Ministry Of Steel

Bid Number: GEM/2019/B/167265 Dated: 27-01-2019 Bid Document Bid Details Bid End Date/Time 07-02-2019 11:00:00 Bid Life Cycle (From Publish Date) 90 (Days) Bid Offer Validity (From End Date) 60 (Days) Ministry/State Name Ministry Of Steel Department Name Na Organisation Name N/a Office Name Hyderabad Total Quantity 380 Item Category High Pressure Sodium Vapour Lamps (HPSV LAMPS) , Lamp Ballast for HPSV Lamps , Lamp Ballast for HPSV Lamps Experience with Gov. Required 2 Year (s) MSE Exemption For Years Of Experience And Turnover Yes High Pressure Sodium Vapour Lamps (HPSV LAMPS) ( 175 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC High Pressure Sodium Vapour Lamp conforming to IS:9974(Pt.1)/1981 latest and IS:9974 (Pt.2)/1981 latest Yes * ISI marked No Yes, No If ISI market Yes declare CM/L No. (If No write NA) CM/L NO. * Type of lamps SON T without any coating Tubular shape SON Ovoid shape with diffusing powder coating, SON C Ovoid shape without any 1 / 8 coating, SON T without any coating Tubular shape Ignitor External * Rated wattage of lamps 150 W 150 W Rated Luminous Flux 12150 for 150 W Lamp 5200 for 70 W Lamp, 12150 for 150 W Lamp, 22500 for 250 W Lamp, 42300 for 400 W Lamp CONSTRUCTIONAL "The lamp dimensions shall comply with the requirements given in the relevant lamp data sheet in IS:9974/1981 Part II latest " Yes * Cap designation E40 Cap for 150W/250W/400W * Marking as per Cl. 5 of IS: 9974/1981 Part 1 latest Yes * "The insulation resistance between the shell of the bayonet cap and the contact shall be not less than 50 megohms." >/=50 M ohm * Rated Life of Lamps >/=5000 hours * WARRANTY Guaranteed period of replacement 1 year * REPORTS AND CERTIFICATION Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to IS specifications as appliacable. Test reports shall furnish on demand by buyer/consignee Yes * Test Report Number 150MHLAMP * Test Report Date 10.02.13 * Name of Lab bajaj electricals limited * Address of Lab mumbai * * Bold specifications are the golden parameters. Consignees/Reporting Officer and Quantity 2 / 8 S.No. Consignee/Reporti ng Officer Address Quantity Delivery Days 1 Venkateswarlu Bandi 494553,NMDC LTD, BACHELI COMPLEX,BAILADILA, BACHELI PO, CHATTISGARH 175 30 Lamp Ballast For HPSV Lamps ( 80 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Ballast for HPSV lamps (Excluding Tubular Flourescent Lamps) conforming to IS: 15882:2009 and all the ballasts specified in the standard shall meet the requirements of IS: 15885(Part-1):2011 latest and IS: 15885(Pa rt-2/Section-9): 2011 latest Yes * ISI Marked No Yes, No ISI marked if yes declare CM/L Number If 'No' write NA - * Ballast Wattage (in Watts) 400 W 400 W Operating Voltage 220 Volt -240 Volt * Supply frequency (in Hz) 50 Hz +/-5% * CONSTRUCTIONAL Ballast constructional requirements as per IS:15885 (Part 1) shall apply Yes * Winding material Copper wound * Supply current: At rated voltage, the supply current shall not differ by more than 10 percent from the value marked on the ballast when the latter is operated with a reference lamp Yes * Current wave form Yes * 3 / 8 shall be as per Cl 9 of IS:15882:2009 latst Magnetic screening: The ballast shall be effectively screened against the influence of adjacent ferro- magnetic materials as pe Cl 10 of IS:15882:2009 latest Yes * Ballast setting: Power delivered at rated voltage as per Cl. 15.1 of IS:15882:2009 latest (Not Less than 95% and not more than 105% of the reference ballast when operated at the objective lamp voltage as given in IS:9974(Part2) Yes * Short Circuit current between 92% and 106% of rated voltage as per Cl. 15.2 of IS:15882:2009 latest Yes * Open circuit voltage between 92%