Nava Raipur Atal Nagar Vikas Pradhikaran Tender

BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.

Nava Raipur Atal Nagar Vikas Pradhikaran Tender

Works
Civil And Construction
Road Construction
Opening Date23 Feb 2024
Closing Date29 Feb 2024
Tender Amount₹ 10,98,68,438.63 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per clause 406.)

5400

7972810

1476.45

... More
Granular Sub-base as per Table:- 400-1 Construction of Granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 . Plant mix method (with Mechanically crushed stone only) For Lower Sub-base with Grading-III Material

5400

7911652

1465.12

... More
Construction of RCC Drain/Cover/Chamber Construction of RCC drain/chamber cover, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement. with RCC M-20.

1250

5335902

4268.72

... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. M-20 Grade

1047.47

4563045

4356.24

... More
Providing & Laying precast interlocking concrete block of minimum compressive strength of 300kg/sq.cm and approved size, shape/ pattern over coarse sand bed of thickness upto 40 mm and joints thick filled with fine sand including leveling with surface vibrator, temping and sweeping etc.complete as per IRC-SP-63-2004.A)60mm thick Plain precast interlock concrete block- 60mm thick Polymer coated coloured precast interlock concrete blocks

6000

3996907

666.15

... More
Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area (Construction of sub-grade with approved material/selected soil having C.B.R.8 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)

15000

3861000

257.4

... More
Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)

15000

3444012

229.6

... More
Making connection of drain or sewer line with existing service lines manhole including breaking into and making good the walls, floors etc. with cement concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size plastered with Cement Mortar 1:3 (1Cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels etc. complete. 600mm diameter pipe

40

2868465

71711.64

... More
Horizontal drilling: Horizontal directional drilling along roads for laying XLPE HT/ LT, UG cable, for communication cable along with suitable HDPE Duct at various locations as pointed out by departmental officers, includes Survey of site information collection regarding underground utilities, sensing of utilities by sensing equipment, pit making, pilot drilling, pre-reaming pulling HDPE duct of suitable size in single roll, pulling HT/ LT UG cable through installed HDPE duct, providing barricades and necessary signal lights, closing of pits with excavated earth including cost of HDPE pipe, consolidating pit are, including road restoration/supervision departments, cost of all materials, labour, conveyance, hire charges etc. complete preparation of pit by excavated soil/ hard morum & refilling compacting surface as it is position / horizontal drilling across road for cable laying propose with disturbing present installation as per instruction, Guide line Detail technical specifications as per direction of Engineer in charge

870

2239380

2574

... More
Providing, laying, Jointing & field testing of DWC HDPE Pipes (with external annular corrugation and smooth internal walls) duly tested Conforming to IS 16098 (PART-II): 2013 having stiffness class of SN 8 with ring stiffness not less than 8.00KN/SQM. and impact resistance TIR valve not more than 10% including necessary jointing materials for non-pressure underground sewerage, drainage & cross drainage application. Inclusive of all taxes related to central, state and municipal, inclusive of excise duty, inspection charges, transportation charges, transit insurance, loading/unloading and stacking at site/store etc. and as per Technical Specifications and as per direction of Engineer.This is also inclusive of Jointing material i.e Pipe with online/offline coupler and elastomeric sealing ring. All the joints shall be confirmed water tight as per standards. 300/345 mm dia.

684

1611315

2355.72

... More
Prime Coat ( Providing and applying primer coat with oil based bitumen emulsoion (SS-I, grade confirming to IS:8887) on prepared surface of granular Base including clearing of road surface and spraying primer using mechanical means as per cluse 502. (i) on WBM/WMM surface @0.85 Kg/sqm.

24390

1607164

65.89

... More
Excavation in Soil (by Mechanical Means). Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead as per relevant clauses of section 300.

15000

1467180

97.81

... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 4mm thick anchor plate, 4 nos 24mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 9 metre high, dia 155mm at bottom and 90mm at top, base plate size 260x260x16mm, foundation bolts 750mm long.

98

1409987

14387.63

... More
Providing, laying, Jointing & field testing of DWC HDPE Pipes (with external annular corrugation and smooth internal walls) duly tested Conforming to IS 16098 (PART-II): 2013 having stiffness class of SN 8 with ring stiffness not less than 8.00KN/SQM. and impact resistance TIR valve not more than 10% including necessary jointing materials for non-pressure underground sewerage, drainage & cross drainage application. Inclusive of all taxes related to central, state and municipal, inclusive of excise duty, inspection charges, transportation charges, transit insurance, loading/unloading and stacking at site/store etc. and as per Technical Specifications and as per direction of Engineer.This is also inclusive of Jointing material i.e Pipe with online/offline coupler and elastomeric sealing ring. All the joints shall be confirmed water tight as per standards. 250/295 mm dia.

1143

1371010

1199.48

... More
Construction of RCC Drain/Cover/Chamber Excavation for drain (Earth work in excavation for drain/chamber as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.)

8140.83

1173451

144.14

... More
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

6314.81

903740

143.11

... More
Providing, laying, Jointing & field testing of DWC HDPE Pipes (with external annular corrugation and smooth internal walls) duly tested Conforming to IS 16098 (PART-II): 2013 having stiffness class of SN 8 with ring stiffness not less than 8.00KN/SQM. and impact resistance TIR valve not more than 10% including necessary jointing materials for non-pressure underground sewerage, drainage & cross drainage application. Inclusive of all taxes related to central, state and municipal, inclusive of excise duty, inspection charges, transportation charges, transit insurance, loading/unloading and stacking at site/store etc. and as per Technical Specifications and as per direction of Engineer.This is also inclusive of Jointing material i.e Pipe with online/offline coupler and elastomeric sealing ring. All the joints shall be confirmed water tight as per standards. 400/480 mm mm dia.

371

884287

2383.52

... More
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M20 grade PCC on M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408).

4000

852508

213.13

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 1.0X0.8m depth upto 3.1m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

17

818146

48126.25

... More
Structural steel hot dip galvinized MS angle welded over a base plate including cutting, welding ,hoisting and fixing in position with 3 nos. of 12mm diameter fastnerrs etc. complete as per drawings and direction of Engineer complete etc.

9797.45

817083

83.4

... More
Design, Fabrication, Supply, Erection, Testing and commisioning of Powder coated, Weather Proof Double door type Feeder pillar fabricated out of 14 guage CRCA sheet steel in cubical, free standing, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Feeder pillar shall be treated with all anti-corrosive process before painting as per specification. Feeder Pillar shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated) INCOMER 1No. 4 Pole 100A TPN MCCB (35 KA) 1No. 100A FP Contactor, AOM switch & Timers for 24 Hrs. setting Metering & Indication 1 set of phase indicating lamps BUS-BAR 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 24 Nos. 32A SP MCB GPRS MODULE FOR AUTOMATION

3

772200

257400

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.8X0.6m depth upto 1.9m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. complete as per direction of Engineer-in-Charge.

20

681857

34092.86

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.8X0.6m depth upto 2.2m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

18

648712

36039.56

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.6X0.6m depth upto 1.6m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

21

635351

30254.82

... More
Cast insitu Cement Concrete M20 Kerb with Channel( construction of cement concrete kerb with channel with top and bottom width 115 and 165mm repectively, 250mm high in M20 grade PCC on M10 grade foundation 150mm thick , kerb channel 300mm wide, 50mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually all complete as per clause 409).

1500

591505

394.34

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.8X0.6m depth upto 2.5m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

15

572512

38167.47

... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-1997. The finished surface to be level, uniform and free from streaks and holes.)

776.43

565186

727.93

... More
Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff all lead and lift upto 1.5m , including dressing and leveling of pits. In all types of soils.

2956.97

563231

190.48

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 1.0 X0.8m depth upto 2.8m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

12

546461

45538.48

... More
Providing&layingmechanicallymixedcementconcrete20mmmaximumsizegradedcrushedstoneexcludingcostofcentring&shuttering. In Plinth & foundation M-15

116.25

482477

4150.32

... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987) 150mm diameter

319.51

446079

1396.14

... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.

915.24

441954

482.88

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.6X0.6m depth upto 1.3m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

15

428024

28534.95

... More
Tack Coat Providing and applying tack coat with bitumen emulsion(RS-1, grade confirming to IS:8887) using emulsion pressuredistributor on the prepared bituminous/granular surface cleaned withmechanical broom and as per clause 503. (ii) Granular surface treated with prime @ 0.30 kg /Sqm

24390

426903

17.5

... More
Tack Coat Providing and applying tack coat with bitumen emulsion(RS-1, grade confirming to IS:8887) using emulsion pressuredistributor on the prepared bituminous/granular surface cleaned withmechanical broom and as per clause 503. (i)Bituminous Surface@0.25kg/Sqm

24390

376679

15.44

... More
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.. Not More than 70 Watt

98

365462

3729.21

... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987) 200mm diameter

193.2

363822

1883.14

... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987) 300mm diameter

111

342056

3081.59

... More
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including concrete laying, cost of centering, shuttering, finishing and including Admixtures in recommended proportions as per IS9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade design mix reinforced cement concrete by using 405 kg. of cement per cum of concrete. All work upto plinth level excluding the cost of reinforcement. M-20

65

340910

5244.78

... More
Earthing with G.I. earth pipe 3.0 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016).

100

333899

3338.99

... More
Providing 1 st class bedding below pipes with graded sand or other granular materials passing through 5.6 mm sieve as per clause 2904.

414.25

323722

781.47

... More
Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centring and shuttering (with 40mm nominal size graded stone aggregate) In foundation and plinth M-10

86.03

289365

3363.7

... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1) 4x16 sq.mm

2646

280605

106.05

... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1) 3.5 x 70 sq. mm.

1025

261724

255.34

... More
Painting on Concrete Surfaces Two coats on new surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces)

4097.6

261571

63.84

... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing). 90 cm high octagon

27

237738

8805.14

... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (classK-7) Conforming to IS 8329/2000 with suitable Rubber Gasket (Pushon) joints as per IS:5382/85 including testing of joint (laying Conforming to IS 12288 : 1987) 100mm diameter

212

221985

1047.1

... More
Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification.

40.85

219506

5373.48

... More
Providing & Supplying D.I. Specials & Fittings For all types of specials, bends, tees.. etc. 80mm to 300 mm dia

3000

216216

72.07

... More
Supplying and laying ISI marked double wall HDPE pipe (IS14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as required. 40 mm Outer dia.

2145

203181

94.72

... More
Providing, fixing, installation, testing and commissioning of Precast RCC M-40 grade Rectangular chambers with internal size 0.6X0.6m depth upto 1m. wall thick 125mm, bottom slab thick=125, FRP circular cover internal opening size 530mm dia. (Designed for 20tone loading capacity (heavy duty) etc.). 100mm thick bottom PCC 1:3:6, fixing of FRP frame and cover using M-20 grade concrete. with CM1:1 around pipe entering and leaving the chamber, providing and fixing of safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12mm dia. steel bar of approved make at every 0.30m height, including steel reinforcement 10mm dia. bar vertical and horizontal both the direction 150mm c/c, hydro testing of chamber, loading, unloading, conveyance & cost of labour, earth work in excavation, backfilling, dewatering etc. as per drawing and complete as per direction of Engineer-in-Charge.

7

186070

26581.43

... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to all lifts and lead including removal and disposal of top organic soil not exceeding 150 mm in thickness if required and as per relevant clauses of section-200. In area of light jungle

4.14

173528

41884.13

... More
Providing, Laying and jointing of following UPVC pipes with solvent cement joint for 4, 6, 8 and 10 kg/sq. cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect (Conforming to IS 4985 : 2000 & IS 7634 (PT-3) 160mm diameter (6 Kg/sq.cm)

350

164324

469.5

... More
Providing and fixing formwork i/c centering shuttering, strutting, staging, propping, bracing etc. complete and i/c removal of formwork. Foundation /footing /column base/ plinth beam of any shape and size up to plinth level

1147.89

164279

143.11

... More
Providing and laying in position sizes of flanged cast iron standard specials class medium or heavy which does not appear in above items of the schedule. 80mm to 300mm dia (Heavy Class)

2150

159382

74.13

... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

2000

140025

70.01

... More
Filling available excavated earth in trenches, plinth sides of foundation in layers not exceeding 20cm. in depth including consolidation of each layer by ramming watering, all lead and lift in all kinds of soils

2153.99

130847

60.75

... More
Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. single Over Hang 1.50 metre Long

98

124410

1269.5

... More
Earth work in excavation for pipe trench in ordinary soil are as including dressing, watering and ramming and disposal of excavated earth all lead and lift upto 1.5m, disposal earth to be leveled, neatly dressed.

826.24

122500

148.26

... More
Construction of RCC valve chamber internal size 1.2m x 1.2m x 1.5m, 100mm thick PCC- M10 and RCC M20 grade 150mm thick wall, precast cover 125mm thick slab on top for protection of valve coming under traffic & extended MS valve operating spindle rod as reqd etc. Including steel reinforcementon 10mm dia. 150mm c/c bothways wall & precast cover, shuttering, labour charges etc as per drawing and as per direction of Engineer complete etc.

4

115372

28843.21

... More
Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 90 mm

551

115163

209.01

... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer. 200mm diameter

16

114013

7125.86

... More
Design,Fabrication,supply,installation,testing and commissioning of pedestal mounted Block Main Power Board, made out of 2 mm thick CRCA sheet steel, cubicle type,FRLSee standing,dust/vermin/ weather proof with busbars, switchgears,earth bus etc including powder coated painting along with accessories,hardwares etc. required for completeness and as per attached specification, direction of Engineer, CGPWD standards and Electrical Inspectorate standards. The panel box shall house : 1 No 4 pole 63A isolator as Incomer ; 100A four pole Al busbrs 4 Nos 32 TP MCB C series and 4 nos 32 DP MCB 10kA as outgoing feeders:8 Nos lockable compartments for housing kWh meters Interconnection by Copper insulated leads(DOUBLE DOOR TYPE).The panel shall be completed with all necssary civil work , PAD L0CK ,angle frame as per direction of Engineer

2

107078

53539.2

... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 9 metre high

98

99387

1014.16

... More
Earth work in excavation for pipe trench in ordinary soil are as including dressing, watering and ramming and disposal of excavated earth all lead and lift above1.5m to 3.0m, disposal earth to be leveled, neatly dressed.

490

96864

197.68

... More
Providing & fixing of Cast iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. (Steel Spindle) Sluice Valve/Scour valve 200 mm dia. PN-1.6

7

93145

13306.55

... More
Providing, Laying and jointing of following UPVC pipes with solvent cement joint for 4, 6, 8 and 10 kg/sq. cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect (Conforming to IS 4985 : 2000 & IS 7634 (PT-3) 200mm diameter (6 Kg/sq.cm)

121

90072

744.4

... More
Extra for every additional lift of 1.5m or part there of Ordinary Soft & Hard Rock

1000

88545

88.55

... More
Construction of Embankment/ Median Fill with Material Deposited from Roadway Cutting (Construction of embankment with approved materials having C.B.R. 5 or as specified in the contract deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)

1052.23

86670

82.37

... More
Provision for Ductile iron/M.S pipe inter connection of old to new pipe line with excavation of trench as per requirement of any diameter & type of pipe line in muddy area i/c dewetering the trench laying & jointing of pipe and specials, back filling the trench i/c testing of joints cost of labour & specials such as D-Joints couplers, flanged sockets,Tee solvent cement including all lead and lift and pipe dia. upto 300mm, complete job work as per approved specification and as directed by Engineer in charge.

17

86385

5081.49

... More
Detailed survey of existing road including chaining, leveling, with cross section at 25.0 m intervals and closing survey each day's work, supply and fixing of bench marks pillars, painting, taking trial pits and submission of road cross sections, L-sections, quantity statements in computerized prints in five copies in proper files and all type of compliance required by the Engineer-in-charge.

5.75

83877

14594.58

... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer. 100mm diameter

28

83862

2995.11

... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer. 150mm diameter

16

81165

5072.84

... More
Providing & fixing of Cast iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. (Steel Spindle) Sluice Valve/Scour valve 100 mm dia. PN-1.6

13

64702

4977.09

... More
Compacting Original Ground Compacting Original Ground supporting embankment Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.

2051.33

59137

28.83

... More
Supply and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ concealed, steel/ PVC conduit as required. 3 x 1.5 sq.mm. (from Pole Junction box to Light fitting)

1540

58666

38.1

... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer. 80mm diameter

22

57398

2609.01

... More
Providing, Laying and jointing of following UPVC pipes with solvent cement joint for 4, 6, 8 and 10 kg/sq. cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect (Conforming to IS 4985 : 2000 & IS 7634 (PT-3) 110mm diameter (6 Kg/sq.cm)

250

55341

221.36

... More
Earth work in excavation for pipe trench in all kinds of rocks in areas including dressing, stacking of useful material and disposal of unserviceable all lead and lift, disposal earth to be leveled, neatly dressed. Soft rock with or without blasting or bituminous pavement/cement concrete road.

160

55021

343.89

... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing). 90 cm equilateral triangle

10

53230

5323.03

... More
Providing & fixing of Cast iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. (Steel Spindle) Sluice Valve/Scour valve 150 mm dia. PN-1.6

7

53095

7585.06

... More
Providing, laying, jointing, testing and commissioning of D.I Dismantling joint with M.S. Nut stud & washers coated for rust prevention & internal rubber rings etc. complete assembly set as per type design inclusive of all taxes & duties, insurance, loading/ unloading & stacking FOR at site all complete as per technical Specifications and as per direction of Engineer. 300mm diameter

4

50392

12598.19

... More
Direction and Place Identification signs upto 0.9 sqmt size board. (Providing and erecting direction and place identification retro-reflectrorized sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area not exceeding 0.9 sqmt supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing).

4

49931

12482.87

... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing). 60 cm equilateral triangle

15

48308

3220.59

... More
Providing & fixing of Cast iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. (Steel Spindle) Sluice Valve/Scour valve 300 mm dia. PN-1.6

2

47721

23860.98

... More
Providing & fixing of Cast iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete. (Steel Spindle) Sluice Valve/Scour valve 80 mm dia. PN-1.6

10

36880

3688.03

... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing). 60 cm x 45 cm rectangular

8

35640

4455.08

... More
Providing & fixing cast iron double air valves, flanged without in-built isolating valve as per IS:14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991 80 mm dia PN-1.6

11

35086

3189.7

... More
Earth work in excavation for pipe trench in all kinds of rocks in areas including dressing, stacking of useful material and disposal of unserviceable all lead and lift, disposal earth to be leveled, neatly dressed. Hard rock requiring blasting.

80

33770

422.14

... More
Design, Fabrication, Supply, Erection, Testing and commisioning of Powder coated, Weather Proof Double door type Feeder pillar fabricated out of 14 guage CRCA sheet steel in cubical, free standing, dust and vermin proof, with reinforcement of suitable size angle iron, channel, T -iron or flats as required. Feeder pillar shall be treated with all anti-corrosive process before painting as per specification. Feeder Pillar shall be suitable for 415V, 3-Phase, Four wire, 50 Hz supply complete with earth bus and lifting hooks as required in case of large panels.Approval shall be taken for each panel before fabrication. (All hardwares like nuts and bolts used shall be Galvanized and Zinc passivated)-

2

32947

16473.6

... More
Retro- reflectrorized Traffic signs (Providing and fixing of retro- reflectrorized cautionary, mandatory and informatory sign as per IRC:67-2012 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel frame of size 40 x 40 x 5 mm and mild steel angle iron post 75 mm x75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45cm x 60cm, 60 cm below ground level as per approved drawing). 60 cm Circular

7

32144

4592.02

... More
Providing, and fixing of MS BOLTS AND NUTS 20mm dia and above x 90mm to 120mm length fully threaded bolts and with nuts 2 Nos.

150

26254

175.03

... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1) 4x25 sq.mm

200

25122

125.61

... More
Providing and fixing double flanged cast iron (horizontal cast) pipe as per IS : 7181 of One Meter length. 80mm diameter

11

21847

1986.1

... More
Providing, and fixing of MS BOLTS AND NUTS 16 mm dia x 65 to 90 mm length fully threaded bolts and nuts with 2 Nos.

150

18069

120.46

... More
Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core / lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as per specification. 4X16 sq.mm

844

16510

19.56

... More
Earth work in Excavation for pipe trench in Hard Soil areas including dressing, watering and ramming and disposal of Excavated earth all lead and lift above1.5m to 3.0m, disposal earth to be leveled, neatly dressed.

54.82

15633

285.2

... More
Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete. With vibratory roller

50

14980

299.61

... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 3.5 x 70 sq. mm.

46

9424

204.89

... More
Earth work in excavation for pipe trench in all kinds of rocks in areas including dressing, stacking of useful material and disposal of unserviceable all lead and lift, disposal earth to be leveled, neatly dressed. Hard rock requiring chiselling / where blasting is prohibited.

16

7841

490.09

... More
Extra for every additional lift of 1.5m or part there of All Kind of soil

150

7413

49.42

... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 4x10 sq.mm

60

6054

100.9

... More
Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core / lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as per specification. 4X10 sq.mm

324

6004

18.53

... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 4x16sq.mm

48

4991

103.99

... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 2 X 10 sq. mm (22 mm)

50

4839

96.78

... More
Earth work in Excavation for pipe trench in Hard Soil areas including dressing, watering and ramming and disposal of Excavated earth all lead and lift upto 1.5m, disposal earth to be leveled, neatly dressed.

23.6

4640

196.65

... More
Supplying and laying following size RCC Hume pipe class NP-2 (in standard length of 2 metre) with collar in ground below road, path etc at a depth not less than 50 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as required. 300 mm dia.

5.73

3999

698.07

... More
Making connection of drain or sewer line with existing service lines manhole including breaking into and making good the walls, floors etc. with cement concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size plastered with Cement Mortar 1:3 (1Cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels etc. complete. For 350 to 450 mm dia pipes

8

3846

480.82

... More
Making connection of drain or sewer line with existing service lines manhole including breaking into and making good the walls, floors etc. with cement concrete grade M-15 (Nominal Mix) with stone aggregate 20mm nominal size plastered with Cement Mortar 1:3 (1Cement: 3 coarse sand) finished with a floating coat of neat cement and making necessary channels etc. complete. For 250 to 300 mm dia pipes

8

2866

358.3

... More
Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. Double Over Hang 1.50 metre Long

1

1924

1924.32

... More
Planting of Trees and their Maintenance for one Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia.holes, 1 m. deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year)

2

1544

772.2

... More
Providing, and fixing of RUBBER INSERTION SHEET 3 Ply R.I. Sheet

20

1441

72.07

... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 4x25sq.mm

12

1284

107.08

... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1) 4x10 sq.mm

10

978

97.81

... More
Providing and planting maxican carpet grass in mount with soil preparation (with organic manure and plants protection insecticide) and escaping works. Up to 4 month maintenance.

5.15

233

45.3

... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1) 2x10 sq mm

2

168

84.43

... More
Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and lead and earth filling in the depression /pit and as per relevant clauses of section-200 for :- Girth from 300 mm to 600 mm

-

-

202.83

... More
Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and lead and earth filling in the depression/pit and as per relevant clauses of section-200 for :- Girth beyond 600 mm to 900 mm

-

-

363.45

... More
Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and lead and earth filling in the depression/pit and as per relevant clauses of section-200 for :- Girth beyond 900 mm to 1800 mm

-

-

704.25

... More
Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and lead and earth filling in the depression/pit and as per relevant clauses of section-200 for :- Girth above 1800 mm

-

-

1333.33

... More
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.. Not More than 120 Watt

-

-

7046.58

... More
Supplying of following 230/250 volts LED Flood light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Seperate housing for driver etc complete as per specification and P.A. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 180 watt

-

-

11456.36

... More
Feeder Pillar: INCOMER- 1No.40A FP MCCB(35 KA) , Metering & Indication- 1 set of phase indicating lamps BUS-BAR- 1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves. OUTGOINGS- 2 Nos. 20A FP MCB & 4 nos 20 A SP MCB

-

-

-

... More
Supplying erection testing and commissioning of hot dipped galvanised (single dip 86 micron) 16 metre High mast pole on existing RCC foundation with all accessories and equipments, detailed as below to withstand wind pressure upto 180km/hr and minimum following specifications: a) HM shaft made of not more than 2 sections of suitable lengths with telescopic stressfit joints between sections without any circumpherencial welding, sheet thickness 4mm top and bottom sections, nominal dia 460mm on bottom and 150 mm on top, base flange 25mm thick 670mm dia, PCD of foundation bolts 650mm. b) Double drum winch for lowering & raising of lantern carriage on high mast with operatable with power tool/ manual handle attachment with a torque limiting device for safe locking of carriage. c) Raising/lowering type lantern carriage designed to carry specified nos of luminaries, control gear box, junction box. d) Top pulley assemble with weather proof cover. e) 3 Nos suitable length and size stainless steel wire ropes (minimum 6mm dia and 7/19 construction) for lowering & raising of lantern carriage. f) Suitable size and length multicore flexible copper power trailing cable (minimum 3 core 4 sqmm) g) Hinged service door in base section h) Base plate earthing terminal. i) Suitable arrangement for supply distribution with termination of suitable size underground cable in high mast. j) Lightning conductor finial made of 25mm dia 300 mm long G.I. tube having single prong. k) Anchor plate of size 840x840x6mm, tem-plates 3mm thick, GI foundation bolts 8 Nos of 30 mm dia 850 mm long (EN 8 Grade) along with nuts washers etc. (RCC fooundation and luminaries will be paid separately)

-

-

240617.52

... More
Designing and providing suitable and approved size RCC foundation for 12-30 mere high mast including seel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as required including laying and fixing HM foundation bolts with tam plates but excluding the cost of foundation bolts with tam plates etc complete as per specification

-

-

5373.48

... More
Supplying, installation, testing and commissioning of 30 Watts ,230/250 volts DECORATIVE LED post top lamp with decorative pole , the pole height shall be 3.5 m to 4.0 m with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 5 KV surge protection on pole bracket complete as required and furnishing 5 Yrs Guarantee certificate from manufacturer and approved by EIC and as per given specification .

-

-

45220.03

... More
Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m as per section 1100 and 1700. Pile diameter-1000 mm

-

-

12967.81

... More
Supplying, fitting and placing HSD (High Strength Deformed Steel) bar reinforcement in foundation complete as per drawing and technical specifications as per section 1600.

-

-

70726.31

... More
Providing steel liner 10 mm thick for curbs and 6mm thick for steining of wells including fabricating and setting out as per detailed drawing and specifications as per section 1200 and 1900.

-

-

74687.18

... More
Levelling course for Pile cap (Providing and laying of P.C.C.M- 15 levelling course 100mm thick below the pile cap.)

-

-

4652.76

... More
Cement concrete for reinforced concrete in pile cap complete as per drawing and Technical Specifications per clause 1100,1500 and 1700. Using Batching Plant, Transit Mixer and Concrete Pump RCC Grade M35

-

-

6136.42

... More
Providing and laying Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications section 1500, 1700 and 2200 (Newly laid concrete shall be covered by gunny bags). Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump R.C.C. Grade M-35

-

-

6769.62

... More
Supplying, fitting and placing HSD (High Strength Deformed Steel) bars reinforcement in sub-structure complete as per drawing and technical specifications section 1600 and 2200.

-

-

71044.46

... More
Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MORT&H specifications complete including all accessories as per drawing and Technical Specifications section 2000 and 2200.

-

-

1.03

... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification sections 1500, 1600 and 1700 (Newly laid concrete shall be covered by gunny bags). PSC Grade M-45 For solid slab/voided slab super-structure Using Batching Plant, Transit Mixer and Concrete Pump Height upto 5m

-

-

7558.29

... More
Providing external prestressing with high tensile steel wires/strands including drilling for passage of prestessing steel, all accessories for stressing and stressing operation and grouting complete as per drawing and Technical specification section 2812. For span = 25 m (4 no. of cables and 8 no anchorage)

-

-

376746.08

... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification sections 1500, 1600 and 1700 (Newly laid concrete shall be covered by gunny bags). PSC Grade M-40 For Solid Slab Super Structure Using Batching Plant, Transit Mixer and Concrete Pump Height upto 5m

-

-

7347.23

... More
Supplying, fitting and placing HSD (High Strength Deformed Steel) bar reinforcement in super-structure complete as per drawing and technical specifications

-

-

72175.99

... More
Pile Load Test on single Vertical Pile in accordance with IS:2911(Part-IV) in static load method only Lateral load test

-

-

77220

... More
Metal Railing/Crash Barrier - Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811.3)

-

-

2679.02

... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications as per relevant clause of section 2700.

-

-

12197.67

... More
Strip Seal Type - Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifi cations to be installed by the manufacturer/supplier or their authorized representative ensuring compliance to the manufacturer's instructions for installation.)

-

-

11453.27

... More
Drainage Spouts complete as per drawing and Technical specifications of section 2705

-

-

2066.41

... More
Footpath - Providing and laying precast R.C.C. footpath slab in controlled cement concrete of M-20 grade (70mm thk, including necessary reinforcement and providing and setting cement chequered tiles in C.M. 1:5 as per drawing including necessary formwork, curing and finishing complete.

-

-

1716.34

... More
Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-25 grade concrete with HYSD reinforcement conforming to IRC:21- 2000 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH-33022/1/94-DO III dated 24 June, 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified)

-

-

3243.24

... More
Furnishing and Placing Reinforced / Prestressed cement concrete in super-structure as per drawing and Technical Specification sections 1500, 1600 and 1700 (Newly laid concrete shall be covered by gunny bags). B . RCC Grade M 30 b. Using Batching Plant, Transit Mixer and Concrete Pump( i )Height upto 5m

-

-

7240.15

... More
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications 710.1.4 of I.R.C. 78 and 2200.

-

-

1983.01

... More
Total Amount

-

109868438

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.