Public Works Department Tender

STAFF MODULAR WORKSTATION - Made of 25 mm thick Prelaminated particle board with machine pressed PVC edge band on all sides size 1200x600x1200mm TILE BASED PARTITION SYSTEM - The Main partition 60mm thick and 1200mm ht. With top Tile in Pinup Board and Laminate marker Board/ Fabric of approved shade and color per workstation , lower Tile in Metal finish on both sides. All metal component is in Powder Coated finish with the thickness of 50-60 μ DFT. All vertical component are made up of aluminium extrusions.Partition system have adequate raceway at Single and double level for running data & power cables. Raceway Above Table Top and at Skirting Considered (MAIN SPINE ONLY) •The Return partition 60mm thick and 1200mm ht. With top Panel in Pinup + Fabric of approved shade and color per workstation , lower panel in laminated finish on both sides. All trims in Powder Coated finish with the thickness of 50-60 μ DFT. GABLE END - to be made of 25mm thick Prelaminated Partical Board With PVC Edge band. PVC GROMMET KEY BOARD TRAY Lineo Key Board Tray with Mouse Tray. Powder Coated.

STAFF MODULAR WORKSTATION MID BACK CHAIR BACKREST: The Back is made up of 12mm thick (7 layers) hot pressed plywood and moulded foam thickness 40 mm upholstered with fabric. Back Size - 480 mm (W) X 670 mm (H)SEAT: The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. Seat Size 495 mm (W) X 500 mm (D). SEAT AND BACK FOAM: Foam made out of moulded Polyurethane foam with the following properties: Density (IS-7888-1976) : 50-55 Kg/m3. Hardness: 28+/-3 Kgf. Compression set (IS-7888-1976): 10% Max. Tensile strength (IS-7888-1976): 0.9-1.2 Kg/cm2 Tear strength(Min) (IS-8067) : 0.6 Kg/cm(min) Resilience (IS-7888-1976): 40% - 60% Elongation (IS-7888-1976): 110 % ARM REST: ADJUSTABLE ARM: The arm rest made up of injection moulded from black polyurethane. Arm pad size 250mm (L) x 95mm (W). The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 5mm thick.3D arm rest with height adjustable upto 65mm; front and back with adjustable up to 60mm, and Left and Right turn upto 36 ˚. MECHANISM: SINGLE POINT SYNCHRO MECHANISM: Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm. Also it has the back tension adjustment knob. BASE: NYLON BASE : The base made up of injection moulded in black Nylon-6 (GF black 30%) and fitted with 5 Nos twin wheel castors. The base is 658mm pitch circle diameter. CASTERS: NYLON CASTORS: The twin wheel castors are injection moulded in Nylon-6 and diameter of Castor 60 mm. SEAT AND BACK FABRIC PROPERTIES: Content:100% Polyester Weight: 170 GSM Abrasion Resistance: Over 30000 cycle. Bursting Strength: 19.1 kg/cm². Tear Strength (NF): Wrap - 30.58 ; Weft - 29.97. Breaking Strength (NF): Wrap - 375; Weft - 479. Elongation %: Wrap – 36.60 ; Weft – 75.90. Colour Fastness to Light: Adheres to Grade 5 [BS 1006 : 1990] Colour Fastness to Rubbing;Adheres to Dry: Grade 5 [ISO 105*12] Adheres to Wet: Grade 3-4 [ISO 105*12] The Chair Must be ANSI BIFMA X5.1- 2017 and respected certificate must be uploaded

COMPACTORS FOR STORAGE Area - 2700 x 915 x 2100 OPTIMIZER - 1980(H) X 381/457(D) X 910(W) - 1 BAY Single Static- (1 nos.) OPTIMIZER - 1980(H) X 381/457(D) X 910(W) - 1 BAY Twin Movable- (1 nos.) OPTIMIZER - 1980(H) X 381/457(D) X 910(W) - 1 BAY Single Last- (1nos) BASE FRAME: Fabricated in channel Type from minimum 2 mm thick MS Sheet Size of Channel 65x45x45x2.0 mm Thick. GUIDE RAILS: Two Track guide rails are made out of 30mm Bright bar placed on 2 mm thick J section which will be above the floor and are as per the international standard of safety. The rail with J section on which the trolley moves is Zinc plated with minimum 600 GSM /80 Micron Zinc coating as per IS 4759. SUPER STRUCTURE: Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. SHELVES: Shelves made of 0.8mm thick Prime Quality C.R.C.A. having 8 folds each will be provided each designed to carry a U.D.L. of 70 Kgs. VERTICAL PANEL: Vertical panel consists of the front; Centre & rear panel shall be made out of 0.8 mm thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL: Made out of 0.8 mm thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION: The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 0.8 mm thick Sheet. LOCKING: System will be provided with individual rack locking as well as centralized locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM: Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000mm x 200mm x 60mm. DRIVING WHEEL: PU drive wheel / 3 Arm chrome plated spoke type for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENT: Acrylic card holders provided on the front panel for easy identification & retrieval. FINAL FINISH: Powder Coating (8 tanks process with 50 microns) DOOR: Overall Dimensions of Hinge Door Pair shall be 5490mm(W)x428mm(D)x2180mm(H) . Construction shall be knock down made out of 0.8 mm CRCA steel conforming to IS : 513. Finish shall be bodies including shelves are given antitrust surface treatment & are powder coated with epoxy polyester powder with dry film thickness of 40 microns .(To be installed as per requirement at site)

Add GST @ 18% on item no. 1 to 6