Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Opening Date16 Aug 2024
Closing Date5 Sep 2024
Tender Amount₹ 25,00,000
Costs
EMD
₹ 18,750Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
157230Bid Award Id
ViewTender No
157230Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.cg.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
In ordinary rocks.
2.6
694
267
Extra for every additional lift of 1.5 m or part thereof.
-
-
-
All types of soils
5.2
138
26.5
Ordinary or hard rocks
4.2
200
47.5
Extra rate for quantity of work executed in or under water and/ or liquid mud including pumping out water.
450
22950
51
Extra rate for quantity of work executed in or under foul condition.
398
17512
44
Extra rate for lead for every 50m lead or part thereof and upto 150 m beyond 50 m free lead and 1.5 m free lift by manual means only.
-
-
-
For Soils
8.4
277
33
For Rocks.
12.4
614
49.5
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
2.4
156
65
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
3.6
1336
371
Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified.
30
6240
208
Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for post - constructional ani-termite treatment (excluding cost of chemical emulsion):
-
-
-
Along external wall where the apron is not provided using diluted chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:
36
328
9.1
Along external wall below concrete or masonry apron along the plinth wall using diluted chemical emulsion @ 0.65 litres per hole including drilling 12mmdia holes 300mm apart and plugging the same with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing apron after injecting chemical emulsion.
20
300
15
Treatment of masonry wall/ soil under existing floors using diluted chemical emulsion @ one litre per hole, including drilling 12 mm diameter holes at the junction of floor and walls along the cracks on the floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
24
252
10.5
Diluting chemical emulsion (chlorpyrifos/ lindane) in oil or kerosene based solution as per manufacturers recommendation and injecting the diluted chemical emulsion for post - constructional anti-termite treatment of wood work at points of contact @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
22
2596
118
Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor)
-
-
-
Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm
5.8
160
27.5
Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
12
228
19
Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
8
108
13.5
Carriage by mechanical transport upto 5 km lead:
-
-
-
Earth
2.2
244
111
Sludge
3.8
338
89
Dismantled Building debris (Mulba)
2.4
220
91.5
Extra for mechanical transport for every one km or part thereof beyond first 5 km lead.
-
-
-
Earth
30
270
9
Sludge
18
130
7.2
Dismantled Building debris (Mulba)
22
198
9
(2) FORM WORK
-
-
-
Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
-
-
-
Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
12.2
1696
139
Wall of any thickness including attached pilasters, buttresses etc. in super structure.
5.8
1322
228
Window sills, anchor blocks, string course, bends, copings, bed plates and like.
10.8
1987
184
Edge of slab, breaks in floor and walls upto 200mm.
16
544
34
Columns, Pillars, Piers and likes- rectangular or square in shape
6.4
1901
297
Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes
3.8
1353
356
Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)
10.2
2397
235
Beams, lintels, cantilevers & walls
2.2
444
202
Vertical and horizontal fins individually or forming box, louvers bands, almirah shelves and likes.
1.8
605
336
Folded plates slabs
3.6
698
194
Arches, domes and likes, upto 6 M. Span.
7.2
4205
584
Arches, domes and likes, exceeding 6 M. span
2.8
2492
890
Weather shade, chhajja, Cornices and mouldings
2.2
647
294
Spiral / folded plate type stair cases including risers and landings
0.8
246
307
Stair cases of all types excluding spiral and folded plate type, including risers and landings
4
920
230
Coffer/ waffle/ Grid slab of any size or shape. Note: (1) Any grid box of area less than 1 sqm will only be paid in this item. (2) Only plan area is to be measured and paid and grid beams or fins will not be paid separately.
2.6
1326
510
Extra for additional height every 1m or part thereof where height of staging for form work exceeds 4.0 metre with adequate bracing, propping etc at all levels, for suspended floor, roof, landing, beam and balcony. (only plan area is to be measured):
13.6
551
40.5
Extra for providing fixing and removing of propping from lower floor upwards for the concreting. Propping should be provided two floors below. The props of lower floor must be 50% of the props of the floor above including wedging etc. complete. In case propping is done in one floor below, only half the rate shall be paid.
19.4
330
17
Extra for unsupported individual columns with height more than 4.0 m from the immediate lower level in every floor. (full area of column is to be paid)
22.4
661
29.5
(3) CEMENT CONCRETE (PLAIN AND REINFORCED)
-
-
-
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
-
-
-
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).
2
4818
2409
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
1.4
3723
2659
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
1.2
3564
2970
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).
3.6
12787
3552
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).
1.6
6517
4073
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
(Note :Excess/ less cement used as per design mix is payable/ recoverable separately)
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).
1.24
5162
4163
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.
-
-
-
M-20 Grade
1
4231
4231
M-25 Grade
0.8
3438
4298
M-30 Grade
0.9
3926
4362
M-35 Grade
1
4426
4426
M-40 Grade
0.4
1796
4490
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
4.6
449
97.5
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
2
938
469
Extra for laying PCC/ RCC, in or under water or liquid mud including cost of pumping or bailing out of water and removing slush etc. complete:
6
1566
261
Extra for laying PCC/ RCC, in or under foul conditions.
1
97
97
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:
-
-
-
Thermo-Mechanically treated bars FE 415
1
55
54.5
Thermo-Mechanically treated bars FE 500D
1
55
54.5
Thermo-Mechanically treated bars FE 550D
1
55
55
Cold twisted bar / Hot rolled deformed steel
1
54
53.5
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work.
1
4237
4237
Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer.
6.2
270
43.5
Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
3.2
299
93.5
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.
2.3
628
273
(4) WATER PROOFING
-
-
-
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures using rough Kota stone and consisting of: i) 1st layer of 22mm to 25mm thick approved rough Kota stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound. iii) Finishing top with stone aggregate of 10mm to 12mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
5.2
3494
672
Providing and laying integral cement based treatment for water proofing on the vertical surface at all levels by fixing 22 mm to 25mm thick rough Kota stone slab with cement slurry mixed with water proofing compound conforming to IS:2645 with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) with neat cement punning mixed with water proofing compound complete.
3.1
2229
719
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of: i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 including rounding off junction of vertical and horizontal surface. ii) 2nd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound including rounding off junction of vertical and horizontal surface. iii) 3rd course of applying blown or residual bitumen applied hot @ 1.7 Kg. per sqm of area. iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg. per sqm of area.
4.2
1869
445
Providing and laying water proofing treatment in sunken portion of WCs, bathroom, kitchen etc., by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation: i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1.2
218
182
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation: i) 1st layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. ii) 2nd layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. iii) 3rdlayer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with coarse sand @ 1.289 kg/sqm and water proofing cement compound @ 0.07 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. iv) 4th and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
2.1
594
283
Providing post water proofing treatment against dampness & Seepage in walls of basement, plinth, super structure (horizontal or vertical) consisting of following operations: i) Removing loose material and cleaning the surface. ii) Drilling 20mm dia holes in walls/ floor in zigzag manner spacing not more than 150 mm center to center. iii) Injecting polymer based high strength water proofing compound of approved brand & make, admixed with cement in the ratio as specified by manufacturer, in holes by pressure pump. iv) Plugging holes with polymer compound admixed with cement. v) Providing and laying of bonding slurry prepared by mixing of cement with approved make and brand acrylic polymer (as per IS 13435 Part-3) in two layers (totaling up-to 3mm thick) by brush. Second layer to be laid after 4 hours of first layer. vi) Providing and laying 15mm thick cement plaster in cement mortar 1:4 (1 cement : 4 coarse sand) and finishing the surface with neat cement admixed with integral water proofing compound (IS: 2645) as per manufacturers recommendations.
4
2768
692
Providing post water proofing treatment against dampness & Seepage in roof, terraces, sunken floor of toilets with reinforced acrylic breathable (polymer content 35%, elongation at break at 100%) coating consisting of following operations: i) Removing loose material and cleaning the surface. ii) Priming in one coat with water based acrylic emulsion. iii) Three coats with reinforced acrylic breathable polymer.
2.2
1344
611
Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric,
-
-
-
flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white
-
-
-
(iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer.
3.2
1347
421
(5) MORTARS
-
-
-
Cement Mortar 1:1 (1 cement : 1 fine sand)
1.4
8375
5982
Cement mortar 1:2 (1 cement : 2 fine sand).
1
4231
4231
Cement mortar 1:3 (1 cement : 3 fine sand).
