Indian Oil Corporation Limited Tender
... More
The IOCL has issued a formal invitation for competitive bids for the Indian Oil Corporation Limited project, for Combined Arc For Housekeeping Of Station, Civil, Mechanical, Electrical, T And I And Hse Maintenance For 02 Years At Serpl Raipur in Raipur, Chhattisgarh, with an estimated contract value of Rs. 11,17,272. The bid opening date for this tender is 16-01-2025 and the last date for bid submission is 30-01-2025. Interested bidders for Indian Oil Corporation Limited tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Costs
EMD
₹ 28,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Combined Arc For Housekeeping Of Station, Civil, Mechanical, Electrical, T And I And Hse Maintenance For 02 Years At Serpl Raipur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ERBBS_183200_1Bid Award Id
ViewTender No
SERPL/BBS/TS/2024-25/096Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
Male Connector, 12.7 MM MNPTX 12.7 MM OD Tube, Material: SS316, 211 kg/sqcm (3000 psi) complete with ferrules & nuts as per ANSI B. 2.1. [ SAP Code - 7788048804]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
20
163
192.66
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require : 630x450mm with pair of pillar taps White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
2
3591
4237.46
... More
Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding sup plying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge: 16 amps. - 3 p ins - 3 module switch socket16 amps. - 3 pins - 3 module switch socket
5
715
843.97
... More
Power Distribution Works Supply of spares for Air Circuit Breaker , L&T make C Power or equivalent as per direction of Engineer-in-C harge. Under Voltage Release for L&T C-Power ACB, 240/415VUnder Voltage Release for L&T C-Power ACB, 240/415V
4
6008
7089.82
... More
Reinforcement for RCC-Upto plinth Level: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in p osition and binding all complete upto plinth level : TMT Bars (Fe-500D grade or more) Thermo-Mechanically Treated bars of grade Fe-5 00D or more
500
97
114.59
... More
Lettering with black Japan paint of approved brand and manufacture. [Note: Unit "EA" shall mean "PER LETTER PER CM HEIGHT"].
10000
5
6.44
... More
Welding in existing structure, pipe etc including mobilization of welder, machine for grinding, chipping etc., welding rod as approv ed by EIC and all other consumables required to complete the work in all respects as per instruction of EIC/site Engineer. Structura l steel/pipe etc will be supplied by owner.
50
2086
2462.46
... More
GST % for the Items
Please select the rate of GST in cell W13. Rate selected shall be applicable for entire BoQ.
-
-
-
... More
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
5
7895
9316.47
... More
MONTHLY ROUTINE MAINTENANCE OF WINDOW AC, SPLIT AC, WATER COOLERS ETC. Routine, regular and breachkdown maintenance of WAC, SAC, WC and cold storage of different make & different capacities. Installed at various location of Station premises, Station township & air monitoring station. Job includes attending the complaints of machines as per the complaint register and instruction of site enginee r. Job includes checking of machines, identification of defect, repair/replacement of defective component. Rewinding of blower motor . Replacement of Thermostat, Blower, Fan blade, electrical switches, control knob, wires. Cleachning of air filter, removal of dust from cooling coil & condenser by removing the machine from location if required. Attending the minor/major leakage of refrigerant ga s R- 22/R-12 arresting the leak and recharging the gas. Repair/replacement of defective bush/bearing of blower motor including lubri cation of blower motor, tightening of all the electrical connection. Repair/Replacement (by repaired compressor) of defective compre ssor. Job includes dismantling of defective compressor either at site or at workshop after transportation of machine to workshop, ta king necessary gate pass/permission from concerned authority, sending the defective compressor to repairer shop and bringing back th e same/replaced (repaired) compressor from repair shop to site, re-fixing, gas charging, testing & commissioning and making the mach ine in perfect working condition. Replacement of all type of defective capacitor. Job also includes connection/disconnection for hea ter as per requirement and also replacing/the new fixing the new heater in the machine. The heater shall be provided by the departme nt. Job complete in all respect including all consumables including gas, men & material and as per direction andRoutine, regular and breachkdown maintenance of WAC, SAC, WC and cold storage of differ
20
400
472.25
... More
Leave Encashment @ 1.3 days / 5% of basic+VDA {as per Facotries act} - Unskilled Worker
72
683
806.88
... More
Glazed SW Pipes (Class SP-1): Providing, laying and jointing glazed stoneware pipes Class SP-1 with stiff mixture of cement mortar i n the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :100 mm diameter 100 mm diameter
20
368
435.1
... More
Tube Cutter For tube sizes (¼” OD) to (1-1/2” OD) Frame [Sap Code- 8199980602]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
2
2334
2754.98
... More
Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includ es Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 40 W LED Light/Lamp, 230V AC, 50Hz40W LED Light/Lamp, 230V AC, 50Hz
10
1113
1313.95
... More
Fitting, Bushing, 25.4 MM X 12.7 MM NPT(F), Material: Carbon Steel, Manufacturing Process: Forged, Material Specification: A105, En d Finish: Threaded, conform to ANSI 16.11 [ SAP code 4323020064]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
20
100
119.12
... More
Installation of OFC Joint pit markers at every joint location as per specifications, drawings and directions of Engineer-in-charge/ Site Engineer
4
673
794.14
... More
CABLE TRENCH: Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres inclu ding shoring, strutting etc. (if necessary), backfilling the trench with excavated earth, as directed by Site Engineer, including all labour and materials complete as per drawings, specification and directions of Site Engineer.
200
641
756.71
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Power Contactor (Upto 2NO + 2 NC)- 32 Amp (AC3) f or AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML2 of L&T or equivalentPower Contactor (Upto 2NO + 2 NC)- 32 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50H
5
5100
6018.55
... More
Armored Cat 6 UTP Networking Cable as per specifications
610
69
81.5
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Automatic AC ammeter (Automatic Electric make or approved equivalent) 96 mm x 96 mm square type block backalite case/flush mounting/moving iron/spring controlled suppressed scale, C T operated AC ammeter/range 0-300- 1800 A, CT ratio 300/IA/accuracy +/-2.5%.Automatic AC ammeter (Automatic Electric make or approve d equivalent) 96 mm x 96 mm square t
3
585
690.51
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 35-63 Amps, L&T, HQ type, size A335-63 Amps, L&T, HQ type, size A3
10
161
190.12
... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 1 x 1.5 sq.mm1 x 1.5 sq.mm
50
29
34.5
... More
CP Brass Towel Ring (300mm dia) Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass
5
1564
1846.52
... More
Supply of Joint pit markers for OFC joint locations as per tender specifications
4
2879
3397.22
... More
Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherever sand bl ast cleaning is not possible) free of dust, grease, mill scales etc. and applying single layer polyurethane coating(PU) using 100% s olvent free elastomeric plyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all res pects as per specification and instructions of the Site Engineer / EIC.
5
2596
3064.38
... More
Half stall urinal basin with fittings: Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders: 1 Urinal with 5L Cistern S ingle half stall urinal with 5 litre P.V.C. automatic flushing cistern
2
10886
12846.2
... More
SS finished pull handle with roses: Providing and fixing stainless steel finished pull handle with roses of following size & type co mpl
10
1890
2231.2
... More
EARTH STRIP / WIRE / ROPE / CABLE Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthin g grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electro des and existing earthing grid etc., complete as per drawings, specifications and directions of the site 'Engineer, including the co st of all labour, tools, materials, etc. complete in all respect. (GI Wire / GI Rope ( 8 SWG )
200
67
79.58
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 63 AMP Size 00063 AMP Size 000
15
326
385.03
... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. Double poleDouble pole
20
626
739.1
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
10
2271
2680.31
... More
Vitrified Tile Flooring (With Mortar): Providing and laying vitrified floor tiles in different sizes (thickness to be specified by t he Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in al : Tile Size-600x600 mm Si ze of Tile 600x600 mm
25
1745
2059.31
... More
Varnishing: Varnishing with varnish of approved brand and manufacture :With copal varnish Two or more coats of glue sizing with copa l varnish over an under coat of flatting varnish
120
212
250.33
... More
Brass floor door stopper (hanging type) Providing and fixing bright finished brass hanging type floor door stopper with necessary sc rews, e
30
124
146.44
... More
Washroom Fittings: Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all material s, labour, tools, tackles etc. as per specifications and directions of the Engineer-in charge : CP Brass Double Coat Hook C.P. bras s double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
5
1191
1405.6
... More
Labour charges for the maintenance of Electrical, T&I, HSE and Mechanical equipments and assistance during all type of preventive/breakdown maintenance inside station,RCP/MOV locations, Saraipali T-Point. Skilled workers has been considered for Electrical- 01 no., T&I- 01 no., Mechanical- -01no., HSE-01no. It also includes the labour charges for the housekeeping of of 3.59 Hectare of station area 03 nos. unskilled workers has been considered for housekeeping of all the buildings,piping area, transmix tank area, pathways, water storage tank area, F/F shed area,OWS/sump tank area etc. (Labour-Skilled- 04 Nos., Unskilled -03 Nos.)
24
144668
170708.96
... More
Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding sup plying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge: 1 module blank ing plate1 module blanking plate
50
48
57.42
... More
Supplying and fixing of following way, prewired single pole and neutral sheet steel MCB consumer unit, 240 volts, on surface / reces s complete with tinned copper busbar, neutral link, earth bar, din bar, hinged front accrylic cover for the MCB knobs, detachable gl and plate, inter connections including painting, earthing etc. as required (with IP 42 protection and accrylic door) and as per dire ction of Engineer in-Charge. 8 - Way (2+2+6)8 - Way (2+2+6)
2
2045
2413.12
... More
CP Brass Taps with fittings: Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cut ting & making good the walls wherever required, etc. complete in all respects inclusive of cost - Bib Cock (JAQUAR-0021) Bib Cock (R ef. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
5
1700
2006.31
... More
PROVIDING COPPER LUGS FOR MAINTENANCE Supply of copper tube terminal heavy duty (crimping cable lug) of KSE / Dowells make or equiva lent certified by EIC. of the following sizes. 25 sqmm25 sqmm
50
14
16.52
... More
Washroom Fittings: Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all material s, labour, tools, tackles etc. as per specifications and directions of the Engineer-in charge : SS Liquid Soap Container Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.
5
2337
2757.93
... More
ADDITIONAL COPPER TUBE FOR SPLIT AC Supply & fixing of additional length of copper tube for split A/C commissioning including all ac cessories.Supply & fixing of additional length of copper tube for split A/C commissioning including all acces
20
662
781.29
... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. Four poleFour pole
10
1380
1628.74
... More
REWIINDING OF FANS Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/make including 1-phase and 3-phase type exhaust fans max. upto 2.2 KW capacity and supply of super enameled winding wire (Devi Dayal make, ISI marked insulation materi als required). This also includes replacement of single/double bearing SKF make/bushes (as per original make) and overhauling of fan and all jobs related to complete this work in totality. This also includes removal of fans from site, installation and commissionin g after testing of rewound fans and replacement of condenser, if required. This also includes transportation from site after dismant ling to Contractor’s workshop and back to site. Note: Contractor has to give guarantee for rewinding of above items for a period of six months and if winding is burnt again within six months of working of fans, it has to be rewound again of Contractor. The burnt w inding shall be kept by Contractor. Exhaust/air circulators fans.Exhaust/air circulators fans.
2
1124
1326.71
... More
Power Distribution Works Supply of spares for Air Circuit Breaker , L&T make C Power or equivalent as per direction of Engineer-in-C harge. Spring charging motor for L&T C-Power ACB, 240/415VSpring charging motor for L&T C-Power ACB, 240/415V
2
28095
33152.38
... More
11 KV (E) / (UE)/ 6.6 KV (UE) CAST RESIN COMPOUND OUTDOOR PVC/XLPE CABLE ARMOURE ALUMINIUM END TERMINATION (INCLUDING COST OF END TE RMINATION KIT) Providing end termination of power cable including cutting, stripping, providing & fixing of lugs, cable insulation, providing & glanding single/double compression heavy duty brass cable gland conforming to IS-12943 , providing aluminium lugs, crimp ing/soldering, as necessary, restoration of insulation/ clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour including travel,transportation, boarding and lodging of the cable jointer and materials as per standard and direction of the Engineer-in-Charge. Make of kits shall be of CCI/ Mahindra/ approved equivalent type.-3 x 185 sqmm
2
20798
24542.35
... More
11 KV (E) / 6.6KV (UE) CAST RESIN COMPOUND STRAIGHT THROUGH ARMOURED ALUMINIUM PVC/XLPE CABLE JOINTING (INCLUDING COST OF JOINTING K IT & FERRULES)) Making straight through cable joint for power (PVC/XLPE) armoured cable and following sizes and grade including cutt ing, stripping of cable insulation all complete with labour including travel,transportation, boarding and lodging of the cable joint er and materials including cost of jointing kit as per standard and direction of the Engineer-in- Charge. Make of kits shall be of C CI/ Mahindra/ approved equivalent type.-3 x 185 sqmm
2
20727
24458.31
... More
REWINDING OF MOTORS: Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capaciti es as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang an d overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applyi ng insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor wind ing to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the s cope of contractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately o n trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per dec ision of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF make & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Cont ractor. Bearing Shall be supplied by IOCL Motors above 1.5 KW but upto including 3.7KWMotors above 1.5 KW but upto including 3.7KW
5
2363
2788.47
... More
Providifng and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required,. (For horizont al run)Providifng and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightnin
20
1005
1186.71
... More
Brass Stop Cock: Providing and fixing brass stop cock of approved quality : 15mm nominal bore 15 mm nominal bore
5
351
415.22
... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 2 x 4 sq.mm2 x 4 sq.mm
100
87
103.3
... More
Retrenchment benefit - UnSkilled worker
72
656
774.61
... More
Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcud ing supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge: 6 module6 module
5
236
279.38
... More
Overtime Work beyond office hours-Unskilled(03 no.s)
180
131
155.17
... More
Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding sup plying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.amps. - 1 way - SP - 1 module switches6 amps. - 1 way - SP - 1 module switches
25
86
101.81
... More
Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includ es Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 18 W, LED Tubelight Fighting, 230V AC, 50Hz18W, LED Tubelight Fighting, 230V AC, 50Hz
20
189
223.57
... More
Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used. 40 amps. Single Pole40 amps. Single Pole
5
345
407.64
... More
SERVICE CHARGES OF PARTY: The service charges includes profit of contractor, supervision and overhead charges,cost of safety helmet & safety shoe, 1 set pull over/jacket for each personnel engaged by the contractor as described in SCC (pattern of which to be approved by Engineer-in-Charg e), and other related services like extra manpower, police verification, annual health check up of workers etc. with providing all tools, Irrigation Pipe, Manual hedgecutter (scissors), spade, Gainti,weeder, Spray machine, Electric cable,Garbage trolly, Electric lawn Mower, Motorised Brush Cutter, broom, bucket, mops and all other Common equipment required according to site as directed by E ngineer In Charge.
24
21700
25606.34
... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. Single poleSingle pole
20
210
248.56
... More
Variable Part: (Rates to be quoted by the bidder)
-
-
-
... More
Kerb Stone (M-25 grade)Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in positio n to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening whereve r required complete etc. as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured f or payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.]
2
9741
11495.17
... More
Supplying and fixing following rating, single pole & double pole isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked isolators shall be used. 63 amps. Single Pole63 amps. Single Pole
5
371
438.32
... More
Installation of OFC jointing kits as per drawings, specifications and directions of Engineer-in-charge/ Site Engineer
4
5520
6513.6
... More
Insurance Scheme (PMJBY @ Rs. 20.00 & PMSBY @ Rs. 436.00)
14
456
538.08
... More
Bright/matt finished SS handles: Providing and fixing bright/ matt finished Stainless Steel handles of approved quality & make with necessary SS screws etc. all complete as per direction of the Engineer-in-Charge :125 mm 200 mm (Fancy Handle)
30
175
206.68
... More
Power Distribution Works Supply of spares for Air Circuit Breaker , L&T make C Power or equivalent as per direction of Engineer-in-C harge. Shunt Release for L&T make C-Power ACB, 240/415VShunt Release for L&T make C-Power ACB, 240/415V
4
2683
3166.88
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in req uired colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver b locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge :60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
40
1028
1214.2
... More
OVERHAULING OF WINDOW AC, SPLIT AC, WATER Overhauling and painting of WAC, SAC, WC & Cold Storage of different make & different capa cities located at various location within the Station premises, Station township and air monitoring stations, job includes removal o f machines from location, dismantling, cleaning, washing, chemical cleaning of condenser & cooling coil, overhauling, lubrication of blower motor, checking, repair/rectification/replacement of effective control component. Painting of all metal part and chassis cov er internal painting with primer & outer painting with synthetic enamel paint. Cleaning of coil & condenser to be done with wire bru sh. Defective/damage insulation to be replaced. All the electrical wires must be dressed properly. Defective wires to be replaced in cluding supply of wires. Defective/damage asbestos sheet to be replaced. Asbestos sheet shall be provided by the owner. Cleaning/rep lacement of filter by Nylon filter. Re-assembly of machine, shifting to location & testing of machine. Job complete in all respect i ncluding men & material and as per direction and instruction of Site Engineer/Engineer-in- Charge.Overhauling and painting of WAC, S AC, WC & Cold Storage of different make & different c
20
995
1174.61
... More
Power Distribution Works Supply of spares for Air Circuit Breaker , L&T make C Power or equivalent as per direction of Engineer-in-C harge. Closing coil for L&T C-Power ACB, 240/415VClosing coil for L&T C-Power ACB, 240/415V
4
4751
5606.24
... More
Overtime Work beyond office hours-Skilled(04 no.s)
240
184
218.01
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and f ixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing r equired door fittings, all complete as per directions of the Engineer-in-Charge. [Note: Door handle, lock and stopper etc.to be paid separately].
10
5173
6104.15
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Power Contactor (Upto 2NO + 2 NC)- 40 Amp (AC3) f or AC standard coil voltage - 110, 230, 415 V, 50Hz Type ML3 of L&T or equivalentPower Contactor (Upto 2NO + 2 NC)- 40 Amp (AC3) for AC standard coil voltage - 110, 230, 415 V, 50H
5
5807
6853.13
... More
LT STRAIGHT THROUGH CABLE JOINT FOR ARMOURED PVC INSULATED CABLE (INCLUDING COST OF JOINT KIT OF CAST RESIN TYPE WITH IS MOULD) Maki ng straight through joints for medium voltage PVC armoured power & control cables (upto 1.1 KV grade) including cutting, stripping o f cable insulation, including supply of cast resin straight through cable jointing kit with IS mould of Mahindra /CCI/ approved equi valent make with ferrules. All complete with labour and materials as per drawings, specifications and directions of Engineer-in-char ge. 3 x 50 sqmm3 x 50 sqmm
3
1816
2143.47
... More
Neat cement punning.
30
72
86.12
... More
PROVIDING COPPER LUGS FOR MAINTENANCE Supply of copper tube terminal heavy duty (crimping cable lug) of KSE / Dowells make or equiva lent certified by EIC. of the following sizes. 35 sqmm35 sqmm
20
20
23.65
... More
Dismantling & shifting of Split Air Conditioning Unit 1.0TR / 1.5TR / 2.0TR capacity including indoor and outdoor unit, refrigerant tubing etc. complete to new location or A/C workshop as per direction of Engineer-in-charge.Dismantling & shifting of Split Air Cond itioning Unit 1.0TR / 1.5TR / 2.0TR capacity including indo
10
1798
2122.49
... More
Premium Acrylic Emulsion paint (Exterior Grade): Finishing walls with 100% Premium Acrylic Emulsion paint having VOC less than 50 gm s/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of requir:New work (two o r more coats) New work (two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterio
300
170
200.64
... More
Supply and fixing of earth bus bar of GI flat of following size on wall etc. with a clearance of 6 mm from the wall with spacing ins ulator GI rack bolts wherever necessary including drilling 6 mm dia holes at about 25 mm apart complete with double nuts, washers GI machine tools etc. all complete with labour and materials as per direction of the Engineer-in- Charge. (40 X 5 MM GI FLAT)40 X 5 MM GI FLAT
50
185
219
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with al l fittings and fixtures complete. 10 litre capacity- White 10 litre capacity - White
2
1162
1372.29
... More
SS (Grade 304) railing Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc
100
669
789.73
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cem ent compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours foll owed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet a ll around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of mea surement the entire treated surface will be measured.
50
608
717.82
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and s hade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour an d texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matc hing pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : Area of slab over 0.50 sqm
5
4660
5499.97
... More
Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Greaves /Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materials as per drawin gs, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor: FRESH AIR FAN WITH LOUVER SHUTTER 300MM SWEEPFRESH AIR FAN WITH LOUVER SHUTTER 300MM SWEEP
2
2247
2652.46
... More
Providing and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor as required,. (For vertical run)Providing and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning
20
1618
1910.29
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obta ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] :Nominal con crete 1:4:8 or leaner mix (including equivalent design mix)
5
1247
1472.27
... More
Supply and installation of L&T / Siemens OR equivalent make DOL / Star-Delta motor starter (WITH ALL ACESSARIES INCLUDING O/L RELAY / TIMERS ETC.) conforming to IS:13947-4 on walls/steel structure, connection of cables all complete with labour and materials as per direction of the Engineer-in-Charge. 7.5KW , DOL7.5KW , DOL
2
3371
3977.99
... More
Female Connector, 12.7 MM FNPT X 12.7 MM OD Tube, 211 kg/sqcm (3000 lbs) complete with ferrules and nut as per ANSI B.2.1, Material : SS316. [SAP Code -7788048774]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
20
185
219.14
... More
Premium acrylic emulsion paint (Interior Grade): Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Vo latile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying add:Two Coats
250
132
156.31
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 4-32 Amps, L&T, HQ type, size A24-32 Amps, L&T, HQ type, size A2
20
138
163.77
... More
CPVC Piping (Internal Work-Exposed): Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pip es, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitt: 20 mm nominal outer dia pi pes 20 mm nominal outer dia pipes
100
356
421.25
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanised steel sections (g alvanising AT 120 grams/sq.m. including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length a nd of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross 'T' of size 24x28 mm made ou t of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm centre to centre to form a grid of 1200x600 mm and seco ndary cross 'T' of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200x 6 00 mm panel to from grid of size 600x600 mm, resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of si ze 24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wa ll screws 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, in cluding cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever requir ed. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85x30x0.8 mm, spaced at 1200 mm cent re to centre along main 'T', bottom exposed with 24 mm of all 'T' sections shall be pre-painted with polyster baked paint, for all h eights, as per specifications, drawings and as directed by the Engineer-in-Charge. (Note: Only calcium silicate false ceiling area w ill be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non-combustible as per B.S. 476 (P art-IV), 100% humidity resistance and also having thermal conductivity 0.043 w/mK.)
25
1911
2256.1
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge]
5
2947
3478.55
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete : On steel work On steel work
100
220
260.4
... More
Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding sup plying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge: 6 amps. - 2 / 3 pins combined 2 module shutterred socket6 amps. - 2 / 3 pins combined 2 module shutterred socket
10
234
276.26
... More
Supply, fixing and connection of Philips/approved equivalent make tube light fittings alongwith tubes (tubes cost will be paid separ ately) and control gear the necessary control gear fully wired up and fixing on existing TW varnished double board round blocks on w all including supply & fixing of round blocks, lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge..TYPE TMC 501/136 (HPF) mounting rail for LED lampsTYPE TMC 501/136 (HPF) mounting rail for LED lam ps
10
1542
1820.13
... More
REPLACEMENT OF BURNT UNCUT COMPRESSOR Replacement of burnt uncut compressor of 1.5-ton capacity from the manufacturer whenever requi red as per direction of engineer-in-charge.Replacement of burnt uncut compressor of 1.5-ton capacity from the manufacturer whenever required a
4
13081
15435.88
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to m atch the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) :Dark shade pigment using ordinary cement
20
1079
1273.56
... More
STEEL STRUCTURAL WORKS - Supply, fabrication, erection and installation of steel/GI structural works of any type and shape such as c able racks, trays, push button, control posts, ladders, lugs, chain link, fencing, angles, joints, channels, plates, flats, bars etc as required as per specifications, drawings, directions of site engineer/engineer in-charge, inlcuding cost of all labour, material s, tools, consumables etc complete in all respects. Job is inclusuve of taking delivery from owner's go down and shifting to site wh erever required.
300
147
173.67
... More
Flat brick soling Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with
50
724
855.19
... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. Triple poleTriple pole
20
916
1081.85
... More
PROVIDING FLAMEPROOF DOUBLE COMPRESSION (BRASS) CABLE GLANDS Supply of CMRS / CCE approved flameproof double compression (brass) cab le gland for following overall cable sizes as per directions of Engineer-in-Charge. 23.5 to 26.0 mm23.5 to 26.0 mm
10
405
478.67
... More
Retrenchment benefit -Skilled worker
96
922
1088.28
... More
Synthetic enamel paint: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more co ats on new work Two or more coats on new work
500
141
166.82
... More
Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of the establishme nt, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroaches, mosquit oes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide baits, glue tra ys, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trenches upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, consumables et c complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when require d as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designated by EIC. Rat e is For (PER SQM PER MONTH)
120000
1
2.28
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. :With SS cover pl ate With stainless steel cover plate minimum 1.25 mm thickness
10
2805
3310.83
... More
White cement based putty on wall Providing and applying white cement based putty of average thickness 1 mm, of approved brand and ma
300
133
158.03
... More
Intrinsically safe Rate of Rise Heat Detectors for hazardous areas alongwith all mounting & other accessories as per the tender spec ifications
2
6363
7508.69
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neopre ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] : Polye ster Powder Coated Aluminium Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron)
100
540
637.74
... More
Supply of thermostat suitable for water cooler, window type rac whenever require as per direction of site engineer / engineer-in-cha rge.Supply of thermostat suitable for water cooler, window type rac whenever require as per direction o
10
450
531.79
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M. S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connect ion with the building etc wherever required for inspection of work at required locations with essential safety features for the work men etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shall be measure d for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be used for mainte nance work judicially, necessary deduction for scaffolding in the existing item to be done]
100
300
354.01
... More
Supplying and drawing following size of FRLS PVC insulated, copper conductor, single core cable in the existing surface / recessed, PVC / steel conduit / PVC casing and capping as required. Note: Only ISI marked cables shall be used. 2 x 2.5 sq.mm2 x 2.5 sq.mm
50
56
66.61
... More
Union Tee, 3X12.7 MM OD Tube, 211 kg/sqcm (3000 lbs) as per ANSI 16.11, Material : SS316. [Sap Code- 8191021724]Supply of Field Fit tings & SS Tubes.- Non-Coastal Application - As per tender Specification
20
398
470.61
... More
Fabrication & supply of Retro reflective signage boards made up of 3 mm thick Aluminium composite sheet (with minimum 0.25 mm alumin ium Skin thickness on both sides). Faces to be fully covered with CLASS B SHEETING: - High Intensity Prismatic grade sheeting as per ASTM D 4956-09 Type IV as approved by Engineer-in-charge. including all tools, tackles, materials as per sample, specification and direction of EIC
100
325
383.77
... More
Brass door latch: Providing and fixing bright finished brass door latch with necessary screws etc. complete :300x16x5 mm 300x16x5 mm
10
316
373.82
... More
Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick shutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside grooves or reb ates shall be measured for payment] :Float Glass Pane-5.5mm thick Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM )
10
2462
2905.17
... More
Hydrostatic testing of DCP extinguishers of capacity (5/9/25/50/75Kg.), inspection of safety valve (wherever required) by emptying o ut powder, carrying out hydrostatic testing, drying & refilling the extinguisher and providing operating instruction stickers and re turning the same inclusive of all labour material, transportation and all the other incidental expenses). The testing to be carried out in the station only.
45
347
410.6
... More
Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or e quivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: Ca t No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with spe cials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and bracket s, cutting and making good the walls and floors wherever required : With white solid plastic seat & lid W.C. pan with ISI marked whi te solid plastic seat and lid
2
7774
9174.29
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but with out fittings and the base support for tank.
6000
10
12.08
... More
Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includ es Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 15 W, Outdoor LED Light Fitting, IP55, 230V AC15W, Outdoor LED Light Fitting, IP55, 230V AC
20
454
536.38
... More
REPLACEMENT OF BURNT UNCUT COMPRESSOR Replacement of burnt uncut compressor of 1.0 ton capacity from the manufacturer whenever requi red as per direction of engineer-in-charge.Replacement of burnt uncut compressor of 1.0 ton capacity from the manufacturer whenever required
5
11716
13825.18
... More
Installation of Infrared HYDROCARBON DETECTORS (point type / open pathtype), terminating the cables at field and control panel / RTU end, connecting to earthing grid by supplying and installing all the required materials such as supporting structure, canopy, cemen t concrete, painting, GI wire etc.(excluding supply of the Hydrocarbon detector) complete in all respectsas per specifications.
2
4366
5153.05
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceab le material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre l ead as per directions of the Engineer-in-Charge.
50
32
38.49
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Power Contactor (with 1NO + 1NC)- Upto 25 Amp (AC 3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Type MNX25 of L&T or equivalentPower Contactor (with 1NO + 1NC)- Upto 2 5 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 4
5
1685
1989.03
... More
Supply of Cotton Rags including transportation and all charges
1000
69
82.49
... More
Hydraulic testing of Breathing Appratus Set
4
831
981.48
... More
Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding sup plying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge.:16 amps. - 1 w ay - SP - 1 module switches16 amps. - 1 way - SP - 1 module switches
10
132
156.7
... More
Fixing of exhaust fans on existing opening, complete with lead in wires and other accessories Fixing of exhaust fans on existing ope ning, complete with lead in wires and other accessories :WITH LOUVER SHUTTER/MESHWITH LOUVER SHUTTER/MESH
3
523
617.86
... More
Brickwork (Non Modular)-In foundation & plinth: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7 .5 in foundation and plinth in :In CM 1:4 Cement mortar 1:4 (1 cement : 4 coarse sand)
5
7415
8750.56
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Thermal Relays type L&T MN2 or equivalent with si ngle phasing protection - 0.9 - 1.5 A to 6.0-10.0 A (Direct operated) as per direction of Engineer-in-Charge.Thermal Relays type L&T MN2 or equivalent with single phasing protection - 0.9 - 1.5 A to 6.0-10.0
10
4508
5320.15
... More
LT STRAIGHT THROUGH CABLE JOINT FOR ARMOURED PVC INSULATED CABLE (INCLUDING COST OF JOINT KIT OF CAST RESIN TYPE WITH IS MOULD) Maki ng straight through joints for medium voltage PVC armoured power & control cables (upto 1.1 KV grade) including cutting, stripping o f cable insulation, including supply of cast resin straight through cable jointing kit with IS mould of Mahindra /CCI/ approved equi valent make with ferrules. All complete with labour and materials as per drawings, specifications and directions of Engineer-in-char ge. 3 x 35 sqmm3 x 35 sqmm
5
1540
1817.34
... More
PROVIDING FLAMEPROOF DOUBLE COMPRESSION (BRASS) CABLE GLANDS Supply of CMRS / CCE approved flameproof double compression (brass) cab le gland for following overall cable sizes as per directions of Engineer-in-Charge. 18.5 to 20.0 mm18.5 to 20.0 mm
10
282
333.36
... More
Lighting Works Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved eq uivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Cha rge:6 module6 module
5
152
179.45
... More
Supply and fixing of below given metal flush boxes to accommodate mosaic wiring accessories of M/s MDS or approved equivalent inlcud ing supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge: 8 module 8 module
5
258
305.11
... More
Wiring for submain wiring with following sizes of FRLS PVC insulated, copper conductor, single core cable in recessed steel conduit as required. Note: Only ISI marked conduits & cables shall be used. 2 x 2.5 sqmm with 2.5 sqmm earth wire2 x 2.5 sqmm with 2.5 sqmm earth wire
50
214
252.98
... More
PPE Cost (2 sets of uniform i.e 02 trousers, 02 shirts, 02 pairs of socks or boiler suit @ Rs. 3000 & one pair of safety shoe @ Rs. 800, helmet @ Rs. 200, waist coat/jacket @ Rs.500) @ Rs. 4500 per worker
14
4500
5310
... More
Priming coat with primer (low VOC): Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile O rganic Compound) content :Water thinnable cement primer With water thinnable cement primer on wall surface having VOC content less t han 50 grams/ litre.
500
69
82.34
... More
PVC coated GI wire (4mm dia.) Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colo
50
959
1132.61
... More
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed du ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations]
5
1709
2017.25
... More
12 mm cement plaster of mix :1:4 (1 cement : 4 fine sand)
25
310
366.22
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 20-32 AMP Size 00020-32 AMP Size 000
15
285
337.29
... More
Hex Nipple, 12.7 MM MNPT X 12.7 MM MNPT X 80 MM Long, Material : SS316. [SAP Code: 4399997284/4399999102]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
20
81
95.58
... More
Supply of CAT6 cable (unarmoured)
610
62
73.53
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Thermal Relays type L&T MN2 or equivalent with si ngle phasing protection - 20-33 A (Direct operated)Thermal Relays type L&T MN2 or equivalent with single phasing protection - 20-33 A (Direct operate
5
2499
2949
... More
Supplying at site, steel structural items such as steel plates, bars, MS gratings, chequered plates, angles, beams channels, commerc ial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plates etc., fabrication and erection of saddl e supports and other type of supports for pipes manifolds and valves, fabrication and erection of platforms walkways, stairways etc. , sand blast/ power brush cleaning, priming and painting the finished structures including supply of all other inputs such as labour , materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
2.5
122975
145110.94
... More
Supply, installation,testing and commissioning of occupancy sensor based on PIR technology-non regulated programmableSupply, install ation,testing and commissioning of occupancy sensor based on PIR technology-non regu
2
4558
5378.85
... More
Installation of pre-fabricated RCC (1:1.5:3) Joint Box with lid as per tender specifications, drawings and directions of Engineer-i n-charge/ Site Engineer.
4
1593
1879.74
... More
Supply, fixing and connection of following KNIFE TYPE (DIN) / BOLTED HRC fuse link AS PER IS:13703:1993 & IEC 269:1986 of M/S HAVELL /L&T /G EC Astholm/Standard /MDS make or approved equivalent in distribution board etc.all complete with labour and materials as per direction of Engineer-in-charge. 50 AMP Size 00050 AMP Size 000
15
302
357.04
... More
REWIINDING OF FANS Rewinding of ceiling/pedestal/exhaust/air circulator fans of all types/sizes/make including 1-phase and 3-phase t ype exhaust fans max. upto 2.2 KW capacity and supply of super enameled winding wire (Devi Dayal make, ISI marked insulation materia ls required). This also includes replacement of single/double bearing SKF make/bushes (as per original make) and overhauling of fan and all jobs related to complete this work in totality. This also includes removal of fans from site, installation and commissioning after testing of rewound fans and replacement of condenser, if required. This also includes transportation from site after dismantl ing to Contractor’s workshop and back to site. Note: Contractor has to give guarantee for rewinding of above items for a period of s ix months and if winding is burnt again within six months of working of fans, it has to be rewound again of Contractor. The burnt wi nding shall be kept by Contractor. Ceiling/pedestal fansCeiling/pedestal fans
2
797
941.53
... More
Supply, installation, testing and commissioning of ceiling fans of Bajaj/Crompton Greaves/Khaitan/Usha make only including supply an d fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, specifica tions and directions of Engineer-in-Charge:1200 MM SWEEP (WHITE)1200 MM SWEEP (WHITE)
2
2548
3007.47
... More
Providing and fixing 450 mm deep storage cabinet (All types- low height, full height and over head) with boxing and shutters finishe d with 19 mm thick pre-laminated block board of BWP Grade, Decorative type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) with, 1.5’ x 1.25’ mm rubber wood/ C.P. teak moulding, complete in all respect including all hardware and polishing of wooden surfaces in natural shade with melamine a s per drawings, specification and directions of the Engineer-in-Charge. [Note: Elevation area shall be measured for payment purpose. ]
5
10345
12208
... More
Hydraulic door closer (Aluminium) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories a nd screws etc. complete.
10
1167
1377.18
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to all leads, also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
20
376
444.52
... More
Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc ., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboard s, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint "EPILUX 155" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anch or plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.comp lete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (excluding the cost of concrete work).
1
131481
155148.37
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Control contactors- 4 contacts for DC control sta ndard coil voltage - 24, 110, 220 Type MN0 of L&T or equivalent.Control contactors- 4 contacts for DC control standard coil voltage - 24, 110, 220 Type MN0 of L&T
2
1808
2134.38
... More
CPVC Piping (Internal Work-Exposed): Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pip es, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitt: 15 mm nominal outer dia pi pes 15 mm nominal outer dia pipes
100
280
331.5
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm ISI marked FRLS PVC insulated copper conductor single core cable in recessed steel conduit (20mm), with piano type switch, phenolic laminated sheet, suitable size MS box and earth ing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Note: Only ISI marked conduits , cables, switches and socket outlets shall be used. Long point (conduit length more than 6m but upto and including 10m) -Long point (conduit length more than 6m but upto and including 10m) -
20
1870
2207.6
... More
Supplying and fixing 5 amps. To 32 amps. Rating, 240/ 415 volts, 50Hz, 10KA 'C' curve, miniature circuit breaker (suitable for motor and other inductive loads and conforming to IS 8828: 1996, IEC 60898: 2002) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Note: ISI marked MCBs of Havells / Loadster / Indo Kopp or equivalent make shall be used as per direction of Engineer- in-Charge. Single pole and neutralSingle pole and neutral
20
581
686.06
... More
Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & appro ved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications an d directions of the Engineer-in-Charge.
5
3056
3607.2
... More
CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of te lephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, s tructures and panels) complete in all respect,as per specifications,drawings and directions of the SiteEngineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths :Cables having outer diameter between 20 t o 30 mm
300
91
107.62
... More
Brass tower bolts (barrel type): Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. com plete :250x10 mm 250x10 mm
30
434
512.79
... More
Supplying, installing, testing and commissioning of TPN tap off box of following capacity on the existing rising mains and complete with HRC fuse links, interconnections, earthing etc. as required. 100 A TPN100 A TPN
1
11899
14041.48
... More
2 Way Valve Manifold 2 x 12.7 MM FNPT, Material : SS316 with blanking plug for each port. [ SAP Code 8450501124]Supply of Field Fitt ings & SS Tubes.- Non-Coastal Application - As per tender Specification
5
1318
1555.79
... More
CABLE LAYING: Laying of armoured / unarmoured cables (control / signalling/ Triad/ LT cable etc.) and installation / pulling of te lephone cables of all type in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels, in buildings, walls, ceilings, and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, s tructures and panels) complete in all respect,as per specifications,drawings and directions of the SiteEngineer, including cost of all labour, tools, consumable materials etc. and cutting the cables in required lengths: Cables having outer diameter upto 20mm
200
80
94.71
... More
Installation of split type wall Mounted Air Conditioner indoor, outdoor unit fitted with rotary compressor, copper condenser and fir st charge refrigerant R410A/R22/Other, including connection of copper pipe and material supplied with complete unit etc. as required (Excluding cost of copper pipe) within Station / Petrochemical Complex/ Station Township as per direction of Engineer-in-charge.Ins tallation of split type wall Mounted Air Conditioner indoor, outdoor unit fitted with rotary com
6
1854
2188.14
... More
Supply & fitting of rubber beeding of one hose box (both doors) including removing of worn out rubber beeding, labour charges, tool s & tackles etc. as per direction of EIC/SE
40
173
204.66
... More
11 KV (E) / (UE)/ 6.6 KV (UE) CAST RESIN COMPOUND INDOOR PVC/XLPE CABLE ARMOURE ALUMINIUM END TERMINATION (INCLUDING COST OF END TER MINATION KIT) Providing end termination of power cable including cutting, stripping, providing & fixing of lugs, cable insulation, p roviding & glanding single/double compression heavy duty brass cable gland conforming to IS-12943 , providing aluminium lugs, crimpi ng/soldering, as necessary, restoration of insulation/ clamping of cable, tagging with aluminium tag,earthing of armour, connection to the equipment terminals etc. all complete with labour including travel,transportation, boarding and lodging of the cable jointer and materials as per standard and direction of the Engineer-in-Charge. Make of kits shall be of CCI/ Mahindra/ approved equivalent t ype.
2
16715
19724.16
... More
Process Tube, Material: Stainless Steel, Manufacturing process: Seamless, Mat Specification:ASTM A269, Grade: TP316, end Finish: Pl ain End, 1/2 IN OD, 0.065 IN Thickness, 3000 MM Length. [Sap Code 4215687754]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
50
327
386.21
... More
Supply and providing cleaning material (hand wash liquid soap - 05 litre, Harpic - 5 litre,urinal mat- - 02 nos, Room freshnar(Godre j aer 240 ML) - 02 bottles, Phenol - 05 litre, colin - 2 litre, odonil bathroom freshnar, 50g- 10 packet,hand towel - 04 nos., Hand tissue paper - 02 packs, Toilet tissue paper roll - 05 nos., detergent (surf exel)- 05 Kg, Lizol floor cleaner - 02 litre, Naphthal ene balls - 500 gram )
24
6971
8226.55
... More
Providing salt and charcoal for plate earth electrode as required. 96 kg charcoal and 5 kg salt96 kg charcoal and 5 kg salt
5
1157
1365.66
... More
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood parti cle board IS:12823 marked, exterior grade (Grade-l, Type-ll), having one side decorative lamination and other side balancing laminat ion, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel pi ano hinges, complete as per directions of the Engineer-in-Charge.
10
2243
2647.16
... More
Surface preparation of piping, equipment and valves etc. by abrasive blast cleaning or with power wire brush (wherever blast cleanin g is not possible) confirming to SA 2.5, making the surface free of dust, grease, mill scales etc., application of 1 coat x 50-75 mi crons DFT of Inorganic Zinc Ethyl Slicate Primer, followed by application of sealer coat of 30 micron DFT and intermediate coat of 1 50 micron DFT with surface tolerant epoxy mastic paint and 2 coats x 50 micron each DFT of Isocynate Aliphatic Poly Urethene (PU) by airless spray, with approved materials, paints, tools, tackles, consulambles, non-consumables, labour, equipment etc. to complete t he job in all respects as per specification and instructions of the Site Engineer / EIC. The total DFT shall be minimum 330 microns.
20
1505
1776.8
... More
CPVC Piping (Internal Work-Concealed): Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fi : 15mm nominal dia pipes 15 mm nominal dia pipes
50
476
562.2
... More
Wiring for submain wiring with following sizes of FRLS PVC insulated, copper conductor, single core cable in recessed steel conduit as required. Note: Only ISI marked conduits & cables shall be used. 2 x 4 sqmm with 4 sqmm earth wire2 x 4 sqmm with 4 sqmm earth wi re
30
248
293.54
... More
Supply, fixing and connection of 250 V below given mosaic modular wiring accessories of M/s MDS or approved equivalent inlcuding sup plying and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Charge: Two module ste pped type electronic fan regulator 100WTwo module stepped type electronic fan regulator 100W
5
343
405.8
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleanin g machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operato r, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing o f sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up to 300 mm dia for all depth.
200
298
352.56
... More
Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips/Osram/Havells/Wipro/Bajaj/Eveready/SYSKA/Oreva/Crompton or equivalant Indian make). Item includ es Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 45 W, Flaimproof LED Light Fitting for hazardous area, 230V AC, 50Hz 45W, Flaimproof LED Light Fitting for hazardous area, 230V AC, 50H z
10
3361
3966.49
... More
Brass Bib Cock: Providing and fixing brass bib cock of approved quality :15mm nominal bore 15 mm nominal bore
5
351
415.22
... More
REWINDING OF MOTORS: Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capaciti es as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang an d overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applyi ng insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor wind ing to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the s cope of contractor excluding transportation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately o n trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per dec ision of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF make & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Cont ractor. Bearing Shall be supplied by IOCL Motors above 3.7 KW but upto including 7.5KWMotors above 3.7 KW but upto including 7.5KW
5
3771
4449.86
... More
Supplying and fixing following rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current indicated miliamperes in the existing MCB DB complete with connections, testing and commis sioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 63 amps,, 300 mA63 amps,, 300 mA
5
2469
2914.47
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
50
1198
1413.95
... More
Supply, fixing and connection of Philips/approved equivalent make tube light fittings alongwith tubes (tubes cost will be paid separ ately) and control gear the necessary control gear fully wired up and fixing on existing TW varnished double board round blocks on w all including supply & fixing of round blocks, lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge..TYPE TMC 501/136 (HPF) mounting rail for LED lampsTYPE TMC 501/136 (HPF) mounting rail for LED lam ps
5
985
1163.42
... More
Supply of pre-fabricated RCC (1:1.5:3) Joint Box with lid as per tender specifications
4
10286
12137.48
... More
Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with w ooden cleats and C.P. brass screws etc. complete.
5
1507
1778.45
... More
Tube End Cap ( Sq Head), 12.7 MM OD Tube, 211 kg/sqcm (3000 lbs) as per ANSI B 16.11, Material : SS316. [SAP Code - 8192999024]Supply of Field Fittings & SS Tubes.- Non-Coastal Application - As per tender Specification
20
99
117.4
... More
INSTALLATION OF PI+PS/PT: Installation, assistance in testing and commissioning of Pressure gauges and Pressure switches (PI+PS) / p ressure Gauge and pressure transmitter (PI+PT) of various ratings as per the directions of Engineer-in-charge/ Site engineer and dra wings
4
7893
9314.53
... More
Supply of Digital Telephone Instrument as per tender specifications
2
6370
7517.33
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm ISI marked FRLS PVC insulated copper conductor single core cable in recessed steel conduit (20mm), with piano type switch, phenolic laminated sheet, suitable size MS box and earth ing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Note: Only ISI marked conduits , cables, switches and socket outlets shall be used. Medium point (conduit length more than 3m but upto and including 6m) -Medium po int (conduit length more than 3m but upto and including 6m) -
5
1352
1596.03
... More
Fixed Part: (Rates not to be quoted by the bidder)
-
-
-
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Thermal Relays type L&T MN5 or equivalent with si ngle phasing protection - 45-75 A (Direct operated)Thermal Relays type L&T MN5 or equivalent with single phasing protection - 45-75 A (Direct operated
2
5871
6928.38
... More
Equipment Hire Charges considered in rate analysis (Rates are inclusive of free supply of fuel & operator charges wherever applicabl e):.Hydra of capacity more than 3 MT but up to 10 MT
60
4035
4761.31
... More
Supply, installation, testing and commissioning of single phase , Fresh Air Fans / Heavy duty Exhaust Fans of Bajaj/Crompton Greaves /Khaitan/Usha make only including supply and fixing with all necessary supports All complete with labour and materials as per drawin gs, specifications and directions of Engineer-in-Charge.. NOTE: Necessary civil works required for fixing the exhaust fans shall be in the scope of Contractor: HEAVY DUTY EXHAUST WITH LOUVER SHUTTER 450MM SWEEP,1400 RPMHEAVY DUTY EXHAUST WITH LOUVER SHUTTER 450MM SWEEP,1400 RPM
10
6258
7384.97
... More
Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, cl ipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres made of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a di stance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spring clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all complet e as per manufacturer's recommendation and directions of the Engineer-in-Charge. [Note: Measurement shall be made wall to wall witho ut any deduction for openings, for payment purpose].
5
6828
8057.77
... More
Providing and fixing approved stainless steel finished tower bolts (barrel type) 10 mm diameter & 200 mm long with screws etc. compl ete as per drawings, specification and directions of the Engineer-in-Charge.
20
856
1010.55
... More
Leave Encashment @ 1.3 days / 5% of basic+VDA {as per Facotries act} - Skilled Worker
96
960
1133.63
... More
Supply and fixing of earth bus bar of GI flat of following size on wall etc. with a clearance of 6 mm from the wall with spacing ins ulator GI rack bolts wherever necessary including drilling 6 mm dia holes at about 25 mm apart complete with double nuts, washers GI machine tools etc. all complete with labour and materials as per direction of the Engineer-in- Charge. (50 X 6 MM GI FLAT)50 X 6 MM GI FLAT
100
233
275.92
... More
GAS CHARGING OF AIR CONDITIONER UPTO Gas charging of air conditioner upto 1.5ton capacity with job involved transportation of machin e to vendors' works. Checking of all components for leak by charging co2 gas & finally evacuating the compressor completely & charge s of refrigerant gas - 22. AGas charging of air conditioner upto 1.5ton capacity with job involved transportation of machine to
10
1872
2209.73
... More
Supplying and fixing following rating, double pole, (single phase neutral), 240 volts, residual current circuit breaker (RCCB/ELCB), ISI marked, having a sensitivity current indicated miliamperes in the existing MCB DB complete with connections, testing and commis sioning etc. as required. Note: ISI marked RCCB/ELCB shall be used. 40 amps,, 300 mA40 amps,, 300 mA
5
1907
2251.19
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Automatic AC Volt meter (Automatic Electric make or approved equivalent) 96 mm x 96 mm square type block backalite case/flush mounting AC Volt meter/range 0-600 accuracy +/-2.5%.Aut omatic AC Volt meter (Automatic Electric make or approved equivalent) 96 mm x 96 mm square
15
1261
1488.68
... More
WBM ROAD / CONCRETE BREAKING: WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) as per specifications and direction of the Site Engineer, job complete in all respects including the cost of labour, tools, materials, load, lift hire cha rges of equipments, if any.
10
4699
5544.83
... More
Angle Valve (JAQUAR-563) Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent)
10
3262
3849.87
... More
Providing earthing with copper plate as per IS: 3043 standard / drawing / specification with plate size 600 mm x 600 mm x 3 mm plate materials tinned copper plated with drilled hole at centre to receive 50 mm long 13 mm bolt, nut and double washer screwing system with copper tape/copper flexible. The tape/flexible shall be inside 1 1/2" dia GI pipe length from copper plate to the system to be earthed. The Plate shall be burried at a minimum depth of 4.5 Mtr below ground level on its edge and 2 Mtrs away from building/equip ment foundation and shallbe connected to the equipment. The size of the copper flexible shall be not less than 19 mm x 1.6 mm. The i tem includes labour and materials all complete (but without coke or charcoal and salt). Charcoal and salt cost will be paid seperate ly as extra.Providing earthing with copper plate as per IS: 3043 standard / drawing / specification wit
5
9383
11072.66
... More
Supply of OFC Jointing kits as per tender specifications
2
7099
8376.82
... More
PROVIDING COPPER LUGS FOR MAINTENANCE Supply of copper tube terminal heavy duty (crimping cable lug) of KSE / Dowells make or equiva lent certified by EIC. of the following sizes. 20 sqmm20 sqmm
50
11
13.05
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on bot h faces of shutters : 35mm thick with SS butt hinges 35 mm thick including ISI marked Stainless Steel butt hinges with necessary scr ews
10
3516
4149.98
... More
Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Charge.
100
107
127.02
... More
Hydraulic testing of CO2 Cylinders inclusive of all taxes ( 2 to 4.5 Kg/Cm2)
45
234
276.43
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] :With float glass panes of 4.00 mm thickness
10
1162
1371.82
... More
Supply and fixing of wind socks on the position including all labour, tolls and tackels as per direction of Engineer-in-Charge inclu sive of all taxes.
30
764
902.66
... More
Supply of 200 gm CO2 cartridges
50
605
713.99
... More
Premium acrylic emulsion paint (Interior Grade): Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Vo latile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying add:One coat One co at
300
87
103.06
... More
Lighting Works Supply and fixing of below given white cover plate with frame for mosaic wiring accessories of M/s MDS or approved eq uivalent inlcuding supply and fixing of nuts, bolts, etc. complete with labour and materials as per direction of the Engineer-in-Cha rge:8 module8 module
5
181
213.97
... More
Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper shape, raking o ut joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable area outside Ow nder's premises, all complete as per directions of the Engineer-in-Charge : With CM1:4 (Fine Sand) With cement mortar 1:4 (1 cement : 4 fine sand)
50
485
573.37
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Thermal Relays type L&T MN2 or equivalent with si ngle phasing protection - 9.0 - 15.0 A (Direct operated) as per direction of Engineer-in-Charge.Thermal Relays type L&T MN2 or equiv alent with single phasing protection - 9.0 - 15.0 A (Direct op
5
7624
8996.34
... More
CPVC Piping (Internal Work-Concealed): Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fi : 20mm nominal dia pipes 20 mm nominal dia pipes
50
556
656.2
... More
Supply, fixing and connection of following equipments in panels including small mechanical works and supply of all fixing materials. All complete with labour and materials as per the direction of Engineer-in-Charge Power Contactor (Upto 2NO + 2 NC)- Above 25 Amp b ut upto 45 Amp (AC3) for AC standard coil voltage - 110, 220, 240, 415 V, 50Hz Type MNX45 of L&T or equivalentPower Contactor (Upto 2NO + 2 NC)- Above 25 Amp but upto 45 Amp (AC3) for AC standard coil voltage
5
6344
7487.06
... More
Supplying, installing, testing and commissioning of TPN tap off box of following capacity on the existing rising mains and complete with HRC fuse links, interconnections, earthing etc. as required. 63 A TPN63 A TPN
1
10341
12203.41
... More
Supply, installation, testing & commissioning of following Ex-e/ weather proof junction boxes of FCG/Baliga make, suitable for light ing distribution including supply of steel structure, Elemax terminal blocks suitable for terminating upto 25 sqmm PVC A1. cables, w elding, painting etc. All complete with labour and materials as per drawings, specifications and directions of Engineer-in-Charge. M ulti way Ex-e, WP Junction box with flanged cover of following internal dimensions:300 x 300 x 125 with IP 66 protection300 x 300 x 125 with IP 66 protection
10
7619
8991.43
... More
Providing salt and charcoal for plate earth electrode as required. 240 kg coke and 5 kg salt240 kg coke and 5 kg salt
5
3030
3575.64
... More
Supply of Optical Smoke Detectors along with all mounting & other accessories as per the tender specifications.
12
2998
3538.64
... More
Supply, fixing and connection of Philips/approved equivalent make tube light fittings alongwith tubes (tubes cost will be paid separ ately) and control gear the necessary control gear fully wired up and fixing on existing TW varnished double board round blocks on w all including supply & fixing of round blocks, lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge..TYPE TMC 501/136 (HPF) mounting rail for LED lampsTYPE TMC 501/136 (HPF) mounting rail for LED lam ps
5
3735
4408.34
... More
PCC-Up to Plinth Level: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shut tering - All work up to plinth level :1:1.5:3 (Coarse Sand & Aggregate-20mm) 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggreg
5
8386
9895.54
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Raipur, Chhattisgarh