All India Institute Of Medical Sciences Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Chhattisgarh government has posted on its website in a very hassle-free manner.
All India Institute Of Medical Sciences - AIIMS Tender
Eprocure
Opening Date24 Dec 2024
Closing Date16 Jan 2025
Tender Amount₹ 2,72,61,136
Costs
EMD
₹ 5,46,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Up-gradation Works At Gastroenterology Department In Aiims Raipur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_IMSRP_836306_2Tender No
Up-gradation works at Gastroenterology Department in AIIMS RaipurTender Authority
All India Institute Of Medical Sciences ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
300
107
32355
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
15
9344
140165.25
... More
Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 Coarse sand)
17
8752
148793.35
... More
Granite work gang saw cut (polished and machine cut) of any colour, shade and thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the granite shade (To be secured to the backing by means of cramps, which shall be paid for separately): Granite stone slab of colour black, cherry/ rubby red:
-
-
-
... More
Area of slab over 0.50 sqm
115
6962
800663.35
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red
-
-
-
... More
Area of slab upto 0.50 sqm
5
5413
27067.5
... More
Area of slab over 0.50 sqm
10.71
5136
55009.77
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
6.6
568
3752.43
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required
40
714
28576
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes
-
-
-
... More
5.0 mm thick glass panes (weight not less
than 12.50 kg/sqm).
32
2600
83214.4
... More
Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
15
176
2646
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
9
3473
31264.65
... More
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
-
-
-
... More
100x60x2.50 mm
16
106
1701.6
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
-
-
-
... More
40 mm
152
311
47302.4
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
8
983
7865.2
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
250x16 mm
12
260
3127.2
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
200x10 mm
15
99
1495.5
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
8
66
530
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
15
72
1085.25
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
-
-
-
... More
Double strip (horizontal type)
185
39
7344.5
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.
-
-
-
... More
100mm
177
90
16009.65
... More
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin- charge.(Payment of providing and fixing auto closing hinges shall be paid separately)
613
2829
1734330.25
... More
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm
20
186
3733
... More
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
49
885
43369.9
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).
-
-
-
... More
Size of Tile 600x600 mm
201
1893
380673.9
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
-
-
-
... More
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
15
2068
31031.25
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I.
slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
-
-
-
... More
Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity 0.043 w/mK.
256
2158
552486.4
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 fine sand)
261
343
89692.65
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
311
156
48531.55
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
Old work (One or more coats)
270
62
16929
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
Two coats
600
137
82470
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
100
25
2515
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
-
-
-
... More
One or more coats on old work
75
102
7710
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
3
3551
10653.75
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge
-
-
-
... More
In cement mortar
54
2060
111250.8
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
222.5
56
12537.88
... More
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
104
263
27450.8
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
7
3960
27723.85
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board
-
-
-
... More
610x510 mm bowl depth 200 mm
5
4940
24704
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete
Flexible pipe
-
-
-
... More
32 mm dia
11
119
1315.05
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
50 mm nominal dia Pipes
100
934
93415
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20 mm nominal dia Pipes
100
537
53760
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
25 to 40 mm nominal bore
10
911
9119
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
-
-
-
... More
15 mm nominal bore
14
97
1368.5
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
30
574
17229
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type
-
-
-
... More
100 mm nominal dia
20
37
752
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
159
530
84413.1
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Powder coated aluminium (minimum
thickness of powder coating 50 micron)
144
634
91360.8
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.
-
-
-
... More
Pre-laminated particle board with decorative lamination
on both sides
13
1115
14500.2
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not
less than 12.50 kg/sqm)
15
1505
22578.75
... More
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
14
528
7403.9
... More
Providing and fixing concealed hinge of approved quality for 19-20mm thick door with stainless steel screws complete :
190
144
27369.5
... More
Providing and fixing minimum 2 mm thick seamless PVC flooring joints should be welded by special PVC thermal welding units using PVC welding bars of same colour. The corners should not be terminated sharply and sealed perfectly and uniformly. Flooring should be homogenous single layer conductive flooring. Corners should be uniformly curved, final surface should be non corrosive to biological fluids and detergents, etc. all complete and as per the directions of Engineer In charge.
124
3170
393200.28
... More
Providing & Fixing 6 mm thick BWP grade marine ply as per IS 710 of approved brand over flush door and MS door frame including required screws, nails, glue etc, all complete as per the direction of Engineer in charge.
9
929
8362.62
... More
Providing & Fixing 2 mm thick Lead sheet over flush door and MS door frame including required screws, nails, glue etc, all complete as per the direction of Engineer in charge.
5
12083
60417.25
... More
Providing and fixing in position single bay stainless steel (304 grade) scrub station of size 900x508x1360 mm with automatic sensor & foot operated tap with hot and cold water temperature controller valve and foot operated soap dispenser arrangement of approved make and quality as per the direction of engineer in charge.
2
158410
316821.62
... More
Providing and fixing in position stainless steel (304 grade) 1.5 mm thick sheet Washing station of size 1800x600x900 mm with proper hole of inlet line and Drainage line in required size,shape & arrangement of approved make and quality as per the direction of engineer in charge.
1
93000
93000.84
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :
-
-
-
... More
25 mm dia (heavy type)
17
186
3168.8
... More
Providing and fixing powder coated aluminium channel of size 27.20 x 20.20 mm and thickness 1.2 mm, with metal runner made of MS & PVC material in the ceiling pipe set 2 mm thick Tee powder coated of required size and MS powder coate fitting wall to wall of size 50 x 25 mm thickness 2.5 mm and other required fittings, screws, hardware etc all complete of approved quality & make as per the instructions of Engineer in charge.
105
1293
135780.75
... More
Providing and fixing anti Microbial , anti Fungal, waterproof, polyster fabric ICU curtain of 180 GSM in required size, thickness & colour including fixing to the channel with required fittings, hardware etc all complete of approved quality & make as per the instructions of Engineer in charge.
220
495
109047.4
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
2
1648
3297.9
... More
Providing and fixing of polyster fabric,net parallel Zebra blind curtain in required size , thickness & colour including fixing with required fittings, hardware etc all complete of approved quality & make as per the instructions of Engineer in charge.
2.5
5150
12875.23
... More
Providing and fixing of 1 mm thick fabric Vertical roller blind curtain in required size & colour including fixing with required fittings, hardware etc all complete of approved quality & make as per the instructions of Engineer in charge.
59
3639
214750.56
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
100 mm nominal dia Pipes
180
3271
588906
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
5
820
4103.5
... More
Providing and fixing frosted film over the glass of windows, glass partition etc including cutting of film in a certain design, shape all complete as per the instructions of Engineer In charge.
64
1179
75463.68
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
6.3
5325
33553.17
... More
Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing Stainless steel section (if required), Stainless steel L- connector, fixing arrangement, filling gap with silicon sealant and making necessary holes etc. all complete to ensure stability and stiffness of the partition as per direction of Engineer-incharge.
20
3012
60248.6
... More
Providing and fixing 40 mm thick HPL (Hinge Pressure Laminate ) Hermetic Hinge single Leaf Door for civil opening 1800(W)x2100 (H) with S.S. Ball bearing hinges , "D" Handles , both side key operation dead lock ,View window size 300x300 mm ,sealing gasket, Automatic Drop seal ,door seal and one door closer etc. all complete as per instructions of Engineer In charge.
1
128037
128037.29
... More
Providing and fixing anti microbial Epoxy flooring of thickness not less than 3 mm, in required colour, patterns etc. having anti skid properties, corners should be uniformly curved, final surface should be non corrosive to biological fluids, detergents etc. all complete as per the instructions of Engineer In charge.
250
2778
694580
... More
Providing and fixing 15-17 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, skirtings and similar locations of required size, approved shade, colour and texture laid with epoxy resin based adhesive, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, cleaning, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite stone slab colour black, Cherry/Ruby red and any size:
36
5724
206079.84
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
5957
11915.8
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
8
1607
12863.6
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
20
168
3367
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
20
231
4639
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board
conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
62
1355
84059.6
... More
Providing and pasting wall sticker wallpaper thickness of 150-200 gsm over the Wall including adhesive, Glu,,cutting of wallpaper in a certain design, shape all complete as per the instructions of Engineer In charge.
120
1111
133431.6
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit & accessories as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
403.68
247
100011.72
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
199.68
292
58388.43
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
554.59
355
196957.09
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
1132.57
570
646686.14
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
156.29
1451
226839.31
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
5
316
1584.3
... More
3 Module (100mmX75mm)
72
347
25034.4
... More
4 Module (125mmX75mm)
1
364
364.71
... More
6 Module (200mmX75mm)
43
427
18380.35
... More
8 Module
86
482
41515.64
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch
75
109
8214
... More
15/16 A switch
276
165
45780.12
... More
3 pin 5/6 A socket outlet
236
129
30613.92
... More
6 pin 15/16 A socket outlet
207
209
43360.29
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
20
623
12461.8
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
42
1275.9
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
13
392
5100.68
... More
Supplying and drawing of 1 run of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
268
60
16243.48
... More
Supplying and fixing of 20mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
134
136
18237.4
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 way (4 + 12), Double doo
1
4349
4349.96
... More
8 way (4 + 24), Double door
3
6344
19034.13
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
84
272
22864.8
... More
Supplying and fixing TP&N MCB,440 volts, 'C' curve, suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning & accessories etc. as required.
-
-
-
... More
32/40 A
1
2399
2399
... More
63 A
3
3056
9168
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 A
1
3389
3389.8
... More
63 A
3
3053
9161.4
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
... More
For 6 way, Double door TPN MCBDB
1
1195
1195.15
... More
For 8 way, Double door TPN MCBDB
3
1424
4274.46
... More
Dismembering and reinstallation of existing 1200 mm sweep ceiling fan with providing and fixing of fan clamp (D type) for hanging as required.of existing ceiling fan and with fan clamp as required.
11
366
4026
... More
Dismembering and reinstallation of existing 1200 mm sweep ceiling fan as required.
26
253
6578
... More
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
2753
2753.95
... More
Supply and Installation of Exhaust fan suitable for single phase, 230 volts, 50 Hz, AC supply having RPM 1100 or better , 300 mm sweep, power input = 35W or less, Air delievery ≥ 700 CFM complete with motor, louvers/ shutters etc. as required in the existing window, includes dismembering of window glass, providing and fixing ACP panel (6mm thickness Aluminium composite panel) framing in place of glass, connection, testing, commissioning etc. as required.
1
3079
3079
... More
Supply and fixing of Recess/surface mounted LED down lighter fixture having wattage 14-18 watt, powder coated CRCA / die-cast aluminium housing, with high effiency diffuser, CCT 5700K- 6500K, CRI 80 with SDCM5, lumens efficiency output not less than 115 lumens / watt, with EMC/EMI compliant electronic driver having PF0.9, THD 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required.
25
1958
48950
... More
Supply and fixing of Recess/surface mounted 1200X300mm LED fitting 30-32 watt, powder coated CRCA / die-cast aluminium housing, with high effiency diffuser, CCT 5700K- 6500K, CRI 80 with SDCM5, lumens efficiency output not less than 115 lumens / watt, with EMC/EMI compliant electronic driver having PF0.9, THD 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required.
16
5059
80944
... More
Supply and fixing of Recess/surface mounted 600X600mm LED fitting 30-32 watt, powder coated CRCA / die-cast aluminium housing, with high effiency diffuser, CCT 5700K- 6500K, CRI 80 with SDCM5, lumens efficiency output not less than 115 lumens / watt, with EMC/EMI compliant electronic driver having PF0.9, THD 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required.
55
5059
278245
... More
Supplying and Installation of clean room recess mounted 600X600 mm, 30-34 watt LED luminaries with lumen efficiancy of 100 lm/W, dimming option, highly specular anodized aluminum reflectors, optical antiglare system, high effiency polycarbonate diffuser with EMC/EMI compliant electronic driver having PF0.9, THD 10%, & minimum of 3kV surge/burst protection, complete with 50000 hrs burning for lifetime with supporting data sheet LM-79 & LM-80. Luminaries cover should be made of highly resistant, disinfectant proof laminated, safety glass/acrylic with stylish fine-grained surface. The reflectors should be of high quality, cleanable and non-deteriorating. The Recess frames should be gas tight. The white luminaries body should be made of sheet steel, perfectly powder coated, supplied ready for connection optionally for individual or series circuit with digital electronic control gear in multilamp technology. The Light fitting should be flush with the ceiling and should be removable from top or bottom. Optional pre-set color temperatures or adjust to any CCT in the Productivity Range 3000 K - 5700 K, Dimming Range 10%-100%
The LED used in the luminaire shall be only Lumileds, Nichia, Cree, osram & LGIT and hanging with necessary chain etc as required.
8
18441
147528
... More
Supply, Installation, Testing and Commissioning of 400 mm sweep, Wall mounted fan having 3 nos. blades, copper winding, Air delivery minimum 65 CMM, 1320 RPM or better including all remaining accessories suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
5
3235
16175
... More
Supply and Installation of 10 litre capacity Water Geysers in required location.
* 10 liter capacity
* Temperature Range:- 25-70ºC or better
* Wattage:- 2KW or less
* 5 star rating
* suitable for single phase, 230 volts, 50 Hz, AC supply
1
11698
11698.56
... More
Providing and Laying conductive copper grid laid underneath the PVC sheet, supported by liquid epoxy compounds allowed to set as a uniform and level surface. The copperstrips to be made Visible by grinding and no copper strip should project more than0.Smm above level surface to avoid damage to the PVC sheet One earthing leadshould be brought out from every 150sq.ft area and attaching it to the mainearthing strip/ground Copper grounding strips (0.05 mm thick, 50 mm width) should be laid flat on thefloor in the conductive adhesive and connected to copper strip of grounding. The connection from copper grid should be brought out uniformly at places to formequipotential grid. Flooring should be mechanically shock proof, scratch proof, flame retardant andanti-microbial.
93.67
80
7552.61
... More
Supplying and Installation of 60 mm thick hermetically sealed single sliding door of 2.1 m (H) x 1.0m (W). The controller should be capable of being operated by elbow switches/ foot switches as well as touch less sensor. The track should be of Stainless steel/ Aluminum and the running surface for the top rollers should be suitably angled to reduce resistance to movement. The door material should be of HPL colour should match the interior and care should be taken to make the leaf strong and light weight.The door leaf should be hung by means of hard plastic rollers of high quality with double bearing at the top. Rollers should be provided under the stainless steel/ Aluminum track to enable smooth and noiseless movement. Opening and closing of the door should be microprocessor controlled electromechanical movement. One should be able to open and close the door effortlessly in case of failure of automatic mechanism. Door opening handle should be of SS (gloss finish), i/c high quality cylindrical lock. Door leaf should have high quality synthetic rubber gasket with long life to ensure hermetic sealing, Air tightness 99.99% at a pressure of 100KPa. The finished floor on either side of the door should be perfectly level (maximum permissible difference +1mm). The overall thickness of the finished door should be of 60mm. The inner part of the door should be filled with CFC free polyurethane foam. (Sealed airtight to prevent further ingress of any microbial organism). The door and controls should comply with IEE regulation. All motors used should be DC brushless/ AC motors with essential isolation from mains. Door should be Lead-lined (minimum 2 mm thick) in compliance with AERB guidelines for Radiation safety for use of C-Arm (fluroscopy machine). All motors used should be DC brushless motors with essentíal isolation from mains. Door should be with vision window 300 mm x 300 mm with double glazed panels. Vision Window should be made of Lead- lined glass (minimum 2 mm thick lead equivalent) in compliance with AERB guidelines for Radiation safety for use of C-Arm (fluroscopy machine). Noise level should not exceed 60 db. The starting time after receiving the signal shauld be adjustable between 0.5 to 20 seconds. The complete door assembly should be BIS/ European CE marked/ US FDA approved. Test certificate for hermetically sealed door frame (factory test certificate) should be enclosed with the pre dispatch documents.
Agency has to provide 3 year of OEM warranty for the product.
1
498064
498064
... More
Supplying and Installation of 60 mm thick hermetically sealed single sliding door of 2.1 m (H) x 1.8 m (W). The controller should be capable of being operated by elbow switches/ foot switches as well as touch less sensor. The track should be of Stainless steel/ Aluminum and the running surface for the top rollers should be suitably angled to reduce resistance to movement. The door material should be of HPL colour should match the interior and care should be taken to make the leaf strong and light weight.The door leaf should be hung by means of hard plastic rollers of high quality with double bearing at the top. Rollers should be provided under the stainless steel/ Aluminum track to enable smooth and noiseless movement. Opening and closing of the door should be microprocessor controlled electromechanical movement. One should be able to open and close the door effortlessly in case of failure of automatic mechanism. Door opening handle should be of SS (gloss finish), i/c high quality cylindrical lock. Door leaf should have high quality synthetic rubber gasket with long life to ensure hermetic sealing, Air tightness 99.99% at a pressure of 100KPa. The finished floor on either side of the door should be perfectly level (maximum permissible difference +1mm). The overall thickness of the finished door should be of 60mm. The inner part of the door should be filled with CFC free polyurethane foam. (Sealed airtight to prevent further ingress of any microbial organism). The door and controls should comply with IEE regulation. All motors used should be DC brushless/ AC motors with essential isolation from mains. Door should be Lead-lined (minimum 2 mm thick) in compliance with AERB guidelines for Radiation safety for use of C-Arm (fluroscopy machine). All motors used should be DC brushless motors with essentíal isolation from mains. Door should be with vision window 300 mm x 300 mm with double glazed panels. Vision Window should be made of Lead- lined glass (minimum 2 mm thick lead equivalent) in compliance with AERB guidelines for Radiation safety for use of C-Arm (fluroscopy machine). Noise level should not exceed 60 db. The starting time after receiving the signal shauld be adjustable between 0.5 to 20 seconds. The complete door assembly should be BIS/ European CE marked/ US FDA approved. Test certificate for hermetically sealed door frame (factory test certificate) should be enclosed with the pre dispatch documents. Agency has to provide 3 year of OEM warranty for the product.
3
527362
1582086
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required
3
14713
44141.85
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
105
1033
108520.65
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.
4.04
177
717.1
... More
Supplying, installation, testing and commissioning of M.V. cubical type totally enclosed dust and vermin proof Main Distribution Boards suitable for use on 430 V 3 phase 4 wire 50 Hz AC supply, having compartmentalized construction for different incoming/outgoing MCCBs from Approved Make, and separate bus bar & cable alleys , fabricated from 2 mm thick CRCA sheet steel of uniform width complete with copper bus bars , MV danger notice plate, Digital type ammeter with Ammeter selector switch , voltmeter with Voltmeter selector switch , LED indicating lamps , Interconnection with suitable capacity copper strips / rods, connection of incoming and outgoing cables with thimbles , smoke/Siemens grey colour stove enamelled painted and having following incoming and outgoing switchgears, 2 earth bolt, removable cable gland plate with spare suitable hole, wall/floor mounted, lockable using hollow standard LT Panel lock key complete as per site required or as approved by Engineer In-charge.
A. INCOMER
01 nos. 200amps 25kA TPNL MCCB from Approved Make Thermo-magnetic release type with rotary handle.
01 nos. Digital type single function volt meter to show
0-500V voltage with phase selector switch
01 nos. Digital type single function ameter to show amperage with phase selector switch
03 Nos CTs 125/5 ratio
03 LED Indication Light with toggle switches
B. OUTGOING
05 nos. 40A/63A TPNL MCCB (25 KA) Thermo-magnetic release type with rotary handle.
1
156684
156684
... More
Supply & laying of XLPE Insulated cable 4 core x 25 sq.mm Copper cable with proper clampling/Conduiting as required along with complete gland & termination with lugs and as per direction of Engineer Incharge.
35
1667
58345
... More
Supply & laying of XLPE Insulated cable 4 core x 70 sq.mm Copper cable with proper clampling/Conduiting as required along with complete gland & termination with lugs and as per direction of Engineer Incharge.
55
4679
257345
... More
Supply & Installation of 3 pin 20/25 ampere Top for indoor ac system as per approval of Engineer incharge.
13
134
1742
... More
Providing and fixing 4.00 mm dia. Copper wire on surface or in recess for loop earthing as required.
50
164
8240.5
... More
Supply and ITC of 4 nos set of Bullet type Camera 2 MP 8 port NVR along with 8 port POE Switch having 2 TB surveillancewith interconnection with the Desk Top etc,as required and direction of Engineer In charge.
4
39885
159540
... More
Supply and Installation of Backside LED Light Strip Golden LETTER - BLUE ACP BOARD - 8 FT X 3 FT as per design approved by the Engineer-in-charge.
2
31354
62708
... More
Supply and Installation of Digital Signages Board 4 FT X 2.5 FT as per design approved by the Engineer-in-charge.
13
22776
296088
... More
Supply and Installation of Glow Sign Transparent Acrylic signages 100 X 18 CM having 3 mm thick acrylic with laser round cut, Transparent acrylic border etc. as per design approved by the Engineer-in-charge.
20
5061
101220
... More
Supply and Installation of LED ACP Sign Board 8 FT X 3 FT with 8 mm thick acrylic, embossed 5mm depth, Back panel madeup of 0.8 mm GI sheet (pre coated white), 3mm acrylic sheet inside (reverse letter AIIMS Raipur) etc. as per design approved by the Engineer-in-charge.
3
94746
284238
... More
Supply and Installation of Transparent Acrylic 3 FT X 1.5 FT having 3 mm thick acrylic with laser round cut, Transparent acrylic border etc. as per design approved by the Engineer-in-charge.
8
2562
20496
... More
Supply and Installation of VHA wireless desktop microphone suitable for General PA system, RF Output Power-10mW (Max.),Modulation Mode- FM,Microphone Element-Condenser, Cardioid,Maximum Deviation-±18kHz,Frequency Response-100Hz-12kHz, Power Requirement-2×1.5V Pencil Cells,Current Consumption-40mA,Controls-ON/OFF Switch,Indication-Red Ring LED in the gooseneck, Frequency Stability-± 0.005%,Audio Output-0-50mV adjustable,S/N Ratio-90dB,Distortion-0.5%,Antenna Type-Telescopic, Power Requirement-220V-240V AC 50Hz for AC adaptor(supplied alongwith)Controls-Power Switch, Output Volume Contro,
2
6400
12800
... More
Supply, Installation, Testing & Commissioning of 28 HP modular type variable refrigerant flow / Variable regrigerant Volume air cooled outdoor units suitable for cooling and heating having all hermatically sealed inverter type scroll compressor, minimum two compressor for above 14 HP modules, microprocessor based controller , top discharge type condensing units , with R410 A refrigerant, Vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 degree Celcius ambient temperature without tripping. The unit shall be suitable to work on 400+/-10%, 3phase , 50 Hz AC power supply .The unit shall be filled with first charge of the refrigerant and ready for use as required with suitable communication cable. The COP at AHRI Conditions shall not be less than 3.1 and IEER not less than 6.5. System should be compatible to the central control panel.
1
488713
488713.95
... More
Supply, Installation, Testing & commissioning of following minimum capacity 1 way flow VRV/VRF Cassete type indoor ceiling mounted unit euippted with synthetic washable media prefilter,Fan section with low noise fan/Dynamic balanced blower ,multispeed motor ,Coil section with DX copper coil, Electronic Expansion Valve,Outdoor Cabinet ,Drain Pump, Grill,Necessry Supports, Vibration Isolation, Cord less remote Control etc. as per approval of Engineer Incharge. Suitable for opertaion on single phase 230+/- 10% ,50 Hz Ac Supply ,Complete as required .The cooling capacity of indoor unit will be at air inlet conditions of 27 degree celcius DB and 19 27 degree celcius WB Temperature.
-
-
-
... More
3.2 TR
3
34862
104587.26
... More
2 TR
7
32750
229254.9
... More
Supplying, Installation, Testing and Commissioning including vaccumiazation and nitrogen testing of following nominal sizes of soft/hard drawn copper refrigeranr piping for AC unit ,complete with fitting with suitable adjustable ring type hanger supports, joining/brazing including acessaries , insulated with XPLE Class O Tubular insulation /with classo cosedcell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below-
-
-
-
... More
6.4mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
60
260
15630.6
... More
9.5mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
60
351
21117
... More
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
50
495
24775
... More
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
60
625
37513.2
... More
19 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
30
751
22552.5
... More
22.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
20
919
18395
... More
25.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation of nitrile rubber
50
1086
54334.5
... More
28.6 mm dia (OD) (Soft drawn) with tube thickness 1.6 mm with 19 mm thick insulation of nitrile rubber
30
1178
35344.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge for Drainage.
-
-
-
... More
32 mm nominal dia.
50
551
27579.5
... More
25 mm nominal dia.
30
426
12809.1
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
80
133
10696
... More
Supplying, fixing, testing, commissioning of supply air grill of powder coated aluminium with volume control dampers with anti smudge ring & removable core.
2
9681
19362.7
... More
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
2
6284
12568.2
... More
Supply and fixing of insulation work with 6 mm nitrile rubber on CPVC drain pipe properly as required.
80
201
16080
... More
Supplying, Fixing, testing and commisionning of 1000 CFM Treated Fresh air unit 5.5 Ton (Outdoor unit Plus Indoor Unit) DX Type .Fresh air unit is provided with primary filters & Fine Filter With Suitable UVGI ,Extruded aluminium hollow profile,double skin panel with thickness 25 mm thick panel consisting of pre plasticized G.I casing of thickness 0.8 mm outside layer and 0.8 inside layer with polyurethane foam/puff insulation factory injected between them by injection moulding machine ,complete with blower section with suitable static pressure as required and free from CFC/HFC, Puff are used, base frame of heavy G.I Channel of minimum 1.4 mm lifiting holes for handling. The unit shall be filled with first charge of the refrigerant and ready for use as required with suitable communication cable. The fans are dynamically and statically balanced,for blower and motor common base frame provided, induction motor with TEFC squirrel case,50/60 cycle,3 phase /1 phase ac supply with necessary vibration pad /arrangements etc. as per specification.
1
351574
351574
... More
Supply, Installation,Testing and Commisioning of inline fan with 1500 CFM exhaust air having powder coated steel housing, powder coated aluminium impeller, powder coated rotor, with IP 55 protection , "F"class insulation,themally protected at 145°C ,Maintenance free ball bearing ,permissible ambient temperature 0 to 60°C ,High voltage test according to IS 3588-1987,fan balancing 6.3 grade as recommended by IS 1940-1-2003,counter clockwise direction, casing & Suitable UVGI with low noise level below 60 db with all accessories require to installation are included in this.
1
146489
146489
... More
Supply, Installation, Balancing and commissioning of fabricated at site Aluminium Rectangular/ Round ducting complete with neoprene rubber gasket, elbows, Spitter dampers, Vanes, hangers, supports etc. as per approved drawing and specifications of following sheet thickness complete as required.
-
-
-
... More
0.80 MM Aluminium Ducting
180
2062
371160
... More
Supplying and fixing of Nitrile Rubber 19 mm thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.
180
752
135507.6
... More
Supplying, laying, fixing, testing and commissioning of following thickness closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature applied by suiatable adhesive with resin cloth and after this star bond layer thick layer applied . as per specifications and as required complete in all respect as per approval of Engineer Incharge AIIMS Raipur.
-
-
-
... More
32 mm on existing pipeline
50
2198
109901.5
... More
Supplying ,Fixing, testing and commisionning of fire dampers in supply air duct/main branch duct and return air path as and where required of sizes i/c control wiring ,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not external mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications.
-
-
-
... More
Fire Damper
7
11333
79335.97
... More
Actuator
3
10577
31733.13
... More
Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.
60
752
45169.2
... More
Supply and fixing of 4 kg clean agent (HCFC) portable fire extinguisher having pressure guage indicator and arrangement for wall hanging and with warranty for 5 years on complete product.
8
44203
353624
... More
Supply and fixing of 6 kg clean agent (HCFC) modular type ceiling mounted fire extinguisher along with all accessories required for fixing at true ceiling and with warranty for 5 years on complete product.
12
62462
749544
... More
Dismentalling of sprinkler pipeline and sprinkler and blocking the water inlet of sprinkler without any damage as per requirement and as per instruction from Engineer In-charge.
1
13946
13946
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered along with battery arrangement for power backup complete with all connections, interconnections as required.
-
-
-
... More
4 Zone
1
9427
9427.22
... More
Supplying, installation, testing & commissioning of smokedetector with builtin LED and mounting base complete with all connections etc. as required.
22
1225
26971.56
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
2
504
1008
... More
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
22
208
4585.02
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
2
592
1184.52
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
300
183
55185
... More
Providing and fixing "you are here" sign board near entrance and fire reflective sign board, reflective stickers signage for indication at fire doors, fire extinguisher, fire exit with suitable size as per requirement and as per instruction from Engineer In-charge.
1
28171
28171
... More
Providing and fixing of RO system 250 LPH micron filter1 nos, carbon filter 1 nos, pump 1/2 HP 1 nos, Digital panel 1 nos, SV, RO membrane, HPP 1 nos, Rota meter 2 nos, Pressure guage 1 nos, storage tank with stand 500 litre, automatic switch, pressure booster pump 1 HP with complete installation along with plumbing materials CPVC and with one year all parts warranty.
1
302838
302838
... More
Providing and fixing of dispensor potable water purification system with inbuilt watercooler having Normal, hot & cold water arrangement and 3 stages of purification and type of UV water purification technology and power consumptions of system 300 watt ( with +- 5% tolerance) and maximum 1000 input water TDS allow to the system and having operation of fully automatic with auto cutoff mode with one year all parts warranty.
2
54910
109820
... More
Providing and fixing of Stainless steel watercooler with inbuilt RO & UV filter system having 50 litre storage capacity, body material of SS304, refrigerent gas R134a, evaporator material of pure copper, having cooling capacity of 25 Litre per hour, purification capacity 20 litre per hour with maximum flow rate 20 litre per min, having stages of purification containing sediment purification, carbon block purification, reverse osmosis membrane purification, UV purification system with one year all parts warranty.
1
71824
71824
... More
Providing and fixing of 15 litre drinking water purification system with water filter type RO and UV both, copper condensor material, body material ABS grade plastic, having auto flushing system, purification capacity 15 litre per hour with maximum flow rate 5 litre per min, having stages of purification containing sediment purification, carbon block purification, reverse osmosis membrane purification, UV purification system with one year all parts warranty.
3
22255
66765
... More
Supplying, Laying, testing and commisioning of Medical grade copper pipe as per BS EN:13348:2016 standards. It should be solid drawn, seamless, deoxidized, non-arsenical, half hard, tempered and degreased copper pipe confirming to the standard. All copper pipes should be medical grade degreased &delivered capped at both ends. The Copper pipes should be accompanied with Manufactured Test certificate for the physical properties & chemical composition . Degreasing of pipe shall be such that there is less than 20mg/m2 (0.002mg/cm2) of hydrocarbons on the degreased surface when tested by the method specified BS EN:13348:2016.
Copper pipes must be inspected and duly Third Party Certified by (Lloyd’s Registered Asia).
BSI KITE Marked & CE Marked Copper pipes/tubes size and thickness of copper pipes 28mm Outer Diameter x 1mm thickness 22mm Outer Diameter x 1mm thickness 15mm Outer Diameter x 1mm thickness Pipeline Installation: Before erection, all copper pipes, fittings like bends, tees, reducers etc. should be cleaned for dirt, and should be degreased. Proper pipe cutters and bending machine should be used during installation of Copper pipes. All copper fittings like bends, Tees, reducers and straight couplings should be of same make as of copper pipes. Copper pipes and copper fittings must be manufactured by same manufacturing company. Each copper fitting of size 42mm or above should be individually packed. Brazing of pipe joined by silver brazing method for copper to copper. Inert gas welding technique should be used by passing Nitrogen gas inside the copper pipes during silver brazing, in order to avoid carbon deposition inside the copper pipes.All the installed pipes and joints must be leakage test with nitrogen gas for 24 hours before fixing of gas outlet and paint.
Copper pipes of the diameter up to 42mm OD Should be installed on the wall with the help of plastic saddles at the required span, as per HTM-0201 and metallic white powder coated clamps Should be used for pipe sizes above 54mm OD. Wherever the pipes cross brick walls, it should be covered with plastic pipes. All pipes should be installed without springing or forcing. All pipes should be protected against mechanical injury in a manner satisfactory to authorities having jurisdiction. Test: After erection, all the pipes should be cleaned or purged with the help of dry nitrogen gas, &should be tested with dry nitrogen at a pressure of 10 Bar for 48 hours. Painting: All installed pipes should be painted with two coats of synthetic enamel paint & colour codification as per HTM standards
-
-
-
... More
OD 15mm
300
1032
309750
... More
OD 22mm
250
1250
312700
... More
OD 28mm
600
1427
856680
... More
Supply, installation, testing and commisioning of Gas Terminal Outlets (Gas Outlets) with probes/Adaptors for Oxygen, Nitrous Oxide, Compressed Air 4, Medical Air 7, Vacuum & CO2 etc.
The Medical gas outlets shall confirm to HTM 02-01 / NFPA 99C Standards. It should be US FDA / European CE Certified with 4 digit notified body number or ETL Listed/UTL Listed/BIS certified. Front Loading Type Terminal Outlets should bedesigned to dispense medical gases (or an inlet for medical vacuum) to the secondary equipment(flowmeters, Suction regulators, etc.) at the point of use and is gas specific so that secondary devicescannotbe“attached”to the wronggas. When not in use the gas in a non-flowing state within the Outlet (Terminal unit) sealed by “O” ring. The adapter when inserted pushes the poppet inside and the gas starts flowing and sealing is ensured by the “O” ring or aseat.
The Outlets are Quick Connect Type and gas specificity is accomplished by "Pin indexing." The outlets should have following features:
• Push to insert and twist-to-release mechanism forprobes.
• Allows plugging of probes fromfront.
• Self-sealing valve on disengaging the probe (Quickdisconnect)
• Smooth quiteaction.
• Non return valve for on line servicing/repairing
• Indexed to eliminate inter-changeability of gasservices
• Color-coded gas specific frontplate
• Totally leak proof, safe & easy tooperate
• Configurations possible: surface, flush &Bead-head.
• Outlet should be European CE certified or American ULlisted
• All outlets should have respective labels (i.e.O2/N2O/CO2/Air4/Air7/Vacuum/ AGSS/etc.)
-
-
-
... More
Oxygen Gas
33
6903
227799
... More
Medical Air-4
7
6903
48321
... More
Nitrous Oxide
2
6903
13806
... More
Vacuum
25
6903
172575
... More
Carbon Di-Oxide
5
10502
52510
... More
Supply, installation, testing and commisioning of Bed Head Panel. The bed head panel size is to be 1200mm and made-up of extruded aluminum with provision of medical gas terminal outlets and attached with electrical switch sockets. Ther should be rail for support to mount necessary medical equipment upon it.
9
28910
260190
... More
Supply, installation, testing and commisioning of Double Arm Motorized Pendant provided With 2 x O2, 1 x N2O, 2 x Air 4, 2 x Vac, 1 x CO2 and 8 nos. of Electrical switch-sockets:
The pendant shall comply with all relevant Hospital Technical Memoranda (HTM), Hospital Building Notes (HBN) and British Standards (BS) as well as ISO11197:2009. It shall be CE marked with the notified body number specified. It shall be provided with a copy of the certificate of origin. The system shall be provided as factory assembled modules for single or double arm configurations. The pendant frame shall be constructed from extruded aluminum alloy 6063 T6. The end caps should replicate the profile of the vertical head. The aluminum extrusions used to contrast the pendant shall be of approximate wall thickness not less than 3.5 mm. The external surfaces should be antibacterial paint which ensures 100% shied against infectious agent. The pendant lids shall be removable to allow access to the aluminum sections. Segregation shall be provided within the side sections to ensure that services are not accessible when removing the lids. The arm section should present at last two points with a minimum thickness of 170 mm in order to guarantee adequate load bearing of the complete system. The arms will be supplied with ABS heads with LED backlighting signaling. The pendant shall have possibility to mount directly on the body DIN rails for accessories if needed at least two joints of the arms with brakes, electromagnetic barke released. It should have 2 arms 1000mm and 900mm total 1900mm. It should have 180kgs weight bearing capacity of the arms. It should have not less than 180 kgs for 1900 mm total length double motorized arm. It should one vertical 1500mm column to mount gas outlets and electrical. It can rotate from 0 to 330 degree. The control of air brakes must be done using the holder release. All shelves and drawers shall be in acrylic material, 100% non-porous for perfect hygienic control. In case of motorized system the travel time shall be of 27 seconds with a +/- 10% tolerance. It should be supplied as a fully wired and tested module. The devices are made in compliance with EC CERTIFICATE 1548/MDD Directive 93/42/EEC concerning medical devices Annex II. The equipment should be considered class IIb. It should be IP 20 Classification according to the degree of protection against penetration of liquids and external agents. It should have protection provided on external power circuit which provides adequate protection with circuit breakers or fuses dimensioned accor¬ding to the power indicated on the label. This shall be supplied in compliance with the 93/42/CE regulation. Pendant shall fully meet the essential requirements for emissions and immunity as defined within BS EN 60601-1-1 and ISO standards. It should have vertical pole made of stainless steel with support of aluminum and IV stand with 4 Hooks. It should have one Shelf BIOCLEAN made of Solid Material for ceiling pendant with handle and 2xDIN rails (L530xW460mm) (capacity load 40Kg). It should have Electromagetic Brakes with LED barke lights
900-1000mm single column length
Double Arm Anaesthesia pendant. The head of the pendant should move the machine up & down.
The weight carrying capacity of the arm should not be less than 180 KG.
Each arm should be capable of 330 degrees of rotation, which can be easily adjusted to suit the desired mode of operation.
Should have breaklight indicator LEDs. Each pendant should have: Pre piped 10nos. HTM02-01 standards complies BS gas outlets points with NIST connection. Terrminal units shall have gas indexing geometry. Other gas specific indexing geometries are not acceptable. Terminal unit front fascia should be metal and it should be hundred percent metal. Gas specific components comprising the terminal unit second fix shall be manufactured from die-cast zinc alloy or similar hard wearing metal. Plastic components are not acceptable. Terminal units socket castings shall be permanently coated with a low friction fluoropolymer for maximum reliability and service life. The terminal unit socket die-casting shall incorporate a gas indexing pin to overcome the risk of loosening due to rough handling or abuse. The second fix socket shall incorporate a sheer-plane to safeguard the first fix and pipeline in the event of accidental damage or bed jacking. Gas specific components shall incorporate the gas identity marking permanently stamped or cast into the component surface. The first fix shall be all metal construction, with a brass base block and copper stub pipe. The first fix shall incorporate an integral check valve to enable servicing of the second fix and valve seals without isolation of the gas supply. Probe roller pins shall be manufactured from stainless steel. Wall mounted terminal units shall be provided with white ABS mounting box with matching fascia. The mounting box shall have smooth rounded corners to avoid the possibility of injury. A bezel shall be available to cover the plaster edge, provide a neat and easily to clean finish.
1
1050200
1050200
... More
Supply, installation, testing and commisioning of Area Valve Box including Valve. It should fully complies and meets with the requirements of the Health Technical Memorandum 02-01 (HTM 02-01) standards only. It should have NIST Connection & Single Service for Vacuum with NIST Connection.
It should be made up of Aluminium extrusion profiles with aluminium alloy 6063 temper T6. It should be manufactured from Virgin Aluminium’ no scrap added in aluminium). All sections are anodized aluminium except top plate. he top plate will be aluminium powder coating (high quality). The Area Valve Service Unit (AVSU) should incorporate a ball value with NIST connectors either side, mounted in a lockable box with emergency access. The value should be complete with copper stub pipes that extend to the outside of the box to enable easy connections to the Medical Gas Pipeline System (MGPS).
-
-
-
... More
Area Valve Box 4 Gas service
1
12154
12154
... More
Area valve Box 5 Gas service
1
15576
15576
... More
Supply, installation, testing and commisioning of Medical Gas Area Alarm 5 Services.
It should complies with HTM02-01/NFPA99C Standards.It should be USFDA/European CE Certified with 4 digit notified body number or ETL Listed/UTL Listed.The LCD alarm shall be microprocessor based with a 10" (25.4 cm) screen and capable of monitoring medical gases. Each gas service shall be provided with a digital read-out comprising of 0-249 psi (0-1,717 kPa) for pressure and 0-30"Hg (-100-0 kPa) for vacuum.The digital read-out shall provide a constant indication of each gas being measured, indicating a green “NORMAL” and a red “HIGH” or “LOW” alarm condition. If an alarm occurs, the green indicator will change to red and a continuous audible alarm will sound. Pushing the (mute button/push to test button) will cancel the audible alarm, but the unit will remain in the alarm condition until the problem isrectified. The box mounting brackets shall be adjustable to accommodate for different wall thickness. LCD alarm on a computer screen via the facility's ethernet or internet. In addition, an exact image of the alarm can be displayed on a mobile device. The LCD Alarm will update its status every second. It should have self-diagnostic and error message display for ease of maintenance. It shall have sensor,that mounted locally (in the rough-in box) by installing the copper pipe provided or mounted remotely. Sensors will be automated for gas specific detection. Each sensor unit is gasspecific,with an error message display for an incorrect connection.Each sensor unit is gas specific, with an error message display for an incorrectconnection.
1
184080
184080
... More
Supply, installation, testing and commisioning of 32” HD monitor with Monitor Arm. It should be 32” High Definition Progressive Scan Flat-panel Medical Grade Monitors with ceiling mounted spring arm suspension to support high definition/HDTV progressive Scan images and should be able to support and display DVI/HDTV, RGBHV, S-Video, Composite video signals. Aspect ratio16:9/16:10. Resolution 1920X1080 or better. The flat Panel suspension should be ready with the cables for integration of High Definition Digital(DVI/HDTV), RGBHV (High Resolution), SVHS (S-Video), Composite video signals to travel from the various sources of video like endoscopic camera, room camera, in light camera, high definition flat panel monitors, while assuring native resolution / signal. Monitor should capable of displaying from other sources like endoscope, microscope etc. necessary provision should be provided as standard. It should be Medical Grade Class-1 Device and European CE Declaration of Conformity to be provided. 1 SDI Input Signal and 2 SDI Output Signal in all Monitors. It is mandatory to provide YPbPr to SDI Converter and 1SDI input to 2 SDI output Converter. HD Flat Panel Monitor should be done according to IP 54 regulations. ESG Safety Glass Cover is must to protect the Monitor Screen from breakage and for additional Safety of Patient. For optimizing the quality of Pictures, it should have DicomPreset, BT 709, BT 1886 features. Video Connectors on the back side of Monitor is to be hide by Cover of Aluminum from the Back side of Monitor. Monitor should be integrated by Command Bar shown in the front side of Monitor. It should be USFDA / European CE Certified. Automatic Lumination Stabilisation (ALS) with backlight sensor, precalibrated to 300 cd/m2, or 250 cd/m2 for DICOM preset. OSD control (remote configuration) GPIO (9 pin). Automatic Lumination Stabilisation (ALS) with backlight sensor, precalibrated to 300 cd/m2, or 250 cd/m2 for DICOM preset. Backlight life 50,000 hours. Pixel defect class Class II (ISO 9241-307). Signal inputs 3G-SDI, CVBS/FBAS, S-Video (Y/C), component (YPbPr)/RGB, VGA, DisplayPort (1.2), 2 x DVI-D. Screen saver, user presets, Automatic Lumination Stabilisation (ALS), picture-in-picture (PIP, POP), DICOM preset, BT709, BT1886. Product safety EN 60601-1:2006+A1:2013. Electromagnetic compatibility EN IEC 60601-1-2:2007. Immunity EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11. Emission EN 55011 class B, IEC/CISPR 11:2009 modified, EN 61000-3-2, EN 61000-3-3. WEEE Category Category 2 (display with 100 cm2)
3
814200
2442600
... More
Supply and installation of SS 304 Puff Panel for Ceiling and wall. It should have CE compliance under Class 1 Medical devices directive. Copy of valid certificate must be submitted. The 30mm thck for wall & ceiling panel will be constructed using SS304 stainless steel 0.8mm thk sandwich panel with core consisting of rigid polyurethane foam, which has been injected under high pressure, with a minimum density of 40 kg/m3 and back side with 0.8mm PPGI sheet.The gaps between panels shall be suitably filled with metal filler/epoxy and sanded flush.
-
-
-
... More
Wall Panel
75
12390
929250
... More
Ceiling panel
50
11210
560500
... More
Providing and applying Antibacterial Coat Paint for SS Ceiling and Wall.
Anti-bacterial and Anti-fungus fenomastic coating will be applied on the SS finished walls & ceiling with at least 2/3 coats to achieve a thickness of minimum 200 micron. It should have low VOC content to ISO 11890-2. Resistance to fungus rating-1 and bacteria growth reduction as per ISO 22196:2011. The Primer will be supplied along with the paint and will be imported. The primer will be applied prior to coating of Anti – bacterial & Anti- Fungus sterlite paint on SS walls & ceiling. Sterile coating and primer will be applied on the surface by roller/ air less spray gun. Sterile coating will be to withstand with commonly used cleaners in the operation rooms and even withstanding with regular steam cleaning.
125
209
26232.5
... More
Supply, installation and testing of Laminar plenum with size 2400x2400mm made of alluminium. Without HEPA filters. To be installed on the centre of SS panel false ceiling.
It should be constructed out of aluminum 2mm thk sheet of size 2400 x 2600mm Light diffuser made out of two layer of mono filament precision woven polyester for the plan air ceiling to give diffused shadow less LED lighting system. The intensity of luminance by using high frequency electronic LED and dimmable Ballast. All ceilings incorporate supports to secure them to the main structural frame of the room. or structural slab. It should complies with ISO14644-1 clean room class, certifications must be submitted. It should be CE compliance under medical devices directive class-1.
1
371700
371700
... More
Supply, installation and testing of Perpheral Lights:
It should be fitted outside the air ceiling system area and flush with the ceiling in the operation theatre suitable to required illumination (450-500 Lux) of OT. Peripheral lights should be LED based (Size-2ft x 2ft approx. size ) and clean room luminaries fitted in the frame should be 8 in numbers for each OT. The fluorescent lamps / Non-hygroscopic high glow low power LED based peripheral lights having high quality low wattage LED lighting system with highly spectacular anodized Aluminum reflectors and optical antiglare system for adjustable light distribution. Luminaire cover made of highly resistant, disinfectant proof laminated safety glass with fine grained surface, glass pane with white powder coated steel frame. The light fitting should be uniformly and aesthetically distributed on the ceiling to provide uniform illumination in the OR. Peripheral lighting should be done according to IP65 protocol.
8
25370
202960
... More
Supply, installation, testing and commisioning of Medical grade HD Monitor control panel.
The control panel should be touch screen panel. This control panel should work as the central control panel for the HVAC controls, instruction board, light control, gas alarms,telephone etc. Screen sized should not be less than 20-21 inches. The panel should be designed to cope with changing technology and equipment in operating environments. Control panel should be user friendly and ease of operating and maintaining purpose. It should be flush to wall touch screen application for operating theatres, protected by a glass surface that enhances its features and performance in a critical environment of an operating room, coplanar to the finish panel (with the exception of the panels with metallic finish. The medical gas alarm should indicate high and low gas pressures for each gas service present in the OT including vacuum. This should be supported by audible alarm also. The panel should have an alarm mute (fault annunciation) facility. The sensors (pressure switches) should be at the nearest isolation valve. Control for general lighting: ON/OFF and dimming controls organized in groups to provide uniform illumination. For peripheral lighting management with DALI protocol. Humidity and temperature sensor, 1 x Differential atmospheric pressure sensor for ambient. The electrical wiring untill actuator and HVAC whould be in hospital scope. It should be European CE certfied with 4 digit notified body no or UL or ETL Listed. MAke-LM Medical-Italy/Nexor-Germany/SHD-Italy/Rein Medicaly-Germany.
1
643100
643100
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%