Chhattisgarh State Industrial Development Corporation Limited Tender
... More
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
Chhattisgarh State Industrial Development Corporation Limited - CSIDC Tender
Electrical Works
Opening Date9 May 2025
Closing Date29 May 2025
Tender Amount₹ 30,00,00,000
Technical
Technical
Financial
Work Experience Requirements
... View More
The required prior work experience for the bidder includes having completed satisfactorily one of the following: (a) One similar work costing not less than INR 24.00 Crs, or (b) Two similar works costing not less than INR 15.00 Crs each. The bidder must also have experience in key activities, including earthwork, GSB+WMM, DBM+BC, RCC Drain, street light pole with LED lights, and D.I pipeline of 100 mm & above dia. No specific value or percentage of similar works completed is mentioned. Detailed monetary values related to prior work experience are INR 24.00 Crs and INR 15.00 Crs.
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid capacity = (A*N*M - B) The variables used in the formula are defined as follows:
- A = Maximum value of all civil engineering work executed in “any one financial year” during the last five year (updated to the price level at the current financial year at the compounded rate of 10% a year taking into account the completed as well as work in progress.)
- N = Number of years prescribed for completion of the works for which tender is invited (period up to 6 months to be taken as half-year and more than 6 months as one year). Any period beyond 12 months, the period actually mentioned in the N.I.T. shall be considered.
- M = 2.5
- B = Value of existing commitments and on-going works to be completed during the period of completion of the work for which tender is invited (period up to 6 months to be taken as half-year and more than 6 months as one year). Any period beyond 12 months, the period actually mentioned in the N.I.T. shall be considered.
Costs
EMD
₹ 30,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Infrastructure Development Works Including Roads, Drainage, Culverts, Water Supply System, Parking Area Development,
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
168237Tender No
168237Tender Authority
Chhattisgarh State Industrial Development Corporation Limited ViewPurchaser Address
-Website
http://eproc.cgstate.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Granular Sub-base as per Table:- 400-1
Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401
A)Plant mix method (with Mechanically stone only)
(a) for Lower Sub-base with
(ii) Grading IV Material
Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401
A)Plant mix method (with Mechanically stone only)
(a) for Lower Sub-base with
(ii) Grading IV Material
8935.25
-
-
... More
Providing and Laying ductile iron mechanical joint collar with follower glands conforming to IS-9523/2000 having dimension as per table 24 of IS-9523/2000 in the nominal diameter/sizes with external bitumen and internal cement mortar lining.
150mm dia-
150mm dia-
3
-
-
... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).
3.5 x 95 sq. mm.
3.5 x 95 sq. mm.
175
-
-
... More
Providing following size ISI marked FRLS PVC insulated , PVC sheathed, flexible copper conductor wire.
2.5 sq. mm three core
2.5 sq. mm three core
1344
-
-
... More
Providing and laying damp proof course (upto 50mm thick) with plain
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed
stone aggregate 20mm nominal size) including form work.
cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed
stone aggregate 20mm nominal size) including form work.
3.54
-
-
... More
Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.
125x2.5mm (heavy)
125x2.5mm (heavy)
99
-
-
... More
32 mm nominal bore
8
-
-
... More
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material including dewatering etc. complete.
Ordinary soil
Upto 3 m depth
Ordinary soil
Upto 3 m depth
2385.12
-
-
... More
Providing and fixing in position tar paper bearing for slab as per approved drawings and specification.
348.72
-
-
... More
Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:
Cement Mortar 1:5 (1 cement : 5 coarse sand)
Cement Mortar 1:5 (1 cement : 5 coarse sand)
2063.87
-
-
... More
Earth work in soft rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling with excavated soil in trench / pit to ground level complete as per specification
16
-
-
... More
Providing and fixing bright finished brass door handles with brass polished MS screws complete:
125 mm
125 mm
170
-
-
... More
Filler joint. Providing and fixing in position 20 mm thick premoulded joint filler ( 12 m long x 30 cm deep ) in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications.
71.22
-
-
... More
Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick:
Bijsal, Haldu, Benteak, Khair (16mm thick panel)
Bijsal, Haldu, Benteak, Khair (16mm thick panel)
25.8
-
-
... More
Plain cement concrete complete as per drawing and Technical Specifications. PCC Grade M 20
305.74
-
-
... More
Providing and fixing PVC ball valve for inlet / outlet of rain Water harvesting pipe and filter. 110mm
40
-
-
... More
Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
2466.07
-
-
... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)
7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long.
7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long.
20
-
-
... More
Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand,4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre)
1000
-
-
... More
Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area).
8540
-
-
... More
Providing and fixing 40mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area)
Teak wood
Teak wood
68.31
-
-
... More
15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).
156.47
-
-
... More
100x100mm-
4
-
-
... More
Labour for cutting following Ductile iron pipes of any type and class 100mm dia-
10
-
-
... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.
9 metre high.
9 metre high.
84
-
-
... More
18/20 watt {4 feet}
50
-
-
... More
Providing and making 12mm thick cement plaster of mix: in cement mortar 1:5(1 cement : 5 fine sand)
3345.11
-
-
... More
Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
6 amps to 32 amps
6 amps to 32 amps
250
-
-
... More
Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix
In Cement Mortar 1:6 (1 cement : 6 fine sand)
In Cement Mortar 1:6 (1 cement : 6 fine sand)
3250.97
-
-
... More
3 X 2.5 sq. mm in 20mm conduit
950
-
-
... More
Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification
2
-
-
... More
Long body bib cock (500 grams)
56
-
-
... More
Providing of Core cut with suitable size as per specification at site. (22.6X0.1X0.2)=
50
-
-
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc. complete & i/c its removal at all levels for: foundation, footing, base of column and plinth beam in any shape & size.
31681.3
-
-
... More
150mm dia-
650
-
-
... More
Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments.
1200 mm sweep
1200 mm sweep
98
-
-
... More
Extra Long Point I
12
-
-
... More
Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
White pedestal type
White pedestal type
17
-
-
... More
Providing and fixing frosted glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows, ventilators: 5 MM THICK
76.65
-
-
... More
Long Point
12
-
-
... More
Extra for double leaf shutter instead of single leaf.
25.8
-
-
... More
Filling with Murum/river sand for pipe bedding of over the pipe including supply.
434.94
-
-
... More
Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401A) Plant mix method (with Mechanically crushed stone only) (a) for Lower Sub-base with
(i) Grading –III Material.
(i) Grading –III Material.
10168.86
-
-
... More
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.
120 watt
120 watt
148
-
-
... More
Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification.
12
-
-
... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. M-20 Grade
2620.39
-
-
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc. complete & i/c its removal at all levels for: foundation, footing, base of column and plinth beam in any shape & size. Spiral/Folded plate type stair cases including risers and landing
104.38
-
-
... More
With 3 metre long GI Pipes and 50 kg back filling compound.
8
-
-
... More
Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification.
Analoge type
Analoge type
4
-
-
... More
Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
4
-
-
... More
Providing and fixing flush door shutters decorative type, core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.. 35 mm. thick (single leaf)
122.91
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
1. Coupler (110 mm)
1. Coupler (110 mm)
40
-
-
... More
Supplying, fitting and placing HSD (High Strength Deformed Steel) bar reinforcement in super-structure complete as per drawing and technical specifications
@160 Kg/M3 of R.C.C. Qty i.e. 14.022 M3
@160 Kg/M3 of R.C.C. Qty i.e. 14.022 M3
28.05
-
-
... More
Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as per specification.
50
-
-
... More
Finishing walls with water proofing cement paint of required shade to give an even shade.
On new work (Two or more coats applied @ 3.84 kg/10 sqm)
On new work (Two or more coats applied @ 3.84 kg/10 sqm)
678.2
-
-
... More
40 mm dia. nominal bore
89.1
-
-
... More
Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
3 X 1.5 sq. mm in 20mm conduit
3 X 1.5 sq. mm in 20mm conduit
350
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom, kitchen etc., by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation:
i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
i) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours.
ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
68.2
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification.
20
-
-
... More
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge
54.45
-
-
... More
Providing and fixing M.S. sheet top cover for rolling shutter 1.25mm thick
39.38
-
-
... More
Providing and making 12mm thick cement plaster of mix:
In cement Mortar 1:3 (1 cement : 3 fine sand)
In cement Mortar 1:3 (1 cement : 3 fine sand)
56.61
-
-
... More
Providing and fixing 600x120x5mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete.
10
-
-
... More
Extra Long Point II
8
-
-
... More
Providing following size ISI marked FRLS PVC insulated , PVC sheathed, flexible copper conductor wire.
1.5 sq. mm three core
1.5 sq. mm three core
160
-
-
... More
Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:
For Ground Floor
For Ground Floor
428.93
-
-
... More
Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification.
52
-
-
... More
Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter).PVC door shutter.
17.33
-
-
... More
Providing and making 6mm thick cement plaster of mix : In Cement mortar 1:4 (1 cement : 4 fine sand)
Chhajja
Chhajja
1027.02
-
-
... More
Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.
10 watt {2 feet}
10 watt {2 feet}
10
-
-
... More
32 mm nominal outer dia. Pipes.
183.2
-
-
... More
Providing and Laying ductile iron double socket 450 Bends conforming to IS – 9523/2000 having dimension as per table 15 of IS-9523/2000 in the following nominal diameter/ sizes with external bitumen coating and internal cement mortar lining.(laying conforming to IS 12288 : 1987)
150mm dia-
150mm dia-
2
-
-
... More
Providing and applying 2mm thick ready mix exterior grade putty (Birla wall care, Alltek Superfine W/R of (NCL), J.K. wall putty) on walls to make the surface smooth and even.
5247.32
-
-
... More
Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.
33075.13
-
-
... More
3½ X 25 sq. mm (25 mm)
10
-
-
... More
Providing and fixing following ductile iron single chamber triple function temper proof air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS:13095-1991.
100mm dia-
(SOR I/4.50 of P/21) Amendment
100mm dia-
(SOR I/4.50 of P/21) Amendment
3
-
-
... More
400/5 amps
3
-
-
... More
315/5 amps
3
-
-
... More
200 amps
1
-
-
... More
150 x 10 mm
60
-
-
... More
Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board including drilling holes on the board, screws, connections etc. as per specification. (Thimbeling shall be paid separately).
100 amps
100 amps
18
-
-
... More
180x150 mm size P type
3
-
-
... More
Extra Long Point II
4
-
-
... More
Brick work with modular FLY ASH lime bricks (flag brick) confirming to ISI 12894:2002 of class designation 40 in foundation and plinth in:
Cement Mortar 1:5 (1 Cement : 5 Coarse Sand)
Cement Mortar 1:5 (1 Cement : 5 Coarse Sand)
370.66
-
-
... More
Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
250x16mm
250x16mm
33
-
-
... More
Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification.
45 cm long
45 cm long
98
-
-
... More
Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer.
7.98
-
-
... More
Providing and fixing ball bearing for rolling shutters.
28
-
-
... More
Extra for Polyester powder coated (minimum 50 micron) aluminium sections instead of anodized.
same as item of alumunium fixed and shutter.
same as item of alumunium fixed and shutter.
2996.25
-
-
... More
8 way, Double door
4
-
-
... More
150 mm dia
40
-
-
... More
Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.
Size above 200x300mm
Size above 200x300mm
725.45
-
-
... More
Installation of split type Inverter/Non Inverter Air Conditioner unit, cooling unit on wall inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification. (Extra length of copper piping and power cable shall be paid extra on linear basis)
24
-
-
... More
Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately)
4mm thick
4mm thick
7.8
-
-
... More
Plastering 15 mm thick on brick work/ CC surface with cement mortar 1:4 (1 cement : 4 fine sand) at all levels.
16
-
-
... More
150 mm dia pipe.
87
-
-
... More
Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 4mm thick anchor plate, 4 nos 24mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)
9 metre high, dia 155mm at bottom and 90mm at top, base plate size 260x260x16mm, foundation bolts 750mm long.
9 metre high, dia 155mm at bottom and 90mm at top, base plate size 260x260x16mm, foundation bolts 750mm long.
84
-
-
... More
40 mm nominal bore
8
-
-
... More
Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg/ sqm for receiving cement concrete floor including roughening cleaning etc complete.
933.2
-
-
... More
Carriage by mechanical transport upto 5 km lead: Earth
490.85
-
-
... More
25 mm dia. nominal bore
600
-
-
... More
3 pole MCCB, 125A, Adjustable Thermal - Magnetic Release, 25KA
5
-
-
... More
4. Clamp (110 mm)
240
-
-
... More
Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide.
37490.8
-
-
... More
Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete.
121.65
-
-
... More
100mm dia-
2
-
-
... More
Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.
187
-
-
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc. complete & i/c its removal at all levels for: foundation, footing, base of column and plinth beam in any shape & size.
For Coloumn, Pillars, Piers and Likes Rectangular or square in shape.
For Coloumn, Pillars, Piers and Likes Rectangular or square in shape.
6496.84
-
-
... More
Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
200 mm diameter
200 mm diameter
40.6
-
-
... More
Towel ring (150 mm dia)
24
-
-
... More
Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.
250x12mm
250x12mm
33
-
-
... More
Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
Short Point
Short Point
83
-
-
... More
Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centring and shuttering (with 40mm nominal size graded stone aggregate)
In foundation and plinth
M-10
In foundation and plinth
M-10
2.94
-
-
... More
Providing and fixing glass panes in glazed or paneled and glazed shutters of doors and window, clearstory windows etc (Only area of glass panes to be measured).
8mm thick
8mm thick
18.81
-
-
... More
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawing including cost of binding wire in foundation and plinth all complete. Thermo-Mechanically treated bars FE 415
771527
-
-
... More
Providing and fixing stainless steel drain jali of approved make/quality
66
-
-
... More
Providing, laying and jointing socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (class K-9) conforming to IS 8329/2000 with suitable Rubber Gasket (Push on) joints as per IS:5382/2018 including testing of joint (laying conforming to IS12288:1987)
100mm dia-
100mm dia-
2050
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
Plain reducing Tee 110x75mm
moulded fittings/ accessories having 3.2mm wall thickness for Rigid
PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring
conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
Plain reducing Tee 110x75mm
45
-
-
... More
150 mm diameter S.W. pipe
44.6
-
-
... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1)
3.5 x25 sqmm
3.5 x25 sqmm
3750
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
EXTERNAL WORK
32 mm nominal outer dia pipes
EXTERNAL WORK
32 mm nominal outer dia pipes
40
-
-
... More
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification sections 1500, 1600 and 1700 (Newly laid concrete shall be covered by gunny bags).
A RCC Grade M25
I For Solid Slab Super Structure
(a) Using Concrete Mixer
(i) Height upto 5m
A RCC Grade M25
I For Solid Slab Super Structure
(a) Using Concrete Mixer
(i) Height upto 5m
175.37
-
-
... More
Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete.
250 x10mm
250 x10mm
33
-
-
... More
Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)
4 way Double door
4 way Double door
10
-
-
... More
15 mm thick Table rubbed polished Granite stone slab flooring laid over
20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement slurry including rubbing and
polishing etc. complete. (Area of slab should be 0.50 sqm and above)
Granite stone grey/pink
20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse
sand) laid and jointed with grey cement slurry including rubbing and
polishing etc. complete. (Area of slab should be 0.50 sqm and above)
Granite stone grey/pink
28.22
-
-
... More
Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete.
ABC Fire Extinguisher 4KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 2A, 89B. With all accessories.
ABC Fire Extinguisher 4KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 2A, 89B. With all accessories.
24
-
-
... More
Brick work with well burnt chimney bricks having crushing strength not less than 25 kg/cm2 and water absorption not more than 20% above plinth level up to four meter height including cons of form work.
14.4
-
-
... More
Medium Point
165
-
-
... More
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thickness if required and as per relevant clauses of section- 200. (A)In Light Jungle
5.43
-
-
... More
25 mm nominal bore
24
-
-
... More
For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).
2017.35
-
-
... More
Providing and Laying ductile iron mechanical joint collar with follower glands conforming to IS-9523/2000 having dimension as per table 24 of IS-9523/2000 in the nominal diameter/sizes with external bitumen and internal cement mortar lining.
100mm dia-
100mm dia-
10
-
-
... More
Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminum alloy sheet reflector zed with high intensity retro-reflective sheeting of Micro prismatic grade type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.6 over a designed support system of aluminum alloy or galvanized steel trestles and trusses of sections and type as per structural design requirements and approved plans)
B. Aluminum Alloy plate for over head sign
B. Aluminum Alloy plate for over head sign
169.2
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
CONCEALED WORK including cutting chases and making good the walls etc.,
15 mm nominal outer dia. Pipes.
CONCEALED WORK including cutting chases and making good the walls etc.,
15 mm nominal outer dia. Pipes.
20
-
-
... More
Providing & fixing of Ductile iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of joining material such as bolts, nuts, rubber insertion etc. all complete.(Steel Spindle)
150mm dia-
150mm dia-
2
-
-
... More
Extra for every additional lift of 1.5 m or part there of Ordinary or hard rock
54.2
-
-
... More
Stop cock (concealed) (600 grams)
84
-
-
... More
Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter.
2
-
-
... More
3 X 4 sq. mm in 25mm conduit
80
-
-
... More
3½ X 95 sq. mm (38 mm)
12
-
-
... More
Extra Long Point I
8
-
-
... More
Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:
3.12.4 Cold twisted bar / Hot rolled deformed steel.
3.12.4 Cold twisted bar / Hot rolled deformed steel.
1130.4
-
-
... More
Supplying and installing following size powder coated, perforated M.S. cable trays with perforation not more than 17.5% rigidly suspended from the ceiling with M.S. suspenders at a distance not more than 2.5 metre and near every junction/ joint etc complete as per specification.
225 mm width X 50 mm depth X 1.6 mm thickness
225 mm width X 50 mm depth X 1.6 mm thickness
125
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design:
100 mm diameter S.W. pipe
100 mm diameter S.W. pipe
200
-
-
... More
Construction of Sub Grade with Material Obtained from Borrow Pits/Borrow Area (Construction of sub-grade with approved material/selected soil having C.B.R.>8 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2).
25013.73
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:
Bib cock (400 grams)
Bib cock (400 grams)
60
-
-
... More
Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:
Flat back half stall urinal of size
460x380x250mm
Flat back half stall urinal of size
460x380x250mm
56
-
-
... More
Providing 1st class bedding below pipes with graded sand or other granular materials passing through 5.6 mm sieve as per clause 2904.
111.6
-
-
... More
Extra Long Point III
10
-
-
... More
For First Floor
134.05
-
-
... More
Providing and Laying ductile iron PN-16 type flanged spigot conforming to IS- 9523/2000 heaving dimension as per table 24 of IS-9523/2000 in the nominal diameter/ sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. (laying conforming to IS 12288 : 1987)
200mm dia-
150 mm
200mm dia-
150 mm
7
-
-
... More
Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:
214
-
-
... More
Providing and fixing wooden board of suitable size (18''x 24'') for energy meter etc complete as per specification.
15
-
-
... More
Dense Bituminous Macadam (Providing and laying dense bituminous macadam with minimum 40-60 TPH capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects.)
B) With mechanical paver finisher.
(ii) for Grading II (26.5 mm nominal size bitumen content 4.50%).
B) With mechanical paver finisher.
(ii) for Grading II (26.5 mm nominal size bitumen content 4.50%).
1827
-
-
... More
Toilet paper holder
28
-
-
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, as per clause 406.
6167.57
-
-
... More
3 X 6 sq. mm in 25mm conduit
95
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
18.76.2 110 mm dia pipe.
18.76.2 110 mm dia pipe.
723
-
-
... More
Long Point
18
-
-
... More
Providing and Laying Duclite Iron Tee Branch Frange Conforming to IS-9523/2000 having dimension as per table 21 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. (laying Conforming to IS 9523/200) (All sizes in mm)
150x100mm -
150x100mm -
1
-
-
... More
Extra Long Point III
4
-
-
... More
Supplying of approved make Hiwall split Inverter type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 5 metre of copper piping with insulation etc complete as per specification:
2.0 Ton split type Inverter AC {5 Star}
2.0 Ton split type Inverter AC {5 Star}
24
-
-
... More
Providing and fixing penal mounting following rating analog type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.
0-200 amps
0-200 amps
2
-
-
... More
32 mm nominal bore
14
-
-
... More
Steel work welded in built up sections/ framed work including cutting,
hoisting, fixing in position and applying a priming coat of red oxide zinc
chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
hoisting, fixing in position and applying a priming coat of red oxide zinc
chromate primer.
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
5700
-
-
... More
Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5)
25 mm
25 mm
75
-
-
... More
Providing & Laying Ductile Iron Double Socket Reducer Conforming to IS-9523/2000 having dimension as per table 21 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. (laying Conforming to IS 12288 : 1987) (All sizes of mm)
150x100mm -
150x100mm -
2
-
-
... More
3 pole MCCB, 250A, Adjustable Thermal - Magnetic Release, 35KA
1
-
-
... More
200 amps
1
-
-
... More
40 mm nominal bore
8
-
-
... More
15 mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:5(1 cement :5 fine sand)
16472
-
-
... More
Providing and fixing metal clad, TP&N switch fuse unit (re-wirable), 415/500 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately).
100 amps
100 amps
2
-
-
... More
Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
36
-
-
... More
Neat Cement punning.
56.61
-
-
... More
Providing and laying of a reinforced cement concrete pipe duct, 300mm dia across the road (new construction), extending from drain to drain in cuts and toe of slopes to toe of slopes in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipes as per IRC: 98-2011, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipes at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98-2011 and approved drawings.
(i) Single Row for one utility service
(i) Single Row for one utility service
120
-
-
... More
Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :
16
-
-
... More
Plain cement concrete complete as per drawing and Technical Specifications. PCC Grade M 15
83.68
-
-
... More
Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
63 amps
63 amps
19
-
-
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC: 35-1997. The finished surface to be level, uniform and free from streaks and holes.)
1065.75
-
-
... More
3. Bend (110 mm)
100
-
-
... More
Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete.
CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve.
CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve.
24
-
-
... More
110 mm
135
-
-
... More
PLASTER
12mm thick cement plaster in single coat including finishing even, smooth and curing including cost of form work complete.
12mm thick cement plaster in single coat including finishing even, smooth and curing including cost of form work complete.
56.8
-
-
... More
Extra for every additional lift of 1.5 m or part there of All types of soil
110.86
-
-
... More
Supplying and fixing of double over hang (Arm) 1500 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI
44
-
-
... More
3 pole MCCB, 160A, Adjustable Thermal - Magnetic Release, 25KA
1
-
-
... More
Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification.
28
-
-
... More
Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.
200 amp (30x5mm)
200 amp (30x5mm)
13
-
-
... More
5 x 6 Sq.mm
95
-
-
... More
Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.
110 mm outer dia
110 mm outer dia
125
-
-
... More
3 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 25KA
1
-
-
... More
Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, testing and commissioning as per direction of Engineer.
Note : E/w to be measured and paid separately
100 mm dia
Note : E/w to be measured and paid separately
100 mm dia
40
-
-
... More
Supplying and fixing of single over hang (Arm) 1000 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI
20
-
-
... More
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification.
450
-
-
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc. complete & i/c its removal at all levels for: foundation, footing, base of column and plinth beam in any shape & size. Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)
1978.37
-
-
... More
5. Steel Khila (One Site)
20
-
-
... More
Extra Long Point I
4
-
-
... More
2. Single tee without door (110 mm)
80
-
-
... More
1/4
45
-
-
... More
Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.
20
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification.
250
-
-
... More
Health foscet (hand jet) with flexible connection pipe (for WC)
28
-
-
... More
15mm thick Granite work (machine cut, table rubbed & mirror polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) mixed with matching pigment. (Area of slab should be over 0.5 sqm).
Granite stone black
Granite stone black
92.58
-
-
... More
Providing and fixing at all height false ceiling consisting of frame work
266.31
-
-
... More
Providing and laying Reinforced Cement Concrete pipe NP 3 / prestressed concrete pipe on first class bedding. (Laying Reinforced cement concrete pipe NP3 /prestressed concrete pipe for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets).
B 600 mm dia
B 600 mm dia
240
-
-
... More
Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete: 125x85x5.50mm (Heavy Type)
210
-
-
... More
Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of renches, refilling the same and testing of joints complete:
32 mm dia. nominal bore
32 mm dia. nominal bore
146.4
-
-
... More
Hand shower set with flexible extension pipe
32
-
-
... More
Providing and Laying Duclite Iron All socket Tees Conforming to IS-9523/2000 having dimension as per table 21 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. (laying Conforming to IS 12288 :1987) (All sizes in mm)
150x100mm-
150x100mm-
2
-
-
... More
4 x 16 sq. mm.
450
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)
7
-
-
... More
Extra for providing and fixing 4mm thick glass strip in joints of Terrazo floor/ cement concrete floor or like.
40 mm wide
40 mm wide
453.6
-
-
... More
Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification.
Upto 300 mm deep.
Upto 300 mm deep.
13
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
EXTERNAL WORK
40 mm nominal outer dia pipes
EXTERNAL WORK
40 mm nominal outer dia pipes
122
-
-
... More
Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming of red oxide zinc chromate primer.
1345.8
-
-
... More
Earth work in Excavation for pipe trench in ordinary soil areas including dressing, watering and ramming and disposal of Excavated earth lead up to 50 meters and lift up to 1.5, disposal earth to be leveled, neatly dressed
2185.48
-
-
... More
Providing and fixing on wall surface G.I. pipes medium class complete
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete:
15 mm dia. nominal bore
with G.I. fittings and clamps, including cutting, making good the walls etc.
and testing of joints complete:
15 mm dia. nominal bore
80
-
-
... More
25 mm nominal outer dia. Pipes.
80
-
-
... More
Providing and fixing 12mm thick, 100mm wide pelmet with 6mm thick top cover, 20mm dia nickel plated M.S. pipe heavy duty curtain rod and bracket including fixing with 10cm long 25x3mm M.S. flat, rawl plugs, screws etc complete. TEAK WOOD
58.3
-
-
... More
Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. (Size- 1.1 x 0.4 x 0.12)
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement ortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement ortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
1046.7
-
-
... More
Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :
White Size 550x450 mm
White Size 550x450 mm
42
-
-
... More
Sand Filling in Foundation Trenches as per Drawing & Technical Specifications.
136.13
-
-
... More
Painting on new work (two or more coats) to give an even shade with: Premier Shynthci Enamel Paint
142.43
-
-
... More
6 X 2.5 sq. mm in 25mm conduit
750
-
-
... More
3.5 x 50 sqmm
750
-
-
... More
Providing and making 18mm thick cement plaster in two coats with
under layer of 12mm thick plaster 1:5 (1 cement : 5 fine sand) and top
layer of 6mm thick with cement plaster 1:3 (1 cement : 3 fine sand)
finished rough with sponge.
under layer of 12mm thick plaster 1:5 (1 cement : 5 fine sand) and top
layer of 6mm thick with cement plaster 1:3 (1 cement : 3 fine sand)
finished rough with sponge.
325.68
-
-
... More
Supplying and fixing of single over hang (Arm) 1500 MM (long)x50 mm dia decorative GI street light pole bracket made out of GI
40
-
-
... More
Supplying of Metal
20.88
-
-
... More
Long Point
294
-
-
... More
Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.
50 mm internal dia
50 mm internal dia
75
-
-
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
26.1
-
-
... More
Providing and laying Cast-in-situ cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm including mixing with mechanical mixer, compacting with vibrator, finishing and currying etc. complete but excluding form work.
16
-
-
... More
Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorized sign as per IRC:67-2012 made of Micro prismatic grade type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing).
25.2
-
-
... More
Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)
4 way, Double door
4 way, Double door
4
-
-
... More
16 sqmm (63 amp)
32
-
-
... More
Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core / lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as per specification. .
25 Sq mm.
25 Sq mm.
752
-
-
... More
300 mm sweep
12
-
-
... More
Providing and fixing in position doors,windows and ventilators frame made of cold rolled pressed steel sheet framed profiles made from commercial M.S Sheets confirming to I.S 513 of 1973 and as per general specification of I.S 4351 including hunges jamb,lock jamb ,s teel butt hinges base tie,joints mitred and welded with 10 cm long legs of size 15x 3mm M.S flat embedded in cement concrete blocks 15 x 10 x 10 cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer.
single rebate/mulliuon 100 mm x 50 mm sizes 1.25 mm thick sheet
single rebate/mulliuon 100 mm x 50 mm sizes 1.25 mm thick sheet
112.8
-
-
... More
3.5 x 120 sq. mm.
250
-
-
... More
200 amps
6
-
-
... More
Prime coat (Providing and applying primer coat with oil based Bitumine emulsion (SS-1, grade confirming to IS.8887) on prepared surface of granular Base including clearing of road surface and spraying primer suing mechanical means as per clause 502.
(i) on WBM/WMM surface @ 0.85 Kg/Sqm.
(i) on WBM/WMM surface @ 0.85 Kg/Sqm.
22837.5
-
-
... More
Providing and fixing brass/ gun metal gate valve with C.I. wheel of
approved quality (screwed end):
25 mm nominal bore
approved quality (screwed end):
25 mm nominal bore
8
-
-
... More
(ii) Double Row for one utility service
75
-
-
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc. complete & i/c its removal at all levels for: foundation, footing, base of column and plinth beam in any shape & size. Weather shade chhajja ,cornices and moundlings.
80.31
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing and panelling to be paid for separately
For Fixed Portion
For Fixed Portion
1306.5
-
-
... More
100mm dia-
8
-
-
... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 1 mm thick GI saddle as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1)
3.5 x 25 sq. mm.
3.5 x 25 sq. mm.
250
-
-
... More
Nahani trap 110x75mm
146
-
-
... More
Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification:
With 2 metre long GI Pipes and 25 kg back filling compound.
With 2 metre long GI Pipes and 25 kg back filling compound.
17
-
-
... More
Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.
60 watt
60 watt
10
-
-
... More
Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.
36 watt, size 600 x 600mm
36 watt, size 600 x 600mm
132
-
-
... More
Providing and filling in plinth with sand/crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidation each deposited layer by ramming and watering i/c dressing etc. complete.
12010.05
-
-
... More
Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
32 amps
32 amps
4
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification.
Deluxe
Deluxe
5
-
-
... More
Wall painting with acrylic luxury emulsion (plastic) paint of Required Shade to give an even shade. On new work( two or more coats)
3969.15
-
-
... More
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in PCC M20 grade on PCC M10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409)
1785
-
-
... More
Excavation for all types and sizes of foundations, trench and drain or for any other purpose including disposal of excavation stuff into 1.5 m lift and lead into 50 m ( at least 5m away from the excavated area ), including dressing and leveling of In all types of soil
In ordinary rock
In ordinary rock
54.2
-
-
... More
140 mm outer dia
175
-
-
... More
Bottle trap set with extension pipes
24
-
-
... More
Tack coat Providing and applying tack coat with bitumen emulsion (RS-1, grade confirming to IS.8887) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per clause 503.
(ii) (Granular surface trated with primes @ 0.30 kg / Sqm).
(ii) (Granular surface trated with primes @ 0.30 kg / Sqm).
22837.5
-
-
... More
Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
Medium Point
Medium Point
18
-
-
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm
nominal size).
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm
nominal size).
2120.64
-
-
... More
150 mm
87
-
-
... More
150mm dia-
1
-
-
... More
32 mm
150
-
-
... More
6 way Double door
6
-
-
... More
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications 710.1.4 of I.R.C. 78 and 2200.
326.16
-
-
... More
Providing and making 18 mm terrazzo finish plastering rubbed and polished complete with under layer of 12mm thick cement plaster 1:3 (1 cement : 3 fine sand) and top layer of 6mm thick white or black or white and black marble chips of 3mm and down size laid in proportion of 4:7 (4 cement : 7 Marble chips) by volume.
255
-
-
... More
Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.
160.11
-
-
... More
Providing and laying vitrified floor tiles with double charge/multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.
Size 600x600mm
Size 600x600mm
1269.6
-
-
... More
Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height.
314.16
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.
Sal, bijasal, benteak, khair, haldu
Sal, bijasal, benteak, khair, haldu
1.48
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)
4
-
-
... More
Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification.
102
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)
3
-
-
... More
Providing & laying mechanically mixed cement concrete 20mm maximum size graded crushed stone excluding const of centring & shuttering
M-15
M-15
1.89
-
-
... More
Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete:
200 x10 mm
200 x10 mm
67
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
36000
-
-
... More
Providing & laying precast interlocking concrete blocks of minimum compressive strength of 300 kg/sq.cm and approved size , shape/ pattern over coarse sand bed of thickness upto 40 mm and joints thick filled with fine sand including leveling with surface vibrator, temping and sweeping etc. complete as per IRC-SP-63-2004
80mm thick Plain precast interlock concrete block.
80mm thick Plain precast interlock concrete block.
27255.5
-
-
... More
Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminum alloy sheet reflector zed with high intensity retro-reflective sheeting of Micro prismatic grade type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.6 over a designed support system of aluminum alloy or galvanized steel trestles and trusses of sections and type as per structural design requirements and approved plans)
A. Truss and Vertical Support
A. Truss and Vertical Support
7.5
-
-
... More
Providing and fixing 3 pole, 415/500 volts following rating (AC-1 Duty) power contactor in existing starter/ cubical panel including, connections, testing and commissioning etc. as per specification.
100 amps
100 amps
4
-
-
... More
Providing and placing in position cold twisted or un-coated HYSD steel bar and hot rolled deformed steel Reinforcement for R.C.C, work i/c cutting bending, binding etc. complete i/c cost of binding wire and wastage
1. Sub Structure.
1. Sub Structure.
174.84
-
-
... More
Digital type
2
-
-
... More
Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan)
98
-
-
... More
Supplying of Wooden Coal
3.8
-
-
... More
Providing and fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colors, shades over 20 mm thick bed of cement Mortar 1;3 (1 cement: 3 coarse send) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment complete.
85.02
-
-
... More
Supplying, installation, testing and commissioning of following LED Bulk Head fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP65
10 watt
10 watt
5
-
-
... More
Compacting Original Ground Compacting Original Ground supporting embankment Loosening, leveling and compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at O.M.C. and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction.
10926.67
-
-
... More
Soap dish plate
20
-
-
... More
Making connection of G.I. distribution branch in G.I. main of following
sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured)
25 mm nominal bore
sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured)
25 mm nominal bore
8
-
-
... More
Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
150x100 mm size P type
150x100 mm size P type
8
-
-
... More
250 x 16 mm
16
-
-
... More
Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
3
-
-
... More
Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting, watering rolling and royalty charges etc. complete.
A) With vibratory roller.
A) With vibratory roller.
1415.49
-
-
... More
Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
Tee/ Tee with door/ Bend 45°/ Bend 90°
75 mm
Tee/ Tee with door/ Bend 45°/ Bend 90°
75 mm
45
-
-
... More
Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:
2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes.
2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes.
376.6
-
-
... More
Applying priming coat on wood work with ready mixed primer.
22.49
-
-
... More
Supplying and fixing on surface/ recess vertical type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, with 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland/ knock out plate, provision for 63/100 amp MCCB as incomer including interconnection between incomer MCCB and busbars, earthing etc. as per specification. (But without MCCB and MCB) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
4 way (4 + 12), Single door with provision for 100 amps MCCB as incomer
4 way (4 + 12), Single door with provision for 100 amps MCCB as incomer
2
-
-
... More
Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification.
Fan regulator (two module size) electronic stepped type moving all rounds
Fan regulator (two module size) electronic stepped type moving all rounds
98
-
-
... More
Angle valve for basin mixer and geyser points (450 grams)
8
-
-
... More
Extra for providing modular starter in power point wiring instead of modular 32 amp SPMCB and 16 amps socket outlet as per specification.
36
-
-
... More
80 mm internal dia
75
-
-
... More
Land Scaping & Gardening including Chain link Fencing filling of soil arrangement of Watering & Maintenance for 05 years at Pharmaceutical Park, Sector-22, Nava Raipur, Atal Nagar (C.G.).
86586
-
-
... More
100mm dia-
20
-
-
... More
Chamfering ductile iron pipes of all types and classes to make suitable for tyton joints.
80 mm to 150 mm dia
100mm dia-
80 mm to 150 mm dia
100mm dia-
8
-
-
... More
Excavation in Soil (by Mechanical Means.)
Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300.
Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300.
71014.21
-
-
... More
Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification.
200/5 amps
200/5 amps
3
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing
cistern (same colour) conforming to IS : 7231, with flush bend and
other fittings and fixtures complete including cutting and making good
the walls and floors wherever required :
Coloured Orissa pattern W.C. pan of size 580x440 mm
cistern (same colour) conforming to IS : 7231, with flush bend and
other fittings and fixtures complete including cutting and making good
the walls and floors wherever required :
Coloured Orissa pattern W.C. pan of size 580x440 mm
12
-
-
... More
20 mm nominal outer dia. Pipes.
20
-
-
... More
SP MCB 25 amp
36
-
-
... More
Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.
150 mm
150 mm
66
-
-
... More
Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS frade 304
132
-
-
... More
Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per
manufacturers recommendation and injecting for pre-constructional
curative cum preventive anti-termite treatment:(Five year service
guarantee bond to be signed by contractor)
Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm
manufacturers recommendation and injecting for pre-constructional
curative cum preventive anti-termite treatment:(Five year service
guarantee bond to be signed by contractor)
Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm
260.64
-
-
... More
Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete:
15 mm nominal bore
15 mm nominal bore
8
-
-
... More
Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in surface complete as per specification and IS: 9537 (2000 Part 5)
25 mm
25 mm
125
-
-
... More
Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.
40 mm thick
coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.
40 mm thick
125.4
-
-
... More
Supplying, installation, testing andcommissioning of following capacity diesel Generating Set (alternator directly coupled to diesel engine) compete in all respect broadly comprising of following and as per specification.
A. Alternator : Self excited, brush less type, of following capacity, 3 phase, 415 volts 50 Hz, 4 pole, AC alternator complete with all accessories.
B. Engine : water cooled diesel engine of suitable BHP for rated alternator at 1500 rpm, turbo charged, direct injection type, 4 stroke, 4/6 cylinder including specified size fuel tank of approved design and shape duly calibrated and painted with one coat of primer and two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust MS pipe (upto 2 metre beyond silenser) duly wrapped with asbestos rope of legging of specified quality and specification.
C. AMF Panel : Cubical, compartmentalized, AMF panel board with all suitable size power and control contactors, switches, meters and other accessories, internal wiring, connection, inter-connection etc. for trouble free smooth functioning of DG Set complete with battery charger and leads as required.
D. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting etc. as required.
160 KVA
A. Alternator : Self excited, brush less type, of following capacity, 3 phase, 415 volts 50 Hz, 4 pole, AC alternator complete with all accessories.
B. Engine : water cooled diesel engine of suitable BHP for rated alternator at 1500 rpm, turbo charged, direct injection type, 4 stroke, 4/6 cylinder including specified size fuel tank of approved design and shape duly calibrated and painted with one coat of primer and two coats of synthetic enameled paint of approved colour, residential type silencer with exhaust MS pipe (upto 2 metre beyond silenser) duly wrapped with asbestos rope of legging of specified quality and specification.
C. AMF Panel : Cubical, compartmentalized, AMF panel board with all suitable size power and control contactors, switches, meters and other accessories, internal wiring, connection, inter-connection etc. for trouble free smooth functioning of DG Set complete with battery charger and leads as required.
D. Base Plate : Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting etc. as required.
160 KVA
1
-
-
... More
Providing and fixing 150mm Antique/S.S. finished brass floor door stoppers with rubber cushion and antique/ S.S. Polished MS screws to suit thickness of shutters thickness.
35
-
-
... More
Providing and laying Design mix reinforced cement concrete with crushed graded stone aggregate 20 mm nominal size using batching plant,transit mixer and concrete pump,in all works upto plinth level excluding cost of form work.
M-25 grade
M-25 grade
562.98
-
-
... More
Providing and fixing of aluminium tile false ceiling comprising of Tile of size 600 x 600mm x 0.7mm. The Tile ends will be raised with pips and stops to ensure positive engagement into the spring to enable for demounting of individual panels. The Tile sides will be sufficiently high to ensure a minimum deflection across the length of Tile. All Tiles will be bevel edged. The Tile shall be powder coated. The Tile shall be clipped into clip-in profile made of 0.5mm thick G.I sheet. The clip-in profile shall be supported from slab by means hold on clamp with clip and 4mm dia G.I. rod fixed to ceiling rigidly.
Wall trim box of size 15x30x15mm made from 0.4mm thick aluminium alloy sheet to be provided all along the wall to hold panels
(only surface area of false ceiling is to be measured and no deductions for lights, diffusers, columns etc shall be made)
With perforated tiles having perforation with 2.5mm dia and 5mm center to center and pasted with non woven tissue on the back side
Wall trim box of size 15x30x15mm made from 0.4mm thick aluminium alloy sheet to be provided all along the wall to hold panels
(only surface area of false ceiling is to be measured and no deductions for lights, diffusers, columns etc shall be made)
With perforated tiles having perforation with 2.5mm dia and 5mm center to center and pasted with non woven tissue on the back side
489.83
-
-
... More
Supplying of following 230/250 volts LED Flood light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Seperate housing for driver etc complete as per specification and P.A. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.
300 watt
300 watt
48
-
-
... More
50 mm nominal bore
8
-
-
... More
Supply and fixing of approved make wall mounting type voltage stabilizer with input volts 160-250, output volts 200-240 volts and double step relay on desired location with necessary fixing material including connection etc complete as per specification.
5 KVA
5 KVA
24
-
-
... More
Supply, connecting and fixing extra length of copper piping for split type air conditioners of following dia and approved quality with insulation sleave etc complete as per specification
5/8
5/8
25
-
-
... More
100mm dia-
4
-
-
... More
Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
Short Point
Short Point
4
-
-
... More
Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)
120
-
-
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as per specification.
50
-
-
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
5mm thick mirror
5mm thick mirror
29.08
-
-
... More
Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.
144
-
-
... More
15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above) GRANITE STONE BLACK
320.84
-
-
... More
Designing and providing suitable and approved size RCC foundation for 12-30 mere high mast including seel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as required including laying and fixing HM foundation bolts with tam plates but excluding the cost of foundation bolts with tam plates etc complete as per specification
15
-
-
... More
Providing and fixing 27.5cm long wire spring for rolling shutters.
28
-
-
... More
Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
20
-
-
... More
50 mm nominal outer dia pipes
81
-
-
... More
Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm M.S flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification , IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).
3.5 x 70 sqmm
3.5 x 70 sqmm
50
-
-
... More
Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification.
4 X 16 sq. mm (22 mm)
4 X 16 sq. mm (22 mm)
15
-
-
... More
Medium Point
15
-
-
... More
Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.
Analog type
Analog type
2
-
-
... More
Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:4 (1 cement : 4 fine sand)
13920
-
-
... More
Providing and fixing metal clad, TP&N double break fuse switch unit (HRC), 415/500 volts, with H.R.C. fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately).
100 amps
100 amps
3
-
-
... More
Providing and fixing Anitque/S.S. finished brass door latch with necessary Antique/S.S. POlished MS screws complete: 300 x16x5 mm
68
-
-
... More
1/2
45
-
-
... More
Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2).
59333.54
-
-
... More
32 mm
100
-
-
... More
Providing and fixing M.S. fan clamp/ hook for ceiling fan made out of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop.
44
-
-
... More
Bituminous Concrete (Providing and laying bituminous concrete with minimum 40-60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.0 to 6.0% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with senS.O.R control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects)
(B) With mechanical paver finisher.
(i) for Grading I (19 mm nominal size) with Bitumen 5.5%
(B) With mechanical paver finisher.
(i) for Grading I (19 mm nominal size) with Bitumen 5.5%
913.5
-
-
... More
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications.
(a) Using concrete mixer
(i) PCC Grade M20
(a) Using concrete mixer
(i) PCC Grade M20
503.31
-
-
... More
Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification.
9
-
-
... More
Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work . 1:2:4
1262.94
-
-
... More
Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
110 mm
110 mm
36
-
-
... More
Distempering with acrylic washable distemper to give an even shade. On new work (Two or more coats)
498.48
-
-
... More
Two way bib cock (800 grams)
4
-
-
... More
Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral).
30x5mm (200 amps)
30x5mm (200 amps)
20
-
-
... More
Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB
6
-
-
... More
Extra Long Point III
12
-
-
... More
Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. GRANITE WORK
117.1
-
-
... More
3 pole MCCB, 160A, Adjustable Thermal - Magnetic Release, 25KA
1
-
-
... More
Supplying, installation, testing and commissioning of following LED fitting (luminaries) down lighters in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.
18/20 Watt
18/20 Watt
44
-
-
... More
50 Sqmm
16
-
-
... More
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.
3 pole MCCB, 250A, Adjustable Thermal - Magnetic Release, 25KA
3 pole MCCB, 250A, Adjustable Thermal - Magnetic Release, 25KA
1
-
-
... More
200x150mm -
1
-
-
... More
Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.
63 mm outer dia and 50 mm Inner dia
63 mm outer dia and 50 mm Inner dia
3700
-
-
... More
Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry.
75.32
-
-
... More
Half brick thick Brick Masonary with FLY ASH lime bricks (flag brick) confirming to ISI 12894:2002 of class designation 40 in super Strcture above plinth level Cement Mortar 1:4 (1 cement : 4 coarse sand)
229.99
-
-
... More
Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete:
300x16 mm
300x16 mm
56
-
-
... More
Supplying erection testing and commissioning of hot dipped galvanised (single dip 86 micron) 20 metre High mast pole on existing RCC foundation with all accessories and equipments, detailed as below to withstand wind pressure upto 180km/hr and minimum following specifications:
a) HM shaft made of not more than 2 sections of suitable lengths with telescopic stressfit joints between sections without any circumpherencial welding, sheet thickness 4mm top and bottom sections, nominal dia 460mm on bottom and 150 mm on top, base plate 30mm thick 670mm dia, PCD of foundation bolts 650mm.
b) Double drum winch for lowering & raising of lantern carriage on high mast with operatable with power tool/ manual handle attachment with a torque limiting device for safe locking of carriage.
c) Raising/lowering type lantern carriage designed to carry specified nos of luminaries, control gear box, junction box.
d) Top pulley assemble with weather proof cover.
e) 3 Nos suitable length and size stainless steel wire ropes (minimum 6mm dia and 7/19 construction) for lowering & raising of lantern carriage.
f) Suitable size and length multicore flexible copper power trailing cable (minimum 3 core 4 sqmm)
g) Hinged service door in base section
h) Base plate earthing terminal.
i) Suitable arrangement for supply distribution with termination of suitable
size underground cable in high mast.
j) Lightning conductor finial made of 25mm dia 300 mm long G.I. tube having single prong.
k) Anchor plate of size 750x750x6mm, tem-plates 3mm thick, GI foundation bolts 12 Nos of 30 mm dia 850 mm long (EN 8 Grade) along with nuts washers etc.
(RCC fooundation and luminaries will be paid separately)
a) HM shaft made of not more than 2 sections of suitable lengths with telescopic stressfit joints between sections without any circumpherencial welding, sheet thickness 4mm top and bottom sections, nominal dia 460mm on bottom and 150 mm on top, base plate 30mm thick 670mm dia, PCD of foundation bolts 650mm.
b) Double drum winch for lowering & raising of lantern carriage on high mast with operatable with power tool/ manual handle attachment with a torque limiting device for safe locking of carriage.
c) Raising/lowering type lantern carriage designed to carry specified nos of luminaries, control gear box, junction box.
d) Top pulley assemble with weather proof cover.
e) 3 Nos suitable length and size stainless steel wire ropes (minimum 6mm dia and 7/19 construction) for lowering & raising of lantern carriage.
f) Suitable size and length multicore flexible copper power trailing cable (minimum 3 core 4 sqmm)
g) Hinged service door in base section
h) Base plate earthing terminal.
i) Suitable arrangement for supply distribution with termination of suitable
size underground cable in high mast.
j) Lightning conductor finial made of 25mm dia 300 mm long G.I. tube having single prong.
k) Anchor plate of size 750x750x6mm, tem-plates 3mm thick, GI foundation bolts 12 Nos of 30 mm dia 850 mm long (EN 8 Grade) along with nuts washers etc.
(RCC fooundation and luminaries will be paid separately)
3
-
-
... More
Providing and laying nominal mix reinforcement cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
3868.37
-
-
... More
Providing weep holes in Brick masonry/ Plain/ Reinforced concrete abutment, wing wall/return wall with 100 mm dia. AC pipe, extending through the full width of the structure with slope of 1 V: 20 H towards drawing face. Complete as per drawing and Technical specifications section 2706 and 2200.
410
-
-
... More
Providing and Laying ductile iron double socket 900 Bends conforming to IS – 9523/2000 having dimension as per table 15 of IS-9523/2000 in the following nominal diameter/ sizes with external bitumen coating and internal cement mortar lining.(laying conforming to IS 12288 : 1987)
150mm dia-
150mm dia-
2
-
-
... More
Above 300 mm and upto 450 mm deep
4
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
INTERNAL WORK - EXPOSED ON WALL
15 mm nominal outer dia .Pipes.
INTERNAL WORK - EXPOSED ON WALL
15 mm nominal outer dia .Pipes.
30
-
-
... More
Supplying, installation, testing and commissioning of following sizes fancy exhaust fan having built in louvers in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9
225 mm sweep
225 mm sweep
10
-
-
... More
Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.
6 amps to 32 amps
6 amps to 32 amps
148
-
-
... More
Painting on new work (two or more coats) to give an even shade with: Satin synthetic enamel paint
252.38
-
-
... More
Providing and fixing formwork i/c centering, shuttering, strutting, staging, propping bracing etc. complete & i/c its removal at all levels for: foundation, footing, base of column and plinth beam in any shape & size.
8401.31
-
-
... More
Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring.
80x1.25mm M.S. Laths
80x1.25mm M.S. Laths
84
-
-
... More
Providing and making suitable CC pole collar (muffing) in Cement Concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) of size 0.4 m dia and 0.4 m height from existing CC foundation.
104
-
-
... More
Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.
3 pole MCCB, 25-100A, Adjustable Thermal Release, 18KA
3 pole MCCB, 25-100A, Adjustable Thermal Release, 18KA
6
-
-
... More
Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :
4
-
-
... More
Design construction and Testing of R.C.C. Sump Well including design, drawing and approval from authority etc. complete as directed by Engineer-in Charge including providing & installation ISI marked (Kirloskar/Siemens/Crompton/Jyoti) three numbers pump sets (each pump set shall pump 50000 litres per hour), 40m head connected with suitable armored aluminium cable to panel board having fully automatic star delta motor starter fitted with CRCA sheet steel enclosure suitable for 3 phase 415V, 50Hz AC motor pump set of required capacity with ISI marked Kirloskar/ Siemens/ Crompton suitable capacitor, ampere meter, voltmeter, 3 phase indicator and single phase preventor with legrand mark ISI mark MCB etc complete, foot valve, NRV, sluice valve with RCC chamber and RCC heavy duty chamber cover with frame as required size & necessary fittings mentioned in approved design and drawing etc. complete (on turn key basis) work also include pump house cum panel
Room size 3mx3m and 3m height.
Capacity 500 KL (02 No.)
Room size 3mx3m and 3m height.
Capacity 500 KL (02 No.)
1000000
-
-
... More
Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads)
P.C.C. M-15
P.C.C. M-15
2215.4
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 5 mm thickness
With float glass panes of 5 mm thickness
65.16
-
-
... More
Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated copper conductor wire lead of length upto 50cm including providing copper thimbles on both ends as per specification (To be measured separately for each phase/ neutral).
10 sqmm (32 amp)
10 sqmm (32 amp)
80
-
-
... More
Brick work with modular FLY ASH lime bricks (Falg brick) confirming to ISI 12894:2002 of class designation 40 in foundation and plinth in:
Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)
Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)
386.87
-
-
... More
3 pole MCCB, 400A, Adjustable Thermal - Magnetic Release, 35KA
1
-
-
... More
Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.
For Elevation Purpose
For Elevation Purpose
34.24
-
-
... More
Excavation for all types and sizes of foundation, trenches and drains or for any other purpose i/c disposal of excavated stuff up to 1.5m lift and lead up to 50 m (at least 5m away from the excavated area),i/c dressing and leveling of pits.
24786.79
-
-
... More
100x100mm -
2
-
-
... More
Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.
75 mm dia pipe.
75 mm dia pipe.
2361
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.
9.6
-
-
... More
Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:
Drip course
Drip course
97.2
-
-
... More
3½ X 120 sq. mm (45 mm)
12
-
-
... More
Extra Long Point II
15
-
-
... More
Filling available excavated earth in trenches, plinth sides of foundation in layers not exceeding 20cm. in depth including consolidation of each layer by ramming watering. Lead up to 50m and lift up to 1.5m in all kinds of soils
2128.87
-
-
... More
Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:
On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
34708.79
-
-
... More
For Second Floor
10.58
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%