NMDC Limited Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
NMDC Limited - NMDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Nov 2024
Closing Date2 Dec 2024
Tender Amount₹ 3,16,29,676
Costs
EMD
₹ 3,16,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Works Bacheli Cpm3 Dep05 Biom New Min Office 009
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NMDC_777173_1Tender No
Works Bacheli CPM3 Dep05 BIOM New Min Office 009Tender Authority
NMDC Limited ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Hard rock (blasting prohibited)
128
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
11
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. Hard rock (blasting prohibited)
11
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
65
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and
reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
153
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
109
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).
295
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically treated bars
grade Fe-500D or more
66840
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
122
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings,
balconies and access platform.
1349
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
894
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral
staircases
71
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for
Columns, Pillars, Piers, Abutments, Posts and Struts.
884
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
123
-
-
... More
Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 150 mm to 200 mm thick with Grade-I AAC blocks of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure above plinth \evef up to floor V level in cement mortar 1:4 (1 cement: 4 coarse sand).
240
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
688
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 coarse sand)
1125
-
-
... More
6mm cement plaster to of mix:
1:3 (1 cement: 3 Fine sand)
1472
-
-
... More
12 mm cement plaster of mix
1:4 (1 cement : 4 coarse sand)
1125
-
-
... More
Rough cast plaster upto 10 m height above ground level with a mixtureof sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement Ordinary cement finish using ordinary
cement
20
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
2250
-
-
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20 kg/10 sqm
@ 2.20kg/10 sqm
750
-
-
... More
White washing with lime to give an even shade : New work (three or more coats)
1411
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnabfe priming coat with cement primer
2250
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
688
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
151
-
-
... More
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces
688
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
47
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm
47
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
55
-
-
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x1 0x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
85
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood
1
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
49
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
50
-
-
... More
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge Extruded section profile size 42x50 mm
45
-
-
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
48
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
647
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make
conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
647
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness
44
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
690
-
-
... More
Applying prime coat
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
44
-
-
... More
Applying prime coat
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
52
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
96
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Twin rubber stopper
24
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
129
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 x 10mm
63
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250 x 10mm
111
-
-
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378)
300 x 16 mm
24
-
-
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : (copper oxidized as per IS: 1378)
115mm
47
-
-
... More
Providing and fixing bright finished brass hard drawn hooks and eyes :
150 mm
70
-
-
... More
Grading roof for water proofing treatment with
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)
17
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion
110 mm diameter
280
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Shoe (Plain) 110 mm Shoe
20
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110mm
40
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5 Degree
20
-
-
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
360
-
-
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
12
-
-
... More
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
30
-
-
... More
TOTAL OF SCHEDULE- A
-
-
-
... More
SCHEDULE - B
-
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
25 mm dia nominal bore
35
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
15 mm dia nominal bore
70
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
25 mm dia nominal bore
84
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
50 mm dia nominal bore
50
-
-
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :
25 mm nominal bore
4
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
10
-
-
... More
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
10
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore
6
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
50mm nominal bore
2
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
15mm nominal bore
6
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm Length
15 mm nominal bore
6
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
6000
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
15 mm nominal bore
15
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
25 mm nominal bore
10
-
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
50 mm nominal bore
4
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
100 mm diameter
12
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
50 to 80 mm nominal bore
4
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
4
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm dia
50
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
100 mm dia
80
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
150 mm diameter S.W. pipe
50
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
100 mm diameter S.W. pipe
30
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
6
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
Kitchen sink with drain board
510x1040 mm bcwl depth 250 mm
1
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls wherever require:
630x450 mm with a single 15 mm C.P. brass pillar tap
7
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
7
-
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
7
-
-
... More
Providing and fixing soil, waste and vent pipes :
100mm dia
Sand cast iron S&S as per IS : 3989
42
-
-
... More
Providing and fixing soil, waste and vent pipes : 75mm dia
Sand cast iron S&S as per IS : 3989
42
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
100mm dia
56
-
-
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter :
75mm dia
32
-
-
... More
Providing and fixing plain bend of required degree.