1
3356
3356
Cement mortar 1:4 (1 cement : 4 fine sand).
1
2654
2654
Cement mortar 1:5 (1 cement : 5 fine sand).
1
2276
2276
Cement mortar 1:6 (1 cement : 6 fine sand).
1.3
2538
1952
Cement mortar 1:2 (1 cement : 2 coarse sand).
1.2
5077
4231
Cement mortar 1:3 (1 cement : 3 coarse sand).
1.3
4363
3356
Cement mortar 1:4 (1 cement : 4 coarse sand).
1.3
3450
2654
Cement mortar 1:5 (1 cement : 5 coarse sand).
1.5
3414
2276
Cement mortar 1:6 (1 cement : 6 coarse sand).
1.6
3123
1952
Cement mortar 1:8 (1 cement : 8 Coarse sand).
1.7
2768
1628
Cement mortar 1:2 (1 cement : 2 stone dust).
1.8
7616
4231
Cement mortar 1:2 (1 cement : 2 marble dust).
0.9
4526
5029
White cement mortar 1:5 (1 white cement : 5 marble dust).
0.8
2540
3175
White cement mortar 1: 2 (1 white cement : 2 marble dust).
1.1
11965
10877
White cement mortar 1:3 (1 white cement : 3 marble dust).
1.2
10369
8641
White cement mortar 1:5 (1 white cement : 5 marble dust)
1.6
9346
5841
Cement mortar 1:1:3 (1 cement : 1 marble dust : 3 stone dust)
15
80970
5398
Mud mortar
1.4
342
244
Cement Concrete 1: 6 : 12 (1 cement : 6 coarse sand : 12 crushed stone aggregate 12.5mm)
1
2428
2428
BRICK WORK
-
-
-
Brick work with modular well burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% in foundation and plinth in:
-
-
-
Cement Mortar 1:5 (1 Cement : 5 Coarse Sand)
1
3722
3722
Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)
1
3635
3635
Cement Mortar 1:8 (1 Cement : 8 Coarse Sand)
1
3548
3548
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
1.5
5462
3641
Cement Mortar 1:4 (1 cement : 4 coarse sand)
1.2
4142
3452
Cement Mortar 1:5 (1 cement : 5 coarse sand)
1.3
4355
3350
Cement Mortar 1:6 (1 cement : 6 coarse sand)
1.4
4568
3263
Cement Mortar 1:8 (1 cement : 8 coarse sand)
1.1
3473
3157
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
11.9
1440
121
Extra for brick work in square and rectangular pillars. (size not more than 600mm in any direction)
5.6
1036
185
Extra for brick work curved on plan upto mean radius not exceeding 6 m including form work.
6.5
2535
390
Half brick thick (9cm) brick masonry with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% upto plinth level:
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
8.4
3763
448
Cement Mortar 1:4 (1 cement : 4 coarse sand)
11.3
4916
435
Half brick thick brick masonry with modular well-burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% upto plinth level:
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
12.7
5461
430
Cement Mortar 1:4 (1 cement : 4 coarse sand)
4.2
1751
417
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
8.9
3507
394
Cement Mortar 1:4 (1 cement : 4 coarse sand)
9.4
3591
382
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
1
11
11
Half brick thick honey comb brick work with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% upto plinth level.
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
2
674
337
Cement Mortar 1:4 (1 cement : 4 coarse sand)
3.5
1152
329
Half brick thick honey comb brick work with modular well burnt clay bricks of crushing strength not less than 25 kg/sqcm and water absorption not more than 20% upto plinth level.
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
1.5
488
325
Cement Mortar 1:4 (1 cement : 4 coarse sand)
1.4
444
317
Half brick thick honey comb brick work with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 upto plinth level.
-
-
-
Cement Mortar 1:3 (1 cement : 3 coarse sand)
8.7
2619
301
Cement Mortar 1:4 (1 cement : 4 coarse sand)
6.8
1992
293
Extra for half brick thick honey comb brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
13.5
162
12
Extra for cutting or chamfering of bricks to required shape in brick masonry work
25
363
14.5
WOOD AND PVC WORK
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.
-
-
-
Teak wood
0.9
103282
114758
Sal, bijasal, benteak, khair, haldu
0.55
33578
61051
Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.
2
145
72.5
Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
-
-
-
Dash fastener 6x75mm
2
41
20.5
Dash fastener 10x75mm
2
55
27.5
Dash fastener 12x100mm
2
78
39
Providing and fixing 30mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area)
-
-
-
Teak wood
1
2256
2256
Bijasal, benteak, khair, haldu
1
1397
1397
Providing and fixing 30mm thick glazed shutter frames for windows, clerestory windows, ventilators etc. using glass panes including M.S. butt hinges with necessary screws but excluding glass panes. (Area of shutter to be measured without deducting paneling area).
-
-
-
Teak wood
1
2653
2653
Bijasal, benteak, khair, haldu wood.
2
3354
1677
Providing and fixing glass panes in glazed or paneled and glazed shutters of doors and window, clearstory windows etc (Only area of glass panes to be measured).
-
-
-
4mm thick
2
830
415
5mm thick
1
502
502
6mm thick
1
589
589
8mm thick
1
814
814
Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.
-
-
-
40 mm. thick (single leaf)
1.2
1921
1601
35 mm. thick (single leaf)
1.2
1644
1370
30 mm. thick (single leaf)
3
3591
1197
25 mm. thick (single leaf)
1
1081
1081
25 mm. thick (double leaf for cupboard shutters with piano type hinges
1
1092
1092
Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges.
-
-
-
40 mm. thick (single leaf)
2
4068
2034
35 mm. thick (single leaf)
2
3376
1688
30 mm. thick (single leaf)
2.1
3179
1514
25 mm. thick (single leaf)
1.2
1644
1370
25 mm. thick (double leaf for cupboard shutters with piano type hinges
2
2760
1380
Extra for double leaf shutter instead of single leaf.
8.12
422
52
Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made of partical board coated with 0.30mm membrane pasted with resin using vacuum treatment process complete all but excluding hinges.
-
-
-
35 mm thick (single leaf)
1.2
1894
1578
30 mm thick (single leaf)
1.3
1781
1370
Providing and fixing 30mm thick wire gauge shutter having top and style rail 95mm width, bottom and lock rail 197mm width, using galvanized M.S. wire dia of 0.45mm for doors, windows, clerestory windows excluding hinges.
-
-
-
Teak Wood
1
2477
2477
Bijasal, Haldu, Benteak, Khair
1
1722
1722
Extra for providing fixing galvanized M.S. wire dia of 0.60 mm instead of wire dia 0.45mm to doors, windows and clerestory windows.
11.22
202
18
Providing and fixing M.S. bright finished or black enameled Butt hinges IS : 1341 marked with necessary iron screws:
-
-
-
125x65x2.12mm
5
150
30
100x58x1.90 mm
6
123
20.5
75x47x1.70 mm
7
98
14
Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws:
-
-
-
300x16mm
5
388
77.5
250 x 16 mm
5
363
72.5
Providing and fixing M.S. bright finished or black enameled door latch with necessary iron screws:
-
-
-
300x20x6mm
4
214
53.5
250x20x6mm
4
202
50.5
Providing and fixing M.S. bright finished or black enameled 85x12mm pull bolt lock with necessary nuts and necessary iron screws.
5
178
35.5
Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws:
-
-
-
250 mm
9
311
34.5
200 mm
8
232
29
150 mm
8
184
23
100 mm
7
116
16.5
Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws:
-
-
-
125 mm
2
102
51
100 mm
2
91
45.5
75 mm
2
45
22.5
Providing and fixing M.S. bright finished or black enameled hooks and eyes with necessary iron screws:
-
-
-
300 mm
6
108
18
250 mm
6
93
15.5
200 mm
6
78
13
150 mm
6
66
11
100 mm
6
47
7.8
Providing and fixing M.S. bright finished or black enameled safety hasp and staples with necessary iron screws:
-
-
-
150 mm
12
426
35.5
115 mm
13
176
13.5
90 mm
14
161
11.5
Providing and fixing MS bright finished single hanging door stopper with necessary MS steel screws complete.
9
113
12.5
Providing and fixing powder coated M.S. butt hinges with necessary iron screws:
-
-
-
125x65x2.12 mm
12
438
36.5
100x58x1.90 mm
12
294
24.5
75x47x1.7 mm
14
231
16.5
50x37x1.5 mm
8
74
9.3
Providing and fixing powder coated M.S. pull bolt lock size 85x42mm with bolts, nut and necessary iron screws.
9
333
37
Providing and fixing powder coated M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 200 gms.)
9
284
31.5
Providing and fixing powder coated M.S. sliding door bolts with bolts, nuts and necessary iron screws:
-
-
-
300x16 mm
5
675
135
250x16 mm
5
635
127
Providing and fixing powder coated M.S. door latch with necessary iron screws:
-
-
-
300x20x16 mm
9
414
46
250x20x16 mm
8
328
41
Providing and fixing powder coated M.S. pull bolt lock of size 85 x 12mm with necessary bolts, nuts and necessary iron screws.
5
170
34
Providing and fixing powder coated M.S. tower bolts (Barrel type) with necessary iron screws:
-
-
-
250 x10mm
8
340
42.5
200 x10mm
8
268
33.5
150 x10mm
7
193
27.5
100 x10mm
7
133
19
Providing and fixing powder coated M.S. handles with necessary iron screws:
-
-
-
125 mm
5
308
61.5
100 mm
5
228
45.5
75 mm
5
173
34.5
Providing and fixing powder coated MS hanging door stopper with necessary powder coated MS steel screws complete.
5
75
15
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
-
-
-
300x16mm
4
676
169
250x16mm
4
564
141
Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
-
-
-
300x12mm
4
284
71
250x12mm
4
206
51.5
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete.
-
-
-
250 x10mm
3
212
70.5
200 x10mm
3
173
57.5
150 x10mm
2
89
44.5
100 x10mm
2
62
31
75 x10mm
2
49
24.5
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
-
-
-
150 mm
4
122
30.5
125 mm
4
104
26
100 mm
2
43
21.5
Providing and fixing hanging aluminium door stopper with necessary nickel plated iron screws etc complete.
-
-
-
Single
3
80
26.5
Double
2
74
37
Providing and fixing aluminium door mounted door stopper with necessary nickel plated iron screws etc complete.
-
-
-
100 mm long
12
540
45
75 mm long
9
347
38.5
60 mm long
8
256
32
50 mm long
7
179
25.5
Providing and fixing powder coated aluminium sliding door bolts with 16mm rod, necessary M.S. nuts bolts and screws etc complete.
-
-
-
300x16mm
3
525
175
250x16mm
2
300
150
Providing and fixing powder coated aluminium door latch with 12mm rod, necessary M.S. nuts bolts and screws etc complete.
-
-
-
300x12mm
2
150
75
250x12mm
2
109
54.5
Providing and fixing powder coated aluminium tower bolts (Barrel type) with necessary M.S. screws etc complete.
-
-
-
250 x10mm
2
149
74.5
200 x10mm
2
120
60
150 x10mm
2
93
46.5
100 x10mm
8
256
32
75 x10mm
4
102
25.5
Providing and fixing powder coated aluminium door handles 2.5mm thick with necessary M.S. screws etc complete.
-
-
-
150 mm
2
64
32
125 mm
2
55
27.5
100 mm
2
45
22.5
Providing and fixing hanging powder coated aluminium door stopper with necessary M.S. screws etc complete.
-
-
-
Single
2
55
27.5
Double
2
77
38.5
Providing and fixing powder coated aluminium door mounted door stopper with necessary M.S. screws etc complete.
-
-
-
100 mm long
3
141
47
75 mm long
2
80
40
60 mm long
2
66
33
50 mm long
2
53
26.5
Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.
-
-
-
150x2.5mm (heavy)
3
293
97.5
125x2.5mm (heavy)
2
153
76.5
100x2.5mm (heavy)
2
105
52.5
75x2.5mm (heavy)
2
69
34.5
125x1.9mm (light)
2
120
60
100x1.7mm (light)
2
80
40
75x1.7mm (light)
2
56
28
Providing and fixing stainless steel cutt hinges having thickness 1.2mm necessary stainless steel screws etc complete.
-
-
-
75x19x13mm
2
44
22
60x19x13mm
2
43
21.5
50x15x10mm
2
40
20
Providing and fixing stainless steel narrow hinges having thickness 1.2mm necessary stainless steel screws etc complete.
-
-
-
75x18x18mm
3
68
22.5
60x18x18mm
2
43
21.5
75x15x15mm
2
44
22
60x15x15mm
2
43
21.5
Providing and fixing stainless steel parliamentary hinges having thickness 2.5mm necessary stainless steel screws etc complete.
-
-
-
150x100mm
2
268
134
125x100mm
3
357
119
100x100mm
2
206
103
75x100mm
2
179
89.5
Providing and fixing stainless steel piano hinges with necessary stainless steel screws etc complete.
-
-
-
Overall width 35mm
2
276
138
Overall width 25 mm
2
246
123
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.
-
-
-
300mm
2
476
238
250mm
2
456
228
Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.
-
-
-
300mm
2
185
92.5
250mm
4
340
85
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.
-
-
-
250 x10mm
4
388
97
200 x10mm
4
282
70.5
150 x10mm
4
230
57.5
100 x10mm
4
164
41
75 x10mm
2
72
36
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete.
-
-
-
150 mm
18
441
24.5
125 mm
16
360
22.5
100 mm
6
132
22
Providing and fixing Stainless steel "D" shape door handles made of 10mm dia rod with necessary stainless steel screws etc complete.
-
-
-
200 mm
8
512
64
150 mm
12
594
49.5
125 mm
4
168
42
100 mm
6
210
35
75 mm
2
55
27.5
Providing and fixing stainless steel fixed stopper with necessary stainless steel screws complete.
-
-
-
100 mm long
2
193
96.5
75 mm long
4
324
81
60 mm long
10
735
73.5
50 mm long
4
260
65
Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge.
-
-
-
300 mm long
2
360
180
400 mm long
2
474
237
500 mm long
2
590
295
Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge
-
-
-
Extruded section Profile size 48x40 mm.
2
382
191
Extruded section Profile size 42x50 mm.
2.4
470
196
Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.
-
-
-
24 mm thick door shutters with styles and rails of size 59x24 mm
1.8
4318
2399
30 mm thick door shutters with styles and rails of size 60x30 mm
0.85
2115
2488
Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification.
0.9
2325
2583
Providing and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 thick FRP laminate for panels confirming to IS: 14856 - 2000, complete.
1.4
2957
2112
Providing and fixing 30mm thick fibreglass reinforced plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 : 2000, complete.
1.1
2855
2595
Providing and fixing factory made Pre-laminated particle board flat pressed three layer or graded wood particle board shutter (25 mm thick) with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all-round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of stainless steel hinges 100x1.7mm etc complete as per direction of Engineer-in-Charge
0.5
1742
3483
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete.
0.3
435
1450
Providing and fixing IS: 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc complete.
1.3
1369
1053
STEEL AND ALUMINIUM WORK
-
-
-
Structural steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.
11.2
689
61.5
Structural steel work riveted or bolted or welded in built-up sections, trusses and frames work upto a height of 5m above plinth level, including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.
9.2
607
66
Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.
-
-
-
Electric resistance or induction butt welded tubes Grade-250
6
531
88.5
Electric resistance or induction butt welded tubes Grade-300
5
468
93.5
Extra for curvature in making steel work in tubular structure in built-up sections, trusses and frame work
5
12
2.3
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.
-
-
-
In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.
6
420
70
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
6
408
68
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.
1.2
3996
3330
Providing and fixing sliding shutter with M.S. sheet 1mm thick, frame and diagonal braces of 40x40x6mm angle iron, 3.0 mm thick M.S. gusset plates at junctions and corners, 25mm dia pulley, 40x40x6mm angle and T-iron guide at top and bottom respectively including applying a priming coat of red oxide zinc chromate primer.
9
644
71.5
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.
6
450
75
Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer.
6
477
79.5
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
6
405
67.5
Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
“T” –iron frames
8
592
74
Angle-iron frames
7
515
73.5
MS tubular frames
2
161
80.5
Providing and fixing factory made ISI marks steel doors, windows and ventilators side/ top/ centre hung made up of standard rolled steel section conforming to IS 1038:1968 (viz. F7D, F4B, K11 and K12B etc.), joints mitred and flash butt and sash bars tenoned and riveted/ welded with 10 cm long lugs of size 15x3mm embedded in cement concrete block 15x10x10 cms of 1:3:6 (1 cement :3 Coarse sand: 6 graded stone aggregate 20 mm nominal size) or rawl plugs and screws or with bolts and nuts as required including providing and fixing of hinges, pivots, handles, pegs, stays, rolling devices, locking arrangements, spring catch etc., as required complete including applying a priming coat of red oxide zinc chromate primer.
