Department Of Cooperation Tender
View complete overview of Chandigarh Department Of Cooperation Tender
Department Of Cooperation Tender
Civil And Construction
Building Construction
Eprocure
Opening Date14 Feb 2025
Closing Soon24 Feb 2025
Tender Amount₹ 2,69,52,992
Costs
EMD
₹ 5,39,060Document Cost
₹ 5,900Tender Fee
₹ 5,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_Coop_134938_1Tender No
No.EE(HQ)/FED/25/95 dated 14/02.2025Tender Authority
Department Of Cooperation ViewPurchaser Address
-Website
http://eproc.punjab.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
SITC of 7W Spike light made of Grey pure polyester powder coated ,Pressure die-cast spike, snoot and aluminium housing for efficient thermal management, sturdiness, & excellent corrosion resistance. The housing provides IP66 /IK 7protection for high reliability in outdoor applications. High efficiency long life COB LED mounted on MCPCB of fixture. Lumen efficacy of LED 140 lm/W. Operating temperature: -upto +50 °C, Operating voltage range: 140 V - 270 V, Average life L70B50: 35000 hours, Prismatic chrome plated reflector for controlled beam angle of 60°. High quality toughened glass in clear finish for uniform light distribution, CRI70, THD15%, PF0.9, CCT 3000K/Red ,Blue, Green, IP 66, IK 07, Powered by an Built-In potted, electronic driver (SMPS based constant current supply) with lower THD, Output Open/ Short circuit protection, Surge voltage protection upto 4kV & other safety test as per IS:15885 Part 2/Sec 13. Approved Make: Philips/Tisva/Flos Model No. SGINC324231
30
-
-
... More
PART - FIRE FIGHTING WORKS
-
-
-
... More
Fire buckets (4 Nos) round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in White out side and handle with mounting bracket and stand fabricated by M.S. Angle
2
-
-
... More
Fire Alarm System
-
-
-
... More
FIRE ALAmetre SYSTEM Installation, testing & commissioning of Networkable Intelligent Addressable Fire Alametre Control Panel (EN/UL Approved) having provision of 4 loops but with following no of loop cards, each loop capable of connecting upto 99 detector and 99 devices, with minimum 200 character LCD display, multiple access levels, event history file in non-volatile memory (EEPROM) to store 20000 events, including Loop driver cards, network card, in-built battery backup for 72 hrs in standby mode & 30 min in alametre condition mode in metal enclosure and other required accessories.
1
-
-
... More
Installation, testing & commissioning of follwing type Addressable detectors (EN/UL approved) with detector mounting base and other required accessories.
-
-
-
... More
Photoelectric type Smoke detectors
85
-
-
... More
Rise Themetreal (Heat) detectors
1
-
-
... More
R.I. : fixing of response indicator
45
-
-
... More
Installation, testing & commissioning of follwing Addressable devices (EN/UL approved) with mounting base and other required accessories. Break Glass Type Manual Call Points in having "Break glass" message embedded on the glass.
5
-
-
... More
Installation, testing & commissioning of Strobe cum Sounder in ABS plastic body having sound adjustible Db level upto 90 dBs and a multi tone facility and 29.10 light ajustable to 110 candelas complete with mounting base, enclosure & required accessories.
5
-
-
... More
XLPE insulated 1.5 sq. mm. Armoured 2 core FRLSZH fire alarm cable (RED) Fire Survival Cable conforming IS-7098 (Part-1) 1988, 1100 Volt grade, 2/3/4/8/10/12 core ISI marked with copper stranded/solid conductor.
1800
-
-
... More
Isolator module (Fault / Loop)- Providing ,installation,testing and commissioning of Isolator module (Fault / Loop) suitable for operation and consisting of following : complete in all respect as reqd.
6
-
-
... More
Monitor Module-Providing ,installation,testing and commissioning of Monitor Module suitable for operation and consisting of following : complete in all respect as reqd.
2
-
-
... More
Control Module (for access triping off)- Providing ,installation,testing and commissioning of Control Module (for access triping off suitable for operation and consisting of following : complete in all respect as reqd.
5
-
-
... More
Electric driven main fire hydrant pump - Providing ,installation,testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following : complete in all respect as reqd.
-
-
-
... More
Monoblock pump set with bronze impeller, stainless steel shaft ,mechanical seal ,cast iron body ,900 LPM ,40 meter head complete with suitable rating induction motor TEFC type suitable for operation on 415volts, 3phase, 50HZ AC, 2950 RPM for enclosure, horiziontal foot mounted type with class B or F insulation etc complete as required. Including suitable cement concrete foundation duly plastered
1
-
-
... More
Fabrication, Supplying, Installation, Testing & Commissioning of out door type electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors,dust and vermin proof, powder coated of approved shade , cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class IP 52 i/c P/F following accessories etc. as required (For Terrace 1 nos. pump control)
1
-
-
... More
Supplying, fixing orifice plate made of 6mm thick stainless steel with orifice of required size in between flanged and landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 kg/cm complete as per specification required.
6
-
-
... More
PART - Technical Education Minister room
-
-
-
... More
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.
52
-
-
... More
MO and Conference Room Acoustics: Providing and fixing Acustic Panels of size as per design and of12mm thickness matt finish with 10 different colors with having noise reduction co-efficient of 0.45-0.6. The exposed surface and strengthened all edges . The core material is made with high density glasswool/ Polyster Fibre. The panel meet stringent international fire standards like class B1 and ASTM E-84-08. Complete as per directions of Engineer-in-Charge.
40
-
-
... More
Designer ceiling around AC: Providing and fixing at all height Wooden veneer false ceiling of 12 mm thick MR garde Particle board including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia X 40 mm long with 6 mm dia. Bolts to the angle hangers of 25 X 25 X5 mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to6.1 channel with connecting clips made out of 2.64 mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive # all screws @ 230 mm interval including joining and fixing to a flush finish. The wooden ceiling will be finished with the approved 4 mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electricals fixtures. including giving trap doors where ever required. Diffusers,cutouts for fire sprinklers etc. as per the specifications approved by architects Including necessary scaffolding supports, suspenders etc. All complete as per drawing and specification and direction of the Engineer-In-charge.
3
-
-
... More
Modular Aluminum Single Glass Partition
-
-
-
... More
SITC of Greenpro certified Aluminium glazed partition system with approx 50 x 17 thick snap fit frame system, made of main frame section and 2 snap-fit moulding, as wall, ceiling, vertical and floor profiles, suitable for 10/12 mm float toughened / non toughened glass, with gaskets. Finished in anodizing or polyester powder coat as per approval of Engineer-In-charge. weight 1.5 kg/sqm and Green certified by IGBC
37.98
-
-
... More
Aluminum Stile ( Glass) Door with Door Frame
-
-
-
... More
SITC of Green certified single leaf Aluminium stile modular glass door with approved make fittings and 10 mm float toughened clear glass. Aluminium stile door to have stile of approx 75 x 40 and rails 85 x 38 mm sections in extruded aluminium, duly powder coated/ anodized matching the exact color and finish of the glazed partition, with appropriate gaskets. The door to be provided with lock, handle,concealed door closer and door stopper. weight 6.5 kg/sqm and Green certified by IGBC. Complete in all respects to the entire satisfaction of Engineer-In-charge.
3
-
-
... More
SITC of factory made uPVC black colour casement/casement cum fixed glazed windows comprising of 6 mm glass uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made . Complete in all respects to the entire satisfaction of Engineer-In-charge.
-
-
-
... More
Fixed window / ventilator made of(small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm)Complete in all respects to the entire satisfaction of Engineer-In-charge.
8
-
-
... More
Providing & fixing Blinds, must be comprising 100% Polyester. The fabric must be Dual - Translucent & Blackout Non-Woven Fabric duly coated, Weight 178GSM for Translucent & 96GSM for Blackout, Width 300 cm with Thickness 0.35mm to 0.45mm. Fabric cell must be 38mm. Fabric must be Lead Free and it must have complied Green Guard Certification. The Colour fastness should be 4. The fabric must comply UV protection. Operating mechanism must be made up of high strength ABS Plastic. The mechanism must be operating with the use of Cord Lock. The thickness of Nylon operating cord must be of 1.40 MM, and thickness of Nylon lifting cord must be of 0.90mm. There must also be Cord Guilder, Plastic Cord Button and Hold Down & Hold Up Strips to hold the fabric at the top and bottom. The top channel must be extruded by non-rusting Aluminium alloy with grade (6063T) and with 1.4mm thickness duly powder coated for long life. The Channel must be designed with support beam to keep all have a pocket for holding the fabrics in position. Available in 38 & 45mm diameters for small and big blind respectively. The mounting brackets should be universal and must be capable of mounting inside / outside / ceiling / wall with the clutch on either the right or left end of the tube. The Brackets are made of Mild Steel with the grade (DD) and are powder coated for a greater finish. Brackets shall be accommodating overhead or side mounting with clutch assembly on either end of the blind. Complete in all respects to the entire satisfaction of Engineer-In-charge.
39.8
-
-
... More
Motor with Adaptor, Remote, 2 Pin-Plug Adaptor, Channel Covers etc. Motor dedicated to interior applications. Quite operation below 50 db.
Radio frequency - 433.92 MHz, ASK
Operating voltage - DC 24V
Rotation Speed - 39 rpm
Torque - 1 NM (Per Layer)
Range of Remote Control - 30 M
Load Capacity - 8 KG (4 KG per layer) (Maximum)
Measurement - W 2.7 M x H 3.5 M (Maximum)
W 1 M x H 1 M (Minimum) Complete in all respects to the entire satisfaction of Engineer-In-charge.
7
-
-
... More
SITC of highly durable decorative translucent vinyl film for interior glass finish. It should come with pressure sensitive, acrylic and permanent adhesive. The frosted crystal etch film should have thickness of approx. 70 microns. Adhesion type permanent solvent-based adhesive for clean removability, Metascape® air release. Adhesion to glass in 20 mins - 15N/25mm nominal and Adhesion to glass in 24hrs -20N/25mm nominal. Application tempreature is +10°C to +50°C. Service temperature is -30°C to +110°C Light Transmission Crystal Etch is 56%. Release Liner Weight is 135 gsm nominal. Frosted crystal etch glass finishes should give the uniform appearance with a dusted or frosted sparkle effect and suitable for interior and exterior glass surfaces. The crystal glass finishes should be used only on glass, acrylic, polycarbonate surfaces. This film can be plotter cut in as per customized design. The film should have warranty 5 years for glass (no warranty will be applicable on printed product). This film should have cheimical resistant to mineral oils, fats and fuels, aliphatic solvents, mild acids, salt and alkali for e.g. diesel oil, gasoline, paraffin, hydraulic oil, antifreeze, soap suds etc..This film have fire rating Class B - BS EN 13501-1:2007 Class 0 - BS 476 pt7 (glass + Painted 3mm Aliminium). Regulation REACH & RoHS compliant. Complete in all respects to the entire satisfaction of Engineer-In-charge.
10
-
-
... More
SITC of highly durable decorative translucent clear gloss film for interior. It should come with pressure sensitive, acrylic and permanent adhesive. The face film is calender vinyl, The clear glass film should have thickness of approx. 70 microns . The liner of the film should be Layflat kraft with PE coating with thickness of approx. 140GSM. The tensile strength of glass film should be 50N/25mm MD / 48N/25mm TD nominal. This film have fire rating Class B - BS EN 13501-1:2007. This Film have chemical resistant on unprinted film resistant to mild acids, aliphatic solvents, salt and alkali, diesel, gasoline, paraffin, hydraulic oil, antifreeze. Application suitable for wet and dry applications. Adhesive type is solvet based removable adhesive. This film can print on solvent,Eco Solvent, Latex and UV printing.The film should have warranty 3 years for glass. Complete in all respects to the entire satisfaction of Engineer-In-charge.
35.22
-
-
... More
Wall Panelling (STIC): Providing and fixing Wall & Column Panelling for the existing surfaces to be made with 9 mm thk. BWP ply backing and finished with approved 4mm thk. Veneer and melamine polish including skirting and band at top in the same alignment with a groove and including teakwood moulding of approved size as shown in detailed drawing or as directed Complete in all respects to the entire satisfaction of Engineer-In-charge.
248.08
-
-
... More
Storage Behind Minister’s Desk (SITC): Providing and fixing full height storage cabinet of 9" depth made of 19mm thick board of approved make without shutters. All exposed surfaces to be finished with 4 mm thick veneer of approved shade and melamine polished of natural colour of wood. Complete in all respects to the entire satisfaction of Engineer-In-charge.
111.6
-
-
... More
Minister Washroom Wardrobe: Providing & Fixing of Wardrobe in All structure made by 18mm Post laminated commercial MDF with 12mm back plywood, and 4 mm veneer on exposed faces with melamine polish, 2"x2" moulding on edges with PU polish with Single lock independent type with shelves as per design, including hanging rod of specified make with minimum a set of 6 no. hangers in each storage unit. Internal faces of storages to be finished with 1 mm thick laminate. All necessary hardware to be Kich/Aarch. (Shop drawings to be given by the contractor and design to be approved by architect.) Height to be standard 8'0" and width to be 2'0". Note: The rate to be inclusive of LED light with Automatic magnetic Sensor Drawer Closet Wardrobe LED light White Lamp Powered By: 3 x AG13Button Cell, 1 no. to be installed in each wardrobe including all taxes and providing & fixing. Complete in all respects to the entire satisfaction of Engineer-In-charge.
12
-
-
... More
Full Height Wall Panelling with Hidden Door (SITC): Providing and fixing Wall & Column Panelling for the full height existing surfaces to be made with 9 mm thk. BWP ply backing and finished with approved 4mm thk. Veneer and melamine polish including skirting and band at top in the same alignment with a groove and including teakwood moulding of approved size and incorporates a discreet hidden door mechanism for access to concealed spaces as shown in detailed drawing or as directed Complete in all respects to the entire satisfaction of Engineer-In-charge.
261.25
-
-
... More
Double Leaf Wooden Door (SITC): Providing and fixing of 38mm thk double leaf wooden door measuring 8 feet in height and 4 feet 6 inches in width including Chowkhat of teak wood, finished with 4.0mm thk approved veneer finish including melamine polish on both sides including heavy duty floor springs, approved locks, handles, hinges, knobs etc. The door incorporates vision glass panels, each sized 4 feet 3 inches by 1 foot 3 inches, featuring hermetically-sealed 6-12-6 mm insulated glass units for optimal thermal and acoustic insulation. The installation includes all hight Complete in all respects to the entire satisfaction of Engineer-In-charge.
1
-
-
... More
Painting with acrylic emulsion paint of Stucco Marble satin finish/ smooth finish and manufacture to give an even shade to wall and ceiling etc. applied evenly with roller to give approved matt or stippled finish complete, including cleaning preparation , putting etc. over coat of cement primer of surface and coat of approved primer as per manufacturer’s specification:Two or more coats on new work/and old work including scraping of old paint and disposal of mulba to authorized dumping grounds.( for old and new work including peeling/removing old paint. ) FOR ROOMS CEILING, CORRIDOR-WALLS/CEILING. Complete in all respects to the entire satisfaction of Engineer-In-charge.
70.98
-
-
... More
PART- SIGNAGE (SITC Work)
-
-
-
... More
Providing and fixing of national amblem (1' height) of brass material complete in all respects to the entire satisfaction of Enginner-In-charge.
1
-
-
... More
Providing and fixing of national amblem (2' height) of brass material complete in all respects to the entire satisfaction of Enginner-In-charge.
1
-
-
... More
Providing and fixing 6" x 18" size steel name plate with text print on brick wall complete in all respects to the entire satisfaction of Enginner-In-charge.
3
-
-
... More
Providing and fixing vinyl sticker of size 6" x 18" on glass door as per design approved by the architect complete in all respects to the entire satisfaction of Enginner-In-charge.
8
-
-
... More
Providing and fixing vinyl graphc sticker (6' dia) of Dr. A. P.J. Abdul Kalam on Round glass window complete in all respects to the entire satisfaction of Enginner-In-charge.
1
-
-
... More
Providing and fixing acrylic laser cut stand off lattering as per design approved by the architect of size 5' x 2' on brick wall complete in all respects to the entire satisfaction of Enginner-In-charge.
1
-
-
... More
Providing and fixing toilet door graphic in vinyl sticker of approved size on toilet doors complete in all respects to the entire satisfaction of Enginner-In-charge.
2
-
-
... More
Providing and fixing brass cut Punjab government logo on wall of reception area complete in all respects to the entire satisfaction of Enginner-In-charge.
1
-
-
... More
Providing and fixing acrylic laser cut stand off lattering as per design approved by the architect of size 5' x 3'6" on brick wall complete in all respects to the entire satisfaction of Enginner-In-charge.
1
-
-
... More
Providing and fixing Totem signage made with monolithic structures with pleasant design particularly suitable for communicating identity and image or first stage of flow direction. The panelling can be made in a single piece or subdivided into separate modules. MS pipe structure with ACP sheet as a base & router cut 3 mm acrylic letters. Complete in all respects to the entire satisfaction of Engineer-In-charge.
Size of Totem - 6' x 12'
1
-
-
... More
PART- SANITARY AND PLUMBING
-
-
-
... More
Disposal of rubbish/malba from any floor to approved site and cleaning the site complete with lead of 10km in all respects to the entire satisfaction of Engineer-in-charge.
1
-
-
... More
Providing and fixing automatic soap dispenser of Jaquar make make complete in all respects to the entire satisfaction of Engineer-in-charge.
3
-
-
... More
Providing and fixing BOLT TOUCH-FREE INFRARED HAND DRYER Jaquar make complete in all respects to the entire satisfaction of Engineer-in-charge.
3
-
-
... More
Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) of reputed make including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects and desired by the Engineer-in-charge at site.
3
-
-
... More
Providing and fixing counters (vanity or in any other location) with 12 mm thick acrylic solid surface manufactured as per ISO 19712-2. Solid surface used should be Microbial resistant and resistant to mould growth, boiling water resistant, heat resistant, impact resistant, stain resistant, scratch resistant as per ASTM G171 ( min 800 MPa), Green Guard certified and with a fire rating conforming Class 1 as per BS 476 (Part 6 and 7). Acrylic solid surface having minimum density of 1.65 g/cm3, fixed over Aluminum Sections/19MM Marine Grade ply/ BWP board designed to support a weight of 25 Kg. per Sqmtr. with suitable flexible adhesives (moisture cured Silicon Sealants) as per manufacturer's specification and guideline, including fascia and back splash area as per approved drawings and design. The Joints of Solid surface should be joined with adhesives having Low VOC of 238 g/ litre as per UL 2818 and SCAQMD. Complete in all respects to the entire satisfaction of Engineer-In-charge.
-
-
-
... More
The Counter top should be finished with moulding of edges, buffing of surface, making of holes for plumbing fixtures, flushing of joints, installing of necessary hardware, sealing with silicon sealants, etc. All complete as per direction of Engineer In charge. The Solid surface used should confirm to impact resistance of more than 180cm in ball drop test as per ISO EN 438-2 Clause 21, The plan and elevation area (horizontal and vertical) excluding wash basin area will be measured for payment. Fabrication to be done as per the manufacturers fabrication manual, Solid surface manufacturer to provide 10 years installed warranty on the works. Complete in all respects to the entire satisfaction of Engineer-In-charge.
11.15
-
-
... More
Providing and fixing glazed vitrified tiles of size 600X1200 mm of make "NITCO/ KAJARIO/ JOHNSON/ SOMANY" or other premium brand for wall tiles complete over 12.5mm thick base cement sand mortar 1:4 & filled with white cement slurry and pigment to make the shade in joints including bevelled corners complete in all respects.
52.04
-
-
... More
PART- TEM Office (CIVIL WORK)
-
-
-
... More
Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. Complete in all respects to the entire satisfaction of Engineer-In-charge.
67
-
-
... More
MO and Conference Room Acoustics: Providing and fixing Acustic Panels of size as per design and of12mm thickness matt finish with 10 different colors with having noise reduction co-efficient of 0.45-0.6. The exposed surface and strengthened all edges . The core material is made with high density glasswool/ Polyster Fibre. The panel meet stringent international fire standards like class B1 and ASTM E-84-08. Complete in all respects to the entire satisfaction of Engineer-In-charge.
18
-
-
... More
Designer ceiling around AC: Providing and fixing at all height Wooden veneer false ceiling of 12 mm thick MR garde Particle board including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia X 40 mm long with 6 mm dia. Bolts to the angle hangers of 25 X 25 X5 mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to6.1 channel with connecting clips made out of 2.64 mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive # all screws @ 230 mm interval including joining and fixing to a flush finish. The wooden ceiling will be finished with the approved 4 mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electricals fixtures. including giving trap doors where ever required. Diffusers,cutouts for fire sprinklers etc. as per the specifications approved by architects Including necessary scaffolding supports, suspenders etc. All complete as per drawing and specification and direction Complete in all respects to the entire satisfaction of Engineer-In-charge.
6
-
-
... More
Providing and fixing glazed vitrified tiles of size 600X1200 mm of make "NITCO/ KAJARIO" or other reputated brand for wall tiles complete over 12.5mm thick base cement sand mortar 1:4 & filled with white cement slurry and pigment to make the shade in joints including bevelled corners complete in all respects.
78
-
-
... More
Modular Aluminum Single Glass Partition
-
-
-
... More
Supply of Greenpro certified Aluminium glazed partition system with approx 50 x 17 thick snap fit frame system, made of main frame section and 2 snap-fit moulding, as wall, ceiling, vertical and floor profiles, suitable for 10/12 mm float toughened / non toughened glass, with gaskets. Finished in anodizing or polyester powder coat as per architect’s approval. Complete in all respects to the entire satisfaction of Engineer-In-charge. Weight 1.5kg/Sqm and Green certified by IGBC
191.88
-
-
... More
SITC of Greenpro certified Aluminum glazed partition system, with approx 60 x 21mm thick snap fit frame system as wall connection, ceiling, vertical and floor profiles, which can accommodate multiple glass configurations even post-construction, for single or double 10mm /12 mm float or VIG 18mm / 25mm glass including necessary gaskets. The system to have superior acoustic performance with provision for rubber pad at connection with surfaces. Rates without glass, Powder coat finished. Raw mill and anodized finish available. Complete in all respects to the entire satisfaction of Engineer-In-charge. weight 3.7 Kg/sqm and Green certified by IGBC
47.52
-
-
... More
Aluminum Stile ( Glass) Door with Door Frame
-
-
-
... More
SITC of Green certified single leaf Aluminium stile modular glass door with approved make fittings and 10 mm float toughened clear glass. Aluminium stile door to have stile of approx 75 x 40 and rails 85 x 38 mm sections in extruded aluminium, duly powder coated/ anodized matching the exact color and finish of the glazed partition, with appropriate gaskets. The door to be provided with lock, handle,concealed door closer and door stopper. Complete in all respects to the entire satisfaction of Engineer-In-charge. weight 6.5 Kg/sqm and Green certified by IGBC
40
-
-
... More
SITC of factory made uPVC black colour casement/casement cum fixed glazed windows comprising of 6mm glass uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension on higher side shall be accepted but no extra payment on this account shall be made .
-
-
-
... More
Fixed window / ventilator made of(small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm)Complete in all respects to the entire satisfaction of Engineer-In-charge.
189.15
-
-
... More
Providing & Fixing Toilet Cubicle System in SS-304 MEDIUM Series of size Width 875mm x Depth 1270mm x Height 2050mm, Door Size - 711mm x 1700mm, Divider Height - 1850mm, Comprising of Rigid SS components: (1) SS304 Indicator Lock (2) SS304 Automatic Reverse Hinges (3) SS304 Height Adjustable Legs (4) SS304 Door Knob (5) SS304 Coat Hook & Aluminum (Brush Finish): (6) Top Rail (7) h Section (8) U Section (9) Silicon Strip to be inserted in h Section to provide Noise Dampening (10) Screws & Plugs with (11) Water, Chemical, Heat, Bacteria, Fire, Impact & Scratch Resistant 12 mm T Line High Pressure Compact Laminate. The 12mm HPL to have a minimum density of 1350 kg/m3 with a warpage limit of .5% of its length. The Top Rail will be fixed end to end and all the mid and end pilasters will get fixed into it. The whole system will have Upto 150 mm clearance height to the floor. U Sections will be used for Board to Board Jointing and Board to Wall Fixing. Complete in all respects to the entire satisfaction of Engineer-In-charge.
8
-
-
... More
Providing & fixing Blinds, must be comprising 100% Polyester. The fabric must be Dual - Translucent & Blackout Non-Woven Fabric duly coated, Weight 178GSM for Translucent & 96GSM for Blackout, Width 300 cm with Thickness 0.35mm to 0.45mm. Fabric cell must be 38mm. Fabric must be Lead Free and it must have complied Green Guard Certification. The Colour fastness should be 4. The fabric must comply UV protection. Operating mechanism must be made up of high strength ABS Plastic. The mechanism must be operating with the use of Cord Lock. The thickness of Nylon operating cord must be of 1.40 MM, and thickness of Nylon lifting cord must be of 0.90mm. There must also be Cord Guilder, Plastic Cord Button and Hold Down & Hold Up Strips to hold the fabric at the top and bottom. The top channel must be extruded by non-rusting Aluminium alloy with grade (6063T) and with 1.4mm thickness duly powder coated for long life. The Channel must be designed with support beam to keep all have a pocket for holding the fabrics in position. Available in 38 & 45mm diameters for small and big blind respectively. The mounting brackets should be universal and must be capable of mounting inside / outside / ceiling / wall with the clutch on either the right or left end of the tube. The Brackets are made of Mild Steel with the grade (DD) and are powder coated for a greater finish. Brackets shall be accommodating overhead or side mounting with clutch assembly on either end of the blind. Complete in all respects to the entire satisfaction of Engineer-In-charge.
98.3
-
-
... More
Motor with Adaptor, Remote, 2 Pin-Plug Adaptor, Channel Covers etc. Motor dedicated to interior applications. Quite operation below 50 db.
Radio frequency - 433.92 MHz, ASK
Operating voltage - DC 24V
Rotation Speed - 39 rpm
Torque - 1 NM (Per Layer)
Range of Remote Control - 30 M
Load Capacity - 8 KG (4 KG per layer) (Maximum)
Measurement - W 2.7 M x H 3.5 M (Maximum)
W 1 M x H 1 M (Minimum) Complete in all respects to the entire satisfaction of Engineer-In-charge.
7
-
-
... More
SITC of highly durable decorative translucent vinyl film for interior glass finish. It should come with pressure sensitive, acrylic and permanent adhesive. The frosted crystal etch film should have thickness of approx. 70 microns. Adhesion type permanent solvent-based adhesive for clean removability, Metascape® air release. Adhesion to glass in 20 mins - 15N/25mm nominal and Adhesion to glass in 24hrs -20N/25mm nominal. Application tempreature is +10°C to +50°C. Service temperature is -30°C to +110°C Light Transmission Crystal Etch is 56%. Release Liner Weight is 135 gsm nominal. Frosted crystal etch glass finishes should give the uniform appearance with a dusted or frosted sparkle effect and suitable for interior and exterior glass surfaces. The crystal glass finishes should be used only on glass, acrylic, polycarbonate surfaces. This film can be plotter cut in as per customized design. The film should have warranty 5 years for glass (no warranty will be applicable on printed product). This film should have cheimical resistant to mineral oils, fats and fuels, aliphatic solvents, mild acids, salt and alkali for e.g. diesel oil, gasoline, paraffin, hydraulic oil, antifreeze, soap suds etc..This film have fire rating Class B - BS EN 13501-1:2007 Class 0 - BS 476 pt7 (glass + Painted 3mm Aliminium). Regulation REACH & RoHS compliant. Complete in all respects to the entire satisfaction of Engineer-In-charge.
263.31
-
-
... More
SITC of highly durable decorative translucent clear gloss film for interior. It should come with pressure sensitive, acrylic and permanent adhesive. The face film is calender vinyl, The clear glass film should have thickness of approx. 70 microns . The liner of the film should be Layflat kraft with PE coating with thickness of approx. 140GSM. The tensile strength of glass film should be 50N/25mm MD / 48N/25mm TD nominal. This film have fire rating Class B - BS EN 13501-1:2007. This Film have chemical resistant on unprinted film resistant to mild acids, aliphatic solvents, salt and alkali, diesel, gasoline, paraffin, hydraulic oil, antifreeze. Application suitable for wet and dry applications. Adhesive type is solvet based removable adhesive. This film can print on solvent,Eco Solvent, Latex and UV printing.The film should have warranty 3 years for glass. Complete in all respects to the entire satisfaction of Engineer-In-charge.
188.82
-
-
... More
Wall Panelling (STIC): Providing and fixing Wall & Column Panelling for the existing surfaces to be made with 9 mm thk. BWP ply backing and finished with approved 4mm thk. Veneer and melamine polish including skirting and band at top in the same alignment with a groove and including teakwood moulding of approved size as shown in detailed drawing or as directed Complete in all respects to the entire satisfaction of Engineer-In-charge.
1068.82
-
-
... More
Minister Washroom Wardrobe (SITC): Providing & Fixing of Wardrobe in All structure made by 18mm Post laminated commercial MDF with 12mm back plywood, and 4 mm veneer on exposed faces with melamine polish, 2"x2" moulding on edges with PU polish with Single lock independent type with shelves as per design, including hanging rod of specified make with minimum a set of 6 no. hangers in each storage unit. Internal faces of storages to be finished with 1 mm thick laminate. All necessary hardware to be Kich/Aarch. (Shop drawings to be given by the contractor and design to be approved by architect.) Height to be standard 8'0" and width to be 2'0". Note: The rate to be inclusive of LED light with Automatic magnetic Sensor Drawer Closet Wardrobe LED light White Lamp Powered By: 3 x AG13Button Cell, 1 no. to be installed in each wardrobe including all taxes and providing & fixing. Complete in all respects to the entire satisfaction of Engineer-In-charge.
135.99
-
-
... More
Double Leaf Wooden Door (SITC): Providing and fixing of 38mm thk double leaf wooden door measuring 8 feet in height and 4 feet 6 inches in width including Chowkhat of teak wood, finished with 4.0mm thk approved veneer finish including melamine polish on both sides including heavy duty floor springs, approved locks, handles, hinges, knobs etc. The door incorporates vision glass panels, each sized 4 feet 3 inches by 1 foot 3 inches, featuring hermetically-sealed 6-12-6 mm insulated glass units for optimal thermal and acoustic insulation. The installation includes all hights Complete in all respects to the entire satisfaction of Engineer-In-charge.
2
-
-
... More
Painting with acrylic emulsion paint of Stucco Marble satin finish/ smooth finish and manufacture to give an even shade to wall and ceiling etc. applied evenly with roller to give approved matt or stippled finish complete, including cleaning preparation , putting etc. over coat of cement primer of surface and coat of approved primer as per manufacturer’s specification:Two or more coats on new work/and old work including scraping of old paint and disposal of mulba to authorized dumping grounds.( for old and new work including peeling/removing old paint. ) FOR ROOMS CEILING, CORRIDOR-WALLS/CEILING. Complete in all respects to the entire satisfaction of Engineer-In-charge.
71.2
-
-
... More
Recovery of dismantled aluminium from doors, windows etc. complete in all respects to the entire satisfaction of Engineer-In-charge.
50
-
-
... More
Recovery of dismantled mild steel from doors, windows etc. complete in all respects to the entire satisfaction of Engineer-In-charge.
783
-
-
... More
PART- ELECTRICAL (INDOOR + OUTDOOR)
-
-
-
... More
Supply and drawing of following pair 0.5 sq.mm FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ pvc conduit as required.
-
-
-
... More
4 Pair
290
-
-
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
75
-
-
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.
1000
-
-
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
650
-
-
... More
SITC of LED Downlighter with CCT-4000K, Material to be Alumunium (Round) of wattage 20W and lIght Output 1550 lumen (+/-10%) . The performance life should be 50,000 hours with surge protection of 2.5KV and Wide voltage protection 220V-240V.The Fixture should conform to IEC standard 60598 and BIS LM-79,LM-80 need to be submitted as applicable.
50
-
-
... More
SITC of LED Tiltable COB with CCT-2700K. Material to be Alumunium of dimensions (Round) of wattage 12W .The lIght Output should be 820 lumen (+/-10%) .The performance life should be 20,000 hours with Strong focussed 24° beam and surge protection of 2.5KV.The Fixture should conform to BIS Safety with wide surge protection of 160V-360V LM-79,LM-80 need to be submitted as applicable.
24
-
-
... More
SITC of LED surface Downlighter with CCT-6500K, Material to be Alumunium (Round) of wattage 12W and lIght Output 1440 lumen (+/-10%) . The performance life should be 35,000 hours with surge protection of 2.5KV and Wide voltage protection 220V-240V.The Fixture should conform to IEC standard 60598 LM-79,LM-80 need to be submitted as applicable.
23
-
-
... More
SITC of recessed mounted 4-5 W/M Flexible LED Strip with high performance LEDs, suitable for mounting in cove for indirect lighting with non- integral electronic low THD (20%) LED driver. Lumen Output of 1500lumens. CRI 70, Color temperature 3000K, IP20, IK03. Life class of 50,000 hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV; Protection: Reverse Polarity, Open & Short Circuit. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs. 3/5m Roll box considered for quantity purpose only.
110
-
-
... More
SITC of recessed mounted 4-5 W/M Flexible LED Strip with high performance LEDs, suitable for mounting in cove for indirect lighting with non- integral electronic low THD (20%) LED driver. Lumen Output of 1500lumens. CRI 70, Color temperature 5700K, IP20, IK03. Life class of 50,000 hrs @ L70, Operating Temperature: -10 TO +45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ; Internal Surge Protection:3 KV; Protection: Reverse Polarity, Open & Short Circuit. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs. 3/5m Roll box considered for quantity purpose only.
235
-
-
... More
SITC of LED Spotlight with CCT-4000K, Material to be Alumunium of dimensions L:280W:45 H:49 mm of wattage 20W and lIght Output 1600 lumen (+/-10%) . The performance life should be 35,000 hours with surge protection of 2KV and Wide voltage protection 160V-360V.The Fixture should conform to IEC standard 60598 and BIS. Photometry Eye Safety Report,LM-79,LM-80,SDCM Report,Unified Glare Rating and Eye Comfort Spec report need to be submitted as applicable.
8
-
-
... More
SITC of LED fixture with CCT-4000K, with lumen effeciancy of 125lm/watt. Material to be Alumunium of dimensions L:1126 (With Joining Details) W:53 H:70 mm of wattage 20W and having IEC saftey class 1 standared with IP 20 finger protected .The CRI should be above 70 . and ambient tempertaure range 0 to + 45 .The life should be 50,000 hours with surge protection of 2KV with voltage protection of upto 220v-240V.Photometry Eye Safety Report,LM-79,LM-80,SDCM Report,Unified Glare Rating and Eye Comfort Spec report need to be submitted as applicable.
10
-
-
... More
SITC of 4" wide Linear LED Strip Aluminium Profile (recessed LED channel) with diffuser.
166
-
-
... More
Supply of 2.2 Mtr. Decorative Pole made out of Complete Aluminium casting, Inbuilt Control Box at the bottom of the pole For space For House MCB & Terminal strip etc along with Supply of 40w Post Top LED Light fixture made of Aluminium Die Cast & Aluminium Spun housing with front opening PC Diffuser having IP65 protection, PF.90, Lumen-110/w with High Efficiency LED, THD-10%, potted driver with 6kva surge Protection.
1
-
-
... More
PART- AUDIO VIDEO SOLUTION
-
-
-
... More
Meeting Room
-
-
-
... More
SITC of 65" 4K UHD Display Panel, 350 nits Brightness, 4K Mainstream Proff Display for AVSI&Digital Signage Project with New symmetrical slim Design/ Intelligent UHD upsclalling/ Dynamic Crystal Color/ Narrow Bezel Design/ Slim and Flat back Design/ and Web Browsing facility/4000:1 Contrast Ratio/ Stereo MiniJack/ HDMI / DVI/ RS232 / USB / RJ45 /Wi-Fi & Bluetooth built-in /Built-in-Speakers /EDGE LED/ Haze coating/ Tizen 4.0/ PC Less Conf/ VM Ware Horizon/1.7GHz Quad-Core CPU/ 8GB Storage/ 8MS Response time/ EMC class B compliant/EPEAT Reg./ IP5X for Dust Proofing/ HDR+
1
-
-
... More
SITC of VC Display Trolley, adjustments with an angle of 15 degrees(+ or -), Universal in design to fit 42″ to 65″ displays, can hold up to 50kg, VESA compliant as above display, Camera/VC Bar Tray or mount.
1
-
-
... More
SITC of Integrated All-in-one video collaboration bar for Meeting rooms. Featuring 8MP camera and 120° super-wide-angle lens,electric privacy shutter,AI technologies including Auto Framing and Speaker Tracking With 8 MEMS microphone arrays and noise proof algorithm,upporting human body detection,supports for cloud video platforms like Zoom and Microsoft Teams means no PC or Mac is required. Capable of content sharing & whiteboard that making the meeting more communicative and collaborative, Built-in Bluetooth, Built-in dual-band Wi-Fi,Dual screen support.
1
-
-
... More
SITC of 4K Wireless Presentation Pod,Plug & Play allows users to enjoy instant content sharing. No extra software or driver is required, Touch & Go, just click the button and start collaboration right away. Work with Most Devices, free collaboration on most devices with a full featured USB-C Port. Supports Dual-band 2.4GHz/5GHz Wireless Networks & WPA Data Encryption,4-Screen Casting,Collaboration-Annotation- Virtual Whiteboard,Intuitive Remote Control- Multiple Screens Share.
1
-
-
... More
SITC of Universal Switcher Shall provide an input switching device with included rack mounting brackets that supports USB data and AV signals.Shall be a switcher for HDMI video and embedded digital audio signals with associated USB Host ports with a third USBC connection for AV, USB data and power delivery.Shall support local device connection Shall support computer and video resolutions up to 4096x2160 at 60 Hz, 8-bit at 4:4:4 chroma sampling. Shall support HDMI specifications including data rates up to 21.6 Gbps, HDR+, Dolby Vision, 12-bit Deep Color, 3D, and HD lossless audio formatsVideo Input requirements Input Requirements-Shall provide one female HDMI Type A connectors used to connect HDMI source devices.Shall provide automatic input cable equalization up to 25 feet (8 meters) for signals up to 4096x2160 at 60 Hz with 8-bit color depth when used with Extron HDMI Pro cables.Shall provide female DisplayPort connector used to connect a DisplayPort source device,Shall provide one female USB-C connector used to connect a USB-C source device for DisplayPort Alternate Mode video.AV Output Requirements-Shall provide one female HDMI Type A connector used to connect HDMI sink.Shall provide automatic management of color bit depth based on the capabilities of the connected display, as reported by display EDID Assignment of pre-stored, captured, or uploaded files.Maintain continuous EDID communication with the connected sources.Shall be HDCP 2.3 compliant.Electronically accessible over Ethernet, or USB connection.Shall provide 250mW power on the output for active cables.USB input Requirements-Shall provide two female USB 3.2 B connector used to connect USB Hosts for input 1 & 2.Shall provide one female USB-C connector used to connect a USB-C source device for 10 Gbps data connectionUSB Output Requirements-Shall provide two blue female USB 3.2 A connector used for USB 3.2 device ports.Provide 5V, 900 mA per USB 3.2 port.Shall support data transfer rates up to USB 10Gbps.Shall provide three black female USB 2.0 A connectors used for USB 2.0/1.x device ports.Provide 5V, 500 mA per USB 2.0/1.x port .Shall provide one (1) LAN port on rear panel for Ethernet control.Shall provide one (1) 3.5 mm, three-pole captive screw RS-232 connector on rear,HDMI to DisplayPort Converter support resolutions up to 4K/30 @ 4:4:4 with data rates up to 10.2 Gbps With Under table Mount form Same OEM .
1
-
-
... More
SITC of Cable Cubby with flip- open cover,CABLE ACCESS Pass through holes for AV cables
2
-
-
... More
SITC of 12 feet USB-C® 5 Gbps Optical Cables with 4K/30 Video and 60 W Power Delivery.
1
-
-
... More
SITC of Ultra Flexible Premium High Speed HDMI Cables,9' (2.7 m) 4K Premium,Supports ARC and CEC,
1
-
-
... More
SITC of 9 feet USB-A to USB-B 5 Gbps Cables,Delivers 4.5 watts of USB power ,Supports USB data rates up to 5 Gbps.
2
-
-
... More
SITC of Ultra Flexible Premium High Speed HDMI Cables,6' (1.8 m) 4K Premium,Supports ARC and CEC,
2
-
-
... More
SITC of 25 feet HDMI Premium High Speed Optical Cables - Plenum,Supports data rates up to 18 Gbps, video resolutions up to 4K/60 @ 4:4:4, and HDR,PCM 8-channel, Dolby© Digital, Dolby TrueHD, DTS-HD Master Audio support,Plenum, NEC CMP‑rated cable.
1
-
-
... More
SITC of USB 3.0 Active Extender Cable-25 ftDelivers 4.5 watts of USB power ,Supports USB data rates up to 5 Gbps.
1
-
-
... More
SITC of 3 feet DisplayPort 1.2 compliant Cable,4K/60 4:4:4 Verified,Supports resolutions to 4096x2160 @ 60 Hz,Supports data rates up to 21.6 Gbps.
1
-
-
... More
SITC of Loose cables Cables,Tie & Connectors etc
1
-
-
... More
PART- CCTV SURVEILLANCING
-
-
-
... More
SITC of Full HD H.265, 1/2.8” CMOS, 2MP Motorized Dome, 2.7-13.5mm, 50m IR, 120dB WDR, IVA, 256GB SD Card support, IP67/IK10.
8
-
-
... More
SITC of Full HD IR Bullet Camera H.265, 1/2.8” CMOS, 2MP Motorized Mini Bullet, 2.7-13.5mm, 70m IR, 120dB WDR, IVA, 256GB SD Card support, IP67/IK10.
6
-
-
... More
SITC of 32 IP Channels Network Video Recorder HRN-32081S-R. HOLIS Pro H.265+/H.265 Embedded RAID NVR, 32-ch, 2-Gig Ethernet, 8 HDD Bays, Upto 80TB. NVR. HRN-64081S-R. HOLIS Pro H.265+/H.265 Embedded RAID
1
-
-
... More
SITC of Storage disk for CCTV NVR for Surveillance.
1
-
-
... More
SITC of 43" Smart Android 4K UHD Professional Display, 440 nits Brightness, Smart Android OS, 4K UHD Resolution, 24*7, Screen Mirroring through, Airplay/Chromecast, Direct LED, 16 Gb storage, Wi-Fi, 178 Degree Viewing Angle, Landscape/Portrait/Tilt Installation, IP/RS232C Control, 10W+10W Speakers, 4 HDMI 2.1, 2 USB,Power Scheduling, 1200:1 Contrast Ratio, Color Gamut (DCI-P3) 92%, HDMI Auto Wake up. 4K HDR Visual Experience through 4K HDR Processor X1, 4K X-Reality PRO, Triluminos PRO, Motionflow XR, HDR10 / HLG / Dolby Vision etc all complete
1
-
-
... More
SITC of Category 6 UTP Cable - LSZH, High-Speed Gigabit Ethernet UTP 250 MHz Class E Cables for Cat 6 Consists of 23AWG Solid Bare Electrolytic Grade Copper Conductors, HDPE Insulated Twisted 4 Pair, RipCord, and LSZH Outer Jacket, Gigabit Ethernet (1000 Base-T), UL Listed, RoHS Certified in existing concealed/surface conduits / Raceways complete 305 Mtr. Roll, including Penta Scanning for per Copper connectitvity with other raleted testing and services (as per actual) as per specification etc. all complete
915
-
-
... More
SITC of Cat 6 UTP RJ45 Keystone Jacks / Outlets, Press-Fit technology, Compatible with EN 50173 / ISO IEC 11801, Qualified Screened Class 6 Component, Permanent Link & Channel ANSI/TIA-568-2.D complete (as per actual) as per specification etc. all complete
14
-
-
... More
SITC of Sinlge Network Faceplates including labels and mounting screws, Provision for accepting any Keystone Style RJ45 Jacks, Provision for Both RJ45/RJ11 type, Built-in Dust Covers with back box (as per actual) as per specification etc. all complete
14
-
-
... More
SITC of 1 Meter 24 AWG LSZH Category 6U / UTP Patch Cord, Complies to ANSI/TIA-568.2-D, Stranded Bare Copper, High grade 50μm gold Plated RJ45 connecters, Channel Performance verified by ETL, UL Verified, RoHS Certified Standard as per specification etc. all complete
28
-
-
... More
SITC of Rack Mountable Patch Panel, 24 Cat 6 Loaded Ports, Copper Patch Panel, Straight, Unshielded, Durability (IDC Life) 200 termination cycles with in Built Wire Manager, Grounding Bolt included as per specification etc. all complete
1
-
-
... More
SITC of 15U (W 600mm / D 600mm) Close rack 19" Wall mount, Front Door S12C 19" / 15U, AC Distribution Box + H/W (5 Points of 5/15 AMP sockets - (Horizontal), 19" 1U Cable Manager PVC with duct fingers x 5, Fan housing unit 2 Fan POSN, Fans 90 CFM 230 VAC, Mounting Hardware (Pack of 10) x 5 as per specification etc. all complete
1
-
-
... More
PART- ELECTRICAL EQUIPMENTS (SITC Work)
-
-
-
... More
Supplying and fixing the BLDC Ceiling Fan. Powered by corded electric and operating at 28 Watts and 220 Volts, it ensures energy-efficient cooling. Featuring three blades, it provides effective airflow. Ideal for offices, kitchens, and bedrooms.
2
-
-
... More
Supplying and fixing the 5 Litre Instant Water Heater, designed for indoor installation with a wall-mounted style. Operating at 3000 Watts and 230 Volts, it delivers efficient heating performance. With a maximum operating pressure of 8 Bars, it ensures reliable water flow.
1
-
-
... More
Supplying and fixing a Hand Dryer for Bathroom, constructed from plastic material. Designed for wall mount installation in bathrooms. Lightweight and available in white or black finishes. Includes necessary hardware for easy installation.
2
-
-
... More
Supplying and fixing a Ceiling Mounted Exhaust Fan, designed for efficient ventilation in bathrooms and kitchens. Powered by electricity, operating at 19 Watts and 230 Volts, ensuring effective air circulation. it efficiently removes stale air and Odors from enclosed spaces. Ideal for maintaining fresh and comfortable environments.
5
-
-
... More
Supplying and fixing the Heavy-Duty Ceiling Mounted Exhaust, designed for robust ventilation in bathrooms and kitchens. it efficiently removes air pollutants and Odors. Powered by electricity with a wattage of 60 Watts, it ensures powerful operation. Equipped with a push-button switch for easy control. Mounting type is down rod mount, offering secure installation. Ideal for heavy-duty ventilation needs in residential and commercial spaces.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%