Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn Of Smart Irrigation With 360 Degree Movable Sprinkler System For Roadside Lawn And Office Complex At Naya Raipur Mil Station in Raipur, Chhattisgarh, with an estimated contract value of Rs. 9,51,000. The bid opening date for this tender is 11-11-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - CG Tender

Opening Date11 Nov 2026
Closing Date25 Nov 2026
Tender Amount₹ 9,51,000 
Notes
Download

Costs

Description

Provn Of Smart Irrigation With 360 Degree Movable Sprinkler System For Roadside Lawn And Office Complex At Naya Raipur Mil Station

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Exc in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles, stay assy etc. and gettin out in hard / dense soil com lete all as s ecified and directed.

157.95

-

-

... More
Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed.

142.16

-

-

... More
Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed.

15.8

-

-

... More
Material and labour for proper road cutting by pneumatic chisel, make good after laying of pipe line with usin PCC as specified and directed by Engineer in charge

50

-

-

... More
S & F Repair 25 MM bore gate/ globe valve cast copper alloys screwed down high pressure with ctrutch or butterfly handle screwed both ends for iron pipe or for union and fixed.

35

-

-

... More
Ditto all as per item No 08 herein before but 50 MM bore

6

-

-

... More
supply and fix sluice valve PN 1.6 80 mm bore, with bypass arrangement complete all as specified and directed.

6

-

-

... More
Supply, installation, testing and commissioning of factory-built floor-mounted outdoor IP-55, powder-coated CRCA sheet steel automatic irrigation control panel, minimum size 1200 (H)x 1050 (W) x 350 mm(D), complete with canopy, base frame, locking arrangement, gland plate and ventilation for VFD, comprising 40A 4P MCCB incomer, 32A 4P MCCB outgoing, 2 Nos. 40A 4P automaüc transfer switches, PLC with HMI touchscreen, VFD suitable for 7.5 HP, 4 15V , 3-phase pump, DIGITAL ammeter / voltmeter with selector switches and CT, pressure transmitter, tank level transmitter and sensors, timer-based irrigation control, PID pressure control, overload, over / under-voltage, phase failure/ sequence and other necessary protections, emergency stop, indications, push buttons, relays, terminal blocks, internal wiring, glands, lugs, earthing and ALL accessories. PLC shall automatically control the irrigation pump through the VFD to maintain the preset pipeline pressure using feedback from the pressure transmitter and tank level management . The HMI shall display pump status pressure , tank level , operating parameter alarms and faults and shall permit adjustment of operating parameter and irrigation schedules .the panel shall be suitable for automatic operation of a single irrigation zone comprimising 35 pop up sprinklers operating simultaneously complete with testing commissioning and handing over in satisfactory working condition including PCC 1:2:4 for foundation all as specified and directed by engr in charge.

1

-

-

... More
Material and labour for laying & testing of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 4 core all as per IS , specified & directed

100

-

-

... More
M&L for sand cushioning to under ground cable providing with a layer of and 08 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed by Engr-in-charge (Note : punning thickness of 18 cm will be measured for payment)

6.1

-

-

... More
Supply and laying reinforced precast concrete cable cover m, Class LV, Type I size 250 mmx 150 MM X40 MM

450

-

-

... More
Supply, laying, testing and commissioning of popup type 360 Degree underground irrigation sprinklers complete with nozzle assembly, popup mechanism, risers, fittings and underground pipe connectivity suitable for uniform irrigation coverage and automatic concealed operation during non-working condition complete all as specified and directed.

35

-

-

... More
supply and fixing Float Switch/ Tank Level Sensors suitable for automatic operation of irrigation and centrifugal pumps based on tank water level complete with dry run protection interlocking and automatic tank filling/ stopping arrangement complete all as specified and directed.

1

-

-

... More
Testing, commissioning and trial operation of complete Smart Irrigation Automation System including PLC programming, timer setting, pressure calibration, valve sequencing, sprinkler operation, tank level automation, interlocking checks, dry run testing, functional testing and handing over complete system in satisfactory working condition all as specified and directed by Engineer-in-Charge.

1

-

-

... More
Supply, installation, testing and commissioning of High Pressure Monoblock Pump of 7.5 HP 1500 rpm 20 mtr head discharge 350 LPM suitable for smart irrigation/ sprinkler application Job complete with TEFC squirrel cage induction motor, dynamically balanced impeller, mechanical seal, cast iron body, stainless steel shaft, suction and delivery connections, base frame and all standard accessories. The pump shall be suitable for operation on 415 Volts ±10%, 3 Phase, 50 Hz AC supply and capable of delivering required discharge and pressure suitable for popup sprinkler irrigation network operation. The pump shall be designed for continuous duty operation with high efficiency and low noise/ vibration characteristics. The pump shall be suitable for automatic operation through PLC/VFD based irrigation automation system and shall operate through pressure controlled logic maintaining irrigation within specified limits. Note: The quoted rate shall include all allied works including foundation mounting,MS channel of 100 x50 x 5 mm thickness alignment,anti vibration pad arrangement, coupling, connection to suction and delivery pipeline, NRV, butterfly valve, pressure gauge, flexible connection, electrical termination, earthing, testing and commissioning complete in all respect.

1

-

-

... More
Earthing for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto , PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt 15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009.

2

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.