Maa Mahamaya Sahakari Shakkar Karkhana Maryadit Tender

Ammonium Bi-Floride MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. .BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Comman Salt

Scale Dissolver "DISSOLVO - 2P" MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. / CHEMICAL CENTER INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Scale Dissolver "DISSOLVO - CDS" MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. / CHEMICAL CENTER INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Bleaching Powder Free from hard lumps. IS:1065:1989 Grade - 1 Available chlorine 34 % by mass, min. Stability loss in chlorine on the basis of initial available chlorine, 1/15 max, Moisture 0.3 % by mass, max. Particle size (passing through 1.7 mm, IS sieve) 99.3 % by mass., Packed in 50 Kg Polythene airtight bags. MAKE - BIRLA/TATA ONLY MANUFACTUR /AUTHORIZED DEALER

Seed Slurry IPA Based Appearance @ 25*C : White opaque liquid, Specific gravity @ 25*C : 1.05 & 1.89 gm/cm3, Quantity of solid sugar : 325-400 gms/litre of sugar, Grain size : 3-4 microns (90-95 %) regular in shape., Solubility : Sugar part is miscible in water an any ratio, Co-efficient of variation : 10 %, ICUMSA : 20 IU PERFORMANCE REQUIRED CO-EFFICIENT OF VARIATION10% & ICUMSA 20 IU MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS / CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Phosphoric Acid MAKE -GACL/BIRLA ONLY MANUFACTUR /AUTHORIZED DEALER

Viscocity Reducer (Polymer Base) PERFORMANCE REQUIRED INCREASE IN EXHAUSTION% IN PAN BOILING BY 5% MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD / CHEMICAL CENTRE INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Magna Floc Lt-27 Appearance : Free flowing powder, Ionic character (Anionic) : Medium, pH of 1% solution : 9.5 to 10.5, (CIBA/BASF, It should be Importad.) PERFORMANCE REQUIRED SPECIFIC GRAVITY OF MUD1029 GM/LTR MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./ CHEMICAL CENTER INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Formaldihide (Formaline) Purity - 33% Min. Make - NUCHEN MAKE - NUCHEN/CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Antifoaming (polymer Base) PERFORMANCE REQUIRED FORMING IN SYRUP TANK MUST BE SUBSIDE. MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS / CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

i) Dithio Carbomate Base Physical appearance : Yellow liquid pH : 9 to 10. % dithio carbomate (min) 40 % by w/w PERFORMANCE REQUIRED PTY. DROP P.J TO M.J.-1.6-1.7 UNIT ,R.S./100Bx.RISE-2-3% MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

ii) Quaternary Ammonium Compound Physical appearance : colourless liquid pH :7 to 8 %, quaternary ammonium compound (min.) 40 % by w/w. PERFORMANCE REQUIRED PTY DROP P.J TO M.J.-1.6-1.7 UNIT ,R.S./100Bx.RISE-2-3% MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Lincid Oil MAKE - COW

Sulphur Bright yellow granular sulphur : * Purity - 99.90 % * Ash % - Less than 0.06 % * Moisture - Less than 0.05 % * Arsenic - Less than 0.05 % * Bituminous - Less than 0.05 % * Free from dust and Selenium MAKE - RELIANCE AND AS PER SPECIFICATION TEST CERTIFICATE REQUIRED IT SHOULD BE PACKED IN 50 KG. BAGS.

Lime (Burnt Lime) CaO Content - 85% (Min.), Selica Free Packed in Polythene Bags Dust - 1% (Max.) Unburnt Max - 1.5% PERFORMANCE REQUIRED 1.Test certificate from outside Laboratory should be approved from ISO 17025 ,ISO 14001,45001,ISO 9001 certified Laboratory .2. Test certificate from outside laboratory where report is issued ragistration no should be mentioned. 3. Test certificate should be registered fom (a) Occupational helth and safety management. (b) Environment management system. (c) Quality management. 4.Material safety declaration from manufacturer. 5.Gaurantee & warrantee certificate. Rajasthan Lime(Only Manufacturer)

Multi Purpose Colour Pracipitent PERFORMANCE REQUIRED COLOUR REDUCTION 15% & TURBIDITY REMOVED55% MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Multipurpose Biocide MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS / CHEMICAL CENTRE ONLY MANUFACTUR /AUTHORIZED DEALER

