Chhattisgarh Housing Board Tender

BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.

Chhattisgarh Housing Board - CGHB Tender

Civil And Construction

Building Construction

Raipur, Chhattisgarh

Opening Date1 Sep 2022

Closing Date9 Sep 2022

Tender AmountRefer Documents

Notes

Download

Costs

EMD
₹ 10,00,000
Document Cost
Refer Documents
Tender Fee
Refer Documents

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Construction Of Ground + 5 Storied Commercial Cum Residential Building Including Internal Water Supply, Sanitary Fittings, Electrification Work, Fire Fighting, & Development Work With External Water Supply Line, Sump Well, Pump House, Septic Tank, Sewerage System, Road, Culvert, Drain, Interlocking Pavers, Garden Development, Boundary Wall, Entrance Gate At G.e. Road, Tatibandh Raipur (c.g) (4 Penthouse, 20 3bhk, 18 2bhk & 29 Shops With Land Development Work)

Contact

Tender Id
108090
Bid Award Id
View
Tender No
108090
Tender Authority
Chhattisgarh Housing Board View
Purchaser Address
-
Website
http://www.cghb.gov.in

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Extra for every additional lift of 1.5 m or part there of.

Quantity2066.45

Rate-

Amount -

Extra for every additional lift of 3.0 m or part there of.

Quantity381.65

Rate-

Amount -

Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

Quantity-

Rate-

Amount -

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size).

Quantity357.09

Rate-

Amount -

25mm thick Local RAJIM/ Red Flag stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey cement slurry mixed with pigments to match the shade of the stone i/c grinding, rubbing and polishing.

Quantity970.75

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

Quantity-

Rate-

Amount -

Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

Quantity4852.32

Rate-

Amount -

Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M.

Quantity1417.69

Rate-

Amount -

Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

Quantity192.91

Rate-

Amount -

Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

Quantity-

Rate-

Amount -

1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size).

Quantity3071.66

Rate-

Amount -

Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation, plinth and at any floor all complete:

Quantity-

Rate-

Amount -

Thermo-Mechanically treated bars FE 415 D

Quantity454034.92

Rate-

Amount -

Make :- Tata/Sail/Jindal/Goel/GK/Fortune/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and laying water proofing treatment in sunken portion of WCs, bathroom, kitchen etc., by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation:

Quantity630.76

Rate-

Amount -

i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 including rounding off junction of vertical and horizontal surface.

Quantity-

Rate-

Amount -

ii) 2nd course of 20mm cement plaster 1:3 (1 mixed with water proofing compound including rounding off junction ofcement : 3 coarse sand) vertical and horizontal surface.

Quantity-

Rate-

Amount -

iii) 3rd course of applying blown or residual bitumen applied hot @ 1.7 Kg. per sqm of area.

Quantity-

Rate-

Amount -

iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg. per sqm of area.

Quantity-

Rate-

Amount -

Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

Quantity-

Rate-

Amount -

Cement Mortar 1:5 (1 cement : 5 coarse sand)

Quantity1055.94

Rate-

Amount -

6mm thick cement plaster of mix:

Quantity-

Rate-

Amount -

In Cement mortar 1:4 (1 cement : 4 fine sand)

Quantity14178.78

Rate-

Amount -

12mm thick cement plaster of mix:

Quantity-

Rate-

Amount -

In Cement mortar 1:5 (1 cement :5 fine sand)

Quantity13511.64

Rate-

Amount -

15mm thick cement plaster on the rough side of single or half brick wall of mix:

Quantity-

Rate-

Amount -

In Cement Mortar 1:5 (1 cement : 5 fine sand)

Quantity10541.47

Rate-

Amount -

Distempering with acrylic washable distemper to give an even shade.

Quantity2063.63

Rate-

Amount -

Make : Asian/ICI Dulux/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete.

Quantity31851.54

Rate-

Amount -

Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with: On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Quantity6915.37

Rate-

Amount -

Make : Asian/ICI Dulux/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Painting on new work (two or more coats) to give an even shade with: Premium synthetic enamel paint

Quantity901.6

Rate-

Amount -

Make : Asian/ICI Dulux/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m)

Quantity-

Rate-

Amount -

Granite stone black

Quantity1593.5

Rate-

Amount -

Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Quantity-

Rate-

Amount -

Granite work

Quantity48

Rate-

Amount -

Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).

Quantity36

Rate-

Amount -

Make :- Hindalco/Nalco/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4 mm thickness

Quantity4.5

Rate-

Amount -

Make :- Sant Gobin/Modi/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete. S.S. Wire Mesh

Quantity269.82

Rate-

Amount -

Providing and fixing steel door made of angle iron of suitable sizes with M.S. grill of approved pattern made of M.S. flats or square or round bars coat of red oxide zinc chromate primer.

Quantity74.39

Rate-

Amount -

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

Quantity7756.52

Rate-

Amount -

Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 'coarse sand : 4 graded stone aggregate 20mm) finished with a floating 'coat of neat cement.

Quantity-

Rate-

Amount -

75 mm thick

Quantity961.98

Rate-

Amount -

Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

Quantity-

Rate-

Amount -

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).

Quantity64.91

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Columns, Pillars, Piers and likes- rectangular or square in shape

Quantity2601

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ)

Quantity4778.35

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Beams, lintels, cantilevers & walls

Quantity5398.02

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Stair cases of all types excluding spiral and folded plate type, including risers and landings

Quantity237.05

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Weather shade, chhajja, Cornices and mouldings

Quantity186.13

Rate-

Amount -

Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Wall of any thickness including attached pilasters, buttresses etc. in super structure.

Quantity107.52

Rate-

Amount -

Extra for additional height every 1m or part thereof where height of staging for form work exceeds 4.0 metre with adequate bracing, propping etc at all levels, for suspended floor, roof, landing, beam and balcony. (only plan area is to be measured):

Quantity205.64

Rate-

Amount -

Extra for providing fixing and removing of propping from lower floor upwards for the concreting. Propping should be provided two floors below. The props of lower floor must be 50% of the props of the floor above including wedging etc. complete. In case propping is done in one floor below, only half the rate shall be paid.

Quantity205.64

Rate-

Amount -

Extra for unsupported individual columns with height more than 4.0 m from the immediate lower level in every floor.(full area of column is to be paid)

Quantity37.65

Rate-

Amount -

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

Quantity-

Rate-

Amount -

G. Floor

Quantity262.77

Rate-

Amount -

F.F. Floor

Quantity211.98

Rate-

Amount -

Second floor

Quantity265.18

Rate-

Amount -

Third floor

Quantity265.18

Rate-

Amount -

Fourth floor

Quantity265.18

Rate-

Amount -

Fifth floor

Quantity265.18

Rate-

Amount -

Sixth floor

Quantity138.59

Rate-

Amount -

7th floor

Quantity66.75

Rate-

Amount -

Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

Quantity-

Rate-

Amount -

Ground floor

Quantity225.96

Rate-

Amount -

First floor

Quantity108.06

Rate-

Amount -

Second Floor

Quantity139.2

Rate-

Amount -

Third Floor

Quantity139.2

Rate-

Amount -

Fourth Floor

Quantity139.2

Rate-

Amount -

Fifth Floor

Quantity139.2

Rate-

Amount -

Sixth Floor

Quantity125.49

Rate-

Amount -

7th Floor

Quantity14.25

Rate-

Amount -

Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:

Quantity4063.81

Rate-

Amount -

Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

Quantity-

Rate-

Amount -

First floor

Quantity637.7

Rate-

Amount -

Second Floor

Quantity783.59

Rate-

Amount -

Third Floor

Quantity783.59

Rate-

Amount -

Fourth Floor

Quantity783.59

Rate-

Amount -

Fifth Floor

Quantity783.59

Rate-

Amount -

Sixth Floor

Quantity291.77

Rate-

Amount -

Providing and fixing factory made uPVC white colour slidlrlg glazed window above 1.50 m 4iI h•ight dimension comprising of uPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasliet, wool pile, zinc alloy (white po nder coated) handle on one side of extreme panel along with zinc pJated mild steel multi point I ocking leaving transmission gear with ke•as, zinc alloy (white powder coated) toucMock with hook(if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion‘ welded at all comers, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frawie and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately vide chapter no. 9.51, 9.58, 9.59 Respectively). Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Quantity-

Rate-

Amount -

Three track three panels sliding window with fly proof SS wiremesh (Two nos. glazed &one no. wire mesh panels) made of (smallseries) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash

Quantity245.52

Rate-

Amount -

Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll footing process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if requii'ed), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of eKtreme panels along with zinc plated mild steel multi point locking having tr‹tnsmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 gtade) body with adjustable double nylon ro}1ers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profi ie of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall sh‹il1 be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per apprc» :d drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately vide chapter no. 9.51, 9.58, 9.59 Respectively). Note: For uPVC frame and sash extruded profiles minus 5*Zo tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Quantity-

Rate-

Amount -

Three track three panels slid:rig door with fly proof 3.S wire mesh (Two nos glazedSqm.65.32.55 Q one no. wire mesh panels) made of (big series) frame 1 16 x 45 mm & sash 46 x 82 , , mm both braving wall thickness of 2.3 + 0.2 mm and single glazing beads glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.60 sqm)

Quantity291.06

Rate-

Amount -

Providing and fixing glazing in aluminum door, window ventilator shutters and partitions etc with PVC/ neoprene gasket etc. complete (Cost of aluminum snap beading shall With float glass panes of 5 mm thickness be paid in basic item): Qty as per item no. 1

Quantity536.58

Rate-

Amount -

Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 304 STAIR CASE RAILING

Quantity5589.15

Rate-

Amount -

Providing wood work in frames of doors windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, chair, haldu

Quantity13.44

Rate-

Amount -

Providing and fixing 30mm thick panelled or glazed or panelled and glazed shutter frames for doors excluding hinges and panelling. (Area of shutter to be measured without deducting panelling area) Teak wood

Quantity77.49

Rate-

Amount -

Providing and fixing flush door shutters to IS- 2202 (Part-1) interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf)

Quantity402.83

Rate-

Amount -

Make : Green board/National/Century/Bhimsariya already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 35mm thick paneled or glazed or paneled and glazed shutter frames for doors excluding hinges and paneling. (Area of shutter to be measured without deducting paneling area) Bijasal, benteak, khair, haldu

Quantity16.4

Rate-

Amount -

Providing and fixing paneling in paneled or paneled and glazed shutters for doors etc. (only area of paneling to be measured). Paneling for or paneled and glazed shutters 25 mm to 40 mm thick: Bijsal, Haldu, Benteak, Khair (16mm thick panel)

Quantity16.4

Rate-

Amount -

Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). Both side Pre-laminated panel PVC door shutter

Quantity162.97

Rate-

Amount -

Make : Sintex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and laying French sprit polish on new wood work after preparing the surface by rubbing down smooth with sand papers, covering the knots, if visible applying a coat of wood filler cleaning the surface applying 50 or more coats of French spirit polish till the surface gives high gloss.

Quantity1326.02

Rate-

Amount -

Providing and fixing SS finished brass butt hinges with SS polished SS screws complete. 125x85x5.50 mm (Heavy Type)

Quantity828

Rate-

Amount -

Providing and fixing SS finished brass Tower bolts (Barrel type) with SS polished necessary stainless steel screws etc complete. 250x10mm

Quantity276

Rate-

Amount -

Providing and fixing SS finished brass door handles with SS polished necessary stainless steel screws etc complete. 125 mm

Quantity764

Rate-

Amount -

Providing and fixing SS finished brass door latch with SS polished necessary stainless steel screws etc complete. 250mm

Quantity490

Rate-

Amount -

Providing and fixing SS Finished brassl sliding door bolts with 16mm rod, SS polished necessary stainless steel screws etc complete. 250mm

Quantity278

Rate-

Amount -

Providing and fixing SS finished brass hanging door stopper with necessary stainless steel screws complete. Double

Quantity276

Rate-

Amount -

Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanized M.S screws including drilling holes in masonry work /CC/ R.C.C by drilling machine and making good etc complete. 50 mm long

Quantity828

Rate-

Amount -

Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.

Quantity840

Rate-

Amount -

Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring 80x0.90mm M.S. Laths size 2.90

Quantity413.7

Rate-

Amount -

Providing and fixing 27.5cm long wire spring for rolling shutters.

Quantity46

Rate-

Amount -

Providing and fixing ball bearing for rolling shutters.

Quantity92

Rate-

Amount -

Providing and fixing M.S. sheet top cover for rolling shutter

Quantity145.5

Rate-

Amount -

Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: Drip course

Quantity805.6

Rate-

Amount -

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing withcement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Quantity389.1

Rate-

Amount -

Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height.

Quantity2255.85

Rate-

Amount -

Providing and laying vitrified floor tiles with double charge/ multi charge printing with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) including grouting the joints with white cement andmatching pigments etc. complete tiles (Size 600X600mm)

Quantity4304.53

Rate-

Amount -

Make :- RAK/Kajariya/Orient/Nitco/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size above 200x300mm

Quantity1828.83

Rate-

Amount -

Make :- RAK/Kajariya/Orient/Nitco/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete Size 300x300mm

Quantity491.28

Rate-

Amount -

Make :- RAK/Kajariya/Orient/Nitco/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade On new work (two or more coats)

Quantity24153.5

Rate-

Amount -

Make : Asian/ICI Dulux/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI,Nerolac, J.K. wall putty) on walls to make the surface smooth and even.

Quantity29829.71

Rate-

Amount -

Neat Cement punning.

Quantity499.02

Rate-

Amount -

Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 5 km (earth measured in stacks will be reduced by 20% for payment). Satin synthetic enamel paint

Quantity200

Rate-

Amount -

Rough dressing the trenched ground including breaking clods.

Quantity400

Rate-

Amount -

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.

Quantity400

Rate-

Amount -

Fine dressing the ground

Quantity400

Rate-

Amount -

Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: selection grass (well developed)

Quantity400

Rate-

Amount -

Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Hedges like Alife, Dorenta, Tikoma etc

Quantity520

Rate-

Amount -

Planting of Trees and their Maintenance for one Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia. holes, 1 m. deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year) soil, base plantation, providing and spreading different fertilizers, soil and sand:

Quantity36

Rate-

Amount -

Excavation for roadway in soil using including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 meters as per relevant clauses of section 300.

Quantity353.24

Rate-

Amount -

Construction of granular sub-base by providing close graded Material, , carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401. Plant mix method, for grading- I Material

Quantity353.24

Rate-

Amount -

Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR ) P.C.C. M-10

Quantity112.14

Rate-

Amount -

Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads and ODR ) R.C.C. M-25

Quantity168.21

Rate-

Amount -

Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm Plain/ normal coloured precast interlock concrete block

Quantity1134.61

Rate-

Amount -

Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 150 mm dia pipe.

Quantity240

Rate-

Amount -

Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, testing and commissioning as per direction of Engineer. 200 mm Sewer Line

Quantity139.8

Rate-

Amount -

Providing and constructing brick masonry chamber for underground pipe and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) RCC cover of suitable size and 75mm thick with 1:1.5:3 mix (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including reinforcement 8mm dia bars at 150mm both ways and MS hooks for lifting, including foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :

Quantity-

Rate-

Amount -

Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :

Quantity24

Rate-

Amount -

Providing and constructing brick work for extra depth beyond 45 cm of brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) with inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls:

Quantity-

Rate-

Amount -

For 500x700 mm size

Quantity12

Rate-

Amount -

Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Quantity-

Rate-

Amount -

Inside size 90x80 cm and 45 cm deep including RCC cover with frame 450x600 mm internal dimensions.

Quantity45

Rate-

Amount -

Extra for depth for manholes

Quantity-

Rate-

Amount -

Size 90x80 cm

Quantity22.5

Rate-

Amount -

Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.. 40 mm thick

Quantity70

Rate-

Amount -

Finishing walls with water proofing cement paint to give an even shade. On new work (Two or more coats )

Quantity87.5

Rate-

Amount -

Make : Asian/ICI Dulux/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :

Quantity-

Rate-

Amount -

With 20x20 mm square bar

Quantity7

Rate-

Amount -

Supplying and fixing C.I. cover without frame for manholes :

Quantity-

Rate-

Amount -

455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

Quantity1

Rate-

Amount -

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :

Quantity-

Rate-

Amount -

For pipes 250 to 300 mm diameter

Quantity2

Rate-

Amount -

Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110 mm dia pipe.

Quantity3

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Vent covel

Quantity-

Rate-

Amount -

110 mm

Quantity1

Rate-

Amount -

Painting on new work (two or more coats) to give an even shade with: Black Japan paint

Quantity1.04

Rate-

Amount -

Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer.

Quantity46.9

Rate-

Amount -

12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:

Quantity-

Rate-

Amount -

Raised Band

Quantity5.3

Rate-

Amount -

Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 100x2.5mm (heavy)

Quantity6

Rate-

Amount -

Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 125 mm

Quantity4

Rate-

Amount -

Providing and fixing bright finished brass hanging door stopper with necessary brass finished MS steel screws complete.

Quantity1

Rate-

Amount -

Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels,for Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes

Quantity177.76

Rate-

Amount -

Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:Window sills, anchor blocks, string course, bends, copings, bed plates and like.

Quantity24.87

Rate-

Amount -

Providing and laying ceramic glazed floor tiles 300x300mm conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. In all colours except White, Ivory, Grey, Fume Red Brown,

Quantity3.56

Rate-

Amount -

Make :- RAK/Kajariya/Orient/Nitco/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable)

Quantity2

Rate-

Amount -

Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. 150 mm dia.

Quantity180

Rate-

Amount -

Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. 150 mm dia.

Quantity80

Rate-

Amount -

Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia

Quantity70

Rate-

Amount -

Make :- Tata/Jindal/Surya/already approved in board/ will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Development of tube well in accordance with IS: 2800 (Part I) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, i/c hire & labour charges of air compressor, tools & accessories etc. , all as per requirement and direction of Engineer-in charge.

Quantity10

Rate-

Amount -

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia

Quantity2

Rate-

Amount -

Providing and fixing wooden board of suitable size for energy meter etc complete as required.

Quantity5

Rate-

Amount -

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Quantity-

Rate-

Amount -

3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA

Quantity2

Rate-

Amount -

Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt ) as required

Quantity2

Rate-

Amount -

Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as required.

Quantity30

Rate-

Amount -

Supplying and laying following sizes one number PVC insulated/ XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as required.

Quantity-

Rate-

Amount -

4 x 16 Sqmm

Quantity30

Rate-

Amount -

Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as required

Quantity-

Rate-

Amount -

3x4.0 sqmm

Quantity230

Rate-

Amount -

Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as required.

Quantity-

Rate-

Amount -

5.0 HP, three phase

Quantity2

Rate-

Amount -

Supplying and fixing of following sizes 'B' class G I pipe with welded steel flange of suitable size at both the end of every pipe length, fixing with submersible pump and lowering with the pump in the bore well including necessary rubber gasket, nuts & bolts etc. as required.

Quantity-

Rate-

Amount -

50 mm dia.

Quantity250

Rate-

Amount -

Supply, installation, testing and commissioning of 5-7.5 HP 3 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. (a) Phase indicating lamps with fuses and toggle switches 1 set, (b) 5/7.5 HP 3 phase DOL starter with over load and no volt relay 1 No. (c) 32 A "C" curve TPMCB 1 No. (d) Voltmeter 0-500 V with selector switch 1 set. (e) Ammeter 0-10 A with CT's and selector switch 1 set.

Quantity2

Rate-

Amount -

Supply, installation, testing and commissioning of 10-15 HP 3 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. a) Phase indicating lamps with fuses and toggle switches 1 set b) 10/12.5/15 HP 3 phase automatic Star-delta starter with over load and no volt relay 1 No c) 32 A "C" curve TPMCB 1 No d) Voltmeter 0-500 V with selector switch 1 set e) Ammeter 0-10 A with CT's and selector switch 1 set.

Quantity2

Rate-

Amount -

Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 65 mm dia. nominal bore

Quantity10

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 50 mm dia. nominal bore

Quantity60

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Constructing masonry Chamber 60x60x75 cm, inside with modular wellburnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

Quantity2

Rate-

Amount -

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality:

Quantity-

Rate-

Amount -

65 mm diameter pipe

Quantity10

Rate-

Amount -

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality:

Quantity-

Rate-

Amount -

50 mm diameter pipe level.

Quantity60

Rate-

Amount -

Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) :

Quantity-

Rate-

Amount -

65 mm nominal bore

Quantity2

Rate-

Amount -

Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

Quantity-

Rate-

Amount -

65 mm nominal bore

Quantity1

Rate-

Amount -

Providing and fixing vitreous china water closet (European type W.C.pan) with white ISI marked plastic seat and lid, 10 litre low level white pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White wall hung type

Quantity62

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing water closet squatting pan (Indian type W.C. pan ),100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cisternsame colour) conforming to IS : 7231, with lushbend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm

Quantity44

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm

Quantity3

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe.

Quantity3

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required White Size 550x450 mm

Quantity106

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. White

Quantity106

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 560x410 mm bowl depth 215 mm.

Quantity42

Rate-

Amount -

Make : Nirali/Neelkanth/Jyna/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing cast iron grating for gully trap. 150x150mm square

Quantity8

Rate-

Amount -

Providing and fixing on wall face or under floor UV stabilizedUnplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete

Quantity1487

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing on wall face or under floor UV stabilizedUnplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete 110 mm dia pipe

Quantity1036

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Tee/ Tee with door/ Bend 45°/ Bend 90° 75mm dia pipe

Quantity546

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Quantity44

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Quantity28

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Quantity20

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Quantity354

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 75 mm

Quantity712

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Quantity284

Rate-

Amount -

Make : Supreme/finolex/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc.and testing of joints complete 25 mm dia. nominal bore

Quantity1206.4

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Quantity339.7

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing concealed in wall G.I. pipes medium class complete with G.I. fittings and clamps, including painting with anti corrosive bitumastic paint, cutting chases, making good the walls etc. and testing of joints complete: 15 mm dia nominal bore

Quantity1219

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured 50 mm nominal bore

Quantity147

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete 15 mm nominal bore

Quantity147

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete 25 mm nominal bore

Quantity147

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete 50mm nominal bore

Quantity13

Rate-

Amount -

Make : TATA/Jindal/Surya/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams)

Quantity57

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Long body bib cock (500 grams)

Quantity84

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Piller Cock (400 grams)

Quantity106

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Angle valve for basin mixer and geyser points (450 grams)

Quantity426

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Wall mixer with elegant knob (1400 grams)

Quantity104

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Soap dish plate

Quantity104

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Shower rose (revolving type) (150mm)

Quantity104

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Towel rail (600mm long x 20mm dia)

Quantity104

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Health foscet (hand jet) with flexible connection pipe (for WC)

Quantity104

Rate-

Amount -

Make : Hindware/Parryware/Jaguar/Kerovit/ Kohler/ already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Providing and fixing stainless steel drain jali of approved make/quality

Quantity272

Rate-

Amount -

Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore

Quantity192

Rate-

Amount -

Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design Ground Floor Toilet Line 100x100 mm size P type

Quantity16

Rate-

Amount -

Providing and constructing brick masonry chamber for underground pipe and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) RCC cover of suitable size and 75mm thick with 1:1.5:3 mix (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including reinforcement 8mm dia bars at 150mm both ways and MS hooks for graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets

Quantity38

Rate-

Amount -

Providing and fixing brass/ gun metal gate valve with C.I. wheel of 50 mm nominal bore approved quality (screwed end): 50 mm nominal bore

Quantity3

Rate-

Amount -

Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour:

Quantity-

Rate-

Amount -

45 CM length

Quantity212

Rate-

Amount -

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete

Quantity-

Rate-

Amount -

40 mm dia

Quantity148

Rate-

Amount -

Providing and fixing PVC waste coupling in wash basin/ sink.

Quantity-

Rate-

Amount -

40 mm

Quantity148

Rate-

Amount -

Trimix operation over RCC M-20 pumpable concrete i/c setting of channel shuttering online & Level, vibrating concrete, leveling with trimix surface vibro Vaccum dewatering with trimix vaccum pump, floating and further compaction with trimix skin floating disc, machine troweling using approved machinery before application of broom finish( finish the same to BROOM FINISH all complete i/c necessary curring, cutting the cured concrete for contraction/ expansion joints. (RCC M-20 reinforcement & cutting of concrete will be paid seperately)

Quantity1121.4

Rate-

Amount -

Groove cutting in RCC Road and flooring for hot/cold expansion joints of 25 mm deep and 5 mm thick in size complete as per directon of engineer-in charge.

Quantity216

Rate-

Amount -

Providing and laying in Position Bitumen Hot Sealing Compound for hot/ cold expansion joints etc in RCC road and flooring using grade "A" sealing compound as per direction of engineer -in charge.

Quantity216

Rate-

Amount -

Supplying, Installation, Testing and Commissioning of Crompton Greevs/Kirloskar Make 10 HP Open well monoblock Submersible electric pump set for water supply system having following capacity three phase, 415 volts AC indication motor and pump i/c channel iron base frame and connection of suction and delivery line etc. as required.

Quantity2

Rate-

Amount -

Make : Kirloskar/Texmo/already approved in board/ will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Supply, erection, jointing, testing & commissioning of "C" Class MS pipes (as per IS: 1239) including necessary specials such as tees, bends, flanges reducers etc., complete on wall/ ceiling. The pipes to be erected on wall or suspended from beams, RCC roof slabs with suitable size MS bars/ angle irons including painting of metal part except pipe line 100mm dia.

Quantity100

Rate-

Amount -

Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give aneven shade including surface preparation. 100 MM

Quantity100

Rate-

Amount -

Providing, installation, testing and valve of following sizes confirming to IS: 5312 complete with rubbercommissioning of dual plate non-return gasket, GI bolts, nuts, washers etc. as required. 100mm dia

Quantity2

Rate-

Amount -

Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS: 13095 of following sizes as 100mm dia

Quantity2

Rate-

Amount -

Providing and fixing C.I. double flanged sluice valves rated to PN 1.6 with C.I. Wheel bolts, nuts, washers 3mm thick insertion rubber gasket including matching flanges table E, complete. 100mm dia

Quantity2

Rate-

Amount -

Supplying and fixing swinging type First-Aid Hose Reel drum with MS construction spray painted in Post office Red colour, conforming to IS: 884 with upto date amendments, complete with brackets for fixing on wall, connections from riser with 25 mm dia MS/GI pipe and GM gate valve but excluding hose reel

Quantity14

Rate-

Amount -

Supplying and fixing 19mm dia 30 metre long high pressure polypropylene First-Aid Hose Reel

Quantity14

Rate-

Amount -

Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS: 5290 (Type - A) with blank Gunmetal cap and chain as required

Quantity14

Rate-

Amount -

Supplying and fixing 63 mm dia, 15 mtr long RRL hose pipe with 63 mm dia Male and Female Stainless Steel-IS: 3444 Grade-1 couplings duly binded with GI wire, rivets etc. conforming to IS: 636 (Type -A) as required.

Quantity14

Rate-

Amount -

Supplying & fixing 63 mm dia Stainless Steel IS: 3444 Grade-1 branch pipe with 20 mm dia (nominal internal) Gun Metal nozzle conforming to IS: 903, suitable for instantaneous coupling connection to connect hose pipe coupling as required

Quantity14

Rate-

Amount -

Supplying and fixing of MS hose cabinet box of made of 2 mm thick MS sheet and 40 x 40 x 5mm angle iron with front openable cover Having 6 mm thick glazed glass viewing window i/c necessary locking arrangement,on existing wall/ brick platform etc complete as required Size 600 mm x 600 mm x 500 mm

Quantity14

Rate-

Amount -

Supplying and fixing 2 way Fire Brigade Connection of cast iron body with 2 Nos. Gun metal male instantaneous inlet couplings complete with cap and chain conforming to IS: 904 including connection to existing MS pipe line complete as required

Quantity14

Rate-

Amount -

Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia and with necessary G.I. coupling, valve to be fitted on top of Air vessel or on wet riser as per specification.

Quantity2

Rate-

Amount -

Providing and fixing pressure switch with suitable for 1-10 Kg/cm2 including 12/15 mm Ø isolation valve, G.I. nipple, elbow, electrical connections setting of Cut-In and cut-Off pressure complete in all respects

Quantity2

Rate-

Amount -

Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement elbow etc. as per requirement in approved manner.in approved manner.

Quantity2

Rate-

Amount -

CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 3Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 34B. Complete with Hose Assembly and horn, locking arrangement, operation manual, bracket with two screw and sleeve

Quantity14

Rate-

Amount -

ABC Fire Extinguisher 4KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 2A, 89B. With all accessories.

Quantity14

Rate-

Amount -

Fire alarm Control panel (UL Listed) suitable for 50 addressable points (Detector & Devices). Comprising of the following system components: Operating units, Periphery boards, Power supplies,System enclosures, with battery backup 24hours and 30minutes,

Quantity1

Rate-

Amount -

Intelligent Addressable Type Manual Call Point: Intelligent Manual Fire Alarm Box is constructed of durable, molded and polycarbonate material that is matte finished in red with raised white lettering Single-action,Pull-down lever is down, until manually reset,Polarity insensitive via SureWireTM technology

Quantity14

Rate-

Amount -

Quantity14

Rate-

Amount -

Supplying , installation , testing and commissioning of electrical motor driven Jockey pump of horizontal centrifugal end suction closed coupled type of cast iron body, bronze impeller, SS 410 shaft with mechanical seal gland packing and capable to deliver 180LPM at 70 MWC.The pump shall be coupled to TEFC motor of suitableHPwith speed of 2900RPM and complete set shall mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd, RCC foundation( as recommended by manufacturer) and Foundation bolts etc.

Quantity2

Rate-

Amount -

Suppy, installation, testing & commissitioning and putting into operation and final testing of automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) 1981and fulfilling following requirments on turn key basis. A. Type : Passenger lift B. Load : 13 passenger/ 884 Kg C. Speed : 1.0 metre per second D. Contol : AC2 E. Operation : Microprosser based simplex collective selective with/without lift attendent F. Total rise : About 9 mtrs G. Landings : 4 All on same side H. Floors served : G,1,2,3 I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings J. Lift shaft size : About 2500 mm width X 1900 mm depth, finished with plaster (size as per actual site conditions) K. Lift car size : About 2000 mm width X 1100 mm depth L. Car entrance : Minimum Clear opening 900 mm wide X 2000 mm high protected with car door M. Landing entrance: Clear opening 900 mm wide X 2000 mm high protected with landing door N. Car door : Stainless steel /Glass Door two pannel telescopic/centre opening flush type O. Landing door : Stainless steel /Glass Door two pannel centre opening flush type P. Door operation: Automatic electric power operated door with infra red protection Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides R. Car floor : Hard wood covered with PVC/ marblex tiles S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium T. Car ventilation : Pressure fan with anodised aluminium grill U. Emergency lighting in car: Battery operated Emergency lighting in the lift car V. Intercom system : Battery operated Intercom system in lift car, machine room and control room W. Emergency alarm : Battery operated alarm bell system in lift car & contol room X. Position of machine room: Directly above the lift shaft Y. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room Z. Fire man switch : Fire man switch at main landing termanal

Quantity1

Rate-

Amount -

Make :- Otis/Kone/Thuyson/Eskey/Omega/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Add or deduct for providing all additional parts/ equipments or for enhancing the capacity of parts/ equipments in automatic lift for 13 persons, speed 1.0 m/sec for every additional floor beyond initial G+3 floors.

Quantity4

Rate-

Amount -

Suppy, installation, testing & commissitioning and putting into operation and final testing of MACHINE ROOM LESS TYPE automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) 1981and fulfilling following requirments on turn key basis. A. Type : Passenger lift B. Load : 6 passenger/ 408 Kg C. Speed : 1.0 metre per second D. Contol : AC2 E. Operation : Microprosser based simplex collective selective with/without lift attendent F. Total rise : About 9 mtrs G. Landings : 4 All on same side H. Floors served : G,1,2,3 I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings J. Lift shaft size : About 1800 mm width X 1680 mm depth, finished with plaster (size as per actual site conditions) K. Lift car size : About 1100 mm width X 1000 mm depth L. Car entrance : Clear opening 800 mm wide X 2000 mm high protected with car door M. Landing entrance: Clear opening 800 mm wide X 2000 mm high protected with landing door N. Car door : Stainless steel /Glass Door two pannel telescopic/centre opening flush type O. Landing door : Stainless steel /Glass Door two pannel telescopic/centre opening flush type P. Door operation: Automatic electric power operated door with infra red protection Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides R. Car floor : Hard wood covered with PVC/ marblex tiles S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium T. Car ventilation : Pressure fan with anodised aluminium grill U. Emergency lighting in car: Battery operated Emergency lighting in the lift car V. Intercom system : Battery operated Intercom system in lift car, machine room and control room W. Emergency alarm : Battery operated alarm bell system in lift car & contol room X. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room Y. Fire man switch : Fire man switch at main landing termanal

Quantity1

Rate-

Amount -

Make :- Otis/Kone/Thuyson/Eskey/Omega/already approved in board/will be approved by board during the course of construction

Quantity-

Rate-

Amount -

Add or deduct for providing all additional parts/ equipments or for enhancing the capacity of parts/ equipments in MACHINE ROOM LESS TYPE automatic lift for 6 persons, speed 1.0 m/sec for every additional floor beyond initial G+3 floors.

Quantity4

Rate-

Amount -

Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

Quantity-

Rate-

Amount -

Short Point

Quantity229

Rate-

Amount -

Medium Point

Quantity678

Rate-

Amount -

Long Point

Quantity730

Rate-

Amount -

Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

Quantity276

Rate-

Amount -

Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

Quantity437

Rate-

Amount -

Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

Quantity-

Rate-

Amount -

Medium Point

Quantity120

Rate-

Amount -

Long Point

Quantity244

Rate-

Amount -

Extra Long Point-I

Quantity84

Rate-

Amount -

Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

Quantity-

Rate-

Amount -

Long Point

Quantity72

Rate-

Amount -

Extra Long Point-I

Quantity130

Rate-

Amount -

Extra Long Point-II

Quantity154

Rate-

Amount -

Extra Long Point-III

Quantity110

Rate-

Amount -

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

Quantity-

Rate-

Amount -

3 X 2.5 sq. mm in 20mm conduit

Quantity5182

Rate-

Amount -

6 X 2.5 sq. mm in 25mm conduit

Quantity1915

Rate-

Amount -

9 X 2.5 sq. mm in 32mm conduit

Quantity895

Rate-

Amount -

Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5)

Quantity-

Rate-

Amount -

25 mm

Quantity5681

Rate-

Amount -

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010)

Quantity-

Rate-

Amount -

5 x 6 sq. mm

Quantity1512

Rate-

Amount -

5 x 10 sq. mm

Quantity2164

Rate-

Amount -

Supplying and drawing following pair 0.5 mm FRLS PVC insulated copper conductor, unarmored telephone wire in the existing surface/ concealed Steel/FRLS PVC conduit as per specification and IS: 694 (2010)

Quantity-

Rate-

Amount -

2 Pair

Quantity2840

Rate-

Amount -

Supplying and drawing following grade co-axial TV wire FRLS PVC insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed Steel/PVC conduit as per specification and IS: 694 (2010)

Quantity-

Rate-

Amount -

RG-6 grade

Quantity1836

Rate-

Amount -

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as per specification.

Quantity-

Rate-

Amount -

75mmX75mm (1/2 Module)

Quantity208

Rate-

Amount -

Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification.

Quantity-

Rate-

Amount -

Fan regulator (two module size) electronic stepped type moving all rounds

Quantity224

Rate-

Amount -

Telephone socket outlet

Quantity104

Rate-

Amount -

T.V. antenna socket outlet

Quantity104

Rate-

Amount -

25/32 amp A.C. Starter switch

Quantity182

Rate-

Amount -

Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification.

Quantity224

Rate-

Amount -

Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments.

Quantity-

Rate-

Amount -

1200 mm sweep

Quantity5

Rate-

Amount -

Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9

Quantity-

Rate-

Amount -

300 mm sweep

Quantity4

Rate-

Amount -

Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan)

Quantity224

Rate-

Amount -

Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.

Quantity-

Rate-

Amount -

18/20 watt {4 feet}

Quantity15

Rate-

Amount -

Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)

Quantity-

Rate-

Amount -

8 way, Double door

Quantity37

Rate-

Amount -

Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)

Quantity-

Rate-

Amount -

6 way Double door

Quantity44

Rate-

Amount -

Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.

Quantity-

Rate-

Amount -

6 amps to 32 amps

Quantity864

Rate-

Amount -

Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.

Quantity-

Rate-

Amount -

40 amps

Quantity36

Rate-

Amount -

63 amps

Quantity44

Rate-

Amount -

Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as per specification.

Quantity200

Rate-

Amount -

Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification:

Quantity-

Rate-

Amount -

With 2 metre long GI Pipes and 25 kg back filling compound.

Quantity20

Rate-

Amount -

Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1)

Quantity-

Rate-

Amount -

3.5 x 50 sq. mm.

Quantity960

Rate-

Amount -

3.5 x 95 sq. mm.

Quantity800

Rate-

Amount -

Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. .

Quantity-

Rate-

Amount -

3½ X 50 sq. mm (32 mm)

Quantity24

Rate-

Amount -

3½ X 95 sq. mm (38 mm)

Quantity20

Rate-

Amount -

Supplying and erection of angle/channel iron cross arms/ bracket/ other fitting of approved size and shape including drilling of holes for insulator pins, bolts and nuts etc as per specification.

Quantity200

Rate-

Amount -

DISTRIBUTION PANNEL BOX FOR EMERGENCY SUPPLY - 05 WAY -Design supply installation and testing of outdoor type (IP 55) distribution panel bords made of 2mm thick crca sheet steel enclousre duly Powder coated free standing floor/wall mounted type.

Quantity-

Rate-

Amount -

(A) Incomer: - 01 nos 63 Amp, 25 KA four pole MCCB of approvedn make with OL/SC relese ON/OFF indication Lamp.

Quantity-

Rate-

Amount -

Four pole 100Amp AL bus bar, PVC insulated

Quantity-

Rate-

Amount -

(B) Outgoing: - 02 nos 40 Amp 25 KA TP MCCB of approved make with SC/OL release amd ON/OFF indication lamp, 01 Nos 32 Amp TP&N MCCB and 02 Nos 06/32 Amp SP&N MCB.

Quantity-

Rate-

Amount -

Supplying and fixing of GI earth terminal - 02 Nos.

Quantity-

Rate-

Amount -

Supplying and fixing of 07 lever godrej padlock with keys - 02 Nos.

Quantity-

Rate-

Amount -

Connecting cables as required

Quantity-

Rate-

Amount -

Led type Indicator - 03 Nos. Digital ammeter, Voltameter & Frequency with selectcor switch and protection fuse - 03 Nos.

Quantity-

Rate-

Amount -

Providing a locking arrangement of good quality with 3 nos. keys. and Tagging all the incomming & outgoing MCB/MCCB, cable etc. directed by as per site engineer incharge. All the incoming & outgoing cables are properly terminating with required size of lugs.

Quantity1

Rate-

Amount -

METERING PANEL FOR 03 PHASE EM (08 WAY) Design, manufacture, supply and fixing of outdoor type weather proof flush model type cubical distribution panel board made of made of CRCA ms sheet 14 SWG (panel sides, upper, lower and Ft. doors) 16 SWG (back side and compartment) duly fabricated, duly powder coated painted on all sides, anti rust and corrosion treatment, fixed in position as required with seperate chambers for bus bar, energy meters, incoming and outgoing switches/MCCB/MCB, cable, alleys making good damages done, making internal connection & numbering/marking of incoming and outgoing cables, bus bars, I/O switches, MCCB, MCB, energy meter etc. complete with appropriate size of P.V.C. insulated cables/wires, including providing required size of lugs and glands clamping arrangements, lockable hinged door etc complete as per specifications with following material consisting of following fittings.

Quantity-

Rate-

Amount -

Incoming:-(A) supplying and fixing 160 amp capacity 4 pole 25kA breaking capacity MCCB 415V, 50Hz (Icu = Ics) with rotary operated machanism and padlocking arrangment-02 Nos., (01 No. for Incommer & 01 No. for Interconnection.) (B) 1 set supplying and fixing of 200 amps 4 strip aluminium bus bars with insulation sleeve fixed on suitable insulators, nut, bolt, washers required holes etc. complete (C) Digital type ameter (0-200 Amps) & voltmeter (0-500 Volts)-01 Nos. (D) LED indicating lamp (R,Y,B) for phase indicating - 02 Set. (01 No. for Incommer & 01 No. for Interconnection.) Outgoing:- (A) Providing 8 nos. 03 phase energy meter chamber of sutaible size with 6mm thik backelight sheet, fixing arrangement etc . (B) Supplying and fixing of 8 nos. 40 Amp, 415V, 10 kA breaking capacity TPN MCB for outgoing sevice cable including, suitable size of MS Panel Stand as per Direction of Engineer -In-charge.

Quantity10

Rate-

Amount -

Assistant Engineer

Quantity-

Rate-

Amount -

Chhattisgarh Housing Board

Quantity-

Rate-

Amount -

Div-1, Raipur (C.G.)

Quantity-

Rate-

Amount -

389 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Chhattisgarh Housing Board Tender

Chhattisgarh Housing Board - CGHB Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Bid Award Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS