Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Opening Date22 Nov 2024
Closing Date13 Dec 2024
Tender Amount₹ 6,53,23,000
Costs
EMD
₹ 3,26,615Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
161580Bid Award Id
ViewTender No
161580Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.cg.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
596.62
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).
24.26
-
-
... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.
M-20 Grade
162.86
-
-
... More
M-25 Grade
1730.48
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
671.81
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
227.96
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
20.92
-
-
... More
Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer.
2714.81
-
-
... More
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.
3024.25
-
-
... More
Wall of any thickness including attached pilasters, buttresses etc. in superstructure.
151.2
-
-
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
2489.85
-
-
... More
Beams, lintels, cantilevers & walls
2966.36
-
-
... More
Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)
1492.06
-
-
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and like.
107.46
-
-
... More
Spiral / folded plate type stair cases including risers and landings
845.15
-
-
... More
Weather shade, chhajja, Cornices and mouldings
167.11
-
-
... More
Extra for additional height every 1m or part thereof where height of staging for form work exceeds 4.0 metre with adequate bracing, propping etc at all levels, for suspended floor, roof, landing, beam and balcony. (only plan area is to be measured):
740.16
-
-
... More
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:
Thermo-Mechanically treated bars FE 500D
226460.87
-
-
... More
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
1582.82
-
-
... More
Carriage by mechanical transport upto 5 km lead:
Earth
1454.37
-
-
... More
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
2146.68
-
-
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work.
3.7
-
-
... More
Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Surface treatment by spreading emulsion under floor, over the plinth area
before laying base concrete @ 5 litres / sqm
3045.6
-
-
... More
Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
241
-
-
... More
Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
241
-
-
... More
Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified.
609.12
-
-
... More
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.
296.16
-
-
... More
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
Cement Mortar 1:6 (1 cement : 6 coarse sand)
711.88
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
368.24
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
196.5
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
59.39
-
-
... More
Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:
Cement Mortar 1:4 (1 cement : 4 coarse sand)
215.04
-
-
... More
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
170.04
-
-
... More
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
45
-
-
... More
Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry.
215.04
-
-
... More
Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.
Dash fastener 12x100mm
656
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.
Sal, bijasal, benteak, khair, haldu
4.56
-
-
... More
Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.
35 mm. thick (single leaf)
148.68
-
-
... More
30 mm. thick (single leaf)
67.2
-
-
... More
Extra for double leaf shutter instead of single leaf.
60.48
-
-
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.
6084
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:
For fixed portion
1471.5
-
-
... More
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
1471.5
-
-
... More
Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized.
1528.2
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness
235.8
-
-
... More
With float TOUGHENED glass of 4mm thickness
7.56
-
-
... More
Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete.
117.9
-
-
... More
Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete:
300x16mm
86
-
-
... More
Providing and fixing brass door latch with brass polished MS screws complete:
300x16x5 mm
42
-
-
... More
250x16x5mm
44
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete:
250x10mm
84
-
-
... More
150x10mm
44
-
-
... More
Providing and fixing Stainless steel "D" shape door handles made of 10mm dia rod with necessary stainless steel screws etc complete.
200 mm
164
-
-
... More
Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion & brass polished MS screws etc complete to suit the shutter thickness.
56
-
-
... More
Providing and fixing bright finished brass butt hinges with brass polished MS screws complete:
125x85x5.50 mm (Heavy Type)
400
-
-
... More
Providing and fixing chicken mesh weighting not less than 250 gms/sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height.
1670.22
-
-
... More
Providing and laying Glazed Vitrified Floor tiles (GVT/PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours,shade and size mensioned below(+/- 10mm),laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete.
Size 600x600 mm thickness 9 to 10 mm
1109.58
-
-
... More
Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFIED floor tiles(heavy duty) with water absorption less than 0.05% and conforming to IS: 15622-2017 of 1st quality of approved make in all colours,shade and size mensioned below(+/- 10mm),laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete.
Size 1000x1000 mm thickness 10 to 12 mm
549.7
-
-
... More
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).
Granite stone black
1103.43
-
-
... More
Extra for nosing in Granite stone for treads.
1250
-
-
... More
Providing and Fixing rectified glazed ceramic wall/dado tiles of 1st quality conforming to IS: 15622-2017 of approved make,in all colours shade in wall and dado over 12mm thick bed of cement mortar 1:3 (1 cement:3 course sand) and joining with grey cement slurry @ 3.3kg per sqm. including pointing in white cement mixed with matching pigment complete.
Size 300x450 mm thickness 7 to 8 mm
25.44
-
-
... More
Size 300x600 mm thickness 7 to 8 mm
717.24
-
-
... More
Providing and Fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS: 15622-2017 of approved make,in all colours shade over 20mm thick bed of cement mortar 1:3 (1 cement:3 course sand) and joining with grey cement slurry @ 3.3kg per sqm. including pointing in white cement mixed with matching pigment complete.
Size 300x300 mm thickness 7 to 8 mm
28.35
-
-
... More
Size 600x600 mm thickness 8 to 9 mm
235.12
-
-
... More
Providing and laying tectile Full body Vitrified tiles (for vision impared persons as per standard laid down in CPWD guide lines) of size 300x300 mm and total thickness 15 mm, water absorption less than 0.05% and conforming to IS: 15622-2017 of H & R Johnson or equivalent approved make in all standard colour laid on 20mm thick cement mortar 1:4 (1cement:4 course sand) including grouting th ejoints with white cement and matching pigments etc. complete.
Dot pattern hazard warning tectile 23 mm dia 36 dots (6 dots in both direction) and 5mm exposed from the surface.
251.16
-
-
... More
15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.
Granite stone grey/pink
68.15
-
-
... More
Providing and fixing 15mm thick Granite (machine cut, table rubbed & mirror polished on both sides) for partition curtain in toilets or similar locations of required size in wall with cement mortar 1:4 (1 cement : 4 coarse sand) including cutting chase in wall and joint with wall treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.
Granite stone grey/pink
4.68
-
-
... More
Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :
Medium shade using approximately. 50% white cement and 50% ordinary cement.
296.16
-
-
... More
Providing and making 6mm thick cement plaster of mix:
In Cement mortar 1:3 (1 cement : 3 fine sand)
2456.49
-
-
... More
In Cement mortar 1:4 (1 cement : 4 fine sand)
112.11
-
-
... More
Providing and making 12mm thick cement plaster of mix:
In Cement Mortar 1:5 (1 cement : 5 fine sand)
4283.19
-
-
... More
In Cement Mortar 1:6 (1 cement : 6 fine sand)
55.5
-
-
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:
In Cement Mortar 1:5 (1 cement : 5 fine sand)
4269.86
-
-
... More
In Cement Mortar 1:6 (1 cement : 6 fine sand)
92.5
-
-
... More
Providing and making 18mm thick cement plaster in two coats with under layer of 12mm thick plaster 1:5 (1 cement : 5 fine sand) and top layer of 6mm thick with cement plaster 1:3 (1 cement : 3 fine sand) finished rough with sponge.
2020.25
-
-
... More
Moulding cornices and cover.
Straight cornices in their length
149.7
-
-
... More
Curved cornices in their length
149.7
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom, kitchen etc., by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation:
i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
453.2
-
-
... More
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
9798.72
-
-
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
10177.54
-
-
... More
Wall painting with acrylic luxury emulsion (plastic) paint of required shade to give an even shade.
On new work (two or more coats)
9798.72
-
-
... More
Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:
On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
2217.09
-
-
... More
Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.
SS Grade 304
81
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
20293.2
-
-
... More
Painting on new work (two or more coats) to give an even shade with:
Premium synthetic enamel paint
5228.92
-
-
... More
Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
36.01
-
-
... More
Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.
2597.2
-
-
... More
Steel work in tubular (round, square or rectangular hollow tubes etc.) structure in built-up sections, trusses and frame work including cutting, hoisting, fixing in position upto a height of 5m above plinth level, consisting of columns trusses, roof and bottom purlins, base plate, holding down bolts, wind ties bracing (if required), bolts, nuts and washers for fastening etc. complete with applying a priming coat of red oxide zinc chromate primer.
Electric resistance or induction butt welded tubes Grade-300
68100
-
-
... More
Extra for hoisting trusses and placing in position over height above 5m for every 2.5 m height or part thereof.
