Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Electrical and Electronics
Electrical Works
Opening Date10 Jul 2023
Closing Date26 Jul 2023
Tender AmountRefer Documents
Costs
EMD
₹ 1,39,193Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
141159Bid Award Id
ViewTender No
141159Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.cg.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
1678.42
109097
65
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
1729.23
641543
371
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
233.6
693786
2970
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).
382.73
1593304
4163
Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
3.2.1+3.4 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
368.78
1571170
4260.5
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:
3.12.1 Thermo-Mechanically treated bars FE 415
78565.01
4281793
54.5
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
1859.91
258527
139
Columns, Pillars, Piers and likes- rectangular or square in shape
751.96
223332
297
Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)
1405.95
330398
235
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
7.5.4 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)
124.72
406953
3263
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work.
6.89
29209
4237
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: 7.5.4+7.6 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand ) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
346.72
1173300
3384
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:
7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand)
280.31
107076
382
Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry.
280.31
17519
62.5
Providing and fixing 38 mm thick wooden shelves supported on 40x40x6 mm T or L in brackets fixed at suitable distance in 75x75x150mm blocks of cement concrete 1:2:4:
8.51.2 Bijasal, Haldu, Benteak, Khair
91.2
269496
2955
Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
9.16.2 Angle-iron frames
2268.25
166716
73.5
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.
8.12.3 30 mm. thick (single leaf)
133.04
243720
1832
Extra for double leaf shutter instead of single leaf.
11.34
589
52
Providing and fixing lipping with second class teak wood lipping on all edges of shutters.
8.18.3 35 x 6 mm size
429.1
23385
54.5
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
8.122.1 250 x10mm
74
5217
70.5
200 x10mm
50
2875
57.5
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete.
8.123.1 150 mm
132
4026
30.5
Providing and fixing aluminium door mounted door stopper with necessary nickel plated iron screws etc complete.
8.125.1 100 mm long
40
1800
45
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. complete.
102.42
323544
3159
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
1622.7
109532
67.5
Providing and making 6mm thick cement plaster of mix:
11.1.2 In cement mortar 1:4 (1 cement :4 fine sand)
1377.99
119885
87
Providing and making 12mm thick cement plaster of mix:
11.2.4 In cement mortar 1:6 (1 cement : 6 fine sand)
1823.97
166892
91.5
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:
11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand)
1302.61
139379
107
Providing and laying Glazed vitrified floor tiles ( GV1 PGV1 ) with Digital print of random design with water absorbtion less than 0.5% and confirming to IS : 15622-2017 of Ist quality approved make in all shade and size mention below (+/-0.10mm) , laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 sand ) including grouting the joints with white cement and matching pigments etc. complete . 12.76.1 Size 600x600 mm thickness 9 to 10 mm
1095.25
1055821
964
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.
12.7.1 Size upto 200x300mm
393.65
231072
587
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
4458.97
421372
94.5
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
4132.16
157021
38
Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:
14.16.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
1302.61
97044
74.5
Painting on new work (two or more coats) to give an even shade with:
14.22.1 Satin synthetic enamel paint
507.64
27919
55
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.
8.137.1 300mm
128
30464
238
Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm
12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks
81.6
51571
632
Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.
8.132.1 150x2.5mm (heavy)
192
18720
97.5
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
2.1.8 Beams, lintels, cantilevers & walls
30.47
6154
202
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
2.1.13 Weather shade, chhajja, Cornices and mouldings
4.86
1428
294
Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
6.1
570
93.5
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
14.84
1796
121
Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.
243
18225
75
Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.
8.13.2 35 mm. thick (single leaf)
6.3
8631
1370
Providing and fixing M.S. bright finished or black enameled sliding door bolts with bolts, nuts and necessary iron screws:
8.99.1 300x16mm
6
465
77.5
Providing and fixing M.S. bright finished or black enameled Tower bolts (Barrel type) with necessary iron screws:
8.102.2 200 mm
6
174
29
Providing and fixing M.S. bright finished or black enameled handles with necessary iron screws:
8.103.1 125 mm
6
306
51
Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height.
31.3
2691
86
Finishing walls with water proofing cement paint of required shade to give an even shade
14.14.1 On new work (Two or more coats applied @ 3.84 kg/10 sqm)
103.32
4236
41
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.
5.8
2006
346
Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter).
5.8
2006
346
Both side Pre-laminated panel PVC door shutter
1.68
4757
2832
Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :
18.1.3 White Orissa pattern W.C. pan of size 580x440 mm
5
14495
2899
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
18.76.1 75 mm dia pipe.
60
10920
182
110 mm dia pipe.
475
126825
267
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°
18.77.1.175 mm dia pipe.
106
11978
113
110 mm dia pipe.
197
30338
154
Vent covel
18.77.3.2 110 mm
15
660
44
Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete:
19.9.1 15 mm dia. nominal bore
10
1310
131
25 mm dia. nominal bore
15
3330
222
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:
19.11.1 15 mm dia. nominal bore
2
170
85
25 mm dia. nominal bore
4
468
117
Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality
19.13.2 Bib cock (350 grams)
1
237
237
Stop cock (350 grams)
1
237
237
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
19.14.1 Bib cock (400 grams)
35
13370
382
Stop cock (concealed) (600 grams)
55
27170
494
Providing and fixing stainless steel drain jali of approved make/quality
27
1377
51
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
4
6836
1709
Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
17
12818
754
Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete ncluding cutting and making good the
walls and floors wherever required :
18.4.1 White pedestal type
6
17292
2882
Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete:
18.9.1 White/ black
2
1240
620
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
18.17.1 White Size 550x450 mm
10
14300
1430
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :
18.21.2 1040x510 mm bowl size 460x410x200 mm
2
17078
8539
Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
5
2995
599
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
18.78.1 75 MM
15
855
57
110 mm
25
1525
61
Double "Y" with or without door
18.77.2.1 75 mm
12
1548
129
"P" trap 110mmx110mm long
14
3178
227
Nahani trap 110x75mm
30
2715
90.5
Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete:15 mm dia. nominal bore
50
7450
149
20 mm dia. nominal bore
15
2775
185
25 mm dia. nominal bore
60
15480
258
32 mm dia. nominal bore
20
6360
318
50 mm dia. nominal bore
70
32970
471
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:Bib cock (400 grams)
34
12988
382
Long body bib cock (500 grams)
2
852
426
Two way bib cock (800 grams)
2
1416
708
Angle valve for basin mixer and geyser points (450 grams)
10
3820
382
Soap dish plate
7
1141
163
Shower rose (revolving type) (150mm)
10
2690
269
Towel rail (600mm long x 20mm dia)
10
3380
338
Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) :25 mm nominal bore
21
8673
413
32 mm nominal bore
6
3336
556
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
4000
29200
7.3
Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1
cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand)
12 mm thick finished with a floating coat of neat cement complete as per
standard design :
8
37152
4644
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :150 mm diameter
50
13100
262
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design:150 mm diameter S.W. Pipe
50
21800
436
Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :100x100 mm size P type
20
8720
436
Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
18
120654
6703
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)
2
3004
1502
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.All types of soil 150 mm dia.
30
11130
371
Rocky strata including Boulders.150 mm dia.
110
46640
424
Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.150 mm nominal dia
30
39120
1304
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.150 mm clamp.
2
2110
1055
Providing and placing in position India Mark II hand pump with 32 mm diameter riser pipe assembly complete with all accessories (riser pipe and plunger rod to be paid separately).
1
6114
6114
Providing ISI Mark 32 mm dia G.I. ( B class) riser pipe and M.S. plunger rod in 3 meter length socketed on one end as per IS: 1239 ( Part I) 1990 with up to date amendments and socket as per IS: 2062/1990 up to date amendments.
55
15125
275
Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete:40 mm dia. nominal bore
9
3276
364
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:Cold twisted bar / Hot rolled deformed steel
1870.72
100083
53.5
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:Wall of any thickness including attached pilasters, buttresses etc. in super structure.
252.84
57647
228
Providing and making 12mm thick cement plaster of mix:In cement Mortar 1:3 (1 cement : 3 fine sand)
91.24
10492
115
Neat Cement punning.
136.84
4515
33
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level All types of soil 150 mm dia.
15
5085
339
Rocky strata including Boulders.150 mm dia.
95
37620
396
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.150 mm nominal size dia.
15
8100
540
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineerin- charge.150 mm nominal size dia.
7.5
4095
546
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:150 mm dia Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete:
1
217
217
Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 32 mm dia. nominal bore
140
38080
272
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 32 mm dia. nominal bore
1
224
224
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:32 mm nominal bore
12
1776
148
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):32 mm nominal bore
1
510
510
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for
the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.All types of soil 125 mm dia.
20
6420
321
Rocky strata including Boulders.125 mm dia.
40
13960
349
Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately).Stone boulders of size range 5 cm to 20 cm, in recharge pit
3.6
3106
863
Gravels of size range 5 mm to 10 mm, over the existing layer of boulders
3.6
2901
806
Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel
2.7
1271
471
Providing and fixing steel gate 9.6.1 Steel work welded in built up sections/ framed work including cutting,
70
33600
480
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:Cement Mortar 1:6 (1 Cement : 6 Coarse Sand ) Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Extra for brick work in square and rectangular pillars. (size not more than
600mm in any direction)
12.6
44969
3569
Providing sand faced plaster to concrete or brick masonry surface in all positions in two coats, base coat 13mm thick in C.M. 1:4, cleaning the surface by combing it and finishing coat 8mm thick in C.M. 1:3 and taking out grains on surface by hand operated mechanical arrangement with cost of all material labour, all leads & lifts, and scaffolding etc. complete.
975.8
175644
180
Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
165.6
36928
223
Granular Sub-base as per Table:- 400-1Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only)(b) For Sub-base cum drainage layer or upper sub-base with
(i) Grading-V Material Cum. 1372.00
66.4
91100
1372
Providing and laying cement concrete for plain concrete / reinforced concrete i/c formwork , shuttering complete as per drawing and specications (for village roads ) (ii) P.C.C. M-15
24.3
89788
3695
Providing and laying unreinforced cement concrete without dowel bar including formwork and Expansion , contraction and & Longitudenal joints as per design and as per IRC : 62-2014 ,over a prepared Base a per approved mix design and finishing to Lines and grades as per Drawing for Pavement thickness less than 200mmin low volume road P.C.C. Grade M-30 with minimum cement content @ 375 kg/Cum.
30
131730
4391
Providing and Laying of a reinforced cement concrete pipe duct , 300mm dia. Across the road (new construction), extending from drain to drain in cuts and toe of slopes to toe of slopes in fill , constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC Pipes as per IRC:98-2011 , bedded on a 0.3 m. thick layer of granular material free of rock pieces, outer to outer distance of pipes atleast half dia of pipe subject to minimum 450mm in case of double and triple row ducts , joints to be made leak proof , invert level of duct to be above heigher than ground level to prevent entry of water and dirt ,all as per Single row for one utility service
10
5530
553
Construction of RCC open drain 0.60m x 0.60m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation , dressing of sides and bottom, provision of HYSD reinforcement consisting 8 mm dia horizontal bars @ 150 mm c/c and L-shaped 8 mm dia vertical bars @ 150 mm c/c (L= 800 mm) including cutting , bending and binding wire, placing in position , providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications.
40
103680
2592
Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete. With smooth wheeled roller
24.3
6731
277
Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.7.1 ) Short Point
55
14630
266
Medium Point
65
27560
424
Long Point
180
105840
588
Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
52
11232
216
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
1.11.3 ) Long Point
11
14850
1350
Extra Long Point I
14
25298
1807
Extra Long Point II
21
48615
2315
Extra Long Point III
25
70625
2825
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
1.13.1 ) 3 X 1.5 sq. mm in 20mm conduit
275
25300
92
3 X 2.5 sq. mm in 20mm conduit
694
77034
111
6 X 2.5 sq. mm in 25mm conduit
389
66908
172
6 X 10 sq. mm in 40mm conduit
345
177675
515
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification.
5.4.9 ) Fan regulator (two module size) electronic stepped type moving all rounds
42
9366
223
Ceiling rose 3 pin 5 amp
139
5560
40
Batten/ angle holder
131
5371
41
Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification.
1
816
816
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification.
5.7.2 ) Deluxe
2
214
107
Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 ) 1200 mm sweep
5
8485
1697
1400 mm sweep
37
65601
1773
Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9
6.6.1 ) 300 mm sweep
12
29352
2446
Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.5 ) 12 Watt
131
28165
215
Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.19.3 ) 18/20 watt {4 feet}
99
43857
443
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.
6.28.8 ) 90 watt
14
77434
5531
Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification.
7.19.1 ) Upto 300 mm deep
1.5
10227
6818
Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.
7.21.2 ) 200 amp (25 x 5mm)
2
4764
2382
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.
9.1.24 ) 4 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 35KA
9
57402
6378
4 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 35KA
1
13051
13051
Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)
9.4.7 ) 12 way Double door
1
1101
1101
Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)
9.4.4 ) 4 way Double door
8
13728
1716
6 way Double door
1
2038
2038
Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
9.10.1 ) 6 amps to 32 amps
124
18724
151
Supplying and fixing following rating, 240 volts TWO POLE ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
9.19.3 ) 63 amps
1
337
337
Supplying and fixing following rating, 415 volts, FOUR POLES, ISOLATOR in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
9.20.3 ) 100 amps
9
5823
647
Providing and fixing 4 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification.
10.14.5 ) 200 amps
1
14682
14682
Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification.
10.15.3 ) 200/5 amps
1
347
347
Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification.
3
282
94
Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification
1
975
975
Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.
10.20.2 ) Digital type
1
835
835
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)
11
68299
6209
Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification.
220
16940
77
Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification.
16.6
2788
168
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1)
15.5.3 ) 2 x 10 sq. mm.
100
10600
106
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification , IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).
15.6.1 ) 3.5 x 50 sq. mm.
100
27800
278
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. .
15.23.14 ) 3½ X 50 sq. mm (32 mm)
8
1344
168
Supplying and making end termination with brass compression gland and copper lugs for following size armoured copper conductor power cable of 1.1 KV grade as per specification. .
15.24.3 ) 2 X 10 sq. mm (19 mm)
54
5238
97
Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010).
Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.
23.3.2 ) 1.5 HP, single phase
1
17589
17589
Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification.
23.6.1 ) 32 mm outer dia
96
5280
55
Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as per specification.
23.7.6 ) 32 mm dia.
1
526
526
Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set
1
4030
4030
Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification.
1
291
291
Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification
1
388
388
Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010).
Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.
23.14.3 ) 3x4.0 sqmm
180
16200
90
Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as per specification.
23.15.3 ) 3x4.0 sqmm
1
264
264
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements