NMDC Limited Tender

Wiring for 5/6 ampere same board power point with supplying and fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet`and 5/6 modular switch, connection etc as required Complete in all respect.

Wiring for 15/16 ampere power point supplying with fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 modular switch Complete in all respect. Rates are equal for short, medium and long points.

In case of discrepancy between rates and amount quoted above, the quoted rates shall prevail and appropriate corrections shall be made by corporation during evaluation.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground or over surface as per requirement asstrip earth electrode, including connection/ terminating with nut, bolt, spring, washerstrip earth electrode, including connection/ terminating with nut, bolt, spring, washeretc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nutbolt & spring washer spaced at 50mm)

Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.

Wiring for Circuit with PVC insulated multistrand (approved make ) 3 x 4 sqmm copper wires for Phase/ Neutral & Earthing in PVC channel Casing Caping system of suitable size or concealed in the wall/panel through pipe. The work includes all the required materials and terminations at both ends.

Supplying and fixing 20 Amps, 240 Volts,SPN industrial type,socket outlet,with 2 pole and earth,metal enclosed plug top alongwith 20 amps "c"curve SP, MCB in sheet enclosure on surface or nin recess,with chained metal cover for the socket outlet and compete with connections,testing and commissioning etc as required

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long,G.I. tube, having single prong at top,with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Supplying,installation,testing and commisioning of 1.5 Ton, Split type Air Conditioner, conforming to IS:1391 (Part-2) -1992 and certified by BEE with latest amendments fitted with rotary hermetic compressor with overload protection, operating on refrigerant R-22 / non-CFC, suitable for high wall mounting, copper condesor coil,with cordless remote control provided with on / off timer and with digital display on indoor unit, suitable for operation on 230V - 250V, 50Hz, Single phase AC Supply, capable of performing the functions as cooling, dehumidifying, air circulating & filtering alongwith required inlet,discharge copper pipe,iron bracket,. The AC shall conform to the following technical parameters. a) Power Consumption - 1750 W (Maximum). b) Cooling Capacity - 4500 W (Minimum). c) Energy Efficiency Ratio - 3.30 (Minimum) d) BEE Star rating (Minimum) - 5 Star Make: Voltas/Blue Star/Carriar/Hitachi

Supply & Fixing of LED Downlighter 18 watt with diffuser, reflector, driver complete in al respect.Minimum Watage 18 Watt,Minimum lumens-2000,6500K. Make Philips/GE/CG/Havells/Halonix/wipro

Note:

Supply of Double ball bearing,Ceiling fan(1200mm), as per the approved make. Complete with down rod, canopy, hanging shackle, blades etc . Make USHA/ CG/Khaitan/Anchor.

Wiring for Circuit with PVC insulated multistrand (approved make ) 3 x 2.5 sqmm copper wires for Phase/ Neutral & Earthing in PVC channel Casing Caping system of suitable size or concealed in the wall/panel through pipe. The work includes all the required materials and terminations at both ends.

Wiring with 4 Sqmm PVC insulated,multistranded 650V grade (approved make )Copper wires for 5/6 ampere saparate board power point with supplying and fixing suitable size GI box with modular plate & cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outletand 5/6 modular switch Complete in all respect. Rates are equal for short, medium and long points.

Supply and fixing of Vertical TPN 8 way (8nos.TP or 24 nos.SP outgoing)Double Door DB, IP43/42 with following arrangements, 1. 100Amps MCCB,3pole,16k Amps Br.Capacity, as incomer.-1 no. 2. MCB ,3 pole, 32Amps , as outgoing ---6nos. 3. MCB ,1 pole,25Amps , as outgoing ---4nos. 4. MCB ,1 pole,10 Amps , as outgoing ---2 nos With Neutral/Earthing distribution links.The DB has to be fixed on the wall, as per the site condition. Complete in all respect.All the MCBs Shall be of "C" Characteristic and Breaking Capacity should be 10KA.

Adjustments made by the Corporation as a part of Correction of Errors in the quoted BOQ, shall be final and binding upon the bidders. If a bidder does not except the corrected calculation, their bid shall be rejected.

Supply and fixing of 2.0" Dia, ISI marked, ‘B’ Class GI pipe for taking the cables from the ground to the Wall, for road/nalla crossing of the cables and for making Brackets for fixing Street Light Fittings etc.

Prices must be filled in the exact same format as given above. Any variation in format, description, unit, quantity or T&C, if noticed, may lead to rejection of the bid.

Undergrounding of XLPE/PVC insulated, Armoured, sheathed, 1.1 KV grade of size upto 4x 185 Sqmm. Power Cable/upto 100 Pair Telecom Cable direct in ground including excavation, sand cushioning, protective covering with bricks on both the sides & Top, refilling the trench, masonry works required for crossing Nallah/Walls, termination of all the ends with cable glands etc.The work includes all the neccesarry materials except the Cables.

Point wiring with modular switch,modular plate,suitable GI Box for : Light, Fan, Call bell, Emergency light system and telephone connections with continuity of circuit . The wiring shall be done as per the following site condition, 1. According to the false ceiling design. 2.Concealed in existing wall / roof / Floor using suitable sizes of PVC pipes, junction boxes etc.(wherever required) 3. Channel Casing Caping system in white Colour (wherever required)

Wiring with 1.5 Sqmm PVC insulated,multistranded 650V grade (approved make )Copper wires for Light, Fan & Calling Bell Ckts. Leaving sufficient length of loose wires. The work includes all the items like modular switch, modular plate, suitable GI box, modular base & cover plate, Wires, PVC Casing Capping, PVC Pipes, Ceiling rose & other materials. Complete in all respect. Earthing with 1.5 Sqmm PVC insulated Copper wires. Rates are equal for short, medium and long points. All the Switch boards for controlling the Lights and fans shall be accomodated/fixed on the available concreate Pillars and the wirings for the same shall be concealled in the pillars.All the wires to be connected to the Modular Switch Boxes.

Supplying & fixing stepped type electronic fan regulator on existing modular plate switch box including connection as required.As per the approved make.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick includingaccessories, and providing masonry enclosure with cover plate having lockingarrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and saltas required.