Talezine MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD.ONLY / CHEMICAL CENTRE INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Anti Scalent MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR AUTHORIZED DEALER

Colour Pracipitent for Juice PERFORMANCE REQUIRED COLOUR REDUCTION ACROSS JUICE SULPHITOR & DORR42% MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. / CHEMICAL CENTER INDIA/BONNA FIED CHEMICAL ONLY MANUFACTUR /AUTHORIZED DEALER

Colour Pracipitent for Pan PERFORMANCE REQUIRED SUGAR COLOUR 100 IU FROM METHOD GS2/3-9 MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD. / CHEMICAL CENTER INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Enzyme(DEXTRON) PERFORMANCE REQUIRED REDUCE THE LEVEL BELOW QUALIFIED LEVEL IN ALL IN HOUSE PRODUCT UP TO FINAL PRODUCT. MAKE - ALFA ENZYME/QUALIZEN CHEMICALS/CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD./CHEMBOND WATER TECHNOLOGY LTD./CHEMICAL CENTER INDIA.

Amestrase MAKE - ALFA ENZYME/QUALIZEN CHEMICALS/CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD./CHEMBOND WATER TECHNOLOGY LTD./CHEMICAL CENTER INDIA.

Starch Removal(Starch Pro) PERFORMANCE REQUIRED REDUCE THE LEVEL BELOW QUALIFIED LEVEL IN ALL IN HOUSE PRODUCT UP TO FINAL PRODUCT. MAKE - ALFA ENZYME/QUALIZEN CHEMICALS/CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD./CHEMBOND WATER TECHNOLOGY LTD./CHEMICAL CENTER INDIA.

Alfa M+/ Enzydex PERFORMANCE REQUIRED PTY. DROP M.J. TO F.J. 2 UNIT MAKE - ALFA ENZYME/QUALIZEN CHEMICALS/CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD./CHEMBOND WATER TECHNOLOGY LTD./CHEMICAL CENTER INDIA.

pH Booster for E.T.P MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./BONNAFIED CHEMICALS / CHEMICAL CENTER INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Neutrilizer(Alem) MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./BONNAFIED CHEMICALS /CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Bio-Enzime Culture -Aerobic Microbil Culture for E.T.P pin 50 Kg. HDPE Carboys Subac - C/Farmsept -SG/ Crobac-C MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./ CHEMICAL CENTRE INDIA/ BIONIC ONLY MANUFACTUR /AUTHORIZED DEALER

Activator MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./BONNAFIED CHEMICALS/CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Poly-Electrolite MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./BONNAFIED CHEMICALS/CHEMICAL CENTER ONLY MANUFACTUR /AUTHORIZED DEALER

Poly-Alluminium Chloride MAKE - CHEMSCIENCE SPACILITY CHEMICALS PVT. LTD. /QUALIZEN CHEMICALS INDIA/ CHEMBOND WATER TECHNOLOGY LTD./BONNAFIED CHEMICALS /CHEMICAL CENTER INDIA ONLY MANUFACTUR /AUTHORIZED DEALER

Nickel Chrome Screen UC 1500, Size -0.06 x 2.79 x 0.28 mm (Make - Uttam Make Countinous Machin Make-Uttam make continuous machine Atul Industries /micro screen/gurdev engineering(P) Ltd./Central Agency Only manufacture authorized Dealer

Nickel Screen UC 1100, Size -0.05 x 2.79 x 0.28 mm (Make - Uttam Make Countinous Machin Make-Uttam make continuous machine Atul Industries /micro screen/gurdev engineering(P) Ltd./Central Agency Only manufacture authorized Dealer

Brass Liner For 1250 Kg. Two Piece Size - 950 x 2260 mm, A Machin (Uttam Make) Make-Uttam make continuous machine Atul Industries /micro screen/gurdev engineering(P) Ltd./Central Agency Only manufacture authorized Dealer

S.S. Hopper Screen 4 Mesh, S.S. Wire Mesh 304 Grade Size 1.8 Mtrs. Width x 5 Mtrs. Length Make-Uttam make continuous machine Atul Industries /micro screen/gurdev engineering(P) Ltd./Central Agency Only manufacture authorized Dealer

Nickel Chrome Screen UC-1500 , Size- 0.09x2.79x0.28 MM Make-Uttam make continuous machine Atul Industries /micro screen/gurdev engineering(P) Ltd./ Only manufacture authorized Dealer

Nickel Chrome Screen UC-1100 , Size- 0.06x2.79x0.28 MM Make-Uttam make continuous machine Atul Industries /micro screen/gurdev engineering(P) Ltd./Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 6 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/ Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 8 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 10 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 12 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 14 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 16 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/ Only manufacture authorized Dealer

S.S. Screen For I/C Grader 18 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

S.S. Screen For I/C Grader 20 Mesh Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

S.S Screen for vaccumme filter Size-12''X24'' s.s perforated screen made off AISI quality for raotatory vacuume filter size-12X24' Screen Specification Size-3800 mm lengthX510 mm widthX35 mm border No. of Holes per Sq. Inch-600 no. Dia of holes- 0.05mm Make-Uttam make continuous machine Atul Industries /micro screen/Central Agency Only manufacture authorized Dealer

Stainless steel Tube for evaporater body 304 grade made of AISI quality i) S.S Tubes ID/OD - 42/45 mm Length - 2020 mm MAKE - DIVINE TUBES/ ADINOX OVERSEAS/APEX TUBES PVT.LTD. Only manufacture authorized Dealer

Stainless steel Tube for evaporater body 304 grade made of AISI quality ii)S.S Tubes ID/OD - 42/45 mm Length - 3020 mm MAKE - DIVINE TUBES/ ADINOX OVERSEAS/APEX TUBES PVT.LTD. Only manufacture authorized Dealer

Stainless steel Tube for evaporater body 304 grade made of AISI quality iii)S.S Tubes ID/OD - 42/45 mm Length - 4165 mm MAKE - DIVINE TUBES/ ADINOX OVERSEAS/APEX TUBES PVT.LTD. Only manufacture authorized Dealer

Stainless steel Tube for evaporater body 304 grade made of AISI quality iv)S.S Tubes ID/OD - 42/45 mm Length - 5020 mm MAKE - DIVINE TUBES/ ADINOX OVERSEAS/APEX TUBES PVT.LTD. Only manufacture authorized Dealer

Heavy Duty Flaxible Shaft 19 mm Inner Core Made of Spring Steel Wire & 35 mm Dia. Outer Core Made of Galvanised Steel Wire Length - 10 Mtrs. With Hand Piece Complete MAKE - DIMOND ENGINEERING /SUPERIOR ENGINEERING/S.J.ENGINNERINGS

Heavy Duty Flaxible Shaft Length - 12 Mtrs. MAKE - DIMOND ENGINEERING/SUPERIOR ENGINEERING/S.J.ENGINNERINGS

Turck Head Steel Wire Brush - 100 mm MAKE - DIMOND ENGINEERING/SUPERIOR ENGINEERING/S.J.ENGINNERINGS

Nipple B.S.P Thread For Shaft Inner Dia - 19 mm Outer Dia - 21mm MAKE - DIMOND ENGINEERING/SUPERIOR ENGINEERING/S.J.ENGINNERINGS

Heavy Duty Tool Head Cutter Jet Tool Bevel Type 15 Rollers (12 Straight + 3 Bevel) Female Threaded Suitable For S.S. I.D. Tubes Dia - 42.5 mm MAKE - DIMOND ENGINEERING/SUPERIOR ENGINEERING/S.J.ENGINNERINGS

Turck Head Steel Wire Brush 42.5 mm MAKE - DIMOND ENGINEERING /SUPERIOR ENGINEERING

Hand Trolly Sugar sack trolly of 150 kg. Capacity for heavey duty work with polymer fiber wheels (8 inch dia.)& 2inch thick with 1 inch bore. MAKE - DIMOND ENGINEERING/SUPERIOR ENGINEERING/S.J.ENGINNERINGS

Enamal White Paint (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Red Oxide (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Black Paint (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Smoke Gray (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Bus Green (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Golden Yellow (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Post Office Red (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Alluminium Paint (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Sky Blue Paint (Make - Berger & Asian) Make-Berger/Asian paint./ Indigo paints

Parameter Unit Specification:-BIS Specification for 50kg. Sugar Packing @180GMS PP Bag - Filling Net weight Kg 50 KG. Sugar Packing.Colour Biege Master Batch Visual Milky White Size (2.0+/-) ( Inside Width ) 590MM x ( Inside Length ) 910MM.Fabric weight grams 123 +/-02 GMS.Strength (fabric) (Min) kgf Min 91.8.Bottom Seal Strength kgf Min 40.8.Elongation strength % 20 +/-2.UV-NA.Mesh No's/ Inch 12x12.Tape width 2.5mm.Density Denier1000.Wiving type Crushpp grade- Reliance SG -030 % Complying with IS 10146 or IS 10910Filler /Ash % Max. 06% Mouth Visual Mouth shall be hemmed with a fold of minimum 25 mm and tapes should not fray, the loose liner, shall be inserted inside the sack and shall be hemmed in to the mouth with single hem (Zig zag cutting ) Bottom Seam Visual-The stitching of bottom seam shall be done with two rows of chain stitch (see IS 10789). The two rows of stitches shall be separated from each other by minimum 4 mm and the outer stitch shall be minimum 7 mm from the outer edge of the sacks. The stitching shall be done with double fold over seam to a depth of minimum 25 mm, so that the stitches pass through a minimum of six layers of the fabric. The number of stitches/dm shall be 14 ± 2.Ends per dm 48 +/-2.Picks per dm 48 +/-2.Printing Type Visual Stereo-Photopolymer Quality with food grade micro ink & tape & nail rub tested with water proof. Identification Mark of Sack Manufacturer Required. Recycling Logo Required. Liner Grade Food grade virgin. Granule Grade LLDPE -Reliance F19010 Liner (Virgin) = Transparent % LLDPE - IS 10146 or IS 10910 Liner (Virgin). Liner Size: Effective 650 mm W X955mm Bottom Seam Min 25 mm from bottom edge. Liner Weight grams 59 +/-2 GMS Gauge. MPCB Compliance - Declaration Printing Recycle Logo bottom of the slack liner should have manufactural detail & Recycle logo printed on it. Bale should be 500 Bag in one bale. Test Certificates - manufactures test certificate is required for every supplies made as per our prescribed format, Mandatory certificate / Accreditation requirement . 1 - Quality system ISO 9001 Accreditation. 2- Bis certification for any Food grade packing bags. Note-Manufacturer Party has submitted strictly 5-10 sample PP Bags As per BIS as above specification on before 23/08/2022 if not found Tender will be treat as reject without any prior notice. Terms & Conditions :- A ) Only BIS License Holder & Own Manufacturing Unit will be Permitted to Participate our FactoryTender. B ) Directly - Non Directly....Any Traders / Stockist / Distributor / Dealers & Agents are not Authorized&Permitted for Participation .... Whom Having No Rights to Make Us issue @ e-way Bill & Any E-Tax Invoices Directly. C ) Participants had to Strictly submit & Upload his Own Named BIS Certificate along with his Manufacturing Proof, Shop Act Copy & GST Registration Certificate. D ) In case of Purchase Order... The supplier had to strictly Print his Issued ISI BIS License No. on each Bag As Per Similar of his Tax Invoice... Without BIS Logo Material will be fully Denied & Consider As Rejected. E ) Management of MMSSK having full & final right to Accept or Non Accept offer of Any Supplier...If His Manufacturing Unit Name &License are Not Reflecting , Revealing & Indicating with Approval on Authorized Portal of Government Website - www.manakonline.in & www.bis.gov.in

Stitching Thread Lubricated 4 Ply.12 Counts Breaking Strength 5-6 kg. suitable for PP/Ganny Bags MAKE - RELIANCE

Permanent Marker MAKE - REYNOLD HD

PORTABLE BAG SEWING MACHINE(Bag Stitching machine) MAKE - STICHWELL/Master Swith

MICROPROCESSOR BASED ELECTRICAL HEATING FOR SUPER HEATED WASH WATER SYSTEM RediandsTechnochem Feb. Pvt. Ltd./Digital Enggineering

MICROPROCESSOR BASED ELECTRICAL HEATING SYSTEM FOR REHEATING THE CIRCULATION WATER FOR VERTICAL CRYSTALLIZER RediandsTechnochem Feb. Pvt. Ltd./Digital Enggineering

FILM TYPE SULPHUR BURNER -: CAPACITY - 200 KG. WITH TUBE LESS WASTE HEAT RECOVERY SYSTEM. COMPRISING OF SULPHUR MELTER , CUMBUSION CHAMBER,COUNTER CURRENT COOLING ARRANGEMENT, SULPHUR PUMPS, ELECTRICAL HEATING AND CONTROL PANNEL. 1- MELTER MS IS:2062/THK-8/10B (SIZE-2000X1500X1500) 01 NOS MAKE RTFAB 2- STEAM COILS MS SEAM LESS, A- 106 GR- B, SCH. 40 (SIZE 1000X250/1000/500) 03 NOS MAKE RTFAB 3- SULPHUR PUMP C.I/MS,SCH.40 (SIZE 50NB/20 NBX 1120) 02 NOS MAKE RTFAB 4- GEAR+MOTOR 62 RPM 3Ø 415 V AC 0.37 KW MAKE KILOSKAR/ REPUTED 5- FURANCE SHELL 10/12 MMTKH Ø1750(H-500/3500)_+500 01 NOS MAKE RTFAB 6- REFRACTORY IS:8/IS:6 75X15X230 01 NOS MAKE REPUTED 7- COOLERS MS IS : 1239, SCH. 40 300 NBX4000L 03 NOS MAKE RTFAB 8- CONTROL PANELS TEMP. INDICATORS/PID/ AC DRIVES COMPATIBILITY WITH ALL AUTOMATION SYSTEMS: PLC/DCS 01 NOS MAKE REPUTED. Make - Radiands Tech. Pvt. Ltd./ Digital Enggineering/ digital utility

ANNUAL REPARING MAINTANANCE AND CALIBERTION OF ADVANCE SUCROPOL MAKE - ADVANCE MAKE - ADVANCE

ANNUAL REPAIRING MAINTENANCE & CALIBRATION OF AUTOMETIC BOD & COD INCUBUTOR MAKE - ADVANCE

ANNUAL REPAIRING MAINTENANCE & CALIBRATION OF SPACTRO PHOTOMETER MAKE - ADVANCE

ANNUAL REPARING MAINTANANCE AND CALIBERTION OF AUTOMATIC SUGAR WEIGHING MACHINE WITH PANNEL L-SUGAR,M-SUGAR AND S-SUGAR. MAKE-KVSON.

Sugar Silo Level Sensor:-Description-1. Level Sensor type-Capactive. 2.Low Level Indication. 3. High Level Indication. 4. Sensor Intregated with Bagging Machine. 5. Control Pannel with Low/High Indication Alarm. MAKE- KVSON / MEB INDUSTRIES / HI-TECH ENGENERRRING

Simplex Bag Filling Machine- Specification:- Bag Filling capacity-20 Kg to 50 Kg. Weighing Interval-20/50 gm. Fill Type- NET. Bag Filling speed-4-5 Bag/Min. Feeder & Weigher-Dual. Bag Clamping-Single/Manual. Weighing & Filling-Auto Mode.Feeder type- Gravity gate. Filling operation- Course, Medium and Fine. Air Pressure-5-6 Kg(90 PSI).Capacity Filling- 12-15 TPH Max. Filling Material-Sugar. Weighing Sensor-Load-cell. MAKE- KVSON / MEB INDUSTRIES / HI-TECH ENGENERRRING

Duplex Bag Filling Machine- Specification:- Bag Filling capacity-20 Kg to 50 Kg. Weighing Interval-20/50 gm. Fill Type- NET. Bag Filling speed-7-8 Bag/Min. Feeder & Weigher-Dual. Bag Clamping-Single/Manual. Weighing & Filling-Auto Mode.Feeder type- Gravity gate. Filling operation- Course, Medium and Fine. Air Pressure-5-6 Kg(90 PSI).Capacity Filling- 18-20 TPH Max. Filling Material-Sugar. Weighing Sensor-Load-cell. MAKE- KVSON / MEB INDUSTRIES / HI-TECH ENGENERRRING

Lime and Alum dosing system-used for dosing of chemicals,Accessories-1000 Ltrs. MSRL Tank. capacity – 0-100 LPH. MOC- minimax/Milton Roy.

Polyelectrolyte Dosing system- For poly Dosing. Accessories-1000Ltrs. MSRL Tank. capacity – 0-40 LPH. MOC- e-dose/Minimax.

TARPAULINE IN SIZE 60’x60’ Heavy Duty As per IS:7903@PGOI Make Only.HDPE(High Density Polyethlene Geomemberbrane Tarpaulin with 05 Layer 300 Micron, UV Treated(Ultra Violet) Stabilized, 100% water Proof, With Greater strength & Stiffness, Easy to Fabricate & Weld using Thermoplastic.Density-1600 Kg/m3. Temperature of Crystalization-111.90C. Melting Point-130.80C .Specific Heat Capacity – 1640 to 2400 J/Kg-k. MAKE - ONLY MANUFATURE

TARPAULINE IN SIZE 60’x90’ Heavy Duty As per IS:7903@PGOI Make Only.HDPE(High Density Polyethlene Geomemberbrane Tarpaulin with 05 Layer 300 Micron, UV Treated(Ultra Violet) Stabilized, 100% water Proof, With Greater strength & Stiffness, Easy to Fabricate & Weld using Thermoplastic.Density-1600 Kg/m3. Temperature of Crystalization-111.90C. Melting Point-130.80C .Specific Heat Capacity – 1640 to 2400 J/Kg-k. MAKE - ONLY MANUFATURE

Mechanical Circulator for Pan(60 Ton):- Specification- Motor 45 KW/STD/IE2 Motor.RPM-52 RPM.Impeller -Wide Blade Hydraulic 1875 mm.MOC-40 gm. MAKE - GALAXY INDUSTRIES / SPRAY ENGGENERRING / NAMAN ENGG. / TECHNO TECH ENGG. / SIMPLEX ENGG.

Sulphited Juice - PH Automation MAKE - ABB / FORBES MARSHALL ENGGINEERING/HONEY WELL

Vibro Screen for Filtrate Juice Specification - 60 Inch Dia vibroscreen machine all contact parts ss304 fitted with 80 mesh screen supported on MS base stant in fitted with 1.5 HP vibrating motor , without top cover MAKE - SIMPLEX/MILAGREEN INDUSTRIES/NISHI TECNHO SYSTEM

Vibro Screen for Milk Of Lime Specification - 60 Inch Dia vibroscreen machine all contact parts ss304 fitted with 40 mesh screen supported on MS base stant in fitted with 1.5 HP vibrating motor , without top cover MAKE - SIMPLEX/MILAGREEN INDUSTRIES/NISHI TECNHO SYSTEM

Dry Seed Crystalizer (20 MT) MAKE-UTTAM INDUSTRIES/SHRIJEE INDUSTRIES/N R FABRICATOR/chinchwade Associates

Rori Melter Size-OD-1.5 Mtr. Hight-2.5 Mtr., Pipe Line 3" Dia With Pump. MAKE-UTTAM INDUSTRIES/SHRIJEE INDUSTRIES/N R FABRICATOR/chinchwade Associates

Vacuum Pump Capacity 36 m3/Min. MAKE-PPI HP-100 RPM-705

Rota Pump Capacity 25 Tone/Hrs. MAKE - GALAXY INDUSTRIES / SPRAY ENGGENERRING / NAMAN ENGG. / TECHNO TECH ENGG. / SIMPLEX ENGG.

Pan Cut-over Pnumatic crystalizer valave 12" Dia. Rubber Bucket and Seal Kit. MAKE- PURI INDUSTRIES

Horizontal Belt Conveyer :- Size :- Width - 864 mm , Length - 18 mtr , Height - 800 mm(Agitator Side) Height - 1000 mm (Drive Side) Gear box with Motor - Model MIB - 304/1325 -4/38 Sr. No. - 131204000039287 Motor - RPM - 1455 , HP - 7.5 hp , KW - 5.5 kw MAKE - DYNAMIC RUBBER/ SIMPLEX ENGGINEERING / ROHAN ENGGINEERING

Belt Staicker (Truck Unloader) Height ( Drive Side) - 1250 mm, Height - 85 mm Belt Type - 3 Ply, Belt Width - 500 mm, Staicker Width - 700 mm, Length of Staicker - 5400 mm Primium Worm Reducer - Type - A 237 , Ratio - 30/1,Sr. No. - 6R 94060 Motor - RPM - 1410, kw - 1.1, Hp -1.5 MAKE - DYNAMIC RUBBER/ SIMPLEX ENGGINEERING / ROHAN ENGGINEERING

Bucket Elevetor MAKE - GALAXY INDUSTRIES / SPRAY ENGGENERRING / NAMAN ENGG. / TECHNO TECH ENGG. / SIMPLEX ENGG.

Weighing Machine for Sugar House Capacity-100 Kg MODEL NO-E1005,SUPLLY 230V,50Hz. MAKE-AVERY INDIA LIMITED

PIEZO METER MAKE - N. T. BLOOMFILED / HI-TECH ENGENERRRING

M. S. SLAT CONVEYER SLAT WIDTH - 350 MM, CONVEYER HEIGHT - 275 MM, CONVEYER LENGTH -30 - 35 MTR MAKE - MASTERTECH / STICH WELL

Complete Ball Mill For Seed Slurry MAKE- SUGFAB CORPORATION

Semi Kestner Evaporator Body-Specification- Type- Long tube rising film type evaporator, Heating Surface 1400 m2. Working 1st Effect. Vapour separator- Inbuilt type poly baffles with involute catchall. Vapour space height-5500 mm. Tube size-45 ODX 1.6 Thik X 5000 Long(Tube theckness 1.6 as per standard). Tube MOC- ASTM A249 TP304.No. of tubes 2084 Quoted Separately.Tube Pitch-58 MM. Plate Thickness & MOC- Tube Plate 32 MM (MS IS 2062).Calandria & Body Shell 16 MM(MS IS 2062).Steam Jacket 12 MM (MS IS 2062).Top Cone 16 MM (MS IS 2062).Bottom Cone 18 MM (MS IS 2062). Catchall shell 12 MM (MS IS 2062).Catchall internal shell 10 MM (MS IS 2062).Top cover palte 18 MM (MS IS 2062). Poly baffles 0.9 MM(SS 304).Nozzle connection & valves:- Steam inlet connection-700 mm NB X 01 no. MS Fab Right angle valve.Vapour outlet connection-800 mm NB X 01 no. MS Fab Right angle valve.Juice inlet connection-200 mm NB X 1 no. CI Globe valve. Juice outlet connection -200 mm NB X 1 no. CI Globe valve. Juice recirculation connection -200 mm NB X 1 no. CI Globe valve. Condensate outlet-150 mm NB X 2 no. CI Gate valve-200NB X 01 no. Water inlet Body & calandria- 100 mm NB X 02 no.-CI Gate valve. Washout connection-150 mm NB X 1 no.-CI Gate valve.External Nox gas outlet 40 mm NB X (4+4) no for Light & Heavy. External Nox gas outlet header-80 mm NB X (1+1) no-CI Globe valve for light & heavy.Internal Nox gas outlet 40 mm NB X (2+2) nofor light & heavy.Internal Nox gas outlet header 65 mm NB (1+1) no- CI Globe valve for light & heavy.Safety valve to calandria & body-150 mm NB 2 no-CI spring loaded valve.Caustic Soda connection-100 mm NB X 1 no- CI Gate valve. Air vent with dummy flange 150 mm NB X 1 no. Accessories:- Sight & light glass-200 mm Dia X 04 no. Manhole-500 mm Dia X 04 no. Temperature Gauge-150mm Dia, dial Range: 0-150 Deg.C X 2 no. Pressure Gauge 150 mm Dia. dial, range: 0-3Kg/cm2(g) X 2 no. Chairs-4 shall be sent loose site weld. MAKE-UTTAM INDUSTRIES/SHRIJEE INDUSTRIES/N R FABRICATOR/chinchwade Associates

Vapour Cell Robert Type-Specification- Type- Robert type Evaporator(Conventional), Heating Surface 1600 m2.Catchall type-Centrifugal followed by umbrella cone. Vapour space height-4000 mm(Above top tube plate).Tube Details:-Tube size-45 ODX 1.6 Thik X 2010 Long(Tube theckness 1.6 as per standard). Tube MOC- ASTM A249 TP304.No. of tubes 6050 Quoted Separately.Tube Pitch-58 MM. Plate Thickness & MOC- Tube Plate 32 MM (MS IS 2062).Calandria & Body Shell 16 MM(MS IS 2062).Steam Jacket 12 MM (MS IS 2062).Top Cone 16 MM (MS IS 2062).Bottom Cone 20 MM (MS IS 2062).Down take shell 16 MM(MS IS 2062). Catchall shell 12 MM (MS IS 2062).Catchall internal shell 10 MM (MS IS 2062).Top cover palte 20 MM (MS IS 2062). Centrifugal vans 08 MM(MS IS 2062).Vapour outlet pipe-10 MM (MS IS 2062).Nozzle connection & valves:- Vapour inlet connection-700 mm NB X 01 no. MS Fab Right angle valve.Vapour outlet connection-800 mm NB X 01 no. MS Fab Right angle valve.Juice inlet connection-200 mm NB X 1 no. CI Globe valve. Juice outlet connection -200 mm NB X 1 no. CI Globe valve. Condensate outlet-100 mm NB X 2 no.Condensate outlet header- 150 mm NB X 01 no.-CI Gate valve. Washout connection-150 mm NB X 1 no.-CI Gate valve.External Nox gas outlet 40 mm NB X (4+4) no for Light & Heavy. External Nox gas outlet header-80 mm NB X (1+1) no-CI Globe valve for light & heavy.Internal Nox gas outlet 40 mm NB X (2+2) no for light & heavy.Internal Nox gas outlet header 65 mm NB (1+1) no- CI Globe valve for light & heavy.Drain connection 150 mm NB X 1 no-CI gate valve.Safety valve to calandria & body-100 mm NB 2 no-CI spring loaded valve.Caustic Soda connection-80 mm NB X 1 no- CI Gate valve. Air vent with dummy flange 150 mm NB X 1 no. Accessories:- Sight & light glass-200 mm Dia X 04 no. Manhole-500 mm Dia X 04 no. Temperature Gauge-150mm Dia, dial Range: 0-150 Deg.C X 2 no. Pressure Gauge 150 mm Dia. dial, range: 0-3Kg/cm2(g) X 2 no. Chairs-4 shall be sent loose for site weld. MAKE-UTTAM INDUSTRIES/SHRIJEE INDUSTRIES/N R FABRICATOR/chinchward Associates

Robert Type Evaporator Body-Specification- Type- Robert type Evaporator(Conventional), Heating Surface 900 m2.2nd Effect.Catchall type-Centrifugal followed by umbrella cone. Vapour space height-4000 mm(Above top tube plate).Tube Details:-Tube size-45 ODX 1.6 Thik X 2010 Long(Tube theckness 1.6 as per standard). Tube MOC- ASTM A249 TP304.No. of tubes 3404 Quoted Separately.Tube Pitch-58 MM. Plate Thickness & MOC- Tube Plate 32 MM (MS IS 2062).Calandria & Body Shell 16 MM(MS IS 2062).Steam Jacket 12 MM (MS IS 2062).Top Cone 16 MM (MS IS 2062).Bottom Cone 18 MM (MS IS 2062).Down take shell 16 MM(MS IS 2062). Catchall shell 12 MM (MS IS 2062).Catchall internal shell 10 MM (MS IS 2062).Catchall Top cover palte 20 MM (MS IS 2062). Centrifugal vans 08 MM(MS IS 2062).Vapour outlet pipe-10 MM (MS IS 2062).Nozzle connection & valves:- Vapour inlet connection-600 mm NB X 01 no. MS Fab Right angle valve.Vapour outlet connection-700 mm NB X 01 no. MS Fab Right angle valve.Juice inlet connection-200 mm NB X 1 no. CI Globe valve. Juice outlet connection -200 mm NB X 1 no. CI Globe valve. Condensate outlet-100 mm NB X 2 no.Condensate outlet header- 150 mm NB X 01 no.-CI Gate valve. Washout connection-150 mm NB X 1 no.-CI Gate valve.External Nox gas outlet 40 mm NB X (4+4) no for Light & Heavy. External Nox gas outlet header-80 mm NB X (1+1) no-CI Globe valve for light & heavy.Internal Nox gas outlet 40 mm NB X (2+2) no for light & heavy.Internal Nox gas outlet header 65 mm NB (1+1) no- CI Globe valve for light & heavy.Drain connection 150 mm NB X 1 no-CI gate valve.Cold water inlet to body & calandria-100 mm NB X 2 no-CI Gate valve.Safety valve to calandria & body-100 mm NB 2 no-CI spring loaded valve.Caustic Soda connection-80 mm NB X 1 no- CI Gate valve. Air vent with dummy flange 150 mm NB X 1 no. Accessories:- Sight & light glass-200 mm Dia X 04 no. Manhole-500 mm Dia X 04 no. Temperature Gauge-150mm Dia, dial Range: 0-150 Deg.C X 2 no. Pressure Gauge 150 mm Dia. dial, range: 0-3Kg/cm2(g) X 2 no. Chairs-4 shall be sent loose for site weld. MAKE-UTTAM INDUSTRIES/SHRIJEE INDUSTRIES/N R FABRICATOR/chinchwade Associates