100mm dia
Sand cast iron S&S as per IS : 3989
12
-
-
... More
Providing and fixing plain bend of required degree.
75mm dia
Sand cast iron S&S as per IS : 3989
12
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete
100 MM DIA
Sand cast iron S&S as per IS : 3989
16
-
-
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete 75 MM DIA
Sand cast iron S&S as per IS : 3989
16
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
100x100x100 mm
Sand cast iron S&S as per IS - 3989
6
-
-
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 75x75x75 mm
Sand cast iron S&S as per IS - 3989
6
-
-
... More
Providing and fixing collar : 100mm
Sand cast iron S&S as per IS - 3989
24
-
-
... More
Providing and fixing collar : 75mm
Sand cast iron S&S as per IS - 3989
16
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 100mm dia pipe
24
-
-
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 75mm dia pipe
24
-
-
... More
Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost of
cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet
Sand cast iron S&5 as per lS - 1729
20
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 1 90 gms.
12
-
-
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
100x100x100x100 mm Sand cast iron S&S as per IS - 3989
4
-
-
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
75x75x75x75 mm
Sand cast iron S&S as per IS - 3989
4
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15mm nominal bore
12
-
-
... More
Constructing AAC Block masonry manhole with 200mm thick waft in cement monar 1:4 (1cement:4coarse sand), 150mm thick R.C.C top slab with 1:2:4 mix (1cement: 2coarse sand: 4 graded stone aggregate 20mm nominal size), 200mm thick founadtion concrete 1:4:8 mix (1cement: 4coarse sand: 8graded stone aggregate 40mm nominal size), 15mm cement plastering on inside walls with cement mortar 1:3 (1cement: 3coarse sand) finished with a floating coat of neat cement and outside with 12mm cement plaster with 1:4 (1cement: 4fine sand) and making channels in cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20mm nominal size) finished with a f\oating coat of neat cement complete as per standard design. Inside size 120X90Cm and 90Cm deep including precast slab as cover with 505X660mm size (opening size: 455X610mm). with CCB\ock masonry of grade 1:5:8 (1cement: Scoarse sand: 8 graded stone aggregate 10mm and down gauge) and 50% graded stone aggregate of 100mm and down size by volume of each block with CM 1:6 (1cement:6coarse sand)
2
-
-
... More
Extra depth for manhole. Size 120x90 cm. CCBlock masonry of grade 1:5:8. (1cement: Scoarse sand:8 graded stone aggregate 10mm and down gauge) and 50°A graded stone aggregate of 100mm and down size by volume of each block with CN 1:6 ( 1cement:6coarse sand)
2
-
-
... More
TOTAL OF SCHEDULE- B
-
-
-
... More
SCHEDULE - C
-
-
-
... More
Point wiring with Modular Switch, Modular plate, suitable PVC Box for : Light, Fan, Call bell, Emergency light, Exhaust Fan with continuity of circuit wiring with 3 X 1.5 Sqmm PVC insulated,multistranded 650V grade (approved make )Copper wires in surface/recessed Steel Conduit/PVC Casing-Capping. The work includes all the items like modular switch, modular plate, suitable PVC box, modular base & cover plate, Wires, PVC Casing Capping, PVC Pipes/Steel Conduit Pipe, Ceiling rose,& other materials. Complete in all respect. Earthing with 1.5 Sqmm PVC insulated Copper wires. All the Switch boards for controlling the Lights and fans shall be accomodated/fixed on the available concreate Pillars.All the wires to be connected to the Modular Switch Boxes.
379
-
-
... More
Point wiring for 5/6 Amps Same Board power point with supplying & fixing suitable size box with Modular Plate & Cover in front on surface/recess including providing and fixing 5/6 Amps Modular Socket Outlet and 6/6 Amp Modular Switch, connections etc. as required. Complete in all respect.
164
-
-
... More
Point wiring for 5 Amps with 3x1.5 Sqmm Copper Multistand conductors for Phase, neutral & earthing on Separate Board Power Point with supplying and fixing suitable size Box with Modular Plate and Cover in front plug on surface/recess including providing and fixing 5/6 Amps Modular Socket outlet & 5/6 Amps Modular Switch, connections etc. as required. Complete in all respect.
97
-
-
... More
Supply and Fixing suitable size Box with Modular Plate and Cover in front on surface or in recess, including providing and fixing 6 Pin 5/6 & 15/16 Amp Modular Socket outlet and 15/16 Amp Modular Switch, connections etc.. As required. Complete in all respect.
113
-
-
... More
Wiring for Circuit with PVC insulated multistrand 3 x 1.5 sqmm copper wires for Phase/ Neutral & Earthing in PVC channel Casing Caping system of suitable size or concealed in wall through PVC Conduit Pipe/Steel Pipe as required. The work includes all the required materials and terminations at both ends.
490
-
-
... More
Wiring for Circuit with PVC insulated multistrand 3 x 2.5 sqmm copper wires for Phase/ Neutral & Earthing in PVC channel Casing Caping system of suitable size or concealed in wall through PVC Conduit Pipe/Steel Pipe as required. The work includes all the required materials and terminations at both ends.
4180
-
-
... More
Wiring for Circuit with PVC insulated multistrand 3 x 4 sqmm copper wires for Phase/ Neutral & Earthing in PVC channel Casing Caping system of suitable size or concealed in wall through PVC Conduit pipe/Steel Pipe as required. The work includes all the required materials and terminations at both ends.
280
-
-
... More
Wiring for Sub Main with PVC insulated multistrand 3 x 6 sqmm copper wires for Phase/ Neutral & Earthing in PVC channel Casing Caping system of suitable size or concealed in wall through PVC Conduit pipe/Steel Pipe as required. The work includes all the required materials and terminations at both ends.
550
-
-
... More
Supply and fixing of Vertical TPN 8 way (8NosTP or 24 NosSP outgoing)Double Door DB, IP43/42 with following arrangements, 1. 125 Amps MCCB, 3pole, 16k Amps Br.Capacity, as incomer---1no. 2. MCB ,3 pole, 32Amps , as outgoing ---6Nos 3. MCB ,1 pole,25Amps , as outgoing ---4Nos 4. MCB ,1 pole,10 Amps , as outgoing ---2 nos With Neutral/Earthing distribution links. The DB has to be fixed on the wall or partially/completely consealed on the wall as per the site condition. Complete in all respect.All the MCBs Shall be of "C" Characteristic and Breaking Capacity should be 10KA.
4
-
-
... More
Supply and fixing on surface/recess SPN, 12 way, Double Door Distribution Board, 240 Volts, MCB distribution board with tinned copper bus bar, common neutral link , earth bar, din bar , detachable gland , including interconnection , earthing etc. as required ,with following arrangements, 1. RCCB Having Sensitivity 30 mA,2 pole ,63 Amps Incomer --- 1 nos 2. Single pole MCB, 32 Amp,"C" series outgoing--- 6 Nos 3. Single pole MCB, 16 Amp,"C" series outgoing--- 6 Nos with Neutral/earthing distribution links. The DB has to be fitted on the required size of fabricated frame & grouted or partially/ completely consealed on the wall as per site condition, complete in all respect and as per the approved make.
20
-
-
... More
Supply & fixing of 4 Feet LED tube light with diffuser, reflector ,driver ,reflector,driver complete in all respect. Minimum watage 18 Watt,minimum lumens 2000,6500k.
33
-
-
... More
Supply of Double ball bearing, Decorative Ceiling Fan(1200mm), 5 Star rating as per the approved make. Complete with Down rod ,canopy, hanging shackle, baldes etc.
37
-
-
... More
Supply amd fixing of step type electronic Regulator on the existing switch boards including connections as required. As per the Approved make.
37
-
-
... More
Supply and fixing of Batton holder. Including all the necessary items required.
64
-
-
... More
Supply & Fixing of 14 watt LED bulb with diffuser,reflector,driver complete in al respect.Minimum Watage 14 Watt.
64
-
-
... More
Supply & Fixing of Surface/Recess Mounted 2' X 2' LED Panel with diffuser, reflector, driver complete in all respect. Minimum Wattage: 36 Watts. Minimum Lumens-2000, 6500K.
186
-
-
... More
Supply & fixing of Plastic Exhaust/Ventilating Fan ( preferable in white or any light colur) as per the approved make ,250 mm sweep. This is to be fixed on the wall in available slot. Made of hight quality engineering plastic with self closing Bank shutter (when not in use ) complete in all respect.
7
-
-
... More
Supply and fixing of 35W-40W LED Well Glass Fitting of approved make suitable for mounting on Wall/Ceiling. With necessary materials like wooden board, screws etc. As per the approved make.
30
-
-
... More
Supply & fixing of Call bell (Ding Dong) suitable for single phase, 230V, complete as required.
22
-
-
... More
Earthing with 2.5 Mtr long earth electrode made of 40mm dia. Class "B" GI Pipe having staggered holes of 10 mm dia. at 150mm interval, burried inside the ground to obtain proper earth resistance with funnel, mesh, necessary GI nuts/bolts, washers, terminals, clamp etc.The work includes all the required materials & digging of suitable pit and filling with salts, charcoal and sand in layers, all around the electrode, as per the standard practice. After settling of the soil, making 100 mm thick Solid block masonry chamber of size of 600x600 (outer to outer) x 300 mm height in cement mortar 1:6, plastered with cement mortar 1:4, 12 mm thick at out side and the chamber shall be covered with a RCC (1:2:4) slab of size of 600mm x 600mm of 50mm thick to fit on the chamber at the top.
8
-
-
... More
Supply and fixing of 25mm X 5mm GI Strip for connecting the Main DBs to the earth station.The work includes welding /clamping of strip should be bent properly and dressed according to the site condition.
300
-
-
... More
Supplying,installation,testing and commisioning of 1.5 Ton, Split type Air Conditioner with Inverter( Variable Speed) Technology conforming to IS:1391 (Part-2) -1992 and certified by BEE with latest amendments fitted with rotary hermetic compressor with overload protection, operating on refrigerant R-22 / non-CFC, suitable for high wall mounting, copper condesor coil,with cordless remote control provided with on / off timer and with digital display on indoor unit, suitable for operation on 230V - 250V, 50Hz, Single phase AC Supply, capable of performing the functions as cooling, dehumidifying, air circulating & filtering alongwith required inlet,discharge copper pipe,iron bracket,. The AC shall conform to the following technical parameters. a) Power Consumption - 1500 W (Maximum). b) Cooling Capacity - 1.5 Ton/4500 kcal/hr. c) Energy Efficiency Ratio - 3.30 (Minimum) d) BEE Star rating (Minimum) - 5 Star
30
-
-
... More
Supply and fixing of 50 mm DIA, ISI marked 'B' Class GI pipe for making brackets for fixing of flood Fitting/Street Light Fitting including all type of welding works,if required.
15
-
-
... More
Supply and fixing of 100 Dia ISI marked ,'B' class GI pipe for marking brackets for fixing of flood light fitting/Street Light Fitting including all type of welding works ,if required.
15
-
-
... More
Supply and fixing of 120 Watt LED Street Light Fitting 230V AC, 50Hz, IP66, Heat Resistant, Toughnend Glass, complete with all accessories. Driver shall have Overcurrent/Oveload and Surge protection. White LED conforming to LM 80 and Lumen Output to LM 79. Fitting arrangement should be minimum 2.5 Metres inches Dia, complete in all respect.
15
-
-
... More
Supply, Erection, Commissioning & Testing of wall mounted Outdoor Street Light Switch Box( Lighting Junction Box) of size 300mm(l) x 200mm(h) x 150mm(d) of following specifications: a) Fabricated with 1.6mm CRCA Sheet Steel b) Powder Coated c) Foamed-in gasket d) Hinged door, interchangeable LHS/RHS, opening angle 180 degree e) Mounting plate made of 2mm thick at bottom f) Cable gland plate 2mm thick at bottom g) Cam lock arrangement h) Standard wall mounting bracket. Fitted with 4 way 35mm Elmex terminal connectors, One No. 10 maps MCB, One neutral link, Rain water diverting plate on top of the box, suitable clamp for fixing on the pole/pillar/wall, cable glands of suitable size, termination of cables, connection to the fixture wirh 3 core 1.5 sqmm copper multistrand sheathed, PVC insulated cable. Complete in all respect.
15
-
-
... More
Supply, erection and commissioning of wall mounted indoor Telecom. Junction box of size of 200mm(l) x 200mm(h) x 150mm(d) of following specifications,
• Fabricated with 1.6mm CRCA Sheet Steel
• Powder coated •Foamed-in gasket
• Hinged door, interchangeable LHS/RHS,opening angle 180 degree.
• IP-66degree of protection.
• Mounting plate made of 2mm crca sheet steel.
• Cable gland plate 2mm thick at bottom.
• Cam locking arrangement.
• Standard wall mounting brackets.
Fitted with 50 way Krone IDC Module, Cable glands of suitable size, termination of cables with Krone tool and all the cable wires have to be dressed properly. The box has to be fitted on the required size of fabrIcated frame & grouted or partially/completely consealed on the wall as per the site condition. Complete in all respect.
2
-
-
... More
Supply, erection and commissioning of wall mounted indoor Street Lighting Control box of size of 500mm(l) x 400mm(h) x 200mm(d) of following specifications,
• Fabricated with 1.6mm CRCA Sheet Steel
• Powder coated •Foamed-in gasket
• Hinged door, interchangeable LHS/RHS,opening angle 180 degree.
• IP-66degree of protection.
• Mounting plate made of 2mm crca sheet steel.
• Cable gland plate 2mm thick at bottom.
• Cam locking arrangement.
• Standard wall mounting brackets. , fitted with One FP 25KA MCCB with thermal range from 40- 50 Amps , 4 way 35 Sqmm ELMEX terminal block, cable entry provision (3Nos), Earth Points (2Nos) & Panel type locking, One ML6 Type Contactor, One time switch ATREYA model, One 6 amps MCB. Complete in all respect.
1
-
-
... More
Supply and fixing of Modular type Telephone Socket Outlet (approved make) including Modular plate, PVC Box, Modular Base and cover plate.
25
-
-
... More
Supplying and drawing 4 pair 0.5 mm dia FRPVC insulated annealed copper conductor, unarmoured telephone cable along with PVC casing/capping.
500
-
-
... More
Supplying and fixing 20 Amps, 240 Volts, SPN Industrial type Socket Outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 Amps "C" curve SP, MCB in Sheet Steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
4
-
-
... More
Supplying and fixing 30 Amps, 4150 Volts, TPN Industrial type Socket Outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 Amps "C" curve SP, MCB in Sheet Steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
4
-
-
... More
Supply and Fixing of 63 Amps TP&N Disconnector Fuse Switch Unit (FSU) with the ISI marked HRC fuses including drilling holes, making connections etc. as per the site conditions, complete in all respect.
2
-
-
... More
Supplying and making End Termination with Brass Compression Gland and Aluminium Lugs for 4x50 Sq.mm PVC Insulated and PVC Sheathed/XLPE Aluminium conductor cable of 1.1kV grade.
50
-
-
... More
Supplying and Laying of XLPE/PVC insulated, Armoured, Sheathed, Aluminium Power cable of the size of 4CX50 sqmm, along the cable tray/Sheet Wall/through pipe, with saddles/clamps for fixing of cable.
150
-
-
... More
Supplying and Laying of XLPE/PVC insulated, Armoured, Sheathed, Aluminium Power cable of the size of 4CX95 sqmm, along the cable tray/Sheet Wall/through pipe, with saddles/clamps for fixing of cable.
200
-
-
... More
Supplying and making End Termination with Brass Compression Gland and Aluminium Lugs for 3(1/2)x95 Sq.mm PVC Insulated and PVC Sheathed/XLPE Aluminium conductor cable of 1.1kV grade.
30
-
-
... More
Design, Manufacture, Supply, Installation, Testing and Commissioning of 3-Ph, 430 Volts Power Distribution Panel for D-5 New Mining Office Building. The Panel consists of mainly the following parts: a). Incomer Breaker: 250 Ampere MCCB b) 100 Amp. FSU Panel as Outgoing--- 4 Nos c). 63 Amp. FSU Panel as Ousgoing- 2 Nos The detailed technical Specifications are attached in Annexure-II.
1
-
-
... More
Supply, Installation & Commissioning of 10 KVA UPS system with IGBT-PWM with inbuilt isolation transformer techonology along with Battery Bank with following specification a Input Power Three phase 300 V - 450V sinewave,50Hz, b.Output power 230VAC, +/-1%, 1 Phase
c.Backup time (Minutes) 120 d.SMF-VRLA conforming to JISC:8702(Pt.I,II&III) Make: Luminous/Hitachi/Numeric/Microtek/UNILINE
2
-
-
... More
Supply, installation, testing & commissioning of Smoke Detector with builtin LED and mounting base complete with all connections etc. as required.
40
-
-
... More
Supply, installation, testing & commissioning of Manual Call boxes of MS construction in Surface/recess with stainlees steel chain & hammer assembly complete with glass and push button etc. as required..
10
-
-
... More
Supply, installation, testing & commissioning of Response Indicator on surface/recess MS Box having two LEDs metallic cover Smoke complete with all connections etc. as required.
20
-
-
... More
Supply, installation, testing & commissioning of Fire Alarm sounder with facility to make annoucement, mounted in M.S. Box (16 SWG) with hinged cover plated & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
20
-
-
... More
Supply, installation, testing & commissioning of talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S. (16 SWG)/ABB box with break glass in front etc. complete as required.
10
-
-
... More
Supply, installation, testing & commissioning sector panel suitable for 6 Zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other strandard facilities as per IS: 2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
6
-
-
... More
Supply, installation, testing & commissioning of Main Control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 10 Zone Panel for Fire Alarm System. 250 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required--- 2 Nos (One to act as standby). Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos talk back unit---- 1 Set. Announcement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required----1 Set Amplifier change over switch for inter changing amplifier --- 1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required --- 1 No. Gooseneck microphone with stand and ON/OFF switch --- 1No. Main ON/OFF switch, fuse indication lamps, DC and voltmeters & ammeters,, terminal blocks etc. complete as required ---- 1 Set Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 Nos 12 Volt, 60 AH each sealed maintenance free batteries --- 1 Set
1
-
-
... More
Supply and laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
100
-
-
... More
Supply and laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
100
-
-
... More
Supply and laying of cable Fire Retardant PVC insulated copper conductor cable in the existing surface/recessed steel conduit of Single pair, 2-Core, 1.5 Sqmm including connecitons and interconnections etc. as required.
300
-
-
... More
Supply and laying of cable Fire Retardant PVC insulated copper conductor cable in the existing surface/recessed steel conduit of Two pair, 2-Core, 1.5 Sqmm including connecitons and interconnections etc. as required.
300
-
-
... More
Supply and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
600
-
-
... More
TOTAL OF SCHEDULE- C
-
-
-
... More
TOTAL OF (SCH A+ SCH B+ SCHC) =
-
-
-
... More
ADD GST@18% ON "X" =
-
-
-
... More
TOTAL QUOTED PRICE INCLUDING GST
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements