Louh Purush Sardar Vallabhbhai Patel Sahkari Shakkar Karkhana Maryadit Tender

AMC of Sugar Bagging and stitching machine (Servicing must be done by authorised Service engineer) of Newlong/Hightech engineer/R.B tech./Adhiraj control system

Calibration work of magnetic water flow meter Make - Yokogawa, model AXF100G & Its transmitter model - AXFA14G at standard calibration laboratory (calibration certificate for One year validity to be provide after calibration) NABL/Yokogawa Approved.

Calibration work of yokogawa Make juice flow U type rotomass massflow converter/sensor (RCC539)and its rotamass massflow meter Make - YOKOGAWA range (0-190) TPH at standard calibration laboratory (calibration certificate for One year validity to be provide after calibration) NABL/Yokogawa Approved.

Compelete automation work & electronic circuit modification work of existing molasis weighing system with proper data storage & controlling unit (with 01 year service warrenty) Terms & Conditions 1. Service Provider should have minimum 3 Years experienc in similar nature of work. 2. Lodging and Boarding will be arranged by the service Provider. 3. They will be fully responsible for sefety Labour and tools, Tackle required related to job. 4. They will be registered under GST. 5. They will be submit deails of technical team related to job. 6. They will be taken maximum One Month period to do the job.

75 TPH high pressure boiler 87 kg/cm² pressure and 515° C temperature water panel, bank tube , primary & Secoundry superheater, economiser coil and air heater ultrasonic thickness testing JOB Work (ASNT Certification)

Dust collector air blower balacing work ISO Certified.

Bagasse blower Balancing work ISO Certified.

Gas Refilling work of 10 Ltr. Cylinder (Pure Nitrogen gas) (Authorised and 3 years similer work experience) For Hitech ESP Sox pollution Panel

Gas Refilling work of 10 Ltr. Calibration gas mixture cylinde (Carbon monoxide N2.5, Nitrogen N 5.0 & Carbon dioxide N5.0) (Authorised and 3 years similer work experience) For Hitech ESP Sox pollution Panel

Gas Refilling work of 10 Ltr. Calibration gas mixture cylinder (Oxygen- N4.0, Nitrogen N5.0) (Authorised and 3 years similer work experience) For Hitech ESP Sox pollution Panel

Gas Refilling Work of 10 Ltr. Gas mixture Cylinder (Nitrogen & Sulphur) (Authorised and 3 years similer work experience) For Hitech ESP Sox pollution Panel

On Line Tape Chenger (OLTC) Servicing Switch Yard

DG Set 750 KVA Make- Sterling Servicing

Heating Vantilation and Air Conditioning (HVAC) Maintenance and servicing work

AC Maintenance work 2 Ton

AC Maintenance work 4 Ton

AC Maintenance work 9 Ton

Mill roller arcing with standard Azucar 80 or high grade equivalent electrode for all mill rollers. ( Rate to be qnoted on per kg basis including consumable, machine, manpower) (Manufacturer/Authorized Dealer of Imco alloys)

Repairing, Fitting and site balancing of fibrizer ( to and fro charge included) Only Manufacturer Imco alloys.

Servicing, repairing & maintainace work of 04 Nos. Atlas Copco Air Compressors & 02 Nos. Atlas Air dryers (Atlas Copco Autorised) Per man days

Calibration work of yokogawa Juice flow mass flow meter & Yokogawa water magnetic flow meter at factory site, (Mandays) authorized by Yokogawa ( Calibration certificate valid for 01 year to be provided after calibration by yokogawa approved/Authorized)

Calibration work of 10 Nos. Siemens/Yokogawa flow transmitter, 05 Nos. Draft transmitter, 03 Nos. drum level transmitter at factory site ( Calibration certificate valid for 01 year to be provided after calibration by standard calibration laboratorty NABL authorized

AMC of Batch type machine UC- 1750 Make Uttam Industries (Minimum 3 years similer work experience)

AMC of UC- 1500 Continuous Centrifugal machine (Minimum 3 years similer work experience)

Replacment of thermax Make ESP's collecting plates and emitting electrodes with lower frame of second stage (outlet side). Erection and Commissioning work under contractor scope All materials related to ESP in contractor scope Consumbles will be provided by sugar plant (Oxygen/DA/LPG Welding consumble etc) All Safety Measure in contractors Scope (Authorised- Thermax Enviro.)

Lagging & Insulation with 100mm thick LRB mattress, All Materials will be in contractor scope All tools & manpower in contractor scope

Alluminum cladding - 24 gauge sheet All Materials will be in contractor scope All tools & manpower in contractor scope

DCS Upgredation work from existing window 7 ABB800xA5.1 to window 10 ABB800xA 6.1.1.1 Present System 1. Version- ABB800xA5.1, Upgrade System - ABB800xA 6.1.1.1 Present System 2. Work Stations windows OS- Windows 7, Upgrade System - Windows 10 Present System 3. Servers - 02 Nos, Upgrade System - 02 Nos Present System 4. Operating Stations - 04 Nos, Upgrade System - 04 Nos Present System 5. Monitors - 06 Nos, Upgrade System - 06 Nos Thay Should Provided Full Services Support for two year or 2 Crushing Season.

Compelete automation work & electronic circuit modification work of contineu emmission monitoring system (CEMS) with proper data storage and controling unit (with 01 year service warenty) 1. Service provider should have experience in similar of work . and service provider must performance certificate of similar work 2. Elctronic equipment, programmed controller and parts will be arranged by the service provider. 3. They will be fully responsible for safety of their own & their support staff 4. They will be registered under GST. 5. They will be submit details of technical team related to job. 6. They should complete the job before crushing season starts. 7. Thay Should Provided Full Services Support for two year or 2 Crushing Season.

Complete Automation work & electronic circuit modifacation work of existing lubrication system (Mill House) with proper data and controlling unit (with 01 year service warranty) Make- Elecon Peripherals Limited , type- LCPFORZ Pump FLs W.O. No.- 2158, Supply-415V load- 1.1KW. control- 220V sr. No. 2158/1, DRG No. - DF-2BB-2001-RO, PLC- Siemens type- LOGO- 230RC Model no.- DM8 230R Terms & Conditions 1) Service Provider should have experiance in similer of work and service provider must performence certificate of similar work. 2) Electronic equipment programmed controller & Parts will be arranged by the service provider. 3) They will be fully responsible for safety of their own & their support staff. 4) They will be registered under GST 5) They will be submit details of technicals team related to Job. 6) They should complete the job before crushing season starts. 7) They should provided full service support for two year or 2 Crushing season.