Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Public Works Department - PWD Tender
Civil Works Water Works
Opening Date23 Dec 2019
Closing Date20 Jan 2020
Tender Amount₹ 58,43,16,000
Costs
EMD
₹ 5,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
59150Bid Award Id
ViewTender No
59150Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.cg.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Extra for every additional lift of 1.5 m or part thereof.1.6.1 All types of soil
280012.88
-
-
... More
Disposal of material by mechanical transport upto 15 km lead: Earth
20101.1
-
-
... More
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
138336.13
-
-
... More
Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.
9.9
-
-
... More
Diluting chemical emulsion (Chlorpyriphos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-temetreite treatment:(Five year service guarantee bond to be signed by contractor). 1.25.1 Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm.
2576.81
-
-
... More
Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diametre holes in plinth wall below plinth protection at the intervals of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
10
-
-
... More
Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diametre holes in plinth wall at the junction of floor at the intervals of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
249
-
-
... More
Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified.
515.36
-
-
... More
Providing and fixing fometrework including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: (a) 2.1.1 Foundations, footings, base of columns and plinth beam in any shape and size.
336.92
-
-
... More
Wall of any thickness including attached pilasters, buttresses etc.
5140.37
-
-
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and like.
52.38
-
-
... More
Edge of slab, breaks in floor and walls upto 200mm.
1576.16
-
-
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
4634.86
-
-
... More
Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes
26.01
-
-
... More
Suspended floors, roofs, access platfometre, balconies (plain surfaces) and shelves (cast in situ)
9443.17
-
-
... More
Beams, lintels, cantilevers & walls
9293.93
-
-
... More
Weather shade, chhajja, Cornices and mouldings
406.01
-
-
... More
Staircases of all types excluding spiral and folded plate type, including risers and landings
327.9
-
-
... More
Extra for additional height every 1m or part thereof where height of staging for fometre work exceeds 4.0 metre with adequate bracing, propping etc at all levels, for suspended floor, roof, landing, beam and balcony. (only plan area is to be measured):
443.11
-
-
... More
Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of fometre work.1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).
4.95
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
266.32
-
-
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
74.86
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mmnominal size).
7.86
-
-
... More
Providing and laying design mix reinforcement cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto floor five level excluding cost of reinforcement and fometre work.M-25 Grade
90.1
-
-
... More
M-30 Grade
9.6
-
-
... More
M-35 Grade
6072.8
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:GF to FF
449.94
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
FF to SF
446.09
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
SF to TF
449.31
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
TF to FF
449.31
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
FF to Terrace
443.9
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
Terrace to Mumty
94.98
-
-
... More
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:3.12.2 Themetreo-Mechanically treated bars FE 500D
986728.83
-
-
... More
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.
148.2
-
-
... More
Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded Floor Joint of 100 mm gapaluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s
pre-engineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confimetre to ASTM 6063).
145.62
-
-
... More
Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.200 mm wide.
145.62
-
-
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC, kitchen and the like consisting of:i) 1st course ii) 2nd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound including rounding off junction of vertical and horizontal surface.f applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound confometreing to IS 2645 including rounding off junction of vertical and horizontal surface iii) 3rd course of applying blown or residual bitumen applied hot @ 1.7 kg per sqm of area.iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg per sqm of area.iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg per sqm of area.
1037.21
-
-
... More
Providing and laying integral cement based water proofing treatment on roofs, balconies, terraces etc with average thickness of 120mm and minimum thickness at khurra as 65 mm, consisting of following operations including surface preparation:i) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement mixed with water proofing compound confometreing to IS. 2645 over the RCC slab including adjoining walls upto 300mm height.ii) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) mixed with water proofing compound confometreing to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) mixed with water proofing compound confometreing to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.iii) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound confometreing to IS : 2645.iv) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) mixed with water proofing compound confometreing to IS : 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.v) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order:
1534.8
-
-
... More
Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for underground structures using rough Kota stone and consisting of:i) 1st layer of 22mm to 25mm thick approved rough Kota stone slab over a 25mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound confometreing to IS:2645 over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.ii) 2nd layer of 25mm thick cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound.
3407.67
-
-
... More
Providing and laying integral cement based treatment for water proofing on the vertical surface at all levels by fixing 22 mm to 25mm thick rough Kota stone slab with cement slurry mixed with water proofing compound confometreing to IS:2645 with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand) with neat cement punning mixed with water proofing compound complete.
2467.75
-
-
... More
Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20kg/sqcm and water absortion not maore than 25% in foundation and plinth in:7.4.1Cement Mortar 1:6 (1 cement : 6 coarse sand)
8.53
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
10.12
-
-
... More
Half brick thick (9cm) brick masonry with modular well burnt clay bricks of crushing strength not less than 35 kg/sqcm and water absorption not more than 20% upto plinth level:7.9.2Cement Mortar 1:4 (1 cement : 4 coarse sand)
9
-
-
... More
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
9
-
-
... More
Extra for providing and placing in position hopping 25x1.60 mm or 2 no 6mm dia MS bars reinforcement at every third course of half brick masonry.
18
-
-
... More
Providing and laying AAC Autoclaved aerated concrete block confimetreing to IS: 2185 (Part-3)-1984) in block masonry with AAC blocks of width 100/200mm height 200/250/300mm, length 400/500/600 mm (approved sizes) with cement mortar 1 :6 (1 Cement :6 coarse sand) in superstructure. AAC blocks should have specific gravity 0.6 to 0.65 and crushing strength should not be less than 3 N/ sqmm (testing as per IS: 6441 - 1972)
1636.82
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).9.1.1Second class teak wood
18.55
-
-
... More
Providing and fixing flush door shutters, core of block board construction with frame of first class hard wood and well matched first class Indian teak ply veneering on one face and commercial ply veneering on the other face of the shutter with vertical grains, cross bands and face veneering excluding hinges.35 mm. thick (single leaf)35 mm. thick (single leaf)
64.68
-
-
... More
Extra for double leaf shutter instead of single leaf.
18
-
-
... More
Providing and fixing lipping with second class teak wood lipping (35 x 6 mm size) on all edges of shutters.
274.7
-
-
... More
Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.
3688
-
-
... More
Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.8.139.1300mm
840
-
-
... More
Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.250 x10mm
840
-
-
... More
Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete.8.140.2 125 mm
854
-
-
... More
Providing and fixing antique/ SS finished brass hanging door stopper with necessary antique/ SS finished MS steel screws complete.
420
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossedon the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete
420
-
-
... More
Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Dash fastener 10x75mm
2016
-
-
... More
Dash fastener 12x100mm
10532
-
-
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality confometreing to IS : 2046 Type S, including cost of adhesive of approved quality.9.127.1 1.5mm thick
148.08
-
-
... More
Providing and fixing of bright finished brass mortise latch 100X65mm and pair of lever handles with brass polished MS screws etc. complete.
345
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of requiredsize with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately)9.5.1.1 35 mm thick shutters
771.54
-
-
... More
Coir Veneer Board (confometreing to IS 14842)9.7.6.1 12 mm thick
617.23
-
-
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.The frame shall be filled with Mineral wool Insulation having density min
96kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 no( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant
primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded).
386.6
-
-
... More
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confimetreing to IS:3614 (Part II) or EN1634-1:1999,tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60
mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately).
259.68
-
-
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/
powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-incharge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.
37.44
-
-
... More
Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete.
116
-
-
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll fometreing process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of
water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)9.147A.1
32.4
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll fometreing process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in profile dimention in higher side shall be accepted but no extra payment on this account shall be made.9.147.2hree track three panels sliding window with fly proof S.S wire mesh (Two no glazed & one no wire mesh panels) made of (small series) frame 92x44 mm & sash 32x 60 mm both having wall thickness of 1.9+_.2 mm and single glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
25.5
-
-
... More
Three track three panels sliding window with fly proof S.S wire mesh (Two no glazed & one no wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
607.2
-
-
... More
Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete.
2667.18
-
-
... More
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).9.140.1 12mm thick commercial ply confometreing to IS : 1328 BWR type
2667.37
-
-
... More
Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug
etc. including priming coat complete.8.27.1 Kiln seasoned and chemically treated hollock wood
23.34
-
-
... More
Providing and fixing 200 mm wide teak wood moulding such as base moulding, chair rail, architrave, moulded posts moulding skirting including necessary screws and painting on unexposed surfaces with wood primer etc complete for per cm thick.
41.82
-
-
... More
Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 304
3201.29
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) confometreing to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing and panelling to be paid for separatelyFor fixed portion
363.84
-
-
... More
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
50
-
-
... More
Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized.
413.84
-
-
... More
Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board confometreing to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/ stainless steel screws etc. complete.With decorative lamination on both side
1.8
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 6 mm thickness
655.92
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width
1914
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-inchargePowder coated minimum thickness 50 micron aluminium
122
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge
(Door handle, lock and stopper etc.to be paid separately).
149.28
-
-
... More
Providing and fixing clear float toughened glass door or partition in required thickness frameless in appropriated sizes inclusive of edge molding polish and making required size slot or hole for patch fitting/hardware etc. The glass to be assembled together with patch fitting and hardware in proper alignment with all labour tools and tackles etc complete. (Patch fittings and hardware to be paid for separately)12 mm thick for door/partition.
143.37
-
-
... More
Providing and fixing of stainless steel grade 316 patch fitting and hardware of approved (Hardwyn,Ozone,Godrej) make in frame less toughened glass door or partition in proper alignment with all tools tackles and labour etc complete.Top patch with pivot SS grade 304
10
-
-
... More
Top/side patch glass or L-connector patch SS grade 304
10
-
-
... More
Bottom patch to be connected with floor machine
5
-
-
... More
Corner patch fitting with pivot SS grade 304
10
-
-
... More
H type handle 32×600mm SS 304 grade
146
-
-
... More
Providing and fixing Plain frosted glass film over glazed doors windows & partition etc. complete
182.5
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx650 micron thick (0.65mm), finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making
and finishing the outlet complete.
10
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
390.42
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intemetreediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,
shall be fixed in a direction perpendicular to G.I. intemetreediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimetre channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimetre of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimetre channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with12.5 mm thick tapered edge gypsum plain board confometreing to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
738.44
-
-
... More
Providing and fixing steel grid for false ceiling made from M.S. rectangular hollow tubes of 50x25x1.25mm (wall thickness) as main runners to be jointed to cross runners of same size by electric arc welding with spacing not exceeding 610x610mm in any direction. The frame to be screwed to the wall using wooden plugs and wood screws of size 50x8mm at an interval of not more than 300mm centre to centre. The grid to be supported using 6mm M.S. hanger bars at 1200mm centre to centre both ways bent, hooked, fixed to existing R.C.C. roof with fastner or to the truss as the case may be and bolted to the grid with the help of suitable M.S. holding cleats, complete.
30802.16
-
-
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to fometre a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm,resting on periphery walls /partitions on a Perimetre wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved exture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
600.13
-
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to fometre a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to fometre grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. resting on periphery walls /partitions on a Perimetre wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved exture in the grid, including, cutting/ making opening“for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.52.412.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre confometreing to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
1409.11
-
-
... More
Providing 10mm thick plaster of paris (Gypsum anhydrous) ceiling height of 5m. above floor level over strips (Sal, Bija, Haldu) 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed into wooden frame (Frame work to be paid separately)'10.53.1Flat surface
2332.47
-
-
... More
Curved surface
10
-
-
... More
Supplying and installation of moisture resistant/fire resistant 6 mm thick Heavy duty fiber cement board (High pressure steam cured) confometreing to IS 14862:2000 of category III type B as per standard sizes fixed with self-drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm.
93.01
-
-
... More
Providing and fixing semi transparent polycarbonate compact sheet roofing of approved colour to make any nometreal shape of roofing / covering of any pitch and fixing with specially designed powder coated aluminium section with 60mm wide flange of standard design weighing not less than 1.1 kg/ m at spacing not more than 1.2 m centre to centre with EPDM gasket and silicon sealant on all four edges of aluminium section fixed with self drilling stainless steel screws all complete including aluminium edge angle 40 mm x 40 mm x3mm as per manufacture specification and as per direction of Engineer-in-Charge.10.28.210 mm thick twin wall
181.52
-
-
... More
6mm thick cement plaster of mix:11.1.1In Cement mortar 1:3 (1 cement : 3 fine sand)
10622.16
-
-
... More
12mm thick cement plaster of mix:11.2.4In Cement Mortar 1:6 (1 cement : 6 fine sand)
18717.94
-
-
... More
15mm thick cement plaster on the rough side of single or half brick wall of mix:11.3.4In Cement Mortar 1:6 (1 cement : 6 fine sand)
5269.31
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles confometreing to IS: 15622 (thickness to be specified by the manufacturer), of approved any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete.
3424.52
-
-
... More
Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and confometreing to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete:12.13.2Size 800x800mm
4795.88
-
-
... More
Size 600x600mm
62.45
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and confometreing to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.11.46.2Size of Tile 600x600 mm
4074.97
-
-
... More
25 mm thick KOTA stone slab flooring over 20mm (average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm)
931.8
-
-
... More
KOTA stone slab 25mm thick in risers and treads of steps, skirting dado and pillar laid in 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. (single stone is to be used for riser and treads of steps and the width of stone for skirting and dado shall be equal to the height of skirting/ dado with a minimum length of 1.0 M.)
93.18
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
77.41
-
-
... More
15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above).12.45.1Granite stone grey/pink
1970.33
-
-
... More
Granite stone lakha red/ shahi red
582.43
-
-
... More
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).12.46.1Granite stone grey/pink
1593.7
-
-
... More
Granite stone lakha red/ shahi red
296.99
-
-
... More
Extra for noing in Granite stone for treads.
812
-
-
... More
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with :11.33.2Second class deodar wood
117.59
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).
(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
316.95
-
-
... More
Providing and filling in position, blown bitumen in expansion joints.
0.67
-
-
... More
15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platfometre, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.Granite stone black
682.5
-
-
... More
Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
1867.3
-
-
... More
Extra for fixing marble /granite stone in facia and drops of width upto 150 mm with epoxy resin based adhesive instead of cement mortar including cleaning etc. complete.
202.35
-
-
... More
Extra for making opening of required size & shape for wash basins/kitchen sink in kitchen platfometre, vanity counters and similar location in marble/Granite/stone work including making necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
123
-
-
... More
Providing and fixing clamps of required size and shape for anchoring stone wall lining to the baking or securing adjacent stone in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases and/or holes in stone/wall.tainless steel cramps with stainless steel nuts and bolts and washer (total weight not less than 260 gms).
9478.02
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smoothGranite Stone of approved shade.
6.64
-
-
... More
Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.8 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
200
-
-
... More
Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
220
-
-
... More
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of unifometre colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).White sand stone - 30mm thick gang saw cut stone
3450.09
-
-
... More
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC
surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).
48301.23
-
-
... More
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.
20701
-
-
... More
Wall painting with acrylic luxury emulsion (plastic) paint (top most approved branded quality) to give an even shade.14.10.1On new work (two or more coats)
28439.92
-
-
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
30259.14
-
-
... More
Distempering with acrylic washable distemper to give an even shade.14.90.1On new work (Two or more coats)
3971.1
-
-
... More
White washing with lime to give an even shade14.5.On new work (Three or more coats)
2359.14
-
-
... More
Painting exterior surface with TEXTURED exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with14.17.1On new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
1819.23
-
-
... More
Painting on new work (two or more coats) to give an even shade with:14.22.2Premium synthetic enamel paint
9
-
-
... More
Melamine polishing on wood work (one or more coat).
4405.08
-
-
... More
Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-charge
224.58
-
-
... More
Providing, Fabricating and fixing 8mm toughened glass glazing for shower area with single leaf glazed door of size as per drawings and fixed glazing, fabricated with SS Patch fitting of approved make. The rates shall include cost of all hardware including handles and fittings all complete as per drawings and as directed by the Engineer-in-chargeThe
318.33
-
-
... More
Providing and fixing Glass Reinforced Concrete (G.R.C) Column with Capitol and Base in approved size, pattern, design, shade and thickness of 50mm on frame and design element in in 18 – 20mm thick casted with layering technique Power Spray methodology have weight approximately between 5 – 7 kg per Sq. Ft. and color of M/S UniStone make or equivalent. The column should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Fine graded Quartz & Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘ZPXRC’ or equivalent, Polymers manufactured by ‘Dow Chemicals’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by Lanxess / ‘BAYFERROX (Gemetreany)’ or equivalent. The material casting should take place in FRP Moulds. The GRC flexural strength average L.O.P should be above or equivalent to 6 N/mm2 & M.O.R should be above or equivalent to 15 N/mm2 for tests done on 28 days cured samples .GRC Column 300mm dia 10 feet
82
-
-
... More
GRC Column 400mm dia 10 feet
150
-
-
... More
Providing and fixing UniStone GRC Pedestal Height: 1000 MM X 600 X 600 MM
30
-
-
... More
Providing and fixing UniStone GRC Pedestal Height: 1000 MM X 450 X 450 MM
18
-
-
... More
Providing and fixing UniStone or equivalent Glass reinforced concrete (G.R.C) stone Veneer in approved pattern i.e. ‘Sandstone’ or ‘Sculptured Stone’ both in size of (3 feet x1.5 feet) in shades and different textures of natural stone. All sand stone or sculptured stone finish veneer panels shall come with required corner pieces. The thickness of GRC wood veneers shall be between 8 -12mm having weight of approximately 1.5 kg per Sq. Ft. to 2.5 kg per Sq ft. The GRC stone veneers should be made from ‘43 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Gemetreany)’ LANXESS or equivalent. The material casting should take place in FRP Moulds. The GRC stone Veneer should be manufactured with M-40 Grade concrete mix design having ’43’ grade Portland cement, reinforced with Alkali Resistant glass fiber and the pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by ‘BAYFERROX (Gemetreany)’ or equivalent with high vibration technology. The material casting should take place in FRP Moulds. The desired shade to replicate natural tones of stone shall be achieved by using UV resistant exterior grade Synthetic inorganic pigments of
‘BAYFERROX, LANXESS or equivalent, imparting subtle color variation in order to make appearance of product natural. The fixing of GRC stone Veneers should take place on rough plastered surface of 1:3 (cement: coarse sand) with Dual fixing procedure i.e. exterior grade Cement polymer based tile adhesive ‘UniStone Ultimate’ or equivalent and high carbide galvanized steel concrete nails to be applied
2.07
-
-
... More
Providing and fixing of ‘Unistone’ or equivalent Glass Reinforced Concrete (G.R.C) Granite Stone
Block paver 107mm X 107 mm in approved shade, 55 mm thick of allowing overall dimensional
variance of ±5 mm in accordance with IS: 1237-1980. The paver should be made with M-40
Grade Concrete mix design having ‘43’ Grade White Portland cement, reinforced with Alkali
Resistant Glass Fiber and the pigmentation should be done with exterior grade synthetic
inorganic Mineral iron oxide pigments manufactured by ‘BAYFERROX (Gemetreany)’ or equivalent.
The pigmentation should be homogeneous and in accordance with British Standards BS EN
12878:1999. The other additives should be fine washed graded quartz, super plasticizers and
integrated water proofers and others. The pavers should be produced with high vibration
technology and should have compressive strength equivalent to M-40 Grade@28 days. The top
surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of
tiles, less than 1% and water absorption by 24 hours immersion method, less than 8%. The beds
where the pavers are to be laid shall be clean, wet and mopped. The bedding for the pavers
shall be20mm thick and with cement mortar 1:3 (1 cement: 3 coarse sand) and it shall be
spread properly and the usage shall begin only after 48 hours.
38
-
-
... More
Providing and fixing Glass Reinforced Concrete (G.R.C) Moulding/Cornice in approved size, pattern, design, shade and thickness of 50mm on frame and internal member in 18 – 20mm thick casted with layering technique Power Spray methodology have weight approximately between 5 – 7 kg per Sq. Ft. and color of M/S UniStone make or equivalent. The moulding/cornice should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Fine graded Quartz & Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘ZPXRC’ or equivalent, Polymers manufactured by ‘Dow Chemicals’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by Lanxess / ‘BAYFERROX (Gemetreany)’ or equivalent. The material casting should take place in FRP Moulds. The GRC flexural strength average L.O.P should be above or equivalent to 6 N/mm2 & M.O.R should be above or equivalent to 15 N/mm2 for tests done on 28 days cured samples.The fixing of panels should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer or self - tapping screws or as per approved shop drawings approved by site engineer in charge.UniStone GRC Moulding B Size: 340 MM X 435 X 1000 MM
394.25
-
-
... More
Providing and installing Twin Car Parking System of the following specifications a. Eletro-mechanical
b. Length 5000mm, width 2000mm
c. Height - As per site
d. Lifting capacity 2000 kg
e. Driving unit - 1.5KW of electro motor with traction chain and wire rope
f. Travel speed 3m/min
g. Push to run operation
Including all hardware all complete as per drawings and as directed by Engineer-in-charge
5
-
-
... More
Providing and fixing Antique looks for chhatttisgarhi culture ( Painting,murals, logo,and scruplture including signages )Ornamental work (Rot iron work wooden carving,Bellmatal work, Stone carving, Terracota,painting etc.)
1
-
-
... More
Providing and fixing kitchen under counter storages of size 12810mm (L) x 900mm (H) x 600mm (D) and locations as indicated in the drawings. The carcass shall be made from 18mm thick commercial BWP Ply with 1.5mm thick laminate of approved make, shade and colour. The ply shall be fixed to the wall surface by means of wooden cleats, SS screws etc. The shutters shall be made from 19mm thick commercial board finished on outer side with 1.5mm thick laminate and inner side with Enamel paint of approved shade over wooden primer fixed with SS Piano hinges. The shutters shall be provided with 150mm long SS Handles of approved make and design. The storage shall comprise of open shelves made from 19mm thick commercial board finished with 1.5mm thick laminate as indicated in the drawings all complete as directed by Engineer-in-charge. Rates shall include the cost for melamine polished teak wood moulding on all exposed sides.
2
-
-
... More
Providing and fixing kitchen Over Head Counter storages of size 12810 mm (L) x 750mm (H) x 450mm (D) and locations as indicated in the drawings. The carcass shall be made from 18mm thick commercial BWP Ply with 1.5mm thick laminate of approved make, shade and colour. The ply shall be fixed to the wall surface by means of wooden cleats, SS screws etc. The shutters shall be made from 19mm thick commercial board finished on outer side with 1.5mm thick laminate and inner side with Enamel paint of approved shade over wooden primer fixed with SS Piano hinges. The shutters shall be provided with 150mm long SS Handles of approved make and design. The storage shall comprise of open shelves made from 19mm thick commercial board finished with 1.5mm thick laminate as indicated in the drawings all complete as directed by Engineer-in-charge. Rates shall include the cost for melamine polished teak wood moulding on all exposed sides.
2
-
-
... More
Providing and installing Kitchen equipment as per details provided Annexure all completeSTORE SS Storage Rack 900x450x1800
3
-
-
... More
SS Pallet 600x450x300
1
-
-
... More
Ingredient Bin 450x450x850
2
-
-
... More
Work Table With Sink 1200x600x850
1
-
-
... More
SS Drain With Grating 900x350x70
1
-
-
... More
Two Sink Unit 1200x600x850
1
-
-
... More
Potato Onion Bin 600x600x1200
1
-
-
... More
Three Door Under Counter1800x700x865
1
-
-
... More
Double Over Head Shelf 1800x300x450+300
1
-
-
... More
Vegetable Cutting Machine
1
-
-
... More
Commercial Blender
1
-
-
... More
Meat Mincer
1
-
-
... More
Wet Tilting Grinder 10 ltr.
1
-
-
... More
Pulverizer2 HP
1
-
-
... More
Insect-O-Cutter
1
-
-
... More
Two Burner Range 1100x750x850
1
-
-
... More
Exhaust Hood With Fresh Air 1450x1200x600
1
-
-
... More
Work Table With Drawer600x750x850
1
-
-
... More
Dosa Plate 1200x750x850
1
-
-
... More
Exhaust Hood With Fresh Air 1500x1200x600
1
-
-
... More
Batter Holding Table 450x750x850
1
-
-
... More
Insect-O-Cutter
1
-
-
... More
Salamander
1
-
-
... More
idli steamer 54 idli
1
-
-
... More
work table 1200x750x850
1
-
-
... More
Three Door Under Counter1800x700x865
2
-
-
... More
work table for pick up 1800x700x865
1
-
-
... More
Double Over Head Shelf 1800x300x450+300
1
-
-
... More
SS Tandoor 750x750x850
2
-
-
... More
Tandoor Helping Table 1000x750x850
1
-
-
... More
Exhaust Hood With Fresh Air 2850x1200x600
1
-
-
... More
Two Burner Range 1100x750x850
1
-
-
... More
Exhaust Hood With Fresh Air 2500.x1200x600
1
-
-
... More
Work Table With Drawer600x750x850
1
-
-
... More
Single Burner For Kadai 600x750x850
1
-
-
... More
Insect-O-Cutter
1
-
-
... More
Three Door Under Counter1800x700x865
1
-
-
... More
Double Over Head Shelf 1800x300x450+300
1
-
-
... More
work table for pick up1800x700x865
1
-
-
... More
Double Over Head Shelf 1800x300x450+300
1
-
-
... More
Four Door Freezer 1350x800x2100
1
-
-
... More
work table 650x750x850
1
-
-
... More
PIZZA MAKE LINE 1800X700X850
1
-
-
... More
Microwave(menumaster)
1
-
-
... More
sandwich griller
1
-
-
... More
milk boiler
1
-
-
... More
work table 2000x750x850+150
1
-
-
... More
blender( hamilton beach)
1
-
-
... More
work table with sink and drain channel 1600x750x850+150
1
-
-
... More
SS Drain With Grating 900x350x70
1
-
-
... More
pop up toaster( kametrea )
1
-
-
... More
Insect-O-Cutter(pci)
1
-
-
... More
Two Sink Unit (1800x750x850+150)
1
-
-
... More
Dirty Dish Landing Table With Garbage Chute(1200x600x850)
1
-
-
... More
Pot Wash Rack (900x450x1500)
1
-
-
... More
SS Dish Rack (900x450x1800)
1
-
-
... More
SS Drain With Grating 1500x350x70
1
-
-
... More
Hood Type Dish Washer
1
-
-
... More
Loading Table 1200x750x850+150
1
-
-
... More
Unloading Table 1200x750x850+150
1
-
-
... More
Pre Rinse Unit
1
-
-
... More
Water Cooler(80/120 Ltr.)
1
-
-
... More
SS Drain With Grating 900x350x70
1
-
-
... More
Glass rack 900x600x1500
1
-
-
... More
Dust Bin (70 ltr)
1
-
-
... More
Weighing Scale (300 kg)
1
-
-
... More
Room Service Trolley900x600x900
1
-
-
... More
MS Gas Bank Cage(6 Cyclinder )
1
-
-
... More
Gas Line Pipe( 150 Runnig Feet)
150
-
-
... More
Fabric Wall Treatment: Providing & Fixing of Acoustical Fabric paneling with 12mm x 28mm UPVC Grippers fixed to 12mm thk ply strip to the GI Frame & the area between the GI frame will be filled with high insulation of 50mm thk 48kg/density rockwool The frame will fixed to the existing wall with necessary screw & fastners. Acoustical Fabric paneling rate as per quotation)all included
204.8
-
-
... More
Laminate Paneling: Providing & fixing of laminate paneling on 12mm thk ply base with fixed on GI Frame. The area between the GI frame will be filled with high insulation of 50mm thick 48kg density Rockwool . The frame will fixed to the existing wall with necessary screw & fastners.( rate as per quotation)all included
69.7
-
-
... More
Round Profile( rate as per quotation) all included
7.43
-
-
... More
Flush Door: Providing & Fixing of Laminated flush door of 100x 60x35mm complete with door frame with final finish.
9.7
-
-
... More
Door Corner (JAM)
12.18
-
-
... More
SKIRTING - 12mm ply with 1mm laminate
36.57
-
-
... More
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
542
-
-
... More
Diluting chemical emulsion (Chlorpyriphos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-temetreite treatment:(Five year service guarantee bond to be signed by contractor)Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm.
33.54
-
-
... More
Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diametre holes in plinth wall below plinth protection at the intervals of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
38.27
-
-
... More
Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diametre holes in plinth wall at the junction of floor at the intervals of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand).
38.27
-
-
... More
Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified.
6.71
-
-
... More
Providing and fixing fometrework including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:Foundations, footings, base of columns and plinth beam in any shape and size.
121.88
-
-
... More
Window sills, anchor blocks, string course, bends, copings, bed plates and like.
0.45
-
-
... More
Edge of slab, breaks in floor and walls upto 200mm.
38.27
-
-
... More
Columns, Pillars, Piers and likes- rectangular or square in shape
313.56
-
-
... More
Suspended floors, roofs, access platfometre, balconies (plain surfaces) and shelves (cast in situ)
32.12
-
-
... More
Beams, lintels, cantilevers & walls
320.28
-
-
... More
Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of fometre work.
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).
50.02
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).
247.99
-
-
... More
Providing and laying design mix reinforcement cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto floor five level excluding cost of reinforcement and fometre work.M-25 Grade
174.19
-
-
... More
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:Themetreo-Mechanically treated bars FE 500D
26128.2
-
-
... More
Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including fometrework.
94.43
-
-
... More
Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer.
604.34
-
-
... More
Applying a coat of hot bitumen 30/40 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
94.43
-
-
... More
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.
28.9
-
-
... More
Providing and laying integral cement based water proofing treatment on roofs, balconies, terraces etc with average thickness of 120mm and minimum thickness at khurra as 65 mm, consisting of following operations including surface preparation:i) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement mixed with water proofing compound confometreing to IS. 2645 over the RCC slab including adjoining walls upto 300mm height.i) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) mixed with water proofing compound confometreing to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) mixed with water proofing compound confometreing to IS : 2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.iii) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound confometreing to IS : 2645.v) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) mixed with water proofing compound confometreing to IS : 2645 including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep.v) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order
32.12
-
-
... More
Brick work with modular well burnt (open bhatta) clay bricks of crushing strength not less than 20kg/sqcm and water absortion not maore than 25% in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand)
177.97
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
171.7
-
-
... More
Providing and laying AAC Autoclaved aerated concrete block confimetreing to IS: 2185 (Part-3)-1984) in block masonry with AAC blocks of width 100/200mm height 200/250/300mm, length 400/500/600 mm (approved sizes) with cement mortar 1 :6 (1 Cement :6 coarse sand) in superstructure. AAC blocks should have specific gravity 0.6 to 0.65 and crushing strength should not be less than 3 N/ sqmm (testing as per IS: 6441 - 1972)
12.24
-
-
... More
Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Dash fastener 10x75mm
4
-
-
... More
Dash fastener 12x100mm
10773
-
-
... More
Providing & fixing Stainless steel SS 304 grade Sliding Gate including roller as required of approved make all complete as per directions of Engineer-in-charge
2835
-
-
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primeIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.r.
600
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) confometreing to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing and panelling to be paid for separatelyFor fixed portion
85.03
-
-
... More
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
132.86
-
-
... More
Extra for polyester powder coated (minimum 50 micron) aluminium sections instead of anodized.
217.88
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 6 mm thickness
6.31
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.Upto 5mm depth and 5 mm width
16.23
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-inchargePowder coated minimum thickness 50 micron aluminium
6
-
-
... More
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.80x1.25mm M.S. Laths
6
-
-
... More
Providing and fixing ball bearing for rolling shutters.
2
-
-
... More
Extra for providing grilled rolling shutter manufactured out of 8 mm dia. M.S. bar instead of laths as per approved design (area of grill provided, only to be measured).
6
-
-
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the area
6
-
-
... More
6mm thick cement plaster of mix:In Cement mortar 1:3 (1 cement : 3 fine sand)
33.91
-
-
... More
12mm thick cement plaster of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
90.02
-
-
... More
15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6 (1 cement : 6 fine sand)
1551.76
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles confometreing to IS: 15622 (thickness to be specified by the manufacturer), of approved any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,
including pointing in white cement mixed with pigment of matching shade complete.
35.16
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
2310.99
-
-
... More
Granite stone slab 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete.
1790.1
-
-
... More
Providing and laying Gravel / Pebble stones in flooring laid loose on cemented base. The pebbles shall be 30-50mm in diametre and shall be of approved colour. The cost shall include the base preperation as per drawings and as directed by the Engineer-in-charge
22.5
-
-
... More
Supplying and stacking at site.90 mm to 45 mm size stone aggregate
365.46
-
-
... More
63 mm to 45 mm size stone aggregate
365.46
-
-
... More
53 mm to 22.4 mm size stone aggregate
365.46
-
-
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in unifometre thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .
1096.38
-
-
... More
15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platfometre, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.Granite stone black
1058.01
-
-
... More
Providing and fixing clamps of required size and shape for anchoring stone wall lining to the baking or securing adjacent stone in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases and/or holes in stone/wall.Stainless steel cramps with stainless steel nuts and bolts and washer (total weight not less than 260 gms).
4296.25
-
-
... More
Wall painting with acrylic luxury emulsion (plastic) paint (top most approved branded quality) to give an even shade.On new work (two or more coats)
88.77
-
-
... More
Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even.
147.49
-
-
... More
Distempering with acrylic washable distemper to give an even shade.On new work (Two or more coats)
25.01
-
-
... More
Painting exterior surface with TEXTURED exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete withOn new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
58.72
-
-
... More
Painting on new work (two or more coats) to give an even shade with:Premium synthetic enamel paint
92
-
-
... More
Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shade and thickness of 50mm on frame and design element in 30mm thick casted with power spray method have weight approximately between 3.5 – 4 kg per Sq. Ft. of M/s UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, having Alkali Resistant Glass Fiber percentage 3.5-4% with minimum zirconia content 16%,manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant non fading Synthetic inorganic exterior grade pigments should be used for homogeneous concrete pigmentation manufactured by ‘BAYFERROX (Gemetreany)’ or equivalent. The material casting should take place in FRP Molds. The GRC screens flexural strength average L.O.P should be above or equivalent to 6N/mm2 & M.O.R should be above or equivalent to 15 N/mm2 The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, or S.S. -304 clamps, fixtures and fasteners of Hilti / Fischer or self - tapping screws or as per approved shop drawings approved by site engineer in charge.
581.97
-
-
... More
LANDSCAPE(Horticulture) Trenching in ordinary soil upto a depth of 60cm including removal and stacking of serviceable materials and then disposing of by spreading and
neatly leveling with in a lead of 50m and making up the trenched area to
proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of
imported earth, sludge or manure).Landscape Area
330
-
-
... More
Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment).Landscape Area
330
-
-
... More
Supplying and stacking at site well decayed cow dung manure from approved source, including loading, unloading and carriage upto 5 km (manure measured in stacks will be reduced by 8% for payment). Landscape Area
55
-
-
... More
Rough dressing the trenched ground including breaking clods.Landscape Area
550
-
-
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.Landscape Area
550
-
-
... More
Fine dressing the ground
550
-
-
... More
Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately)Landscape Area
110
-
-
... More
Mixing earth and sludge or manure in proportion specified or directed.
110
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materialsdeclared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50m lift upto 1.5 m complete (cost of sludge,manure or extra earth to be paid for separately).
550
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 1.2 m dia and 1.2 m deep.
49
-
-
... More
Holes 60 cm dia, and 60 cm deep.
700
-
-
... More
Filling mixture of earth and sludge or manurein the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).
550
-
-
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well
45
-
-
... More
Plumeria rubra height 120-150 cm., 3-4 branches and thick stem in big
size HDPE bag
25
-
-
... More
Wadelia trilobata,full of leaves in 15 cm size of Earthen Pot / Plastic Pot.
8000
-
-
... More
Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh
and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot.
350
-
-
... More
Asparagus Meyeri, well developed 15 to 20 leaves, full of branches and
foliage in 25 cm size of Earthen Pot / Plastic Pot.
5000
-
-
... More
Dracaena Fragrans”Massangeana’’ having ht. 30 cm & above with full of
leaves, well developed, fresh and healthy in 25 cm size of Earthen pot /
Plastic pot.
65
-
-
... More
Rhapis Palm having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well
developed, full of fresh & healthy leaves from bottom to top in 25 cm size
Earthen pot / Plastic pot.
85
-
-
... More
BATH FITTINGS SANITARY FIXTURE & C.P.FITTINGSProviding and fixing white glazed vitreous Wall mounting type (European style) P trap water closet with solid white plastic seat and lid, C.P.brass hinges and rubber buffers with 3/6 dual flush concealed cistern including reqd. fitting, CP actuator, CI chair etc. complete.(Make:Jaquar:Cat. OPS-WHT-15955NUF, Con, Cis: Jaquar JCS-WHT-2400S, Flush Plate:- JCP-CHR-352415
105
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.3.1W.C. pan with ISI marked white solid plastic seat and lid
13
-
-
... More
Providing and fixing under counter wash basin with basin mixer complete including fixing of wash basin with brackets and cutting and making good the wall complete.Under Counter wash basin (Make : Jaquar Cat. no FLS-WHT-5701)
114
-
-
... More
Basin mixer (Make:Jaquar Cat no-SOL-6001B)
114
-
-
... More
Half threaded waste coupling: (Make:Jaquar Cat. noALD-709)
114
-
-
... More
Bottle trap : (Make:Jaquar Cat no ALD-769L250x190)
114
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 1145x510 mm bowl size 560x410x241 mm
13
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality confometreing to IS:8931 :18.49.118.49.1 15 mm nominal bore
14
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal with urinal sensor with automatic and manual of required size having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-chargeConcealed inlet urinal (Make:Jaquar Cat. noURS-WHT-13259)
4
-
-
... More
Half threaded waste coupling: (Make:Jaquar Cat. noALD-709)
4
-
-
... More
Electronic Sensor (Make:Jaquar Cat No SNR-CHR-51097)
4
-
-
... More
Bottle trap: (Make:Jaquar Cat no ALD-769L250x190)
4
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1One urinal basin with 5 litre white P.V.C. automatic flushing cistern
6
-
-
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 18.25.2 40 mm dia
13
-
-
... More
Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
90
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 18.30.15mm thick mirror
16.72
-
-
... More
Providing and fixing 600x120x5mm glass shelf with edges rounded off
105
-
-
... More
Providing and fixing 15mm dia C.P. brass quarter turn angle valves with C.P. copper connecting pipe, union nut and C.P. brass wall flanges. (Make:JAQUAR, Model – VGP-81053)
373
-
-
... More
Providing and fixing C.P. brass quarter turn concealed stop cock with C.P. copper connecting pipe, union nut and C.P. brass wall flanges. (Make:JAQUAR, Model – VGP-81083K) Conc. Part. Model-( ALD-081)
101
-
-
... More
Providing and fixing, testing and commissioning of (Health faucet) with 1metre Long easy flex tube in chrome finish & with hook etc. complete.(Make:JAQUAR, Model:ALD-577)
105
-
-
... More
Providing and fixing CP brass toilet paper holder: Make-Jaquar Cat. no AHS-1551)
105
-
-
... More
Supplying of wall mounting type soap dish with CP brass screws (Make: Jaquar Model noAKP-35731P)
114
-
-
... More
Supplying of wall mounting type towel rail 600mm long with CP brass screws (Make: Jaquar Model no AQN-7711)
114
-
-
... More
Providing and fixing CP brass shower set comprising of CP brass wall mixer, 115mm long bend, wall flange, spout, shower ametre, shower rose complete including cutting and making good the wall etc. (Make:Jaquar Cat nomixer- CON-273KNUPR, Ametre-SHA-455L600, Rose-OHS-35495)
114
-
-
... More
Providing and fixing sink mixer with swivel spout including cutting and making good the wall complete. (Make: Jaquar Cat. no CON-309KN)
13
-
-
... More
Prividing and Fixing SS liquid soap dispenser SS body and push button complete in all respects including fixing on wall with rawl plug complete in all respects.(Make: Euronic Model no ES 06 A)
4
-
-
... More
Prividing and Fixing automatic 'NO-Touch ' electric hand-driers complete with all accessories & fittings.(Make: Euronic Model no KINOX (KJD 1)
4
-
-
... More
Providing and fixing Drain channel fixed to floor with . all accesoories viz mesh grating, vertical outlet, foul smell trap, sieve, vinyl seal set, corner units, horizontal/vertical outlets fixed to floor with all accessorie etcACO E-Line channel 750mm long
101
-
-
... More
Providing and fixing Drain channel 200mm wide in SS 304 construction and in different lenghts including all accesoories viz mesh grating, vertical outlet, foul smell trap, sieve, vinyl seal set, corner units, horizontal/vertical outlets fixed to floor with all accessories.Make ACO Drain Channel
20
-
-
... More
Providing and fixing Electrical storage water heaters of adequate capacity fixing on wall with dash fastener compelete as per manufacturers spacifications.horizontal/vertical outlets fixed to floor with all accessories .15 Liters water mounted heater Make AO Smith Model noEWSH
3
-
-
... More
50 Liters water mounted heater Make AO Smith Model noHSE-HNS
3
-
-
... More
Providing and fixing SS mat finish wall hanging type water dispenser capable to deliver 8 gallon chilled water and with UL and NSF certification and UV SS 304 fitted within fountain complete including fixed to wall with all accessories.(Make: OASIS, Model:PG8SBF, Size 447x472mm)
5
-
-
... More
Providing and fixing Towel Ring of required size including accessories and fittings complete to the wall etc. (Jaquar Make:-ACN-1121N)
114
-
-
... More
Providing and fixing Coat hook of required size including accessories and fittings complete to the wall etc. (Jaquar Make:-ACN-1161N)
105
-
-
... More
Providing and fixing Grab bar of 600mm long including accessories and fittings complete to the wall etc. (Jaquar Make:-AHS-1507)
101
-
-
... More
Providing and fixing Poly proplene piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 push-fit type having high impact and stiffness, having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, with all necessary fittings fitted with factory fitted lip ring.
110 mm dia pipe.
1820
-
-
... More
150 mm dia pipe.
280
-
-
... More
Providing and fixing PP white Trap with 50mm water seal with rubber seal on inlet to push fit hopper for indirect waste connections.
100 mm inlet and 100 mm out let
172
-
-
... More
Providing, fixing, testing and commissioning of pipe inlet fittings fabricated with PoloPlast Pipe with maximum 3 inlets 40, 50 & 75 mm OD size poloplast pipe, fixed to 'P' traps including Dripseal/Pipe seal/solvent weld joint/rubber ring joint complete .
305
-
-
... More
Providing and fixing sound insulated Poly proplene piping system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 push-fit type, having high impact and stiffness and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, with all necessary fittings fitted with factory fitted lip ring. (For Indirect waste/ Wash Basin/Urinal/Sink/Floor Drain )40mm(OD)
80
-
-
... More
50mm(OD)
280
-
-
... More
Providing and fixing clean out pipe (door piece) of POLO KAL NG for cleaning.110 mm OD
106
-
-
... More
160 mm OD
40
-
-
... More
Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4no, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe. Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat of specified shape, projecting 75mm outside the wall surface and fixed on wall with 4no, 6mm dia expansion hold fasteners including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats of specified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe.
353
-
-
... More
Total bracket length 810mm of approved shape and design (for two, 100mm dia pipes).
25
-
-
... More
Total bracket length 1040mm of approved shape and design (for three, 100mm dia pipes).
24
-
-
... More
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.Size 127 mm (Make Camty Cat. no CS-0
172
-
-
... More
Size 80 mm (Make Camty Cat. no N-03)
305
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having themetreal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. INTERNAL WORK - EXPOSED ON WALL 20 mm nominal outer dia .Pipes.
294
-
-
... More
25 mm nominal outer dia .Pipes.
588
-
-
... More
40 mm nominal outer dia .Pipes.
344
-
-
... More
32 mm nominal outer dia .Pipes.
344
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having themetreal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.CONCEALED WORK including cutting chases and making good the walls etc., 20 mm nominal outer dia .Pipes.
1194
-
-
... More
25 mm nominal outer dia .Pipes.
765
-
-
... More
32 mm nominal outer dia .Pipes.
18
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 32 mm nominal bore
40
-
-
... More
40 mm nominal bore
60
-
-
... More
50 mm nominal bore
80
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 25 mm nominal bore
14
-
-
... More
32 mm nominal
15
-
-
... More
40 mm nominal bore
18
-
-
... More
50mm nominal bore
14
-
-
... More
65mm nominal bore
18
-
-
... More
80mm nominal bore
12
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 19.16.125 mm nominal bore
198
-
-
... More
32 mm nominal bore.
32
-
-
... More
40 mm nominal bore
30
-
-
... More
50 mm nominal bore
1
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore
1
-
-
... More
25 mm nominal bore
1
-
-
... More
Painting G.I. pipes and fittings with synthetic enamel white paint over a red oxide zinc chromate priming coat, both of approved quality for new work: 25mm diametre pipe.
40
-
-
... More
32 mm diametre pipe.
60
-
-
... More
40 mm diametre pipe.
80
-
-
... More
50 mm diametre pipe.
70
-
-
... More
Extra for providing and fixing nitrile rubber insulation 6 mm thick to hot water pipe and fittings and valves as per manufacturer's recommendations complete to satisfaction of Engineer-in-charg20 mm nominal bore
692
-
-
... More
25 mm nominal bore
611
-
-
... More
32 mm nominal bore
98
-
-
... More
50 mm nominal bore
40
-
-
... More
65 mm nominal bore
30
-
-
... More
80 mm nominal bore
20
-
-
... More
Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
2
-
-
... More
Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confometreing to IS: 13095 of following sizes as required. 80mm dia
2
-
-
... More
SEWERAGE & DRAINAGE SYSTEMProviding and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe
25
-
-
... More
250mm dia R.C.C.Pipe
215
-
-
... More
Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
12
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diametre, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
2
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diametre, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :
2
-
-
... More
Extra for depth for manholes Size 90x80 cm
3
-
-
... More
Size 120x90 cm
1
-
-
... More
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg
10
-
-
... More
Providing and constructing brick masonry road gully chamber 50x45x60 cm with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design.
8
-
-
... More
Providing and constructing of Grease Trap 2100x1000x1750 mm (overall internal size ) with three compartments with inlet & outlet connection with Ist class bricks 230 mm thick wall in cement mortar 1:4 (1 cement: 4 coarse sand) inside and outside 12 mm thick plaster with cement mortar 1:3 ( 1cement : 3 coarse sand) with a floating coat of neat cement on inside surface , foundation concrete 1:4:8 (1 cement: 4 coarse sand :8 graded stone aggregate of 40 mm nominal size) 100 mm thick R.C.C baffle wall with 150x150 mm opening at 200 mm above invert level (Two no), 6 mm thick S.S.304 perforated tray of size 900x 400 mm size with two 10 mm dia S.S. rod of 800 mm long , and 8 mm thick M.S. plate cover (1000x500 mm 2 no) fixed on 40x40x6 mm size angle iron frame ,epoxy coated, with lifting arrangement fixed to first compartment, M.S. manhole cover 1000X500 mm for second compartment ,including necessary excavation backing filling ,disposal of surplus earth providing and fixing CI manhole steps , complete as per standard design and drawings.Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil
6.41
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
2.75
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
3.68
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil
6.41
-
-
... More
Ordinary or hard rock
2.75
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
0.87
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
2.68
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
0.8
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
10.85
-
-
... More
Steel reinforcement for RCC work including decoiling, straighening, cutting, bending, placing in position and binding all complete upto plinth level.TMT treated/ Hot rolled defometreed bars
64.05
-
-
... More
Construction of De-Silting Chamber including earth work in excavation in overarea, foundations in all kinds of soil/ordinary rock including all lifts and lead, backfilling, including PCC (1:4:8) work, masonry work, RCC M15 grade work in top slab including reinforcement, centering, shuttering, 12mm cement plastering (1:3) finished with a float coat of neat cement, as per techncial specifications, drawings, all complete.Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.All kinds of soil
20.8
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.2.7.1Ordinary rock
9
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
12
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil
21
-
-
... More
Ordinary or hard rock
9
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level ::4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
3.19
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
4.95
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
11.25
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
1.24
-
-
... More
Steel reinforcement for RCC work including decoiling, straighening, cutting, bending, placing in position and binding all complete upto plinth level.
62.2
-
-
... More
Construction of 3.0 m dia. recharge well consists of earth work in excavation upto 1.5 m in depth and 10 sqm on plan, filling, brick work with cement mortar of 1:4 , 12 mm thick plaster with floating coat with neat cement mix 1:3, laying and positioning of cement concrete of 1:4:8 with 1:2:4 precast reinforced cement concrete works complete as per standard design.Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil
36.4
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
15.6
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
20
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soil
36.5
-
-
... More
Ordinary or hard rock
15.6
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
2.3
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
27.01
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size).
1.38
-
-
... More
12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand)
22
-
-
... More
Steel reinforcement for RCC work including decoiling, straighening, cutting, bending, placing in position and binding all complete upto plinth level.TMT treated/ Hot rolled defometreed bars
101
-
-
... More
FRP. cover and frame (Load bearing 10 Ton) 600 mm internal diametre confometreing to EN 124 fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
4
-
-
... More
HEAT PUMPSupply, AIR to water heat pump following capacity at below mentioned operating conditions with CFC free refrigerant, Single / Multiple semi hemetreetic / Open compressors & circuits, driven by suitable KW Sq. Cage induction motor complete with air cooled condenser, insulated shell and tube condenser with victaulic coupling, refrigerant piping, Refrigerant and gas and Oil (First Charge), Microprocessor based control panel, factory mounted, motor starter & accessories etc. all mounted on M.S. frame. Motor shall be highly efficient and suitable for 415 volts ± 10%,50Hz ± 5 %, three phase A.C. supply.Ambient temperature : 15 degC (Minimum)Heating capacity : 50 kWHW IN : 50degCHW Out : 55degCCapacity 50 KW
1
-
-
... More
Providing, installation, testing and commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate The pump shall have mechanical seal. The pump shall be C.I casing,Bronze impeller, SS shaft and CI (Epoxy coated) base (suitable for hot water temperature).of 90 Deg CDomestic Hot Water Primary pumpsPumpFlow rate - 2000 LPHHead - 20 mtrs
2
-
-
... More
Providing, installation, testing and commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate The pump shall have mechanical seal. The pump shall be C.I casing,Bronze impeller, SS shaft and CI (Epoxy coated) base (suitable for hot water temperature).of 90 Deg CSecondary pumpFlow rate - 1000 LPH Head - 25 mtrs
2
-
-
... More
Providing, installation, testing and commissioning of following pumps suitable for 415 Volts connected with T.E.F.C. induction motor, M.S.channel, base plate The pump shall have mechanical seal. The pump shall be C.I casing,Bronze impeller, SS shaft and CI (Epoxy coated) base (suitable for hot water temperature).of 90 Deg C Return PumpFlow rate - 1000 LPHHead - 24 mtrs
2
-
-
... More
Supply, installation, testing and commissioning of Plate type heat exchanger with all accessories i.e.- valves, strainer, pressure & temperature gauges etc as per specifications complete in all respect as given belowAll Equipment should be complete with all accessories to complete the system and make it operational. : Capacity 25,000 Kcal / HrTemperature primary circuit.Inlet : 55 deg.COutlet : 60deg.C Temperature secondary circuit.Inlet : 45.0 deg.COutlet : 55 deg.C
1
-
-
... More
Hot Water Mixing Tank (BOH / GUEST AREA)Supply of Vertical Hot Water Storage Tank (cap.2500 liters.) fabricated from MS Plates plates suitable for minimum operating pressure of 4.5 kg/sq.cm.Hot water mixing tank complete with insulation, MS supporting structure with access ladder duly paint with red oxide. Operating pressure 4.5kg/sq cm, FOR GUEST ROOMWith Electrical Back up of 25 Kw
1
-
-
... More
Supply of Syntax Tank Capacity 500 LtsThe tank shall have level Indicator, 450 mm dia manhole with cover, vent, drain, over flow pipe complete. Butterfly Valve
1
-
-
... More
50 mm
24
-
-
... More
65 mm
6
-
-
... More
Check Valve65 mm
4
-
-
... More
50 mm
6
-
-
... More
32 mm
2
-
-
... More
Y Stainer32 mm
2
-
-
... More
50mm
4
-
-
... More
Ball Valve25 mm
4
-
-
... More
32 mm
2
-
-
... More
Saftey Valve 25 MM
2
-
-
... More
Auto Air Vent
2
-
-
... More
Dial type themetreometre
6
-
-
... More
Dial type pressure gauge
8
-
-
... More
"Interconnecting Piping")Providing of GI pipes (heavy class) and fittings confometreing to IS:1229 with all fittings eg, bends, elbows, tees, sockets, reducers, unions, flanges, 25 mm dia
10
-
-
... More
50 mm dia
40
-
-
... More
65 mm dia
20
-
-
... More
INSULATIONProviding tubing for hot water pipes (exposed / chases / burried locations), a elastomeric flexible material having hemetreetic blister closed cell structure of expanded synthetic rubber over pipes50 mm dia OD (13 mm thick outer dia)
40
-
-
... More
65 mm dia OD (13 mm thick outer dia)
20
-
-
... More
ELECTRICAL CONTROL PANEL FOR SOLAR INSTALLATION WORKSElectrical control panel for Heat pump Supply and pump operation,including control cable in plant room.CABLE & CABLE TRAYS
1
-
-
... More
Supplying & laying of following 1100 volt grade PVC insulated copper conductor ametreoured cables as per specification in existing trenches, cable trays ducts over bed of sand, clamped to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.3 core 2.5 sq. mm control cable
40
-
-
... More
Cablle tray 150 mm GI perforated
50
-
-
... More
Supplying & laying of following 1100 volt grade PVC insulated Aluminium conductor ametreoured cables as per specification in existing trenches, cable trays ducts over bed of sand, clamped to wall with suitable clamps, saddles fixing bolts including connecting testing and commissioning.4 core 6 sq. mm control cable
20
-
-
... More
Cable end temetreination of the following copper conductor ametreoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing facility and cable sockets etc. complete as required.3 core 2.5 sq. mm control cable
10
-
-
... More
EARTHING Earthing Wire
200
-
-
... More
SEWERAGE TREATMENT PLANSupplying, installation, testing & commissioning of Sewage Treatment Plant for the following duty (The Plant shall be automated with a central Control panel fully pre/site wired and with all power and control cables to all pumps and equipment including all instrumentation, level sensor other controls ).Nature of Sewage - Sewage from Guest House, Sector - 13 Dwarka, New DelhiDaily average flow - 50 cum/dayNature of effluent - SewageInfluent CharacteristicspH - 7-9 BOD5 - 300 mg/liter S. Solids - 300 mg/literCOD - 600 mg/literOil & Grease ` - 50 mg/literEffluent discharge standard pH - 7.0 - 7.5 : BOD5 - Less than 10 mg/liter S. Solids - Less than 10 mg/liter (1) Contractor shall ensure submission of detailed GA drawings (Plan & Section), P & I diagram, schematic diagram for the above mentioned components and additional components such as inserts, puddle flanges, vent pipes etc. if so required for the complete automatic working of the STP and have it approved by the Owner / Consultants. All Civil works finished with water proofing, plaster, snowcem, structure duly tested for leak-proofing, plant room flooring etc and related S.S/MS/CI works such as supply and fixing of handrails, manholes, gratings, grills, doors, vents, footrests etc complete in all respects.Equalisation Tank, SBR tank, Sludge holding tanks and Treated water tank complete aggregate cpacity=50 KL
50000
-
-
... More
Supply, installation, testing & commissioning of Screens2 notainless Steel Suitable Sized Manually operated Bar Screen made of SS 304Make: Doshion/Riasa/KWT/Ecologix
2
-
-
... More
Supply, installation, testing & commissioning of Submersible pumps with solid handling capacity upto 18 - 20 mm with CI casing & CI impeller complete with all accessories, motor of required capacity. The pumps shall be complete with Delivery header with, pressure gauge on delivery line with isolation level controller (with wiring) to control the level of Sump automatically. Pumps shall have following duty:Pumps = 02 no(1w + 1s)Pumps Capacity : 10 m3/hr @ 8-10 m headMake = KSB/Wilo/Ebara
2
-
-
... More
Supply, installation, testing & commissioning of Submersible Drain Pit Sump pumps with solid handling capacity upto 18 - 20 mm with CI casing & CI impeller complete with all accessories, motor of required capacity. The pumps shall be complete with Delivery header with, pressure gauge on delivery line with isolation level controller (with wiring) to control the level of Sump automatically. Pumps shall have following duty:Pumps = 02 no(1w + 1s)Pumps Capacity : 3 m3/hr @ 12 m headMake = Lubi/Wilo/Ebara
2
-
-
... More
Supply, installation, testing & commissioning of Fine Bubble Diffused Aeration SystemMake : OTT/ Rehau/Walkton
1
-
-
... More
Supply, installation, testing & commissioning of Coarse Bubble Diffuser, in EQT and SHT Tank with pipingMake : OTT/ Rehau/Walkton
1
-
-
... More
Providing and fixing all piping of required MOC as MS/GI/PVC/CPVC/UPVC and isolation control valves for making the system complete.
1
-
-
... More
Supply, installation, testing & commissioning of SBR Package, Automated system with Diffused aeration system comprises of Air Blowers of 70 m3/hr @ 0.5 kg/cm2, EPDM air diffusers and air grid in UPVC. Floating decanter shall be installed in reactor tank for decanted water extraction, MOC of decanter shall be SS-304. Inlet of sewage water decantation and aeration shall be automatic and PLC controlled with the help of automatic valves or by equipment arrangement. SBR cycle shall be auto controlled and continuous feedback level transmitter (Ultrasonic or Hydrostatic) shall be installed in reactor tank.. HMI shall be provided with PLC to make the system complete. Including Air Compressor For Decanter, 2 no Level Float Switch, DO transmitter, Hydrosttice pressure transducer for levcel measurement, Sludge Sump Level Switch, Pressure Gauges, Pressure SwitchMake: C-TECH/KWT/3SW
1
-
-
... More
Supply, installation, testing & commissioning of 2 no Roots Air Blowers ( one working & one standby) capable of delivering 50 m3/hr @ 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP suitable for 415 ± 10% volts, 3 phase, 50 cycles A.C. supply.- . Piping from Blower to SBR Tank And G.I fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports & clamps, puddle flanges etc Make = Everest/Usha/Beta
2
-
-
... More
Supply, installation, testing & commissioning of Sludge transfer pumps for sludge Feeding to filter press complete with all the accessories, motor of required capacity. The pumps shall be complete with Base frame, Delivery header with pressure gauge on delivery line . Pumps = 02 no(1w + 1s)Flow rate (each) = 1 m³/hrHead = 10-12 mMake - kirloskar/M&P/Ebara
2
-
-
... More
Supply, installation, testing & commissioning of Sludge feed pumps (Screw Pump) for sludge Feeding to filter press complete with all the accessories, motor of required capacity. The pumps shall be complete with Base frame, Delivery header with pressure gauge on delivery line . Pumps = 02 no(1w + 1s)Pump Capacity : 1 m3/hr @ 40 m Make - ROTO/UT Pumps
2
-
-
... More
Supplying, Installation, testing and commissioning of Chemical dosing system compromising of Sintex Tank with inlet/ outlet connection, piping and valves alongwith metreing pump for dosing. Make: Grundfos/Prominent/Riasa
1
-
-
... More
Supplying, installing, testing, commissioning of Centrifuge of suitable size for the dewatering of sludge generated per day with poly dosing system.Make: Humboldt/KWT/Alfa Laval
1
-
-
... More
Supplying, installing, testing & commissioning of centrifugal Pumps- CI body filter feed pumps & Treated water transfer pumps along with motor, pressure gauge with isolation cock, Isolation valve, NRV on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415±10% volts 3 phase AC supply.Filter feed pumps :Capacity : 3 cum/hrHead : 30 Mtrsno of Pumps (2 no – 1 W + 1 S)Make : Kirloskar/M&P/Ebara
2
-
-
... More
TERTIARY TREATMENTSupplying, installing, testing and commissioning of MSEP Vessel Dual Media filter with frontal piping and associated valves and accessories. Filter shall be suitable for minimum working pressure of 5 kg / cm2 and shall include media, standard fittings like pressure gauges, sampling cock, rinse drain, vacuum breaker etc. The MS sheet thickness for tank shall be min. 4mm and for dishess shall 5mm. The internal surfaces of tank shall be treated with rubber coating and external surface with primer and anticorrosive enamel paint (Min. 2 coats).Make: Doshion/Riasa/KWTDual Media Filter Anthracite & Sand Media basedFlow rate : 3 cum/hrFilteration velocity : 15 cum/hr/sqm
1
-
-
... More
Activated Carbon Filter with 800-900 Iodine Value Carbon.Flow rate : 3 cum/hrFilteration velocity : 15 cum/hr/sqm
1
-
-
... More
Supply, installing, testing & commissioning of ultravoilet dis-infection unit. The unit shall have over 99.9 % bacterial reduction from inlet to outlet. The dis-infection chamber shall be constructed of SS 316L on all welted parts. The UV lamp shall be of low pressure mercury vapour type with hard glass enclosure, the sockets shall be water tight & vibration resistant. The lamp life shall be rated for 9000 hours. The unit shall be complete with temperature safety control, lamp out alert circuit & UV radiometre with 4 – 20 mA output.ii)The UV unit shall have with reactor, cabinet housing, cabinet cooling, treatment chamber, electrical panel, temperature safety control, lampout alert, UV radiometre along with UV monitoring system and UV monitoring readout panel. The UV Dosage should be 30,000 uW – Sec / sq.cm. The lamps should be selected based upon the flow requirement of respective unit.Filteration velocity : 15 cum/hr/sqmCapacity : 3 m3/hmetreake : UV Alfa/Sukurt/3SWOUTGOING FEEDERS / STARTERSComplete for the STP equipments as described aboveSpares TP MCCB's - 2 noControl Panel as described above.
1
-
-
... More
Design, installation, testing and commissioning of the following integrated, cubicle type, dead front, extensible, sheet steel PLC based with touch screen & in built remote controling operation control panel anchoring to the foundation. The panel shall be suitable for 500 volts, 50 cycles, 4 wire, supply. Quoted price shall include, 25 mm thick rubber mats, wiring, cabling, cable tray, control wiring and copper earthing from control panel to various equipment like motor starters pump motors etc. The panel shall shall have separate compartments for bus bar and cable alleys. The following components and accessories shall be mounted within each control panel.Make: Vee/Adlec/Ambit i. One no 200 .amps TP incoming MCCB complete with the following:ii. 0-500 volts 96x96 square mm voltmetre with selector switch and fuses . 1 SETiii. 0-300 amps 96x96 square mm ammetre with 300/5 amps ratio CT's and selector switch 1 SETiv. Phase indicating lamps with toggle switches.iv. Indication lamps for ON/OFF/TRIP status of motors.Aluminium bus bar sleeves type, rated at …...amps for three phase & neutral.
1
-
-
... More
SUB HEAD-G (RAIN WATER HARVESTING SYSTEM)Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants &All types of soil machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level.300 mm dia.
20
-
-
... More
Rocky strata including Boulders300 mm dia
40
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, confometreing to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.200 mm nominal size dia.
20
-
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (metreS) pipes with ribs, confometreing to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia.
20
-
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
2.1
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
2.1
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer –in-charge.
2.1
-
-
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
1.6
-
-
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).200 mm dia
3
-
-
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar confometreing to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s pemetreanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
16
-
-
... More
DRIP IRRIGATION PVC Pipe & AccessoriePVC Pipe of size 63 mm X 6 kg/cm2 as per IS : 4985:P-0913
180
-
-
... More
PVC Pipe of size 50 mm X 6 kg/cm2 as per IS : 4985:P-0913
48
-
-
... More
PVC Pipe of size 40 mm X 6 kg/cm2 as per IS : 4985:P-0913
240
-
-
... More
16mm Inline lateral 2.4lph @30cm
200
-
-
... More
Pop- up Spray , Flow rate: 0.15lps . 5.2 - 2.4 M Radius, Adjustable Arc 0 to 360 Degree Hunter
75
-
-
... More
1/2" Pop up Connecting Assembly. The tubing shall be made of polyethylene having wall thickness of 2.3mm, a working pressure of 5.5 kg/cm2 at 43°C and a surge pressure of 16.6 kg/cm2. The fittings shall be made of UV resistant themetreo plastic.
75
-
-
... More
PVC/PP service saddles to mount the Swing Joints used for Sprinklers/nozzles. 63mm X 1''
7
-
-
... More
50mm X 1/2''
4
-
-
... More
40mm X 1/2''
71
-
-
... More
Valves & Accessories P/FPVC Ball Valve having flow indicator when lever is removed, security pivot to maintain lever in space, double water tight joint, direct injection stem non mechanical, with a base which pemetreits maximum penetration into the valve with teflon Seal.Ball Valve
6
-
-
... More
1'' QRC palstic
7
-
-
... More
QRC key
3
-
-
... More
P/F Valve boxes with cover on all valves. The valve box shall be heavy duty plastic with poly vinyl chloride reinforce and a green top. 10" Round Valve Box
6
-
-
... More
6" Round Valve Box
7
-
-
... More
P/FFilter
2
-
-
... More
Excavating Trenches of required width for pipes ,300 mm to 450mm
520
-
-
... More
P/F Flush Valve
4
-
-
... More
WATER SUPPLY PUMPS & EQUIPMENTS Domestic/Flushing Water Pump (Hydropneumatic System With Variable Speed Pumps)Providing, fixing and testing of skid mounted variables frequency drive hydropneumatic system with variable speed system comprising of :-Vertical, inline multistage centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast i.ron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply.Pressure vessel of non corrosive FRP composite construction lined with NSF and/or FDA listed material, like high density polyethylene with fully replaceable polyurethane. Air cell burst pressure of minimum of 5 times the vessel operating pressure and cycle tested for 2,50,000 cycles. no and capacity of Pressure Vessel – 01 no x 200 LtrsControl Panel with programmable logic controller (PLC) for cyclic operation of pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confimetre to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammetre & voltmetre. Control panel should also consist of cooling fan. Main incomer MCB, Outgoing MCBs, Single phase preventors complete with auto manual swiches, dry run protection arrangements,Voltmetre/Ametre, Indication lights, Controller for dry run protection.GI heavy class(IS:1239) Suction and delivery header with brass Ball valves with plastic coated handle(tested to 20kg/sqcm), Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. Brass NRVs (Test pressure =20 kg/sqcm) to be used should be with Springs and O-Ring arrangement.Pressure transmitting relay bellow type fitted with micro switch and having maximum pressure and differential scale should confimetreing BS-6134 standards and IP55 protection class.Complete set system to be mounted on a common base frame and shall follow following duty(Skid shall be powder coated ).Domestic Water Pumps(Set of Two Pumps One Working + One Standby) Capacity : app. 110 lpmHead : app. 40 m
1
-
-
... More
Soft Water transfer Pumps(Set of Two Pumps One Working + One Standby)Capacity : app. 110 lpmHead : app. 40 m
1
-
-
... More
Flushing Water Pumps(Set of Two Pumps one Working + One Standby)Capacity : app. 110 lpmHead : app. 40 m
1
-
-
... More
Drinking Water Pumps(Set of Two Pumps one Working + One Standby)Capacity : app. 50 lpmHead : app. 40 m
1
-
-
... More
Filter Feed Pump Providing, fixing and testing of skid mounted Fixed drive filter feed pumping system comprising of :-Horizontal centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast i.ron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply.Control Panele for cyclic operation of pumps. Pump working sequence should change after every operation.Contractor overload relays and MCBs should confimetre to IEC 898 – 1995/ specifications. Blinking indications for pumps start, trip, low level trip, health supply should be provided in the panel along with the ammetre & voltmetre. Control panel should also consist of cooling fan. Main incomer MCB, Outgoing MCBs, Single phase preventors complete with auto manual swiches, dry run protection arrangements,Voltmetre/Ametre, Indication lights, Controller for dry run protection.GI heavy class(IS:1239) Suction and delivery header with brass Ball valves with plastic coated handle(tested to 20kg/sqcm), Hot Pressed brass OT-58 with stainless steel ball and P.T.F.E seal and O-Ring. Brass NRVs (Test pressure =20 kg/sqcm) to be used should be with Springs and O-Ring arrangement.Complete set system to be mounted on a common base frame and shall follow following duty(Skid shall be powder coated ).Filter Feed Pumps (Set of Two Pumps One Working + One Standby) Capacity : app. 110 lpmHead : app. 30 m
1
-
-
... More
Providing and fixing horizontal centrifugal pumping set with stainless steel SS-304 stage casing and SS-304 impellers with stainless steel SS-316L shaft as per IEC standards and GJL250 cast i.ron suction & discharge casing, connected to TEFC ventilated induction motor of 2 pole, 2900rpm, suitable for 400/440 Volts, 3 phase, 50 Hz A.C. supply. Including control panel with startters, single phase preventor, Amperemetre, Voltmetre, incomer and outgoing MCBs, Copper bus bar, interconnecting wiring, dry run protection, GI suction and delivery pipe, vales, NRVs complete in all respects. (Set of two pumps Cap=400 LPM, Head=10 metre One working+one standby)
1
-
-
... More
Pressure Filter (Domestic Water)Providing and fixing vertical pressure filter with dual media filter (comprising of 600mm bed depth of graded sand gravel and 600mm bed depth of Anthracite) fabricated from high perfometreance M.S plate of minimum 8mm thick for shell & 10mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 kg/m2)Discharge : 6600 lphFiltration Rate : 10000 lit./m2/h Suggested dia app. : 1000 mm
1
-
-
... More
Activated carbon Filter (Domestic Water)Providing and fixing vertical activated carbon filter comprising of activated carbon filter media fabricated from high perfometreance M.S plate of minimum 8mm thick for shell & 10mm thick for dished ends with top and bottom flanged openings including top and bottom hub and lateral distribution and collection system complete with initial charge of filter media, face piping, valves, accessories, painting, testing and commissioning complete.(Tested to 6 kg/m2)Discharge : 6600 lphFiltration Rate : 10000 lit./m2/h Suggested dia app. : 1000 mm
1
-
-
... More
Water SoftenerProviding and fixing ‘Cation’ ION exchange water softener fabricated from minimum 8mm thick M.S. plate on shell and 10mm thick M.S. plate on dished ends complete with initial charge of filter media and ION exchange resins, face piping accessories, piping testing and commissioning complete with resins of approved quality and make and brine tank of required capacity. (Bidder must indicate type and quantity of resin used and quantity of salt required per regeneration).Minimum expected rate of flow: 6600 lph Total soft water to be produced between two regeneration: app. 66 Cu.m Expected raw water hardness : app. 500 ppmExpected treated water hardness: less than 100 ppmMax. working pressure : 4 kg/cm2 Total soft water to be produced between two regeneration: app. 10 Cu.m Expected raw water hardness : app. 500 ppmExpected treated water hardness: less than 100 ppmMax. working pressure : 4 kg/cm2 Total soft water to be produced between two regeneration: app. 10 Cu.m
1
-
-
... More
Providing and fixing M.S salt saturator, internally rubber lined as per requirement and externally painted with suitable anti-corrosive paint, with all required accessories for holding and supplying salt for softener complete in all respects, with electrically operated stirrer and of capacity 200 litres.
1
-
-
... More
Design, Fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre fabricated out of 14 gauge CRCA sheet steel. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 no earthing temetreinals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Quoted rates shall be inclusive of cables (from this panel to panel of Hydropneumatic system and filter feed pumps and flushing water pumps in accordance to specification) with earthing from panel to earthing pit.For domestic water hydro pumps, raw water pump, auto chemical doser and sump pumps etc. in plant room.Two incoming main isolation 100A TPN MCCB (35ka).32A TPN MCB outgoing for domestic RO/Soft water transfer pump-3 no32 A TPN MCB outgoing for Softener/filter feed pumps - 1 no32 A TP MCB of for each sump pumps - 4 noPanel type voltmetre 150mm with rotary selector switch for reading voltage between phases.Panel type Ammetre 150mm with rotary selector switch for reading currents between phases.Neon phases indicating lights on the incoming mains.All internal wiring colour coded from incoming mains to various switchgear, starter, metre, indicating lamp and bus bar. All the cable entry to the panel shall be from the top.(All for above from item (a) to (i) complete set). (The shop drawing to be prepared and approved before fabrication)
1
-
-
... More
Providing and fixing motor pump controller cum water level indicating panel in powder coated sheet metal box in 16 gauges M.S including the following:Electronic water level controller working on magnetic type sensing probes with necessary length of ametreored cable up to control panel froM UG tank and OH tank.Electronic minimum 4-level indicator with magnetic type sensing probes and necessary length of ametreored cable upto control panel.Arrangement of alternate switching mechanism for operational and standby pumps.For Water level indicators with following details:Underground tanksMinimum 4 level Multi level indicators with magnetic type sensor probes complete. (each UGT/OHT)
6
-
-
... More
Providing and fixing G.I. pipes (I.S. 1239 heavy duty class) complete with all necessary G.I. Fittings including all necessary fittings like bends, elbows, tees etc., either welded or screwed or flanged joints as per requirements, including all anchor blocks, anchor fasteners, couplings in all respects including enamel painting of required shade, cutting holes and chases in RCC wall and making good complete (The cost of flanges will be paid separately).100mm dia
45
-
-
... More
80mm dia
30
-
-
... More
Providing and fixing C.I double flanges suction strainer bucket type/ “Y” type including, nuts, bolts and 3mm thick rubber insertion complete.100mm dia
2
-
-
... More
80mm dia
2
-
-
... More
Providing and fixing butterfly valves, wafer end type class PN 1.0 as per I.S:13095 - 1991 or BS:5155, including necessary nuts, bolts, gaskets etc. complete (without gear box) 100mm dia nominal bore.
4
-
-
... More
80mm dia nominal bore.
4
-
-
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays Cross Member with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness
30
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
45
-
-
... More
Structural steel work riveted or bolted or welded in built-up sections,trusses and frames work upto a height of 5m above plinth level, includingcutting, hoisting, fixing in position and applying a priming coat of red oxidezinc chromate primer. kg
80
-
-
... More
Submersible pumps Providing, fixing and testing of Submersible single stage single entry pumps with C.I.body and C.I. two vane enclosed type impeller connected to TEFC submersible motor for 415 volts, 3 phase, 50 cycles including MCC panel with level controllers, auto control, sequential change over facility with one proper working at low level & two proper working at high level with an audible alametre including all interconnectivity cables, (one working+One Standby)MCB, copper bus bar, with both pumps connected to common outlet header including valves, non return valves, lifting chains etc. complete in all respect(Solid handiling capacity 12mm)Capacity - 225 lpm (each)Head - 12 m
4
-
-
... More
(For Basement Drain) (one working+One Standby)Capacity - 900 lpm (each)Capacity - 900 lpm (each)Head - 12 mHP (Approx) - 1.0 HP
1
-
-
... More
Providing, fixing, testing and commissioning of RO plant for capacity equal to 300l/hr drinking water comprising of High pressure pump, membrane, membrane housing compete in all respects.(Make:Pentair/Ion Exchange)
1
-
-
... More
Providing Fixing of Insulated 5000Lts SS Tanks ( Neropure , Nector or equivalent) as indicated on drgs , of required capacity including all lead and lift with fixing and fitting of appropriate SS stand to support the tank and all necessary fixtures and fittings .Tank shall be made of double wall fabricated from 2 mm thick SS 304 sheets for inner wall and .5 mm thick outer shell and 50 mm thick injected PUF insulation of 45 kg/m3 density. Quoted rates shall be for work on all heights / depths and levels including transportation, loading, unloading, stacking of required material at site etc. complete with supply of all materials, labour, T&P, taxes, tollage, royalties, scaffolding, testing of work done etc. complete.”
1
-
-
... More
FIRE FIGHTING GSupply, erection, jointing, testing & commissioning of "C" Class MS pipes (as per IS: 1239) including necessary specials such as tees, bends, flanges reducers etc., complete on wall/ ceiling. The pipes to be erected on wall or suspended from beams, RCC roof slabs with suitable size MS bars/ angle irons including painting of metal part except pipe line.50mm dia.
445
-
-
... More
65mm dia.
265
-
-
... More
80mm dia.
375
-
-
... More
100mm dia.
310
-
-
... More
150mm dia.
240
-
-
... More
Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation.
445
-
-
... More
65mm dia.
265
-
-
... More
80mm dia.
375
-
-
... More
100mm dia.
310
-
-
... More
150mm dia.
240
-
-
... More
Providing and wrapping 4 mm thick of approved make and quality bitumen based anti rust felt over MS pipe with overlap of 25 mm to make an impemetreeable layer including painting with one coat of bitumastic paint before felt complete. (Only on MS pipe to be laid in soil below ground). 80 mm dia
20
-
-
... More
100 mm dia
80
-
-
... More
150mm dia.
275
-
-
... More
Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confimetreing to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 80mm dia
2
-
-
... More
100mm dia
2
-
-
... More
150mm dia
4
-
-
... More
Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, confometreing to IS: 13095 of following sizes as required. 100mm dia
4
-
-
... More
150mm dia
15
-
-
... More
Providing and fixing brass GM/ ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 kg/ cm2 of approved quality as specified.25 mm dia
32
-
-
... More
50 mm dia
11
-
-
... More
Providing, fixing, testing and commissioning 50mm dia drain system in wet riser line with 50mm dia GM valve, necessary MS "C" class pipe line (upto 1 metre) and accessories complete as required.
3
-
-
... More
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia and with necessary G.I. coupling, valve to be fitted on top of Air vessel or on wet riser as per specification.
6
-
-
... More
Providing and fixing Flow switches suitable for fixing in 50mm to 150mm dia pipe line, complete with all accessories to provide indication in annunciator panel.
9
-
-
... More
Providing and fixing pressure switch with suitable for 1-10 kg/cm2 including 12/15 mm Ø isolation valve, G.I. nipple, elbow, electrical connections setting of Cut-In and cut-Off pressure complete in all respects and in an approved manner.
7
-
-
... More
Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe,elbow etc. as per requirement in approved manner.
39
-
-
... More
Providing and fixing 15 mm dia, Quartzoid bulb type G.M. Sprinkler Head set to operate at 680C of approved make chrome plated complete in all respect as required.
745
-
-
... More
Supplying and fixing swinging type First-Aid Hose Reel drum with MS construction spray painted in Post office Red colour, confometreing to IS: 884 with upto date amendments, complete with brackets for fixing on wall, connections from riser with 25 mm dia MS/GI pipe and GM gate valve but excluding hose reel.
21
-
-
... More
Supplying and fixing 19mm dia 30 metre long high pressure polypropylene First-Aid Hose Reel.
21
-
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked confometreing to IS: 5290 (Type - A) with blank Gunmetal cap and chain as required.
21
-
-
... More
Supplying and erecting orifice plate having 6 mm thickness, 140 mm outer dia at every single outlet hydrant valve as per specification.
39
-
-
... More
Supplying and fixing 63 mm dia, 15 mtr long Flax canvas hose pipe with 63 mm dia Male and Female Stainless Steel-IS: 3444 Grade-1 couplings duly binded with GI wire, rivets etc. confometreing to IS: 636 (Type -A) as required.
54
-
-
... More
Supplying & fixing 63 mm dia Stainless Steel IS: 3444 Grade-1 branch pipe with 20 mm dia (nominal internal) Gun Metal nozzle confometreing to IS: 903, suitable for instantaneous coupling connection to connect hose pipe coupling as required.
27
-
-
... More
Supplying and fixing of MS hose cabinet box of made of 2 mm thick MS sheet and 40 x 40 x 5mm angle iron with front openable cover having 6 mm thick glazed glass viewing window i/c necessary locking arrangement, on existing wall/ brick platfometre etc complete as required. Size 1800 mm x 900 mm x 500 mm
21
-
-
... More
Size 600 mm x 600 mm x 500 mm
6
-
-
... More
Providing and fixing fire brigade 63mm dia GM suction coupling to 100/150 mm dia suction pipe complete.
1
-
-
... More
Supplying and fixing 4 way Fire Brigade Connection of cast iron body with 4 no Gun metal male instantaneous inlet couplings complete with cap and chain confometreing to IS: 904 including connection to existing MS pipe line complete as required.
1
-
-
... More
Supplying and fixing 2 way Fire Brigade Connection of cast iron body with 2 no Gun metal male instantaneous inlet couplings complete with cap and chain confometreing to IS: 904 including connection to existing MS pipe line complete as required.
1
-
-
... More
Providing and fixing standard fireman's axe (tested for 20000 Volts) with heavy insulated rubber handle. (ISI marked)
21
-
-
... More
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling welding including cost of steel fasteners, clamp in RCC structural members as directed, including two coat of enamel painting over one coat of red oxide primer complete.
500
-
-
... More
Supplying and installing Air Vessel of 300 mm dia, 1.5m in height made of 5mm thick MS sheet including painting with one primer and two finish coats complete as per specification.
2
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe confometreing to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25mm dia
2455
-
-
... More
32 mm dia
305
-
-
... More
40 mm dia
280
-
-
... More
200 mm dia (wall thickness 6.3 mm)
15
-
-
... More
250 mm dia (wall thickness 6.3 mm)
10
-
-
... More
Supplying and fixing Single headed external yard hydrant valve with 1 no 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, confometreing to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Gunmetal
6
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confometreing to IS 13095 of following sizes as required :200 mm dia
2
-
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confimetreing to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :200 mm dia
1
-
-
... More
250 mm dia
1
-
-
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.200 mm dia
2
-
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Horizontal side wall sprinkler
179
-
-
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.
745
-
-
... More
Supplying, installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alametre, drip and drain valve with water motor gong complete as required.80 mm dia
1
-
-
... More
Providing, installation, testing & commissioning of water curtain nozzle 15mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.
5
-
-
... More
Providing, installation, testing & commissioning of electric release trim assembly for deluge wall with two way solelnoid valve, weather proof operation on 24 volts DC supply complete as required.
1
-
-
... More
Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.
745
-
-
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 M including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cms in depth including filling jamuna sand alround, consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil outside the site.Pipes, cables etc.exceeding 80 dia but not exceeding 300 mm dia.
376
-
-
... More
FIRE PUMPS AND ACCESSORIESSupplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal confometreing to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine confometreing to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads.2280 lpm at 70 m Head
1
-
-
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confometreing to IS 1520Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confometreing to IS-325.M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 70 m Head
2
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal confometreing to IS : 1520.Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confometreing to IS : 325.M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads.180 lpm at 70 m Head
3
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vemetrein proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth temetreinals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmetre 0-500V with selector switch2 Jockey Pump 100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
Ammetre (0-400 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
Set of Copper Bus Bar 500AOutgoings
( Note : All outgoing feeders for pumps should have
digital Ammetre with selector switches, and LED type
ON, OFF, trip indicating lamps)2 Main Fire Pump
200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Diesel Engine Control
Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt metre, and 0- 20 A DC Ammetre All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications.
1
-
-
... More
Providing and fixing resilient rubber lined neoprene single arch vibration eliminators with unit control suitable for fire pump upto 450 C. Temperature working pressure 20 kg per square centimetre .100 mm dia
4
-
-
... More
150 mm dia
6
-
-
... More
Supply & Fixing ISI marked (IS:13849) Portable Fire Exitnguisher, ABC type capacity 6 kg, finished externally with red enamel paint, complete in all respects including initial fill and wall suspension. Capacity 6 kg
35
-
-
... More
Supply & Fixing ISI marked (IS:2878) Portable fire Extinguisher, Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long & complete in all respects including initial fill with C02 gas confimetreing to IS:307-1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 4.5 kg
35
-
-
... More
Supply & Fixing ISI marked (IS:10204) Poratable Fire Exitnguisher,Trolley mounted Mech. Foam type capacity 09 ltrs with gun-metal cap and nozzle and complete respects in all respects including initial fill and wall suspension.
Capacity 9.0 ltrs
1
-
-
... More
Supply & Fixing of ISI marked (IS:2878) Fire Extinguisher, Trolley mounted, CO2 (gas pressure) type capacity 22.5 kg with gun-metal cap. And nozzle and complete in all respects including initial fill and wall suspension bracket.
Capacity 22.5 kg
2
-
-
... More
FURNITURE CENTER TABLE (A TYPE)Providing and placing in position Glass top central table in specified shape 10mm th. glass with 6 MM. Bevling,rest on a frame made of 65 mm. X 65mm. and 40mm. X40mm. teak wood member with carving work finished in melamine finish polish. as per Architectural Drawings and DetailSize 1200mm.(L) X 1200mm.(W) X 450mm.(H)
6
-
-
... More
CENTER TABLE (B TYPE)Providing and placing in position Glass top central table in specified shape 10mm th. glass with 6 MM. Bevling,rest on a frame made of 65 mm. X 65mm. and 40mm. X40mm. teak wood member with carving work finished in melamine finish polish. as per Architectural Drawings and DetailSize 1125mm.(L) X 525mm.(W) X 450mm.(H)
52
-
-
... More
CONFERENCE TABLE Providing and Placing in position of U-Shape confrence table made out of 19mm thick commercial board, top, front and side apron shall be finished with 4.0 mm.thick approved VENEER as mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing. all exposed surface and inside shall be finished with melamine polish and internal surface shall be finished with sythentic enamel paint with necessary hardware and locks. as per Architectural Drawings and Detail Size:- 13000mm.X750mm.X750mm.
1
-
-
... More
CONFERENCE CHAIRS Providing and Position chairs made out of 40mm x 60mm 1st class quality T.W. frame work for seat made to desired shape & design, 12 mm moulded ply base provided with 75mm thick foam in seat upholstered in fabric,(cast out of fabric not exceeding rs.550metre) all wood work shall be finish in melamine matt finish polish complete as per Architectural Drawings and Detail
38
-
-
... More
DINNING TABLE (6 SEATER) COMMON DINNINGProviding and Placing in position of Rectangular Shape Dining Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 1.5 mm.thick approved laminate as mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing. internal surface shall be finished with sythentic enamel paint with necessary hardware and locks. as per Architectural Drawings and DetailSize 2000mm.X 900mm.X 750mm.
7
-
-
... More
DINNING TABLE (6 SEATER) VIP DINNING Providing and Placing in position of Round Shape Dining Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 4.0 mm.thick approved VENEER mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing.all exposed surface and inside shall be finished with melamine finished polish and internal surface shall be finished with sythentic enamel paint with necessary hardware and locks. as per Architectural Drawings and Detail.Size 2000mm.X 900mm.X 750mm.V.I.P Dinning AREA at Ground Floor
6
-
-
... More
DINNING TABLE (4 SEATER) COMMON DINNING And 2&1 bhk. Providing and Placing in position of Rectangular Shape Dining Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 1.5 mm.thick approved laminate as mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing. internal surface shall be finished with sythentic enamel paint with necessary hardware and locks. as per Architectural Drawings and Detail
14
-
-
... More
DINNING TABLE (4 SEATER)VIP DINNING , VIP SUITE & SUITEProviding and Placing in position of Round Shape Dining Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 4.0 mm.thick approved VENEER mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing.all exposed surface and inside shall be finished with melamine finished polish and internal surface shall be finished with sythentic enamel paint with necessary hardware and locks. as per Architectural Drawings and Detail.
5
-
-
... More
Providing and Placing in position of Round Shape Dining Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 4.0 mm.thick approved VENEER mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing.all exposed surface and inside shall be finished with melamine finished polish and internal surface shall be finished with sythentic enamel paint with necessary hardware and locks. as per Architectural Drawings and Detail.Size:- 1150mm.X 900mm.X750mm.
4
-
-
... More
V.I.P. SUITE ROOM - DINING Providing and Placing in position of Round Shape Dining Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 4.0 mm.thick approved VENEER mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing.all exposed surface and inside shall be finished with melamine finished polish and internal surface shall be finished with sythentic enamel paint with necessary hardware and locks.as per Architectural Drawings and Detail.Size:- 1050 MM.Ø
6
-
-
... More
FIRST AID ROOM & H.M. ROOM TABLEProviding and Placing in position of Rectangular Shape office Table made out of 19mm thick commercial board, top, front and side apron shall be finished with 4 mm.thick approved veneer as mention in the drawings with 50 x40mm teak wood moulding finished with malemine finish polish as specified in drawing. and internal surface shall be finished with sythentic enamel paint with necessary hardware and locks.as per Architectural Drawings and Detail.Size:- 1350mm.X 675mm.X750mm.DOCTOR TABLE
1
-
-
... More
H.M. TABLE
1
-
-
... More
DINNING CHAIRS (VIP DINNING , VIP SUITE & SUITE)Providing and Position chairs made out of 40mm. x 60mm. 1st Class Quality T.W. Frame work for seat made to desired shape & design, 12 mm moulded ply base provided with 75mm thick foam in seat upholstered in fabric,(Cast out of fabric not exceeding Rs.550metre) all wood work shall be finish in melamine finish polish complete as per Architectural Drawings and Detail.Size:- 450 mm.X450 mm.X 950mm.
94
-
-
... More
DINNING CHAIRS ( COMMON DINNING And 2&1 bhk. )Dining chair designed as without ametrerest. The seat is made of hot pressed moulded 12 mm thick plywood upholstered with foam density 40kg/m3 & leatherite tapestry. Back is made of CRCA PIPE size 20mm x 10mm x 1.6mm Metal frame upholstered with foam density 32kg/m3 & leatherite tapestry. The main frame made of SS 202 grade pipe size 30mm x 15mm x 1.5mm in capsule shape . There are use of PPCP shoes for avoid skretches from the floor.Seat size shall be -16”(W),17”(D) Back size-18” (H) and overall height 34.5" from floor.Size:- 450 mm.X450 mm.X 950mm.
82
-
-
... More
COFFEE CHAIRProviding and Position chairs made out of 40mm. x 60mm. 1st Class Quality Teak wood Frame work for seat made to desired shape & design, 12 mm moulded ply base provided with 75mm thick foam in seat upholstered in fabric,(Cast out of fabric not exceeding Rs.550metre) all wood work shall be finish in melamine finish polish completeas per Architectural Drawings and Detail.Size 500mm.X500mm.X950mm.
146
-
-
... More
COFFEE TABLEProviding and Placing position glass top cofee table in specified shape 10mm th. Glass with 6 mm. bevling, rest on a frame made of 65 x 65 mm. and 40 mm x 40 mm teak wood member finished in melamine finish polish.as per Architectural Drawings and Detail.Size 525Ø mm diametre
80
-
-
... More
SOFA (3 SEATER)Providing and Placing in position Fully uphostered Sofa made out of 125mm & 75mm size springs, minimum @2kg/seat ,taat, 25mm th.40 dencity sleepwell foam, 50mm th.rubber below hands etc.all work shall be covered by white markin over 10 to 40 mm thick foam as per architects instruction. seat shall be covered by approved cloth (basic rate of 850/sqmt.) over 100mm thick cool foam rubber, all exposed surfaces shall be finished by melamine polished / duco paint as per approval.the rate are included all necessary hardware such as nails, adhesives etc.as per Architectural Drawings and Detail.Size 2000mm.X750mm.X750mm.
57
-
-
... More
SOFA (2 SEATER)Providing and Placing in position Fully uphostered Sofa made out of 125mm & 75mm size springs, minimum @2kg/seat ,taat, 25mm th.40 dencity sleepwell foam, 50mm th.rubber below hands etc.all work shall be covered by white markin over 10 to 40 mm thick foam as per architects instruction. seat shall be covered by approved cloth (basic rate of 850/sqmt.) over 100mm thick cool foam rubber, all exposed surfaces shall be finished by melamine polished / duco paint as per approval.the rate are included all necessary hardware such as nails, adhesives etc.as per Architectural Drawings and Detail.Size 1500mm.X750mm.X750mm.
8
-
-
... More
SOFA (1 SEATER)Providing and Placing in position Fully uphostered Sofa made out of 125mm & 75mm size springs, minimum @2kg/seat ,taat, 25mm th.40 dencity sleepwell foam, 50mm th.rubber below hands etc.all work shall be covered by white markin over 10 to 40 mm thick foam as per architects instruction. seat shall be covered by approved cloth (basic rate of 850/sqmt.) over 100mm thick cool foam rubber, all exposed surfaces shall be finished by melamine polished / duco paint as per approval.the rate are included all necessary hardware such as nails, adhesives etc.as per Architectural Drawings and Detail.Size:- 800mm.X 750mm.X 750mm.
59
-
-
... More
SOFA SIDE TABLEProviding and Placing in position Sofa side tables made of 19 mm. thick board with 4mm.VENEER finish resting on teak wood finished in melamine finish polish.as per Architectural Drawings and Detail.Size 500mm. X 500mm.X 525mm.
88
-
-
... More
SINGLE BED (TWIN)Providing and Fixing Bed ( without box)to fit mattress of following sizes. Teak wood framework fo size 50mm x 50mm and vertical side faces 25mm.x125mm. Bed Top of 12mm thick Ply. Exposed sides finised with veneer all complete as per Architectural Drawings and Detail.Size:- 1900mm(L) X 1050mm (W) X 450mm (H)
156
-
-
... More
SINGLE BED SIDE TABLE Providing and Placing in position Sofa side tables made of 19 mm. thick board with 4mm.VENEER finish resting on teak wood finished in melamine finish polish.with drawers as per Architectural Drawings and Detail.Size:- 500 mm.(L) X 475mm.(W) X 450mm.(H)
230
-
-
... More
VISITOR CHAIRProviding and Position chairs made out of 40mm x 60mm 1st class quality Teak wood frame work for seat made to desired shape & design, 12 mm moulded ply base provided with 75mm thick foam in seat upholstered in fabric,(cast out of fabric not exceeding rs.550metre) all wood work shall be finish in melamine matt finish polish complete as per Architectural Drawings and Detail.Size:- 450 mm.X450 mm.X 900 mm.
8
-
-
... More
PATIENT BED Providing and Fixing Bed (Without Box)to fit mattress of following sizes.Teak wood framework fo size 50mm x 50mm and vertical side faces 25 x 125mm. Bed top of 12mm thick ply. Exposed sides finised with laminate all complete as per Architectural Drawings and Detail.Size:- 1950 mm.X850mm.X600mm.
1
-
-
... More
RECEPTION TABLE ( LOBBY )Providing and placing in position Semi Circular ReceptionTable along with back unit of size upto 8.0 x 0.9 x 1.15m made out of teakwood frame of adequate section 50x50mm wih 9mm thick commercial ply finish with 1.5 mm thick approved laminate, middle table top of 25 mm thick Commercial Board finish with 1.5mm thick approved laminate finish and keyboard tray and drawer finish with1mm. Thick Ss.laminate finish as per Architectural Drawings and Detail.Size:- 8000 mm. X 900 mm. X1150 mm.
1
-
-
... More
RECEPTION TABLE ( COMMON DINING )Providing and placing in position Semi Circular ReceptionTable along with back unit of size upto 1.2x 0.75 x 1.10m made out of teakwood frame of adequate section 50x50mm wih 9mm thick commercial ply finish with 1.5 mm thick approved laminate, middle table top of 25 mm thick Commercial Board finish with 1.5mm thick approved laminate finish.skirting finished with 1mm. Th. Ss.laminate finish as per Architectural Drawings and Detail.Size :- 1500mm. X 750 mm. X 1100 mm.
1
-
-
... More
STUDY TABLEProviding and Placing in position Study table made out of 19mm thick commercial board. All exposed side finish with 4.0 mm thick approved veneer finish as per detail with teak wood moulding and skirting complete with polish and inside surface finised with syenthetic enamel paint in study table drawers and key board to be provided with godrej make multipurpose single locks with maste key including provision for CPU and storage etc. with necessary hardware like locks, hinges, handles, nob etc.as per Architectural Drawings and Detail. Size:- 1000mm.X 550 mm.X 750 mm.
77
-
-
... More
STUDY CHAIRProviding and Position chairs made out of 40mm x 60mm 1st class quality Teak wood frame work for seat made to desired shape & design, 12 mm moulded ply base provided with 75mm thick foam in seat upholstered in fabric,(cast out of fabric not exceeding rs.550metre) all wood work shall be finish in melamine matt finish polish complete as per detailed drawing as per Architectural Drawings and Detail.Size:- 450mm.X 450mm.X 900mm.
77
-
-
... More
T.V UNIT Providing and fixing TV Unit panelling comprising of 4.0mm thick veneer of approved make, shade and colour fixed over 18mm thick BWP commercial ply. The ply shall be fixed over approved hard wood frame and drawer & shelf provided as indicated in the drawings. The frame shall be anchored to the wall by means of wooden cleats, SS screws etc. The panelling shall also incude shelf made of 18mm thick commercial ply with veneer of approved make, shade and colour fixed on both sides. The dimensions of the shelf shall be as indicated in the drawings. Rates shall incude provision of lights, electrical points, all hardware, melamine polished teak wood moulding on all exposed edges etc all complete as per Architectural Drawings and Detail.Size:- 1500 mm.X 2100 mm.
26
-
-
... More
Size:- 1350 mm.X 2100 mm.
87
-
-
... More
CABINETProviding and fixing wardrobes of size 1100mm(L) x 600mm (H) x 2400mm (D) and locations as indicated in the drawings. The carcass shall be made from 18mm thick commercial BWP Ply with 4.0 mm thick veneer of approved make, shade and colour. The ply shall be fixed to the wall surface by means of wooden cleats, SS screws etc. The shutters shall be made from 19mm thick commercial board finished on outer side with 4.0 mm thick veneer and inner side with 1.0 mm. thick laminate of approved shade over wooden primer fixed with SS Piano hinges. The shutters shall be provided with 150mm long SS Handles of approved make and design, 300mm long tower bolts and cupboard lock.The wardrobe shall comprise of open shelves made from 19mm thick commercial board finished with 4.0 mm thick veneer. SS hanging rode 25mm dia shall also be provided and 5mm thick Mirror on cabinate shutter .Rates shall include the cost for melamine polished teak wood moulding on all exposed sides.as per Architectural Drawings and Detail.
110
-
-
... More
LUGGUAGE RACKProviding and fixing Luggage rack of size 1100 (L) x 600 (D) x 2400mm (H) made from 19mm thick commercial board finished with 4.0 mm thick veneer fixed on both sides. Open shelves of dimensions as indicated in drawings made from 19mm thick commercial board laminated on both sides. The top of luggage rack shall be provided with 19mm thick pre polished granite stone of approved shade and colour. Rates shall be includive of all hardware as per Architectural Drawings and Detail.
95
-
-
... More
TEA TABLEProviding and fixing TEA TABLE of size 900 (L) x 450 (D) x 1000mm (H) made from 19mm thick commercial board finished with 4.0 mm thick veneer fixed on both sides. Open shelves,drawer of dimensions as indicated in drawings made from 19mm thick commercial board and veneer .The top of Tea Table shall be provided with 19mm thick pre polished granite stone of approved shade and colour. Rates shall be includive of all hardware as per Architectural Drawings and Detail.Size:- 900mm.X450 mm.X1000 mm.
89
-
-
... More
DOUBLE BEDProviding and Fixing Bed ( Without Box) to fit mattress of following sizes. Teak wood framework of size 50mm. x 50mm. and vertical side faces 25 x 125mm. Bed top of 12mm thick ply. Exposed sides finised with veneer all complete as per Architectural Drawings and Detail.Size:- 1950mm.(L) X1850 mm.(W) X 450 mm.(H)
19
-
-
... More
DOUBLE BED SIDE TABLE Providing and Placing in position Sofa side tables made of 19 mm. thick board with 4mm.VENEER finish resting on teak wood finished in melamine finish polish.Open shelves,drawer of dimensions as indicated in drawings made from 19mm thick commercial board and veneer Size:- 600mm.(L) X 475mm.(W) X 450mm.(H)
38
-
-
... More
Main curtain , Sheer+Black out fabric + Stiching(Main curtain59%Polyster 41% cotton,Sheer curtain 100% polyster , Black out lining 100% Polyster with complete stiching)As per Annexure 1000MM X 2400MM
6
-
-
... More
DW/ 7800X2400
1
-
-
... More
D2/ 100X2400
2
-
-
... More
D1/ 2000X2400
15
-
-
... More
D2 1500X2400
27
-
-
... More
D3 1100X2400
6
-
-
... More
D4/ 1000X2400
112
-
-
... More
D5/ 900X2400
63
-
-
... More
D6/ 825X2400
5
-
-
... More
D7/ 750X2400
136
-
-
... More
D8/ 700X2400
69
-
-
... More
W/ 3000X1500
9
-
-
... More
W1/ 2000X1500
37
-
-
... More
W2/ 1500X1500
179
-
-
... More
W3/ 1200X1500
10
-
-
... More
W4/ 750X1500
1
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)As per Annexure )D/ 1000MM X 2400MM
6
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.) DW/ 7800X2400
1
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D/ 2100X2400
2
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D1/ 2000X2400
15
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D2/ 1500X2400
27
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D3 1100X2400
6
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D41000X2400
112
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D5900X2400
63
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D6825X2400
5
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D7/ 750X2400
136
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)D8/ 700X2400
69
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)W 3000X1500
9
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)W1/ 2000X1500
37
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)W3/ 1500X1500
179
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)W3/ 1200X1500
10
-
-
... More
Curtain rod (25 mm Brass weight 125gm/Ft With side brackats etc.)W4/ 750X1500
1
-
-
... More
Bed Sheet Single 300 TC Stripe White(with 1 Pillow Cover)
190
-
-
... More
Bed Sheet Double 300 TC Stripe White (with 2 Pillow Covers)
25
-
-
... More
Polyfill Pillows 18"x27"
240
-
-
... More
Door Mat (59cmx85cm)As per annexure(
180
-
-
... More
Mattress (40 D Foam) 1900mmx1050mm
190
-
-
... More
Mattress (40 D Foam) 1950mmx1850mm
25
-
-
... More
Roller Blinds (250 Sq Ft) Roller Screen 5%
250
-
-
... More
WALLPAPER (57.6sqft=perRoll)As per AnnexureVIP SUITE ROOM
30
-
-
... More
WALLPAPER (57.6sqft=perRoll)As per AnnexureGUEST ROOM-1
130
-
-
... More
WALLPAPER (57.6sqft=perRoll)As per AnnexureGUEST ROOM -2
130
-
-
... More
WALLPAPER (57.6sqft=perRoll)As per AnnexureRECEPTION
6
-
-
... More
WALLPAPER (57.6sqft=perRoll)As per AnnexureVIP DINING CONFERENCE
10
-
-
... More
Green Building Rating and Certification Consultancy Charges
1
-
-
... More
WIRING SYSTEM
Wiring for light/ fan/ exhaust fan / call bell point with 1.5 sqmm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, with 5 amp modular switch, modular base and cover plate, suitable size G.I. box and earthing the point with same size cable as required.
Short Point
500
-
-
... More
Medium Point
2800
-
-
... More
Long Point
300
-
-
... More
Wiring for twin control light point with 1.5 sqmm FR PVC insulated stranded copper conductor single core cable in concealed PVC conduit, with 5 amp modular switch, modular base and cover plate, suitable size G.I. box and earthing the point with same size cable as required.
115
-
-
... More
Extra for providing and fixing light plug point on board in concealed PVC conduit point wiring with modular type 3 pin 5 amp socket outlet and 5 amp switch including cost of base and cover plate and G. I. box etc. as required.
300
-
-
... More
Wiring for light plug point with 2x2.5 sq mm FR PVC insulated stranded copper conductor cable in concealed PVC conduit along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size cable etc. as required.
Short Point
50
-
-
... More
Medium Point
800
-
-
... More
Long Point
100
-
-
... More
Wiring for power plug point with 2x4 sq mm FR PVC insulated stranded copper conductor cable in concealed PVC conduit along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size cable etc. as required.
Short Point
50
-
-
... More
Medium Point
500
-
-
... More
Long Point
100
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in concealed PVC conduit as required.3 X 1.5 sq. mm in 20mm conduit
2000
-
-
... More
3 X 2.5 sq. mm in 20mm conduit
9000
-
-
... More
6 X 2.5 sq. mm in 25mm conduit
4800
-
-
... More
9 X 2.5 sq. mm in 32mm conduit
3000
-
-
... More
3 X 4 sq. mm in 25mm conduit
9500
-
-
... More
3 X 6 sq. mm in 25mm conduit
250
-
-
... More
6 X 10 sq. mm in 40mm conduit
1500
-
-
... More
6 X 16 sq. mm in 50mm conduit
1500
-
-
... More
Supplying and fixing of following sizes PVC conduit along with accessories in concealed complete as required.
20 mm
1000
-
-
... More
25 mm
8585
-
-
... More
32 mm
2000
-
-
... More
SWITCHES & ACCESSORIES
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
75mmX75mm (1/2 Module)
355
-
-
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
1 Module
305
-
-
... More
2 Module
50
-
-
... More
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
Fan regulator (two module size) electronic stepped type moving all rounds
275
-
-
... More
Telephone socket outlet
120
-
-
... More
T.V. antenna socket outlet
115
-
-
... More
Ceiling rose 3 pin 5 amp
122
-
-
... More
6 pin 20 amp socket outlet
10
-
-
... More
25 amp A.C. Starter switch
5
-
-
... More
Computer Outlet Jack
20
-
-
... More
DND & MMR Indoor & Outdoor Units with indicator
77
-
-
... More
25Amp Key Fob Switch with 30sec time delay
77
-
-
... More
Single Port USB Socket
144
-
-
... More
Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 no 3 pin 6 amp socket outlets, 3 no 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as required.
10
-
-
... More
Supplying and drawing following pair 0.5 mm FR PVC insulated copper conductor, unametreored telephone cable in the existing surface/ concealed steel/ PVC conduit as required.
2 Pair
500
-
-
... More
Supplying and drawing UTP 4 pair Cat 6 LAN cable in existing surface/ concealed steel/ PVC conduit as required.
18000
-
-
... More
Supplying and drawing following grade co-axial TV cable PVC insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed steel/ PVC conduit as required.
RG-6 grade
2500
-
-
... More
RG-11 grade
500
-
-
... More
Supplying and fixing 2 pole and earth, 240 volts, industrial type, socket outlet, enclosed metal plug top along with SP MCB in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
20 Amp with “C” curve MCB
5
-
-
... More
Supplying and fixing of IP 55 protection watertight and dust proof surface mounted PVC modular box & adaptor for 16A Switch , 6/16A Socket with connections complete as required.
5
-
-
... More
Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as required.
275
-
-
... More
S.H -II FANS, LUMINARIES AND LAMPS
Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable, earthing etc. complete as required.
1200 mm sweep
275
-
-
... More
Supplying, installation, testing and commissioning of following sizes fancy exhaust fan having built in lovers in existing opening in wall including earthing etc. complete as required.
300 mm sweep
110
-
-
... More
Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as required. (If provided at the time of installation of ceiling fan)
275
-
-
... More
Supplying, installation, testing and commissioning of following Recessed/Surface Mounted LED fitting (luminaries) down lighters/battens in round/ square shape/ complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as required and furnishing 3 Yrs Guarantee certificate from manufacturer.
36W LED Batten
100
-
-
... More
20W LED Tube
400
-
-
... More
14W LED Magma Batten
80
-
-
... More
38.6W 2'x2' Slim Panel
25
-
-
... More
6W COB
50
-
-
... More
9W COB
590
-
-
... More
10W LED Slim Panel
400
-
-
... More
15W LED Slim Panel
700
-
-
... More
LED Strip (Per 5 Mtrs)
1050
-
-
... More
LED Strip driver
257
-
-
... More
Bracket Light (LED TYPE)
185
-
-
... More
S.H -III- DBs
Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board consumer unit of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator)
2 + 8 way
8
-
-
... More
Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as required. (But without MCB/RCCB/Isolator)
4 way Double door
16
-
-
... More
6 way Double door
8
-
-
... More
8 way Double door
1
-
-
... More
Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.
6 amps to 32 amps
424
-
-
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
8
-
-
... More
63 amps
17
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
8
-
-
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
5
-
-
... More
Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board consumer unit of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as required. (Room DB)
DB with 1-25 amp. DP 10 kA MCB as incoming and outgoings 20A DP MCB-1no, 16A DP MCB along with contactor and connector strip-1no, 16A SP MCB-1no and 20A SP MCB-1 no 'C' category with themetreal magnetic protective releases out goings.
77
-
-
... More
S.H -IV- EARTHING
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as required.
6
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 metre depth below ground level including excavation and refilling the trench etc. as required.
75
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
75
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode at 0.5 metre depth below ground level including excavation and refilling the trench etc. as required.
75
-
-
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
200
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as required.
1500
-
-
... More
Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043-1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as required:
With 3 metre long GI Pipes and 50 kg back filling compound.
14
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
2
-
-
... More
S.B.- V - FIRE ALAmetre SYSTEM
Supply, installation, testing & commissioning of Networkable Intelligent Addressable Fire Alametre Control Panel (EN/UL Approved) having provision of 10 loops but with following no of loop cards, each loop capable of connecting upto 99 detector and 99 devices, with minimum 200 character LCD display, multiple access levels, event history file in non-volatile memory (EEPROM) to store 20000 events, including Loop driver cards, network card, in-built battery backup for 72 hrs in standby mode & 30 min in alametre condition mode in metal enclosure and other required accessories.
1
-
-
... More
Supply, installation, testing & commissioning of Networkable Intelligent Addressable additional one loop card in existing Fire Alametre Control Panel (EN/UL Approved) having provision of 10 loops.
6
-
-
... More
SITC of Networkable Intelligent Analogue Addressable Fire Alametre Active Repeater Panel with 40 characters LCD display metal enclosure & required accessories.
1
-
-
... More
Supply, installation, testing & commissioning of follwing type Addressable detectors (EN/UL approved) with detector mounting base and other required accessories.
Photoelectric type Smoke detectors
500
-
-
... More
Rate of Rise Themetreal (Heat) detectors
70
-
-
... More
SITC of follwing Addressable devices (EN/UL approved) with mounting base and other required accessories.
Break Glass Type Manual Call Points in having "Break glass" message embedded on the glass.
22
-
-
... More
Isolator module (Fault / Loop)
29
-
-
... More
Monitor Module
5
-
-
... More
Control Module (for access triping off)
22
-
-
... More
SITC of Strobe cum Sounder in ABS plastic body having sound adjustible Db level upto 90 dBs and a multi tone facility and light ajustable to 110 candelas complete with mounting base, enclosure & required accessories.
22
-
-
... More
Supplying and drawing of 2x1.5sq mm ametreoured fire survial copper conductor single core cable complete as required.
12000
-
-
... More
S.H -VI- LIFTS
Suppy, installation, testing & commissitioning and putting into operation and final testing of automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) 1981and fulfilling following requimetreents on turn key basis. A. Type : Passenger lift B. Load : 8 passenger/ 544 kg C. Speed : 1.5 metre per second D. Contol : AC2 E. Operation : Microprosser based simplex collective selective with/without lift attendent F. Total rise : About 15 mtrs G. Landings : 4 All on same side H. Floors served : 2B,G,1,2,3,4 I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings J. Lift shaft size : About 1900 mm width X 1900 mm depth, finished with plaster K. Lift car size : About 1300 mm width X 1100 mm depth L. Car entrance : Minimum Clear opening 800 mm wide X 2000 mm high protected with car door M. Landing entrance: Clear opening 800 mm wide X 2000 mm high protected with landing door N. Car door : Stainless steel two pannel centre opening flush type O. Landing door : Mild steel two pannel centre opening flush type P. Door operation: Automatic electric power operated door with infra red protection Q. Car interior : Stainless steel pannel with hair line/ moon rock finish on all sides R. Car floor : Hard wood covered with PVC/ marblex tiles S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium T. Car ventilation : Pressure fan with anodised aluminium grill U. Emergency lighting in car: Battery operated Emergency lighting in the lift car V. Intercom system : Battery operated Intercom system in lift car, machine room and control room W. Emergency alametre : Battery operated alametre bell system in lift car & contol room X. Position of machine room: Directly above the lift shaft Y. Electric power supply : AC 415 Volts 3 phase 50 Hz temetreinated in machine room Z. Fire man switch : Fire man switch at main landing temetreanal
3
-
-
... More
S.B.-VII - IP CCTV SYSTEM
Providing installation testing and commissioning weather & dust proof IP based FIXED LENS true day/ night Camera (IP 66) with IR LED 20-25m range , 1.3 Mega pixel, 1/3 CCD/CMOS, ICR, 0.1 Lux/F1.2, 2.8 - 12mm / F1.4 Vari-focal Lens, Gigabit Ethernet, PoE, 24VAC/12VDC, UL certified on ceiling/ wall or other desired location with mounting accessories.
65
-
-
... More
Providing installation testing and commissioning weather & dust proof (IP66) IP based DOME PTZ (Pan Tilt & Zoom) true day& night Camera zoom 18 X optical zoom (5-15mm lens),360 degree tilt, 1.3 mega pixel, 0.1 Lux, IR Range 80m, ±0.1° preset accuracy, 0-90 tilt range, with complete accessories, UL certified on ceiling / wall or other desired location with mounting accessories.
5
-
-
... More
Providing installation testing and commissioning of following channel NVR (Network Video Recorder) with specified capacity HDD having space for fixing 4 no HDD including all connections as required.
24 channel, 4 TB HDD
3
-
-
... More
Providing installation testing and commissioning following size LCD MONITOR at desired location including all accessories, connections etc as required.
42"
3
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 infometreation outlet (I/O) for Data, Voice, Camera & Wi-Fi at user end.
70
-
-
... More
Supply , Installation , Testing and Commissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 no of hardware pkts.
7
-
-
... More
Supply , Installation , Testing and Commissioning of 4TB Surviellance Hard Disk.
3
-
-
... More
Supply , Installation , Testing and Commissioning of 24 port Fabric (SFP) switch with 20 no of 20 100M/1G SFP Port , 4 no of GbE RJ45/SFP Combo Port , 4 no of 1G/10G SFP+ Port ,1 X Console , Switching bandwidth 128 Gbps , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server.
1
-
-
... More
Supply , Installation , Testing and Commissioning of 24 port L2 Managed switch having port density 24 no of 10M/100M/1G RJ45 Port POE/POE+ ports , 4 no of 1G/10G SFP+ Port , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnotics.CE,FCC certified
3
-
-
... More
Supply, Installation, Testing and Commissioning of Industrial grade switch 4 x 10/100/1000Base‐T Ports POE + 2 x Gigabit SFP Slots + 1 Console Port , Available POE power 120W , 8K MAC address table , Ring recover time 20 ms , Support STP,RSTP , MST, 802.1Q VLAN , Support telnet , SSH , MAC-Based VLAN , IP Subnet based VLAN , Device management : topology View , FLoor View , Map View , traffic monitoring , Cable diagnotics , UL,CE,FCC Certified , IP 40 protection , DIN rail for wall mount , OPerating temperature -40°C to 75°C , Storage Temperature -40°C to 85°C , Humidity 5 to 95% RH , Dual DC Input - 48 ~ 57 VDC .
3
-
-
... More
Supply , Installation , Testing and Commissioning of fiber Modules 1G BASE
10
-
-
... More
Supply , Installation , Testing and Commissioning of ametreoured 6 core Singlemode OFC cable for interfloor switches connectivity.
500
-
-
... More
Supply , Installation , Testing and Commissioning of 6 port loaded LIU with LC adaptor plates , pigtel cables etc complete as required.
1
-
-
... More
S.B.-VIII - LIGHTING CONDUCTOR
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate having 4 no holes for fixing etc. complete as required.
2
-
-
... More
Making jointing of G.I. tape (with another G I tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as required.
2
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
750
-
-
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
125
-
-
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 no of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
4
-
-
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
50
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as required.
4
-
-
... More
S.B.-IX - PA SYSTEM
Supply, installing, testing and commissioning of 6W Ceiling /Wall Speaker with max SPL1M/1W 96dB . Frequency response of 80/160Hz-20KHz with a dispersion angle of 160 deg. The speaker should have tappings at 6W/3W/1.5W.
150
-
-
... More
Supply, installing, testing and commissioning of 8 zone IP based, digital Voice Alametre controller expandable upto 128 zones. The voice alametre controller should be able to connect directly over Ethernet. It should have functions like the audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover. The Voice alametre controller should also have the following functions: . 255 Priorities . Time schedule broadcasts . Capable of amplifier redundancy . 8 trigger inputs/outputs
1
-
-
... More
Supply, installing, testing and commissioning of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection
500 Watts
2
-
-
... More
Supply, installing, testing and commissioning of IP based Networkable touch screen paging station for selection of zones, supervision of system status, setting of scheduled broadcasts with the following functions:
. Built-in monitoring loudspeaker
. Detachable goose-neck microphone
. LCD touchscreen display
. Audio input
1
-
-
... More
Supplying and Laying of 2 core twin twisted 48/0.2 ATC, Multi strand, over all ametreoured speaker cable as specified in the Tender Specifications
1300
-
-
... More
S.B.-X - WI-FI SYSTEM & SECURITY
Supply , Installation , Testing and Commissioning of the WLAN solution should have comprehensive integrated security features that include layer 2-7 statefulpacket filtering firewall including for branch and remote offices. AP indoor 3x3 with 802.11 a/b/g/n/ac support and should have disaster recovery mechanism automatically by taking role of controller in temetres of controller failure.
20
-
-
... More
Supply, Installation, Testing & Commissioning of Wirelss controller to support Min 512 AP in future , ready to support min 60 AP from from Day1 .Min 2x USB ports , Min 16 K Wirelss client support , Min 4 GB RAM ,Min 32 GB Storage , Same make as switch.WLAN Controller should be Hardware appliance 1U Rack mountable.
1
-
-
... More
Supply , Installation , Testing and Commissioning of Internet Web Security solution with minimum of 100 users from day one with 1 years of subscription / support and flexibility to scale up to 5000 users, having 99.9% uptime with each level redundancy, single pane of glass for reporting with minimum 6 months of logs and must be Leaders in Gartner Magic Quadrant in the last 1 consecutive years (2017) and includes following features as per detailed specification: a) Web Security
b) Full SSL Inspection
c) Next Generation Firewall
d) Sandboxing
e) Bandwidth Control
f) Cloud Applications Visibility
g) Mobility
1
-
-
... More
S.B.-XI - LOCAL AREA NETWORK
Supply , Installation , Testing and Commissioning of Core Switch should have Min 24 x100/1000X SFP port , Min 8x10/100/1000T port , Min 4 X 10 G Based SFP+ port , 2x Stacking port comprising 160 Gbps of stacking bandwidth from day 1, Support less than 50 Millisecond convergence based of RFC 3619./REP/G.8032 , Min Operating temp 0-50 Degree C ,Must have Common criteriacertification EAL3/NDcPP/NDPP, should support AVB,CE.2 and CB certified.RPS Support . Min 296 Gbps switching backplane , Min 220 Mpps forwarding Rate .Should be upgardable to Min 2x QSFP+ port .Operating Temperature 0-50 Degree C , Should support SyNCE E , MPLS , Min 1GB RAM & 4GB Flash,Min 90K Mac address.Auto adustable fan based on temperture variation.
1
-
-
... More
Supply , Installation , Testing and Commissioning of Access switch should have 24 x10/100/1000T port , Min 8 x1 G SFP port , should be upgradable to Min 4x 10 G based SFP+ port , 2x Stacking port comprising 40 Gbps of stacking bandwidth from day 1 ,Support less than 50 Millisecond convergence based of RFC 3619/REP/G.8032 , Min Operating temp 0-50 Degree C ,Must have Common criteriacertification EAL3/NDcPP/NDPP, should support AVB,CE.2 and CB certified.Min 370 Watt PoE/PoE+ power budget based on IEEE 802.3af/IEEE 802.3at,RPS Support, Min 1GB RAM & 4GB Flash.Auto adustable fan based on temperture variation.
1
-
-
... More
Supply , Installation , Testing and Commissioning of fiber Modules 1G BASE
1
-
-
... More
Supply, Installation, Testing & Commissioning of Appliance based customised ITAM for asset inventory management with ability to map physical locations and exact rack elevations for audit and support control. Appliance shall be Intel x86 based device with secure internet server with Linux Based operating system and relational databases for long temetre storage. Appliance includes license for 500 units under control.
1
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity.
20
-
-
... More
Supply , Installation , Testing and Commissioning of CAT6 patch cord 7 feet for infometreation outlet (I/O) to end user device connectivity.
20
-
-
... More
Supply , Installation , Testing and Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side.
20
-
-
... More
Supply , Installation , Testing and Commissioning of 42 U (600W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 no of hardware pkts.
1
-
-
... More
S.B.-XII - IPBAX
Supply , Installation , Testing and Commissioning of IP Based voice Communication System with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30x1 Ch) Circuit with CLIP Facility, 155 IP users License ,01 no IP based Operator Console,120 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, - Redundant server in active-Active mode.
1
-
-
... More
Supply , Installation , Testing and Commissioning of Type -1 IP phone with 1 VoIP accounts, graphical LCD.
140
-
-
... More
Supply , Installation , Testing and Commissioning of Type 2 IP Phone with 2 Voip accounts, 2 Lines , HD Voice,Graphic LCD display with backlight.
5
-
-
... More
S.B.-XIII - CSS & HT CABLE
Supplying, Installation, testing and commisioning of Indoor 11KV 1-Way CSS/PSS consisting of 11KV switch with VCB circuit breaker as protection along with protection relays O/C,E/F,U/V & O/V with CT along with metreing on HT side + 800KVA Dry type 11KV/415V Transfometreer (IS:1180-LVL II) with OFF load tap changing arrangements on HV side with (+10% to -10%) in steps of 2.5%, along with 1250A 4P ACB-1no LT Switchgear with all connections,accessories as per specifications etc complete as required in all aspects.
1
-
-
... More
Supplying and laying one number following sizes XLPE, steel ametreoured, aluminium conductor power cable of 11 KV grade direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
3 x 150 sq mm
50
-
-
... More
Supplying and making INDOOR cable end jointing with heat shrinkable cable jointing kit including lugs and other jointing materials, for following size of 3 core, PILC aluminum conductor cable of 11 KV grade as required :
150 sq. mm
3
-
-
... More
Supplying and making OUTDOOR cable end jointing with heat shrinkable cable jointing kit including lugs and other jointing materials, for following size of 3 core, PILC aluminum conductor cable of 11 KV grade as required :
150 sq. mm
3
-
-
... More
SITC of 11KV, 50Hz, 21KA / 3sec 630Amp 3-Way metreU with metreing & LPT, Outdoor type as per IEC62271-200, Extensible type consisting of 2no VCB as I/C & 1 no VCB as O/G - Motorised with CT of 100/5A, 15VA , 5P10 and self power Numerical Relay (O/C+E/F) with set of VCB feeders, front cable connection bottom entry suitable upto 3cx150sq mm cable, metreing cubicle having PT of 11KV/ Rt 3/11V / Rt3, MFM, R-Y-B phase indication lamps. Incomer VCB shall be with line PT with U/V & O/V protections and HT CT complete in all aspects as required.
1
-
-
... More
S.B.-XIV - LT PANELS & MISC. ITEMS
Design, fabrication, assembling, wiring, supplying and erection at site with chanel frame, grouting etc complete in al aspects of following distribution panels fabricated out of 14 gauge CRCA sheet steel in cubicle fometreation with reinforcement of suitable size angle iron,channels,T irons,flats wherever necessary for large distribution panels. The boards shall be powder coated treated with all anticorrosive process before painting as per standards with 2 coats of red oxide primer and final approved shade of enameled paint , 2 no earthing temetreinals shall be provided for 3 phase distribution panels. The panels shall be suitable for 415 V ,3 phase ,4 wire , 50 Hz supply system . Lifting hooks shall be fabricated in easily transportable sections & length, height, depth etc to match with site conditons . An approval shall be taken for each panel before final manufacturing.
Galvanized hardwares with zinc passivation shall be used in fabrication of boards. Suitable earth bus to be provided throughout length of LT Panels and all panels. Ics = 100% Icu
All ACB's will be EDO microprocessor based
MCCB's above 250Amp will be with Microprocessor based
Incomers shall be Electrically & Mechanically Interlocked with bus coupler & each other. No two supplies should get mixed up
Bus bar and interconnections should be of high conductivity electrolytic grade Aluminum.
Busbars shall be TPN with Neutral Bus being half the size of phase busbar
Busbar shall be PVC sleeved as per IS 375
Measuring Instruments-Multifunction Digital Type with LED Display & Selector Switch. Instruments shall have Class 1 Accuracy as per IS - 1248.
Fault withstand capacity of the panels should be 35 KA, Icu=Ics=Icw for 1 second
TYPE 1+2 SPD WILL BE PROVIDED AT I/C IN MAIN LT PANEL & TYPE 2 FOR ALL FLOOR SDB's with indicator of how much life remaining for SPD end of life indication.
Incomers shall be Electrically & Mechanically Interlocked with each other as well as with coupler
PLC based Auto Load Management for 3 no DGS Sets in LT cum EMG Panel to be incorporated complete as required
24V DC Battery Charger
1 kVA UPS
Emergency Push Button
Relay Board 2 C/O 24V DC
SMPS 24V DC
A/M Selector Switch 3 Way
Auxilary Contactor with NO & NC 12 Window Annunicator 24V DC
DC AMmetre & VOLTmetre
HOOTER 24V DC
PUSH BUTTONS
MAIN LT PANEL cum EMG PANEL
INCOMER - SOLAR
1 no 125, 4P MCCB (25KA) with protections E/F,O/L,S/C release.
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 125/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
under voltage protection
over voltage protection 1 Set of control fuses & control temetreinals.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
INCOMER - TRANSFOmetreER
1 no 1250A, 4P EDO ACB (50KA) with protections E/F,O/L,S/C release, U/V, shunt release, SPD, with NO & NC Auxiliary contacts.
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 1250/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
under voltage protection
over voltage protection IDMT protection
Reverse Power protection
Master Trip protection
1 Set of control fuses & control temetreinals.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
INCOMER - DG SET 500 KVA
1 no 800A, 4P EDO ACB (50KA) with protections E/F,O/L,S/C release, U/V, shunt release, SPD, with NO & NC Auxiliary contacts.
each Incomer metreing & Protection.
1 Set of MFM (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 800/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
under & Over voltage protection
over & under frequency protection Reverse Power protection
Master Trip protection
1 Set of control fuses & control temetreinals.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Couplar between Section 1& 2
630A, 4P ACB bus couplar with protections.
1 no U/V release
1 Set of control fuses & control temetreinals
1 Set of ON/OFF/TRIP indication lamp. INCOMER - DG SET 250 KVA
1 no 630A, 4P EDO ACB (50KA) with protections E/F,O/L,S/C release, U/V, shunt release, SPD, with NO & NC Auxiliary contacts.
each Incomer metreing & Protection.
1 Set of MFM (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 630/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
under voltage protection
over voltage protection Master Trip Relay
Over & Under Frequency protection
1 Set of control fuses & control temetreinals.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 1500 & 800 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Two (2) no 630Amp 4P ACB (50 KA)
One (1) no 630Amp TP+N MCCB (35 KA)
Two (2) no 200Amp 4P MCCB (25 KA)
Three (3) no 125Amp 4P MCCB (16 KA)
Sixteen (16) no 100Amp 4P MCCB (16 KA)
Three (3) no 63Amp 4P MCB (10 KA)
1
-
-
... More
LOWER BASEMENT PANEL
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Three (3) no 63Amp 4P MCB (10 KA)
Two (2) no 25Amp 4P MCB (10 KA)
Three (3) no 40Amp DP MCB (10 KA)
1
-
-
... More
UPPER BASEMENT PANEL
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Five (5) no 63Amp 4P MCB (10 KA)
Three (3) no 25Amp 4P MCB (10 KA)
1
-
-
... More
G/F PANEL-1
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar
150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Four (4) no 63Amp 4P MCB (10 KA)
Two (2) no 40Amp 4P MCB (10 KA)
1
-
-
... More
G/F PANEL-2
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Four (4) no 63Amp 4P MCB (10 KA)
Three (3) no 40Amp 4P MCB (10 KA)
1
-
-
... More
TYPICAL F/F. S/F, T/F & 4/F PANEL-1
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Two (2) no 80Amp 4P MCB (10 KA)
Two (2) no 40Amp 4P MCB (10 KA)
4
-
-
... More
TYPICAL F/F,S/F & T/F PANEL-2
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Two (2) no 80Amp 4P MCB (10 KA)
Two (2) no 63Amp 4P MCB (10 KA)Two (2) no 40Amp 4P MCB (10 KA)
3
-
-
... More
4/F PANEL-2
INCOMER 1 no 100A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 100/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Two (2) no 80Amp 4P MCB (10 KA)
One (1) no 63Amp 4P MCB (10 KA)
Two (2) no 40Amp 4P MCB (10 KA)
Four (4) no 40Amp DP MCB (10 KA)
1
-
-
... More
TERRACE PANEL
INCOMER 1 no 125A, 4P MCCB (16KA).
each Incomer metreing & Protection.
1 Set of Multifunction metre (96x96mm) for V/A/PF/Hz/KVAH/KWH with LCD/LED Display as per IS 14697
3 no 125/5A ratio CTs 15 VA class 5P 10
3 no phase indicating lights with control fuses.
3 no breaker ON/OFF/TRIP indication lamp with 2A SP MCB.
Bus Bar 150 Amp TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sqmm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.
Outgoings
Two (2) no 63Amp 4P MCB (10 KA)
Six (6) no 40Amp 4P MCB (10 KA)
1
-
-
... More
Supplying, erection and commissioning of the following intergrated cubical type indoor automatic switching "ON" and "OFF" control panel with dust vemetrein proof lined locable doors complete with interconnection stepped relays contractors Push button and CTS complete with a capacitor bank as per specification (suitable for 400/440V 3 phase 50 C/S supply system) as required (capacitor Panel)
INCOMING
630A TP+N MCCB (35kA) -1 no
PHASE INDICATION lamps each backed up with 5A unit to indicate that the unit is "ON" - 13 Set
Indication lamp to each 50KVAR capacitor unit to indicate that the unit (MPP type) is"ON" - 02 no Indication lamp to each 25KVAR capacitor unit to indicate that the unit (MPP type) is"ON" - 06 no Indication lamp to each 15KVAR capacitor unit to indicate that the unit (MPP type) is"ON" - 02 no Indication lamp to each 10 KVAR capacitor unit to indicate that the unit (MPP type) is"ON" - 01 no
Indication lamp to each 05 KVAR capacitor unit to indicate that the unit (MPP type) is"ON" - 02 no
0-500V voltmetre with 3 way and off selector switch
630/5A CTS Ratio -1 Set.
APFC Relay -1Set.
Power factor metre -1 Set.
Outgoings
100A MCCB with contractor to each 50 KVAR capacitor -02 no
63A MCCB with contractor to each 25 KVAR capacitor -06 no
40A MCCB with contractor to each 15 KVAR capacitor -02 no
32A MCB with contractor to each 10 KVAR capacitor - 01 no
25A MCB with contractor to each 05 KVAR capacitor - 02 no
Push button stations "RED" and "GREEN" push button for manual operation of contractor - 13 Set
Autonation sweitching "ON" and "OFF" control panels as described above
50 KVAR capacitor bank -02 no
25 KVAR capacitor bank -06 no
15 KVAR capacitor bank -02 no
10 KVAR capacitor bank -01 no
05 KVAR capacitor bank -02 no
All interconnections from bus bar to connectors and connectors to temetreinal
1
-
-
... More
Providing and erecting floor mounted sand/ water bucket stand for keeping 4 no of fire bucket, 1500 mm in length and 900 mm in height made out of 30 X 30 X 4 mm angle iron welded with 4 hooks and duly painted with one coat of zinc cromate primer and 2 coat of synthetic enamel paint of post box red colour etc complete.
2
-
-
... More
Supplying G.I. Fire buckets with round bottom having at least 9 lit. capacity duly painted with one coat of zinc cromate primer and 2 coat of synthetic enamel paint of post box red colour and filled with dry sand and kept on provided wall hook or stand etc complete.
2
-
-
... More
Supply and laying SMC chequere plate in size 1m x 1m x 2.5mm (thick) to withstand 22 KV Electrical stress near LT or 11 KV HT panel etc complete.
10
-
-
... More
Supply and erecting following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete.
CO2 type 4.5 kg
4
-
-
... More
Supplying, installation, testing and commissioning of centrifugal type mono-block self priming electric pump set suitable for single phase, 230 volts AC supply including connection of suction and delivery line etc. as required.
2.0 HP single phase
1
-
-
... More
SITC of Automatic Organic Waste Composting machine with stainless steel tank and shafts made of SS 304, PLC based control with VFD drive fully automatic complete in all aspects as required.
1
-
-
... More
S.B.-XV - EXTERNAL LIGHTS
Supplying, installation, testing and commissioning of following 230/250 volts LED Post Top Lantern fitting with perplex cover, electronic driver, heat sink, capacitor and all other accessories on existing gate column/ pole bracket complete as required and furnishing 3 Yrs Guarantee certificate from manufacturer.
20 watt
20
-
-
... More
Supplying, installation, testing and commissioning of following 230/250 volts LED BOLLARD fitting with electronic driver, heat sink, capacitor and all other accessories on existing foundation/ pole bracket complete as required and furnishing 3Yrs Guarantee certificate from manufacturer.
9 watt
15
-
-
... More
Supply of hot dipped galvanized (in single dip to average 65 micron) octoganal pole made of 3mm thick steel sheet having window and flush cover with locking arrangement at suitable height from base for cable temetreination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications including 3mm thick anchor plate, 4 no 16mm dia foundation bolts of EN8 grade. (designed for wind speed upto 150km/hr)
3 metre high, dia 130mm at bottom and 70mm at top, base plate size 200x200x12mm, foundation bolts 450mm long
20
-
-
... More
Supplying, installation, testing and commissioning of following 230/250 volts metal halide wide beam flood light luminaries with weather proof gear box, igniter, capacitor with IP 66 protection on wall surface/ building parapet/ pole bracket complete but without lamp as required
1x150 watt
10
-
-
... More
SITC of 6W aluminium die cast inground burial IP65 four way light in 3000 Kelvin.
45
-
-
... More
SITC of Highmast pole light for area lighting with 2x250 w flood lights of wide beam angle. Lights should be IP65 rated.
6
-
-
... More
SITC of LED Flexible Neon light with IP65 and 9w/metrer running on 24V DC. Complete with all accessories and driver.
400
-
-
... More
SITC of IP67 LED linear encapsulated channel light with 12w/metrer running on 12V DC in 3000 Kelvin. Complete with all accessories and driver.
100
-
-
... More
SITC of IP65 square driveover inground burial light of 27w in 3000 Kelvin.
1
-
-
... More
SITC of 20 W LED Spike plant uplighter with IP65 and 3000 Kelvin light.
50
-
-
... More
SITC of tree uplighter modules as per size of tree stem. each IP 65 module of 20-24 w in 3000 Kelvin. Similar
1
-
-
... More
SITC of 20-24 w LED Under water IP68 light in 3000 Kelvin.
29
-
-
... More
SITC of aluminium body 2x30w LED updown wall light of IP65 in 3000 Kelvin.
30
-
-
... More
SITC of 30 w tiltable inground burial light with external mechanism to tilt the light beam. IP65 with 3000 Kelvin.
15
-
-
... More
S.H -XVI- L.T .CABLES Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, steel ametreoured, aluminium conductor power cable of 1.1 KV grade direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
2 x 6 sq. mm
500
-
-
... More
4 x 10 sq. mm.
2000
-
-
... More
4 x 16 sq. mm.
100
-
-
... More
3.5 x 400 sq. mm.
150
-
-
... More
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, unametreoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as required.
2 x 4 sq. mm
150
-
-
... More
2 x 6 sq. mm
150
-
-
... More
3.5 x 35 sq. mm.
50
-
-
... More
4 x 10 sq. mm.
200
-
-
... More
4 x 16 sq. mm.
250
-
-
... More
4 x 25 sq. mm.
200
-
-
... More
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, unametreoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm MS flat clamp and steel dash fastener/ G.I. bolts and nuts as required.
3.5 x 50 sq. mm.
200
-
-
... More
3.5 x 70 sq. mm.
500
-
-
... More
3.5 x 95 sq. mm.
200
-
-
... More
3.5 x 120 sq. mm.
150
-
-
... More
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, unametreoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 40x3 mm MS flat clamp and steel dash fastener/ G.I. bolts and nuts as required.
3.5 x 150 sq. mm.
150
-
-
... More
3.5 x 240 sq. mm.
300
-
-
... More
Supplying and laying following sizes one number PVC insulated, PVC sheathed, unametreoured, copper conductor controle cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as required.
2 x 1.5 sq. mm
100
-
-
... More
4 x 1.5 sq. mm
100
-
-
... More
Supplying and laying following sizes additional one number, PVC insulated/ XLPE, PVC sheathed, steel ametreoured, aluminium conductor power cable of 1.1 KV grade direct in ground as in the same trench in one tier horizontal fometreation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
3.5 x 400 sq. mm.
200
-
-
... More
Supplying and making end temetreination with brass compression gland and aluminum lugs for following size ametreoured aluminum conductor power cable of 1.1 KV grade as required.
2 X 4 sq. mm (16 mm)
2
-
-
... More
2 X 6 sq. mm (16 mm)
2
-
-
... More
4 X 10 sq. mm (22 mm)
20
-
-
... More
4 X 16 sq. mm (22 mm)
2
-
-
... More
4 X 25 sq. mm (25 mm)
2
-
-
... More
3½ X 35 sq. mm (28 mm)
2
-
-
... More
3½ X 50 sq. mm (32 mm)
18
-
-
... More
3½ X 70 sq. mm (35 mm)
14
-
-
... More
3½ X 150 sq. mm (45 mm)
2
-
-
... More
3½ X 240 sq. mm (57 mm)
10
-
-
... More
3½ X 400 sq. mm (70 mm)
10
-
-
... More
Supplying and installing following size powder coated, perforated M.S. cable trays with perforation not more than 17.5% rigidly suspended from the ceiling with M.S. suspenders at a distance not more than 2.5 metre and near every junction/ joint etc complete as required.
150 mm width X 50 mm depth X 1.6 mm thickness
75
-
-
... More
300 mm width X 50 mm depth X 1.6 mm thickness
150
-
-
... More
750 mm width X 62.5 mm depth X 2.0 mm thickness
75
-
-
... More
900 mm width X 62.5 mm depth X 2.0 mm thickness
75
-
-
... More
Supplying and laying following size RCC Hume pipe class NP-2 (in standard length of 2 metre) with collar in ground below road, path etc at a depth not less than 50 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as required.
100 mm dia
50
-
-
... More
200 mm dia
25
-
-
... More
S.H -XVII- DG SET
Supplying, installation, testing and commissioning of following capacity diesel Generating Set (alternator directly coupled to diesel engine) compete in all respect broadly comprising of following and as per specification. A. Alternator : Self excited, brush less type, of following capacity, 3 phase, 415 volts 50 Hz, 4 pole, AC alternator complete with all accessories. B. Engine : water cooled diesel engine of suitable BHP for rated alternator at 1500 rpm, turbo charged, direct injection type, 4 stroke, 4/6 cylinder including specified size fuel tank of approved design and shape duly calibrated and painted with one coat of primer and two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust MS pipe (upto 2 metre beyond silenser) duly wrapped with asbestos rope of legging of specified quality and specification. C. AMF Panel : Cubical, compartmentalized, AMF panel board with all suitable size power and control contactors, switches, metres and other accessories, internal wiring, connection, inter-connection etc. for trouble free smooth functioning of DG Set complete with battery charger and leads as required. D. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting etc. as required.
250 KVA
1
-
-
... More
500 KVA
1
-
-
... More
S.H -XVIII- NET metreING SOLAR POWER
SITC of following KW Net metreing grid interactive roof top solar photo voltaic power generation system including space frame batteries, PDU, Smart Solar Grid Connected Inverter etc. as described below and any other items required to be considered
Sets of Solar PV Modules Type - Poly-Crystalline Rating - 250 Wp or above @ STC
1 Set Module Mounting Structure
Details - Suitable to Mount 50 KWp PV array
Grid Tie Inverter Rating –50KW
1 Set. AC and DC Cables (of appropriate rating )
1 Set. Earthing Type- Chemical earthing
1 no Lighting Arrester
AC Distribution Board (with MCB/MCCB, Indicators, Buzzer etc) (Lump Sum)
Miscellanious items like Cable lugs, Ties, cable trays (if required), Earthing strips, MC4 connector pairs, thimbles, conduits etc. (Lump Sum)
1
-
-
... More
S.H - DUMB WAITER
Suppy, installation, testing & commissitioning and putting into operation and final testing of Dumb Waiter and all standard equipments, accessories and control equipments as per manufacturer's design and fulfilling following requimetreents on turn key basis. A. Type : Dumb Waiter B. Load : 100 kg C. Speed : 0.3 metre per second D. Contol : ACVVVF
E. Total rise : About 12 mtrs F. Landings : 5 on both side G. Floors served : G,1,2,3,4 H. Signals : Digital car position indicator, car travel direction indicator in car & at all landings I. Shaft size : About 1200 mm width X 900 mm depth J. Car size : About 700 mm width X 700 mm depth K. Landing Doors : Stainless Steel (304) Hairline Manual Swing Door L. Car Enclosure : 304 Hairline SS M. Car Frame : M.S Fabricated Chanel N. Brake : Electro Mechanical A.C Brake non sparking type.
O. Gear Box : Gear Box with suitable reduction ratio.
P. Motor : 3-phase Induction Motor
Q. Ropes : Elevators Tested Ropes 2no 10mm
R. Coupling : Fixed Type Coupling S. Position of machine : Directly above the lift shaft T. Electric power supply : AC 415 Volts 3 phase 50 Hz 2 KW
1
-
-
... More
S.B - BOOM BARRIER
Supply, Installation, Testing & Commissioning of Boom Barriers Up & Down 6 Length of Boom : upto 6 M Duty Cycle: Intensive Opening- Closing Time : 2.5-4 seconds(Adjustable) With –in Built crash protection feature manual over-ride, Integration with Smart card and proximity reader, Along with push button for opening and closing of Barrier With Safety rubber at bottom. Photocell included for auto closing.
3
-
-
... More
Supply, Installation, Testing & Commissioning of Hydraulic Model J-800 Automatic Bollards with Pit. Dia-275 mm, Height-800 mm along with control panel & push button. AISI-SS 316 Grade.
3
-
-
... More
Supply, Installation, Testing & Commissioning of Magnetic Pedestrian Retractable Gate Barrier with glass top,High Safety 1 STD Lane Lane 520mm aisle width of soft flap in Stainless Steel Cabinet with Magnetic High Torque Motor,Nometreally closed mode operation with Lane Indicator for passenger signalling.Offering a through put of upto 40 persons per minute.
2
-
-
... More
Supply, installation, testing and commissioning of automatic hydraulic tyre killer for suitable road width 6 mtrs for intensive applications, high speed with 2-3 second opening time,Blocking height- 120mm (for Gate Entry/Exit) Along with Puch Buttons.
3
-
-
... More
S.B - BAGGAGE SCANER
Supply, installing, testing and commissioning Portable X-Ray Baggage Inspection System. Increases throughput at security checkpoints Easy to operate· Powerful 140kV generator for steel penetration up to 31 mm· Optional TIM upgrade for liquids detection · Integrates with iLane checkpoint designs .Tunnel Dimensions –600 mm (W) x 400 mm (H) (min) or more and have an Operational Weight of not more than 450kg
2
-
-
... More
Supply, installing, testing and commissioning HAND HELD METAL DETECTOR Pulse induction technology, transmitter / receiver with automatic instant retune and should be compliant to NIJ-0602.02.
5
-
-
... More
Supply, installing, testing and commissioning DFMD ,The Metal Detector shall detect the metal test pieces independently of their speed of transit through the archway (range: 0.3 … 15m/s). This requires constant sensitivity for variations in speed. The equipment shall have the IP65 rating for outdoor applications.
2
-
-
... More
HVAC WORK SUB HEAD 1.0 - HIGH SIDE EQUIPMENTS.
ROTARY SCREW WATER COOLED CHILLING MACHINE WITH MICRO-PROCESSOR BASED CONTROL PANEL WITH VFD / SINGLE/ DOUBLE COMPRESSOR WITH CONDENSER TUBE AUTO CLEANING
Supply, installation, testing & commissioning of screw type water cooled water chilling machines each having minimum actual capacity of 130 TR at chilled water inlet/ outlet temperature of 56 deg.F / 44 degF having evaporator fouling factor of 0.00025 FPS unit with chilled water circulation rate of 312 USGPM and condenser water inlet temperature of 90 deg. F and having condenser fouling factor of 0.0005 FPS unit with circulation rate of 494 USGPM suitable for operation on refrigerant R-134a each comprising the following complete as per specifications and as required. IKW/TR at full load shall be 0.71 max and NPLV shall be 0.46 max. OEM provided Certified software selection sheet in accordance with ARI 550/590 at above mentioned parametres shall be submitted with the bid. The Water Side Pressure Drop in Chiller & Condenser should not exceed 2mtrs and 4 mtrs respectively
a) 1 or more Twin / Mono screw type compressor in semi hemetreetic construction only, complete with automatic stepless type capacity control from 25 to100%, safety switches, forced feed lubrication system etc, as per specifications.
b) Suitable no & suitable capacity squirrel cage induction motor with class 'F' insulation suitable for operation on 415 volts +10% , 50 Hz, A.C. supply.
c) Suitable no & suitable capacity Air Cooled VFD starter suitable for compressor motor complete with ammetre, over load protection, under voltage protection, protection against phase reversal & independent single phase preventors etc complete as required. The VFD shall be installed inside the IP 42 rated panel or in case VFD is installed seperately the same shall be IP 54 rated.VFD starter shall be with By Pass Star- Delta Starter.
d) Necessary drive arrangement
e) Suitable no of Sets - Lubrication device consisting of automatic electric oil pump, oil cooler, head tank, oil strainer, automatic pressure regulating valve, oil heater, oil heater themetreal switch etc. as per specifications.
f) 1 no - Matching (ASME/GB/BIS) shell and tube water cooled condenser of M.S. shell and both side integrally finned copper tubes having max. two passes and presssure drop 4 mtr max. Marine Water box shall be provided for ease of maintenance. DP switch for flow detection.
g) 1 no - Matching (ASME/GB/BIS) shell & tube flooded type chiller for screw type units of MS shell and both side integrally finned copper tubes having max. two passes and pressure drop 2 mtrs max. The chiller shall be duly insulated with 19 mm thick elastomeric nitrile insulation at factory. DP Switch for flow detection.
h) 1 Lot - Refrigerant piping fittings, valves, level sensing electronic expansion valves and accessories to inter connect compressor, condenser, chiller and electronic expansion valve.
SUB HEAD 1.0 - HIGH SIDE EQUIPMENTS.
1 Set - Microprocessor based control panel comprising of Controls including sensors, factory manufactured and tested. All Control function including start up and shut down leaving chilled water temperature Control, Compressor and Electronic Expansion Valve modulation, anti re-cycle logic, automatic Compressor and load limiting. it shall also be equipped with the following protection and monitoring devices.
i) High (Condenser) & Low (Evaporator) pressure protection.
ii) Low oil level & pressure protection.
iii) Chilled/Condenser Water flow loss.
iv) Chiller Water Freeze protection.
v) Sensor error protection.
vi) Motor load control and overload.
vii) High motor temperature protection.
viii) High oil temperature protection.
ix) Chiller inlet and outlet Water temperature.
x) Condenser inlet / Outlet water temperature
xi) Suction and discharge Compressor pressure.
xii) Microprocessor based control panel shall have suitable hardware & software so that it can be integrated directly to with standard communication open protocol using backnet / Modbus as well as open IP. The display shall be minimum 10 inch coloured graphical display. Lot - Refrigerant line accessories comprising of safety valves, angle valve, liquid line indication, liquid level control etc.
Lot - DP switches at inlet and outlet of condenser & chiller, water drain & air purge valves, cable temetreination box, wherever required.
Lot- suction line and chiller insulation with minimum 19 mm thick polyvinyl nitrile rubber insulation
Lot-frame work for mounting the above condenser, chiller, compressor and motor with base plate complete with antivibration pads/ springs.
Lot- Initial/ first charge of refrigerant gas & compressor oil duly charged at factory.
Lot- RCC/ cement concrete foundation for equipment
130 TR Actual Capacity ( 2 no Working + 1 no Standby)
-
-
-
... More
Condenser CDW IN - 32.22º C./ 90.00 º F CDW OUT - 36.39º C /.97.50 º F
Fouling factor of Condenser (FPS /MKS) - 0.001 / 0.0002
Condenser Floe Rate - 3.8 GPM
Chiller CHW IN - 13.33 º C / 56.00 º F CHW OUT - 6.66 º C / 44.00 º F
Fouling factor of chiller ( FPS /MKS)- 0.0005/0.0001
Condenser Floe Rate - 2.4 GPM
SUB HEAD 1.0 - HIGH SIDE EQUIPMENTS.
Automatic Tube Cleaning System.
-
-
-
... More
03 No Water cooled VFD type chiller for AUTO TUBE CLEANING Process consists of an injection pump, collection pump, ball trap, ball collector, control valves, HMI and sponge balls depending upon the number of tubes in condenser and tube size
Supply, installation, testing & commissioning of Verticle Inline Split Coupled condenser water centrifugal pump sets with bronze impeller for condenser water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, mechanical seal etc.confometreing to technical specification & as per following parametres: (Company Assembled & Factory Fitted)
Condenser Water Pumps Capacity of each Pump LPM 1867
Pump Head (Mt) 22.5
Proposed KW of Motor 15.0
-
-
-
... More
Primary Chilled Water Pumps Supply, installation, testing and commissioning of Split Coupled Verticle Inline chilled water centrifugal pumpsets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, mechanical seal etc. confometreing to techinical specification and as per following parametres. The chilled water pumps shall include themetreal insulation & cladding. (Company Assembled & Factory Fitted)
Capacity of each pump (LPM) 1179
Pump Head (Mt) 12.0
Proposed KW of Motor 3.7
-
-
-
... More
Secondary Chilled Water Pumps Supply, installation, testing and commissioning of Split Coupled Verticle Inline Chilled water centrifugal pump sets with bronze impeller for chilled water recirculation complete with TEFC Sq. Cage induction motor with class "F" insulation, coupling guard, factory fitted mechanical seal etc. confometreing to technical specification & as per following parametres.The chilled water pumps shall also include the cost of themetreal insulation and aluminium cladding.Secondary chilled water pumps shall be suitable for operation on adjustable frequency drives & confometreing to the specifications of variable speed pumping system (Company Assembled & Factory Fitted)
SUB HEAD 1.0 - HIGH SIDE EQUIPMENTS.
Variable Speed Pumping System
Supply, installation, testing and commissioning of Variable Speed Pumping system consisting of Three Numbers 15.0 KW adjustable frequency drive (AFD) ( Stand alone or integrated with motor for sensorless operations) suitably interfaced with other system components, hand / auto macro designed for pumping application, no of dedicated microprocessor based pump logic controller, parallel pumping software duly downloaded, no of Differential Pressure Sensor / Transmitters, interfacing amongst all components and compatibility of I/O signals etc complete with other accessories as required. 01 SET
Capacity of each pump (LPM) 1179
Pump Head (Mt) 38.0
Proposed KW of Motor 15.0
Min Eff : 80%
-
-
-
... More
Supply Install and Commissioning of CTI Certified Close type Cooling Tower for of 150 TR. The cooling tower shall be constructed with a sturdy GSS structural frame designed to transmit all wind, seismic and mechanical loads to the equipment anchorage. The frame shall be constructed of heavy-gauge steel angles and channels.Casing panels shall be constructed of galvanized steel protected. The cold water basin shall be constructed of heavy-gauge steel panels and structural members. Basin shall include a depressed center section with drain/clean-out connection. The water outlet connection shall be beveled for welding and grooved for mechanical coupling or bolt hole circle designed to accept an ASME Class 150 flat face flange. The outlet shall be provided with large-area lift out strainers with perforated openings sized smaller than the water distribution nozzles. The hot water distribution basins shall be the open and gravity fed for easy cleaning, and constructed of heavy-gauge, G-235 (Z700) hot-dip galvanized steel. The basins must be accessible from outside the unit and serviceable during tower operation. Basin weirs and plastic metreing orifices shall be provided to assure even distribution of the water over the fill. Lift-off distribution covers shall be constructed of heavy-gauge G-235 (Z700) hot-dip galvanized steel and designed to withstand a 50 psf (244 kg/m2) live load or 200 pound (90.7 kg) concentrated load. Gravity flow nozzles shall be snap-in type for easy removal. Should pressurized nozzles be used, they shall utilize grommets, which ensure easy removal. Fan(s) shall be heavy-duty, axial flow with aluminum alloy blades selected to provide optimum cooling tower themetreal perfometreance with minimal sound levels. Fan(s) and shaft(s) shall be supported by heavy-duty, self-aligning, grease-packed ball bearings with moisture proof seals and integral slinger collars, designed for a minimum L10 life of 80,000 hours.The fan(s) shall be driven by a one-piece, multi-groove, solid back V- type powerband with taper lock sheaves designed for 150% of the motor nameplate horsepower. The . The steel cooling tower shall a separate pump and for evaporative cooled water which shall be sprayed ove the SS tube bundle carrying the closed circuit water. The CCCT shall be used for regenartion of the energy piles during winter months and as support for heat rejection during summer. Supply & Return Temp 97.5/90°F, WBT 79°F.
Inlet Water Temperature 36.40 °C
Outlet Water Temperature 32.20 °C
-
-
-
... More
Supply installation , testing and commissioning of (PN 10) Closed loop expansion tank as per standards & requirements.The tank shall be made of mild steel and has a synthetic rubber membrane. Nitrogen gas or compressed air is filled in space between the membrane and the wall of the tank. The tank should be supplied complete with buster pumps (1W+1S), isolating valve, check valve, drain valve & pressure gauge. Before connecting the tank to water system, the gas pressure should be checked through the charging valve and adjusted according to the requirements, the control panel should also be included. The quoted price shall be inclusive of structural support for the tank. Capacity of tank is 500 lts+ Pumps with N+1 confirgration
-
-
-
... More
Supply, installation, testing and commissioning of PN 10 rated Air Separator made out of MS Sheet as per Specification and Schematic diagram - 500 Ltrs.for Chilled water system - 650 mm Dia
-
-
-
... More
Supply, installation, testing and commissioning of Hot Water Generator of capacity 100 KW in four banks complete with one slave bank controlled by Semi Conductor Rectifier & other necessary controls, electrical panels etc. confimetreing to technical specifications. Inlet Water Temperature 50 °C
Outlet Water Temperature 55 °C
-
-
-
... More
Double Skinned Floor Mounted Air Handling Units
Supply,Installation,Testing and Commissioning of factory built floor mounted chilled water double skin type horizontal/vertical air handling units made of 25 mm thick panels consisting of pre plasticized G.I casting of thickness 0.8 mm outside layer and 0.8 mm inside layer with polyurethane foam(PUF) insulation factory injected between them by injection moulding machine,complete with blower section with blower suitable for static pressure as required,minimum 2 bend GSS/PVC eliminators,cooling coil section with aluminium finned ,copper tubes(tubes thickness not less than 0.5 mm) cooling coil of 6 row deep,filter section with 50 mm thick metal viscous/washable synthetic type air prefilters,belt drive package with TEFC drive motor of effeciency class IE3 suitable for 415 ± 10% volts,50 HZ,3 Phase AC supply suitably designed for variable frequency drive application,drain connection,stainless steel (18G) drain pan with PUF insulation,150 mm dia.dial type pressure gauges(2 no) and industrial type themetreometres(2 no) at the inlet and outlet of coil,auto purge valve wherever required,necessary vibration isolation arrangement etc. complete as per specification and of following capacities
The face velocity across cooling coil shall be limited to 500 FPM maxm.The capacity of Air-handlers shall be as follows:
(For AHU no Please Refer Basic Of Design & AC Tender Drawing )
AHU Static Cooling Motor Coil Area Filter TR
Cap. Pr. Coil Row KW SMT CFM mm of wc Deep a) 9000 75mm 6 Row 7.5 1.67 Pre 14.00 (15300 CMH)
-
-
-
... More
75mm 6 Row 10.0 2.97 Pre 25.01 (28900 CMH)
-
-
-
... More
Double Skinned ceiling Suspended Air Handling Units
Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.8mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.8 mm plain alvanised steel sheet inside with blower, blower section and Blower shall be DIDW Forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil made of Aluminium finned Copper tube ( thickness 0.50 mm) with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 40 mm thick & 38 kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confometre to standard specification.
The face velocity across cooling coil shall be limited to 152 MPM maxm.The capacity of Air-handlers shall be as follows:
(For AHU no Please Refer Basic Of Design & AC Tender Drawing )
AHU Static Cooling Motor Coil Area Filter TR
Cap. Pr. Coil Row KW SMT CFM mm of wc Deep 3000 30mm 6 Row 2.2 0.56 Pre 4.60
-
-
-
... More
4000 40mm 6 Row 2.2 0.74 Pre 6.90
-
-
-
... More
Double Skinned ceiling Suspended Air Handling Units
Supply, installation, testing and commissioning of factory fabricated double dacker Double Skinned Chilled Water Air- handling unit horizontal type fabricated out of extruded aluminium section consisting with 0.8mm pre-plasticized/pre-coated Galvanised steel sheet outside & 0.8 mm plain alvanised steel sheet inside with blower, blower section and Blower shall be DIDW Forward / Backward Curved blade from and blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row cooling coil made of Aluminium finned Copper tube ( thickness 0.50 mm) with coil section, pre - filter section with non woven synthetic media of 10 micron particle size with an efficiency of 90%, polished stainless steel drain pan made out of 18 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 40 mm thick & 38 kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only. The complete AHU shall confometre to standard specification.
NOTE: The supply & exhaust part of this AHU shall have items / sections as mentioned above in the the following order.
Supply Part : Fresh air intake louvre, pre & fine filter
section, HRW frame & HRW , cooling / heating coil, supply fan, Exhaust Part : Return air intake, pre & fine filters, HRW, exhaust air fan & exhaust.
TFA UNIT 7000 CFM (66.6. TR) Supply Blower, 6 Row CC 75 mm Static Pressure for Supply Fan , 7000 CFM Return Air Blower , 75mm Static Pressure for Return Air fan )
-
-
-
... More
Supply, installation, testing and commissioning of two way motorised valves duly insulated ( 50 mm thick EPS , 20 kg / metre³ with modulating moter in cooling coil & heating Coil of air handling units with actuator & electronic modulating themetreostat with digital display alongwith transfometreer of following size. 25 mm dia
-
-
-
... More
32 mm dia
-
-
-
... More
40 mm dia
-
-
-
... More
50 mm dia
-
-
-
... More
80 mm dia
-
-
-
... More
Supply, installation, testing and commissioning of GI powder coated fan coil units complete with fan, 3 speed motor, 4 row deep cooling coil, aluminium filters with filter box, double sandwitched insulated tray, ball valve with strainer, balancing valve, copper connection & Flexiable ( Completer FCU Link) , rotary switch, supporting arrangement, electrical wiring etc. The fan shall be selected for 12 mm static pressure & automatic control for Fan Coil Units consisting of three way motorised valves with snape acting motor & themetreostat. The complete fan coil unit shall be in line with the standard specification. The capacity of fan coil units shall be as follows:
1.0 TR (400 CFM )
26
-
-
... More
1.5 TR (600 CFM )
78
-
-
... More
2.0 TR (800 CFM )
24
-
-
... More
2.5 TR (1000 CFM )
-
-
-
... More
3.0 TR (1200 CFM )
-
-
-
... More
Supply, installation, testing and commissioning of automatic control for Fan Coil Units consisting of two way motorised valves with snape acting motor & themetreostat.
Up to 4.0 TR ( 25/ 32 mm dia.)
132
-
-
... More
INSULATED CHILLED WATER PIPING ( Expanded Polystrene Insulation)
Supplying, laying/ fixing of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.63mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) at joints repairing of damage to building etc. as per specifications and as required complete in all respect.
Note : The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
250mm dia.(75mm thick insulation)
10
-
-
... More
200mm dia.(75mm thick insulation)
180
-
-
... More
150mm dia. (75mm thick insulation)
30
-
-
... More
125mm dia.(50mm thick insulation)
200
-
-
... More
100mm dia. (50mm thick insulation)
60
-
-
... More
80mm dia. (50mm thick insulation
60
-
-
... More
65mm dia.(50mm thick insulation)
50
-
-
... More
50mm dia.(50mm thick insulation)
400
-
-
... More
40mm dia. (50mm thick insulation)
500
-
-
... More
32 mm dia(50mm thick insulation)
350
-
-
... More
25 mm dia(50mm thick insulation)
900
-
-
... More
20 mm dia(50mm thick insulation)
10
-
-
... More
INSULATED VALVES
Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately upported as per specifications.
BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot water circulation as specified
200 mm dia.
-
-
-
... More
150 mm dia.
2
-
-
... More
125 mm dia.
18
-
-
... More
100 mm dia.
10
-
-
... More
80 mm dia.
-
-
-
... More
65 mm dia.
-
-
-
... More
50 mm dia.
10
-
-
... More
40 mm dia.
-
-
-
... More
32 mm dia.
-
-
-
... More
25 mm dia.
10
-
-
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
200 mm dia.
-
-
-
... More
125 mm dia.
-
-
-
... More
100 mm dia.
-
-
-
... More
80 mm dia.
-
-
-
... More
65 mm dia.
-
-
-
... More
50 mm dia.
-
-
-
... More
40 mm dia.
-
-
-
... More
32 mm dia.
-
-
-
... More
NON - RETURN VALVE with duel plate of C I body SS plates anized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.
125 mm dia.
-
-
-
... More
Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified.
150 mm dia.
1
-
-
... More
125 mm dia.
-
-
-
... More
100 mm dia.
-
-
-
... More
80 mm dia.
1
-
-
... More
65 mm dia.
-
-
-
... More
50 mm dia.
-
-
-
... More
40 mm dia.
-
-
-
... More
32 mm dia.
-
-
-
... More
Providing and fixing in position the industrial type pressure gauge with gun metal/ brass valves complete as required
30
-
-
... More
Providing & fixing in position the mercury in glass industrial type themetreometre complete as required
24
-
-
... More
CONDENSER WATER PIPE
Supplying, fixing, testing and commissioning of condenser water pipes of following sizes of MS ‘C’ class along with necessary clamps, vibration isolators and fittings such as bends,tees etc.but excluding valves, strainers, gauges etc. adequately supported on rigid supports duly painted/buried in ground excavation and refilling etc. as per specification and as required complete in all respect.
Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. And from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.
250 mm dia.
180
-
-
... More
150 mm dia.
100
-
-
... More
100 mm dia.
60
-
-
... More
VALVES WITHOUT INSULATION
Supplying, fixing, testing and commissioning of following size valves, gauges and strainers for condenser water circulation as per specifications.
BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile sheet & O-ring & PN 16 pressure rating as specified.
250 mm dia.
-
-
-
... More
150 mm dia.
18
-
-
... More
100 mm dia.
-
-
-
... More
NON - RETURN VALVE with dual plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating as pecified.
150 mm dia.
-
-
-
... More
Supply, installation, testing and commissioning of Pot - Strainer (sspl) of the following sizes confometreing to standard specification. 250 mm dia
-
-
-
... More
BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified.
150 mm dia.
-
-
-
... More
Supply, installation, testing and commissioning of common pressure guage across the chilled water supply / return to AHU only as per specification.
-
-
-
... More
Supply , installation , testing and commissioning of condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting 25 mm thick EPS insulation etc. as required confometreing to standard specifications and of following sizes. 25 mm dia pipe
60
-
-
... More
32 mm dia pipe
60
-
-
... More
50 mm dia pipe
80
-
-
... More
Supply, installation, testing and commissioning of auto air vent valve of following sizes:- 12 mm dia auto air vent valve
25
-
-
... More
Supply, installation, testing and commissioning of motorised On / off Butterfly valves ( Duly Insulated 50 mm thick EPS ) with modulating motor in Supply & return chilled & Condense water line in chiller , AHU water line, cooling Towre & AHU Operated through BMS & Of folloowing Sizes. 25 mm dia
1
-
-
... More
32 mm dia
-
-
-
... More
40 mm dia
-
-
-
... More
50 mm dia
-
-
-
... More
65 mm dia
-
-
-
... More
100 mm dia
-
-
-
... More
125 mm dia
-
-
-
... More
150 mm dia - Non insulated Valve
-
-
-
... More
250 mm dia - Non insulated Valve
-
-
-
... More
DUCTING, GRILLS,DIFFUSER AND INSULATION
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and pecifications of following sheet thickness complete as required.
Thickness 0.63 mm sheet
800
-
-
... More
Thickness 0.80 mm sheet
600
-
-
... More
Thickness 1.00 mm sheet
450
-
-
... More
Thickness 1.25 mm sheet
180
-
-
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
38
-
-
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
35
-
-
... More
Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.
20
-
-
... More
Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.
-
-
-
... More
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
Damper
-
-
-
... More
Actuator
16
-
-
... More
Supplying & fixing of powder coated Linear extruded aluminium Supply / Return Air Grills with aluminium volume control dampers as per specifications.
150 mm
750
-
-
... More
Supplying & fixing of Fresh air intake louvers with bird screen dampers (Aluminium extruded only).
-
-
-
... More
Supplying and fixing of acoustic lining of duct with Open Cell Nitrile Rubber density 140-180 kg/m³. Applied by Adhesive, confometreing to standard specification. 10 mm thick open cell nitrile rubber.
600
-
-
... More
15 mm thick open cell nitrile rubber.
260
-
-
... More
Supplying and fixing of external themetreal insulation on ducts with Closed Cell Cross Linked Polythylene (XLPE) Foam of density 33 kg/m³ with 13 mm hick & themetreal Conductivy not exceding 0.035 W/mK at an average Temperature of 40°C. The Material Shall be rated as Class O, As per BS476 Part 7 , The Smoke Density as per AS - 1530.3 Shall not exceed 1. The Material shall have Fire Approval from CBRI - Roorkie & no toxicity under flaming and non- flaming condition as per AITM 3.000 (1993) . Adhesive used for setting the insulation shall be non - flammable, Vapour Proof. All Joints should be sealed with 3 mm thick 50 mm wide PE tape and Flange to be overlapped by 6" width of the same material thickness. Finally Duct insulated should be strapped by 12 mm Plastic Packing strip at every random metre and confometreing to standard Specification
13 mm thick Closed Cell Cross Linked Polythylene( XLPE) Foam with Factory Laminated Al PE Foil for Supply / Return Air Duct
1200
-
-
... More
CUBICAL PANEL BOARD ( BMS Compatable ) For
i) 130 TR Actual Water-Cooled Screw Chilling Machine ( 2W+1S)
ii) 15.0 KW CDW Pumps (2W+1S)
iii) 5.5 KW (150 TR) Cooling Tower (2W+1S)
iv) 3.7 KW P.CHW Pumps (2W+1S)
v) 15.0 KW S.CHW Pumps (2W+1S) vi) 100 KW HWG (2W+1S) - Winter Heating Supply, installation, testing and commissioning of non draw out Cubical type sectinalised & Compartmentalised floor standing powder coated switch board of 31 MVA fault capacity at 415 V complete with 4 strip, 630 A capacity Aluminium Bus - Bar Electrolytic grade,cable alley & supplying & fixing of following switchgears as per specifications including connections & interconnections.
A) INCOMER
i) 02 no - 630 A FP MCCB Microprocesser ased adjustable protection relays type with overload,short ckt.,earth fault protection release & under voltage protection, selector switch, 96mm ammetre & 96mm Voltmetre with selector switches, phase indication light with protection fuse,on / off / trip indicating light with Protection Fuse. ACB shall be of 50 KA (Icu = Ics).
ii) Bus Coupler
01 no - 630 4 Pole MCCB manually operated type Bus Coupler. MCCB shall be of 50 KA iii) Incomers and bus coupler shall be mechanically electrically interlocked with one set of castle key interlocking system ( 3 locks and 2 keys )interlocked to avoid paralleling of the two supplies.
B) OUTGOINGS
For 3 no 130 TR Screw Water Chilling Machine
03 no - 200 A FP MCCB Themetreal Maganitic release adjustable type with overload,short ckt.,Protection, on/off /trip indicating light with Protection Fuse. MCCB shall be of 50 KA (Icu = Ics). For 3 no 15 KW Condenser Water Pumps.
03 no - 40 A TP MCCB with Confometreing to BIS ( As per Type 2) star Delta starter, overload relay, start/stop push buttons, ammetre (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. MCCB shall be of 50 KA.
-
-
-
... More
SUB HEAD 2.4 - ELECTRICAL WORK
For 3 no 3.7 KW P. Chilled Water Pumps.
03 no - 40 A TP MCCB with Confometreing to BIS star Delta starter, overload relay, start/stop push buttons, ammetre (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. MCCB shall be of 50 KA. For 3 no 15.0 KW S. Chilled Water Pumps.
03 no - 40 A TP MCCB with Confometreing to BIS star Delta starter, overload relay, start/stop push buttons, ammetre (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. MCCB shall be of 50 KA. For 3 no 5.5 KW - Cooling Towers.
03 no - 40 A TP MCCB with Confometreing to BIS star Delta starter, overload relay, start/stop push buttons, ammetre (0-40A) with three CT, on / off / trip indication lights with protection fuse, single phase preventer. MCCB shall be of 50 KA.
For 03 no 100 KW HWG for Winter Heating
03 no - 250 A TP MCCB with on / off / trip indication lights MCCB shall be of 50 KA
Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears REMOTE CONTROL CONSOLE
Supply, installation, testing and commissioning of flour mounted desk type control console with mimic diagram comprising of Start / stop push buttons, status indication i.e. on / off / trip for 3 no Water-cooled Chilling M/c, 3 no Condenser Water Pump Sets, 6 no Chilled water Pump Sets, 03no Cooling Tower,08no AHUs, 10 no spare etc. as per specification. Common faults for each chiller such as flow switch with associated relays hooter, fault accept & reset arrangements shall be as per specification.
-
-
-
... More
SUB - PANELS FOR AIR HANDLING UNITS ( BMS Compatable ) Supply , installation , testing and commissioning of wall mounted switch board as detailed below & confometreing to the specification. Including connections & interconnection etc as required. AHU Sub Panel - Supply Air Blower ( Up to 7.5 KW)
01 no - 40 A TP MCB with Confometreing to BIS 25A Direct on Line starter, overload relay, start/stop push buttons, ammetre (0-40A) on / off / trip indication lights with protection fuse, single phase preventer.
-
-
-
... More
AHU Sub Panel - Supply Air Blower ( 10.0 KW)
01 no - 40 A TP MCB with Confometreing to BIS 25A Star delta starter, overload relay, start/stop push buttons, ammetre (0-40A) on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears
-
-
-
... More
POWER & CONTROL CABLING
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, steel ametreoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 40x3 mm MS flat clamp and steel dash fastener/ G.I. bolts and nuts as required.
3.5C x 150 Sq. mm
350
-
-
... More
Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, steel ametreoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as required.3.5C x 25 Sq. mm
350
-
-
... More
3 x 16 sq. mm
200
-
-
... More
3 x 10 sq. mm
600
-
-
... More
Earthing Strip / Wires.
Providing and fixing 25 x 5 mm G.I. strip on surface or in recess for connection etc as required.
350
-
-
... More
Providing & fixing 6 SWG GI wire on surface or in recess , along with the exiting surface / recessed conduit / submain.as required.
1600
-
-
... More
Supplying and installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5% in convenient sections,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired. 150 mm width x 50 mm depth x 1.6 mm thickness
200
-
-
... More
300 mm width x 50 mm depth x 1.6 mm thickness
60
-
-
... More
600 mm width x 50 mm depth x 1.6 mm thickness
40
-
-
... More
Supplying and installing following size of perforated pre-painted M.S cable trays bends with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired. 150 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
300 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
600 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
Supplying and installing following size of perforated pre-painted M.S cable trays reducers with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as requuired. 150 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
300 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
600 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
Supplying and installing following size of perforated pre-painted M.S cable trays Tee's with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
300 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
600 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
Supplying and installing following size of perforated pre-painted M.S cable trays cross members with perforation not more than 17.5% ,joined with connectors,suspended from the ceiling with M.S suspenders including bolts & nuts,painting suspenders etc as required. 150 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
300 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
600 mm width x 50 mm depth x 1.6 mm thickness
-
-
-
... More
Supplying and making end temetreination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE Aluminium condotor cable of 1.1 KV grade as required. 3 x 10 Sq. mm
59
-
-
... More
3 x 16 Sq. mm
20
-
-
... More
3.5 x 35 Sq. mm
10
-
-
... More
3.5 x 120 Sq. mm
-
-
-
... More
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.3 pole MCCB, 100A, Adjustable Themetreal - Magnetic Release, 25KA
-
-
-
... More
Supply installation, testing and commissioning of Inline Fan directly coupled TEFC Sq.cage induction motor (F-class insulation & B-class Temp. rise) suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc.
Toilet Exhaust Inline Ventilation fan
Air Qty. = 100 CFM Static Pressure = 6mm Wg
Fan Speed = not exceeding 700 rpm
Motor = 0.1 KW
Fan Dia = 300 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
101
-
-
... More
Toilet Exhaust Inline Ventilation fan
Air Qty. = 300 CFM Static Pressure = 10mm Wg
Fan Speed = not exceeding 700 rpm
Motor = 0.5 KW
Fan Dia = 300 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Toilet Exhaust Inline Ventilation fan
Air Qty. = 500 CFM Static Pressure = 10mm Wg
Fan Speed = not exceeding 700 rpm
Motor = 0.5 KW
Fan Dia = 300 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
27
-
-
... More
Toilet Exhaust Inline Ventilation fan
Air Qty. = 1000 CFM Static Pressure = 14 mm Wg
Fan Speed = not exceeding 700 rpm
Motor = 0.5 KW
Fan Dia = 400 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Supply installation, testing and commissioning of Tube Axial fan confimetreing to IS-3588 (revised) complete with tube casing in MS/GI standard construction epoxy painted, impeller with adjustable blade angles, bird screen ,gravity louvers, fire retardent double fold moisture and fire proof with flame retardent fabric confimetreing to IS-206 (revised) fire retardent flexible connection, necessary nut bolts and directly coupled TEFC Sq.cage induction motor (F-class insulation & B-class Temp. rise) suitable for 415V±10%, 50 Hz. 3 phase electric supply complete with required hardware etc.
Fresh Air Ventilation fan - STP
Air Qty. = 2500 CFM Static Pressure = 20mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 1.1 KW
Fan Dia = 600 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Exhaust Air Ventilation fan -STP
Air Qty. = 3000 CFM Static Pressure = 20mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 1.1 KW
Fan Dia = 600 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Fresh Air Ventilation fan- LT Room
Air Qty. = 2500 CFM Static Pressure = 20mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 1.1 KW
Fan Dia = 600 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Exhaust Air Ventilation fan- LT Room
Air Qty. = 2500 CFM Static Pressure = 20mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 1.1 KW
Fan Dia = 600 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Exhaust Air Ventilation fan - Kitchen Corridor
Air Qty. = 10000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 5.5 KW
Fan Dia = 800 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Exhaust Air Ventilation fan- Corridor Floor
Air Qty. = 5500 CFM Static Pressure = 20mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 2.2 KW
Fan Dia = 600 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Exhaust Air Ventilation fan - Atrium
Air Qty. = 6500 CFM Static Pressure = 25 mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 3.7 KW
Fan Dia = 600 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
-
-
-
... More
Lift Well Pressurisation (Terrace)
Air Qty. = 10000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 3.7 KW
Fan Dia = 800 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
Tube Axial Fans as described above.
-
-
-
... More
Lift lobby & Starircase Pressurisation (Terrace)
Air Qty. = 16000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 1450 rpm
Motor = 3.7 KW
Fan Dia = 800 mm (Approx.)
Noise level = not exceed 90 db at 1 metre distance
Tube Axial Fans as described above.
Supply installation, testing and commissioning of DIDW/SISW backward curved non overloading type Centrifugal blower in MS/GI standard construction epoxy painted complete with TEFC Sq.cage induction motor confimetreing to IS-325 (Revised) suitable for 415V±10%, 50 Hz. 3 phase electric supply, MS channel base, housing drain plug, V-belt drive comprising of fan & motor pullies and one set of belts, slide rails, belt protection guard, multilouvered dampers and fire retardent double fold moisture and fire proof with flame retardent fabrik confimetreing to IS-206 (revised) flexible connection with nut bolts at outlet, vibration isolators, foundation bolts & bird screen etc complete with required hardware.
-
-
-
... More
Basement Smoke Exhaust Ventilation fan
Air Qty. = 30000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 750 rpm
Motor = 12.5 KW
Air Discharge = Side / Top
Noise level = not exceed 82 db at 1 metre distance
-
-
-
... More
Basement Fresh Air Ventilation fan
Air Qty. = 27000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 750 rpm
Motor = 15 KW
Air Discharge = Side / Top
Noise level = not exceed 82 db at 1 metre distance
-
-
-
... More
Basement Smoke Exhaust Ventilation fan
Air Qty. = 27000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 750 rpm
Motor = 15 KW
Air Discharge = Side / Top
Noise level = not exceed 82 db at 1 metre distance
-
-
-
... More
Terrace Ventilation fan - SISW Air Qty. = 1000 CFM Static Pressure = 25mm Wg
Fan Speed = not exceeding 750 rpm
Motor = 5 KW
Air Discharge = Side / Top
Noise level = not exceed 82 db at 1 metre distance
-
-
-
... More
Sub Panel- Supply /Exhaust Air Blower up to 7.5 KW)
( BMS Compatable)
01 no - 40 A TP MCB with Confometreing to BIS 25 A DOL starter, overload relay, start/stop push buttons, ammetre (0-63A) on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears
21
-
-
... More
Sub Panel- Supply /Exhaust Air Blower up to 20.0 KW)
( BMS Compatable)
01 no - 100 A TP MCCB with Confometreing to BIS 63 A Star Delta starter, overload relay, start/stop push buttons, ammetre (0-100A) on / off / trip indication lights with protection fuse, single phase preventer. Controls & interlocking accessories as Complet with Connection / interconnection required for above switchgears
4
-
-
... More
AUDIO SYSTEM
Supply,Installation, Testing, Commissioning, Training & Programming (SITC) of full-range, Column speaker designed for background music and speech reproduction in a wide range of installed applications. Wide, even 140° conical pattern and frequency range down to 80 Hz. Frequency Response (+/-3 dB):-95 Hz - 17 kHz, Frequency Range (-10 dB):80 Hz - 19 kHz, Nominal Dispersion:140° conical, Long-Temetre Power Handling:16 W (64 W peak)
4
-
-
... More
Wall Brackets : Brackets/Mounting arrangments for mounting above speakers .
4
-
-
... More
SITC of integrated zone amplifiers :-Amplifier Power 1 x 90W @ 70/100V, Frequency Response ,60 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz), THD+N :-≤1 % (at full rated power), Dynamic Range :- 88 dB
2
-
-
... More
Mixing Console : 16 channel mixing console (with Effect) of 10 mono inputs & 4 stereo inputs; 24-bit DSP effects for 99 presets ; Frequency response : 20Hz - 20kHz; Total hametreonic distortion(THD-N) of 0.03%; 6 single-control dynamic compressors; Phantom power : +48V; Internal power supply; Power consumption : 50W.
1
-
-
... More
Wireless Handheld Microphone : Vocal Set with cardioid dynamic capsule for excellent feedback rejection ;10 hours of operation ; Mute button for full speech control ; Synchronization via RF remote channel ; Frequencies tunable in steps of 25 kHz ; 8 frequency banks with each max 12 presets ; THD, total hametreonic distortion 1 % ; Signal-to-noise ratio 103 dB(A) .
1
-
-
... More
Wireless Lapel Microphone : Wireless Lapel/Collar Mic with Compact bodypack system, with omnidirectional lavalier mic, offering excellent speech intelligibility ; Synchronization via RF remote channel ; Frequencies tunable in steps of 25 kHz ; 24 MHz bandwidth ; 8 frequency banks with each max 12 presets ; THD : 1 % ; Signal-to-noise ratio 103 dB(A) ; RF output power typ. 10 mW.
1
-
-
... More
Gooseneck Microphone with table top on/off switch : Cardioid polar pattern; Frequency Response: 50 Hz to 20 kHz; Impedance 100 Ohms; Max Sound Pressure level: 130 dB; RF shielding against intemetreodulation from wireless devices with MAT 133-S: a table stand with microphone modes like Toggle on/off, Push to mute, Push to talk.
1
-
-
... More
Connectors : Supply of UL Listed Connectors
1
-
-
... More
Speaker Cable : 2 core 2.5 Sq mm insulated Cu conduction sheilded Speaker cable.
100
-
-
... More
Microphone Cable : 2 core shielded insulated Cu conduction sheilded microphone cable.
100
-
-
... More
VIDEO SYSTEM
STIC OF 5000 ANSI Lumens bright ; XGA resolution ; Inputs : HDBase T ; VGA, Video, 2xHDMI , USB type A & B; Powered Zoom / focus / Lens shift ; 500000:1 contrast ratio ; 16w audio; Light source LED ; Life : 20000 hours.
1
-
-
... More
SITC OF Mounting/Hanging arrangement of above Projector.
1
-
-
... More
SITC 8' x 5', 16 : 9 matt white motorised projection screen with cordless remote control
1
-
-
... More
SITC 15 metre HDMI-HDMI Cable
1
-
-
... More
SITC 15 metre VGA-VGA Cable
1
-
-
... More
SITC OF Equipment Rack for housing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; internal lights; movement wheels, power distribution units etc.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements