NMDC Limited Tender

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulatad cooper conductor, single core cable in surface/recessed medium claas PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

3 X 2.5 sq. mm

Supplying and fixing following sizes of meduim class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25 mm

Supplying and fixing of following modular switch /socket on the existing modular plate and switch box including connections but excluding modular plate etc as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required. (85 new fans + Old regulators are non modular type which needs to be replaced with Modular one.)

Supplying and fixing following size/module, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mmX75mm)

12 Module ( 200mmX150mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recces, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recces, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch connection etc. as required.

Supplying and fixing 3 pin, 5 A ceiling roce on the existing junction box/ wooden block including connectionsetc. as requiqred.

Suppling and fixing brass batten/ angle holder including connection etc. as required.

Installation , Testing , Commissioning of wall bracket/ ceiling fitings of all sizes and shapes containing upto two GLS/CFL/LED lamp per fiting, complete with all accessories including connections etc. as required.

Installation , testing commissioning ofceiling fan, including wiring the down of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, cooper conductor, single core cable etc.as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB ditribution board, 240 V , on surface/recess, complete with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolatar)

6 Way, double door

Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB dustribution board, 415 V , onsurface/recess, complete with tinned copper bus bar, neutral bus bar earth , din bar, interconnections, powder painted including earth etc. as required.

4 Way (4+12), double door

Supplying and fixing following rating, four pole, 415 V , isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 A

100 A

Supplying and fixing cable end box (loose wire box) suitable for following triple pole and neutral, sheet steel, MCB ditribution board 415 V , on surface/recess, complete with testing and commissioning etc.as required.

For 8 Way, Double door TPN MCBDB

Supplying and fixing 5 A to 32 A rating 240/415 V, 10kA, "C'' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with, connections, testing and commissioning etc. as required.

Single pole mcb

Double pole mcb

Supplying and fixing rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and and commissioning etc. as required.

40 A

Supplying and fixing of modular blanking plate on the existing modular plate and switch bos excluding modular plate as required.

Earting with GI earth pipe 4.5 Mtr long 40 mm dia including accessories , and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with Charcoal/ coke and salt as required.

Providing and fixing 25mmx5mm GI strip on surface or in recess for connections etc, as required

Providing and fixing of 6 SWG dia GI wire on surface or in recess for loop earthing along with existing surface /recess conduit/ submain wiring/ Cable as required.

Supply of 20 watt led batten, 230 Volts AC, 1150 mm length

Supply of 1200 mm ceiling fan , double ball bearing, hum free white colour, BEE star rating 5.

Supply of 12 watt led Sqare Panel of size 170x170mm recessed luminaire

Supplyof 300 mm exhaust fan , 4 pole, 3/4 blade, 230 vplts, single phase Capacitor type , ISI marked product.

Supply of 9/10 watt garnden light , Bollard type, pole and LED lantern

Supply of 230 Volts AC, 70/ watt led street light fitting, lumen output 100 to 130 lm/watt, IP66,

Supply of 25 watt LED light, with lumen/watt 100lm/watt, IP66

Supply, installation testing and commissioning of 25 Ltrs Storage type, with Vitreous enamelled inner tank, BEE star rating 4, Tank capacity 25 ltrs Water gyser ( @10% of material cost taken for installation, testing and commissioning INCLUDING CP&OH.7990+799=8789)

supplying erection testing and commissioning of hot dipped galvanised (single dip 86 micron) 16 mtrs Highmast pole on existing RCC foundation with all accessories and equipments, detailled as below withstand wind presure upto 180 km/hrand minimum following specifications: a) HM shapt made of not more than 2 sections of suitable lengths with telescopic stressfit joint between sections without any circumpherencial welding, sheet thicness 4 mm to and bottom sections, nominal dia 460mm on bottom and 150mm on top, base flange 25mm thick 670mm dia , PCD of foundation bolts 650mm. b) Double drum winch for lowering & raising of lantern carriage on High mast with opreratable with power tool/ manual handle attachment with a torque limiting device for safe locking of carriage. c) Raising/ lowering type lantern carriage disigned to carry specified nos of luminarles , control gear box, junction box. e) 3 Nos suitable length and size stainless steel wire ropes (minimum 6mm dia and 7/19 contruction) for lowering and raising of lantern carriage. f) suitable size and length multicore flexible copper power trailing cable (minimum 3 core 4 sqmm) g) Hinged service door in base section h) Base plate earthing terminal. i) Suitable aarangement for supply distribution with termination of suitable size underground cable in High mast. j) Lighting conductor finial made of 25mm dia 300mm long G.I. tube having single prong. k) Anchor plate of size 840x 840x6mm , tem-plates 3mm thick, G.I. foundation bolts 8 nos of 30mm dia 850mm long (EN 8

Supplying of 250 watt LED flood light fitting of reputed make

Installation of 250 Watt LED fittings on 16 mtr High mast lantern carriage @ 15% of material including CP&OM

Gross Total Amount

Prices must be filled in the exact same format as given above. Any variation in format, description, unit, quantity or T&C, if noticed, may lead to rejection of the bid.

In case some or many of the items of BOQ are left blank, the offer and subsequent evaluation shall be treated as per the manner specified in Corporation's manuals.

In case of discrepancy between rates and amount quoted above, the quoted rates shall prevail and appropriate corrections shall be made by corporation during evaluation.

Adjustments made by the Corporation as a part of Correction of Errors in the quoted BOQ, shall be final and binding upon the bidders. If a bidder does not except the corrected calculation, their bid shall be rejected.