Institute Of Microbial Technology Tender
View complete overview of Chandigarh IMT Tender
Institute Of Microbial Technology - IMT Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jul 2024
Closing Date13 Aug 2024
Tender Amount₹ 1,72,45,595
Costs
EMD
₹ 3,45,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CSIR_202462_1Bid Award Id
ViewTender No
CSIR/IMTECH/CSPS/24-25Tender Authority
Institute Of Microbial Technology ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.- Cement mortar 1:4 (1 cement :4 coarse sand)
10
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
10
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias, riser ,treads ,skirting and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour black, Cherry/Ruby Red and shade. Area of slab over 0.50 sqm
10
-
-
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
30
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
910
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood
5
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm thick shutters Kiln seasoned and chemically treated Hollock wood.
20
-
-
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
20
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
50
-
-
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
85
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
120
-
-
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
135
-
-
Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : 35mm thick shutters With ISI marked stainless steel butt hinges of required size. Kiln seasoned and chemically treated Hollock wood.
165
-
-
Providing and fixing 30mm thick wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : 30mm thick shutters With ISI marked stainless steel butt hinges of required size. Kiln seasoned and chemically treated Hollock wood.
20
-
-
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets (wall to wall brackets & end finials of approved design) fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20mm dia
350
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
150
-
-
Providing and fixing bright finished brass upto 200mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
20
-
-
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.- 75mm
84
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
86
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
200
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
294
-
-
150x10 mm
335
-
-
100x10 mm
40
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, Twin rubber stopper
294
-
-
Providing and fixing magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
290
-
-
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately).
200
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125mm
1060
-
-
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin-charge.(Payment of providing and fixing auto closing hinges shall be paid separately).
135
-
-
Providing & fixing 19mm thick both sides balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirahs, cupboard & drawer etc.including necessary nail, screw etc. complete as per the direction of Engineer-in-charge.
420
-
-
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200mm to 300 mm
36
-
-
Providing and fixing stainless steel soft closing concealed spring hinges (Hettich, Hafele, Blum make) at 0 degree to 8 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
600
-
-
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.
36
-
-
Providing and laying rectified ceramic glazed floor tiles (Anti skid) 300mmx300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.
210
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.The tiles must be cut with zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness levelling system & rubber mallet for placing the tiles gently & easily. Double charge vitrified floor tiles polished finish of size. Size of Tile 600x600 mm
800
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.The tiles must be cut with zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness levelling system & rubber mallet for placing the tiles gently & easily. Double charge vitrified floor tiles polished finish of size. Size of Tile 600x1200 mm
750
-
-
Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.
1550
-
-
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477,in average 3mm thickness.
1550
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile upto 600x 1200 mm
130
-
-
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm
870
-
-
Size of Tile upto 600 x 1200 mm
810
-
-
Providing and laying flamed finish Granite stone flooring in required design including skirting ,treads & riser of stair case and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
200
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
10
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
600
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
300
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required,to achieve even shade and colour. Two coats
6500
-
-
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
2650
-
-
Applying priming coats with primer of approved brand and manufacture having low VOC content : With water thinnable cement primer on wall surface.
2650
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work
120
-
-
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.
160
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand)
25
-
-
Renewing glass panes, with wooden fillets wherever necessary: (Make- Saint Gobain/ Modigaurd) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
170
-
-
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
18
-
-
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
1550
-
-
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
165
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design
15
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
25
-
-
Demolishing R.C.C work manually/by mechanical means including stacking of steel bars & disposal unserviceable material within 50 metres lead as per the direction of Engineer-in-charge.
2
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
70
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
75
-
-
Dismantling tile work in floors, walls and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
650
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
800
-
-
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter
300
-
-
Dismantling of flushing cistern/ wash basin/ EWC/Orissa Pan/Sink of any size & of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
90
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
950
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
100
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
42
-
-
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
42
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
24
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
42
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
42
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
42
-
-
Providing and fixing of C.P. brass Toilet Paper Holder. C.P. brass
42
-
-
Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729: 75 mm diameter
150
-
-
Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729 : 100 mm diameter
150
-
-
Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS -1729 75mm dia
45
-
-
Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS -1729 100mm dia
20
-
-
Providing and fixing hee rest sanitary bend bend: Sand cast iron S&S as per IS -1729 75mm dia
20
-
-
Providing and fixing hee rest sanitary bend bend: Sand cast iron S&S as per IS -1729 100mm dia
20
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS -1729 100x100x100mm
50
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS -1729 75x75x75mm
50
-
-
Providing and fixing collar : Sand cast iron S&S as per IS - 1729 100 mm
50
-
-
Providing and fixing collar : Sand cast iron S&S as per IS - 1729 75 mm
50
-
-
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 75mm
60
-
-
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100mm
60
-
-
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100mm
60
-
-
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 75mm
60
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand Cast Iron S&S as per IS- 1729 100 mm inlet and 100 mm outlet
6
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : Sand Cast Iron S&S as per IS- 1729 100 mm inlet and 75 mm outlet
36
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings such as MT, FT etc, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes
600
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings such as MT, FT etc, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
150
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore
250
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 32 mm dia nominal bore
200
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25mm to 40mm nominal bore
48
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm
48
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32mm
24
-
-
Providing and fixing ball valve (brass) of approved quality ( Viking make or equalent ) , High or low pressure, with plastic floats complete : 20 mm nominal bore
18
-
-
Providing and fixing uplasticised PVC connection pipe (Viking make) with brass unions : 45 cm length
150
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 20 mm dia nominal bore
250
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 32 mm dia nominal bore
200
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20 mm nominal bore:
30
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 32 mm nominal bore:
25
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
18000
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm Nominal bore
50
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
165
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge
200
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)
160
-
-
Providing & fixing C.P. brass grating (Viking, Jaquar make) of required size (100mm to 125mm dia) and shape of approved quality, cutting & making good the floor wherever required complete as per the direction of Engineer-in-Charge.
84
-
-
Providing and laying in position cement concrete flooring of specified grade excluding the cost of centering and shuttering - All work up to floor V level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
15
-
-
Providing and fixing CP Brass wall mixer (JAQUAR -FLR-5273UPR) with provision for overhead shower 180mm round shape single flow ( Jaquar-OHS-1759) including shower arm (Jaquar-SHA-479L450) with 115mm long bend pipe on upper side , connecting legs & wall flanges etc complete as per the direction of EIC. Make Jaquar or equivalent series in Grohe, kohler.
36
-
-
Providing & fixing Metropole flush valve Regular 32mm size (concealed body) with exposed shut off provision and round flange complete in all respect as per the direction of EIC.(Make- Jaquar FLV-CHR-1095N or equivalent series in kohler, Grohe make).
42
-
-
Providing & fixing Towel Rail 600mm long ( Jaquar Jaquar CAN-1111NM or equivalent series in Kohler, Grohe make)complete with accessories etc. complete in all respect as per the direction of EIC.
36
-
-
Providing & fixing Towel Ring (Jaquar CAN-1121BN or equivalent series in kohler, Grohe make) round with round flange complete with accessories etc. complete in all respect as per the direction of EIC.
36
-
-
Refillig of the available malba removed from the sunken portion of the toilets in layers under floor including watering ,ramming ,consolidating and dressing to make top level smooth for concreting as per the direction of Engineer-in-Charge.
30
-
-
Providing and fixing C.P. brass hand shower / Health Faucet wih 8 mm dia 1.2 metre long flexible tube & wall hook with flow restrictor . ( Jaquar ALD-CHR-573 or equivalent series of Grohe / Kholer make ) as per the direction of Engineer-in-Charge .
18
-
-
Providing & fixing aluminium sheet on existing door shutters (bathroom & W.C. Doors) using nails etc. complete in all respect as per the direction of Engineer-in- Charge.
50
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 32mm C.P.brass flush valve
42
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 32mm C.P.brass bottle trap
30
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 15mm CP brass basin mixer
18
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 15mm CP brass angle valve
78
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 15mm CP brass bib tap
72
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 32mm C.P. brass waste coupling
40
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 32mm C.P. bend
42
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 15mm CP brass wall mixer with overhead shower
18
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 125 mm C.P. Jali
78
-
-
Dismantling & buy back of old C.P. fittings from the toilets etc. complete as per the direction of EIC. 15mm C.P. concealed
12
-
-
Buy back of old G.I. pipe of any size with fittings etc. complete as per the direction of EIC. Upto 150mm dia
350
-
-
Buy back of old C.I. pipe of any size with fittings etc. complete as per the direction of EIC. Upto 150mm dia
500
-
-
Removal & buy back of old aluminium fittings such as L-Drop, Tower Bolt, Handles etc. from doors, windows, cupboard complete as per the direction of EIC.
60
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
3000
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2000
-
-
2 X 4.0 sq. mm + 1 X 2.5 sq. mm earth wire
608.38
-
-
Supplying & drawing following pair 0.5mm dia FRLS PVC insulated annealed copper conductor, unarmored telehone cable in the existing surface/recessed steel/PVC conduit as required. 2 Pair
200
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess in surface / recess including cutting the wall / floor/roof and making good the same in case of recessed conduit as required. 20mm
150
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch
770
-
-
2 way 5/6 Amp switch
80
-
-
15/16 A switch
150
-
-
3 pin 5/6 A socket outlet
240
-
-
6 pin 15/16 A socket outlet
150
-
-
Telephone socket
72
-
-
Bell Push
18
-
-
Supply & fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
90
-
-
Supplying and fixing modular blanking plate ( L&T , Legrand ) on the existing modular plate & switch box excluding modular plate as required.
100
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 module (75mm x 75mm )
90
-
-
3 Module (100 mmX75 mm)
170
-
-
4 Module
110
-
-
6 Module (200 mmX75 mm)
60
-
-
8 Module
90
-
-
12 Module
20
-
-
Supplying & fixing brass batten/angle holder including connections etc. as required.
240
-
-
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 way, Double door
12
-
-
Supplying & fixing following ways surface/recess mounting vertical type 415V TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4+24) Double door
6
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
250
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole
12
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A
6
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40A
12
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A
6
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
66
-
-
Supply and Installation of exhaust fan 230 mm (metal body)swipe, with louvers ( Crompton Greaves, Bajaj, Havells make in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
6
-
-
Supplying and intallation of slim LED tube light (20 watt) fitting (Philips ,Wipro make ) complete with connections , testing and commissioning etc. as required or as per the direction of Engineering in charge.
120
-
-
Dismantling and removal of existing M.S. boxes of any size after disconnections of swithes,sockets and applying sufficient insulating pvc tape and stacking to the ESD store as per the directions of Engineer-in-Charge.
540
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements