Maa Mahamaya Sahakari Shakkar Karkhana Maryadit Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Maa Mahamaya Sahakari Shakkar Karkhana Maryadit Tender
Civil And Construction
Opening Date28 Sep 2024
Closing Date28 Oct 2024
Tender AmountRefer Documents
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
1498-04 General Engineering & Manufecturing Department Items
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
159281Bid Award Id
ViewTender No
159281Tender Authority
Maa Mahamaya Sahakari Shakkar Karkhana Maryadit ViewPurchaser Address
-Website
http://eproc.cgstate.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
OIL SEAL 75X105X13 (micoda/sun) MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
35
-
-
OIL SEAL 225X300X37 MAKE-MICOD/ RAJHANS/NILKAMAL/SUPER GOLD
28
-
-
OIL SEAL 38X55X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER BOND
72
-
-
OIL SEAL 48X80X10 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
59
-
-
OIL SEAL 50X75X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
OIL SEAL 40X55X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
91
-
-
OIL SEAL 45X70X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
42
-
-
M.S. WASHER 1/2" MAKE - STANDARD QUALITY
25
-
-
M.S. WASHER & PLAIN 3/4" MAKE - STANDARD QUALITY
25
-
-
M.S. WASHER PLAIN 1 INCH MAKE - STANDARD QUALITY
25.6
-
-
M.S. SHORT BEND C-CLASS 1/2''MAKE-STANDARD QUALITY
3
-
-
M.S. SHORT BEND C-CLASS 3/4''MAKE-STANDARD QUALITY
3
-
-
OIL SEAL 400X500X50 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
30
-
-
OIL SEAL 72X105X13 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER BOND
39
-
-
M.S. BOLT WITH NUT HALF THREAD 3/8" X 2.5" MAKE - STANDARD QUALITY
50
-
-
OIL SEAL 42X55X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
41
-
-
M.S. BOLT WITH NUT 16X130 MM MAKE - STANDARD QUALITY
50
-
-
OIL SEAL 42X72X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
27
-
-
OIL SEAL 45X60X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
48
-
-
OIL SEAL 70X90X10 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
27
-
-
OIL SEAL 50x75x12 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
Oil seal 24X42X7 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
20
-
-
Oil Seal 54X72X10 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
32
-
-
Oil Seal 35X47X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
3
-
-
Rubber Oil seal 48X62X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
39
-
-
Oil Seal 55X75X9 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
48
-
-
Oil Seal 135X165X13 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
16
-
-
M.S. SHORT BEND C-CLASS 10'' MAKE-STANDARD QUALITY
1
-
-
M.S. SHORT BEND C-CLASS 12'' MAKE-STANDARD QUALITY
1
-
-
OIL SEAL - 60 X 65 X 10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
oil seal 60x80x10 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
55
-
-
oil seal 100x130x13 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
OIL SEAL 70x90x13 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
19
-
-
OIL SEAL 40x60x10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
50
-
-
M.S. BOLT WITH NUT (F.T.) 6X50 MM MAKE - STANDARD QUALITY
50
-
-
OIL SEAL 38X55X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER BOND
54
-
-
OIL SEAL 88.9X114.3X12.7 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
OIL SEAL 48X72X10 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
45
-
-
OIL SEAL 55X80X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
43
-
-
OIL SEAL 45X70X12 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
42
-
-
OIL SEAL 30X20X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
M.S. SHORT BEND C-CLASS 2.5" THICKNESS OF BEND - 4.5 MM MAKE-STANDARD QUALITY
1
-
-
M.S. NUT WITH BOLT SIZE 20X75 MM MAKE - STANDARD QUALITY
100
-
-
OIL SEAL 60X80X12 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
15
-
-
M.S. NUT BOLT 16X60MM F.T. MAKE - STANDARD QUALITY
51
-
-
M.S. NUT BOLT 12X75MM MAKE - STANDARD QUALITY
100.8
-
-
Oil Seal 85x110x13 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
16
-
-
Oil Seal 300x375x37 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
101
-
-
Oil Seal 350x450x50 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER BOND
1
-
-
Rubber Oil Seal 40x58x10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
OIL SEAL - 320X280X20 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
15
-
-
OIL SEAL 28X45X10MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
20
-
-
OIL SEAL 65X90X10 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
41
-
-
M.S. SHORT BEND 1.5" C CLASS THICKNESS OF BEND - 4 MM MAKE-STANDARD QUALITY
1
-
-
OIL SEAL 50X80X10 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
34
-
-
OIL SEAL - 34.93X47.62X7.93 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
OIL SEAL - 42 X 63 X 9 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
30
-
-
RUBBER OIL SEAL 50X85X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
71
-
-
OIL SEAL 52X72X12 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
M.S. BOLT WITH NUT HALF THREAD -5/8X2" MAKE - STANDARD QUALITY
80
-
-
M.S. BOLT WITH NUT HALF THREAD -5/8X3"MAKE - STANDARD QUALITY
90.1
-
-
M.S. BOLT WITH NUT HALF THREAD -5/8X4" MAKE - STANDARD QUALITY
90
-
-
RUBBER OIL SEAL 110X140X13 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER BOND
35
-
-
OIL SEAL 42X62X8 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
45
-
-
OIL SEAL 48X58X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
20
-
-
M.S. BOLT WITH NUT HALF THREAD 5/8"X5" MAKE - STANDARD QUALITY
50
-
-
M.S. NUT BOLT 10X70MM MAKE - STANDARD QUALITY
80
-
-
M.S. Bolt with Nut - 3/4" x 2.5" (H.T) MAKE - STANDARD QUALITY
135
-
-
OIL SEAL 50X80X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
35
-
-
OIL SEAL 58X80X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
40
-
-
OIL SEAL 35X50X10 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
23
-
-
OIL SEAL 18X32X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
28
-
-
OIL SEAL - 24 X 38 X 10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
18
-
-
M.S. BOLT WITH NUT FULL THREAD 12X40 MAKE - STANDARD QUALITY
50
-
-
M.S. BOLT WITH NUT 20X65 MAKE - STANDARD QUALITY
100
-
-
M.S. BOLT WITH NUT 8X50 MAKE - STANDARD QUALITY
51.42
-
-
OIL SEAL 250X354X47 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
4
-
-
OIL SEAL 250x354x50 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
26
-
-
M.S. ROD 10 MM
100
-
-
M.S. ROD 20 MM
150
-
-
M.S. BOLT WITH NUT HALF THREAD-1/2'X2.1/2' MAKE - STANDARD QUALITY
90
-
-
M.S. BOLT WITH NUT HALF THREAD-3/4'X5' MAKE - STANDARD QUALITY
50
-
-
M.S. BOLT WITH NUT HALF THREAD-7/8'X5')MAKE - STANDARD QUALITY
90
-
-
M.S. BOLT WITH NUT 20X80 MM (H.T.) MAKE - STANDARD QUALITY
50
-
-
M.S. BOLT WITH NUT-6X25MM (F/T) MAKE -- STANDARD QUALITY
150
-
-
OIL SEAL -24X47X7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
34
-
-
OIL SEAL - AM/L 280 X 320 X 15 EUREKA MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
1
-
-
OIL SEAL -50X70X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
132
-
-
OIL SEAL 30X45X10 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
M.S. Rod 30mm MAKE - STANDARD QUALITY
200
-
-
M.S. Rod 40mm MAKE - STANDARD QUALITY
250
-
-
SPARE KIT 3TF 51 MAKE - SIEMENS
3
-
-
M.S.Bolt With Nut 10x60 (F.T.) MAKE - STANDARD QUALITY
50
-
-
M.S. BOLT WITH NUT 16X65 MM (H.T.) MAKE - STANDARD QUALITY
180
-
-
M.S.Bolt With Nut 12X65MM (F.T.) MAKE - STANDARD QUALITY
90.5
-
-
M.S.BOLT WITH NUT F.T. 8X65MM MAKE - STANDARD QUALITY
50
-
-
M.S.Bolt WITH NUT F.T. 10X50MM MAKE - STANDARD QUALITY
50
-
-
Oil Seal 30x47x6O MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
Oil Seal 50x72x10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
45
-
-
Oil Seal 35x45x7 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
50
-
-
M.S. Stud Bolt (Two Side Thred)-16x75mm MAKE - STANDARD QUALITY
90
-
-
SPARE KIT 3TF 47 SPARE KIT 3TF 47 MAKE - SIEMENS
11
-
-
SPARE KIT 3TF 49 SPARE KIT 3TF 49 MAKE - SIEMENS
5
-
-
SPARE KIT 3TF 50 MAKE - SIEMENS
3
-
-
SPARE KIT MNX 32 MAKE - L&T/SCHNEIDER
3
-
-
SPARE KIT MNX 40 MAKE - L&T/SCHNEIDER
3
-
-
SPARE KIT MNX 50 MAKE - L&T/SCHNEIDER
18
-
-
SPARE KIT MNX 80 MAKE - L&T/SCHNEIDER
17
-
-
SPARE KIT MNX 110 MAKE - L&T/SCHNEIDER
2
-
-
M.S. STUD BOLT (TWO SIDE THREAD) 16X65 MM MAKE - STANDARD QUALITY
90
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 16X50 MM MAKE - STANDARD QUALITY
90
-
-
M.S. STUD BOLT (TWO SIDE THREAD) 18X75 MM MAKE - STANDARD QUALITY
70
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 16X100 MM MAKE - STANDARD QUALITY
90
-
-
OIL SEAL 0781X1250X0250 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 12X50 MM MAKE - STANDARD QUALITY
80
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 18X65 MM MAKE - STANDARD QUALITY
80
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 16X125 MM MAKE - STANDARD QUALITY
100
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 12.5X100 MM MAKE - STANDARD QUALITY
80
-
-
DISMENTLING , ERECTION,(GRINDING ,ALIGNMENT .FITTING AND WELDING) OF FLAT RUNNER,SIZE - 65X8 MM CANE CARRIER,LONG RAKE , INTER RAKE , AS PER EXISTING RUNNER,RATE - PER MTR
1000
-
-
OIL SEAL 65X85X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
4
-
-
M.S.BOLT WITH NUT 20X225 M.M MAKE - STANDARD QUALITY
25
-
-
OIL SEAL 20x30x8 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
OIL SEAL 75X100X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER BOND
4
-
-
OIL SEAL 30X45X7 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
OIL SEAL 30X50X7 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
15
-
-
OIL SEAL 42X63X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
8
-
-
OIL SEAL 42X65X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL 24X42X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
18
-
-
OIL SEAL 55X75X12 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL 100X130X15 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
OIL SEAL 137X187X31 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
OIL SEAL 50X72X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
13
-
-
OIL SEAL 40X50X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL 40X85X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
1
-
-
OIL SEAL 40X80X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
18
-
-
OIL SEAL 19X32X7MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
11
-
-
OIL SEAL 35X50X7 MAKE- MICODA RAJHANS/NILKAMAL/SUPER GOLD
20
-
-
OIL SEAL 24X42X8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
17
-
-
WORK FOR REPLACEMENT OF WORN OUT EXISTING RAILSQURE BAR 65x65MM CANE UNLOADER, (DISMETNLING ,GRINDING,ALINE AND WELDING WITH TRAIL OF CANE UNLOADER) ,WITH ONE COAT RED OXIDE , RATE - PER TON
10
-
-
WORK FOR SIDE PLATE OF CANE CARRIER,INTER RAKE,LONG RAKE,BAGASSE ELIVATOR, MBC,RBC, FABRICATION AND ERECTION OF MS SIDE PLATE OF CANE CARRIER,INTER RAKE,LONG RAKE,BAGASSE ELIVATOR, MBC,RBC, BY 6 TO 10 MM THICKNESS. M.S. PLATE.,WITH ONE COAT RED OXIDE ,RATE - PER TON
10
-
-
DISMENTLING , ERECTION,(GRINDING ,ALIGNMENT .FITTING AND WELDING) OF FLAT RUNNER,SIZE - 100X10 MM BAGASSE CARRIER M.B.C., R.B.C AND BAGASSE ELIVATOR. AS PER EXISTING RUNNER , RATE - PER MTR
1000
-
-
DISMENTLING , FABRICATION AND ERECTION OF BOTTOM TRAY/TROUGH OF BAGASSE CARRIER M.B.C., R.B.C AND BAGASSE ELIVATOR. AS PER EXISTING TRAY ,RATE - PER TON
10
-
-
REPLACEMENT OF WORNOUT HOOD OF CHOPPER , LEVELER FABRICATED BY 10/12 MM M.S. PLATE THICKNESS ,WITH ONE COAT RED OXIDE.,RATE - PER TON
5
-
-
REPLACEMENT OF WORNOUT SIDE PLATE OF FIBRIZER ( OPENING & DISCHARGE SHOOT AND BODY IN SIDE) BY M.S. PLATE OF 6 MM, 8 MM, 10 MM, M.S. PLATE INCLUDING HOOD,,WITH ONE COAT RED OXIDE ,RATE - PER TON
10
-
-
REPLACEMENT OF RAKE (LONG RAKE & INTER RAKE ), INCLUDIN DISMANTLING & REPLACEMENT OF RAKE BOLTING, ALIGNMENT AND TRAIL ,WITH ONE COAT RED OXIDE , ,RATE - PER NOS
200
-
-
REPLACEMENT OF RAKE OF BAGGASSE ELEVATOR, MAIN BAGASSE CARRIER & R.B.C. INCLUDING DISMANTLING & REPLACEMENT RAKE ,BOLTING, ALIGNMENT AND TRAIL ,WITH ONE COAT RED OXIDE , ,RATE - PER NOS
200
-
-
DISMENTLING OF PIPE LINE DIA -1/2" TO 6" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
900
-
-
FITTING OF M.S. PIPE LINE 1/2" TO 6" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
900
-
-
FABRICATION & ERRECTION OF M.S. PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - 1/2' TO 6" WITH ONE COAT RED OXIDE ,RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
900
-
-
DISMENTLING OF PIPE LINE DIA 8" TO 12" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
FABRICATION & ERRECTION OF M.S. PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - 8" TO 12" ,WITH ONE COAT RED OXIDE ,RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
DISMENTLING OF WORNOUT M.S. FABRICATED PIPE LINE DIA 14" TO 24" (WATER LINE, EXHAUST LINE & VAPOUR STEAM LINE ETC) RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
FITTING OF M.S. PIPE LINE 14" TO 24" (WATERLINE, EXHAUST LINE & VAPOUR STEAM LINE) RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
FABRICATION & ERRECTION OF M.S. PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - 14" TO 24" (WATER LINE, EXHAUST LINE & VAPOUR STEAM LINE),WITH ONE COAT RED OXIDE , RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
DISMENTLING OF WORNOUT M.S. FABRICATED PIPE LINE DIA 25" TO 44" (WATER LINE, EXHAUST LINE & VAPOUR STEAM LINE) RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
100
-
-
FITTING OF M.S. PIPE LINE 25" TO 44" (WATERLINE, EXHAUST LINE & VAPOUR STEAM LINE),WITH ONE COAT RED OXIDE , RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
100
-
-
FABRICATION & ERRECTION OF M.S. PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - 25" TO 44" (WATER LINE, EXHAUST LINE & VAPOUR STEAM LINE),WITH ONE COAT RED OXIDE , RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
100
-
-
DISMENTLING OF IBR PIPE LINE DIA- 1/2" TO 3" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
FITTING OF IBR PIPE LINE DIA- 1/2'" TO 3" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
FABRICATION & ERRECTION OF IBR PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - DIA- 1/2" TO 3" WITH ONE COAT RED OXIDE , RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
DISMENTLING OF IBR PIPE LINE DIA- 4" TO 8" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
100
-
-
SURFACE DRESSING OF THE GROUND UPTO 1.5M INCLUDING REMOVING VEGETATION AND MAKING UP UNDULATIONS AND IN-EQUALITIES NOT EXCEEDING 15 CMS IN DEPTH/HEIGHT INCLUDING DISPOSAL OF RUBBISH UPTO 1.5M LIFT AND LEAD UPTO 50M (AT LEAST 5M AWAY FROM THE DRESSED AREA)
1000
-
-
EARTH EXCAVATION UPTO 1.5 MTR EXCAVATION FOR ALL TYPES AND SIZES OF FOUNDATIONS, TRENCHES AND DRAINS OR FOR ANY OTHER PURPOSE INCLUDING DISPOSAL OF EXCAVATED STUFF UPTO 1.5M LIFT AND LEAD UPTO 50M (AT LEAST 5 M AWAY FROM THE EXCAVATED AREA), INCLUDING DRESSING AND LEVELING OF PITS IN ALL TYPES OF SOIL
700
-
-
EARTH EXCAVATION ABOVE 1.5 MTR EXCAVATION FOR ALL TYPES AND SIZES OF FOUNDATIONS, TRENCHES AND DRAINS OR FOR ANY OTHER PURPOSE INCLUDING DISPOSAL OF EXCAVATED STUFF UPTO 1.5M LIFT AND LEAD UPTO 50M (AT LEAST 5 M AWAY FROM THE EXCAVATED AREA), INCLUDING DRESSING AND LEVELING OF PITS EXTRA FOR EVERY ADDITIONAL LIFT OF 1.5M OR PART THEREOF IN ALL TYPES OF SOIL
700
-
-
FILLING IN PLINTH PROVIDING AND FILLING IN PLINTH WITH SAND/CRUSHER DUST AND HARD MOORUM UNDER FLOOR IN LAYERS NOT EXCEEDING 20 CM IN DEPTH CONSOLIDATING EACH DEPOSITED LAYER BY RAMMING AND WATERING, INCLUDING DRESSING ETC. COMPLETE.
1
-
-
PCC WITH MATERIAL PROVIDING AND LAYING NOMINAL MIX CEMENT CONCRETE WITH CRUSHED STONE AGGREGATE USING CONCRETE MIXER IN FOUNDATION, PLINTH AND AT GROUND LEVEL EXCLUDING COST OF FORM WORK 1:3:6 (1 CEMENT : 3 COARSE SAND : 6 GRADED STONE AGGREGATE 40 MM NOMINAL SIZE)
1000
-
-
RCC WITH MATERIAL PROVIDING AND LAYING NOMINAL MIX REINFORCEMENT CEMENT CONCRETE WITH CRUSHED STONE AGGREGATE USING CONCRETE MIXER IN ALL WORKS UPTO FLOOR FIVE LEVEL EXCLUDING COST OF REINFORCEMENT AND FORM WORK 1:1-1/2:3 (1 CEMENT : 1-1/2 COARSE SAND : 3 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE)
1200
-
-
FORMWORK FOR COLUMN, PILLARS, PIERS AND RECTANGULAR OR SQUARE SHAPE PROVIDING AND FIXING FORMWORK INCLUDING CENTERING, SHUTTERING, STUTTING, STAGING PROPPING BRACING ETC. COMPLETE AND INCLUDING ITS REMOVAL AT ALL LEVELS FOR COLUMNS, PILLARS, PIERS AND LIKE - RECTANGULAR OR SQUARE IN SHAPE
1000
-
-
FORMWORK FOR FOUNDATION AND SUB STRUCTURE PROVIDING AND FIXING FORMWORK INCLUDING CENTERING, SHUTTERING, STUTTING, STAGING PROPPING BRACING ETC. COMPLETE AND INCLUDING ITS REMOVAL AT ALL LEVELS FOR FOUNDATIONS, FOOTINGS, BASE OF COLUMNS AND PLINTH BEAM IN ANY SHAPE AND SIZE
1000
-
-
FORMWORK OF BEAMS, LINTELS, CANTILEVERS AND WALLS PROVIDING AND FIXING FORMWORK INCLUDING CENTERING, SHUTTERING, STUTTING, STAGING PROPPING BRACING ETC. COMPLETE AND INCLUDING ITS REMOVAL AT ALL LEVELS FOR BEAMS, LINTELS, CANTILEVERS & WALLS
1000
-
-
FORMWORK FOR WEATHER SHADE, CHHAJJA, CORNICES AND MOULDINGS PROVIDING AND FIXING FORMWORK INCLUDING CENTERING, SHUTTERING, STUTTING, STAGING PROPPING BRACING ETC. COMPLETE AND INCLUDING ITS REMOVAL AT ALL LEVELS FOR WEATHER SHADE, CHHAJJA, CONICES AND MOULDINGS
1000
-
-
POSITION OF REINFORCEMENT FOR R.C.C PROVIDING AND PLACING IN POSITION REINFORCEMENT FOR R.C.C. WORK INCLUDING STRAIGHTENING, CUTTING, BENDING, BINDING ETC. COMPLETE AS PER DRAWINGS INCLUDING COST OF BINDING WIRE ALL COMPLETE THERMO-MECHANICALLY TREATED BARS FE415 AND FE500
30
-
-
M.S. ROUND HOLDING PROVIDING AND FIXING M.S. ROUND HOLDING DOWN BOLTS WITH NUTS, WASHER AND PLATE IN CEMENT CONCRETE COMPLETE
1
-
-
BRICKS WORK WITH MATERIAL BRICK WORK WITH MODULAR FLY ASH LIME BRICKS (FALG BRICKS) CONFIRMING TO IS:12894-2002 OF CLASS DESIGNATION 40 IN FOUNDATION AND PLINTH IN CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND)
200
-
-
PLASTRING UNDER 12MM THICKNESS 12 MM THICK CEMENT PLASTER OF MIX IN CEMENT MORTAR 1:5 (1 CEMENT : 5 FINE SAND)
1000
-
-
NEAT CEMENT PUNNING
500
-
-
PLASTERING UPPER 12MM TO 18MM THICK CEMENT PLASTER WITH UNDER LAYER OF 12 MM THICK CEMENT PLASTER 1:5 (1 CEMENT : 5 FINE SAND) AND FINISHED WITH TOP LAYER OF 6 MM THICK CEMENT PLASTER 1:3 (1 CEMENT : 3 FINE SAND)
1000
-
-
IPS FLOORING 40MM THICK With Material,Cement,sand,Blast etc..After completion of work contractor will be submitted measurement book duly checked and veryfied by at least sub engineer of PWD or RES
100
-
-
BOLDER LAYING WITH GAP FILLING OVER SIZE Bolder laying with gap filling over size dismantling(Excluding
material),.After completion of work contractor will be submitted measurement book duly checked and veryfied by at least sub engineer of PWD or RES
500
-
-
WATER STOPER FIXING AFTER COMPLETOIN OF WORK Water stopper fixing,.After completion of work contractor will be submitted measurement book duly checked and veryfied by at least sub engineer of PWD or RES
1
-
-
MIX GRAVEL FILLING COMPACTION Mix Gravel filling Compaction (including material),.After completion of work contractor will be submitted measurement book duly checked and veryfied by at least sub engineer of PWD or RES
1000
-
-
RENOVATION OF HOT WATER RCC TANK Renovation of Hot Water RCC Tank,Size - L- 10.20 Mtr , W - 10.50 Mtr, Depth- 3.60 Mtr,As per Existing Tank.
1
-
-
SUPPLY OF CEMENT BAG, MAKE - UTRA TECH, ACC EACH BAG 50KG
1508
-
-
SUPPLY OF GITTI / STONE GRAVELS 10 TO 20MM Supply of Gtti/Stone Gravels 10 TO 20 mm
2000
-
-
SUPPLY OF 40 MM STONE (GITTI)
1200
-
-
SUPPLY OF REINFORCEMENT / SARIYA TMT BAR SIZE - 8 TO 12 MM
10
-
-
Supply of Reinforcement/Sariya/ TMT Bar ,Size - 16 TO 25 mm
10
-
-
Supply of Sand / Balu
2000
-
-
Supply of Cement Bricks, Size - 9''x4''x3''
5000
-
-
Supply of Paver color full primium Bricks,Size - 60 mm thick,standard size
5000
-
-
OIL SEAL - 69 X 78 X 7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
53
-
-
FITTING OF IBR PIPE LINE DIA- 4" TO 8" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
100
-
-
FABRICATION & ERRECTION OF IBR PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - DIA- 4" TO 8" WITH ONE COAT RED OXIDE , RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
100
-
-
DISMANTLING OF S.S PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - DIA 2'' TO 6' RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH
50
-
-
FITTING OF SS PIPE LINE DIA 2'' TO 6'' RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH
50
-
-
FABRICATION AND ERECTION OF SS PIPE LINE WITH NIPPLE AND REDUCER,PIPE SIZE - DIA 2'' TO 6'' WITH ONE COAT RED OXIDE ,RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH
50
-
-
FABRICATION OF BEND ,WITH ONE COAT RED OXIDE ,SIZE - 2'' TO 6'' PIPE DIA, RATE - PER NOS
100
-
-
FABRICATION OF BEND ,WITH ONE COAT RED OXIDE ,SIZE - 8'' TO 16'' PIPE DIA, RATE - PER NOS
100
-
-
FABRICATION OF BEND ,WITH ONE COAT RED OXIDE ,SIZE - 18'' TO 30'' PIPE DIA, RATE - PER NOS
50
-
-
FABRICATION OF BEND SIZE - 32'' TO 44'' PIPE DIA, RATE - PER NOS
30
-
-
ERECTION ,FITTING AND WELDING OF BEND,WITH ONE COAT RED OXIDE ,, SIZE - 2'' TO 6'' PIPE DIA, RATE - PER NOS
100
-
-
ERECTION FITTING AND WELDING OF BEND SIZE 8 TO 16 INCH PIPE DIA WITH ONE COAT RED OXIDE RATE PER NOS
100
-
-
ERECTION ,FITTING AND WELDING OF BEND ,WITH ONE COAT RED OXIDE ,,SIZE - 18'' TO 30'' PIPE DIA, RATE - PER NOS
50
-
-
ERECTION ,FITTING AND WELDING OF BEND ,WITH ONE COAT RED OXIDE ,, SIZE - 32'' TO 44'' PIPE DIA, RATE - PER NOS ERECTION ,FITTING AND WELDING OF BEND ,WITH ONE COAT RED OXIDE ,, SIZE - 32'' TO 44'' PIPE DIA, RATE - PER NOS
50
-
-
FABRICATION AND ERECTION OF FLANGE 2" TO 6" WITH ONE COAT RED OXIDE ,
200
-
-
FABRICATION AND ERECTION OF FLANGE 8" TO 18" ,WITH ONE COAT RED OXIDE ,
1
-
-
FABRICATION AND ERECTION OF FLANGE 20" TO 30" ,WITH ONE COAT RED OXIDE ,
100
-
-
FABRICATION AND ERECTION OF FLANGE 32" TO 44" ,WITH ONE COAT RED OXIDE
100
-
-
FABRICATION , ERECTION & FITTING AT POSITION OF MENSURATION JUICE BOX BY M.S. PLATE & M.S. PIPE AS PER EXISTING JUICE BOX ,WITH ONE COAT RED OXIDE , . RATE PER NOS
4
-
-
FABRICATION ERRECTION OF MS STEEL STRUCTURE ( BEAM,CHANEL,ANGLE ,HAND RAILING PIPE,CHEQUIRED PLATE,MS PLATE ETC),WITH ONE COAT RED OXIDE , RATE - PER TON
15
-
-
FABRICATION ERECTION /REPLACEMENT OF UPPER HALF CASING OF - ID/FD/S.A. FAN . BY MS PLATE,STEEL STRUCTURE ETC,WITH ONE COAT RED OXIDE ,. ,RATE - PER NOS
4
-
-
FABRICATION ERECTION /REPLACEMENT OF LOWER HALF CASING OF - ID/FD/S.A. FAN . BY MS PLATE,STEEL STRUCTURE ETC ,WITH ONE COAT RED OXIDE ,. ,RATE - PER NOS
4
-
-
DISMENTLING OF SULPHITED JUICE, CATHER ., SIZE- OD 630 MM X HEIGHT 1060 MM. ,RATE - PER CATCHER./NO
1
-
-
FITTING OF SULPHITED JUICE, CATHER ., SIZE- OD 630 MM X HEIGHT 1060 MM. ,RATE - PER CATCHER./NO
1
-
-
FABRICATION AND ERECTION OF SULPHITED JUICE, CATHER BY M.S. PLATE AS PER EXISTING CATCHER., SIZE- OD 630 MM X HEIGHT 1060 MM.,WITH ONE COAT RED OXIDE , ,RATE - PER CATCHER./NO
1
-
-
M.S. PLATE FOR STACKER (AS PER SAMPLE)
1
-
-
FITTING OF AMMONIA COIL OF JUICE HEATER (COIL PIPE DIA- 2.5" ) RATE - PER COIL. / NOS
1
-
-
FABRICATION AND ERECTION OF AMMONIA COIL OF JUICE HEATER (COIL PIPE DIA- 2.5" ). AS PER EXISTING WORN OUT AMMONIA GAS COIL .,WITH ONE COAT RED OXIDE , RATE - PER COIL./NO
6
-
-
DISMENTLING OF CIRCULAR AMMONIA COIL OF VAPOUR CELL, SEMIKESTNER, ALL PAN, AND ALL QUAD BODY ., RATE - PER COIL. /NOS
6
-
-
FITTING OF CIRCULAR AMMONIA COIL OF VAPOUR CELL, SEMIKESTNER, ALL PAN, AND ALL QUAD BODY ., RATE - PER COIL. /NOS
6
-
-
FABRICATION AND ERECTION OF CIRCULAR AMMONIA COIL OF VAPOUR CELL, SEMIKESTNER, ALL PAN, AND ALL QUAD BODY AS PER EXISTING AMONIACOIL .,WITH ONE COAT RED OXIDE ,, RATE - PER COIL. /NOS FABRICATION AND ERECTION OF CIRCULAR AMMONIA COIL OF VAPOUR CELL, SEMIKESTNER, ALL PAN, AND ALL QUAD BODY AS PER EXISTING AMONIACOIL .,WITH ONE COAT RED OXIDE ,, RATE - PER COIL. /NOS
6
-
-
DISMENTLING OF WATER WASHING COIL OF ALL EVAPORATOR/ALL PAN. RATE SHOULD BE PROVIDED PER BODY./NOS
5
-
-
FITTING OF WATER WASHING COIL OF ALL EVAPORATOR/ALL PAN. RATE SHOULD BE PROVIDED PER BODY./NOS
5
-
-
FABRICATION AND ERECTION/REPLACEMENT OF WATER WASHING COIL OF ALL EVAPORATOR/ ALL PAN. AS PER EXISTING WATER WASHING COIL.,WITH ONE COAT RED OXIDE ,. RATE SHOULD BE PROVIDED PER BODY./NOS
5
-
-
DISMENTLING OF WORN OUT STEAM WASHING COIL OF ALL PAN. RATE SHOULD BE PROVIDED PER COIL. /NOS
5
-
-
FITTING OF WORN OUT STEAM WASHING COIL OF ALL PAN. RATE SHOULD BE PROVIDED PER COIL. /NOS
5
-
-
FABRICATION AND ERECTION OF WORN OUT STEAM WASHING COIL OF ALL PAN. AS PER EXISTING STEAM WASHING COI ,,WITH ONE COAT RED OXIDE , RATE SHOULD BE PROVIDED PER COIL. /NOS
6
-
-
FITTING/INSTALATION COMMISSIONING AND TRIAL OF PNEUMATIC CYLINDER WITH VALVE AND ALL ARRENGEMENT(,FABRICATION,ERECTION IF REQUIRED).SIZE - CYLINDER DIA - 300 MM RATE SHOULD BE PROVIDE PER PNEUMATIC CYLINDER WITH VALVE./NOS
10
-
-
FITTING/INSTALATION COMMISSIONING AND TRIAL OF PNEUMATIC CYLINDER WITH VALVE AND ALL ARRENGEMENT (,FABRICATION,ERECTION IF REQUIRED).SIZE - CYLINDER DIA - 200 MM RATE SHOULD BE PROVIDE PER PNEUMATIC CYLINDER WITH VALVE./NOS
10
-
-
FABRICATION AND ERECTION /REPLACEMENT OF SCRUBBER OF SULPHER FURNACE BY M.S. PLATE OR M.S.PIPE AS PER EXISTING SCRUBBER.,WITH ONE COAT RED OXIDE , RATE PER SCRUBBER/NOS
4
-
-
DISMENTLING OF SULPHER MELTER OF SULPHER FURNACE, RATE PER MELTER / NOS.
4
-
-
FABRICATION AND ERECTION OF SULPHER MELTER OF SULPHER PHURNACE ,AS PER EXISTING MELTER BY M.S. PLATE OR MS PIPE .,WITH ONE COAT RED OXIDE , RATE PER MELTER./NOS
4
-
-
DISMENTLING OF JUICE COIL OF DORR.MS COIL SIZE-4" AND OVER FLOW CLEAR JUICE MS PIPE SIZE-3" RATE PER COIL OF 3 NOS (PER COMPARTMENT 1 SET) / NOS.
6
-
-
FITTING OF JUICE COIL OF DORR.MS COIL SIZE-4" AND OVER FLOW CLEAR JUICE MS PIPE SIZE-3". . RATE PER COIL OF 3 NOS (PER COMPARTMENT 1 SET) / NOS.
6
-
-
FABRICATION AND ERECTION /REPLACEMENT OF JUICE COIL WITH NIPPLE AND REDUCER OF DORR.MS COIL SIZE-4" AND OVER FLOW CLEAR JUICE MS PIPE SIZE-3" AS PER EXISTING COIL.,WITH ONE COAT RED OXIDE , RATE PER COIL OF 3 NOS (PER COMPARTMENT 1 SET) / NOS.
6
-
-
DISMENTLING OF TOP COVER PLATE OF DORR (CAPACITY - 400 HL) . RATE PER TON .
5
-
-
FABRICATION AND ERECTION OF TOP COVER PLATE OF DORR (CAPACITY - 400 HL) AS PER EXISTING COVER PLATE BY 10 MM, 8 MM, MS PLATE AND STEEL STRUCTURE ETC. ,WITH ONE COAT RED OXIDE ,RATE PER TON .
5
-
-
DISMENTLING OF STEEL STRUCTURE (ANGLE,CHANEL,BEAM,PLATE ETC),RATE - PER TON
7
-
-
DISMENTLING OF PIPE STRUCTURE ,RATE - PER TON
7
-
-
DISMENTLING OF JUICE SULPHITER ARM.RATE - ALL ARM ONE SET/NO.
1
-
-
FABRICATION AND ERECTION OF STEEL STRUCTURE ARM OF JUICE SULPHITER AS PER EXISTING ARM WITH TRAIL.,WITH ONE COAT RED OXIDE , RATE - ALL ARM ONE SET/NO.
1
-
-
DISMENTLING OF PIPE CYCLONE. RATE - PER CYCLON/NOS
2
-
-
FABRICATION AND ERECTION OF PIPE CYCLONE BY 2 MM, M.S.SHEET , AS PER EXISTING CYCLONE RATE - ,WITH ONE COAT RED OXIDE , PER CYCLON/NOS
2
-
-
DISMENTLING OF SULPHITED JUICE TANK.SIZE - OD-2500 MM X HEIGHT 3200 MM, OF MS PLATE 8 MM THICK .RATE - PER TANK/NOS
2
-
-
FABRICATION AND ERECTION OF SULPHITED JUICE TANK OD-2500 MM X HEIGHT 3200 MM, BY- 8 MM M.S. PLAT AS EXISTING TANK ,WITH ONE COAT RED OXIDE ,.RATE - PER TANK/NOS
2
-
-
DISMENTLING OF QUAD STEAM CONDENSATE RECEIVING TANK. TANK SIZE- OD 920 X HEIGHT 940 , MS PLATE THICKNES 10MM , RATE - PER TANK/NOS
4
-
-
FABRICATION AND ERECTION OF QUAD STEAM CONDENSATE RECEIVING TANK . AS PER EXISTING CONDENSATE RECEIVING TANK ,TANK SIZE- OD 920 X HEIGHT 940 ,MS PLATE THICKNES - 10 MM,,WITH ONE COAT RED OXIDE ,RATE - PER TANK/NOS.
4
-
-
DISMENTLING OF SEMIKESTNER / VAPOUR CELL / JUICE HEATER CONDENSATE RECEIVING TANK, TANK SIZE- OD 920 X HEIGHT 1880 MM,PLATE THICKNESS - 10 MM. RATE - PER TANK/NOS.
4
-
-
FABRICATION AND ERECTION OF SEMIKESTNER / VAPOUR CELL/ JUICE HEATER CONDENSATE RECEIVING TANK ,AS PER EXISTING TANK, SIZE- OD 920 X HEIGHT 1880 MM.MS PLATE THICK - 10 MM,,WITH ONE COAT RED OXIDE , RATE - PER TANK/NOS
4
-
-
FABRICATION OF RAPID MOTOR COVERING GUARD BY M.S. ANGLE, MS SHEET ,WITH ONE COAT RED OXIDE ,RATE PER COVERING GUARD/NOS. MOTOR SIZE - 5 HP TO 30 HP
50
-
-
FABRICATION OF RAPID MOTOR COVERING GUARD BY M.S. ANGLE, MS SHEET ,WITH ONE COAT RED OXIDE , RATE PER COVERING GUARD/NOS. MOTOR SIZE - 30 HP TO 75 HP
50
-
-
FABRICATION OF RAPID MOTOR COVERING GUARD BY M.S. ANGLE, MS SHEET ,WITH ONE COAT RED OXIDE , RATE PER COVERING GUARD/NOS. MOTOR SIZE - 80 HP TO 200 KW
50
-
-
FABRICATION OF MILL ROLLER JUICE COLLER AS PER EXISTING JUICE COLLOR BY M.S. PLATE - 8 MM ,WITH ONE COAT RED OXIDE , RATE PER COLLER./NOS
8
-
-
FABRICATION ERECTION, MOTOR AND PUMP BED ,MOTOR SIZE - 5 HP TO 50 HP ,WITH ONE COAT RED OXIDE ,, RATE PER BED/NOS.
8
-
-
FABRICATION ERECTION, MOTOR AND PUMP BED ,MOTOR SIZE - 60 HP TO 200 KW, ,WITH ONE COAT RED OXIDE , RATE - PER BED/NOS.
8
-
-
REPLACEMENT OF SLUICE VALVE ( DISMANTLING & FITTING) SIZE- 2" TO 6" RATE PER VALVE. / NOS
40
-
-
REPLACEMENT OF SLUICE (VALVE DISMANTLING & FITTING) SIZE- 8" TO 18" RATE PER VALVE./ NOS
40
-
-
REPLACEMENT OF SLUICE (VALVE DISMANTLING & FITTING) SIZE- 20" TO 40" RATE PER VALVE./ NOS
20
-
-
REPLACEMENT OF IBR VALVE (VALVE DISMANTLING & FITTING) SIZE-1/2" TO 4" RATE PER VALVE./ NOS
20
-
-
REPLACEMENT OF IBR VALVE (VALVE DISMANTLING & FITTING) SIZE-6" TO1 4" RATE PER VALVE./ NOS
20
-
-
REPLACEMENT OF IBR CONTROL VALVE ,WATER AND STEAM LINE (VALVE DISMANTLING & FITTING) SIZE-4" TO12" RATE PER VALVE./ NOS
5
-
-
DISMENTLING OF WORN OUT MS BEND PLATE AND STEEL STRUCTURE ARM OF ALL TYPE OF PAN CRYSTLIZER. .BEND PLATE SIZE- LENGTH - 15 MTR,WIDTH - 150 MM,THICKNESS OF PLATE - 20 MM . RATE - PER MTR BEND PLATE./MTR
30
-
-
FABRICATION,BENDING AND ERECTION OF WORN OUT MS BEND PLATE AND STEEL STRUCTURE ARM OF ALL TYPE OF PAN CRYSTLIZER. AS PER EXISTING, WITH TRIAL, BEND PLATE SIZE- LENGTH - 15 MTR,WIDTH - 150 MM,THICKNESS OF PLATE - 20 MM .,WITH ONE COAT RED OXIDE , RATE - PER MTR BEND PLATE./MTR
30
-
-
DISMENTLING OF VACCUMM BOTTLE OF OLIVER SIZE- DIA - 680 MM X HIGHT - 2950 MM,PLATE THICK - 10 MM ,WITH CONOCAL AND CYLINDRICAL SAPE,AS PER EXISTING BOTTLE,RATE - PER BOTTLE / NOS
2
-
-
DISMENTLING OF VACCUMM BOTTLE OF OLIVER SIZE- DIA - 680 MM X HIGHT - 2950 MM,PLATE THICK - 10 MM ,WITH CONOCAL AND CYLINDRICAL SAPE,AS PER EXISTING BOTTLE,RATE - PER BOTTLE / NOS
2
-
-
FARICATION AND ERECTION OF VACCUMM BOTTLE OF OLIVER SIZE- DIA - 680 MM X HIGHT - 2950 MM,PLATE THICK - 10 MM ,WITH CONOCAL AND CYLINDRICAL SAPE,AS PER EXISTING BOTTLE,,WITH ONE COAT RED OXIDE ,RATE - PER BOTTLE / NOS
2
-
-
DISMENTLING OF VACCUMM BOTTLE OF OLIVER SIZE- DIA - 500 MM X HIGHT - 1800 MM,PLATE THICK - 10 MM ,WITH CONOCAL AND CYLINDRICAL SAPE,AS PER EXISTING BOTTLE,RATE - PER BOTTLE / NOS
2
-
-
FARICATION AND ERECTION OF VACCUMM BOTTLE OF OLIVER SIZE- DIA - 500 MM X HIGHT - 1800 MM,PLATE THICK - 10 MM ,WITH CONOCAL AND CYLINDRICAL SAPE,AS PER EXISTING BOTTLE ,WITH ONE COAT RED OXIDE ,,RATE - PER BOTTLE / NOS
2
-
-
FABRICATION/ERECTION/REPARING OF WORN OUT PORTION OF SHAVE ALL OF PAN, EVAPORATOR. AS PER EXISITING BY M.S. PLATE WITH TRAIL.,WITH ONE COAT RED OXIDE , RATE PER SHAVE ALL.
8
-
-
REPLACEMENT AND EXPANDATION OF SS TUBE OF QUAD , VAPOURCELL, SEMIKESTNER, JUICE HEATER AND PAN , AS PER EXISTING TUBE .WITH HYDRAULICALLY TRAIL/TESTING AT 7 Kg/CM2 ALSO. RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
400
-
-
FABRICATION AND ERECTION OF JUICE BOX OF DOUBLE BEAT VALVE OF JUICE HEATER BY 8 MM / 10 MM M.S. PLATE AS PER EXISTING BOX. SIZE- WIDTH- 710 MM X LENGTH 600 MM X 130 MM DEPTH.,WITH ONE COAT RED OXIDE , RATE - PER BOX/NOS .
8
-
-
DISMENTLING & FABRICATION/ERECTION OF INSPECTION BOX/ MANHOLE UP TO 2 SQUARE FEET DIA AS PER EXISTING MANHOLE WITH COVER. RATE - PER MANHOLE /NOS.
8
-
-
FABRICATION ERECTION OF PIPE STRUCTURE,,WITH ONE COAT RED OXIDE , RATE - PER TON
20
-
-
FABRICATION AND ERECTION OF MUD SCRAPER OF DORR BY MS ROD,PLATE ETC.ASPER EXISTING.
100
-
-
DISMENTLING OF WATER DRAIN GUTTER FROM UP TO 15 MTR HIGHT, - RATE PER MT.
10
-
-
FABRICATION OF WATER DRAIN GUTTER ,WITH ONE COAT RED OXIDE, RATE PER MT. AS PER EXISTING
200
-
-
ERECTION FITTING AND WELDING OF WATER DRAIN GUTTER UP TO 15 MTR HIGHT, - RATE PER MT.
10
-
-
FABRICATION AND ERECTION OF PLATFORM FOR BATCH TYPE CENTRIFUGAL MACHINE BY MS ANGLE,CHANEL,BEAM,PLATE,CHEQUIRED PLATE AND HAND RAILING ETC AS PER DRAWING/AS PER INSTRUCTION BY ENGINEER,MACHINE MAKE - THYSSENKRUPP,CAPACITY - 1250 KG/CHARGE,. RATE - PER MT
5
-
-
DISMENTLING OF EXISTING PROFILE SHEET ,THICK OF PROFILE SHEET - 0.5 MM RATE - PER SQUIRE MTRE.
1000
-
-
PROFILE SHEETING WORK WITH MATERIAL ,THICK OF PROFILE SHEET - 0.5 MM, MAKE - APOLO ROOF TUFF/TATA , RATE - PER SQUIRE MTRE.
1000
-
-
DISMENTLING O F CEMENT SHEET, RATE - PER SQUIRE MTR.
1000
-
-
CEMENT SHEETING WORK WITH MATERIAL (WITH DISMENTLING OF EXISTING SHEET),MAKE- ACC/EVEREST , RATE - PER SQUIRE MTR.
500
-
-
SUPPLY AND FITTING OF CHIMNEY LIGHTING,WITH CABLE AS PER EXISTING ,RATE - PER NOS
4
-
-
SUPPLY AND FITTING OF PVC WALL PANNEL AS PER INSTRUCTION,WITH ALL ACCESSORIES,AND ALL MATERIAL SUPER HEAVY ,RATE - PER SQUARE FEET
1000
-
-
SUPPLY AND FITTING OF PVC FALL CEILING, ,AS PER INSTRUCTION,WITH ALL ACCESSORIES,AND ALL MATERIAL SUPER HEAVY ,RATE - PER SQUARE FEET
1000
-
-
PROVIDING ,MAKING AND FITTING OF DECORATIVE TABLE , (SIDE WORK) ,AS PER INSTRUCTION,MAKING BY CENTURY PLY,GRADE-710 ,MIN.THICKNES OF PLY - 11/4'' ,WITH ALL ACCESSORIES,AND ALL MATERIAL. ,RATE - PER SQUARE FEET
300
-
-
PROVIDING ,MAKING AND FITTING OF DECORATIVE SIDR TABLE (SIDE WORK) ,AS PER INSTRUCTION,MAKING BY CENTURY PLY,GRADE-710 ,MIN.THICKNES OF PLY - 11/4'' ,WITH ALL ACCESSORIES,AND ALL MATERIAL. ,RATE - PER SQUARE FEET
300
-
-
SUPPLY AND FITTING OF ALLUMINIUM,PLY AND GLASS,FOR CABING (WITH MATERIAL,GLASS , PLY AND ALL MATERIAL, THICKNESS OF PLY AND GLASS - 8 MM ) ,RATE - PER SQUIRE FEET.
1000
-
-
FABRICATION OF M S RAKE FOR RAKE ELEVATOR, BAGASSE ELEVATOR,MBC,RBC AS PER DRAWING/AS PER EXISTING.
50
-
-
RECTIFICATION OF DUST CATCHER TANK BY S.S./M.S. PLATE & PIPE THICKNESS - 2MM AS PER EXISTING
1
-
-
OIL SEAL 22X63X9 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
4
-
-
OIL SEAL 26X50X10 9 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
SPARE KIT 3TF 55 MAKE - SIEMENS
3
-
-
SPARE KIT 3TF 56 MAKE - SIEMENS
3
-
-
SPARE KIT 3TF 46 MAKE - SIEMENS
3
-
-
SPARE KIT MNX 95 MAKE - L&T/SCHNEIDER
10
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 8 X 100 MM MAKE- STANDARD QUALITY
12
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 10 X 100 MM MAKE- STANDARD QUALITY
12
-
-
M.S. BOLT WITH NUT FULL THREAD - 18 X 50 MM MAKE - STANDARD QUALITY
150
-
-
M.S. BOLT WITH NUT FULL THREAD - 18 X 65 MM MAKE - STANDARD QUALITY
160
-
-
M.S. BOLT WITH NUT FULL THREAD - 18 X 100 MM MAKE - STANDARD QUALITY
125
-
-
M.S. BOLT WITH NUT FULL THREAD - 18 X 150 MM MAKE - STANDARD QUALITY
140
-
-
M.S. BOLT WITH NUT FULL THREAD - 16 X 100 MM MAKE - STANDARD QUALITY
150
-
-
M.S. BOLT WITH NUT FULL THREAD - 16 X 150 MM MAKE - STANDARD QUALI
160
-
-
M.S. BOLT WITH NUT FULL THREAD - 10 X 25 MM MAKE - STANDARD QUALITY
125
-
-
M.S. BOLT WITH NUT FULL THREAD - 8 X 25 MM MAKE - STANDARD QUALITY
90
-
-
M.S. BOLT WITH NUT FULL THREAD - 8 X 30 MM MAKE - STANDARD QUALITY
100
-
-
M.S. BOLT WITH NUT FULL THREAD - 6 X 30 MM MAKE - STANDARD QUALITY
160
-
-
M.S. BOLT WITH NUT FULL THREAD - 10 X 75 MM MAKE - STANDARD QUALITY
140
-
-
M.S. BOLT WITH NUT FULL THREAD - 10 X 100 MM MAKE - STANDARD QUALITY
80
-
-
M.S. BOLT WITH NUT FULL THREAD - 12 X 100 MM MAKE - STANDARD QUALITY
150
-
-
M.S. BOLT WITH NUT FULL THREAD - 16 X 75 MM MAKE - STANDARD QUALITY
160
-
-
M.S. BOLT WITH NUT FULL THREAD - 18 X 75 MM MAKE - STANDARD QUALITY
125
-
-
M.S. BOLT WITH NUT FULL THREAD - 18 X 40 MM MAKE - STANDARD QUALITY
80
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 16 X 70 MM MAKE - STANDARD QUALITY
90
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 12 X 70 MM MAKE - STANDARD QUALITY
100
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 18 X 100 MM MAKE - STANDARD QUALITY
120
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 10 X 75 MM MAKE - STANDARD QUALITY
130
-
-
M.S. BOLT WITH NUT HALF THREAD - 3/8" X 1 ½" MAKE - STANDARD QUALITY
50
-
-
M.S. BOLT WITH NUT HALF THREAD - 7/8" X 3" MAKE - STANDARD QUALITY
50
-
-
M.S. BOLT HALF THREAD- 20 X 65 MM MAKE - STANDARD QUALITY
50.8
-
-
M.S. STUD BOLT (TWO SIDE THREAD) - 12.5 X 65 MM MAKE - STANDARD QUALITY
80
-
-
M.S. BOLT WITH NUT HALF THREAD - 1/2"X 2" MAKE - STANDARD QUALITY
135
-
-
RETRO FITTING OF AIR CIRCUIT BREAKER MODEL-TYPE - WL 5000 AMPERE, MAKE - SIEMENS. DISTRIBUTER CERTIFICATE FROM PURCHASE FIRM AND PURCHASE INVOICE OR MATERICAL PURCHAE CERTIFICATE, WITH INSTALLATION & TRAIL COMPLETE WORKS
1
-
-
OIL SEAL - 450 X 350 X 50 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
5
-
-
OIL SEAL - 38 X 48 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL - 40 X 55 X 9 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
13
-
-
OIL SEAL - 42 X 52 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
15
-
-
OIL SEAL - 88.9 X 114.6 X 12.6 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
OIL SEAL - 85 X 110 X 13 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
9
-
-
OIL SEAL - 240 X 270 X 15 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
8
-
-
OIL SEAL - 76.2 X 95.25 X 9.52 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
OIL SEAL - 30 X 55 X 7 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
40
-
-
OIL SEAL - 35 X 60 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
OIL SEAL - 35 X 48 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
OIL SEAL - 120 X 140 X 13 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
30
-
-
OIL SEAL - 54 X 72 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
OIL SEAL - 54 X 22 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL - 150 X 350 X 50 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
2
-
-
OIL SEAL - 42 X 53 X 9 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
9
-
-
OIL SEAL - 85 X 110 X 15 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL - 45 X 40 X 10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
5
-
-
OIL SEAL - 45 X 65 X 12 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
OIL SEAL - 45 X 62 X 8 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
2
-
-
OIL SEAL - 100X130X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
15
-
-
OIL SEAL - 40 X 50 X 60 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL - 47 X 72 X 10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
10
-
-
OIL SEAL - 50 X 100 X 50 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
2
-
-
DISMANTLING & ERECTION OF NEW FABRICATED SECONDARY SUPERHEATER COILS OF 65 T.P.H. BOILER, AS PER DRAWING NUMBER BAA- 2660 MAKE – LIPI BOILERS LTD, PUNE ELIGIBILITY CRITERIA OF CONTRACTOR FOR JOB WORK: - (CLASS -1 IBR LICENSE CONTRACTOR WHO HAS WORKED OF IBR PRESSURE PART .
WORK TERMS & CONDITIONS: -
01. ALL PERMISSION ,APPROVAL ,FORMALITIES OF IBR AND SUBMISSION OF CERTIFICATE WILL BE SCOP OF CONTRACTOR .
02. ALL RADIOGRAPHY TEST, BOILER INSPECTOR GROUND INSPECTION & HYDRAULIC TEST AND APPROVAL OF CHIEF INSPECTOR OF BOILERS CHHATTISGARH,WILL BE SCOPE OF SUPPLIER /CONTRACTOR .
03. FACTORY WILL DEPOSITED STATUTORY CHALLAN FEES OF INSPECTION,AND WILL BE DEDUCTED IN RUNNING BILL OF CONTRACTOR/SUPPLIER. 04. WORK AS PER IBR ACT.AND NORMS ,AND AS PER INSTRUCTION OF CHIEF ENGINEER/BOILER INSPECTOR.
05. WORK WILL BE COMPLETEDIN THE SCHEDULE TIME (GIVEN BY CHIEF ENGINEER)
06. ALL TOOL AND TACKELS ie- HYDRA,CRANR,WELDING MACHINE,WELDING CABLE.CUTTING SET,SAFETEY ITEM ARE IN SCOPE OF CONTRACTOR.
07. ALL CONSUMABLES TO EXECUTE THE JOB/ WORK,ie - GAS,WELDING ELECTRODE etc. WILL BE CONTRACTOR SCOPE. 08. IN THE CASE OF ANY CSUALTY/ ACCIDENT FACTORY MANAGEMENT WILL NOT BE RESPONSIBAL, ALL RESPOSIBLE OF CONTRACTOR.
1
-
-
M.S. BOLT WITH NUT 16 X 75 MM, STANDARD QUALITY
100
-
-
FITTING OF M.S. PIPE LINE 8" TO 12" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH. FITTING OF M.S. PIPE LINE 8" TO 12" RATE SHOULD BE PROVIDE IN PER INCH DIA PER METER LENGTH.
200
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-100, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-120, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-150, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-120, RPM-600, ROTOR, INSULATION-F. . TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
SERVICEING AND OVERHOULING OF FIBRIZER MOTOR. DETAIL- 3 PHASE SQ. SLIPRING INDUCTION H.T. MOTOR. KW/HP-500/670, VOLT - 11000, MAKE- CROMPTON GREAVES LTD. MAKE - CROMPTON GREAVES LTD.
2
-
-
AMC SERVICEING OF HIGH MAST LIGHT - HIGHT OF LIGHT POST - 35 METER SERVICING OF COMPLETE LIGHTING ASSEMBLY PULL DOWN OPERATING MECHANISM SET INCLUDING STEEL WIRE ROPE GEARBOX DISMENTLING AND RE ERECTION OF COMPLETE LIGHTING ASSEMBLY BY CRANE IF REQUIRED,NUMBER OF 400 WATT LIGHT FITTING - 24 NOS EACH MAST ,FACTORY WILL BE PROVIDED ONLY 400 WATT FLOOD LIGHT,OTHER MATERIAL ie OPERATING MECHANISM SET INCLUDING STEEL WIRE ROPE GEARBOX ,HANDLE ETC. WILL BE SUPPLIED BY PARTY .
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-120, RPM-1000, ROTOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-200, RPM-738, STATOR, INSULATION-F TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-268, RPM-2900, STATOR, INSULATION-F TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-177, RPM-1000, STATOR, INSULATION -F TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-177, RPM-1000, ROTOR, INSULATION-F TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
SERVICEING OF MILL HYDRAULIC ACCUMULATOR CYLINDER AND FILLING OF GAS AS PER REQUIREMENT ,WITH TESTING AND TRIAL MAKE - MALIK/HIGH FLOW
9
-
-
"MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP- 0.5, (THRUSTOR MOTOR) TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
AMC FOR SERVICING AND TRAIL OF AIR COMPRESSOR (BOILER) MODEL - 2545, MAKE - IR
1
-
-
"EXHAUST FAN REWINDING, REPAIRING AND MAINTENANCE, 12" RPM-900 TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE EXHAUST FAN REWINDING, REPAIRING AND MAINTENANCE, 18"" RPM-900 TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"""SUBMERSIBLE PUMP REPAIRING AND MAINTENANCE, 03 TO 05 H.P, RPM- 2900 TERMS & CONDITIONS 1 - REPLACEMENT BUSHING AND IPMLLOR AS PER REQUIREMETN 2- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - VARUNA"
1
-
-
"SUBMERSIBLE MOTOR REWINDING, AND MAINTENANCE, 03 TO 05 H.P, RPM- 2900"SUBMERSIBLE MOTOR REWINDING, AND MAINTENANCE, 03 TO 05 H.P, RPM- 2900 TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"SUBMERSIBLE PUMP REPAIRING AND MAINTENANCE, 7.5 TO 10 H.P, RPM- 2900 TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
AMC FOR SERVICING AND TRAIL OF AIR COMPRESSOR (BOILER/CF) MODEL - 2340, MAKE - IR
3
-
-
AMC FOR SERVICING AND TRAIL OF AIR BLOWERS-B/H FOR SO2 FURNACE , CAP. -600 M3/HR, HP- 40, MODEL- SRO69, MAKE - KPT BLOWER
2
-
-
AMC FOR SERVICING AND TRAIL OF AIR COMPRESSOR ,MODEL - D-72IN-A NL MAKE - IR
1
-
-
PCC 02 MAIN BUSBAR MODIFICATION WORK INLCUDING BUS BAR BENDING , CUTTING & DRILLING AS PER REQUIREMENT ETC.
1
-
-
PCC 01 ,ACB 1600 AMP FITTING AND TRAIL BUSBAR MODIFICATION WORK INLCUDING BUS BAR BENDING , CUTTING & DRILLING AS PER REQUIREMENT ETC.
1
-
-
AMC FOR SERVICING AND TRAIL OF AIR COMPRESSOR (BLOWER/ETP) MODEL - 78, CAPACITY- 1200 M3/HR, WITH TRIAL. MAKE - EVEREST
1
-
-
C/F MACHINE ,ACB 1600 AMP FITTING AND TRAIL BUSBAR MODIFICATION WORK INLCUDING BUS BAR BENDING , CUTTING & DRILLING AS PER REQUIREMENT ETC.
1
-
-
INSULATION WITH ALUMINIUM CLADDING HAVING THICKNESS OF INSULATION LRB 50 MM,BEFOR INSULATION CLEAN THE SURFACE PROPERLY, REMOVE DUST,OIL ARE ANY OTHER FOREIGN MATERIAL WHERE EVER REQUIRED, DENSITY OF LRB MATTRES 100 KG / M3, WITH WIRE NETTING 24 X 3" STITCHED WITH LACING WIRE 20 SWG & FILLING ALL THE JOINTS WITH LOOSE GLASS WOOL, PROVIDING AND FIXING OF PLAIN ALUMINIUM SHEET HAVE THICKNESS 24 SWG WITH HELP OF SELF TAPPING SCREW AND GROOVED, ALL JOINTS ARE WATER PROOF. INSULATION CLADDING GUARANTEE MINIMUM ONE YEAR.
1000
-
-
INSULATION WITH ALUMINIUM CLADDING HAVING THICKNESS OF INSULATION LRB 75 MM,BEFOR INSULATION CLEAN THE SURFACE PROPERLY, REMOVE DUST,OIL ARE ANY OTHER FOREIGN MATERIAL WHERE EVER REQUIRED, DENSITY OF LRB MATTRES 100 KG / M3, WITH WIRE NETTING 24 X 3" STITCHED WITH LACING WIRE 20SWG & FILLING ALL THE JOINTS WITH LOOSE GLASS WOOL, PROVIDING AND FIXING OF PLAIN ALUMINIUM SHEET HAVE THICKNESS 24 SWG WITH HELP OF SELF TAPPING SCREW AND GROOVED, ALL JOINTS ARE WATER PROOF. INSULATION CLADDING GUARANTEE MINIMUM ONE YEAR
1000
-
-
SERVICING, TESTING AND PERFORMANCE TRIAL OF 185 KW CANE CUTTER MOTORS
1
-
-
SERVICING, TESTING AND PERFORMANCE TRIAL OF 90 KW CANE CHOPPER MOTORS
1
-
-
SERVICING TESTING AND TRAIL OF CANE UNLOADER HYDRAULIC GRAV PUMP ,CAP - 5 MT ,
2
-
-
OLIVER SERVICING AND MAINTENANCE,WITH TRAIL AND TESTING,DISMENTLING OF ALL PP GRILL ,CHANGED PP GRILL WHERE EVER REQUIRED AND REFITTINF AS PER EXISTING, MAKE - MULTITECH/UTTAM/
1
-
-
SERVICING AND , SS TUBE REPLACEMENT OF WATER RADIATOR FOR FIBRIZER MOTOR DETAIL- 3 PHASE SQ. SLIPRING INDUCTION H.T. MOTOR. KW/HP-500/670, VOLT - 11000, FRAME UWR500E. EACH SET TWO SERVICING AND , SS TUBE REPLACEMENT OF WATER RADIATOR FOR FIBRIZER MOTOR DETAIL- 3 PHASE SQ. SLIPRING INDUCTION H.T. MOTOR. KW/HP-500/670, VOLT - 11000, FRAME UWR500E. EACH SET TWO PEACES MAKE - CROMPTON GREAVES LTD.
2
-
-
SERVICING, REPAIRING AND TESTING OF CANE HANDLING PANEL
1
-
-
AMC FOR SERVICING AND TRAIL OF WEIGH BRIDGE WITH MATERIAL ,BRIDGE CAPACITY - 60 MT, MAKE - JYOTI
1
-
-
AMC FOR SERVICING AND TRAIL OF WEIGH BRIDGE WITH MATERIAL ,BRIDGE CAPACITY - 40 MT, MAKE - JYOTI
2
-
-
SERVICING, REPAIRING AND TESTING OF 375 KW DC MILL MOTORS
4
-
-
SERVICING, REPAIRING AND TESTING OF 90 KW JUICE SCREEN PUMP MOTORS
2
-
-
SERVICING, REPAIRING AND TESTING OF 22 KW ,IRC MOTORS
3
-
-
SERVICING, REPAIRING AND TESTING OF 160 KW ,ID FAN MOTORS
2
-
-
SERVICING, REPAIRING AND TESTING OF 110 KW ,FD FAN MOTORS
2
-
-
SERVICING, REPAIRING AND TESTING OF 90 KW ,SA MOTORS
2
-
-
BALANCING OF CANE CHOPPER ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
SERVICING, REPAIRING AND TESTING OF 200 KW ,FEED WATER MOTORS
2
-
-
BALANCING OF CANE LEVELLER ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
SERVICING, REPAIRING AND TESTING ALL EARTHINGS
17
-
-
SHUTTER REPAIRING WORK AS PER EXISTING WITH MATERIAL FITTING SERVICING & TRIAL WITH ONE YEAR WARRENTY
1
-
-
BALANCING OF FIBRIZER ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
BALANCING OF I.D. FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
2
-
-
BALANCING OF F.D. FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
BALANCING OF S.A. FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
2
-
-
DISMENTLING OF MILL ROLLER WITH HYDRAULIC CYLINDER,BEARING , TAIL BAR AND TAIL BAR COUPLING ETC. RATE - PER ROLLER.
1
-
-
DISMENTLING OF MILL ROLLER WITH HYDRAULIC CYLINDER,BEARING , TAIL BAR AND TAIL BAR COUPLING ETC. RATE - PER ROLLER.
1
-
-
DISMENTLING OF DONALY CHUTE WITH MESRATION BOX, ETC. RATE - PER CHUTE.
1
-
-
BALANCING OF HOT AIR BLOWER FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
DISMANTELING AND REPLACEMENT OF FIBRIZER HAMMERS
1
-
-
BALANCING OF COLD AIR BLOWER FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
DISMENTLING, FITTING & ALIGNMENT OF HOPPER ECCENTRIC SHAFT & CONNECTING SHAFT
3
-
-
BALANCING OF DUST CATCHER BLOWER FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
BALANCING OF A- C/F MACHINE ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
3
-
-
BALANCING OF B - C/F MACHINE ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
3
-
-
BALANCING OF C C/F MACHINE ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
3
-
-
BALANCING OF MILL DC MOTOR BLOWER FAN ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
4
-
-
COMPLETE RE- ALIGNMENT IN X & Y DIRECTION OF MILL,SIZE - 33''X 66'', MAKE- UTTAM, REMOVING OF HEADSTOCK CHECKING OF BED . REMOVING FOUNDATION BOLTS CHECKING BY ULTRA SONIC TEST .PROVIDING STOPPER TO BOTH SIDE OF HEADSTOCK ,FOR MILL NO. 1,2,3 AND 4. NECESSARY TOOLS & TACKLES SUCH AS BOX TYPE STRAIGHT EDGE ACCURATE MASTER LEVEL TRANSPARENT WATER LEVELS,UT MACHINE ETC. IN SOPE OF COTRACTOR. MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
4
-
-
ULTRA SONIC TEST MILL ROLLERS SHAFT ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
15
-
-
BELT JOINTING WORK WITH CHEMICAL & PEST, BELT WIDTH - 600 MM , RATE- PER JOINT / NOS
1
-
-
ULTRA SONIC TEST CANE CARRIER SHAFT ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
2
-
-
BELT JOINTING WORK WITH CHEMICAL & PEST, BELT WIDTH - 1500 MM, RATE- PER JOINT / NOS
1
-
-
ULTRA SONIC TEST FD + ID + SA FAN+RBC+MBC+BAGASSE ELEVATOR SHAFT ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
11
-
-
COMPELTE RETUBING (SS TUBE) FOR WATER RADIATOR FOR D.C. SHUNT MOTOR DETAIL- KW - 375, RPM- 1000-1200, FRAME 1L WC 355L, RADIATOR TYPE- CACW, HEAT LOAD- 60 KW, TEST PRESSURE - 10 BAR. EACH SET 04 PEACES AS PER EXISTING
1
-
-
ULTRA SONIC TEST OF UNDER FEED ROLLER SHAFT ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
4
-
-
MPI TESTING OF FIBRIZER HUB ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
MPI TESTING OF LEVELVER HUB ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
MPI TESTING OF CUTTER HUB ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
MPI TESTING OF CROWN PINION ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
20
-
-
MPI TESTING OF MILL COUPLING ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
8
-
-
MPI TESTING OF TRANSMISSION PINION & GEAR ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
4
-
-
MPI TESTING OF MILL HEAD STOCK ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
4
-
-
MPI TESTING OF MILL TAIL BAR ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
4
-
-
ALL TYPE WELDING JOINT DP TESTING TECH RATE SHOULD PER JOINT MAKE - CONSTANT DYNAMIC/UTTAM
1
-
-
BOILER & ECONOMISSOR, SUPER HEATER TUBE THICKNESS TESTING COMPLETE JOB - BOILER TUBE THICKNESS TESTING FROM APPROVED I.B.R AGENCY AS INDIAN BOILER ACT BOILER CAPACITY - 65 TON/LTR WORKING PRESSURE - 67 KG/CM2 HEATING SURFACE - 2872 M2 BOILER & ECONOMISSER THICKNESS TESTING ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORYTECH
1
-
-
THICNESS TESTING OF BOILER FEED TANK ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORYTECH
2
-
-
THICNESS TESTING OF PAN BODIES ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORYTECH
5
-
-
THICNESS TESTING OF QUAD BODY, SEMIKESTNER BODY ETC. ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
7
-
-
THICNESS TESTING OF CLARIFIER BODY ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
THICNESS TESTING OF INJECTION COMMON HEADER ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
1
-
-
THICNESS TESTING OF B&C VACUM CRYSTLIZER ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
3
-
-
THICNESS TESTING OF MOLLASES STORAGE TANK ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY
2
-
-
RETRO FITTING OF AIR CIRCUIT BREAKER MODAL - TYPE - WL 4000 AMPER WITH ETU TESTING BY SIEMENS ENGINEER TEAM MAKE - SIEMENS
1
-
-
THICKNESS TESTING OF EXHAUST & VAPOUR PIPE LINE ,MINIMUM WORK EXPERIENCE 5 YEAR IN SUGAR FACTORY / DNS ENGINEERING SERVICEES
1
-
-
SERVICE OVERHOULING FOR D.C. SHUNT MOTOR DETAIL- KW - 160, RPM- 1000-1200, FRAME 1L WC 355L, RADIATOR TYPE- CACW, HEAT LOAD- 60 KW, MAKE- INTEGRATED ELECTRIC CO. / MYSORE ENGINEERING ENTERPRISES MAKE - INTEGRATED ELECTRIC CO.
3
-
-
ONE TIME SERVICING OF AIR CIRCUIT BREAKER WITH EUT TESTING MODULE -32T8, IN - 1600A UC- 5000V ICU - 66KA ELECTRONIC RELAY - ETU2W FIXED TYPE MAKE - SIEMENS
1
-
-
MILL DRIVE DC SHUNT MOTOR 375 KW OVERHOULING SERVICING, VARNISHING, CUMMUTATOR, GROOVING & ASSMEBLING COMPLETE JOB.THROUGH SERVICE ENGINEER. MAKE - INTEGRATED ELECTRIC CO.
4
-
-
ONE TIME SERVICING OF AIR CIRCUIT BREAKER WITH EUT TESTING MODULE -32T8, IN - 2000A UC- 5000V ICU - 66KA ELECTRONIC RELAY - ETU2W FIXED TYPE MAKE - SIEMENS
2
-
-
SERVICING, REPAIRING AND MAINTENANCE OF SULPHURE FURNACE (CASTABLE/BRICK WORK)
3
-
-
ONE TIME SERVICING OF AIR CIRCUIT BREAKER WITH EUT TESTING MODULE -32T8, IN - 1250A UC- 5000V ICU - 66KA ELECTRONIC RELAY - ETU2W FIXED TYPE MAKE - SIEMENS
3
-
-
SERVICING, REPAIRING AND MAINTENANCE OF BOILER FURNACE (CASTABLE/BRICK WORK)
1
-
-
ONE TIME SERVICING OF AIR CIRCUIT BREAKER WITH EUT TESTING MODULE -32T8, IN - 1000A UC- 5000V ICU - 66KA ELECTRONIC RELAY - ETU2W FIXED TYPE MAKE - SIEMENS
7
-
-
CLEANING AND WASHING OF COMPLETE MILL HOUSE FROM FIBRISER TO BAGASSE ELEVATOR AFTER COMPLETION OF CRUSHING SEASON
1
-
-
INTERNAL & EXTERNAL CLEANING OF BOILER AREA AFTER CRUSING SEASON,
1
-
-
CHEVERON CUTTING OF MILL ROLLER
8
-
-
DISMANTELING AND REPLACEMENT OF LEVELLOR KNIVES
1
-
-
DISMANTELING AND REPLACEMENT OF CHOPPER KNIVES
1
-
-
DISMANTELING AND REPLACEMENT OF FIBRIZER HAMMER
1
-
-
DISMENTLING OF ESP COLLECTING PLATE AS PER EXISTING PLATE ,ESP MAKE - UNICORN,BOILER CAPACITY - 65 TON ,RATE - PER NOS
1
-
-
FITTING/ERECTION,WELDING AS PER EXISTING PLATE WITH TRIAL AND TESTING OF ESP COLLECTING PLATE ,ESP MAKE - UNICORN,BOILER CAPACITY - 65 TON,TESTED AT 150 MG ,RATE - PER NOS
1
-
-
AMC SERVICEING OF ESP , ESP MAKE - UNICORN,BOILER CAPACITY - 65 TON , - ELECTRICAL /MECHANICAL ,REPARING WITH TRIAL AND TESTED AT 150 M.,RATE - PER SEASON /NOS.
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-0.5, RPM- 1450/1000, STATOR , INSULATION-B TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-1.0-3, RPM- 1450/1000, STATOR, INSULATION- B. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-5-7.5, RPM- 1450/1000, STATOR, INSULATION- B. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-10-15, RPM- 1450/1000, STATOR, INSULATION- B. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-12.5, RPM-2900, STATOR, INSULATIO-B TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-20, RPM- 1450/1000, STATOR, INSULATION-F TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-25, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-30,RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-40,RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-50, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-60, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
"3 PHASE SQ. CAGE MOTOR REWINDING, REPAIRING AND MAINTENANCE, HP-75, RPM-1450/1000, STATOR, INSULATION-F. TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - MERATHAN/SEIMENS/ABB"
1
-
-
WATER PROOF FILM FACE RED SHUTTERING PLY WOOD ,SIZE - THICK - 12 MM,L-2400 MM,W - 1200 MM (30 KG),MAKE - KANGARU/CENTURY/TYCOON
10
-
-
CHASSIS - 5 INCH,'C' CHANNEL HEAVY DTY FRAME,TYPE - TILTING TYPE,MIXTURE DRUM CAPACITY- 200 LTR ,GUARANTEE - 1 YEARMAKE - RISHABH
1
-
-
ELECTRIC CONCRETE NIDDLE VIBRATOR GVC 20,PLASTIC-35 MM,GUARANTEE - 1 YEAR,MAKE -BOSCH,
1
-
-
PETROL CONCRETE VIBRATORDF1 GX 80 -40 MM,GUARANTEE - 1 YEAR,MAKE -HONDA
1
-
-
AUTO LEVEL MACHINE ,USES APPLICATION - SURVEY,MATERIAL - S.S,MINIMUM FOCUS - 20 CM,PROTECTION - IPX 6,ACCURACY - 2.00 MM,WITH STAND, LEVELING STAFF- 4 MTR,TRYPOD AND ALL ACCESSORIES ,MAKE SOKKIA,BOSCH
1
-
-
TAGADI FOR CIVIL WORK(ZINCRO ROUND SHAPE),SIZE-18'',THICK- 1.5 MM,MAKE - STANDARD QUALITY
50
-
-
TAGAD FOR CIVIL WORK (ZINCRO ROUND SHAPE),SIZE-14'',THICK- 1.5 MM,MAKE - STANDARD QUALITY
50
-
-
FAWDA WITH WOODEN HANDLE FOR CIVIL WORK ,SIZE-12'',THICK- 3 MM,MAKE - STANDARD QUALITY
30
-
-
BELCHA WITH HANDLE FOR CIVIL WORK ,THICK- 3 MM,MAKE - STANDARD QUALITY
30
-
-
KARANI WITH HANDLE FOR CIVIL WORK,SIZE- L-15CM,W-15 CM - HANDLE- 13 CM ,THICK- 1 MM,MAKE - STANDARD QUALITY
30
-
-
CIVIL RCC FOUNDATION ( ALL CIVIL WORK) WITH MATERIAL( ie - STONE CHIPS,BOLDER,TMT BAR,SAND Etc.) OF COOLINT TOWER - 550 CMH , AS PER DRAWING NO -DPE/CI/FD/01
1
-
-
CIVIL RCC FOUNDATION ( ALL CIVIL WORK) WITH MATERIAL( ie - STONE CHIPS,BOLDER,TMT BAR,SAND Etc.) OF INDUSTRIAL RO PLANT CAPACITY- 30000 LTR/HR. AS PER DRAWING NO -DPE/CI/GA/01
1
-
-
OIL SEAL 100X130X19 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
6
-
-
M.S. SHORT BEND 'C' CLASS- 2" THICKNESS OF BEND - 4.5 MM STANDARD QUALITY
1
-
-
OIL SEAL - 70 X 50 X 10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
12
-
-
AMC, SERVICING OF MILL JUICE PUMP DRIVE PANEL ABB TYPE- ACS-VFD. SERVICE WITH TRAIL. MAKE - ABB/SEIMENS/MITSUBISHI
1
-
-
FABRICATION,BENDING AND ERECTION OF WORN OUT MS BEND PLATE AND STEEL STRUCTURE ARM OF ALL TYPE OF PAN CRYSTLIZER. .AS PER EXISTING, WITH TRIAL, BEND PLATE SIZE- LENGTH - 15 MTR,WIDTH - 150 MM,THICKNESS OF PLATE - 20 MM .,WITH ONE COAT RED OXIDE , RATE - PER MTR BEND PLATE./MTR
1
-
-
EXTRA FOR LAYING PCC/RCC OF ANY GRADE IN SUPER STRUCTURE ABOVE PLINTH LEVEL FOR EVERY FLOOR OR PART THEREOF IN ADDITION TO RATE FOR FOUNDATION AND PLINTH FROM PLINTH TO 4.50M LEVEL
450
-
-
EXTRA FOR LAYING PCC/RCC OF ANY GRADE IN SUPER STRUCTURE ABOVE PLINTH LEVEL FOR EVERY FLOOR OR PART THEREOF IN ADDITION TO RATE FOR FOUNDATION AND PLINTH FROM 4.50M TO 9.00 M LEVEL
500
-
-
EXTRA FOR LAYING PCC/RCC OF ANY GRADE IN SUPER STRUCTURE ABOVE PLINTH LEVEL FOR EVERY FLOOR OR PART THEREOF IN ADDITION TO RATE FOR FOUNDATION AND PLINTH FROM FROM 9.00 M LEVEL TO TOP
450
-
-
PROVIDING AND LAYING DAMP PROOF COURSE (UPTO 50 MM THICK) WITH PLAIN CEMENT CONCRETE 1:2:4 (1 CEMENT : 2 COARSE SAND : 4 GRADED CRUSHED STONE AGGREGATE 20 MM NOMINAL SIZE) INCLUDING FORMWORK
500
-
-
APPLYING A COAT OF HOT BITUMEN 30/40 USING @1.7KG/SQM ON DAMP PROOF COURSE AFTER CLEANING THE SURFACE WITH BRUSHES AND FINALLY WITH A PIECE OF CLOTH LIGHTLY SOAKED IN KEROSENE OIL
450
-
-
BRICK WORK WITH MODULAR FLY ASH LIME BRICKS (FALG BRICKS) CONFIRMING TO IS:12894-2002 OF CLASS DESIGNATION 40 IN FOUNDATION AND PLINTH IN CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND) EXTRA FOR BRICK WORK IN SUPERSTRUCTURE ABOVE FROM PLINTH TO 4.50 M LEVEL
400
-
-
EXTRA FOR WORKING HEIGHT ABOVE 6 METER FOR FIXING GI /PROFILE/PVC/POLYCARBONATE SHEET FOR EVERY ADDITIONAL HIGHT OF 1 METER OF PART THEREOF.
500
-
-
BRICK WORK WITH MODULAR FLY ASH LIME BRICKS (FALG BRICKS) CONFIRMING TO IS:12894-2002 OF CLASS DESIGNATION 40 IN FOUNDATION AND PLINTH IN CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND) EXTRA FOR BRICK WORK IN SUPERSTRUCTURE ABOVE FROM 4.50 M TO 9.00 M LEVEL
500
-
-
BRICK WORK WITH MODULAR FLY ASH LIME BRICKS (FALG BRICKS) CONFIRMING TO IS:12894-2002 OF CLASS DESIGNATION 40 IN FOUNDATION AND PLINTH IN CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND) EXTRA FOR BRICK WORK IN SUPERSTRUCTURE ABOVE 9.00 M LEVEL TO TOP
400
-
-
SUPPLYING AND FIXING ROLLING SHUTTERS OF APPROVED MAKE, MADE OF REQUIRED SIZE M.S. LATHS, INTERLOCKED TOGETHER THROUGH THEIR ENTIRE LENGTH AND JOINTED TOGETHER AT THE END BY END LOCKS, MOUNTED ON SPECIALLY DESIGNED PIPE SHAFT WITH BRACKETS, SIDE GUIDES AND ARRANGEMENTS FOR INSIDE AND OUTSIDE LOCKING WITH PUSH AND PULL OPERATION COMPLETE, INCLUDING THE COST OF PROVIDING AND FIXING NECESSARY 27.5 CM LONG WIRE SPRINGS MANUFACTURED FROM HIGH TENSILE STEEL WIRE OF ADEQUATE STRENGHT CONFORMING TO IS:4454 PART 1 AND M.S. TOP COVER OF REQUIRED THICKNESS FOR ROLLING SHUTTERS 80 X 1.20 MM M.S. LATHS
500
-
-
SUPPLYING AND FIXING ROLLING SHUTTERS OF APPROVED MAKE, MADE OF REQUIRED SIZE M.S. LATHS, INTERLOCKED TOGETHER THROUGH THEIR ENTIRE LENGTH AND JOINTED TOGETHER AT THE END BY END LOCKS, MOUNTED ON SPECIALLY DESIGNED PIPE SHAFT WITH BRACKETS, SIDE GUIDES AND ARRANGEMENTS FOR INSIDE AND OUTSIDE LOCKING WITH PUSH AND PULL OPERATION COMPLETE, INCLUDING THE COST OF PROVIDING AND FIXING M.S SHEET TOP COVER FOR ROLLING SHUTTERS 1.20 MM THICK
500
-
-
PROVIDING & FIXING PRECOATED GALVANISED STEEL SHEET ROOFING ACCESSORIES 0.50 MM +/- 5% TOTAL COATED THICKNESS(TCT) ZINC COATING 120GSM AS PER IS:277 IN 240MPA STEEL GREAD 5-7 MICRONS EPOXY PRIMER ON BOTH SIDE OF THE SHEET & POLYESTER TOP COAT 15-18 MICRONS USING SELF DRILING TAPPING SCREWS OF WITH POLYMER COATED J OF L HOOKS, BOLT & NUTS AND G.I. SEAM BOLTS & NUTS, G.I. PLAIN AND BITUMEN WASHERS COMPLET. RIDGES PLAIN (500-600MM)
400
-
-
PROVIDING AND LAYING NOMINAL MIX CEMENT CONCRETE WITH CRUSHED STONE AGGREGATE USING CONCRETE MIXER IN FOUNDATION PLINTH AND AT GROUND LEVEL EXCLUDING COST OF FORM WORK 1:1-1/2:3 (1 CEMENT : 1-1/2 COARSE SAND : 3 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE)
400
-
-
PROVIDING AND LAYING NOMINAL MIX CEMENT CONCRETE WITH CRUSHED STONE AGGREGATE USING CONCRETE MIXER IN FOUNDATION PLINTH AND AT GROUND LEVEL EXCLUDING COST OF FORM WORK 1:1-1/2:3 (1 CEMENT : 1-1/2 COARSE SAND : 3 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE)
500
-
-
PROVIDING AND MIXING WATER PROOFING MATERIAL IN PCC/RCC WORK IN PROPORTION RECOMMENDED BY THE MANUFACTURER
500
-
-
PROVIDING AND MIXING WATER PROOFING MATERIAL IN PCC/RCC WORK IN PROPORTION RECOMMENDED BY THE MANUFACTURER
500
-
-
PAINTING ON NEW WORK (TWO OR MORE COATS) TO GIVE AN EVEN SHADE WITH SATIN SYNTHETIC ENAMEL PAINT
400
-
-
APPLYING ONE COAT OF CEMENT PRIMER ON WALL SURFACE (APPLIED @ 0.80 LITERS/10 SQM) COMPLETE
500
-
-
STEEL WORK WELDED IN BUILD UP SECTIONS/FRAMED WORK INCLUDING CUTTING HOISTING,FIXING IN POSITION AND APPLYING A PRIMING COAT RED OXIDE ZINC CHORMATE PRIMER. IN GRATINGS, FRAMES, GUARD BAR, LADDER, RAILINGS, BRACKETS, GATES AND SIMILER WORK.
450
-
-
STEEL STRUCTURE PAINTING BY RED OXIDE/ALUMINIUM PAINT/ANY OTHER PAINT OF COLUMN, SHADE, ETC. (RATE SHOULD BE PER STEEL STRUCTURE TONE)
450
-
-
Detailed Survey of existing road including chaining, laveling, with intervals and closing survey each days work,
fixing bench marks, painting, taking triel pits and submission of road
, cross section, L-section, quantity statement and details of all cross
drainage works in computerized prints in five copies in paper files
and all type of compliance required by the Engineer-in-charge
5000
-
-
Scarifying existing bituminous surface to a depth of 50 mm (scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead up to 1000 meters) as per clause 305.4.3
35000
-
-
Excavation in soil (by Mechanical Means.) Excavation for roadway in soil using mechinical means including in tipper for carring of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300
5000
-
-
Construction of embankment with Material Obtained from borrow (Construction of embankment with approved material/selected soil having C.B.R.5 (unless specified otherwise in the contact) obtained from borrow pits with all lifts and leads, transporting to site, spreding, grading to required slope and compacting to meet requirement of table 300-2 )
15000
-
-
Construction of sub-grade with material Obtained from Borrow ( construction of sub grade with approved material/selected soil having C.B.R.8 ( unless specified otherwise in the contract ) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2)
10000
-
-
Construction of Embankment with Material Deposited from (Construction of embankment with approved materials having C.B.R.5 (unless specified otherwise in the contract) deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)
15000
-
-
Granular Sub-base as per Table :- 400-1 Construction of granular carriage of mixed Material to work site, spreading in uniform layers with motor grader on (b) For Sub-base cum drainage layer or upper sub-base with - (i) Grading III Material prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desied density. complete as per clause 401. A. Plant mix Method (with Mechanically crushed stone only)(a) For Lower Sub-base (i) with Grading V Material
10000
-
-
Wet Mix Macadam (providing , laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in machanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/ base course on well prepared surface and compacting with vibratory roller to archive the desired density as per clause 406 )
10000
-
-
Prime Coat (Providing and applying primer coat with oil based (SS-1, grade confirming to IS:8887) on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per clause 502. (i) on WBM /WMM surface @0.85 kg/sqm.
30000
-
-
Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS:8887 ) using emulsion pressure distributer on the prepared bituminious/granular surface cleaned with mechanical broom and as per clause 503. (i) Bituminous surface @ 0.25 kg/Sqm
30000
-
-
Dence Bituminous Macadam (Providing and laying dence bituminous HMP using crushed aggregates of specified grading, premised with bituminous binder @4.0 to 4.5% by weight ot total mix of mix and filler, transporting the hot mix to work site, laying with a hydrosite paver finisher to the required grade, lavel and alignment, rolling with smooth wheeles, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects ) (A) with Machanical Paver grade II (26.5 mm Normal 4.5 %
1200
-
-
Bituminous concrete (Providing and lying bituminous soncrete with hot mix plant using crushed aggregates of specified grading , premixed with bituminous binder @ 5.0 to 6.0% by weight of total mix of mix and filler, transporting the hot mix to work site, lying with a hydrostatic paver finisher with sensor control to the required grade, lavel and alignment, rolling with smooth wheeled, vibratory and tandom rollers to archive the desired compaction as per MORTH specification clause No. 507 complete in all respects) (A) With Mechanical Paver (grade II ) 13.2 mm size 6 %
900
-
-
Construction of Shoulders (Construction of shoulders as per clause with selected soil from borrow pits/ borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25 % and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting watering rolling and royality charges etc. complete (A) With vibratory roller.
4000
-
-
Construction of RCC open drain (ii) Construction of RCC open drain 0.60m x 0.60 m inside dimension lined with 120 mm thick RCC M-20 walls, 120 mm thick CC M-20 foundation, over 100 mm thick (Av) leveling course in PCC M-15 including excavation, dressing of sides and bottom, provision of HYSD rainforcement consisting 8 mm dia horizontal bars @ 150mm c/c and L-shaped 8 mm dia vertical bars @ 150mm c/c (L= 800 mm) including cutting , bening and binding wire, placing in position providing shuttering and concreting by using concrete mixer, compaction by vibration etc. complete as per drawing and technical specifications.
1000
-
-
(ii) Construction of RCC drain/chamber covor, placing in position providing, shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and techniacal specifications excluding rainforcement. With RCC M-20
200
-
-
CUTTING AMD DISMENTLING OF BOTTOM SHELL OF QUAD BODY FOR TUBE REPLACEMENT
1
-
-
FITTING AND WELDING OF BOTTOM SHELL OF QUAD BODY
1
-
-
SUBMERSIBLE MOTOR REWINDING, AND MAINTENANCE, 03 TO 05 H.P, RPM- 2900" TERMS & CONDITIONS 1-REPLACEMENT BUSING AND BEARING ON REQUARE .2- MOTOR FINALIZE AFTER LOAD TRIAL . 3- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 4- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - VARUNA
1
-
-
"SUBMERSIBLE MOTOR REWINDING, AND MAINTENANCE, 7.5 TO 10 H.P, RPM- 2900" TERMS & CONDITIONS 1-SUPER ENAMIL COPPER WIRE MUST TO BE STANDARD QUALITY. 2- INSULATING PAPER TAPE & VARNISH (DR BACK) STANDARD QUALITY. 3- MOTOR TERMINAL LEAD MUST BE GLASS BRAIDED WIRE WITH PROPERLY GLASS TAPING & WINDING .4- OLD SCRAP MATERIAL REVINDER PROPERTY 5- MOTOR FINALIZE AFTER LOAD TRIAL . 6- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 7- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - varuna
1
-
-
"SUBMERSIBLE MOTER REPAIRING AND MAINTENANCE, 7.5 TO 10 H.P, RPM- 2900 " TERMS & CONDITIONS 1-REPLACEMENT BUSING AND BEARING ON REQUARE 2.MOTOR FINALIZE AFTER LOAD TRIAL . 3- MOTOR BEARING / BUSHESH REPLACEMENT PERIOR INSTRUCTION APPROVAL 4- ONE CRUSHING SEASON UNDER GUARANTEE/ WARANTEE MOTOR MAKE - VARUNA
1
-
-
GROUTING (INCLUDING SHUTTRING)WITH MATERIAL,CEMENT,SAND,BLAST ETC. AFTER COMPLETION OF WORK CONTRACTOR WILL BE SUBMITTED MEASUREMENT BOOK DULY CHECKED AND VERYFIED BY AT LEAST SUB ENGINEER OF PWD OR RES
100
-
-
POCKET FIXING AND REMOVING ABOVE - 150 X 150 X 500 DEPTH WITH MATERIAL,CEMENT,SAND,BLAST,CENTRING PLATE ETC. AFTER COMPLETION OF WORK CONTRACTOR WILL BE SUBMITTED MEASUREMENT BOOK DULY CHECKED AND VERYFIED BY AT LEAST SUB ENGINEER OF PWD OR RES
100
-
-
"DISMANTLING & ERECTION OF NEW FABRICATED PRIMARY SUPERHEATER COILS OF 65 T.P.H. BOILER, AS PER DRAWING NUMBER BAA- 2660 "DISMANTLING & ERECTION OF NEW FABRICATED PRIMARY SUPERHEATER COILS OF 65 T.P.H. BOILER, AS PER DRAWING NUMBER BAA- 2658 MAKE – LIPI BOILERS LTD, PUNE ELIGIBILITY CRITERIA OF CONTRACTOR FOR JOB WORK: - (CLASS -1 IBR LICENSE CONTRACTOR WHO HAS WORKED OF IBR PRESSURE PART . WORK TERMS & CONDITIONS: - 01. ALL PERMISSION ,APPROVAL ,FORMALITIES OF IBR AND SUBMISSION OF CERTIFICATE WILL BE SCOP OF CONTRACTOR . 02. ALL RADIOGRAPHY TEST, BOILER INSPECTOR GROUND INSPECTION & HYDRAULIC TEST AND APPROVAL OF CHIEF INSPECTOR OF BOILERS CHHATTISGARH,WILL BE SCOPE OF SUPPLIER /CONTRACTOR . 03. FACTORY WILL DEPOSITED STATUTORY CHALLAN FEES OF INSPECTION,AND WILL BE DEDUCTED IN RUNNING BILL OF CONTRACTOR/SUPPLIER. 04. WORK AS PER IBR ACT.AND NORMS ,AND AS PER INSTRUCTION OF CHIEF ENGINEER/BOILER INSPECTOR. 05. WORK WILL BE COMPLETEDIN THE SCHEDULE TIME (GIVEN BY CHIEF ENGINEER) 06. ALL TOOL AND TACKELS ie- HYDRA,CRANR,WELDING MACHINE,WELDING CABLE.CUTTING SET,SAFETEY ITEM ARE IN SCOPE OF CONTRACTOR. 07. ALL CONSUMABLES TO EXECUTE THE JOB/ WORK,ie - GAS,WELDING ELECTRODE etc. WILL BE CONTRACTOR SCOPE. 08. IN THE CASE OF ANY CSUALTY/ ACCIDENT FACTORY MANAGEMENT WILL NOT BE RESPONSIBAL, ALL RESPOSIBLE OF CONTRACTOR."
1
-
-
"DISMANTLING & ERECTION OF NEW FABRICATED ECONOMISER COILS OF 65 T.P.H. BOILER, AS PER DRAWING NUMBER BAA- 2650 "DISMANTLING & ERECTION OF NEW FABRICATED ECONOMISER COILS OF 65 T.P.H. BOILER, AS PER DRAWING NUMBER BAA- 2650 MAKE – LIPI BOILERS LTD, PUNE ELIGIBILITY CRITERIA OF CONTRACTOR FOR JOB WORK: - (CLASS -1 IBR LICENSE CONTRACTOR WHO HAS WORKED OF IBR PRESSURE PART . WORK TERMS & CONDITIONS: - 01. ALL PERMISSION ,APPROVAL ,FORMALITIES OF IBR AND SUBMISSION OF CERTIFICATE WILL BE SCOP OF CONTRACTOR . 02. ALL RADIOGRAPHY TEST, BOILER INSPECTOR GROUND INSPECTION & HYDRAULIC TEST AND APPROVAL OF CHIEF INSPECTOR OF BOILERS CHHATTISGARH,WILL BE SCOPE OF SUPPLIER /CONTRACTOR . 03. FACTORY WILL DEPOSITED STATUTORY CHALLAN FEES OF INSPECTION,AND WILL BE DEDUCTED IN RUNNING BILL OF CONTRACTOR/SUPPLIER. 04. WORK AS PER IBR ACT.AND NORMS ,AND AS PER INSTRUCTION OF CHIEF ENGINEER/BOILER INSPECTOR. 05. WORK WILL BE COMPLETEDIN THE SCHEDULE TIME (GIVEN BY CHIEF ENGINEER) 06. ALL TOOL AND TACKELS ie- HYDRA,CRANR,WELDING MACHINE,WELDING CABLE.CUTTING SET,SAFETEY ITEM ARE IN SCOPE OF CONTRACTOR. 07. ALL CONSUMABLES TO EXECUTE THE JOB/ WORK,ie - GAS,WELDING ELECTRODE etc. WILL BE CONTRACTOR SCOPE. 08. IN THE CASE OF ANY CSUALTY/ ACCIDENT FACTORY MANAGEMENT WILL NOT BE RESPONSIBAL, ALL RESPOSIBLE OF CONTRACTOR."
1
-
-
OIL SEAL 51X85X10 MICODA MAKE RAJHANS/NILKAMAL/SUPER GOLD
24
-
-
M.S. SHORT BEND C-CLASS 4'' MAKE-STANDARD QUALITY
18
-
-
M.S. SHORT BEND C-CLASS 6'' THICKNESS OF BEND - 4.8 MM MAKE-STANDARD QUALITY
6
-
-
M.S. SHORT BEND C-CLASS 8'' THICKNESS OF BEND - 6 MM MAKE-STANDARD QUALITY
1
-
-
M.S. Short Bend C-CLASS 5'' MAKE-STANDARD QUALITY
3
-
-
M.S. Short Bend C-CLASS 3'' THICKNESS OF BEND - 4.8 MM MAKE-STANDARD QUALITY
9
-
-
M.S. Short Bend C-CLASS 1'' THICKNESS OF BEND - 4 MM MAKE-STANDARD QUALITY
1
-
-
M.S. WASHER & PLAIN 5/8" (14MM) MAKE - STANDARD QUALITY
25
-
-
M.S. washer 7/8" MAKE - STANDARD QUALITY
25
-
-
M.S. BOLT WITH NUT 3/4" x 6" (H.T )MAKE - STANDARD QUALITY
50
-
-
M.S. Bolt with nut 12 x 50 mm MAKE - STANDARD QUALITY
50
-
-
M.S. NUT BOLT WITH 4 WASHER 3/4"X3" MAKE - STANDARD QUALITY
330.68
-
-
M.S. BOLT WITH NUT HALF THREAD 3/8" x 3" MAKE - STANDARD QUALITY
50
-
-
M.S. NUT BOLT 5/8"X2.5" WITH 4 WASHER MAKE - STANDARD QUALITY
461
-
-
M.S. Bolt With Nut 3/4" x 4" (H.T.) MAKE - STANDARD QUALITY
50
-
-
MONARCH BRASS SPRAY NOZZLE WITH M.S. SOCKET AS PER SAMPLE
200
-
-
Oil seal 30X47X7 MAKE- MICODA/RAJHANS/NILKAMAL/SUPER GOLD
49
-
-
Oil Seal 40X55X10 MAKE - MICODA/RAJHANS/NILKAMAL/SUPER GOLD
79
-
-
HAND STITCHING MACHINE Hand Portable stitching Machine Make- Stitch well/Stitch care
3
-
-
S.S. SCREEN FOR VACUEM FILTER 12X24" S.S Screen for vacuume filter Size-12 Inch X 24 Inch s.s perforated screen made off AISI quality for raotatory vacuume filter size-12 Inch X 24 Inch
Screen Specification
Size-3800 mm length X 510 mm width X 35 mm border
No. of Holes per Sq. Inch-600 no. Dia of holes- 0.05 mm
48
-
-
AMC OF CAPACITY 1000 M3/DAY FOR OPERATION OF ROUTINE PRECAUTIONARY MAINTENANCE OF EFFLUENT TREATMENT PLANT (ETP) Terms and Condition
A. COMPANY SHOULD TAKECARE COMPLIANCES OF ALL THE RULES & REGULATION UNDER ENVIRANMENT PROTECTION ACT, 1986, WATER ACT, 1974, AIR ACT, 1981 AND HWM RULES 2008, RELATED TO STATE POLLUTION CONTROL BOARD AS WELL AS CENTRAL POLLUTION CONTROL BOARD. B. COMPANY SHOULD HAVE ONE YEAR EXPRIENCE IN ETP OPERATION AND ONLINE MONITORING SYSTEM IN SUGAR FACTORY.
C. COMPANY WILL PROVIDE ETP INCHARGE, ETP OPERATORS HAVING MINIMUM ONE YEARS EXPERIENCE IN SAME FIELD.
D. OPERATION AND SUPERVISION WILL BE DONE BY YOU FOR THREE SHIFTS DURING OUR CRUSHING SEASON 2024-25.
E. YOUR JOB IS FOR CRUSHING SEASON ONLY (BEFORE ONE MONTH START OF PLANT & AFTER ONE MONTH OF CLOSING OF PLANT).
F. COMPANY SHOULD HAVE WORK EXPERIENCE OF AT LEAST ONE SUGAR MILLS.
G. COMPANY SHOULD HAVE EXPERIENCE OF INSTALLATION & MAINTANANCE OF ONLINE MONITORING SYSTEM.
H. COMPANY SHOULD MAINTAIN ALL THE PARAMETER PRESCRIBED BY C.P.C.B. /S.P.C.B
6
-
-
VACCUM FILTER OVERHOULING COMPLET REPAIRING WORK Vacuum Filter Repairing And Servicing Size 12 Feet X 24 Feet No of Screen 48 Nos Screen Size 3800 mm X 510 mm Terms & Condition :-
1- Replacing of All Screen
2- Checking & Cleaning of All P.P. Grills
3- Hydraulinc Of Capillary Tubes
4- Trail After Completed The Work
1
-
-
SULPHAR BHATTI REPAIRING WORK REPAIRING & MAINTENANCE Sulphur Brunner flim type(1 No.) & Batch Type.(02 No.) Terms & Condition :-
1- Replacing of All Valve & Pipe Line
2- Checking & Cleaning of All steam line & gas line
3- Hydraulinc testing of all line
4- Trail After Completed The Work
1
-
-
VACUUM FILTER 12 Inchx24 Inch Triunion Valve As Per Sample
1
-
-
LIME & SULPHURE GODOWN REPAIRING WORK Lime Godown Repairing & Reconctruction work , (RCC & Brick Wall Dismenteling, & Dismentel Material Shifting) Brick Work , Plaster, Concreting Work, Profile Sheet, Trush Work, & etc.
250
-
-
Pug Mill 1 No suitable for handling A amssecuite ( sp gravity 1.52),Pugmill Shape-U Type,InsideWidth- 1300mm, Length-2600MM,Shell-Material : MS, Thickness 6mm, End Plate-Material : MS, Thickness 10mm,Stirrer speed-not more than 5 t0 6 RPM,Stools details-Stool will be supplied in loose welded condition,Drive (Motor) Milltech Scope-1 No. of 3.7 KW Motor- ABB Make 1440 RPM,Pugmill Final Speed-5 to 6 RPM,Pugmill Support-Supplier scope,Painting-Suitable epoxy paint shall be applied from inside of the Pugmill & and support paint from outside,Shaft-Schedule80,Angle-Angle of Sirrer-75mmX75mmX10mm width 350mm-400mm,Stirrer Arms Clearance with
Shell-25mm-30mm,Driving Shaft-125mm-MS. EN8,Driver (Gear) /Rating-1 No of 3.7 Kw foot Mounting shaft driven in horizontal direction Gear Make Kavitsu/ 24 hours,Drive Support
1
-
-
M S Pipe C class - 150 NB X 6000 Long, 42 mtr
7
-
-
M S Pipe C class - 125 NB X 6000 Long, 30 mtr
5
-
-
M S Pipe C class - 100 NB X 6000 Long, 30 mtr
5
-
-
M S Pipe C class - 200 NB X 6000 Long, 24 mtr
4
-
-
M S Bend C class - 150 NB
12
-
-
M S Bend C class - 125 NB
12
-
-
M S Bend C class - 100 NB
16
-
-
M S Bend C class - 200 NB
6
-
-
M S C - Class 90° Elbow, 150 NB C-Class
6
-
-
M S C - Class 90° Elbow, 125 NB C-Class
6
-
-
M S C - Class 90° Elbow, 100 NB C-Class
8
-
-
M S Flanges D Table, 200 NB
4
-
-
M S Flanges D Table, 150 NB
11
-
-
M S Flanges D Table, 125 NB
2
-
-
M S Nut Bolt Flanges - 3/4" x 3"
130
-
-
M S Flanges D Table, 100 NB
2
-
-
Tube dismentling, Tube Fitting, Tube Expainding & Tube plate Repairing Work. (Replacement of Tube 300 M2 H.S Body) Tube dismentling, Tube Fitting, Tube Expainding & Tube plate Repairing Work. (Replacement of Tube 300 M2 H.S Body)
2
-
-
Stitching Head For Hand Portable stitching Machine Type/Make- Stitch well/Stitch care
2
-
-
Stitching Head For Stitching Machine Suitable for PP Bag Make- Stitch well/Stitch care
3
-
-
Bag Stitching Machine Suitable for PP Bag Make- Stitch well/Stitch care
3
-
-
Stitching Head For Stitching Machine Suitable for Jute Bag Make- Stitch well/Stitch care
3
-
-
Molten sulphur pumps
2
-
-
Air dryer Suitable for 300 M3/Hr And 1kg/cm2 presure
1
-
-
Air dryer Suitable for 600 M3/Hr And 1kg/cm2 presure
1
-
-
Pan Auto Feed Contral System(Micro Based)
5
-
-
M.S Fabricated Bend Size-450 mm , 90°
9
-
-
M.S Fabricated Rubber Sheated Valve(Straight) Size-450 mm
6
-
-
FRP Flange Size-6"
6
-
-
FRP Bend Size-6"
6
-
-
FRP Tee Size-6"
6
-
-
Diaphragm Rubbersheat Size-6"
12
-
-
FRP valve Size-6"
6
-
-
FRP 4 Way Crass 6"
6
-
-
AMC OF ONLINE MONITOTING SYSTEM INSTALLED AT EFFLUENT TREATMENT PLANT AND AIR POLLUTION CONTROL DEVICES Terms and Condition
A. COMPANY SHOULD TAKECARE COMPLIANCES OF ALL THE RULES & REGULATION UNDER ENVIRANMENT PROTECTION ACT, 1986, WATER ACT, 1974, AIR ACT, 1981 AND HWM RULES 2008, RELATED TO STATE POLLUTION CONTROL BOARD AS WELL AS CENTRAL POLLUTION CONTROL BOARD. B. COMPANY SHOULD HAVE ONE YEAR EXPRIENCE IN ETP OPERATION AND ONLINE MONITORING SYSTEM IN SUGAR FACTORY.
C. COMPANY WILL PROVIDE ETP INCHARGE, ETP OPERATORS HAVING MINIMUM ONE YEARS EXPERIENCE IN SAME FIELD.
D. OPERATION AND SUPERVISION WILL BE DONE BY YOU FOR THREE SHIFTS DURING OUR CRUSHING SEASON 2024-25.
E. YOUR JOB IS FOR CRUSHING SEASON ONLY (BEFORE ONE MONTH START OF PLANT & AFTER ONE MONTH OF CLOSING OF PLANT).
F. COMPANY SHOULD HAVE WORK EXPERIENCE OF AT LEAST ONE SUGAR MILLS.
G. COMPANY SHOULD HAVE EXPERIENCE OF INSTALLATION & MAINTANANCE OF ONLINE MONITORING SYSTEM.
H. COMPANY SHOULD MAINTAIN ALL THE PARAMETER PRESCRIBED BY C.P.C.B./S.P.C.B
6
-
-
FRP Pipe Dia Size - 6"
36
-
-
Spare Mesh for Virbo Screen with color Size 60 Mesh
2
-
-
Spare Mesh for Virbo Screen with color Size 80 Mesh
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements