Institute Of Microbial Technology Tender

Dismantling of existing defective AHUs of different Capacity/ CFM along with all accessories, opening of the main supply air duct, chilled water line connection, electrical installations etc. as required. Shifting the dismantled AHU material from different floors to dumping area decided by Engineer-In-Charge.

SITC of Horizontal floor mounted AHU with VFD, frame made up of Hollow extruded Aluminum profile, chilled water double skin type made of 25 mm thick PUF injected (40 kg/m3 density) panels consisting of G.I. casing of thickness 0.8 mm outside (pre-coated) and 0.8 mm inside layer complete with fan section with (2 no. plug fans) twin plug fans at frequency not more than 50 HZ with TEFC high efficiency IE2 motor, suitable for static pressure as detailed below, cooling coil section with aluminum finned copper tubes (tube thickness not less than 0.5 mm and dia not less than 1/2”) 6 row cooling coil with SS 304 casing, 12 FPI, filter sections with 50mm thick metal viscous/ washable synthetic type air pre-filters (90% down to 10 Micron), plug fan shall be suitable for 415 + 10% volts, 50Hz, 3 phase, A.C Supply, SS 304 drain pan duly insulated, VI Pad, access doors for Fan, Coil & Filter section arrangement, PVC U-trap , maximum height of AHU will be upto 1750 mm from floor level including all accessories complete in all respect as per specifications and instructions of Engineer-in-charge, of following capacities. AHU - SystemAire, Flakt Group , Edgetech, Zeco Aircon, Carrier Aircon, VFD make : Danfoss/Siemens, FILTERS- Thermadyne, AAF, Sagicofim Plug, FAN- Kruger, Flaktwood ,Nicotra, MOTOR-ABB , Bharat Bijli, Crompton 25000 CFM/ 55 mm static pressure Note : - Rates are inclusive of liftinng , shifting of units up to 3th floor AHU room by manual means.

SITC of Horizontal floor mounted AHU, frame made up of Hollow extruded Aluminum profile, chilled water double skin type made of 25 mm thick PUF injected (40 kg/mm3 density) panels consisting of G.I. casing of thickness 0.8 mm outside (pre-coated) and 0.8 mm inside layer, complete with blower section (DIDW Centrifugal backward curved fan) suitable for static pressure as detailed below, minimum 2 bend GSS/ PVC eliminators, cooling coil section with aluminum finned copper tubes (tube thickness not less than 0.5 mm and dia not less than 1/2”) 6 row cooling coil with SS 304 casing, 12 FPI, filter sections with 50mm thick metal viscous/ washable synthetic type air pre-filters (90% down to 10 Micron), TEFC belt driven motor IE2 suitable for 415 + 10% volts, 50Hz, 3 phase, A.C Supply, SS 304 drain pan duly insulated, VI Pad, access doors for Fan, Coil & Filter section arrangement, Complete as per specifications and instructions of Engineer-in-charge, of following capacities. MAKES: AHU - SystemAire, Flakt Group , Edgetech, Zeco Aircon, Carrier Aircon FILTERS- Thermadyne, AAF, Sagicofim FAN- Kruger ,Nicotra MOTOR-ABB , Bharat Bijli, Crompton, 17000 CFM/ 55 mm static pressure, Note : - Rates are inclusive of liftinng , shifting of units up to 3th floor AHU room by manual means.