Tourism Department Tender
View complete overview of Chandigarh DTCA Tender
Tourism Department - DTCA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date1 Jan 2025
Closing Date20 Jan 2025
Tender Amount₹ 2,02,46,024.41
Costs
EMD
₹ 2,03,000Document Cost
₹ 10,000Tender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DTCA_132172_1Tender No
BID NO. 44Tender Authority
Tourism Department ViewPurchaser Address
-Website
http://eproc.punjab.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications
4918.07
125
616561.47
... More
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
4918.07
22
108804.97
... More
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
4918.07
163
803084.27
... More
Scraping brushing to remove paint to base metal surface
433.08
106
46081.23
... More
Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even andsmooth complete in all respect as per thedirections of Engineer-in-charge.
126
297
37432.96
... More
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
433.08
25
10949.99
... More
Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work
433.08
65
28287.49
... More
Polyurethane polish (PU) two or more coats to give required finish including two coat of wood sealer Including Preparation of surface/base complete as per specification
28.32
1444
40903.95
... More
Painting two or more coats Italian Pigmented PU white glossy or matt in all shades on wood work surface to give an even shade Including
100
1431
143170.65
... More
12.5mm thick cement plaster 1:4
400
199
79644.6
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge
175.8
48
8519.27
... More
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (a) ISI designation no I (Size of door up to 700mm)
15
1039
15597.07
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats
100
370
37083.2
... More
(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
150
387
58153.2
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on one side.
100
1007
100714.6
... More
Providing & fixing 32mm thick factory made Internal solid door shutter consisting of solid core particle board of 24mm thickness, lipped with 15mm (5mm x 3) thick x 32mm width on one stiles & top rails & 10mm (5mm x 2) thick x 32mm width on the other stiles & Bottom rails. The panel laminated with 4mm thick termite proof, water proof & fire resistant PVC sheet both side using rubber adhesive on flush door & solvent Cement adhesive on the PVC lipping etc. complete as per manufacturer's specification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-incharge.
26.4
4204
110999.29
... More
Providing Polyester Powder coating 50 micron any coloured specified to alumnum fittings various sizes including carriage of material from market to workshop & workshop to site of work..
-
-
-
... More
Tower Bolt 100mm to 300 mm Long
50
17
895.5
... More
Sliding Bolt all Sizes
50
26
1317
... More
Handles all Sizes
50
23
1159
... More
Door Stopper
50
13
685
... More
Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involed and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
35.78
191
6859.39
... More
Cement concrete with1:4:8 (b) with stone ballast 40mm (ii) mixing by mechanical means using concrete mixer volumetric type
3.59
3812
13687.29
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
5
5697
28486.64
... More
Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure
5
6487
32437.25
... More
First class burnt brick work laid in cement, sand mortar 1:4 in foundation and plinth
5
5382
26911.66
... More
First class burnt brick work laid in cement, sand mortar 1:4 in first story upto 4 metre above plinth level
4
5526
22106.64
... More
shuttering for face of concrete foundation and foundation beam
32.4
221
7168.01
... More
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
11.88
502
5969.93
... More
Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
22.4
560
12554.35
... More
Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete
300
79
23918.66
... More
Deodar wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position (a) Panelled, glazed or glazed and panelled. (i) 40mm thick (Single Leaf)
1
5570
5570.91
... More
Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing
1500
749
1123560
... More
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
551.49
68
37764.51
... More
Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm
1400
163
228609.5
... More
Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ). 600x600 mm size
271
789
213838.38
... More
Providing and fixing face Tiles 230 x 75 x17 mm machine made vibro-hydraulic compacted Burnt Clay brick Tile silicon coated on one side (Colour Terracotta series) on wall with under layer of 12 mm thick cement plaster 1:3 and jointed with neat cement matched with pigment complete as per drawings, specifications and to the entire satisfaction of engineer- in- charge.
15.6
1771
27643
... More
Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.
3.5
3453
12086.8
... More
Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.
140.35
531
74594.83
... More
Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade
2099.79
84
176970.53
... More
Providing and fixing mineral fibre false ceiling tiles at all heights With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
300
1955
586588.8
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ role form G.I. sheet with zinc coating of grade 175 consisting of floor and ceiling channel 50mm wide having equal flanges of 32mm and 0.5mm thick fixed to the floor and ceiling at the spacing of 610mm centre to centre with dash fastener of 12.5mm diameter,40mm length and the studs 48mm wide having one flange of 34mm and other flange 36mm and 0.50mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610mm centre to centre by 6mm dia bolts and nuts at both ends of partition fixed flush to wall with rawl plugs at spacing 450mm centre to centre and fixing of boards to either side of frame work by 25mm drive all screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, joint finisher and two coats of primer suitable for board as per manufacture’s specificatior and direction of engineer-in-charge all complete.
220
1262
277660.46
... More
Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 Metres lead
-
-
-
... More
With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm
80
158
12642
... More
EXTERNAL IN THE GROUND : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in Charge), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includesjointing of pipes & fittings with one step CPVC solvent cement, & testing of oints excluding cost of excavation complete as per direction of Engineer-in-Charge.
-
-
-
... More
CPVC SDR 11 Pipe & fittings 20mm o/d
15
233
3497.85
... More
CPVC SDR 11 pipe & Fittings 25mm o/d
50
301
15052
... More
CPVC SDR 11 pipe & fittings 32mm o/d
20
403
8064.6
... More
CPVC SDR 11 pipes & fittings 0/d 40mm
19
532
10113.7
... More
CPVC SDR 11 pipe & fittings 50mm o/d
9
790
7118.64
... More
Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.
-
-
-
... More
Door Elbow 90 Degree (All side socketed)
14
338
4736.34
... More
Elbow 90 Degree (All side socketed)
18
316
5690.16
... More
Vent Cowls
2
71
142.72
... More
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.
-
-
-
... More
110mm o/d single socket SWR UPVC pipe lines laid complete
120
313
37646.61
... More
90mm o/d single socket SWR UPVC pipe lines laid complete
20
268
5376.64
... More
Supplying and fixing rolling shutters, of approved make, made of 80mmx1.25mm, M.S. Laths, interlocked together through their entire length and jointed together, at the end, by end locks, mounted on specially designed pipe shaft, with brackets, side guides, 27.5cm long wire spring grade No. 2 and arrangement for inside and outside locking with push and pull operation complete, including top cover 0.80mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed)
16
2946
47146.24
... More
Office table -SIZE : 1800X900X750 mm. L Shaped side drawers Minimum three drawers with two locker. Material – Compressed Wood panels with laminated melamine surface.Surface shall be scratch proof .Specify Load Carrying Capacity. complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
2
25000
50000
... More
Premium Office Chair-Leather seat and back Revlbing type.PP fixed armrests for stable arm support.steel frame for durability.Sleek and modern design for a professional look.Ideal for officer in office spaces.Width (cm) 59Depth (cm) 58Height (cm) 98.5(Nilkamal, Supreme,EEZYor equlant)complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
2
12000
24000
... More
Visitor Chair-PU foam seat and back with fabric upholstery.PP fixed armrests for stable arm support.Powder-coated mild steel frame for durability.Sleek and modern design for a professional look.Ideal for visitors and guests in office spaces.Width (cm) 59Depth (cm) 58Height (cm) 98.5(Nilkamal, Supreme,EEZYor equlant) complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
2
8000
16000
... More
Roller Blinds for Windows: Deco Window presents non-blackout roller blinds to keep your space cool while having a certain level of blackout for privacy. Perfect choice for home and office The fabric is soft to the touch with a user-friendly plastic pull-down chain for effortless usability roller sunshade comes with the necessary installation brackets and mounting hardware for quick and easy installation; 1 x Roller Shade 1 x Plastic Cord/Chain 2 x Bracket (Can be fixed on wall or ceiling) 4 x Screw 4 x Fisher Useful Tips: Mount Type: Inside Mount (Blind Width = Window Width - 0.2 Inches) Outside Mount (Blind Width = Window Width + 4 Inches (or more for better coverage)) Shade width refers to total roller width including hardware , not for the width of the fabric. About 1.4 inches less than the width of the fabric shade because of the mounting hardware on each side which takes up about 0.7 inches of space on either side
10
2000
20000
... More
Almirah -Size -3' x1'.6" x 6'.(Wooden material) Three Door Compact Wardrobe.Without Drawer, Without Mirror, No Hanging Area, Columbia Walnut. With locking system.complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
6
14500
87000
... More
Host Chair-made up of solid mp teak wood finished with clear pu polish on it. This chair will be with any nails. Cane will be at the back and upholstery at the seating platform. Fabric will be matching to the tone of the interiors complete as per drawings, specifications and entire satisfaction of Engineer-in- charge.
1
22000
22000
... More
Meeting Chair-High Back Leatherette Office Revolving Chair.Fabric will be matching to the tone of the interiors complete as per drawings, specifications and entire satisfaction of Engineer-in- charge.
4
10000
40000
... More
VVIP Sofa 7 seater leather/SS -Stainless Steel and Leather Black 7 Seater Office Sofa Set.Color Matching with the interiors ,Seating Capacity 7 Seater,Seat Material Leather,Clearance From Floor 6 Inch, Portable,Frame Material Stainless Steel.complete as per drawings, specifications and entire satisfaction of Engineer-in- charge.
2
35000
70000
... More
Computer Table -Wooden Office Table Suitable for Study/Computer work(Size-61D x 121.9W x 76.2H Centimeters)Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
8
6500
52000
... More
Peg/ Side Table.Brown Wooden Round Meeting Room Table, Warranty:, Size: 4' X 4'.Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
2
4200
8400
... More
Carpet-Non Woven Carpet Floor Covering Carpet is a soft, cushioned surface that provides comfort underfoot and absorbs sound, making it a good choice for areas where noise reduction is desired. Carpet Tiles Flooring provides a non-slip surface, making it a safe choice for areas where there is a risk of slipping.(4mm thick).Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge.
20
450
9000
... More
Three seater waiting chairs -3 Seater MS with Powder Coating Waiting Chair with Cushion.Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
5
13000
65000
... More
Crookery for 24 Person (Tea cup,Plates,Spoons, Cattel, Service tray,Air tight cotainer 6"(3 nos) etc. Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge
1
18000
18000
... More
Cooking equipments /range - Induction stove( Baltra, Glen),2 steel Tea Making Pan with cover,Steel cotainer 9" (3 nos), Tea Strainer etc Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge.
1
9000
9000
... More
Water Dispenser 3 in one -Hot Normal and Cold Floor Standing Water Dispenser is a versatile water dispenser that provides hot, normal, and cold water options (Atlantis,Blue star,Honey well or equalent)Complete as per Directions, specifications and entire satisfaction of Engineer-in- charge.
1
15000
15000
... More
Electrical
-
-
-
... More
Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- CSR 34.01
-
-
-
... More
Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.
5
826
4133.93
... More
Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- CSR 34.01
-
-
-
... More
Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).
5
707
3539.76
... More
Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- CSR 34.01
-
-
-
... More
Wiring Telephone socket point RJ11 (one module)
20
355
7104.8
... More
Wiring Networking socket point RJ45 (one module)
5
461
2307.17
... More
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- CSR 34.02
-
-
-
... More
Wiring fan point (Without fan box)
10
1091
10916.89
... More
Wiring light point
15
762
11437.06
... More
Wiring call-bell point
5
744
3720.17
... More
Wiring 6Amp. Plug control comprising wall socket point
10
371
3713.59
... More
Wiring 16/20Amp. power plug control point
5
478
2390.13
... More
Wiring light point without control switch.
30
334
10034.59
... More
Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:- CSR 34.07 A
-
-
-
... More
Wiring fan point (Without fan box)
5
1114
5570.38
... More
Wiring light point
10
711
7111.13
... More
Wiring 6Amp. Plug control comprising wall socket point
5
395
1975.31
... More
Wiring 16/20Amp. power plug control point
2
501
1003.46
... More
Wiring light point without control switch.
20
348
6979.44
... More
Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01) CSR 34.08
-
-
-
... More
Wiring fan point (With fan box)
10
886
8862.04
... More
Wiring light point
10
475
4753.39
... More
Wiring 6Amp. Plug control comprising wall socket point
7
369
2584.02
... More
Wiring 16/20Amp. power plug control point
5
553
2768.6
... More
Wiring light point without control switch.
25
166
4171.86
... More
Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface):- (Derived From CSR 34.03) CSR 34.08 A
-
-
-
... More
Wiring fan point (With fan box)
10
707
7079.52
... More
Wiring light point
10
367
3678.82
... More
Wiring 6Amp. Plug control comprising wall socket point
7
194
1362.81
... More
Wiring 16/20Amp. power plug control point
5
238
1194.67
... More
Wiring light point without control switch.
30
137
4133.93
... More
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- CSR 34.09
-
-
-
... More
Overall size 1sq.mm (Un-sheathed)
500
19
9586.85
... More
Overall size 1.5sq.mm (Un-sheathed)
950
24
23419.3
... More
Overall size 2.5sq.mm (Un-sheathed)
950
36
35128.96
... More
Overall size 4sq.mm (Un-sheathed)
950
53
50741.83
... More
Overall size 6sq.mm (Un-sheathed)
450
73
33280.07
... More
Overall size 10sq.mm (Un-sheathed)
500
120
60260.2
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- CSR 34.10 B
-
-
-
... More
Overall size 6sq.mm (4Core) Armoured (Loose)
750
119
89876.72
... More
Overall size 10sq.mm (4Core) Armoured (Loose)
50
146
7308.66
... More
Overall size 16sq.mm (4Core) Armoured (Loose)
100
161
16197.56
... More
Overall size 25sq.mm (4Core) Armoured (Loose)
200
202
40559.75
... More
Overall size 35sq.mm (4Core) Armoured (Loose)
200
256
51358.12
... More
Overall size 50sq.mm (4Core) Armoured (Loose)
200
326
65317
... More
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- CSR 34.10 C
-
-
-
... More
Overall size 6sq.mm (4Core) Un-armoured (On-Surface)
200
102
20543.25
... More
Overall size 10sq.mm (4Core) Un-armoured (On-Surface)
300
123
37135.88
... More
Overall size 16sq.mm (4Core) Un-armoured (On-Surface)
400
151
60576.25
... More
Overall size 25sq.mm (4Core) Un-armoured (On-Surface)
200
193
38716.13
... More
Overall size 35sq.mm (4Core) Un-armoured (On-Surface)
100
243
24362.19
... More
Overall size 50sq.mm (4Core) Un-armoured (On-Surface)
100
310
31078.25
... More
Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- CSR 34.12
-
-
-
... More
Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface)
1000
47
47196.8
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)
1000
57
57521.1
... More
Heavy Gauge PVC Conduit Pipe 20mm dia. (Flushed)
500
60
30235.45
... More
Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)
500
70
35397.6
... More
Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- CSR 34.12 (xxv)
-
-
-
... More
PVC Flexible Pipe 20mm dia.
400
12
5056.8
... More
Supply & erection of PVC Casing 'n' Capping (Double Lock) ISI marked for wiring purposes including cost of bends (L), (U), (T) & inspection boxes etc., where necessary including other petty material:- CSR 34.12
-
-
-
... More
PVC Casing 'n' Capping Size 50mm x 16mm
200
90
18078.06
... More
Earthing with 8 SWG (4mm dia.) electrolytic copper wire thimbled (1No. copper thimble with suitable size steel bolt, washers & double nut) with 30cm x 60cm x 2mm thick copper plate (made cylindrical) burried below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) recessed in wall and in floor etc., up to suitable Length in metre (including bore Length). G.I. pipe 20mm dia. (A-class) of suitable Length should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- CSR 34.14
-
-
-
... More
Earthing with 8 SWG (4mm dia.) copper wire thimbled with 30cm x 60cm x 2mm thick copper plate burried 4.50 metre (14.76 feet) below ground level (up to 8metre in Length) with G.I. pipe 20mm dia. (A-class), 3metre long
20
8471
169436.51
... More
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- CSR 34.14 (v)
-
-
-
... More
Additional Length 25mm x 3mm thick Copper Tape
60
637
38229.41
... More
Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- CSR 34.15
-
-
-
... More
6/10amp. One Way Modular Switch (One Module)
50
44
2241.32
... More
16/20amp. One Way Modular Switch with Indicator (One Module)
15
96
1453.83
... More
6/10amp. One Way Modular Bell Push (One Module)
10
69
690.57
... More
6amp. 2/3 Universal Modular Shuttered Socket (two Module)
25
67
1696.14
... More
16/20amp. Universal Modular Shuttered Socket (two Module)
15
121
1817.29
... More
Step type Modular Electronic Fan Regulator 100watts (One Module)
10
245
2459.4
... More
Step type Modular Electronic Fan Regulator 100watts (Two Module)
10
299
2992.47
... More
Modular Telephone Socket (RJ-11) One Module
10
63
629.99
... More
Modular RJ-45 Modem Jack for Computer (One Module)
20
179
3586.11
... More
Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- CSR 34.15
-
-
-
... More
Modular Cover Frame One or Two Module
10
50
501.47
... More
Modular Cover Frame Three Module
10
64
648.96
... More
Modular Cover Frame Four Module
10
72
722.7
... More
Modular Cover Frame Six Module
12
92
1115.02
... More
Modular Cover Frame Eight Module
10
122
1224.17
... More
Modular Cover Frame Twelve Module
5
175
877.57
... More
Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface):- CSR 34.15
-
-
-
... More
Powder Coated Concealed Metal Box with Brass Lugs One/Two Module
10
78
781.7
... More
Powder Coated Concealed Metal Box with Brass Lugs Three Module
10
87
870.19
... More
Powder Coated Concealed Metal Box with Brass Lugs four Module
10
98
988.18
... More
Powder Coated Concealed Metal Box with Brass Lugs Six Module
12
122
1469
... More
Powder Coated Concealed Metal Box with Brass Lugs Eight Module
10
135
1356.91
... More
Powder Coated Concealed Metal Box with Brass Lugs Twelve Module
5
184
921.81
... More
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- CSR 34.16 A
-
-
-
... More
MCB Single Pole 6-32amp. (10kA, Curve-C)
25
190
4764.45
... More
MCB Single Pole 40amp. (10kA, Curve-C)
20
395
7907.57
... More
MCB Double Pole 6-32amp. (10kA, Curve-C)
20
580
11605.36
... More
MCB Double Pole 40amp. (10kA, Curve-C)
20
789
15786.7
... More
MCB Triple Pole 6-32amp. (10kA, Curve-C)
5
860
4302.23
... More
MCB Four Pole 40amp. (10kA, Curve-C)
5
1531
7658.68
... More
MCB Four Pole 50, 63amp. (10kA, Curve-C)
5
1750
8753.79
... More
Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- CSR 34.16 C
-
-
-
... More
RCCB Four Pole 63amp., Sensitivity 30mA
5
2902
14514.07
... More
RCCB Four Pole 63amp., Sensitivity 100mA
5
2983
14919.93
... More
RCCB Four Pole 32/40amp., Sensitivity 300mA
5
2778
13890.13
... More
RCCB Four Pole 63amp., Sensitivity 300mA
5
3034
15174.35
... More
Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 34.17
-
-
-
... More
TP&N Horizontal Double Door Distribution Board 12 way each
7
5948
41640.11
... More
TP&N Vertical Double Door Distribution Board 12 way each
7
10689
74825
... More
Designing, Supply, Erection, Testing & commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of control panel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCA type. The base channel will be made out of 75 x 40 x 5mm rolled channel.
-
-
-
... More
The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The panel door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. Minimum depth 400mm / wide 300 mm for busbar/ Cable ally at the front of the panel. The panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc.
-
-
-
... More
The fabrication should be such that all the member i.e. vertical/horizontal should be detachable type i.e. total bolted. In case of any changes required at site. it should be possible then and their self without any cutting or welding. The fabrication of the panel in 3B construction fully compartmentalized type i.e. bus bar chamber as well as the cable chamber should be totally isolated from the feeder chamber. Where there crossing of the wire or bus links. It should have proper rubber gourmets or non-hygroscopic material. No live part should be in visible condition.
-
-
-
... More
Painting:- The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work . Busbars:-The panel shall be provided with TPN aluminium busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity (53% to 58%) E91-E Grade aluminium (1A/Sq.mm). All Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only with proper adjustable cable supports. The main busbar would be supported upon non-hygroscopic SMC/DMC supports.
-
-
-
... More
Metering:-The panel shall be completed with digital metering unit (with selector switches, voltmeter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & L.E.D. type indicator etc. Manufacturer of Panel should be CPRI Approved (Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO 9001: 2015 standard) The Concerned contractor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.
Detail of capacities of MCCB's to be installed in the cubical panel Enclosure (Excluding the cost of MCCB's) as per following:- CSR 34.23 A
-
-
-
... More
LT Panel enclosure having space for 1No. Incomer MCCB 160Amp. and 4Nos. outgoing MCCB's 40amp. to 100amp. according to the requirement at site (Approx. size 1825 x 900 x 300mm)
1
62616
62616.46
... More
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- CSR 34.23 B
-
-
-
... More
MCCB Four Pole 160amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting
1
11260
11260.86
... More
Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- CSR 34.25
-
-
-
... More
Cable Tray Size 150mm x 50mm x 50mm (2mm thick)
300
1066
319905.81
... More
S/E of LT Cast Resin type/ Heat Shrinkable Termination Kit for Outdoor/ Indoor supply of 1.1 KV grade PVC/XLPE cable as desired by the Engineer in charge of the site:- CSR 34.34 A
-
-
-
... More
Outdoor/Indoor Cast Resin Type Termination Kit for Cable Size 3 Core 240 sq. mm - 300 sq. mm
2
1369
2739.1
... More
Supply and erection of insulators confirming to IS-2544 & 5350 (Test Certificates of CPRI) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. The job is to be completed as approved by Engineer-in-charge:- CSR 34.35
-
-
-
... More
Egg/ Strain Insulator
4
116
467.75
... More
11kV Pin Insulator with G.I. Pin
3
212
638.42
... More
11kV Disc Insulator
3
622
1867.86
... More
Shackle Insulator (Medium)
2
165
330.8
... More
11kV Lightning Arrester with clamps of required size (With seprate earth)
3
3538
10616.12
... More
Supply and erection of Stay Set consisiting of 19/20mm dia.of suitable length G.I. stay rod duly threaded upto 300mm at one end and shaped on the other end. MS plate size 30cm x 30cm x 6mm with 20mm dia. hole drilled in the centre of the plate G.I. stay wire size 7/10 SWG, G.I. thimble for stay binding, Egg/Strain insulator, MS elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by Engineer-in-charge. Stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size MS flat with required number of nut and bolts 16mm dia. on one end and shall be embedded on the other end. The stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042Cum. The job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved/desired by the the Engineer-in-charge:- CSR 34.35 (ii)
-
-
-
... More
Stay Set consisiting of 19/20mm dia., 1.8 metre Long G.I. Stay Rod
4
2748
10994.33
... More
S/E of Heat shrinkable cable end termination/ Straight through joint kit for 11 KVA /6.6 KV (E) XLPE Cables as approved & desired by Enginer in charge:- CSR 34.36 C
-
-
-
... More
Heat Shrinkable End Termination for cable size 120-185 sq. mm, 3Core (Outdoor Type)
1
4594
4594.31
... More
Heat Shrinkable End Termination for cable size 240-400 sq. mm, 3Core (Outdoor Type)
1
5473
5473.35
... More
Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- CSR 34.37 A
-
-
-
... More
Double Walled Corrugated HDPE Pipe 63/ 51mm (Outer/ Inner dia.)
1780
155
277534.04
... More
Double Walled Corrugated HDPE Pipe 90/76mm (Outer/ Inner dia.)
300
199
59733.45
... More
HT & LT LINE ITEMS: 34.38
-
-
-
... More
Supply & erection of 11kV GO switch confirming to ISI specifications. The item includes supply and erection of operating pipe and handle arrangement of MS flat 50mm x 6mm and channels 75mm x 40mm sheet. The GO switch is to be fitted with locking arrangement so as it locks upward on 'ON' position and locks downward in 'OFF' position. The entire GO switch assembly/unit should be properly earthed and the job is to be completed as approved by Engineer-in-charge.
1
11360
11360.1
... More
Supply & erection of 'D' iron clamp 50mm x 6mm flat iron complete with fixing bolts and nuts (16mm x 200mm) including making holes in the pole as approved by Engineer-in-charge.
2
197
394.43
... More
Supply & erection of 'V' shape cross arm of MS channel 75mm x 40mm as per standard drawing. The item include supply and erection of half clamp made out of 50mm x 6mm flat including cost of nut and bolts as approved by Engineer-in-charge.
2
688
1377.98
... More
Supply & erection of 11kV Top Hamper made out of MS flat 50mm x 6mm as per standard drawing. The item includes supply and erection of nut and bolts (19mmx 125mm) as required. The job is to be completed as approved by Engineer-in-charge.
2
415
831.84
... More
SITC of Ultra modern slim recessed mounting 2x2 pannel 36 watt (100 lm/watt) luminare with high performance LEDs, suitable for mounitng with Armstrong /Grid ceiling/ POP/Gypsym ceiling. Make : Havells, Phillips Wipro or equivalent. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge. (Note:- the CT of fixture may vary during in execution time and including in same price.)
60
4945
296715
... More
SITC of 18 watt recessed downlighter luminare elegantly designed sleek recessed mounted pressure die-cast aluminium powder coated white finished in round profile with optimized heat sink for efficient heat dessipation. Make : Havells, Bajaj, Surya or equivalent. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge. (Note:- the CT of fixture may vary during in execution time and including in same price.)
95
1435
136359.2
... More
SITC of 50 watt Victoria LED post top light fixture with Design from the renaissance era yet with a modern look using new generation technology in LED to enliven your outdoor areas in perfect synchronization with functionality and aesthetics. IP66 Family of post top lantern designed to complement the geometry of the area. Make : Havells or equivalent. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge. (Note:- the CT of fixture may vary during in execution time and including in same price.)
4
29216
116864.2
... More
SITC of 100 watt LED Flood Light new generation energy saving & environmental friendly, long life, pressure die - cast aluminium housing Flood Light with PC diffused lens enclosure over LED for glare free light. Make : Havells, Bajaj, Surya or equivalent. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge. (Note:- the CT of fixture may vary during in execution time and including in same price.)
18
5752
103538.34
... More
SITC of 100 watt LED street Light New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Make : Havells, Bajaj, Crompton or equivalent. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
22
8979
197551.75
... More
SITC of telephone exchange Accord ADX-400 EPABX system with CPU or equivalent, basic cabinet and exp. with 8 PNT Line and 96 Extn. Including KTS and MDF Cover. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
1
237290
237290.33
... More
SITC of telephone set (C11) compatible with the telephone exchange and make will approved by engineer in charge during execution of time. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
15
1173
17600
... More
Providing the following servicing: a) Cleaning of 11 KV pocket/closed substation b) repairing of damaged civil work c) testing and reapiring of Vaccume Circuit Breaker d) Servicing of transformer in all respect including the Oil top up e) replacement of all MCCB from the Main LT pannel f) cleaning of all cable end terminations g) replacement of main shutter of the pocket substation inluding paint Size approx 4 meter X 4 meter and make as existing h) fresh paint finish including all necessary application of the sub station room size approx 14 foot x 14 foot i) replace all the light fixtures and ventilation fixture. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
1
280000
280000
... More
Supply, Installation, Testing and Commissioning Stabilizer 4KVA 220 V With Timer
5
5500
27500
... More
Supply, Installation, Testing and Commissioning of control cum transmission wiring of 4 core x 2.5 sq mm copper wire in suitable PVC conduits between indoor & outdoor units to central remote controllers & for connections between indoor unit to remote control
100
250
25000
... More
Supply, Installation, Testing and commissioning Drain Pipe -25mm Dia
101
190
19190
... More
Supply, Installation, Testing and Commissioning of Split unit 1.5 TR 3 Star Inverter Hot & Cold Make:- Daikin, Hitachi, Mitsubishi or equivalent Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
1
49500
49500
... More
Supply, Installation, Testing and Commissioning of Split unit 1.8/2.0 TR 3 Star Inverter Hot & Cold Make:- Daikin, Hitachi, Mitsubishi or equivalent. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
4
62000
248000
... More
Supply, Installation, Testing and Commissioning Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported. Item to include all material and lobour complete as per Specification and entire satisfaction of Engineer In Charge.
-
-
-
... More
15.9 mm O.D. (insulation : 13 mm)
30
680
20400
... More
12.7 mm O.D. (insulation :13 mm)
30
550
16500
... More
9.5 mm O.D. (insulation : 13 mm)
30
410
12300
... More
6.4 mm O.D. (insulation : 13 mm)
30
340
10200
... More
Supply and erection of PVC insulated PVC sheathed following number of pair unarmoured copper conductor telephone wire (ISI marked) confirm to IS:7098 (PART-I), 1988 loose in the existing trench or pipe with suitable size of copper thimbles/ lugs complete in all respect as desired by the Engineer-in-charge:-
-
-
-
... More
2 pair telephone wire
270
13
3510
... More
4 pair telephone wire
360
28
10080
... More
5 pair telephone wire
270
37
9990
... More
10 pair telephone wire
360
75
27000
... More
SITC of Acrylic board size 16'x5' with Iron structure complete in all respect as desired by the Engineer-in-charge
1
99120
99120
... More
Total
-
-
10129579.16
... More
Note: Being a percentage tender, the bidder shall quote its price as at par or percentage above or percentage below the estimated total cost in the Bill of Quantities as specified.
-
-
-
... More
GRAND TOTAL
-
-
10129579.16
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%