Health And Family Welfare Department Tender

Providing & Fixing PCC Fencing Poles with 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects as per DWSS standard Drawing.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-3.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing D-4 & Analysis A-4 complete in all respects

Construction of Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7 & Analysis A-10.

Proving & fixing M.S. Sign Board as per Standard Size of DWSS.

Providing & Installing Testing & Commissioning of One No. Electrically driven Submersible Pumping set of 10.00 BHP SU/Clama/Sabbar capable of delivering 385 lpm against a head of 62 mtr alongwith electric panel board consisting of electric appliances such as automatic Star Delta Push Button or oil immersed Starter, Main Switch, VM, Ampere Meter, ELCB, Shunt Capacitor, Single Phase preventer, Indicating Lamps, Kit-Kat etc. including M.S. Column Pipe of suitable size (in 3 mtr lengths each with flanges , screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable (reputed make) complete in all respects as per standard Specifications.

Disinfection through Chlorination (MILTON ROY) It is proposed to provide one electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, for disinfection of water and to maintain a residual effect in the distribution system, suitable for delivering 0.5 to 5 Litres of Bleaching Powder solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 Kg.cm2, and suction lift not less than 1.5 m.

Providing & Installing 100mm i/d delivery main (from Tubewell to duck foot bend including cost of C.I D/F Pipes, D/F Sluice Valves, D/F NRV & Specials as C.I. Bends , Tail Piece Tees etc. inside the Pump Chamber as per standard design complete in all respects as per annexure A-12-1 to A-12-3 & Drawings D-12 & D-17.

Providing, stringing out, cutting, jointing and testing of ISI marked D.I. Pipes (S&S) as per IS:8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage & Excavation by mechanical means (JCB of Hydraulic excavator) in trenches for pipe lines straight or open cutting in streets or open area including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil outside/inside the town involving lead upto 15 meter complete in all respect. CSR Item No. 28.2(b), 28.7 (b)

D.I Pipe 100 mm i/d (At W/W Site) (excavation with JCB)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolts & Insertion sheet, all carriage complete (with the approval of Engineer in-charge) CSR item No. 28.27

100mm i/d

Construction of masonry Sluice Valve Chamber excluding Sluice Valve cover as per standard design & drawings of public health department. CSR item No. 28.66

Size 0.9 m x 0.9 m

Excavation by mechanical means (JCB of Hydraulic excavator) in trenches for pipe lines straight or open cutting in streets or open area including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect + Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B-Class, premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc, cutting, treading and testing in trenches in the ground complete. CSR item No. 28.2A (i) 28.36

100mm i/d = 473 @ Rs. 990/-

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolts & Insertion sheet, all carriage complete (with the approval of Engineer in-charge) CSR Item No. 28.27

100mm i/d

Construction of masonry Sluice Valve Chamber excluding Sluice Valve cover as per standard design & drawings of public health department. CSR item No. 28.66

Size 0.9 m x 0.9 m

Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings, including, dressing to correct sections and dewatering, provision for diversion for diversion for traffic, protection of existing services i.e., telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight ralls, boning rods, watching, etc, fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoll from the site of works, upto one chain (15m) complete in all respects. + Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials marked as per IS: 651-2007 class Sp-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc, cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching, haunching and envelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to uniform finish to the entire satisfaction of engineer-in-charge including all cartage etc complete in all respect. CSR Itme No. 29.5 (b) + 29.63

150mm i/d

200mm i/d

250mm i/d

300mm i/d

Constructing brick masonary manhole in cement mortor 1:5 (1 cement : 5 coarse sand) R.C.C top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 Kg/per cum foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects + Extra payable for every 0.30 m additional depth of manhole chamber in item 29.84 upto 1.80m increase in depth. CSR item No. 29.84 + 29.87

150mm i/d

200 mm i/d

250mm i/d

300mm i/d

Providing and erection of cast RCC ventilating column having minimum 200mm internal diameter including excavation, bases columns, caps, cowls or wire domes, etc. complete including carriage from the stores of the Engineer-in-Charge of works, to sites of works, loading and unloading fixing and jointing and setting the same in position complete in all respects.CSR item No. 29.40 (a)

Provision for construction of 1 No. RCC collecting tank of size 5.00 mtr dia, 35 KL/ day consisting of collecting tank cum pump chamber with 1.70 mtr working depth complete in all respects.

Provision for construction of 1 No. RCC septic tank of size 10mx3.00mx2.40m = 72.00 cum @ 1000 Kl = 72000 Ltr

Construction of Disposal Work Providing and fixing G.I. Barbed wire 3ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)

Providing & Fixing PCC Fencing Poles with 6' height, 3" x 3" Top & 4" x 3" Base provided with 3 nos. hooks complete in all respects as per DWSS standard Drawing.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-3.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing D-4 & Analysis A-4 complete in all respects

Construction of Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7 & Analysis A-10.

Excavation by mechanical means (JCB of Hydraulic excavator) in trenches for pipe lines straight or open cutting in streets or open area including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect (+) Providing, stringing out PVC ISI Marked as per ISI-4985 (Premium make such as supreme/ Finolex/Prince) casting along the trenches and laying the same in trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 160mm o/d pipe of 10 Kgf./ sqcm. CSR item No. 28.13 (A) (v) & 28.2 (a)

Providing & fixing Horizontal centrifugal sewerage type pumping set of 5.00 BHP Non Clog capable of delivering discharge 750 lPM of sullage against a head of 6 mtr including all accessories complete in all respects. CSR item No. 28.125 ©

Providing and fixing of fire Extinguisher CO2 type as per IS:15683 complete with all accessories as per manufacture specification ISI mark complete in all respect capacity 4.50 Kg. CSR item No. 28.124 c

Providing and fixing of Fire Extinguisher ABC Powder type (stored pressure) as per IS:15683 complete with all accessories as per manufactures specification ISI mark complete in all respect Capacity 6.00 Kg. CSR item No. 28.124 (c)

Providing and fixing of Fire Extinguisher mechanical foam type 9 ltr IS 15683 stored pressure type complete with all accessories as per manufacture specification ISI mark of approved make completion all respect capacity 9 ltr. CSR item No. 28.126