Punjab Engineering College Tender

Supply and Fixing of Seated Pedal Trainer – LEG SHAPER complete in all respects having following specifications. All pipes used in the equipments should be galvanized with 3mm thickness. Multi Color Powder coating with polyester paints should be used on all the equipments. The foot pedal on all the equipments should be of aluminum only. The seats should be made of high quality plastic with color scheme in yellow or orange. The high end bearings such as SKF/NBC must be used in all the equipments. 1 Dimensions- 1730*450*1450mm 2 Color- customizable multi color and complete powder coat 3 Size of main tube-114*3.75mm steel pipe 4 Size of supporting tube-76*3mm steel pipe 5 There is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 All alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 Anti-skid components are used at the pedal parts. 8 The distance between two spinners is not less than 230mm, avoiding the damage of being stuck 9 Anti theft cover is made by stainless steel/high quality plastic. 10 Thickness of bearing bracket is not less than8mm 11 Hazardous materials like coating agent, rubber are under national newest standard. Functions: Develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. Approaches: Sit on the chair and step on the footboard. Stretching legs with force and recover slowly. Repeat. Users: Suitable for people of different ages.

Supply and Fixing of Wab Board. WAB BOARD complete in all respects having following specifications. All pipes used in the equipments should be galvanized with 3mm thickness. Multi Color Powder coating with polyester paints should be used on all the equipments. Wab Board or Abbs Shaper Size:-972x980x462 mm Two Wab Boards are raised on the pendulum pillar for exercising and agility of the abdomen and muscles. Functions: Developing the strength and flexibility of lumbar and abdominal muscles consuming the fat in waist and abdomen, good for figure shaping and bodybuilding. Approaches: Hang up the round pipe with feet, crossing the hands behind head, making body backward to the trainer, recovers

SUPPLY & FIXING OF PARALLEL BARS FUNCTIONS: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions. Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions. Users: Suitable for middle-aged people and youths. Size:- 1970x542x1600 mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint

Supply and fixing of Taiji Wheel. TAIJI WHEEL complete in all respects having following specifications. All pipes used in the equipments should be galvanized with 3mm thickness. Multi Color Powder coating with polyester paints should be used on all the equipments. The foot pedal on all the equipments should be of aluminum only. The seats should be made of high quality plastic with color scheme in yellow or orange. The high end bearings such as SKF/NBC must be used in all the equipments. 1 Dimensions- 1300*1050*1450mm 2 Color- customizable multi color and complete powder coat 3 Size of main tube-114*3.75mm steel tube 4 Size of supporting tube-30*3mm steel tube 5 Radius of edge is not less than 3.0 mm. 6 Al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 There are damping materials inside the rotating parts. 8 The distance between two spinners is not less than 230mm, avoiding the damage of being stuck 9 Anti theft cover is made by hard plastic Functions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions. Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to your physical conditions. Users: Suitable for middle-aged people and youths.

Supply and Fixing of Riding Trainer . RIDING TRAINER complete in all respects having following specifications. All pipes used in the equipments should be galvanised with 3mm thickness. Multi Colour Powder coating with polyster paints should be used on all the equipments. The foot pedal on all the equipments should be of aluminium only. The seats should be made of high quality plastic with colour scheme in yellow or orange. The high end bearings such as SKF/NBC must be used in all the equipments. 1 Circular mounted base pipe which has diameter 233mm and thickness is 8mm. There are 4 holes on this part at 90 degrees which PCD is 170mm. hole diameter is 20mm 2 On this circular mounted base plate on the centre pillar is welded. Diameter of the centre pipe pillar is 114mm and height is 500mm 3 A support pipe which is welded from the distance of base plate is 441mm and on this side of support pipe welded with the centre pillar and second one side is welded on the seat pipe rest Band 4 Rest band is welded on the center pillar at the distance 265mm from the base plate vertically. This rest band has three parts- first short length 180mm, Second radius 150mm and the last is the long straight length270mm. 5 A seat base pipe has 2 parts, first short length272mm, straight length, second long straight length 255m. A bush is welded on the short length and a screw (steel) is in between the brackets as they give up-down motion. Brackets are welded 105mm from the edge of the short length of the seat base pipe. Those brackets are 50mm apart from each other. 6 On the centre pillar, two rectangular pipes are welded angularly at an angle 53mm from the centre pillar. The rectangular pipes are of the dimensions- length 373mm, breadth 50mm and height 29mm having 360mm vertically upwards from the mounting plate. 7 A round shape pipe is welded on the top of the edges of the rectangular pipe and which length is 125mm and diameter 32 on both sides. 8 A handle beam whose length 930mm,dia meter 60mm.bracket 1st is welded 140mm from the bottom edge of the handle and bracket 2nd is welded 280mm from the bottom edge of the handle beam. The round pipe is connected with the bracket 2nd with the help other steel screws. Functions: The Body Shaper gives a full-body cardiovascular and toning work-out, pushing with the legs while pulling with the arms against resistance. Works arms shoulders, back legs, abdomen and legs with low impact exercise. Approaches: Sit on the seat, hold the handles with both hands and put both feet on the pedals. Push with legs and pull on the handles. When exercising, keep your body upright.

Provision for fixing of gym equipments in cement concrete 1:2:4