68100
-
-
... More
Supply and fixing of polymer precoated galvalume profile sheets (PPGL) of approved size, shape and pitch of corrugation, total coated thickness (TCT) 0.60 mm +/- 5%, epoxy primer on both side of the sheet and colour polyester top coat 18-20 microns and 6-7 microns on bottom. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
2270
-
-
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :
Ridges plain (500-600mm)
56.6
-
-
... More
Gutter. (600 mm over all girth).
113.2
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story height made with 40mm dia. M.S. tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done).
1710
-
-
... More
INSTALLATION & FINISHING OF AIR CUSH WOODEN SPORTS FLOORING SYSTEM (volly ball/table tennis/squash court/badminton court)WITH WARANTY PERIOD FOR 5 YEARS FOR MATERIAL AND INSTALLATION APPLICATION MAINTENANCE :The SURFACE BOARD : Kiln seasoned imported (Sycamore0surface board finished with 21 mm thick 50-110 m width and in random length in tongue and groove shap. The edge of boards will have a finger lock groove and the bottom side with air pass groove. THE UNDER FRAM :made of commercial quality fir/spruce/pine wood runner of 90/70 mmx45 mm treated with anti-termite solutions and fixed on the bottom side with 18 mm thick air cushioning pads by nail through the two wings at 350 mm C/C. THE INSTALLATION :a vapour barrior of 6 mm (600 micron)thick will be placed on the leveled IPS sub floor before laying the under frame .The runners haing air cell cushioning pads will be placed on the vapour barrior in perfect level at 350 mm c/c in on direction. The surface board will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by the inserting the wooden adhesive. AN expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. THE FINISHING : after installation the floor will be machine sanded in uniform level and finished with Important Non-Skid Din Certified polyurethine lacquer Game Line marking will be carried out in required colors before applying the finish coat.
maple wood flooring (AB Grade)
(1) The timber used for surface board wil be imported maple.
(2) The varying color of the wood due to its natural characterstics wil not be considering as a defect.
(3) All timber will be free from loose knots bee or borer holes splits, cracks and fungal attack.
(4) All timber will be kiln seasoned with moisture content of app 12%
10394.16
-
-
... More
TECHNICAL SPECIFICATION OF MOVABLE BADMINTON POLE: Supplying and installation of movable badminton poles made by MS pipe with heavy solid weight 80 k.g each side with wheel and net,fine quality PU spray paint as per BWF specification.
4
-
-
... More
TECHNICAL SPECIFICATION OF BADMINTON COURT PVC FLORING : Supplying and installation of 4.5 mm thick (BWF certified) PVC mat Floring,Colour green, Redbound values=8% Anti slip Surface, to be glued/taped on top of the teak wod floring including line marking ,complete as per drawing and the direction of engineer-in-charge. Badmintion mat 4.5 mm (BWF certified)
8134.56
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
EXTERNAL WORK
15 mm nominal outer dia pipes
257
-
-
... More
25 mm nominal outer dia pipes
374
-
-
... More
32 mm nominal outer dia pipes
285
-
-
... More
40 mm nominal outer dia pipes
320
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (Dia of main line to be measured)
25 mm nominal bore
30
-
-
... More
32 mm nominal bore
12
-
-
... More
40 mm nominal bore
10
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):
25 mm nominal bore
30
-
-
... More
32 mm nominal bore.
12
-
-
... More
40 mm nominal bore
8
-
-
... More
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
40
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm nominal outer dia .Pipes.
257
-
-
... More
25 mm nominal outer dia .Pipes.
350
-
-
... More
32 mm nominal outer dia .Pipes.
280
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:
15 mm nominal bore
40
-
-
... More
25 mm nominal bore
20
-
-
... More
32 mm nominal
10
-
-
... More
Cutting holes upto 30x30 cm in walls including making good the same :
40
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
40
-
-
... More
Long body bib cock (500 grams )
5
-
-
... More
Piller Cock (400 grams)
32
-
-
... More
Two way bib cock (800 grams)
16
-
-
... More
Stop cock (concealed) (600 grams)
70
-
-
... More
Toilet paper holder
8
-
-
... More
Soap dish plate
8
-
-
... More
Towel rail (600mm long x 20mm dia)
8
-
-
... More
Health foscet (hand jet) with flexible connection pipe (for WC)
28
-
-
... More
Providing and fixing stainless steel drain jali of approved make/quality.
140
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
5mm thick Mirror
16.2
-
-
... More
Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White wall hung type
28
-
-
... More
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Oval or round size 550x400mm.
32
-
-
... More
Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:
Flat back half stall urinal of size 460x380x250mm
9
-
-
... More
Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour:
45 CM length
70
-
-
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia
32
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe.
241
-
-
... More
110 mm dia pipe.
762
-
-
... More
150 mm dia pipe.
200
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm
75
-
-
... More
110 mm
770
-
-
... More
150 mm
80
-
-
... More
Double "Y" with or without door
75 mm
15
-
-
... More
110 mm
20
-
-
... More
Vent covel 75 mm
25
-
-
... More
110 mm
25
-
-
... More
Nahani trap 110x75mm
98
-
-
... More
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
75 mm
250
-
-
... More
110 mm
350
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
12000
-
-
... More
Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
10
-
-
... More
Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
150 x 100 mm size P type.
4
-
-
... More
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
4
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
40
-
-
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:
On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
92.5
-
-
... More
Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 10 km (earth measured in stacks will be reduced by 20% for payment).
307.69
-
-
... More
Supplying and stacking sludge at site including royalty, loading, unloading and carriage upto 10 km (sludge measured in stacks will be reduced by 8% for payment).
100.7
-
-
... More
Supplying and stacking at site well decayed cow dung manure from approved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment).
100.7
-
-
... More
Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately).
509.09
-
-
... More
Mixing earth and sludge or manure in proportion specified or directed.
509.09
-
-
... More
Rough dressing the trenched ground including breaking clods.
932.4
-
-
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
932.4
-
-
... More
Fine dressing the ground
932.4
-
-
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:
Hedges like Alife, Dorenta, Tikoma etc
15
-
-
... More
Furn like Arica, China etc (3 year old)
10
-
-
... More
Hibiscus (Flower)/ Rose
12
-
-
... More
Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately).
In rows 7.5 cm apart in either direction.
559.44
-
-
... More
Excavation in Soil (by Mechanical Means.)Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300.
294.01
-
-
... More
Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
147.01
-
-
... More
Compacting Original Ground
Compacting Original Ground supporting embankment Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
147.01
-
-
... More
Providing & laying precast interlocking concrete blocks of minimum compressive strength of 300 kg/sq.cm and approved size ,shape/ pattern over coarse sand bed of thickness up to 40 mm and joints thick filled with fine sand including leveling with surface vibrator, temping and sweeping etc. complete as per IRC-SP-63-2004.
60mm thick Polymer coated coloured precast interlock concrete blocks
980.05
-
-
... More
Construction of R.R. masonry walls 0.45 m thick and 0.60 m height in CM 1: 3 including excavation , white washing two coats on one side of wall for guard wall/protection wall over 100 mm thick base concrete of PCC 1:3:6 etc complete.
80
-
-
... More
Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.
32
-
-
... More
Providing and fixing bright finished brass door handles with brass polished MS screws complete:
125 mm
8
-
-
... More
Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand).
196.83
-
-
... More
Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade.
On new work (two or more coats)
181.98
-
-
... More
Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide.
1575
-
-
... More
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.
All types of soil
150 mm dia.
100
-
-
... More
Rocky strata including Boulders.
150 mm dia.
142
-
-
... More
Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.
Rocky strata including Boulders.
150 mm dia.
120
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with Ivth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.
150 mm nominal dia
112
-
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:
150 mm dia
4
-
-
... More
Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)
4
-
-
... More
Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre)
6000
-
-
... More
Painting exterior surface with TEXTURED exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:
On new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
1076.14
-
-
... More
Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 25mm thick
15.6
-
-
... More
Construction of RCC Drain/Cover/Chamber
Excavation for drain (Earth work in excavation for drain/chamber as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)
217.31
-
-
... More
Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads)
P.C.C. M-10
43.46
-
-
... More
Construction of RCC Drain/Cover/Chamber
Construction of RCC drain/chamber cover, placing in position,providing shuttering and concreting by using concrete mixer,compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement.with RCC M-20
109.8
-
-
... More
Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in drain/cover/chamber complete as per Drawing and Technical Specifications.
6.59
-
-
... More
Neat Cement punning.
101.76
-
-
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.
75 mm thick
36
-
-
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements