Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair And Painting To Steel And Wooden Furniture At Nahan Under Ge Chandigarh. in Chandigarh, with an estimated contract value of Rs. 15,00,000. The bid opening date for this tender is 13-11-2026 and the last date for bid submission is 04-12-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - Chandigarh Tender

Opening Date13 Nov 2026
Closing Date4 Dec 2026
Tender Amount₹ 15,00,000 
Notes
Download

Costs

Description

Repair And Painting To Steel And Wooden Furniture At Nahan Under Ge Chandigarh.

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
FD-229: M&L for re-canning to wooden chair Writing with 1STclass plastic cane 2mm wide half round white colour as per "Godrej" pattern including two coats PU polishing complete all as specified and as directed by Engineer-in-charge.

40

76

-

... More
FD-258 & 359: M&L for re-canning of seat & back of chair verandha with 1st class plastic cane 4mm wide half round white colour in matt pattern and applying two coats of synthetic enamel paint white to complete chair before re-canning complete all as specified and as directed by Engineer-in-Charge.

250

78

-

... More
Taking out carefully old existing unserviceable lock of any size without any damage to the Almirah Steel and provided with new lock of any type Gde-1 qualite conforming to IS with duplicate keys, complete all as specified and as directed by Engineer-in Charge.

100

79

-

... More
Taking out carefully old existing unserviceable handle from almirah steel and provided with new handle MS chromium plated,complete all as directed by Engineer-in Charge.

80

81

-

... More
M&L for painting including denting if any applying two coats of synthetic enamel panint to almirah steel large on external surface only complete all as specified and shown on drawing (shade shall be approved by GE)

50

83

-

... More
All as per above item No. 8 here in before but for almirah Steel Glazed.

13

84

-

... More
All as per above item No. 8 here in before but for almirah Steel small

70

76

-

... More
FD-357: M&L for seat cushion of foam 40mm density covered with resin & fixed cup nails for chair dinning complete all as specified and as directed by Engineer-in-Charge.

40

76

-

... More
FD-357: M&L for long back cushion of foam 32mm density covered with resin & fixed cup nails for chair dinning complete all as specified and as directed by Engineer-in-Charge.

35

77

-

... More
M&L for Seat cushion of foam 32mm density covered with resin & fixed cup nails for chair writing with back complete all as specified and as directed by Engineer-in-Charge.

50

78

-

... More
M&L for repair to Front leg of chair easy /chair dining /chair writing by replacing unserviceable part in lieu of provided with new Front leg made of 'Shisham' wood including polishing with French polish to external suface of wood complete all as specified and as directed by Engineer- in - Charge.

90

78

-

... More
All as per item no 14 above but Rear leg

50

79

-

... More
All as per item no 14 above but Front/Side/rear rail

70

81

-

... More
All as per item no 14 above but Arm

55

82

-

... More
FD-231 & 224: M&L for repair to table with drawer of size 900mmx600 x 760mm by replacing unserviceable part in lieu of provided with new Table top 900mmx600x760 mm made out of 19mm thick HDHMR board & 4mm thick teak wood beading top with nails Complete all as specified and as directed by Engineer-in-Charge.

35

83

-

... More
All as per above item No 18 here-in-before but table center(900mmx450mm)

20

84

-

... More
All as per above item No 18 here-in-before but teapoy verandah (900x450mm)

20

76

-

... More
All as per above item No 18 here-in-before but teapoy wooden (600x450mm)

35

84

-

... More
All as per above item No 18 here-in-before but table peg (450mmx450mm)

45

78

-

... More
All as per above item No 18 here-in-before but table writing med 1200mmx600mm)

15

81

-

... More
All as per above item No 18 here-in-before but table cook steel top (300x900mm)

8

81

-

... More
All as per above item No 18 here-in-before but table 6 persns

16

83

-

... More
FD-220: Removing to unserviceable long rail having both threaded broken end and provided with new long rail of 32mm dia GI pipe medium grade ISI marked duly threaded both ends complete all as specified and as shown on drawing.

80

84

-

... More
FD-220: Removing to unserviceable short rail having both threaded ends broken in lieu of provided with new short rails made out of 32mm dia GI pipe medium of broken long rail obtained from srl item No. 26 here-in-before, threading both ends of short rail and fixed in position complete all as specified and as directed by Engineer-in-charge.

90

76

-

... More
FD-220: Removing to unserviceable legs and provided with new leg made out of short rail obtained from srl item No. 27 above threading and fixed in a position complete all as specified and as directed by Engineer-in-charge.

250

76

-

... More
Removing to unserviceable 3 way elbow, 32mm bore in lieu of provided with new 3 way elbow , 32mm bore duly ISI marked fixed in position including cutting and welding complete all as specified and as directed by Engineer-in-charge.

90

76

-

... More
Removing to unserviceable check nut and provided with new check nut of 32mm bore and 6mm thick and fixed in a position complete all as specified and as directed by Engineer-in-Charge.

120

77

-

... More
Removing of unserviceable wooden block from lower ends of leg and provided with new MS plate of 50mm dia x 3mm thick welded to lower end of leg complete all as specified and as directed by Engineer-in-charge.

60

77

-

... More
FD-84: M&L for repair to table clerk steel (1200mmx600mm) with drawer by replacing of unserviceable Table top with new Table top made out of 19mm thick HDHMR board & 4mm thick teak wood beading around top fixed with nails Complete all as specified and as directed by Engineer-in-Charge.

8

81

-

... More
Replacement of drawer lock of table clerk steel Lock with 2Nos Keys.

5

82

-

... More
M&L for painting of two coats with synthetic enamel paint to steel surfaces of clerk table steel complete all as specified and directed.

5

83

-

... More
M&L for repair to table officer steel (1350x770mm)with drawer by replacing of unserviceable Table top with new Table top made out of 19mm thick pre-laminated particle board & 4mm thick teak wood beading around top fixed with nails Complete all as specified and as directed by Engineer-in-Charge.

4

84

-

... More
Replacement of drawer lock of table officer steel Lock with 2Nos Keys.

4

76

-

... More
M&L for painting of two coats with synthetic enamel paint to steel surfaces of officer table steel complete all as specified and directed.

4

76

-

... More
FD-1009: M&L for replacement of top of table dinning OR's size 900x900x750mm made out of 19 mm thick HDHMR board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly painted with synthetic enamel colour complete all as specified and directed by Engineer-in-Charge.

75

76

-

... More
FD-239: M&L for replacement of top of table Dinning officer (1500mmx900mm) 6 persons made out of 19mm thick HDHMR board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge.

12

77

-

... More
FD-239: M&L for replacement of top of table dinning officer (1800mmx900mm) 8 persons made out of 19mm thick HDHMR board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge.

8

78

-

... More
FD-281: Replacement to unserviceable foam cushion and provided with new foam cushion of size 530mmx560mmx100mm thick of 32 density covered with tapestory cloth & cloth stitched with best quality thread complete all as specified and directed by Engineer-in-Charge Make of foam cushion :-- Sleep well / Kurlon/ Feather foam. Note :-- Tapestory cloth shall be of minimum rate Rs 350/- per metre

240

78

-

... More
FD-245 246 & 247: M&L for repair to bed ply wood by replacing unserviceable Head Rest covered with 3.5mm thick ply wood one side teak face other side commercial face Complete all as specified and as directed by Engineer-in-Charge.

45

78

-

... More
All as per item No 42 above but Foot rest covered with 3.5mm thick ply wood one side teak face other side commercial face.

45

78

-

... More
All as per item No 42 above but long rail made out of sheasham wood

35

78

-

... More
All as per item NO 42 above but ply wood top made out of 12mm thick ply wood

30

78

-

... More
All as per item No 42 above but ply wood top 7x3 made out of 12mm thick ply wood

25

78

-

... More
All as per item No 42 above but ply wood top 7x4 made out of 12mm thick ply wood

15

78

-

... More
FD-220: S&F as in repairs 12mm thick(1980mmx900mm size) both side commercial plywood top(ISI marked) BWR grade with & including MS Flat iron 32mmx5mm x 900mm long for 04 Nos in each charpoy having one Nos hole near each end of fixing the plywood top with purpose made round head mild steel nuts & bolts/washer welded and applying two coats of synthetic enamel paints in black colours over a coat of red oxided primer complete all as specified and directed by Engr-in-Charge. Note:- The rate quoted agianst the item shall deem to be included for necessary welding & painting works etc. complete all as specified and as directed by Engineer-in-Charge.

200

76

-

... More
FD-1029: M&L for repair for lockers 100x600x760 mm PB sheet 1.00 mm thick shall be used through out steel hinges 65mm shall be using fixed with shutter and and CP handle 100mm long and CP hasp and staple 75x40x3mm shall be fixed with shutters 20mm dia CP conduit pipe 1.6mm thick with socket shall be provided, including cutting and welding rest all as per drawing including spray painting internally and externarly with two coats of synthetic enamel paint over a coat of red oxide zinc peimer complete all as specified and directed by Engr-in-Charge.

100

77

-

... More
Preparation of old treated wood and wood based surfaces of any description over 10 cm in width or Sqm grith and applying two coats of PU polishing (finishing coat with PU) complete all as specified and as directed

250

78

-

... More
Removing of unservicable old defaced mirrors unservicable back plywood of mirror frame of table dressing ladies and S&F sheet glass electro copper plated mirror 5mm thick and plywood commerical BWR grade 6mm thick for back side mirror frame and fixing to table all as specified and as directed by Engineer-in-charge.

10

79

-

... More
All as per item No 51 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

80

81

-

... More
Removing of unservicable top from the table dressing ladies and S&F new top made out of prelaminated particle board 18 mm thick with 3mm thick beading all as specified and as directed by Engineer-in-charge.

8

86

-

... More
All as per item No 53 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

40

83

-

... More
Removing of unservicable broken plywood from drawer bottom of table dressing ladies and S&F plywood commercial BWR grade 6mm thick all specified and as directed Engineer-in-charge.

8

77

-

... More
All as per item No 55 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

40

78

-

... More
Removing of unservicable sides and front side of drawer of table dressing ladies and S&F new 18mm thick prelaminated particle particle board of both sides & on drawer front side beading 3mm thick all specified and as directed Engineer-in-charge.

8

79

-

... More
FD-281/373: All as per item No 57 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

40

81

-

... More
FD-281/373: Removing of unserviceable broken plwood from back side board and S&F teek plywood commercial 6mm thick BWR grade in single piece all as per specified and as directed.

10

82

-

... More
FD-241: Removing of unserviceable Top from side board and S&F new top of 18mm thick particle board (exterior grade) one side teak face and other side white with 3mm thick beading all as specified and as directed

10

81

-

... More
FD-241: Removing of unserviceable sides from side board and S&F new side of 18mm thick particle board (exterior grade) one side teak face and other side white with 3mm thick beading all as per specified and as directed

10

82

-

... More
FD-241: Removing of broken/unserviceable door shutter of side board and S&F new door shutter made out 18mm thick prelaminated particle board one side teak face other side white exterior grade with 3mm thick beading all as specified & as directed.

8

75

-

... More
FD-241: Removing of unserviceable broken plywood from drawer bottom of side board and S&F plywood commercial 6mm thick 5 ply BWR grade all per specified and directed

10

76

-

... More
FD-241: Removing of leg & frame removing of unserviceable particle board from bottom or side board and S&F 18mm thick or particle board one side teak veneer face and other side white with 3mm thick beading and fixing the leg frame to side board all as directed and as directed

8

76

-

... More
FD-241: Removing of unserviceable particle bord from drawer front side bord and S&F 18 mm thick of new particle board & one side teak veneer face and other side white with 3mm thick beading all as specified and as directed

8

76

-

... More
FD-241: Removing of unserviceable worn out existing shelf from the side board and S&F new shelf all as per size and as shown in drawing made out of 18mm thick prelminated particle board exterior grade all as directed by Engr in charge

20

76

-

... More
FD-281/373: Removing the unserviceable front legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed (5 seater/single seater)

45

76

-

... More
FD-281/373: Removing the unserviceable rear legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed.

30

76

-

... More
FD-281/373: Removing the unserviceable arms of sofa set and S&F new teak wood arms made to shape all as per drawing and as directed .

28

76

-

... More
FD-281/373: Removing the unserviceable stiffeners of sofa set and S&F new teak wood stiffeners made to shape all as per drawing and as directed.

27

76

-

... More
FD-1113: Removing the unserviceable front & back rail of sofa set (3 seater/single seater) and S&F new rail of teak wood made to shape all as per drawing and as directed

25

76

-

... More
FD-1113: Removing of unserviceable side rail of Sofa set (3 seater/single seater) and S&F new Teak wood rail all as shown in drawing & as directed by Engr in charge

25

81

-

... More
FD-281/373: Removing the Unserviceable front legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed (4 x single seater)

24

86

-

... More
FD-281/373: Removing the Unserviceable rear legs of sofa set and S&F new teak wood legs made to shape all per drawing and as directed.

24

83

-

... More
FD-281/373: Removing the unserviceable arms of sofa set and S&F new teak wood arms made to shape all as per drawing and as directed

24

84

-

... More
FD-281/373: Removing the unserviceable stiffeners of sofa set and S&F new teak wood stiffeners made to shape all as per drawing and as directed

24

76

-

... More
FD-281/373: Removing the unserviceable front and back rail of sofa set (4x single seater ) and S&F new rail of teak wood made to shape all as per drawing and directed.

22

76

-

... More
FD-281/373: Removing of unserviceable side rail of Sofa set (4x single seater) and S&F new Teak wood rail all as shown in drawing & as directed by engr in charge

22

77

-

... More
FD/E6/MAP/10: Removing the unserviceable front legs of chair dining long back and S&F new teak wood legs made to shape all as per drawing and as directed

50

78

-

... More
FD/E6/MAP/10: Removing the unserviceable rear legs of chair dining long back and S&F new teak wood legs made to shape all per drawing and as directed.

50

79

-

... More
FD/E6/MAP/10: Removing the unservicable side rails of chair dining long back and S&F new teak wood rails made to shape all as per drawing and as directed

25

81

-

... More
FD/E6/MAP/10: Removing the unservicable front rails of chair dining long back and S&F new teak wood rails made to shape all as per drawing and as directed

25

82

-

... More
FD/E6/MAP/10: Removing the unserviceable bottom stiffeners of chair dining long back and S&F new teak wood stiffeners made to shape all as per drawing and as directed

35

83

-

... More
FD/E6/MAP/10: Removing the unserviceable & worn out seat cushion with tapestry cloth from chair dining long back cushion and S&F new foam cushion 75mm thickof 40 density cushion of size as per drawing.

30

84

-

... More
TP: Table Peg Special: Removing the Unserviceable peg table glass of size 2x2 feet and S&F new glass with thickness of 8mm as per drawing and as directed engr in charge

13

76

-

... More
FD-375: Table center Special: Removing the Unserviceable table center glass of size 3''x 2'' feet and S&F new glass with thickness of 10mm as per drawing and as directed engr in charge

10

84

-

... More
CHAIR VISITOR/CHAIR CBA CUSHIONED/ CHAIR WRITING MAP (FD/E6/MAP/12): Taking out old unserviceable seat and S&F New seat as per shown in drawing and directed by Engr-in-charge

40

76

-

... More
Taking out old unserviceable back and S&F new back as per shown in drawing and directed by Engr-in-charge

40

77

-

... More
All as per item no 88 above but chair writing MAP as per shown in drawing and directed by Engr-in-charge

58

79

-

... More
Taking out old unserviceable Arms and S&F new Arms as per shown in drawing and directed by Engr-in-charge

62

78

-

... More
All as per item no 90 above above but chair writing MAP as per shown in drawing and directed by Engr-in-charge

58

81

-

... More
CHARPOY IP FOLDING PLY TOP (FD/E6/MAP-11/01): Removing the existing unserviceable plywood from charpoy, S&F new 8/9mm thick plywood commercial with screws and cup washer all as specified and directed.

12

81

-

... More
Removing unserviceable hard rubber shoes of charpoy folding, S&F new hard rubber shoes all as specified and directed

80

82

-

... More
CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05): Removing the existing unserviceable PVC seat from chair and S&F new PVC seat with complete fitting all as per shown in drawing and directed by engr in charge

50

84

-

... More
Removing the existing unserviceable hand board with bracket from chair and S&F new 18mm thick particle hand board white on one side and other side teak face with bracket made to shape with 4mm thick beading all round all as specified and directed.

50

76

-

... More
Removing unserviceable hard rubber shoes of chair school and S&F new hard rubber shoes all as specified and directed

200

76

-

... More
TABLE BEDSIDE (MAP) (FD/E6/MAP/15 (R): Removing the existing unserviceable prelaminated particle board from top of bedside and S&F from new 18mm thick prelaminated particle board exterior grade ISI marked one side teak faced all as specified and directed

40

76

-

... More
All as per item no 97 above but from bottom side of table bedside ISI Marked

40

77

-

... More
All as per item no 97 above but but from sides of table bedside ISI Marked

70

81

-

... More
Removing the existing unserviceable plywood from back side of bedside, S&F new 6mm thick plywood commercial all as specified and directed

35

82

-

... More
Removing the existing unserviceable upper drawer made out of prelaminated particle board from bedside and S&F new drawer made out of 18mm thick prelaminated particle board one side teak faced with drawer bottom of 6mm thick plywood all as specified and directed

30

83

-

... More
All as per item no 101 above but above but lower drawer

30

76

-

... More
BED PLYWOOD TOP (MAP) (FD/E6/MAP/00 (R):Removing the existing unserviceable prelaminated particle board from head rest of bed and S&F from new 18mm thick prelaminated particle board both side teak faced exterior grade ISI marked all as specified and directed by Engr-in-charge

30

76

-

... More
All as per item no 103 above but foot rest

30

76

-

... More
Removing the existing unserviceable MS square pipe stiffeners from bed and S&F new 25mm square pipe 1.6mm thick all as specified and directed

20

77

-

... More
Removing the existing unserviceable ply top from bed and S&F new 12mm thick ply with suitable screws all as specified and directed

20

78

-

... More
Removing the existing unserviceable hard rubber shoes from bed and S&F new hard rubber shoes to the legs of bed all as specified and directed

120

78

-

... More
Table computer (FD/E6/MAP/03):Taking out old unserviceable top of table computer and S&F new top of 18mm thick prelaminated particle board exterior grade and providing with 4 mm thick teak wood beading all round the top complete all as shown in drawing and directed by Engr-in-Charge .

4

78

-

... More
Refiting the complete structure with pvc clamp piono type hinges, rubber shoe ,screws and washer to make it functional after tightening the loose parts all as shown in drawing.

4

76

-

... More
S&F new sliding channel of key board all shape and size as shown in drawing.

8

76

-

... More
Chair Easy Steel with back : Seat cushion and back of foam 40 mm density covered with resin & fixed cup nails for chaireasy steel with back and applying two coat of synthetic enamel paint to complete chair all as specified and as directed by Engineer-in-Charge.

10

76

-

... More
Replacement to unserviceable foam cushion and provided with new foam cushion of size 530mmx560mmx100mm thick of 40 density covered with tapestory cloth & cloth stitched with best quality thread complete all as specified and directed by Engineer-in-Charge Note:- Tapestory cloth shall be of minimum rate 350/-per metre

42

79

-

... More
Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch 'A' section II (i.e Rs 13,645.00 shall be deducted from the total amount arrived.

-

-

13645

... More
Total of Schedule 'A' Rs.

-

-

-



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.