Municipal Corporation Tender

Providing and applying 2.5mm thick road marking strips(retro-reflective ) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitter with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals oil grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications (DSR 16.62)

Providing and fixing reflective 3M or its equivalents raised pavement marker with moulded shanks made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering (visible at night and in rainy conditions) the lens face and shall support a load of 16000kg tested in accordance to ASTM D 4280 tape H and complying to specification category A of MORTH circular No. RW/NH/33023/10-97-DO III dated 11.06.97. the height, width, length shall not exceed 50x100x100mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35+/-5 degree. The strength of detachment of the integrated cylindrical shanks (Diameter not less than 19+/-2mm and height not less than 30+/- 2mm) from the body is to be a minimum value of 500kg. The rates also includes cleaning of road surface and fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacture’s recommended and complete in all respect to the entire satisfaction of Engineer-in-charge

Providing and fixing 3-M or equivalents dual-directional delinator made out of 16 gauge M.S. rectangular pipe of size 25 x 68mm and of length 600mm. Pipe stove enamelled and baked to 120ᵒC powder coated. Head made outof ABS plastic rectangular moulded with flat face provided with High Intensity Prismatic Reflectors of colour (white/yellow/red) of size 100 x 125mm with additional 2 reflective strips of 25mm wide.Embedded in CC 1:2:4 of block size of 9” x 9” x 6” Complete in all respect to the entire satisfaction of Engineer-in-charge.