Himachal Pradesh Tourism Development Corporation Tender

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts. Flat surfaces such as soffits and suspended floor, roofs landing and like plain upto 200 mm in thickness.

Providing mild steel/tor steel reinforcement for RCC work including bending, binding also cost of binding wire and placing in position complete upto all floor level including carriage of materials in all lead and lifts.a) Tor steel

Providing and laying cement concrete 1:1.5:3 (1cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all leads, lifts and upto all heights.Suspended floors, roofs, landings, shelves and their supports balconies beams, girders bressumers and cantilevers

Providing and laying cement concrete 1:2:4 (1cement:2sand:4graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material in all lead and lifts.a) Foundation, footing, basis of columns and the mass concrete.

Providing and fixing 125mmx12mm thick readymade ornamental imported pine wood wooden plank ceiling with tongued and grooved jointing and wood screws nail fevicol (frame work and cover fillets to be measured and paid separately) including carriage of materials in all lead and lifts.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws etc. complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of material in all leads and lifts. Jindal make. For doors windows and ventilators and glazed partitions frames.

With ground/ opaque float glass panes of 4.0 mm thickness. (Saint Gobian/ Modi Guard make)

Providing and fixing 12mm thick prelaminated board phenol bonded exterior / interior grade both side

Providing and fixing 40x12mm thick readymade teak wood moulding to cover the joints of frame including carriage of material in all leads and lift.

Providing and laying granite stone flooring 20 mm average thickness over a base of 20 mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with grey cement slurry mixed with pigment to match shade of the granite stone including rubbing and polishing with granite polish finish grey/red including carriage of materials in all lead, lifts and heights.(basic rate not less than Rs.220/- per Sft)

Making half round moulding on edges of granite stone including carriage of materials in all leads and lifts.

Providing and fixing coloured/ printed ceramic tiles of 6 to 8 mm thickness in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry including carriage of materials in all lead and lifts and heights, Nitco/ Kajaria/ Rak make of minimum size 600x300 mm (basic rate not less than Rs.60/- per Sqft.

Providing and fixing 8 mm thick coloured glazed tiles Nitco / Kajaria / RAK 300x300mm make (Digital double charged) in flooring treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1cement:3sand) in white cement pigment to match the shade of tiles upto floor two level and above including all leads lifts and carriage of materials. (Basic rate not less than Rs. 65/- per Sqft.)

Providing and fixing anti skid water proof stain and impact resistant heavy duty vitrified Nitco/ Kazaria or equivalent 600x600x10 mm of approved shade and quality in floors laid over 12 mm thick cement mortar 1:3 (1cement:3sand) jointed with cement slurry mixed with pigment as required complete including carriage of materials in all lead, lfits and height (basic rate not less than Rs.65/- per Sq.ft.).

15 mm cement plaster in single coat on rough side of brick/concrete/stone wall for interior plastering in all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:5 (1cement:5sand) including carriage of materials in all leads and lifts and heights.

Wall Painting ( two coats) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease loose pieces of scale and sand papered smooth including applying of putty a required for making the surface including carriage of materials in all lead and lifts..

Extra for subsequent coat of plastic emulsion paint including preparing the surface even and sand papered smooth including carriage of materials in all lead and lifts and heights.

Polishing two or more coats with melamine polish on new wood and wood based surface to give an even shade as per direction including preparing the base surface cleaning of all dirt dust and sand papering etc. complete including carriage of materials in all leads, lifts and heights.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor and carriage of materials in all lead and lifts. Tata make/ Jindal Make Door Bend 15 mm dia

Door Bend 20 mm dia

Providing & fixing PVC D-plast / finolex / Supreme ventilating pipes fixed with approved adhesive including carriage of material in all lead and lifts.75mm Dia

110 MM dia

Providing & fixing PVC D-plast / finolex fixed with approved adhesive and accessories including carriage of material in all lead and lifts. Bends of required degree (any radius) 75 mm nominal size

110 mm nominal size

Plain Bend 75 mm Dia

Plain Bend 100 mm Dia

Collar 75 mm Dia

Collar 110 mm Dia

Providing & fixing PVC floor trap D-Plast / Finolex/ Supreme of self cleansing design with grating without vent arm complete including cost of cutting & making good the walls & floors including carriage in all lead and lifts.110 mm dia

Providing and fixing White vitreous china wash down water closet Cera Make Codi Series Cat No. 2069 ,2369,2269 with seat cover cistern and all fittings or equivalent series of Hinware / Jaquar make complete set with integral “P” or “S” trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) including carriage of materials in all lead and lifts.

Providing and fixing white wash basin counter top Cera make Cat No.1004 or Equivalent to Jaquar/Hindware make single hole for pillar tap with screws complete in all respect , including carriage of materials with in all leadsand lifts.

Providing and fixing C.P. brass bottle trap 32 mm dia for wash basin and sink including carriage of materials in all lead and lifts, Jal make, Cat No.1861 or equivalent series of Cera/ Jaquar make.

Providing and fixing 15 mm dia C.P. bib tap Jal make cat No.3031 or equivalent series of Cera/ Jaquar make. complete including carriage of material in all lead and lifts.

Providing and fixing C.P. soap dish Jal make queen series cat No. 22546 including carriage of material in all lead and lifts.

Providing and fixing CP. Grating Chilly make 125 mm dia ISI make heavy duty including carriage of material in all lead and lifts.

Providing and fixing 600 mm C.P. brass towel rail Jal make Cat no 26522 equivalent series of Cera/ Jaquar make. complete with C.P. brass brackets fixed with wooden / PVC plugs with C.P. brass screws including carriage of materials in all lead and lifts.

Providing and fixing single hole basin mixer Jal make cat No. 1578J or equivalent series of Cera/ Jaquar make. including carriage of material in all leads and lifts.

Providing and fixing single hole wall mixer with over head shower Jal make cat No. 17770 or equivalent series of Cera/ Jaquar make including carriage of material in all leads and lifts.

Providing and fixing C.P. brass angle valve 15 mm bore Jal make cat No.17480 or equivalent series of Cera/ Jaquar make including carriage of material in all lead and lifts.

Providing and fixing 450mm C.P. connection pipe with brass union (I.S.I. mark) including carriage of material in all lead and lifts.

Providing and fixing toilet paper holder complete Jal make, cat No.22540 or equivalent series of Jaquar /Cera make including carriage of material in all lead and lifts.

Providing & fixing brass full way valve with wheel including carriage of material in all lead and lifts (Leader/Zolato make)

15mm nominal bore

Providing and fixing C.P. towel ring Jal make cat No. 74524 or equivalent series of Jaquar/ Cera make including carriage of material in all lead and lifts.

Providing and fixing C.P. waste coupling of jal make cat No. 1051 or equivalent series of Jaquar/ Cera make with full thread 32 mm complete including jointing and carriage of materials in all leads and lifts

Providing and fixing C.P. jet Cat No. 9424 or equivalent series of Jaquar/ Cera make for W.C. seat including carriage of material in all lead and lifts.