Nava Raipur Atal Nagar Vikas Pradhikaran Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Nava Raipur Atal Nagar Vikas Pradhikaran Tender
Civil And Construction
Road Construction
Opening Date8 Feb 2024
Closing Date19 Feb 2024
Tender Amount₹ 11,62,31,716.28
Costs
EMD
₹ 12,62,328Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
152744Bid Award Id
ViewTender No
152744Tender Authority
Nava Raipur Atal Nagar Vikas Pradhikaran ViewPurchaser Address
-Website
http://eproc.cgstate.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Granular Sub-base as per Table:- 400-1
Construction of Granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 .
Plant mix method (with Mechanically crushed stone only) for grading-III Material
1778.18
6934905
3900
... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987)
150mm diameter
1654.47
5807189
3510
... More
Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more
112.03
4707471
42021
... More
Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 40mm nominal size graded stone aggregate)
1:3:6 (M-10)
5038.39
4640455
921.02
... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987)
100mm diameter
1178.37
3334795
2830
... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.6X0.6m depth upto 1.6m. wall thick 150mm, bottom slab thick=150mm, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and 200mm thick slab using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.
38994.64
3236555
83
... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.6X0.6m depth upto 1.3m. wall thick 150mm, bottom slab thick=150mm, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and 200mm thick slab using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.
36561.09
2851765
78
... More
Earth work in excavation for pipe trench in ordinary soil are as including dressing, watering and ramming and disposal of excavated earth all lead and , disposal earth to be leveled, neatly dressed.
Upto 1.5 m deep
201.19
2764766
13742.37
... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.8X0.6m depth upto 1.9m. wall thick 150mm, bottom slab thick=150mm, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and 200mm thick slab using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. complete as per direction of Engineer-in-Charge.
44384.33
2441138
55
... More
Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area (Construction of sub-grade with approved material/selected soil having C.B.R.8 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
312.4
2190705
7012.5
... More
Structural steel hot dip galvinized MS angle welded over a base plate including cutting, welding ,hoisting and fixing in position with 3 nos. of 12mm diameter fastnerrs etc. complete as per drawings and direction of Engineer complete etc.
101.22
2062936
20381.2
... More
Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and depth above 300 mm and upto 450mm made out of not less than 2 mm thick CRCA MS sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ameters ets as per specifications including powder coating painting with busbars, switchgears and angle frame other accessories etc complete as required as following:
4 strip al bus bar of size 50 x 5mm and 300amps (1no.)
analog type 0-500 amp ammeter of size 100x100 (NS) (1no.)
selector switch fro voltmeter (1no.)
selector switch fro ammeter (1no.)
230 volt LED type indicating lamp (3nos.)
4 pole MCCB, 250A, 35KA (for Transformer Panel) (1no.)
3 Nos 4 pole, 63A MCCB, 35kA as outgoing feeders ,2 Nos 125 A MCCB ,35 kA
268664
1880648
7
... More
Supplying and laying following sizes one number PVC insulated, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/HUME/STONE WARE/METAL/HDPE pipe required. IS : 1554 ( 1988 PART 1 ) /IS : 7098 ( 1988 ,part 1 )
3.5 x 70 sq. mm.
309.9
1859404
6000
... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.6X0.6m depth upto 1m. wall thick 150mm, bottom slab thick=150mm, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and 200mm thick slab using M-20 grade concrete . with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.
33907.61
1695380
50
... More
Filling available excavated earth in trenches, plinth sides of foundation in layers not exceeding 20cm. in depth including consolidation of each layer by ramming watering, all lead and lift in all kinds of soils
82.47
1670750
20258
... More
Providing & Supplying D.I. Specials & Fittings For all types of specials, bends, tees.. etc.
80mm to 300 mm dia
87.47
1661968
19000
... More
Providing 1st class bedding below pipes with graded sand or other granular materials passing through 5.6 mm sieve as per clause 2904.
948.45
1631327
1720
... More
Providing, laying, Jointing & field testing of DWC HDPE Pipes (with external annular corrugation and smooth internal walls) duly tested Conforming to IS 16098 (PART-II): 2013 having stiffness class of SN 8 with ring stiffness not less than 8.00KN/SQM. and impact resistance TIR valve not more than 10% including necessary jointing materials for non-pressure underground sewerage, drainage & cross drainage application. Inclusive of all taxes related to central, state and municipal, inclusive of excise duty, inspection charges, transportation charges, transit insurance, loading/unloading and stacking at site/store etc. and as per Technical Specifications and as per direction of Engineer.This is also inclusive of Jointing material i.e Pipe with online/offline coupler and elastomeric sealing ring. All the joints shall be confirmed water tight as per standards.
300/345 mm dia.
1459.53
1573376
1078
... More
Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.
90 mm outer dia and 75 mm inner dia
253.67
1522012
6000
... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.8X0.6m depth upto 2.2m. wall thick 150mm, bottom slab thick=150mm, FRP circular cover internal opening 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and 200mm thick slab using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.
47140.94
1414228
30
... More
Earth work in excavation for pipe trench in ordinary soil are as including dressing, watering and ramming and disposal of excavated earth all lead and , disposal earth to be leveled, neatly dressed. 1.5m and upto3.0m deep
268.66
1395440
5194
... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)
7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long
13668.12
1257467
92
... More
Construction of RCC drain/chamber cover, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement.with RCC M-20
5180.84
1136547
219.38
... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)
8 metre high, dia 135mm at bottom and 90mm at top, base plate size 225x225x16mm, foundation bolts 750mm long
14811.51
1066428
72
... More
Designing and providing suitable RCC foundation for 7 metre to 12 metre high GI octagonal pole including steel reinforcement (minimum 90kg per cum), form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as required.
6521.66
1039422
159.38
... More
Providing, laying, Jointing & field testing of DWC HDPE Pipes (with external annular corrugation and smooth internal walls) duly tested Conforming to IS 16098 (PART-II): 2013 having stiffness class of SN 8 with ring stiffness not less than 8.00KN/SQM. and impact resistance TIR valve not more than 10% including necessary jointing materials for non-pressure underground sewerage, drainage & cross drainage application. Inclusive of all taxes related to central, state and municipal, inclusive of excise duty, inspection charges, transportation charges, transit insurance, loading/unloading and stacking at site/store etc. and as per Technical Specifications and as per direction of Engineer.This is also inclusive of Jointing material i.e Pipe with online/offline coupler and elastomeric sealing ring. All the joints shall be confirmed water tight as per standards.
250/295 mm dia.
1094.65
984090
899
... More
Earthing with G.I. earth pipe 3.0 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.
4052.45
968536
239
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
177.82
897981
5050
... More
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.
60 watt
4526.05
887106
196
... More
Providing laying and jointing of following galvanized Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes,
specials and jointing materials all complete. Pipes and sockets conforming to IS:1239/2011 Part-II.
100 mm dia. Heavy class
1469.53
853796
581
... More
Cast insitu Cement Concrete M20 Kerb with Channel( construction of cement concrete kerb with channel with top and bottom width 115 and 165mm repectively, 250mm high in M20 grade PCC on M10 grade foundation 150mm thick , kerb channel 300mm wide, 50mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually all complete as per clause 409).
478.6
829886
1734
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:
(22.25.2)Furn like Arica, China etc (3 year old)
156.2
801774
5133
... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.8X0.6m depth upto 2.5m. wall thick 150mm, bottom slab thick=150mm, FRP circular cover internal opening 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and 200mm thick slab using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.
50117.47
751762
15
... More
Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.
40 mm
114.96
673109
5855
... More
Supplying and laying following sizes one number PVC insulated, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/HUME/STONE WARE/METAL/HDPE pipe required. IS : 1554 ( 1988 PART 1 ) /IS : 7098 ( 1988 ,part 1 )
4x10 sq.mm
118.71
614928
5180
... More
Construction of RCC valve chamber internal size 0.8m x 0.6m x 0.8m, 100mm thick PCC- M10 and RCC M20 grade 150mm thick wall, M-35 grade precast cover 200mm thick slab, on top for protection of valve coming under traffic & extended MS valve operating spindle rod as reqd etc. Including steel reinforcementon 10mm dia. 150mm c/c bothways top and bottom in precast cover, dobel reinforcement in wall and as per drawing, shuttering, labour charges, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height etc as per drawing and as per direction of Engineer complete etc.
19327.56
560499
29
... More
Providing & fixing form work i/c centering and shuttering including strutting, propping etc. and removal of form work for: 18.64.1 Foundation , footing, bases of
Foundation /footing /column base/ plinth beam of any shape and size up to plinth level
231.18
557242
2410.47
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size). (curtainn wall base)
4438.58
547276
123.3
... More
Collection chamber : Providing and constructing Brick masonry valve chamber with 15cm thick 1:3:6 proportion PCC bedding excluding excavation, Brick masonryin C.M.1:6 proportion, cement concrete grade M-15 (Nominalmix) with stone aggregate 20mm Nominal size for benching, 150mm thick precast RCC cover as directed by Engineer-in-Charge. Size Size 60cm x45cm, depth 0.9 M with cover (Note:-Wall thickness: 0.2M for depth of 0.9M and 0.35M for balance depth exceeding1.2M. 20mm plaster 1:4 inside chamber).
5460.75
529692
97
... More
Excavation in Soil (by Mechanical Means). Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead as per relevant clauses of section 300.
118.71
510461
4300
... More
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including concrete laying, cost of centering, shuttering, finishing and including Admixtures in recommended proportions as per IS9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade design mix reinforced cement concrete by using 405 kg. of cement per cum of concrete. All work upto plinth level excluding the cost of reinforcement.
M-20
6365.46
488485
76.74
... More
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M20 grade PCC on M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408).
258.67
448528
1734
... More
Providing, and fixing of MS BOLTS AND NUTS
20mm dia and above x 90mm to 120mm length fully threaded bolts and with nuts 2 Nos.
212.43
424864
2000
... More
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead as per relevant clauses of section-200 in i),B Cement concrete Grade M-15 and M-20
434.86
393114
904
... More
Providing, and fixing of MS BOLTS AND NUTS
16 mm dia x 65 to 90 mm length fully threaded bolts and nuts with 2 Nos.
146.2
365508
2500
... More
Supplying and erecting chain link mesh fencing for electric sub-station switch yard of 2.5 m approx. height from ground level using angle iron size 50 X 50 X 6 mm erected in C.C. foundation 15 X 15 X 40 cm deep at every 2 metre fitted with flat iron support of size 25 X 6 mm on top, bottom and mid way and chain link mesh 50 x 50 mm aparture and 4 mm dia G.I. hard wire securing and screwing with 2mm dia G.I. wire, G.I. staples, G.I.U-nails or steel pins to the angle iron at every distance of 30 cms, by iron studs complete duly painted with one coats of red oxide and two coats of approved colour paint.
638.55
319272
500
... More
Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications as per section 1600.
85838.77
293568
3.42
... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)
6 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 600mm long
9203.3
285302
31
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retroreflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of retro reflective type sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing and painting of all components of the signs and supports as per clause 7.2 of IRC:67-2012.Made of Micro Prismatice Grade sheeting of Type XI. Vii) 75cm Octogan (aluminum sheeting of thicknees 2mm)
9459.47
283784
30
... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987)
300mm diameter
3633.84
279805
77
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from streaks and holes.)
883.47
276171
312.6
... More
Providing, Laying and jointing non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints. [Conforming to IS ; 458-1988, ISI marked laying as per IS 783:1985)
1000 mm dia.
8339.83
271044
32.5
... More
Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications section 1600 and 2200
86224.9
269021
3.12
... More
Extra for every additional lift of 1.5m or part there of
Ordinary Soft & Hard Rock
119.96
253298
2111.5
... More
Design, Fabrication, Supply, Erection, Testing and commisioning of Powder coated, Weather Proof Double door type Feeder pillar fabricated out of 14 guage CRCA sheet steel in cubical, free standing, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Feeder pillar shall be treated with all anti-corrosive process before painting as per specification. Feeder Pillar shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)
INCOMER
1No. 4 Pole 63A TPN MCCB (35 KA) 1No. 63A FP Contactor, AOM switch & Timers for 24 Hrs. setting
Metering & Indication
1 set of phase indicating lamps
BUS-BAR
1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves
OUTGOINGS
6 Nos. 32A TP&N MCB
35317.34
247221
7
... More
Extra for every additional lift of 1.5m or part there of
All Kind of soil
67.48
232557
3446.4
... More
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete.
Sluice Valve/Scour valve
100 mm dia. PN-1.6
11607.53
220543
19
... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)
5 metre high, dia 130mm at bottom and 75mm at top, base plate size 200x200x12mm, foundation bolts 600mm long
8382.32
209557
25
... More
Providing and laying in position including testing following sizes of flanged cast iron standard specials class medium or heavy which does not appear in above items of the schedule.
80mm to 300mm dia (Heavy Class)
78.72
188939
2400
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
(3.1.3)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).
3711.31
185565
50
... More
Providing & fixing following ductile iron single chamber triple function temper proof air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991
80 mm dia PN-1.6
8558.51
179728
21
... More
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.
With Batching Plant, Transit Mixer and Concrete Pump
RCC Grade M30
7570.08
172370
22.77
... More
Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand:
22.25.3)Hibiscus (Flower)/ Rose
33.11
169976
5133
... More
Providing and laying Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications section 1500, 1700 and 2200 (Newly laid concrete shall be covered by gunny bags).
Height upto 5m
With Batching Plant, Transit Mixer and Concrete Pump
R.C.C. Grade M-30
8047.42
167466
20.81
... More
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
Cement Mortar 1:6 (1 cement : 6 coarse sand)
4077.44
163097
40
... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.
M-25 Grade
5370.78
161123
30
... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.
M-20 Grade
5287.06
158611
30
... More
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete.
Sluice Valve/Scour valve
80 mm dia. PN-1.6
8638.48
146854
17
... More
Provision of public stand posts for urban poor
Providing and constructing two stand post as per type design with excavation 15cm thick PCC1:3:6 bedding 20mm thick PCC1:2:4 convert for plat form of 1.5M dia. with side curb and bucket rest, 80mm dia, heavy duty GI pipe central post duly filled therein with C.C.1:2:4, 2.2M long, 20mm dia medium G.I.pipe from point of tapping to stand post additional 20mm dia G.I. pipe 5.8m long fixed upto 15mm dia self closing water taps, one brass ferule etc. complete together with all labour and material charges as per drawing and as directed by Engineer-in-charge when good foundation in available. Rate includes draining arrangement by excavatin go pen gutters complete. (Drawing No.- 22)
5583.21
145163
26
... More
Provision for Ductile iron/M.S pipe inter connection of old to new pipe line with excavation of trench as per requirement of any diameter & type of pipe line in muddy area i/c dewetering the trench laying & jointing of pipe and specials, back filling the trench i/c testing of joints cost of labour & specials such as D-Joints couplers, flanged sockets,Tee solvent cement including all lead and lift upto 1.5m depth and pipe dia. upto 300mm, complete job work as per approved specification and as directed by Engineer in charge. 100mm diameter
6167.28
141847
23
... More
Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications
87598.21
141033
1.61
... More
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.
45 watt
3410.16
139816
41
... More
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete.
Sluice Valve/Scour valve
300 mm dia. PN-1.6
68871.7
137743
2
... More
Providing & fixing of following Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete.
Sluice Valve/Scour valve
150 mm dia. PN-1.6
15228.88
121831
8
... More
Providing, laying, Jointing & field testing of DWC HDPE Pipes (with external annular corrugation and smooth internal walls) duly tested Conforming to IS 16098 (PART-II): 2013 having stiffness class of SN 8 with ring stiffness not less than 8.00KN/SQM. and impact resistance TIR valve not more than 10% including necessary jointing materials for non-pressure underground sewerage, drainage & cross drainage application. Inclusive of all taxes related to central, state and municipal, inclusive of excise duty, inspection charges, transportation charges, transit insurance, loading/unloading and stacking at site/store etc. and as per Technical Specifications and as per direction of Engineer.This is also inclusive of Jointing material i.e Pipe with online/offline coupler and elastomeric sealing ring. All the joints shall be confirmed water tight as per standards.
170/200 mm dia.
512.34
118349
231
... More
Collection chamber : Providing and constructing Brick masonry valve chamber with 15cm thick 1:3:6 proportion PCC bedding excluding excavation, Brick masonryin C.M.1:6 proportion, cement concrete grade M-15 (Nominalmix) with stone aggregate 20mm Nominal size for benching, 150mm thick precast RCC cover as directed by Engineer-in-Charge. Size Size 60cm x45cm, depth 0.9 M with cover (Note:-Wall thickness: 0.2M for depth of 0.9M and 0.35M for balance depth exceeding1.2M. 20mm plaster 1:4 inside chamber).
Add 30 cm or part there off, Unit/Each = 30 cm depth
803.49
100436
125
... More
Painting on Concrete Surfaces Two coats on new surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)
77.48
98069
1265.82
... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.
7 metre high
1062.16
97718
92
... More
Supply and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ concealed, steel/ PVC conduit as required.
3 x 1.5 sq.mm. (from Pole Junction box to Light fitting)
46.24
97093
2100
... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification sections 1500, 1600 and 1700 (Newly laid concrete shall be covered by gunny bags).
RCC Grade M 30
For Solid Slab Super Structure
Using Batching Plant, Transit Mixer and Concrete Pump
Height upto 5m
8787.19
94286
10.73
... More
Provision for Jointing of TW to Rising Main with cost of Material/ specials such as GI Union / CI Flange,GI Reducer UPVC MTA FTA etc. asper
3430.15
89183
26
... More
Providing and fixing wrought steel Cap Plug with threadingin G.I. Pipe line testing etc. complete confirming to IS:1879 (New & Old Work)
100 mm dia.
1053.41
86379
82
... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.
8 metre high
1154.63
83133
72
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retroreflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of retro reflective type sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing and painting of all components of the signs and supports as per clause 7.2 of IRC:67-2012.Made of Micro Prismatice Grade sheeting of Type XI. vi) 60cm x 60cm square ( aluminum sheetig of thickness of 1.5mm)
7332.65
73326
10
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
586.06
72261
123.3
... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer.
100mm diameter
3635.09
69066
19
... More
Supplying and laying following sizes one number PVC insulated, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/HUME/STONE WARE/METAL/HDPE pipe required. IS : 1554 ( 1988 PART 1 ) /IS : 7098 ( 1988 ,part 1 )
3.5 x 120 sq. mm.
476.1
66653
140
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retroreflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of retro reflective type sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing and painting of all components of the signs and supports as per clause 7.2 of IRC:67-2012.Made of Micro Prismatice Grade sheeting of Type XI. iii) 60cm circular( aluminium sheeting of thickness 1.5mm)
6315.48
63154
10
... More
Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)
Ordinary Soil
Upto 3 m depth
182.44
56927
312.03
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:
In Cement Mortar 1:4 (1 cement : 4 fine sand)
149.95
54432
363
... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer.
80mm diameter
3166.49
53830
17
... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer.
150mm diameter
6156.78
49254
8
... More
Providing & Supplying of Clamp Saddle (DI Strap Saddle) for House Service connections from metal pipe water distribution mains shall be of fastened strap type with threaded outlet for service connection. Clamp Saddle shall be suitable for nominal size of distribution mains pipe line. The strap shall be elastomer coated (insulated) type for firm grip on pipe as well as to protect the coating on the pipe and to insulate the unidentical metals. The saddle shall be single strap type up to pipe sizes of NB 600 and service outlet 15mm, 20mm & 25mm. Fasteners shall be of threaded nut bolt washer type. The sealing between the saddle and mains shall be obtained by using a profiled elastomer seal matching to the curvature of the pipe. The seal shall be of elastomer type, suitable for all potable water application. The material of construction of the body, straps, fasteners etc. shall be of non-corrosive material such as engineering plastic (PE/PP) or stainless steel or a combination of both. and shallbe inclusive of all cost such as testing, inspection charges, transportation up to site, transit insurance, loading,
unloading, stacking etc. complete.
150 NB x 15mm, 20mm, 25mm
1651.97
42951
26
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing).
(vii)90 cm high octagon
10686.58
42746
4
... More
Providing, fixing and testing following double flanged cast iron(horizontal cast) pipe per IS :7181of One Meter length.
80mm diameter
2125.57
42511
20
... More
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications as per section 2504
Stone/Boulder
3015.28
36786
12.2
... More
Compacting Original Ground supporting /sub-grade Loosening of the ground upto a level of 500 mm below the subgrade level , watered, graded and compacted in layers to meet requirement of table 300-2 for sub grade construction.
34.99
33200
948.89
... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.
6 metre high
1005.93
31183
31
... More
Construction of precast RCC railing of M30 Grade,
aggregate size not exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications as per relevant clauses of section 1500, 1600, 1700 and 2703 (vide drawing No. SD/202, SD/304)
2341.75
30794
13.15
... More
Inbuilt of drain cover slab in providing perforated holes using PVC pipe 50 mm dia. including cost of allmaterials and labour involved with all leads and lifts etc. as per drawing and direction of Engineer in Charge.
47.05
30611
650.65
... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer.
300mm diameter
15290.11
30580
2
... More
Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.
Single Over Hang 0.75 metre Long
1203.36
30084
25
... More
Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core/ lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as required.
4X10 sq.mm
22.49
28700
1276
... More
Sand Filling in Foundation Trenches as per Drawing & Technical Specifications.
1542.01
26769
17.36
... More
Providing and laying M-30 grade Reinforced cementconcrete approach slab including reinforcement and formwork complete as per drawing and Technical specification and as per relevant sections 1500, 1600, 1700 and 2704
11829.96
24488
2.07
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing).
(iii)60 cm Circular
5573.22
22292
4
... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.
5 metre high
872.22
21805
25
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing).
(v)60 cm x 45 cm rectangular
5407.02
21628
4
... More
Earth work in Excavation for pipe trench in Hard Soil areas including dressing, watering and ramming and disposal of Excavated earth all lead and lift , disposal earth to be leveled, neatly dressed.
1.5m and upto 3.0m deep
386.13
19306
50
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
15 mm nominal bore
354.89
18454
52
... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as required.
4x10 sq.mm
122.46
17634
144
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
110 mm dia pipe. (for Sewerage)
333.64
16682
50
... More
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification including trimming of slopes to proper profile and preparation of bed and as per clause 2504.
2597.92
16626
6.4
... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing).
(ii)60 cm equilateral triangle
3908.75
15635
4
... More
Supplying and erecting MS gate of approx. size 3.0 m (W) x 2.0 m (H) in two laps for electric sub-station switch yard fencing frame made of angle iron size 50 X 50 X 6 mm on top bottom and sides fitted with flat iron support of size 25 X 6 mm on mid way horizontaly and square bar of size 8 mm at every100mm vertically including 3 sets of heavy duty MS hinges and aldrop complete duly painted with one coats of red oxide and two coats of approved colour paint.
1297.08
15565
12
... More
Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete:
20 mm dia. nominal bore
231.18
15026
65
... More
Earth work in Excavation for pipe trench in Hard Soil areas including dressing, watering and ramming and disposal of Excavated earth all lead and lift , disposal earth to be leveled, neatly dressed.
Upto 1.5 m deep
266.16
13308
50
... More
Supplying and laying following sizes one number PVC insulated, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/HUME/STONE WARE/METAL/HDPE pipe required. IS : 1554 ( 1988 PART 1 ) /IS : 7098 ( 1988 ,part 1 )
4x16 sq.mm
128.71
12870
100
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20 mm nominal bore
492.34
12800
26
... More
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a all lead and lift upto
81.22
12742
156.88
... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as required.
3.5 x 70 sq. mm.
248.67
11936
48
... More
Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff all lift and lead (at least 5m away from the excavated area), including dressing and leveling of pits.
(1.1.1) In all types of soils.
231.18
11558
50
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2135.57
10677
5
... More
Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications section 2706 and 2200
401.12
10028
25
... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as required.
3.5 x 120 sq. mm.
353.64
9901
28
... More
Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core/ lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as required.
4X16 sq.mm
23.74
9876
416
... More
Providing and fixing in position precast circular 560mm internal dia SFRC/R.C.C. manhole cover or cover and frame of approved quality:
Cover and frame H D - 20
1795.68
8978
5
... More
Excavation for drain (Earth work in excavation for as per drawing and technical specification, including setting out,drain/chamber construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)
174.94
8747
50
... More
Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
Foundation /footing /column base/ plinth beam of any shape and size up to plinth level
173.69
8684
50
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:
20 mm dia.
122.46
6367
52
... More
Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer.
54.36
6088
112
... More
Making connection of drain or sewer line with existing service lines manhole including breaking into and making good the walls, floors etc. with cement concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size plastered with Cement Mortar 1:3 (1Cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels etc. complete.
For 350 to 450 mm dia pipes
583.56
5252
9
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
213.68
4273
20
... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as required.
4x16sq.mm
126.21
4038
32
... More
Making connection of drain or sewer line with existing service lines manhole including breaking into and making good the walls, floors etc. with cement concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size plastered with Cement Mortar 1:3 (1Cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels etc. complete
For 250 to 300 mm dia pipes
434.85
3913
9
... More
Providing, and fixing of RUBBER INSERTION SHEET (Gasket for flange joint)
3 Ply R.I. Sheet
87.47
3061
35
... More
Painting on concrete surface of R.C.C. Railing (Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litrefor 2 Sq.m. )
188.67
2977
15.78
... More
Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.
Single Over Hang 1.00 metre Long
12.49
2436
195
... More
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto all lift and lead (at least 5m away from the dressed area).
9
1215
135
... More
Total Amount
-
116231716
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements