Ministry Of Labour And Employment

RA Number: GEM/2019/RA/4470 Dated: 28-01-2019 RA Document RA Details RA Technical End Date/Time 07-02-2019 16:00:00 RA Life Cycle (From Publish Date) 90 (Days) RA Offer Validity (From End Date) 15 (Days) Ministry/State Name Ministry Of Labour And Employment Department Name Na Organisation Name Employees State Insurance Corporation (esic) Office Name Punjab & Chandigarh Total Quantity 125 Item Category LED Luminaire (Recessed Luminaire) MSE Exemption For Years Of Experience And Turnover Yes LED Luminaire (Recessed Luminaire) ( 125 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values STANDARDS Conformity to Indian Standard IS:10322/part 5/sec-2/2012 and IS 16107 (Part 2/Sec 1) : 2012 for Recess type * Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) Yes * DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) Yes * Luminaire Class (as per Cl. 2.1 Section 2 of IS: 10322 (Part-1) Class I * Types of LED Modules as per the IS: Type 3 * 1 / 6 16103(Part-2)/2012 Rating of Recess type LED Luminaire/System Wattage/Rated Power 18W 18W Light Intensity(System Lumens) 80 Lm/Watt for 3000 deg K, 90 Lm/Watt for 4000 deg K, 100 Lm/Watt for 6000 deg K Yes * Color temeprature (+/- 500 K) 6000 deg K * Type of fixture (in feet) 1x1 (for 3W to 16W) 1x1 (for 3W to 16W), 1x2 (3W to 16W), 1x1 (for 18W to 28W), 1x2 (18W to 28W), 1x4 (30W to 48W), 2x2(30W to 48W) CONSTRUCTIONAL Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest (Minimum) IP20 * Mounting type Recess type * Diffuser material Poly carbonate (UV stabilised) * The luminaire body must be corrosion resistant epoxy powder coated / anadozing Yes * All fastners must be of nickel/chrome plated Yes * Number of electronic control gear (power supplies) 1 * Light Source SMD LED Chip as per LM 80/IS16106 * Warranty for free replacement 2 Years * ELECTRICAL EFFICIENCY MANAGEMENT Operating Voltage and frequency range 140V to 280 V at 50 Hz AC * Rated voltage 230 V AC 50 Hz * AC Power Factor ≥ 0.90 * Driver Efficiency ≥85 * Total Harmonics Distortion ( ≤ 20% (for upto 20W) (</=10% Yes * 2 / 6 (for above 20W) The total circuit power shall not be more than 110 percent of the value declared by the manufacturer (as per Cl 8 of IS:16104:2012 lates) Yes * OPTICAL MANAGEMENT LED chip Efficacy (≥130 Lm/Watt for 6000 deg K, >/=120 Lm/Watt for 4000 deg K, >/=110 Lm/Watt for 3000 deg K) Yes Yes, Yes, with higher efficacy >/=140 Lm/Watt Working life for LED : (Minimum 50,000 burning hours as per LM-80 report) Yes * Colour Rendering Index(CRI) ≥80 * Beam Angle ≥120 * Reflector type Diffuser * THERMAL MANAGEMENT Fixture / Luminaire should be die-cast aluminium /CRCA/Extruded aluminium Yes * Capacitor shall be rated for a temperature of 105 deg. celsius or better Yes * Junction temperature / soldering temperature < 85 deg C * Operating temperature range -10 deg. C to +50 deg. C * Humidity Range 10 % to 95% RH * PROTECTION Short circuit Protection Yes * Over load protecton Yes * High voltage test (1.5 KV for one minute between supply terminals and body of the unit) Yes * Insulation resistance between earth and current carrying part >100 M ohm * The luminaire shall be protected against Yes * 3 / 6 surges and transients of >/=2.5 KV MARKING Manufactures Name and brand shall available on the body of the Luminaire Engraved/Embssed * Each LED liminaire shall have the manufacturer’s name, model number, serial number, date of manufacture (month- year), and lot number as identification mark inside each unit and the outside of each packaging box Yes * The operation characteristics such as rated voltage and rated power in watts shall be marked inside each LED luminaire unit Yes * REPORTS AND CERTIFICATIONS LED Make EVERLIGHT / EDISON / BRIDGELUX / NATIONSTAR / S