Bhoramdeo Sahakari Shakkar Karkhana Maryadit Tender

6MW Synchronous Generator Relay Pannel (Instalation & Testing) for KW - 6000, RPM - 1500, PF - 0.8 Lag, Statar Volt. - 11000, Statar AMP-394, Insulation Class - F, Phase - 3, Hz - 50, Connection - Star, Ambient Temp. 50ºC, Inlet Temp. 50ºC, Exct. Volt. - 122, Exct. Amps - 387, Duty - Continious Note :- All Required Parts will be arrange by Contractor Make - ABB/L&T (Manufactures/Authorised Dealer)

6MW Bettery Charger instalation & Testing Operating Volt. 415, 3 Phase - 4wire, 50 HZ AC Float Charger 110-123.75V/60A, FCB Charger Float Mode 110-123.75V/60A, Boost Mode 99-132V/45A Note :- All Required Parts will be arrange by Contractor Make - Uni-Insta Battery Charger/Amarraja (Manufactures/Authorised Dealer)

33KV/11KV Switch Yeard Maintenance & Testing all C.T., P.T., L.A. & all control wirering testing, 7.5 MVA & 2 MVA Transformer Overhauling, HT to LT transformer testing, earthing Strip Replacement, all equipment IR testing Note :- All Required Parts will be arrange by Contractor (First Class Electrical Contractor)

Cane Carrier Supply of Ac VVVF Drive along with 75 KW motor Make - Siemens of suitable capacity type IE3, insulation class H, along with forced cooling arrangement. VVFD (Rating 90 KW) should be supplied along with the following components. For incoming suitable MCCB along with spreader terminal, rotary handle, all phase indications, multifunction meter, Current transformer, heavy duty drive suitable for operation of motors. Drive should be given in panel along with input choke, output choke, control MCB, LED indications, push buttons, auxiliary contactors & signal isolator etc. The Panel shall comprised of fan & filter, Control transformer, power TB, control TB, door limit switch, panel shall comprise of hot air canopy, dust Proof gasket & anti vibration pad. Local control station with push button metering & indications as per site requirement. Scope also include laying of cables incoming & out going 150 Sq. mm, 3.5 core along with (aproxmatly 40 mtr.) copper cable all armoured, supply of 1.5 Sq. mm, 16 Core aluminium armoured cable (aproxmatly 100 mtr.) shall also be in the scope of party. Scope of work includes supply, installation, testing & Commissioning of system. Note :- All Required Parts will be arrange by Contractor Make - ABB/AMTECH (Manufactures/Authorised Dealer)

Digital Process Indicator Model : 4C52000, Input : 4 - 20 MA Range i) 0 to 600ºC (01 No.) ii) 200 to 200mmWC (01 No.) iii) 0 to 60 Kg/cm² (01 No.) iv) 0 to 45 TPH (02 Nos.) Display : 4 digit, 1" RED 7 Segment LED, Transmitter Supply : 24 VDC for Power Two-wire Transmitter Supply : 90 to 270 VAC/DC (45-65 Hz) Mounting : Flush on Panel Cutout : 138mm (W) X 68mm (H) Note - all range programmed with 4C52000 Make - Nishko (Manufactures/Authorised Dealer)

Rediator Cleaning of Copper Tube & Coper Fins by New one in your existing CACW Cooler (Radiators) of 375 KW D.C. Motor Make- Kirlosker Note :- all tools & Tackles, Man Power & Required Spares will be scope of contractor (Any Contractor)

Installation and Testing ABT Meter Detail :- Type - 3 Phase 4 wire, CTR - 200/5A, PTR - 33KV/110V, Class - 0.2s, Meter should be ABT Compatible Make - Secure Meters Ltd. (First Class Electrical Contractor)

Installation and Testing Metering Equipment Detail :- Type - 3 Phase 4 wire, CTR - 200/5-5A, CT Class - 0.2s, CT Burden - 7.5VA, PTR - 33KV/110V, PT Class - 0.2, PT Burden 30VA, No of core 02 (Dual Core) (First Class Electrical Contractor)

Air Compressure Repairing & Overhauling Model - EH-200, Sl No. - REC 000712, Bore - 215.9, Strke - 190, RPM - 400, Press - 7.5, Primemover K.W. - 37, FAD - 4.08, Spec No. - 045.037, Date Jan 2011 (Including Spares) Make - Kirloskar (Kirloskar, Hall Mark, Khosla Air Compressor authorised Service Engineer Experience Must be produce similar work for five years)

Air Compressure Repairing & Overhauling Model - 1HA2T, SL No. REC002866, L P Bore 250, FAD M³/Cm² 2135, H P Bore 250 Press Kg/Cm² - 1, Stroke 150, RPM 805, KW - 37, Spec.No. 296.140 Make- Kirloskar Pneumatic Co. Ltd. (Kirloskar, Hall Mark, Khosla Air Compressor authorised Service Engineer Experience Must be produce similar work for five years)

Air Compressure Repairing & Overhauling Model - EH-150, Sl No. - AA0054, Bore - 175.00, Strke - 165.00, RPM - 660, Press - 7.50, Primemover K.W., FAD - 4.08, SPEC No. - 026001, Date Dec. 2011 (Including Spares) Make - Kirloskar (Kirloskar, Hall Mark, Khosla Air Compressor authorised Service Engineer Experience Must be produce similar work for five years)

Air Compressure Repairing & Overhauling Model -TBTD MM, Sr. No. - AL0367, LP Bore 255, FAD M³/Min. - 6.29, Stroke - 120, RPM - 650, Speed No. 269121, Make - Kirloskar Pneumatir Pvt. Ltd. (Including Spares) Make - Kirloskar (Kirloskar, Hall Mark, Khosla Air Compressor authorised Service Engineer Experience Must be produce similar work for five years)

Air Compressure Repairing & Overhauling Model - 65T, Size - 5&5 & 312X4, Sr.No. - 09112101 (Including Spares) Make - Hall Mark (Kirloskar, Hall Mark, Khosla Air Compressor authorised Service Engineer Experience Must be produce similar work for five years)

Air Compressure Repairing & Overhauling Model -AE-20, Capacity - 250CFM, Pressure - 12Kg/cm²,Double Cylinder (Including Spares) Make - Khosla (Kirloskar, Hall Mark, Khosla Air Compressor authorised Service Engineer Experience Must be produce similar work for five years)

Air Blower Repairing & Overhauling W. P. 01 Kg/cm², Capacity 17.25m³/min, Motor 40 HP RPM 1000V Belt Drive with Horizontal flow MOC Specification Construction CI Rotor Pair S.G. Iron Costing Body outer and other Covers Materials CI IS 210 FE 260 Gear Pair Alloy Steel with Hardend and Craund Bearing Pair Inside SKF/ZKL (Including Spares) Make - M.S. Ankur Ind. Gujral (OEM/Service Engineer)

Dynamic Balancing at Factory Site A. Cane Leveller - 01No., B. Fibrizer – 01No., C. Bagasse Cillo Fan – 01No., D.ID Fan of 70MT Boiler – 02 Nos., E.FD Fan of 70MT Boiler – 02 Nos., F.SA Fan of 70MT Boiler – 02 Nos., G. PA Fan of 70MT Boiler – 01 No., H. ID Fan of 35MT Boiler – 01 No., I. FD Fan of 35MT Boiler – 01 No., J. SA Fan of 35MT Boiler – 01 No., K. 3MW Turbine – 02 Nos., L. All C/F Machine – 11 Nos., (Five Year Experience of Dynamic Balancing in Sugar Factory)

Hydraulic Accumulator of Mills - 9 Nos. Work - Pressure Testing & Refilling of N2 Gas at Factory Site (Including Spares) Note :- Spares Should be from reputed mfg. make (Five Year Experience)

Complete Repairing, Replacement of Spare Parts & Maintenance with belt Conveyer Repairing & New Modification work of Vacuum Rotory Filter. Details of Equipments Make - Jard Filtering Area m² - 76.83, Size (Dia X L)" - 12X24 SS Screen Hole Size - 625 Micron Make - Manufactures/Authorised Dealer