr). Make Amp or Molex. Inspection by Rep. of Railway Engineer."
1000
37
37000
... More
Installation ,wiring, Programming, testing (FAT & SAT) and commissioning of EI equipment 2 supplied as per item no.1 above including transportation from consignee depot to site as per original manufacturer's specifications & RDSO specification STE/E/TAN/3012 dt 28.4.2014 or latest and provision of NMS for OFC as per TAN no/STS/E/TAN/3012 under supervision of OEM's Engineer / authorised representative. This also cover the installation of networking of datalogger.
1
625674
625674
... More
Earthing of EI eqipment, relay rack and power equipment etc to be done along with the supply of all requisite materials, earthing shall be in the form of Ring Earth conforming to RDSO spec 3 RDSO/SPN/197/2008 (with a minimum 6 maintenance free earth electrodes) using copper rings with earth resistance less than 1 ohm. The earthing shall be maintenance free. The ring earth shall be connected to copper flat of size 25x3 mm in the relay room and IPS room. The copper flat fixed on the wall to the entire breadth of Relay room and IPS room as an earth bus bar and all earth connections shall be taken from it. A, B ,C & D class protection shall be provided for all EI equipment. 4
1
145808
145808
... More
Training of Railway personnel in installation, commissioning, testing, trouble shooting, repairing, modification & alteration in EI system, including supply of hard copies of course module, etc. at site and OEM's manufacturing/production premises.
20
1275
25500
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., including bailing out water and disposal of extra soil. (i) all soils including soft rocky area. (b) Depth 1.0 Mtr. & width 0.3 Mtr.
4
76590
306360
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., including bailing out water and disposal of extra soil. Hard rocky area including concreting.(a) Chase cutting and smoothening of inside surface of sizes 0.08 m deep and 0.17 m width at platform and cemented floor area.
200
115
23000
... More
"Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., 3 including bailing out water and disposal of extra soil. Hard rocky area including concreting. (b) Cutting the masonary wall to the depth of 0.25m to 0.75m at the entry of room placing of flexible HDPE pipe or G.I.Pipe (including supply) of suitable size as per drawing No. RE/S&T/ALD/SK/161/81."
100
582
58200
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., 4 including bailing out water and disposal of extra soil. (iii) Track crossing, Road Crossing by pushing method (HDD method) at culverts/ track / pucca road crossing at a depth not less than 1 meter with reference to bottom of rail/road surface including supply of HDPE pipe . (a) HDPE pipe/DWC pipe(4 inch dia)
150
1080
162000
... More
"Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., 5 including bailing out water and disposal of extra soil. (iii) Track crossing, Road Crossing by pushing method (HDD method) at culverts/ track / pucca road crossing at a depth not less than 1 meter with reference to bottom of rail/road surface including supply of GI pipe . (b) GI pipe with 76 mm dia, Spec. No. -1239 medium grade (for the length of pushing more than 05 meters)."
50
2246
112300
... More
Laying of Signalling Cable/Power/Quad cable / PIJF cable in the excavated trench to 6 Drg.No:CON/SK/T/5.Transportation, supply of 'U' clamps and anchoring of cable at every 10 Mtrs with 'U' clamp to Drg.No:CSTE/C/Cable/81 including back filling with excavated earth and ramming of trenches after cable laying.
50
16740
837000
... More
Laying of Power cable in the same excavated trench to Drg.No:CON/SK/T/5.Transportation, 7 supply of 'U' clamps and anchoring of cable at every 10 power Meter cable with & 'U' other clamp signalling/quad to Drg.No:CSTE/C/Cable/81. cable in the same Transportation, trench all along supply the trench and (4.5 placement bricks approx of 2nd per class Mtr.) bricks including in the trench back filling length with wise excavated between earth and ramming of trenches after cable laying
2
25526
51052
... More
Laying and Fixing of galvanised iron pipe (GI Pipe) with threaded collars (for jointing pipe) of 80 mm nominal dia Spec.No.IS-1239 medium grade, on bridges, culverts, drains including supply and 8 transportation of GI pipes and all other materials required for fixing the pipe to Drg.No.Con/SK/T/2 and drawing of Signal/Power/Quad cables inside the pipe with masonary works over the entire length of the bridge and at entry and exit of the culvert and curing for 72 hrs, drilling of holes on the pipe at 10 cm apart to be clamped 2 Mtrs apart on culvert, for the Signalling, quad, power cable
150
761
114150
... More
Laying of RCC pipe including supply of required quantity at site with collars (for jointing pipe) 9 150 mm nominal dia to Spec.No:IS-458 in excavated trench and laying of Signalling/ Power cable/PIJF cable/ Quad cables/HDPE pipe through RCC pipe. Power cable shall be laid in the same trench alongwith signalling/Quad cables but in a separate pipe RCC pipe at track/pucca road/ Platform crossing/ level crossing gate etc
200
775
155000
... More
Laying of second class bricks including supply of required quantity at site on single/multiple cable laid in the trench (Approx 9 bricks per mtr).
1.5
32603
48904.5
... More
Shifting of cables in roll with or without wooden drums from other than nominated consignee depot and meggering before loading and after laying, and recording the values in cable insulation register along with representative of Railways.
50
1282
64100
... More
"The excavation of pit, casting of concrete foundationincluding surrounding earthwork along the foundation, erection, installation and wiring of steel apparatus case, fixing of terminals, fuse blocks, signal transformer, current transformer filament switching unit, track battery chargers,adjustable/fixed resistances, chokecoils, Fuses, Relays, Etype locks , termination of cables, cable insertion, wiringtodraw 110V AC therefore in the new apparatus case asrequired, testing, commissioning including subsequentalterations (if required), 12 bunching of cables,earthing ofcable, armours etc. Painting of the apparatus case insideand outsideafter clearing the surface thoroughly and firstcoating of anti -corrosive paint andsubsequent twocoatings of Aluminum paint outside and Red Oxide inside,rubber paint at bottom up to 6 inches and lettering. 18 mm Hylum sheet for location box shelf and 12 mm for cable termination in location box. Steel apparatus case (Large) to Drg. No. CON/SK/T/8with 4Nos. of foundation bolts 20mm x 460mm to Drg. No. SA-112 A/M orlatest.NOTE: - Payment can be released in apart for the above said work after completion of-(i)Foundation- 30%,(ii) Erection - 15% , (iii) Wiring, testing ,painting, sand filling, plastering, earthing & writings etc -45% , (iv)Commissioning - 10% of the rate."
50
17067
853350
... More
Alteration/ Modifications in the existing location boxes, fixing of equipments, cable insertion, termination, wiring, testing & commissioning, two coat painting, lettering to suit the circuits as per approved wiring diagrams. This includes filling with sand and plastering the same
30
2548
76440
... More
Shifting of existing location boxes to facilitate earthwork of Engg./Con. This includes filling with sand and plastering inside location boxes. 15
5
3580
17900
... More
Cement Concrete of proportion 1:3:6 with graded aggregate of size 25mm. and below.
20
2943
58860
... More
"Excavation of earth pit, transportation, placing and fixing of earth electrode with construction 16 of cement encloser to Drg.No.CON/SK/T/9 and CON/SK/T/9A and drawal of GI wire wrapped on MS strip (35 x 6 mm) from earth electrode to all signalling equipments, including fixing and soldering of lugs at both end of the wire. "
70
1941
135870
... More
"Installation of signal posts for Multiple Aspect Colour Light Signals complete with signal units, bases, LED unit, fixing and wiring of current transformers of LED units, ladders & other fittings, excavation of pit, casting of cement concrete foundations with necessary water outlets, erection and fixing of complete 17 fittings of the signal/signal post with necessary earthed screen protection arrangement, including drawing of cable through signal posts, termination of cables, wiring, testing and commissioning, two coat painting and lettering, supply and fixing of speed boards if required for the following:- NOTE:- The foundation for Multiple Aspect Colour Light Signal Post drg. No. Con/SK/T/12 and and the foundation bolts shall be of sizes 24 mm x 915 mm to Drg. No. SA- 116A/M and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA- 110A/M ( 4 nos. for each) with two nuts and two washers each per bolt. (i) 2 ASPECT"
4
17378
69512
... More
"Installation of signal posts for Multiple Aspect Colour Light Signals complete with signal units, bases, LED unit, fixing and wiring of current transformers of LED units, ladders & other fittings, excavation of pit, casting of cement concrete foundations with necessary water outlets, erection and fixing of complete 18 fittings of the signal/signal post with necessary earthed screen protection arrangement, including drawing of cable through signal posts, termination of cables, wiring, testing and commissioning, two coat painting and lettering, supply and fixing of speed boards if required for the following:- NOTE:- The foundation for Multiple Aspect Colour Light Signal Post drg. No. Con/SK/T/12 and and the foundation bolts shall be of sizes 24 mm x 915 mm to Drg. No. SA- 116A/M and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA- 110A/M ( 4 nos. for each) with two nuts and two washers each per bolt. (ii) 3 ASPECT/4 ASPECT"
18
19551
351918
... More
"Fixing of calling-on signals/dependent shunt signals with enameled markers including drawing of cable through the signal post, termination of cables, wiring, fixing of calling- on/dependent shunt signal legend board, LED, two coat painting and lettering, testing and commissioning as required."
10
4629
46290
... More
"Installation, testing and commissioning of Position Light shunt signal (Independent), posts complete with lamps/LED lamps, LED units, Bases and other fittings, excavation of pit, casting of cement concrete foundation, fixing of complete fittings of signal, LED lamps, current regulator including foundation 20 bolts, washers, nuts, termination of cables, wiring, painting and lettering as required. NOTE:- The foundation for position light shunt signal Drg. No. Con/SK/T/13 and bolts for each foundation for above shall be of size 20 mm x 305 mm to Drg. No. SA-110A/M ( 4 nos. for each) with two nuts and two washers each per bolt.Note: Payment can be released in a part for the above said works after completion of.(i) Foundation- 30%,(ii) Errection - 15% , (iii) Wiring, testing, painting,sand filling, plastering, earthing & writings etc - 45% ,(iv) Commissioning - 10% of the rate."
2
3856
7712
... More
Fixing, cable drawing and termination, wiring, painting, lettering, testing and commissioning of Junction type Route 3/4 Way
3
3086
9258
... More
Supply & Erection alongwith casting of foundation of Stop board /Sighting board/SLB/BSLB/legend board as per
2
5094
10188
... More
Supply of retro reflective signal/shunt signal enameled number legend board of size- 300mm X 200mm X 3mm 24
26
308
8008
... More
Installation of retro reflective signal/shunt signal enameled number legend board . 25
26
77
2002
... More
Dismantling of the (ii) Steel apparatus case with fittings.
45
232
10440
... More
"Dismantling of the (iii) Relay racks with all fittings, battery racks complete, Equipment rack complete, SM's slide." 27
15
360
5400
... More
Dismantling of the (iv) Battery charger, Battery set etc.TLBI, DLBI and other Misc. equipments. 28
10
229
2290
... More
Dismantling of the (vii) TLJB/Point JB 29
10
60
600
... More
Dismantling of the (viii) Electric Point Machine 30
8
603
4824
... More
Dismantling of the (ix) Operating cum indication Panel. 31
1
2415
2415
... More
Dismantling of the (x) Location Foundation(By hydraulic breaker) 32
2
1087
2174
... More
Dismantling of the (xi) Signal Foundation(upto ground level by hydraulic breaker).
2
2174
4348
... More
Collecting, stacking with deployment of Man power, Hydra etc for Loading/ Unloading and 33 Transportation of Materials (Fresh/Released/ Unused) from (i) work site to GSD/Raipur, (ii) work site to the stotre of SSE(SIG)/CON, (iii) any store depot to any other store depot over Indian railways as decided by Railway Administation by suitable Trucks and stacking.
4000
38
152000
... More
Installation, testing and commissioning of track circuits as per Drg.No:SK/DRG/OL/27 and track bonding plan including(a) Straight portion of track circuit
17
3832
65144
... More
Installation, testing and commissioning of track circuits as per Drg.No:SK/DRG/OL/27 and track bonding plan including(b) Point and crossing portion of track circuit
5
4209
21045
... More
"Installation (including over hauling) of Electric point machines on MS plate fixed on wooden/PSC sleepers complete with crank handle key Interlocking arrangement as per the drawing approved 36 by Railways, junction boxes (as suggested by the railway) with 1 1⁄2'' dia G.I.pipe /HDPE pipe of required length up to point machine, ground connections, including smithy works involved, insulation of MS plate on which the point machine is to be fixed from the gauge tie plate involving revetting/welding of angle, cleats, termination of cables, wiring, preliminary adjustment for operation of point by crank handle and subsequent final adjustment, painting and lettering as required, testing and commissioning of the same."
8
12859
102872
... More
Installation, Testing and Commissioning of Digital Axle Counter and field training (One man day per set) at site and training to the field staff at site for three days. 38
8
48608
388864
... More
Installation and Fixing of "E" type lock along with Welding Work .
4
704
2816
... More
Deployment of Prokline/ Hydra operation at site for exposing the burried cables or relocation the Location Box/ Signal Post with foundation as per the advice of Railway site engineer.
10
603
6030
... More
Supply of Unskilled labour for immediate restoration of normal traffic by jointing 40 Signalling/Telecom/Power cables of damaged during excavation of earth work of engineering department or for shifting, stacking of stores materials. Unskilled staff will remain available in working hours.(As per letter File No. 1 / 27( 3)/ 2O24-LS-II from office of chief labour commissioner dated 25/09/2024)
30
526
15780
... More
Switching/shifting of working cables conductors from the existing CTR/CRR/Location box to the new CTR/CRR/Location box with parallel patching without interfering the working signalling circuits in presence of Railway engineer at site.
200
24
4800
... More
"Fixing of concrete cable route marker at 30-40 meter and at diversion point including supply & transportation of cable route marker at site. Detail size & fixing of cable route marker should be followed as per drawing no. SDO/Cable laying/020."
150
415
62250
... More
"Deployment of security personnel for guarding of EI installation whenever required as per advice of DyCSTE round the clock, if date of NI/CRS inspection/ opening of line is deffered beyond 30 days from the date of completion of work of the station. (A completion certificate to be submitted to Dy. CSTE/Con/BSP duly signed by site engineer of railway & contractor,, if NI/CRS inspection is deffered beyond 30 days from the date of completion of work of a station)"
-
-
43
... More
Supply, Transportation, fabrication and fixing of Hylum sheet of 12 mm thickness as per site requirement.
20
2525
50500
... More
Small value Engg. items, required if any, to be executed at site as per advise of DyCSTE, shall be paid as per prevailing SOR of Engg. deptt. of SECR at the time of execution.
1
60377
60377
... More
Excavation of trench and clearing of roots of trees, bushes, ballast and reconditioning etc., including bailing out water and disposal of extra soil. (i) all soils including soft rocky area. (a) Depth 1.2 Mtr. & width 0.3 Mtr.
3
92115
276345
... More
Q-series/Composite Relay Racks and cable termination racks (New).NOTE: Payment can be released in a part for the above said work after completion of- (i) Errection- 15%, (ii) Wiring, testing, painting, earthing & writings etc - 75% , . (iii)Commissioning of Relay rack/Composite rack/CTR- 10% of Schedule rate.
7
48363
338541
... More
Alteration of existing Q-series/Composite Relay Racks and cable termination racks.NOTE: 2 Payment can be released in a part for the above said work after completion of- (i) Errection- 15%, (ii) Wiring, testing, painting,earthing & writings etc - 75% , . (iii)Commissioning of Relay rack/Composite rack/CTR- 10% of Schedule rate.
4
19785
79140
... More
Installation and wiring of Rotary key transmitters/KLCR on teak wood board enclosed inside a 3 suitable box with front transparent check cover with locking arrangement. This includes 3/4" thick teak wood boards, transparent sheet for box, locking arrangement. 2 nos.of locks for box and 1 No. lock for front transparent sheet.
7
507
3549
... More
Charging and installation of secondary cell 2 V (lead acid type), and preparation of electrolyte 4 for lead acid cells. If power is not available at site of work, charging may be done at nearby location as per convenience of the Railway. Initial Charging to be done in presence of Rlys representative from executive agency as well as maintenance org, with uninterrupted supply(ii) 2 Volt 80AH
60
310
18600
... More
Installation, cable termination, wiring, testing & commissioning of Integrated power supply panel 5 as per approved power supply diagram and specification. The contactor has to supply arrangements at central relay room, goomties on original tracing paper of size 60cm.x42cm. with 8 computer prints in the format supplied by railways.
1
8876
8876
... More
Installation testing and commissioning of DATA LOGGER as per RDSO's Specn. including 6 networking and central monitoring along with installation of remote monitoring software and hardware. The contractor is also required to list out the no. of analog & digital inputs for wiring & operation of the datalogger by taking approval of the Rly. for those inputs. This includes training to 4 staffs at site. 7
1
12782
12782
... More
Installation testing and commissioning of Disitilled water plant/Demineralised plant. 8
1
3309
3309
... More
Installation, cable termination, wiring, testing of magneto telephones. 9
8
999
7992
... More
Installation, cable termination, testing and commissioning of 10/20/50 Pair CT Boxes.
15
786
11790
... More
"Wiring of door detection Proximity switch to the tag block of dataloggers/RTU (This includes provision of casing and capping and other wiring accessories, excluding 16/0.2 wire which will be supplied by Railways). This includes incorporation of this contact in datalogger simulation & datalogger report."
1
1242
1242
... More
Installation, testing of door contacts and validation and proximity switch data through Dataloggers/RTU. This includes incorporation of this contact in datalogger simulation & datalogger report. 12
1
1242
1242
... More
Development of door 'close and open' software logics module & its implementation.
1
1242
1242
... More
"Provision of simulation arrangement(Track and Point simulation board as well as signal lamp 13 simulation board) and its complete wirinig ; arrangement of free home, advance starters, IBS etc as may berequired with block working with required temporary relay wiring for controlling the train movement in NI - period with the provision of temporary miniature operation cum indication panel board; deputation of fitter round the clock in NI - period for assisting simulation testing for all the routes as per approved RCC by the Railway officials ; mobilization of additional man power for attending to the Pre - NI block and commissioning of the station within prescribed time limit of NI - period as decided by Railway officials; deputation of staff (one fitter & one helper) at the station for attending to the packing and reallignment of point and crossing etc, in connection with P. Way block for a period of 30 days beyond the commissioning date. (a) Station upto 6 lines"
1
372446
372446
... More
"Erection and wiring of equipment rack as per Drg No. CON/SK/T/14 and fixing of 1'' sal wood planks, aluminum ladder with insulated aluminum strips (size 25mmx25mmx5mm)over the equipment racks 14 and upto relay racks with necessary wall cutting and masonary works thereon and placing of all power equipment on equipment rack like switches, transformers, voltage stabilisers, transformer rectifier sets, DC-DC converter on suitable fixed sal wood board; fabrication, supply, installation wiring of 230V AC switchboard, including termination of cables, painting and lettering as required."
1
1765
1765
... More
Design and development of Route Control Chart (RCC) in size B(A3) as per SEM.
50
1004
50200
... More
Design and development of Front Plate Diagram(FPD) conventional/Dual VDU FPD in size W(A1) as per SEM.
1
5024
5024
... More
" Design and development of Station working rule Diagram (SWRD) based on SIP of station in size U(A3) as per SEM." 4
3
5024
15072
... More
Design & development of cable corage plan in size U(A3) as per SEM. 5
1
2511
2511
... More
Design & development of cable route plan in size U(A3) as per SEM. 6
1
1256
1256
... More
Design & development of Track bonding plan in size U(A3) as per SEM.
1
1256
1256
... More
"Design and development of Circuit Diagram/Logic in size B(A3) as per SEM sheet including contact analysis." 8
70
1004
70280
... More
Other Signalling Drawing in size U(A3) as per SEM sheet (wiring in location box) 9
100
1004
100400
... More
Maintenance Register as per Requirement 10
10
125
1250
... More
Miniature diagram in size B(A3) 11
2
1004
2008
... More
Development of SIP based on ESP on size W(A1) 12
1
5024
5024
... More
Photocopy of various drawing in A3 size paper single side.
200
2
400
... More
"Location survey of cable route and preparation of tentative and final cable route plan as per 1 approved format in the section including supply of final route plan after the cables are laid and commissioned indicating clearly the exact position of the cable, joints and other critical items with reference to OHE mast & other fixed point, etc. in 12( twelve) Nos. hard bound copies on white bond paper of maximum A-3 size (well documented and bound with plastic covers)."
5
-
4750
... More
"Transportation, loading/unloading of OFC from the stores of railway to the work site with care, pushing/pulling OFC through the HDPE pipes, sealing of the duct by sealling /caps plugs. The cable is to be laid 2 by mechanised means. At inaccessible places where mechanised laying is not possible, the cable is to be laid manually by pulling through pre inserted rope. This also includes testing of cable drums in the store premises before transportation and submissions of results thereof. Empty cable drums to be returned by the contractor. The cable drums with unused cable at site to be returned by the contractor to the stores depot of SSE/S&T/Con/PROJ/BSP/G/NGP"
3
18672
56016
... More
Supply and placing of warning tape Orange colour of 100 mm wide printed in black as "CAUTION OFC CABLE" at every 1 mtr. interval (minimum) and to be laid in the trench in station area and as directed by the representative of Railway.
2
14419
28838
... More
Supply and placing of warning tape Orange colour of 100 mm wide printed in black as "CAUTION OFC CABLE" at every 1 mtr. interval (minimum) and to be laid in the trench in station area and as directed by the representative of Railway.
2
14419
28838
... More
Transportation, installation of optical fibre joint closure and splicing of Optical fibre cable (2 x 24 fibres) and testing, Optical fibre cable splicing shall be done in the presence of Railway's representative. Only 5 joint closure shall issued by the Railway. All other tools/test equipments required shall be arranged by the Contractor. This also includes excavation of earth for construction of masonary pit of bricks (inside complete plastered), the inner size of pit 1.2m x 1.2m (depth 0.75m) in all types of soils for keeping cable coils at the location of OFC joints, filling the pit with sand after jointing of cables, ramming and covering with RCC slab as per Drg. and instructions of site in charge of Railway.
4
19019
76076
... More
"Transportation, installation of Optical Fibre termination box/FDMS and splicing of Optic Fibre 6 Cable (24 fibre) inside the termination box/FDMS with provision of taking out fibre of OFC as required. This includes supply of installation accesories (as required) as detailed in technical specification and advised by Railway's Engineer-at-site.This also includes End to End testing of all fibres of the optical fibre cable terminated between cable hut to cable hut of each station."
4
21705
86820
... More
Transportation & Execution of following kinds of joints on Quad Cable using thermoshrink jointing kit. This also includes. straight through joint on Quad cable/10-20-50 pairs PIJF Cable
10
1385
13850
... More
Provision of Earthing protection arrangement as per RDSO drawing no. TCA 565 (Adv.). All the materials including earth electrodes required for the work to be supplied by the contractor.
1
8680
8680
... More
Transportation, Wiring and installation of magneto telephone at L.C.Gate/pump house or the places as advised by the site incharge.This includes supply and fixing of Telephone rack of approved design by the contractor.
4
990
3960
... More
Transportation, installation, testing & commissioning of 4W way station equipment DTMF type 10 and way station 4W control telephone including termination of the electric wires, battery wires, switch board cable on the equipment. The termination shall be done using eyelets of required size. The way station equipments shall be fixed over the wall on board of approved design. Board and all the materials required for fixing and termination to be supplied by the contractor.
8
480
3840
... More
Transportation, installation and commissioning of 12V. Power supply unit for telecom installations at wayside stations on wall mounting stand of approved design including termination of Power supply cable all other materials required for fixing and termination to be supplied by the contractor.
2
480
960
... More
Transportation, Installation & commissioning of SDH ADM, Primary D/I MUX with all accessories and power supply, racks, runway ladder etc. in cable huts including wiring of all the equipments up to C.T. Box 12 install for Outdoor/ Derivation cables as per the requirement at each station. Note:- The work involves fixing of 19" rack,Installation & wiring of equipment connecting to 48 V. bus bar including supply of all wires and connectors. The equipment shall be mounted in shelves of standard 19" racks. All 21 E1 streams shall be suitably terminated on Digital Distribution Frame. All the wiring shall be done in accordance with wiring instructions given in as per Annexure-B.
2
44126
88252
... More
Supply, Installation and commissioning of Surge & Lightning protection arrangement in the cable huts for all the equipments including all the circuits derived from MUX at the stations and Ring Earth (Six Earth pits). Each earth shall be as per RDSO Specification No.RDSO/SPN/197/2008 (drawings enclosed)
1
49643
49643
... More
Installation, Testing commissioning of Double faced GPS based Digital platform Clock along with all accessories this included all type of material required for installation of the clock will be supplied by the contractor (Iron clamp. GI Pipe, Nut and Bolt Etc.)" [vide item no 55 of SCH A].
1
6830
6830
... More
Supply and fixing of PVC casing caping 25mm x 25mm size for indoor wiring. This includes drawal of wires in the casing caping and termination of wire at end point. The work should be carried out as per the instruction of Railway site Engineer.
500
43
21500
... More
Excavation of trench in all kinds of soils including soft rocky area and clearing of roots of trees, bushes, rocks, ballast etc., to a depth of 1 Mtr. & width 0.3M for track/pucca road/ Platform crossing/ level 1 crossing and any other place as advised by the Engineer- in-charge including supply, transportation and laying of RCC pipe with collars (for jointing pipe) 150mm nominal dia to Spec.No:IS-458 in trench and drawing of Signalling/ Power/ Quad cables through pipe including back filling and ramming after cable laying as specified in Technical Circular No.2 of 1988 issued by CSTE/S.E.Rly. This includes repairing and plastering of platform/pucca road after cable laying. RCC pipe shall be inspected by the Rep.of Sr. DSTE /PROJ before laying. NOTE:-Power cable, signalling cable, Quad cable as mentioned above, where required shall be laid in the same trench as signalling cable but in a separate pipe.
1000
1008
1008800
... More
Excavation of trenches including clearing of roots of trees etc. in hard rocky soil by chiseling up to a depth of 0.5m to 0.8 Mtr. At the bottom, supply and placing half round RCC pipe on sieved soil of 30 mm 2 over cable and concreting throughout the lenght upto a layerof 75 mm approximately (1:2:4) , as advised by the site engineer & Guide lines on Signalling cable Laying issued by Signal Directorate Research,Design & Standards organisation Ministry of Railways Manak Nagar Lucknow- 226011, Version- 1.0, Effective from dt 31.10.2011 . Then digging and backfilling the trench by digging and carrying earth from a lead of maximum 30Mtrs and then ramming the soil after cable laying. This includes supply of half round RCC pipe.
200
372
74400
... More
Design & Preparation of SWR & GWR in English & Hindi for execution to be made by the 3 contractor as per SECRly practice in conformity with GR, SR & SEM provisions and in accordance with CSTE/OL/GRC's circular No.3 of 1984 with the latest alterations & amendments based on IP (tentative/approved) (to be supplied by the Rlys.)
1
8197
8197.6
... More
Relay, Non AC Immune, plug-in type, Style 'QTA2; Neutral track, 9 ohm, 2F.1B contacts, front 4 and back contacts metal to carbon, complete with plugboard, retaining clip and connectors conforming to BRS:939A,BRS:966 (Appendix F2), IRS:S 34 & IRS:S 23. The interlocking code for this unit shall be FGHKX. Inspection by RDSO.
10
3473
34739.2
... More
"Relay, AC immune, Plug-in type, style QBCA 1, DC biased point contactor, 24 V, 2F (HD). 4B 5 contacts,front contacts (Heavy Duty) and back contacts metal to carbon complete with plug board, retaining clip and connectors conforming to BRS: 943, IRS: S34 & IRS: S 23-(as applicable). The interlocking code for this unit shall be BCEJK. Make/Brand - QBCA1"
10
7080
70800
... More
Supply of indicating type 0.6A fuse inserts with holder (material will be supplied only from approved vendor of RDSO) as per IRS spec. IRS:s:78/92 or latest. INSPECTION BY REP. OF RAILWAY ENGINEER
100
63
6300
... More
Arrangement for commissioning of station for the work of non interlocking period at site such as provision of Two Tent ,Four Table,Chair(8 no. in each Tent) in general.Drinking water and other amenity,Cap Umbrella Torch for 30 staff ,Hand gloves for 6-8 staff and arrangement of one vehicle at each station for the 7 work of NI period for required commissioning of station for the work of non interlocking period at site. lighting arrangements in tent, in the yard over point zone for proper working in the evening & night as required. If necessary, DG has to be arranged by the contractor on his own cost including diesel, lubricant oil etc. Necessary should be done as advised by site engineer. Note: The unit of this item should be treat as "Per Day for NI work" instead of Day.
2
31860
63720
... More
Supply of the Plain Storage Almirah, Model no.-STSTW000 (Large)or latest. Make:Godrej for S M / relay room.Inspection by Rep. of Railway Engineer.
2
22140
44280
... More
"Supply of the following furnitures for SM / relay room. Chair . Model PCH-7003. Make: Godrej. Inspection by Rep. of Railway Engineer." 10
8
8053
64424
... More
Supply, fabrication & erection of structural bond made of mild steel flat 40x6mm size. 11
8
216
1735.2
... More
Supply, fabrication and erection of longitudinal bond made of mild steel flat 40x6mm size. 12
8
177
1416
... More
Supply, fabrication and erection of transverse bonds made of mild steel flat 40x6mm size.
5
492
2460
... More
Supply of supervisory console (PC, Make: HP/Samsung/Dell & printer) with one set of table and chair for datalogger/RTU for online tracking and monitoring of station position as per Annexure-D. Inspection by Rep. of Railway Engineer.
1
79535
79535
... More
Cable PVC insulated single core unsheathed with plain annealed copper conductor as per the colour coding scheme of Railways. Spec. no: IRS-S-76/89 with latest amendment. Multi strand ISI copper cable (6 Sq.mm).Inspection by Rep. of Railway Engineer.
1
32385
32385
... More
Supply o f F i r e extinguisher C O 2 t y p e (capacity minimum 4 . 5 K g o r more ) w i t h ISI marked.Inspection by Rep. of Railway Engineer.
2
5029
10058
... More
Supply of flex printing for different type of station yard etc.Inspection by Rep. of Railway Engineer.
-
-
16
... More
Supply of workspace make new modular control desk or similar for 2 monitors(minimum 54" or higher size), 2 operators and 1 module will be provided for storage make in SLAT system with side drawer. (i)Desktop made of 12 mm ASS + 25 MM MDF with properties like - high scratch resistances, seamless joint, flammability class A, non-porous, (ii) structure- powder coated alluminium sturdy structure and extreme side 17 aesthetic legs, (iii) shutter- 18 mm MDF, (iv) proper cooling arrangement for CPU cabinet, (v) side out CPU tray, (vi) ergonomic design considering proper leg space, (vii) all electrical components as shown in drawing, other details shall be executed as advised by Railway representative. (A tentative sketch is enclosed at Annexure- H,however actual drawing shall be supplied as per site requirement. This also includes Transportation, installation, testing & commissioning of workspace make new modular control desk as mentioned above.Inspection by Rep. of Railway Engineer.
1
494252
494252
... More
Supply, Installation, Testing & commissioning of Resettable Analogue Type Linear Heat Sensing (LHS) Cable complying to RDSO/SPN/217/2019 Ver-3 or latest. Inspection by representative of railway engineer.
50
1414
70700
... More
Supply, Installation, Testing & commissioning of Resettable Analogue Type Linear Heat Sensing (LHS) Cable Interface Module with all accessories for single Strech complying to RDSO/SPN/217/2019 Ver-3 or latest. Inspection by RDSO.
1
134184
134184
1
6953844
6953844
... More
Supply of 24F fully loaded FMS suitable for Railway's OFC System Complete with 24 nos.0db adaptor and 24 nos. 1mlength Pigtails and 6 nos. 1m Pigtail on spare. All are "SC" type connectors. Inspection byrepresentative of Railway Engineer.
4
9440
37760
... More
Supply of Optical fibre Patchcords with SC-SC or suitable connectors on both ends as per site 2 requirement for interconnection between FMS and Optical Modem length 10 Mtrs. Each as per TEC Specification No. G/OFJ-01/03JUN 99 (With latest amendment). Max Permissible loss-0.2dB. Inspection by Rep.of Railway Engineer.
10
1232
12320
... More
Supply and Installation of 19" 9U Rack Wall/Pole Mount ,with all accessories Like Electrical fitting, Fan Tray, Patch Panel, Cable Manager, PDU . [Detailed Specification in Technical Document] Inspection : RITES
2
10826
21653.52
... More
Supply of PA Amplifier make Ahuja SSB-120 or smilar as per following spec.:power out put: 120W 4 RMS at 10%TIID/160W Rms Max.; Input Channels:Mic: 5XMic 0.65 mVolt/4.7K;Aux::2X aux100m Volt/470K; freq.Resp.: 50-15000Hz±3db.; Tone cnl. Bass: -10dB at100HZ; Treble: -10dB at 10KHz; SpeakerO/P: 4,8,16,70 Volt & 100Volt. ; Dim/Wt.W420x H135x d295mm/11.3Kg. ispectionby Reperentative of CSTE/Con/BSP.
1
10847
10847
... More
Supply of PA Microphone make AhujaASM-580LXR or similar as per followingspec.Freq.Resp.: 50- 16000Hz;Sensitivity:2mV/Pa;Impedence: 300.; Supplied withquick detachable holder with 3 Pinprofessional XLR connector & 10 Mtrs.Twin core shielded low noisecable.Inspection by Reperentative ofCSTE/Con/BSP.
1
2234
2234
... More
Supply of PA Column Speaker makeAhuja ASC-320T or similar as perfollowing spec.: Input Power:20W RMS;30W Max; Power Taps: 20/15/10/5W;:Imp/Volt:100V.; Freq.Resp.150-15000Hz.; PL(1W/1m): 93dB; Sp.size:4x5"x3"; Dim:W115xH658xD89mm.;Wt.:3.39kgVRLA batteries
2
2794
5588
... More
Supply of a) 24 Volts E1 Extender at thedata logger end and b) 48 Volts E1Extender at the OFC as per Specification:A4. Inspection by Rep. of Railway Engineer
1
44000
44000
... More
Supply, Installation, configuration, Testing and commissioning of 24 port 10/100/1000 Mbps layer 2 Managed switch. Inspection by Rep.of Railway Engineer
1
32000
32000
... More
Supply of VRLA batteries 12V, 150AH
1
12250
12250
... More
Supply and transportation of PA screen cable roll at site (Roll 50 M each). Inspection by Rep. of railway engineer.
10
2963
29630
... More
Supply, transportation, installation and commissioning of 2 Mbps LAN extender with all accessories 10/100 base t, port RJ-45 12
2
17550
35100
... More
Supply & fixing of 42U rack 600WX800D, Steel Heavy Duty Networking rack.
1
28633
28633
... More
Supply, transportation, installation and commissioning of MAPLE-4C chassis (1U) Integrated Access TDM Multiplexer with 04 port E1 main link and three empty slots.
4
32300
129200
... More
Supply of Optical power meter (wave length, 1310 nm & 1550 nm user selctable, measuring range + 3dBm t0 -60 dBm as per technical specification no. GR/OPM 01/03 Jan 2005. (Type B)or latest specification. Inspection by representative of railway). 15
1
25060
25060
... More
VRLA battery 12V, 42 AH suitable for 25 watt VHF set.
1
6000
6000
... More
"Supply and installation of on-line, line interactive 1 KVA UPS battery backup of 60minutes. Make:APC/Uniline/Amararaja." 17
1
34919
34919
... More
Supply of Horn speaker 40 watt with clamp for hanging 18
4
1607
6429.6
... More
Transportation and installation of audio mike with stand.
1
753
753
... More
Provision of Power Supply from main power bord to Amplifier with proper wirining using standard power cables and male female pin sockets of ISI certified make as per site condition. 20
1
1160
1160
... More
Testing and commissioning of the complete PA System.
1
1198
1198
... More
Tracing & testing of exisiting cables (OFC & 6 Quad ) for identification of faulty location with the deployment of LABOUR for digging pits, OTDR Tools, like megger,cable fualt,locator ,cable route tracer, OFC splicing Machine supported.
2
5000
10000
... More
Transportation, Installation, testing commissioning of 25 Watt VHF set, antenna on roof with the help of GI pipe and clamp.
1
1963
1963
... More
Supply of Data Concentrator with dual modem and Media converter interface asper technical specification A5 (Annexure -I). Inspection By rep. of DY.CSTE/PROJ II/BSP
2
140000
280000
... More
Supply of Dual Media Converter for Data Logger as per technical specification A6(Annexure - J).Inspection By rep. of DY.CSTE/PROJ II/BSP
2
40000
80000
... More
Supply of Dual Media Converter for Data Concentrator as per technical specification A7 (Annexure -K).Inspection By rep. of DY.CSTE/PROJ II/BSP 26
2
40000
80000
... More
Installation, Testing & commissioning of the Data concentrator
2
30000
60000
... More
Supply of Double faced GPS based Digital platform Clock red/White colour display along with accessories as per RDSO Specification No. RDSO/SPN/TC/ 62/2008 Rev. 3.0 or latest. Inspection by RDSO 28
1
67509
67509
... More
Installation, Testing & commissioning of Dual Media Converter.
4
40000
160000
... More
supply of Under Ground Railway Signaling Cable Unscreened, PVC insulated, PVC inner 1 sheathed,armoured and PVC outer jacket with high conductivity annealed Copper conductor, Size : 6 core X 1.5 sq. mmconforming to RDSO specification No. IRS: S-63/2014 [Rev.4.0] with latest amendments,to store ofSSE/Signal/Project/GSU /Store/BSP. Inspection by RDSO
4
125337
501348
... More
Supplyn of Under Ground Railway Signaling Cable Unscreened, PVC insulated, PVC inner sheathed, armoured and PVC outer jacket with high conductivity annealed Copper conductor, Size : 12 core X 1.5 sq. mmconforming to RDSO specification No. IRS: S-63/2014 [Rev.4.0] with latest amendments,to store of SSE/Signal/Project/GSU/ Store/BSP. Inspection by RDSO
-
-
2
... More
Supply of Underground Jelly Filled Quad Cable for Signaling and Telecom Installation Size : 6 Quad x0.9 mm dia as per RDSO specification No. IRS: TC-30/2005 (Ver. 1) with amendment No.1 to 5 or latest amendment, tostore of SSE/Signal/Project/GSU /Store/BSP.Inspection by RDSO
7
284238
1989666
... More
Supply of 24 Fiber armoured Optical Fiber Cable to RDSO Specification No.: IRS:TC:55/2006, Rev1(Amdt. 1.1, 2.0 & 3.0),to store of SSE/Tele/Project/GSU /Store/BSP. Inspection by RDSO
3
51790
155370
... More
Supply of Cable PVC insulated heavy duty armoured unscreened Power Cable 2 core x 70 sq.mmaluminum conductor as per Specification No. IRS: S-63/2014 and IS: 1554 {Part-I] (Rev.4.0] with latest amendm ent,to store of SSE/Signal/Project/GSU /Store/BSP. Inspection by RDSO
2
188087
376174
... More
Supply of Underground polythene insulated polythene sheathed jelly filled telephone cable 20 pair withpoly-AL moisture barrier 0.63mm dia as per specification No. IRS-TC-41/97 Amdt.1 to 3,to store ofSSE/Signal/Project/GSU/Store/BSP.Inspection by RDSO
1
156940
156940
... More
RED Aspect LED Signal Lamp for main colour light signal, retrofittable in existingCLS housing with integrated CRU and compatible with AC LED ECR as per RDSOSpec. No. RDSO/SPN/199/2010 Revision: 1.0orlatest. Inspection by RDSO.
24
8850
212400
... More
Yellow Aspect LED Signal Lamp for main colour light signal, retrofittable inexisting CLS housingwithintegrated CRU and compatible with AC LED ECR asper RDSO Spec. No. RDSO/SPN/199/2010 Revision: 1.0orlatest. Inspection byRDSO.
28
8850
247800
... More
Green Aspect LED signal Lamp for main colour light signal, retrofitable in existing CLS housing with integrated CRU and compatible with AC LED ECR as per RDSO spec. No. RDSO/SPN/199/2010 Revision: 1.0orlatest.Inspection by RDSO.
22
10030
220660
... More
Calling on LED Signal Lighting Unit 110V AC, retrofittable in existing CLS housing and compatible with AC LED ECR as per RDSO Spec. No. RDSO/SPN/153/2011 Revision: 4.1 or latest. Inspection by RDSO.
8
6829
54632
... More
Shunt LED Signal Lighting Unit 110V AC, retrofittable in existing CLS housing andcompatible with ACLEDECR as per RDSO Spec. No. RDSO/SPN/153/2011 Revision: 4.1 or latest. Inspection by RDSO.
15
5758
86370
... More
Route LED Signal Lighting Unit 110V AC, retrofittable in existing CLS housingand compatible with ACL LED ECR as per RDSO Spec. No. RDSO/SPN/153/2011 Revision: 4.1 or latest. Inspection by RDSO.
24
5605
134520
... More
Supply, transportation, installation, testing & commissioning of Integrated Power Supply for Distributed EI in RE area as per RDSO Specification No.RDSO/SPN/165/2012 (Rev. 3.0) or latest with low 13 maintenance secondary cell(110V,200AH x 2) asper specification No. IRS: S-88/2004 without wooden stand for battery. Capacity of different modules and secondary cell should be as per SECR Drawing No. Typical/69/2020(enclosed). Supervision, Installation and commissioning as per RDSO guidelines letter No. STS/E/IPS/Gen, dt. 01.04.2008or latest. Inspection by RDSO.
1
1297279
1297279.9
... More
"Supply of Crosslinked Polyethylene Insulated PVC Sheathed Armoured Cable 4x50mm (4core50qmm) with Aluminium conductor, Insulation grade: C1-FR suitable for rated voltage at 1100 volts grade, outer sheath -PVC ST2 as per IS:7098 (Part 1): 1988 latest "
400
809
323640
... More
Supply of Crosslinked Polyethylene Insulated PVC Sheathed Armoured Cable 2x70mm (4core50gmm) with Aluminium conductor, Insulation grade: C1-FR suitable for rated voltage at 1100 volts grade, outer sheath PVC ST2 as per IS:7098 (Part 1): 1988 latest.
400
646
258760
... More
"Supply of Crosslinked Polyethylene Insulated PVC Sheathed Armoured Cable 2x185mm (2core185qmm) with Aluminium conductor, Insulation grade: C1-FR suitable for rated. voltage at 1100 volts grade, outer sheath-PVC ST2 as per IS:7098 (Part 1): 1988 " 4
400
1417
567000
... More
fixing of LED based flood light fitting 5
2
525
1050
... More
Rate of laying of cable in open air with proper fixing arrangement in supporting structure
450
38
17100
... More
Supply of 20W LED 4' tube light fitting with tube and all its standard accessories. Inspection by Rep. of Railway Engineer.
70
510
35700
... More
"Supply of OW LED retrofit lamp B22 holder base with polycarbonate body. nt wiring for fans/exhaust fans/lights etc. " 8
32
100
3206.72
... More
Fixing of LED tube light, bulkhead, fitting
70
13
910
... More
Supply of electric fan with BLDC motor, 1200 mm sweep, 26-28 watt, 5 star rating with remote having 2years warranty. Inspection by Rep. of Railway Engineer 10
16
2124
33984
... More
Fixing & connecting of ceiling fan.
16
15
240
... More
Supply of exhaust fan of 300 mm sweep complete with heavy duty gravity flap (self open & close shutter) and all accessories to work on 230 Volts AC supply. (Crompton, Usha, Bajaj, Havells, Khaitan, Anchor or Surya make. Inspection by Rep. of Railway Engineer. 12
7
1694
11858
... More
Fixing & connecting of exhaust fan.
7
27
189
... More
Concealed wiring for lights, exhaust & fans with modular type switches : Concealed wiring with modular type switches 1.5 s q m m single core flexible FRLS copper wire a s per representative o f Railway Engineer.
100
460
46000
... More
Supply o f 18W(APPROX) LED based cool white street light type fitting . Inspection by Rep. of Railway Engineer. 15
2
1197
2394
... More
Fixing of street light type fitting with all acceseries.
2
311
622
... More
Supply of street light junction box 150x150x120 mm size with 1 no. 6A HRC fuse with base and 1 no. TPN terminal block stud type suitable for 25sqmm cable. Inspection by Rep. of Railway Engineer. 17
1
861
861
... More
Fixing & connection of street light junction box
1
129
129
... More
Supply of 5 pin modular socket outlet with switch of 6 Amps capacity & 250V grade complete with accessories. (ABB, Havells, Wipro, Anchor, HPL or any other make that confirms to respective IS). 230V. Inspection by Rep. of Railway Engineer.
20
164
3280
... More
Supply of 5 pin modular socket outlet with switch of 16/6 Amps capacity & 250V grade complete with accessories. (ABB, Havells, Wipro, Anchor, HPL or any other make that confirms to respective IS). Inspection by Rep. of Railway Engineer. 20
20
251
5020
... More
Fixing & connecting of socket outlet with switch of 5 pin, 16/6 Amp capacity & 250 volts
40
13
520
... More
Concealed Wiring for 6/16Amps plug points with Modular board with PVC insulated copper conductor 2.5 sq.mm. size with supply of all materials.
20
565
11300
... More
Concealed Wiring for Sub-circuits or similar wiring as per direction of Railway engineer. 23
-
-
22
... More
Supply of MCB -16A D.P.9KA. with metallic housing. Inspection by Rep. of Railway Engineer.
10
546
5460
... More
Supply of DP MCB 32 A MCB complete with sheet steel enclosure , powder painted. Inspection by Rep. of Railway Engineer. 25
24
720
17280
... More
Erection, testing & commissioning of MCB 16A/32A, DP complete with its metallic enclosure.
34
52
1768
... More
Supply of MS distribution box of size 200 x 200 x 120 mm with 2 Nos suitable size aluminium busbar arrangement of 100 Amps capacity. Inspection by Rep. of Railway Engineer. 27
1
1485
1485
... More
Fixing & Installation of MS distribution box. 28
1
187
187
... More
Supply of JB of 200 x 150 x 80 mm with Hylam sheet.Inspection by Rep. of Railway Engineer. 29
2
867
1734
... More
Fixing of Junction Box.
2
85
170
... More
supply o f wall mounted 4 way metallic sub-distribution board with 04 Nos 250V,16A SP MCB, busbar, neutral and earthing arrangement etc. Inspection by Rep. of Railway Engineer. 31
2
1434
2868
... More
Erection of Metallic distribution board.
2
61
122
... More
Plug and socket with mcb 20A metal clad box with metal plug and top. Inspection by Rep. of Railway Engineer.
2
1265
2530
... More
Concealed wiring for 20 Amps plug points with PVC pipe & PVC insulator copper conductor 4sqmm size with supply of all material.
2
851
1702
... More
Supply of Autochangeover panel for colour light signalling supply of 63 Amp as per RDSO specn. PI/SPC/PSI/CLS/0021 including 'A' & 'C' sheet no . 1 . Matrix make o r similar Inspection b y Rep. o f Railway Engineer.
1
35700
35700
... More
Installation, cable termination, wiring, testing and commissioning of Auto Changeover panel. (Tender No: 71-SNT-Proj-Tender-2024 Item no Schedule 17 item no12)
1
6208
6208
... More
Supply of 2.0 Tonne Split AC, Inverter type, 5 star with accessories & transportation .Inspection by Rep.of Railway Engineer.
2
53000
106000
... More
Supply of Heavy Duty AC Stand/Heavy Duty Air Conditioner Outdoor Unit Mounting Bracket. Inspectionby Rep. of Railway Engineer
2
499
998
... More
Installation &commissioning of split type Air Conditioners OR dismantling of Air conditioner as per instruction by railway engineer
2
1887
3774
... More
Fixing of Heavy Duty AC Stand/Heavy Duty Air Conditioner Outdoor Unit Mounting Bracket as per details described under 40
2
50
100
... More
supply and fixing of timer control panel
2
65000
130000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%