Municipal Corporation Tender

Audio DSP( Digital Signal processor -feed back Suppressor:-Supply, Installation, Testing & Commissioning of 12 x 8 Networked Digital Signal Processor With AEC; Should have 12 or more floating AEC in group of 4 or more Channels; DSP with 12 inputs and 8 outputs or more; 12 Control Inputs and 6 Logic Outputs for GPIO Integration; THD: 0.01% 20Hz to 20KHz; Crosstalk: -75dB orbetter; Open architecture software configurable; Separate logic processing power; 2 digital audio bus RJ45 Port; 1 Ethernet port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Audio DSP shall include processor control, filter, mixing, diagnosis etc; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED . There is a comprehensive onsite warranty of two years. Make as per prefered Make BSS, Bose, Extron, Bi-Amp, Martin Audio, symetrix . Make should be approved from the Engineer in charge. The work to be completed as per the DNIT condition and as per the entire satisfaction of Enginner in Charge.

Stagebox for Digital Stagebox:- Supply, Installation, Testing & Commissioning of Rack Mountable Digital Stagebox; should have capability to route audio inputs & outputs over an ethernet (CAT5) cable; should have 16 - 20 analogue XLR inputs and 8 - 12 XLR outputs; should have MADI/Dante port(s) for digital audio routing to main mixing console; should be supplied by same OEM of digital Mixing console to avoid any compatibility issues and enhance the overall system performance; etc.There is a comprehensive onsite warranty of two years . Make should be approved from the Engineer in charge. The work to be completed as per the DNIT condition and as per the entire satisfaction of Enginner in Charge.

CAT 6A Cable:-Supply, Installation, Testing & Commissioning of of high−quality shielded Cat 6A cable suitable for use in environments with high levels of EMI, Constructed with 23AWG coper conductor, tested to 500Mhz frequency range and designed to support 10 gigabyte application to full 100m, extermily high pairbalance providing excellent EMC,maxizing noise immunity and providing high alien cross talk performance to U/UTP cabling system, standard compliance UL Listed CMP -LP (0.6A) or better PoE compliance Meets IEEE 802 3af, IEEE 802 3at and IEEE 802 3bt for POE appliaction. Make as per prefered Make Extron, Beldon, Krammer, R&M, Crestron. Make should be approved from the Engineer in charge. The work to be completed as per the DNIT condition and as per the entire satisfaction of Enginner in Charge.