3
264
88
Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer.
-
-
-
Single rebate/ mullion 80mmx50mm size, 1.25mm thick sheet
1.2
433
361
Single rebate/ mullion 80mmx50mm size, 1.6mm thick sheet
2.2
957
435
Single rebate/ mullion 100mmx50mm size, 1.25mm thick sheet.
1.2
469
391
Single rebate/ mullion 100mmx50mm size, 1.6mm thick sheet.
1.45
687
474
Double rebate 115mmx50mm size, 1.6mm thick sheet
1.3
686
528
Providing and fixing float glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators:
-
-
-
4mm thick
1.2
642
535
5mm thick
1.4
883
631
6mm thick
1.2
872
727
Providing and fixing tinted glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators:
-
-
-
4 mm thick
2.3
1477
642
5 mm thick
2.4
1836
765
6 mm thick
2.1
1938
923
Providing and fixing 27.5cm long wire spring for rolling shutters.
2.1
760
362
Providing and fixing M.S. sheet top cover for rolling shutter
-
-
-
1.25mm thick
1.6
864
540
1.20mm thick
1.5
795
530
0.90mm thick
2.32
926
399
Providing and fixing ball bearing for rolling shutters.
1.2
508
423
Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete.
1.3
1028
791
Providing and fixing approved pipe hand rail by welding to iron railing including applying a priming coat of red oxide zinc chromate primer.
-
-
-
M.S Pipe
2
161
80.5
E.R.W. pipe
3
270
90
G.I. pipe
3
279
93
Providing and fixing approved pipe hand rail to walls (ramps, stair cases) including cutting chases and repairing the same to original condition, applying a priming coat of red oxide zinc chromate primer.
-
-
-
M.S Pipe
3
213
71
E.R.W. pipe
3
237
79
G.I. pipe
3
254
84.5
Providing and fixing M.S. fan clamp/hook for ceiling fan made out of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop.
9
873
97
Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/ wooden/ angle iron posts (straight or diagonal) including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete(Cost of posts, struts to be paid for separately)
12
113
9.4
Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
15
2460
164
Providing and fixing concertina fencing with reinforced barbed tape (R.B.T.) up to 3m height of wall with existing angle iron in any shape in one or more rows in horizontal/ vertical/inclined alignment tied with G.I. staples and G.I. clips including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)(RBT tape to be measured for each row)
20
280
14
Providing and fixing in position welded steel wire fabric to concrete/ wooden/ angle iron posts including securing and screwing with G.I. tying wire, G.I. staples, G.I.U-nails or steel pins etc., complete
-
-
-
Aperture 75x25mm
1.42
782
551
Aperture 50x25mm
3.25
1849
569
Aperture 50x50mm
3.66
1958
535
Aperture 75x75mm
1.9
950
500
Aperture 100x100mm
1.46
654
448
Providing and fixing in position chain linked steel wire fabric made of 4 mm dia G.I. wire of required width in mesh to concrete/ wooden/ angle iron posts including securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins etc., complete.
-
-
-
Aperture 50x50mm
1.5
497
331
Aperture 75x75mm
1.7
495
291
Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete.
1.6
445
278
Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block.
2
139
69.5
Extra for powder coating (minimum 50 micron) on steel sections instead of red oxide zinc chromate primer
3
74
24.5
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:
-
-
-
For fixed portion
12
3972
331
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
11
3718
338
Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized.
12
324
27
Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized.
12
414
34.5
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 4 mm thickness
4.2
2566
611
With float glass panes of 5 mm thickness
11
7788
708
With float glass panes of 6 mm thickness
9.3
7477
804
With float glass panes of 8 mm thickness
8
8408
1051
Providing and welding 1mm thick MS sheet on existing door/ window/ ventilator shutter frames including applying a coat of red oxide zinc cromate primer on both side.(MS strip if provided on periphery or as intermediate member shall be paid extra)
8.39
4908
585
Providing and fixing of six/seven levers branded and approved mortise lock.
8
4752
594
Providing and fixing of floor spring IS: marked (Everite, Door link or any equivalent make) with stainless steel cover plate
6.3
12096
1920
Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.
-
-
-
SS Grade 204
6
2802
467
SS Grade 304
8
4200
525
Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately)
-
-
-
3mm thick
11.3
14498
1283
4mm thick
9.2
16054
1745
Providing and fixing laminated glass sheet of 8.76mm thickness in approved sizes on aluminium frame work on face of building. (Frame to be paid for separately).
7.3
19075
2613
ROOFING AND CEILING
-
-
-
Providing corrugated G.I. sheet roofing including vertical/ curved surfaces fixed with galvanized iron, J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead including painting with primer and paint on overlapping of sheets complete excluding the cost of purlins rafters and trusses. (Zinc coating not less than 272 gms/sqm)
-
-
-
1.00 mm thick sheet (weight 8.60 kg/m2)
1.4
1350
964
0.80 mm thick sheet (weight 7.03 kg/m2)
2.2
1782
810
0.63 mm thick sheet (weight 5.70 kg/m2)
8.9
6034
678
0.5 mm thick sheet (weight 4.30 kg/m2)
3.4
1836
540
Extra for straight cutting in C.G.I. sheet roofing for making opening of area exceeding 0.40 sqm for chimney stacks, sky light etc.
-
-
-
1.00 mm thick sheet
14.52
334
23
0.80 mm thick sheet
15.8
340
21.5
0.63 mm thick sheet
17.9
331
18.5
0.50 mm thick sheet
12
186
15.5
Extra for racking or circular cutting in C.G.I. sheets roofing:
-
-
-
1.00 mm thick sheet
1.2
166
138
0.80 mm thick sheet
2.4
326
136
0.63 mm thick sheet
3
402
134
0.50 mm thick sheet
2.8
302
108
Providing ridges or hips of 60cm overall width in plain G.I. sheet fixed with galvanized washers J or L hooks, bolts and nuts 8mm G.I. limpet and bitumen washers complete.
-
-
-
1.00 mm thick sheet with zinc coating not less than 275gm/sqm
4
2384
596
0.80 mm thick sheet with zinc coating not less than 275 gm/sqm
5
2665
533
0.63 mm thick sheet with zinc coating not less than 275gm/sqm
5
2225
445
0.50 mm thick sheet with zinc coating not less than 275 gm/sqm
1.6
608
380
Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
3.6
2290
636
Supply and fixing of polymer precoated galvalume profile sheets (PPGL) of approved size, shape and pitch of corrugation, total coated thickness (TCT) 0.60 mm +/- 5%, epoxy primer on both side of the sheet and colour polyester top coat 18-20 microns and 6-7 microns on bottom. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1.5
1040
693
Providing asbestos cement 6mm thick corrugated or semi corrugated sheets roofing fixed with galvanized J or L hooks, bolts and nuts 8mm dia G.I. plain bitumen washers complete excluding the cost of purlins, rafters and trusses.
1.55
538
347
Extra for asbestos cement corrugated/semi corrugated sheet roofing with vertical sheeting or sheeting to pitch exceeding 60 degree.
2.9
148
51
Extra for straight cutting in asbestos cement corrugated/ semi corrugated sheet roofing for making opening of area exceeding 0.40 sqm. for chimney stacks, sky light etc.
9
396
44
Extra for racking or circular cutting in A.C. corrugated/ semi corrugated sheet roofing.
9
518
57.5
Extra for making opening or recesses in asbestos cement corrugated/ semi corrugated sheet roofing of girth not more than 1 metre:
-
-
-
Not exceeding 100 sq.cm. in area
7
273
39
Exceeding 100 sq.cm but not exceeding 400 sq.cm in area
7
459
65.5
Exceeding 400 sq.cm. in area
6
558
93
Providing & fixing UV stabilized fibreglass reinforced plastic (FRP) sheet roofing upto any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovings incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
-
-
-
2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2"or 3"or 6") as specified.
1.2
919
766
2 mm thick flat
1.02
719
705
Providing and fixing corrugated fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with:
-
-
-
1.50mm thick fibre glass sheet
2.6
1258
484
2.00mm thick fibre glass sheet
2.4
1464
610
3.00mm thick fibre glass sheet
3.6
3164
879
Providing and fixing plain fibre glass sheet roofing in any shade/ colour fixed with G.I. ‘J’ hooks, bolts, nuts and washers etc. complete but excluding cost of purlins, rafters, trusses etc. with:
-
-
-
1.50mm thick fibre glass sheet
3.2
1421
444
2.00mm thick fibre glass sheet
4.5
2534
563
3.00mm thick fibre glass sheet
8.6
6880
800
Providing and fixing plain sheets ceiling with nails to the frame work for panels excluding frame work.
-
-
-
4 mm thick A.C. plain sheets
8.1
2519
311
6 mm thick A.C. plain sheets
7.3
2548
349
PLASTERING AND POINTING
-
-
-
Providing and making 6mm thick cement plaster of mix:
-
-
-
In Cement mortar 1:3 (1 cement : 3 fine sand)
1.8
167
93
In Cement mortar 1:4 (1 cement : 4 fine sand)
2.15
187
87
Providing and making 12mm thick cement plaster of mix:
-
-
-
In cement Mortar 1:3 (1 cement : 3 fine sand)
8.15
937
115
In Cement Mortar 1:4 (1 cement : 4 fine sand)
9.14
941
103
In Cement Mortar 1:5 (1 cement : 5 fine sand)
7.8
753
96.5
In Cement Mortar 1:6 (1 cement : 6 fine sand)
2.2
201
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:
-
-
-
In cement Mortar 1:3 (1 cement : 3 fine sand)
1
134
134
In Cement Mortar 1:4 (1 cement : 4 fine sand)
1
120
120
In Cement Mortar 1:5 (1 cement : 5 fine sand)
1.5
170
113
In Cement Mortar 1:6 (1 cement : 6 fine sand)
1.4
150
107
Providing and making 20mm thick cement plaster on stone masonry of mix:
-
-
-
In cement Mortar 1:3 (1 cement : 3 fine sand)
4
656
164
In Cement Mortar 1:4 (1 cement : 4 fine sand)
3
435
145
In Cement Mortar 1:5 (1 cement : 5 fine sand)
2
272
136
In Cement Mortar 1:6 (1 cement : 6 fine sand)
1.2
152
127
Neat Cement punning.
3.2
106
33
Providing and making 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and a thick coat of lime wash on top of wall when dry for bearing of R.C.C. slab and beam.
6.4
672
105
Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand).
12.2
1989
163
Providing and making 12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:
-
-
-
Flush bands
8
17
2.1
Sunk Bands
8
21
2.6
Raised Band
8
24
3
Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:
-
-
-
Flush bands
4
10
2.5
Sunk Bands
4
12
3
Raised Band
4
13
3.3
Drip course
2
7
3.6
Providing and making moulded mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:
-
-
-
12 mm thick
50
210
4.2
18 mm thick
50
280
5.6
Providing and making 18 mm thick moulded cement mortar band in two coats under layer of 12mm thick with cement mortar 1:5 (1 cement : 5 fine sand) and top layer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand) per cm width:
50
335
6.7
Providing and making 18 mm thick artificial red stone plaster consisting of 12mm thick under coat plaster 1:4 (1 cement : 4 fine sand) and 6mm thick finishing coat of cement mortar 1:1:3 (1 cement :1 marble dust: 3 stone dust) mixed with red oxide to match the shade of red stone.
15
3465
231
Extra for lining over plaster to imitate stone or concrete block walling.
22
517
23.5
Providing and making pointing on brick work with cement Mortar 1:3 (1 cement : 3 fine sand)
-
-
-
Flush pointing
14
378
27
Ruled pointing
11
369
33.5
Cut off weather struck pointing
10
420
42
Raised and cut pointing
9
536
59.5
Providing and making pointing on stone work with cement Mortar 1:3 (1 cement : 3 fine sand)
-
-
-
Flush pointing
11
556
50.5
Ruled pointing
15
855
57
Raised and cut pointing
14
1484
106
Providing sand faced plaster to concrete or brick masonry surface in all positions in two coats, base coat 13mm thick in C.M. 1:4, cleaning the surface by combing it and finishing coat 8mm thick in C.M. 1:3 and taking out grains on surface by hand operated mechanical arrangement with cost of all material labour, all leads & lifts, and scaffolding etc. complete.
10.4
1872
180
FLOORING
-
-
-
Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg/ sqm for receiving cement concrete floor including roughening cleaning etc complete.
12.3
418
34
25mm thick cement concrete flooring with 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with floating cost of neat cement.
14.3
2360
165
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.
-
-
-
40 mm thick
8.3
1843
222
50 mm thick
9.2
2337
254
75 mm thick
7.4
2553
345
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.
-
-
-
Size upto 200x300mm
12.4
7279
587
Size above 200x300mm
4.2
2713
646
Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.
-
-
-
Size 300x300mm
3.8
2630
692
Size above 300x300mm
6.2
4514
728
Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades over 20mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment complete.
-
-
-
Size 300x300mm thickness 7 to 8mm
9.8
7634
779
Size 400x400mm thickness 7 to 8mm
1.1
909
826
Size 600x600mm thickness 8 to 9mm
1.3
1166
897
Providing and laying Glazed Vitrified floor tiles (GVT/ PGVT) with digital print of random design water absorption less than 0.05% and conforming to IS : 15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below(+/-10mm) .laid on 20mm thick cement mortar 1:4 (1cement,4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete.
-
-
-
Size 600x600mm thickness 9 to 10mm
0.8
771
964
Providing and fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades on wall and dados over 20mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment complete.
-
-
-
Size 300x450mm thickness 7 to 8mm
1.2
852
710
Size 300x600mm thickness 7 to 8mm
1.25
1063
850
Size 400x800mm thickness 7 to 9mm
1.6
1435
897
Size 450x900mm thickness 7 to 9mm
1.7
1530
900
Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.
9.7
2328
240
Extra for fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 (Type 1) for interior applications, using 5kg. adhesive per sqm of tile area, in 3mm-6mm thickness in place of cement mortar.
1.2
229
191
40mm thick marble chips flooring rubbed and polished to granolithic finish with under layer 34mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white or black or white and black marble chips of size from 1mm to 4mm nominal size laid after mixing with cement marble powder in mix 3:1 (3 cement :1 marble powder by weight) in proportion of 4:7 (4 cement marble powder mix : 7 marble chips by volume)
-
-
-
Dark shade pigments with ordinary cement
1.1
446
405
Light shade pigment with white cement
1.1
494
449
Medium shade pigment with approx. 50% white cement, 50% ordinary cement
1.3
527
405
White cement without any pigment
1.5
600
400
Ordinary cement without any pigment
1.6
582
364
Precast Terrazzo tiles 22mm thick with graded white or black or white and black marble chips of size upto 6mm laid in floors, tread of steps and landing on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and polishing complete with precast tiles of:
-
-
-
Light shade using white cement
2.4
1675
698
Medium shade using approximately. 50% white cement and 50% ordinary cement.
2.6
1750
673
Dark shade using ordinary cement
1.8
1132
629
Extra if Terrazo tiles are laid in treads or steps not exceeding 30 cm. in width
1.2
20
17
Chequered precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
-
-
-
Light shade using white cement
1.1
704
640
Medium shade using approximately. 50% white cement and 50% ordinary cement.
1
591
591
Dark shade using ordinary cement
1
518
518
Ordinary cement without any pigment
0.9
463
514
15mm thick Marble stone slab flooring over 18mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including grinding rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above)
-
-
-
Makrana white second quality.
0.8
3002
3752
Raj Nagar plain.
0.7
1210
1728
Agaria White
0.9
2198
2442
Black Zebra.
1.1
1647
1497
Udaipur green marble
1.1
1647
1497
Pink plain marble.
1.1
1939
1763
Wonder marble.
2.1
5731
2729
Katni marble.
2.2
3870
1759
Providing and fixing un-polished 45mm to 50mm thick RAJIM SAND STONE in floors laid on sand bed of average thickness 50mm and pointing with cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete.
2.5
700
280
Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm
-
-
-
Plain/ normal coloured precast interlock concrete block
2.8
1221
436
Pigment Coloured (rubber mould) precast interlock concrete blocks
5.9
3729
632
Providing and fixing precast compressed plain cement concrete edge restraint block of size 500mmx250mmx60mm of compressive strength of 200kg per sq.cm manufactured by electro hydraulically operated block machine by excavated trench of 150mm depth, laid width wise etc. complete
6
1014
169
Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete.
-
-
-
One side polished
8.6
2847
331
Both side polished
7.9
3271
414
DISTEMPERING, PAINTING AND FINISHING
-
-
-
Providing and applying plaster of paris putty over plastered wall surface including scaffolding complete
-
-
-
Upto 2 mm thickness to make surface even and smooth in line and level.
11.35
715
63
More than 2 mm thickness to make surface even and smooth in true plumb and line and level.
14.25
1332
93.5
Providing and applying plaster of paris putty over plastered ceiling surface including scaffolding complete.
-
-
-
Upto 2 mm thickness to make surface even and smooth in line and level.
11.33
748
66
More than 2 mm thickness to make surface even and smooth in true plumb and line and level.
12.78
1086
85
Preparation of wall surface by applying a coat of putty comprising of chalk mitti, varnish and white lead in ratio 2½:1:1 (2½ kg chalk mitti : 1 litre varnish : 1 kg white lead) respectively, sand papering and making the surface smooth to proper shape and presentable conditions.
120.56
4220
35
White washing with lime to give an even shade.
-
-
-
On new work (Three or more coats)
100
940
9.4
On old work (Two or more coats)
90
495
5.5
On old work (one coats)
50
160
3.2
White washing with whiting to give an even shade.
-
-
-
On new work (Three or more coats)
200
1800
9
On old work (Two or more coats)
80
424
5.3
On old work (one coats)
70
210
3
Colour washing such as green, blue or buff with lime to give an even shade.
-
-
-
On new work (two or more coats) including a base coat of white washing
100.2
1202
12
On old work (Two or more coats)
12.1
68
5.6
On old work (one coats)
13.15
42
3.2
Distempering with acrylic washable distemper to give an even shade.
-
-
-
On new work (Two or more coats)
5
190
38
On old work (one or more coats)
30.3
530
17.5
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade.
-
-
-
On new work (two or more coats)
150.66
6704
44.5
On old work (one or more coats)
35.88
1023
28.5
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
82.99
1909
23
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
45.33
4284
94.5
Finishing walls with water proofing cement paint of required shade to give an even shade.
-
-
-
On new work (Two or more coats applied @ 3.84 kg/10 sqm)
84.78
3476
41
On old work (one or more coats applied @ 2.20 kg/10 sqm)
120.45
3071
25.5
Painting on new work (two or more coats) to give an even shade with:
-
-
-
Satin synthetic enamel paint
70
3850
55
Premium synthetic enamel paint
94.12
4424
47
Aluminium paint
65
3803
58.5
Black anti-corrosive bitumastic paint
59
2272
38.5
Black Japan paint
69.88
2725
39
Painting on old work (one or more coats) to give an even shade with:
-
-
-
Satin synthetic enamel paint
122.41
4284
35
Premium synthetic enamel paint
211
6330
30
Aluminium paint
234.11
8662
37
Black anti-corrosive bitumastic paint
200
5000
25
Black Japan paint
252.22
6432
25.5
Extra for painting with spray painting machine instead of paint brush:
-
-
-
On new work
802.66
4013
5
On old work
239.78
528
2.2
Removing white or colour wash by scrapping, sand papering and preparing the surface smooth including necessary repair to scratches etc. complete.
135.45
582
4.3
Removing dry or oil bound distemper by scraping sand papering and preparing the surfaces smooth including necessary repair to scratches etc. complete.
422.88
2199
5.2
DISMANTALING AND DEMOLISHING
-
-
-
Demolishing brick masonry including arches, stacking of serviceable material disposal of unserviceable material within 50 metres lead.
-
-
-
In mud mortar.
35.6
5482
154
In lime mortar.
25.55
4778
187
In cement mortar.
42.2
11099
263
Removing mortar from bricks and cleaning the bricks including stacking within 50 metre lead. (stacks of cleaned brick shall be measured).
-
-
-
In mud mortar
520
364
0.7
In lime mortar
900
900
1
In cement mortar
1100
1430
1.3
Demolishing stone rubble masonry including arches, stacking of serviceable material and disposal of unserviceable material within 50 Metres lead.
-
-
-
In lime mortar
6.4
1562
244
In cement mortar
4.6
2424
527
Dismantling flag stone flooring laid in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead.
11
627
57
Dismantling of old tarfelts of water proofing treatment of any course from the top of roof of any floor including disposal and removal of material with 50 metre lead.
141.14
1553
11
Dismantling cement asbestos or other hard board ceiling or partition wall including stacking of serviceable material and disposal of unserviceable material within 50m lead.
12.45
168
13.5
Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the materials with 50 m lead.
175.48
2895
16.5
Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling of karries and battens to be paid separately) including stacking of serviceable materials and disposal of unserviceable material within 50 metres lead.
33.49
18754
560
Dismantling wood work in frame, trusses purlins and rafters etc upto 10 metre span and upto 5 metre height above plinth level including stacking the material within 50 M. lead
-
-
-
Of sectional area 40 sq. cm and above
145.89
130426
894
Of sectional area below 40 sq.
200
720
3.6
Extra for dismantling wood work in frame, trusses purlins and rafters etc. for every additional span of one metre or part thereof beyond 10 metres.
-
-
-
Of sectional area 40 sq. cm and above
12.45
1656
133
Of sectional area below 40 sq.
300
120
0.4
Dismantling doors chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead.
25
2500
100
Dismantling windows chowkhats with shutters (steel or wood) including architrave, hold fast etc. complete and stacking within 50 metres lead..
55
3658
66.5
Taking out door shutters (steel or wood) including stacking within 50 metres lead.
38
1767
46.5
Taking out window shutters (steel or wood) including stacking within 50 metres lead.
46
1541
33.5
Dismantling steel work in single section in RS Joists, channels, angles, flats, I-section and T-section including dismembering and stacking within 50 metres lead.
1000
700
0.7
Dismantling steel work in built-up section in angles, channels, flats I-section and T-section including all gusset plates, bolts, nuts, cutting rivets, welding etc., including dismembering and stacking within 50 metres lead.
100
100
1
Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base.
126.86
2854
22.5
Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead.
160.44
1765
11
Demolishing R.C.C. work including stacking of steel bars and disposal of unserviceable material within 50 metre lead.
13.8
10598
768
Demolishing cement concrete including disposal of material within 50 metre lead.
-
-
-
1:4:8 or leaner mix
12.5
4113
329
1:3:6 or richer mix
15
8235
549
Extra for cutting reinforcement bars in R.C.C. or R.B work. (Cross-sectional area of RCC/RB work to be measured)
11
4917
447
Extra for scrapping cleaning and straitening reinforcement obtained on demolishing of R.C.C. or R.B. work.
400
840
2.1
REPAIR TO BUILDINGS
-
-
-
Repairs to plaster in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls with cement mortar 1:4 (1 cement : 4 fine sand) complete including disposal of rubbish to the dumping ground within 50metres lead :
-
-
-
Thickness upto 15mm
130.44
17218
132
Thickness more than 15mm and upto 20mm
120.29
17803
148
Providing and replacing broken floor tile with ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete.
-
-
-
Size 300x300mm
86.71
99803
1151
Size above 300x300mm
42.25
50151
1187
Providing and replacing broken floor tile with rectified ceramic glazed floor tiles of size 300x300mm and above conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, pointing the joints with white cement mixed with matching pigment etc., complete.
-
-
-
In all colours except White, Ivory, Grey, Fume Red Brown,
55.66
73304
1317
In colours such as White, Ivory, Grey, Fume Red Brown,
24.77
33786
1364
Providing and replacing broken floor tile with vitrified floor tiles with soluble salt printing, of size 600x600mm with water absorption less than 0.5% and conforming to IS : 15622 of approved make, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, grouting the joints with white cement and matching pigments etc. complete:
33.22
47239
1422
Providing and replacing broken floor tile with vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including removing the broken tile and mortar, grouting the joints with white cement and matching pigments etc. complete:
-
-
-
Size 600x600mm
38.99
62813
1611
Size 800x800mm
11.55
20848
1805
Size 1000x1000mm
15.35
31022
2021
Providing and replacing broken vitreous china water closet squatting pan (Indian type) including removing the broken squatting pan and mortar, cutting and making good the walls and floors wherever required:
-
-
-
White Long pattern W.C. pan of size 580 mm
3
4344
1448
Coloured Long pattern W.C. pan of size 580 mm
2
3590
1795
White Orissa pattern W.C. pan of size 580x440 mm
2
3776
1888
Coloured Orissa pattern W.C. pan of size 580x440 mm
2
5070
2535
Providing and replacing broken vitreous china water closet (European type W.C. pan) including removing the broken water closet (European type W.C. pan) cutting and making good the walls and floors wherever required :
-
-
-
White pedestal type
1
1295
1295
Coloured pedestal type
1
1810
1810
White wall hung type
1
2943
2943
Coloured wall hung type
1
4299
4299
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead :
-
-
-
Door chowkhats
3
1323
441
Window chowkhats
3
951
317
Clerestory window chowkhats
3
657
219
Renewal of old putty of glass panes (length)
150
2025
13.5
Refixing old glass panes with putty and nails
15.2
2660
175
Fixing old glass panes with wooden fillets (excluding cost of fillets)
25.36
3550
140
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase and making good and painting exposed portion of the clamps complete.
8
1152
144
Replacing Dholpur sand stone slabs 30 to 50 mm thick in roofing laid in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead :
3
975
325
Renewing Bijasal wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead :
1.4
84070
60050
Renewing Bijasal wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead :
-
-
-
Not exceeding 4.00 metres in length.
0.25
15225
60901
Above 4.00 metres and upto 5.00 metres length.
0.35
26733
76379
Renewing aluminium door/ window by replacing demaged member by anodised/ powder coated aluminium sections of same diamentions complete including depositng dismentalled section at departmental store.
12
4248
354
Providing and fixing galvanized wire gauge having M.S. wire dia of 0.45 mm for doors, windows, clerestory windows excluding hinges.
1.3
703
541
SANITARY INSTALLATIONS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
White Long pattern W.C. pan of size 580 mm
3
7377
2459
Coloured Long pattern W.C. pan of size 580 mm
3
8739
2913
White Orissa pattern W.C. pan of size 580x440 mm
2
5798
2899
Coloured Orissa pattern W.C. pan of size 580x440 mm
2
7090
3545
Providing and fixing vitreous china water closet squatting pan (Indian type) including cutting and making good the walls and floors wherever required:
-
-
-
White Long pattern W.C. pan of size 580 mm
3
2997
999
Coloured Long pattern W.C. pan of size 580 mm
2
2692
1346
White Orissa pattern W.C. pan of size 580x440 mm
1
1440
1440
Coloured Orissa pattern W.C. pan of size 580x440 mm
1
2086
2086
Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:
-
-
-
250x130x30 mm
2
540
270
250x125x25 mm
2
518
259
Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
-
-
-
White pedestal type
2
5764
2882
Coloured pedestal type
2
7184
3592
White wall hung type
1
4415
4415
Coloured wall hung type
1
5967
5967
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including cutting and making good the walls and floors wherever required:
-
-
-
White pedestal type
3
3540
1180
Coloured pedestal type
2
3390
1695
White wall hung type
2
5428
2714
Coloured wall hung type
2
8140
4070
Providing and fixing 10 litre capacity P.V.C. low level flushing cistern conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
White
3
2187
729
Coloured
4
3348
837
Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete.
-
-
-
White
4
5336
1334
Coloured
2
3882
1941
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
-
-
-
White Size 550x450 mm
3
4290
1430
White Size 550x400 mm
2
2816
1408
White size 450x325 mm
2
2406
1203
White Angle back size 400x400 mm
3
3522
1174
White Oval or round size 550x400mm.
3
4815
1605
White Surgeon type size 660x460 mm
3
7761
2587
Coloured Size 550x450 mm
3
5682
1894
Coloured Size 550x400 mm
3
5583
1861
Coloured size 450x325 mm
2
3102
1551
Coloured Angle back size 400x400 mm
2
3066
1533
Coloured Oval or round size 550x400mm.
2
4354
2177
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
-
-
-
White Size 550x450 mm
2
1872
936
White Size 550x400 mm
2
1830
915
White size 450x325 mm
2
1448
724
White Angle back size 400x400 mm
2
1430
715
White Oval or round size 550x400mm.
2
2262
1131
Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
-
-
-
Size 450x380 mm
1
3876
3876
Size 510x410 mm
1
4095
4095
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
32 mm dia
11
754
68.5
40 mm dia
13
1151
88.5
Providing and fixing PVC waste coupling in wash basin/ sink.
-
-
-
25 mm
15
743
49.5
40 mm
20
1220
61
Providing and fixing cast iron grating for gully trap.
-
-
30
100x100mm square or round
40
1200
30
150x150mm square
55
2090
38
Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design.
110
4510
41
Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
6
3594
599
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
5mm thick mirror
1.2
2419
2016
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
-
-
-
75 mm dia pipe.
5
910
182
110 mm dia pipe.
5
1335
267
150 mm dia pipe.
3
1320
440
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
Tee/ Tee with door/ Bend 45°/ Bend 90°
-
-
-
75 mm
12
1356
113
110 mm
13
2002
154
150 mm
13
3549
273
Double "Y" with or without door
-
-
-
75 mm
12
1548
129
110 mm
13
2912
224
Vent covel
-
-
-
75 mm
13
442
34
110 mm
11
484
44
Access door cap
-
-
-
75 mm
11
545
49.5
110 mm
15
885
59
"P" trap 110mmx110mm long
12
2724
227
Nahani trap 110x75mm
8
724
90.5
Multi floor trap 110
8
976
122
Plain reducing Tee 110x75mm
8
1032
129
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
75 mm
12
684
57
110 mm
10
610
61
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL
-
-
-
15 mm nominal outer dia .Pipes.
9
990
110
20 mm nominal outer dia .Pipes.
9
1359
151
25 mm nominal outer dia .Pipes.
7
1393
199
32 mm nominal outer dia .Pipes.
7
1897
271
40 mm nominal outer dia .Pipes.
5
1810
362
50 mm nominal outer dia .Pipes.
5
2800
560
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc.,
-
-
-
15 mm nominal outer dia .Pipes.
8
1064
133
20 mm nominal outer dia .Pipes.
5
835
167
25 mm nominal outer dia .Pipes.
4
852
213
32 mm nominal outer dia .Pipes.
4
1136
284
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK
-
-
-
15 mm nominal outer dia pipes
5
458
91.5
20 mm nominal outer dia pipes
5
605
121
25 mm nominal outer dia pipes
4
660
165
32 mm nominal outer dia pipes
4
912
228
40 mm nominal outer dia pipes
3
900
300
50 mm nominal outer dia pipes
3
1428
476
62.50 mm nominal inner dia pipes
1
1192
1192
75 mm nominal inner dia pipes
1
1682
1682
100mm nominal inner dia pipes
1
2325
2325
Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete:
-
-
-
15 mm dia. nominal bore
5
745
149
20 mm dia. nominal bore
5
925
185
25 mm dia. nominal bore
4
1032
258
32 mm dia. nominal bore
2
636
318
40 mm dia. nominal bore
2
728
364
50 mm dia. nominal bore
2
942
471
Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete:
-
-
-
15 mm dia nominal bore
7
1316
188
20 mm dia nominal bore
6
1326
221
25 mm dia nominal bore
4
1188
297
Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete:
-
-
-
15 mm dia. nominal bore
8
1048
131
20 mm dia. nominal bore
6
954
159
25 mm dia. nominal bore
6
1332
222
32 mm dia. nominal bore
5
1360
272
40 mm dia. nominal bore
2
616
308
50 mm dia. nominal bore
2
796
398
65 mm dia. nominal bore
2
1004
502
80 mm dia. nominal bore
2
1278
639
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured)
-
-
-
25 mm nominal bore
6
1200
200
32 mm nominal bore
5
1120
224
40 mm nominal bore
3
834
278
50 mm nominal bore
3
1041
347
65 mm nominal bore
2
972
486
80 mm nominal bore
2
1264
632
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:
-
-
-
15 mm nominal bore
8
680
85
20 mm nominal bore
5
490
98
25 mm nominal bore
4
468
117
32 mm nominal
4
592
148
40 mm nominal bore
4
676
169
50mm nominal bore
3
750
250
65mm nominal bore
3
1458
486
80 mm nominal bore
3
1587
529
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :
-
-
-
15 mm nominal bore.
9
1674
186
20 mm nominal bore.
5
995
199
25 mm nominal bore.
3
654
218
32 mm nominal bore.
3
744
248
40 mm nominal bore.
3
810
270
50 mm nominal bore.
3
1164
388
65 mm nominal bore.
3
1614
538
80 mm nominal bore.
3
2001
667
Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality:
-
-
-
Bib cock (250 grams)
2
370
185
Bib cock (350 grams)
4
948
237
Stop cock (350 grams)
3
711
237
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
-
-
-
Bib cock (400 grams)
5
1910
382
Long nose bib cock (500 grams)
4
1820
455
Long body bib cock (500 grams)
2
852
426
Piller Cock (400 grams)
2
796
398
Two way bib cock (800 grams)
1
708
708
Stop cock (concealed) (600 grams)
1
494
494
Angle valve for basin mixer and geyser points (450 grams)
1
382
382
Basin mixer pillar tap with spout (1000 grams)
1
1248
1248
Kitchen sink mixer with cast swivel spout (1000 grams)
1
1248
1248
Wall mixer with elegant knob (1400 grams)
1
1787
1787
Hand shower set with flexible extension pipe
1
754
754
Bottle trap set with extension pipes
1
473
473
Toilet paper holder
1
248
248
Soap dish plate
1
163
163
Shower rose (revolving type) (150mm)
1
269
269
Towel rail (600mm long x 20mm dia)
2
676
338
Towel ring (150 mm dia)
2
508
254
Wall mixer (telephonic type) with crutch arrangement for hand shower (1400gms)
1
1764
1764
Health foscet (hand jet) with flexible connection pipe (for WC)
2
1548
774
CP brass water jet to be fixed in seat cover of WC with flexible connection pipe
2
1154
577
Providing and fixing stainless steel drain jali of approved make/quality.
2
102
51
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
25 mm nominal bore
1
436
436
32 mm nominal bore.
1
510
510
40 mm nominal bore
1
596
596
50 mm nominal bore
1
762
762
65 mm nominal bore
1
1302
1302
80 mm nominal bore
1
1935
1935
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
15 mm nominal bore
1
284
284
20 mm nominal bore
1
394
394
25 mm nominal bore
1
432
432
Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) :
-
-
-
25 mm nominal bore
1
413
413
32 mm nominal bore
1
556
556
40 mm nominal bore
1
688
688
50 mm nominal bore
1
993
993
65 mm nominal bore
1
1776
1776
80 mm nominal bore
1
2513
2513
Providing and fixing gun metal non- return valve (vertical type) of approved quality (screwed end) :
-
-
-
25 mm nominal bore
1
451
451
32 mm nominal bore
1
608
608
40 mm nominal bore
1
753
753
50 mm nominal bore
1
1088
1088
65 mm nominal bore
1
1948
1948
80 mm nominal bore
1
2758
2758
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
150
1095
7.3
Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
2
1508
754
Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
1
4644
4644
DRAINAGE
-
-
-
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
100 mm diameter
8
1296
162
150 mm diameter
5
1310
262
200 mm diameter
5
2530
506
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design:
-
-
-
100 mm diameter S.W. pipe
4
1428
357
150 mm diameter S.W. pipe
3
1308
436
200 mm diameter S.W. pipe
3
1524
508
RAIN WATER HARVESTING & TUBEWELLS
-
-
-
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.
-
-
-
All types of soil
-
-
-
100 mm dia.
6
1782
297
125 mm dia.
6
1926
321
150 mm dia.
6
2034
339
200 mm dia
6
2226
371
Rocky strata including Boulders.
-
-
-
100 mm dia.
6
1872
312
125 mm dia.
5
1745
349
150 mm dia.
2
792
396
200 mm dia.
2
914
457
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.
-
-
-
All types of soil
-
-
-
100 mm dia.
5
1650
330
125 mm dia.
5
1745
349
150 mm dia.
4
1484
371
200 mm dia
4
1584
396
Rocky strata including Boulders.
-
-
-
100 mm dia.
6
1980
330
125 mm dia.
6
2226
371
150 mm dia.
3
1272
424
200 mm dia.
3
1425
475
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.
-
-
-
100 mm nominal size dia.
3
1362
454
125 mm nominal size dia.
2
948
474
150 mm nominal size dia.
2
1080
540
200 mm nominal size dia.
2
1946
973
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
100 mm nominal size dia.
5
2295
459
125 mm nominal size dia.
5
2520
504
150 mm nominal size dia.
3
1638
546
200 mm nominal size dia.
3
2937
979
Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.
-
-
-
100 mm nominal dia
5
4785
957
125 mm nominal dia
3
3393
1131
150 mm nominal dia
3
3912
1304
Supplying, assembling, lowering and fixing in vertical position in bore well, slotted casing pipe made from ISI marked G.I. pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (having slot of size 1.6/3.2 mm), of reputed and approved make, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
100 mm nominal dia
6
5814
969
125 mm nominal dia
5
5710
1142
150 mm nominal dia
5
6585
1317
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
100 mm nominal size dia having minimum wall thickness 5.0 mm
8
7200
900
125 mm nominal size dia having minimum wall thickness 5.0 mm
5
5365
1073
150 mm nominal size dia having minimum wall thickness 5.0 mm
5
6185
1237
200 mm nominal size dia having minimum wall thickness 5.4 mm
2
2954
1477
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
100 mm nominal size dia having minimum wall thickness 5.0 mm
6
5466
911
125 mm nominal size dia having minimum wall thickness 5.0 mm
4
4336
1084
150 mm nominal size dia having minimum wall thickness 5.0 mm
4
4992
1248
200 mm nominal size dia having minimum wall thickness 5.0 mm
2
2978
1489
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
3.2
3354
1048
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
3.89
2544
654
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
-
-
-
100 mm dia
7
1274
182
125 mm dia
5
1000
200
150 mm dia
5
1085
217
200 mm dia
5
1200
240
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
100 mm clamp.
7
7049
1007
125 mm clamp.
8
8248
1031
150 mm clamp.
6
6330
1055
200 mm clamp.
6
7194
1199
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).
-
-
-
100 mm dia
7
1071
153
100 mm dia
8
1320
165
150 mm dia
6
1026
171
200 mm dia
5
1000
200
25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone i/c grinding, rubbing and polishing.
5.4
2786
516
Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately).
-
-
-
Stone boulders of size range 5 cm to 20 cm, in recharge pit
2.36
2037
863
Gravels of size range 5 mm to 10 mm, over the existing layer of boulders
2.78
2241
806
Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel
1.92
904
471
Providing and placing in position India Mark II hand pump with 32 mm diameter riser pipe assembly complete with all accessories (riser pipe and plunger rod to be paid separately).
1.6
9782
6114
Providing ISI Mark 32 mm dia G.I. ( B class) riser pipe and M.S. plunger rod in 3 meter length socketed on one end as per IS: 1239 ( Part I) 1990 with up to date amendments and socket as per IS: 2062/1990 up to date amendments.
11
3025
275
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)
10
15020
1502
Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre)
400
7400
18.5
Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter.
10
6440
644
Distempering with washable distemper manufactured with the cow dung processing to give an even shade.
-
-
-
On new work (Two or more coats)
30.8
1632
53
On old work (one or more coats)
65.44
1963
30
Wall painting with premium emulsion (plastic) manufactured with the cow dung processing emulsion paint of required shade to give an even shade.
-
-
-
On new work (two or more coats)
185.33
12788
69
On old work (one or more coats)
355.44
14573
41
Painting exterior surface with SMOOTH exterior emulsion paint manufactured with the cow dung processing to give protective and decorative finish including cleaning washing of surface etc. complete with.
-
-
-
On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over)
198.55
15685
79
On old work (one or more coats applied @ 0.83 ltr/ 10 sqm over))
218.22
14621
67
Providing and applying 2mm thick ready mix exterior grade putty (manufactured with cow dung processing) on walls to make the surface smooth and even.
145.77
14851
101.88
Providing and applying for old work or existing old putty surface 1mm thick ready mix exterior grade putty (manufactured with cow dung processing) on walls to make the surface smooth and even.
157.99
8057
51
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements