Chandigarh Industrial And Tourism Development Corporation Limited Tender

Group C

DSR item No.2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/ Isolator).

4 way (4 + 12), Double door

DSR Item No.2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole and neutral

DSR Item No.2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

DSR Item No.2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

DSR Item No.1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 Sq mm

3 x 2.5 Sq mm

DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm

25 mm

DSR Item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

3 pin 5/6 amp socket outlet

DSR item No.1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

DSR Item No. 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

DSR Item No.1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

DSR Item No.1.32Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

DSR Item No. 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

DSR Item No.1.33Supplying and fixing 3 pin, 5 A. ceiling rose on the existing junction box / wooden block including connections etc. as required.

Supply and Erection of 2.5” dia GI pipe B-Class pole 4.5 Mtr. long with canopy suitable size 2” dia GI Pipe. The pole shall be erected 1 Mtr. below ground level 6” in internal dia readymade RCC muff. The gap between the pole and the muff shall be filled with cement concrete 1:2:4. The cost includes all labour and material including carriage to the site of work. The make of G.I. pipe should be of Jindal / Hindustan and weight 6.71 Kg. per meter +/- 10%.

S/E of Cement Collar and Jn. Box at the base of the pole with the detailed specification as given below: Jn. Box Construction: S/E of Thermo Plastic cable Jn. Box IP-55 of size 200 x 160 x 98 minimum deep approximate with 4 nos. thermal block suitable for 1 No. incoming and 3 nos. outgoing cable. The terminal block shall be made of Hansel/ Wago/ Elmex/Siemens make and cable junction box of make Hansel/Legrand or its equivalent to IP55. The job includes all labour and petty material to required complete the job to the entire satisfaction of the E.I.C. of work. Cement Collar: The box shall be enclosed in a cement collar made from cement concrete 1:2:4 and outside dia. 12”. The collar shall be embedded in the ground upto 12” shall stand 9” above ground shall have 12” high MS box and 6” top over the box. The collar shall be provided with 2 Nos. DWC Pipes of 40mm dia. upto 60cm long to facilitate the entry of cables in the Jn. Box. The collar shall be plastered, properly finished and painted with 2 coats of snowcem of superior quality. The item includes other petty material to complete the job including new thimbles & making connections. The job includes all labour and petty material required to complete the job to the entire satisfaction of the E.I.C. of the work.

Supply and erection of steel tabular pole IS-410 SP-6 swaged and welded in three steps 7.5 Mtr. long weight 93 Kgs. with the following specifications: The pole shall have a sectional length of 4.5-1.5-1.5 Mtr. The outside dia and thickness shall be 114.3 x 5.40 mm, 88.9 x 4.85 mm and 76.1 x 3.25 mm. The circular base plate-10G more than over all dia of bottom of the pole duly welded shall be provided. The pole shall be erected 1.50 Mtr. below ground level in 8” internal dia ready made RCC muff 1 Mtr. in length. The gap between the pole and muff shall be filled with cement concrete 1:2:4. The cost includes all labour and material including carriage to the site of work.

S/E of High Power LED Flood light luminaries of Philips / Bajaj / Wipro / Keselec / LT / TRILUX / GE make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. Specification of LED fittings: A Total Lumens of the LED fitting Minimum 7700 lumen B Ingress Protection Level of fitting IP 65 or better C Body of fitting Extruded aluminium housing/ pressure die cast with toughen glass diffuser D Operating Voltage 140 V to 270 V, AC supply or better E Input Frequency 50 Hz + 1Hz F Power Factor Minimum 0.95 G Luminaries Efficacy 110 lm/w H Working /Operating Temperature 00 C to + 450 C or better I Color Temperature 54000 K to 65000 K J Electronic Driver K Driver Current Constant current less than 600 MA L Operating Voltage 140 V to 270 V, AC supply or better i) Surge protection 10 KV minimum ii) Efficiency ≥ 85% iii) Make of Driver Should of same make of luminaries. iv) Protection Shall have under voltage and over voltage protection v) Warranty of LED fitting including LED driver. 2 Years against manufacturing defect vi) Fixture Should comply with LM 79 test from NABL/UL lab. vii) LED Type / Make / Model Power CREE/ OSRAM/ NICHIA / Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance Complying with LM80 Test report from the original manufacturer. viii) Life of luminaries 50000 burning hours at 70% lumen maintenance

S/E of 1’x1’ LED fitting surface type with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj / LT / Trilux make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. Specification of LED fittings: A. Wattage of LED fittings As per following parameters B. Total lumens of the LED fittings Minimum 1500 lumen D Body of fittings CRCA steel sheet with opal acrylic diffuser/ Extruded al. Housing CRCA front frame opal diffuser/ CRCA power coated housing with high efficiency translucent diffuser. E Operating voltage 140 V to 270 V, AC supply or better. F Input frequency 50 Hz + 1 Hz G Power factor Minimum 0.95 H Luminaire efficacy 100 lm/w I Color rendering index CRI shall be 80 (minimum) J Working/ operating temperature 00 to + 450c or better K Color temperature 60000K to 65000K L Electronic Driver i) Drive current (LED) As per OEM. ii) Operating voltage 140 V to 270 V AC supply or better iii) Type of driver Constant current output driver iv) THD Less than 10% v) Surge Protection 5 KV minimum vi) Efficiency Driver 85% vii) Protection Shall have under voltage and over voltage protection. M Warranty of LED fittings including LED driver 2 years against manufacturing defect. N Fixture Should comply with LM 79 test from NANL/UL lab. O LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. P Life of LED 50000 burning hours at 70% lumen maintenance

Supply and Laying of following PVC insulated and PVC sheathed Aluminium Cond. Arm. power cable working voltage upto 1100 Volt. grade of following size to be laid direct in ground below 1 Mtr. ground level including excavation, sand, cushioning and refilling the trench etc. as required. The job include the cost of making connections with suitable size of Al. Lugs / thimbles, testing, commissioning etc. as required to the entire satisfaction of EIC.

Size 16 Sq.mm 4 core PVC Al. Arm. Cond. Cable

S/E of AC ceiling fans with copper winding but without regulator complete with MS blades, plastic canopies 2 Nos. double ball bearing, MS hanging rods (As per site requirement), condenser, reels, clamps etc. The body of fan and blades should be white in colour. The job includes the cost of making necessary connections from the adjacent light point with 1.5mm2 single core copper conductor cable and 3mm thick white B.L. sheet cover for fan box of suitable size. The sample of fans shall be got approved from the SDE in-charge of work before installation at site. The job also includes the cost of carriage, erection, testing, commissioning of fan, all labour and petty material required to complete the job to the entire satisfaction of the SDE-in-Charge.

Size 48” 1200mm sweep ceiling fan of Havells make Velocity White / Orient make New Breeze / Crompton Greaves make Standard- High Breeze / Bajaj make Ultima only.

Supply & erection of size 600 mm (24”) sweep wall mounted heavy duty double ball bearing Air Circulator fan of Almonard make or its equivalent Crompton / Bajaj / Havell’s / Khaitan etc. oscillating type complete with blades with sturdy close mess guard etc. The fan shall have 1440-RPM speed. The fan shall be noiseless. The cost includes connection with adjacent light points and fixed on the wall / pillar with suitable size of steel rawl plugs, bolts and other petty material reqd. to complete the job to the satisfaction of Engineer-in-charge of work.

S/E of 1x18/20Watt. 4’ long LED box type fittings made of CRCA Sheet with tube rods to be installed on existing surface with the help of rawl plug & Screws etc. The tube rod should be of Philips/ Wipro/ Bajaj/ LT / Trilux / Twinkle make of polycarbonate material only. The batten for hosing the tube rod should be of Philips/ Wipro/ Bajaj/ LT / Trilux / Twinkle make only. The job includes carriage, erection, making connections with 3x1.5 sq.mm. copper wire from adjacent light point, testing and commissioning of the fittings etc. as required to complete the same to the entire satisfaction of Engineer In Charge. Specification of LED fittings: A. Wattage of LED fittings As per following parameter. B. Total lumens of the LED fittings Minimum 1800 lumen D Diffuser Extrusion Aluminium heat sink with Polycarbonate diffuser. E Operating voltage 140 V to 270 V, AC supply or better. F Input frequency 50 Hz + 1 Hz G Power factor Minimum 0.95 H Luminaire efficacy 100 lm/w I Color rendering index CRI shall be greater than 80 J Working/ operating temperature 00 to + 450c or better K Color temperature 60000K to 65000K L Electronic Driver i) Drive current (LED) As per OEM. ii) Operating voltage 140 V to 270 V AC supply or better iii) Type of driver Constant current output driver iv) THD Less than 10% v) Surge Protection 5 KV minimum vi) Efficiency Driver 85% vii) Protection Shall have under voltage and over voltage protection. M Warranty of LED fittings including LED driver 2 years against manufacturing defect. N Fixture Should comply with LM 79 test from NABL/UL lab. O LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 30,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. P Life of LED 30000 burning hours at 70% lumen maintenance

Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of Engineer In Charge.

Size 12” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make HDEF EXHD 300-6-1 / Bajaj make Supreme DLX only.

Size 15” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make HDEF EXHD 380-6-1 / Bajaj make Supreme DLX only.

Supply and erection of 14 GMS sheet frame of suitable size for erection of exhaust fan. The hole should be suitable required size for exhaust fan shall be cut from the Centre of the sheet duly fixed on existing M.S. glazing/ ventilator. The Exhaust fan frame shall be painted on both sides with superior quality paint after one coat of primer. The job includes the cost of 2 Nos. M.S. strips of 25 x 6mm for proper holding the Exh. fan and other petty material required to complete the job to the entire satisfaction of Engineer In Charge.

Suitable for 12” / 15” / 18” Exhaust Fan.

Supply and Laying of 10 Sq. mm 2 Core PVC insulated and PVC sheathed Aluminium Cond. Arm. power cable working voltage upto 1100 Volt. grade to be laid direct on surface with the help of clamp. The job include the cost of making connections with suitable size of Al. Lugs / thimbles, testing, commissioning etc. as required to the entire satisfaction of EIC.

S/E of Thermo Plastic cable Jn. Box IP55 of size 200x160x98 minimum deep approximate with 4 nos. thermal block suitable for 1 no. incoming and 3 nos. outgoing cable. The terminal block shall be made of Hansel make K-9105 with terminal link or its equivalent make Wago / Elmex / Siemens only and cable junction box of make Hansel/Legrand or its equivalent to IP55. The job includes all labour and petty material to required complete the job to the entire satisfaction of the E.I.C. of work.

Supply and Erection of LED Post Top Lantern fittings made of cast alum. housing with power to be mounted on directly on inbuilt Heat sinks. A UV stabilized PC/PMMA diffuser is provided for Glare Free Lighting with high visual comfort to complete with Electronic LED Driver Power supply & related accessories with the following specifications to be installed on existing pole. The fitting should be of Twinkle make LUX-PT-155 A (40 W) GENIUS (R) LED or its equivalent make Philips Wipro / Bajaj only (with subject to the condition of approval of EIC of Work). Specifications of LED fittings: A Ingress Protection Level of fitting IP 65 or better B Body of fitting Pressure Die cast aluminium with poly methyl methacrylate (PMM) diffuser C Operating Voltage 140 V to 270 V, AC supply or better D Input Frequency 50 Hz + 1Hz E Power Factor Minimum 0.95 F Working /Operating Temperature 00 C to + 450 C or better G Colour Temperature 27000 K to 32000 K H Electronic Driver I Driver Current Constant current less than 600 MA J Operating Voltage 140 V to 270 V, AC supply or better i) Surge protection 10 KV minimum ii) Efficiency ≥ 85% iii) Make of Driver Should of same make of luminaries. iv) Protection Shall have under voltage and over voltage protection v) Warranty of LED fitting including LED driver. 2 Years against manufacturing defect vi) LED Type / Make / Model Power CREE/ OSRAM/ NICHIA / Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance Complying with LM80 Test report from the original manufacturer. vii) Life of luminaries 50000 burning hours

Providing and fixing following rating MCCB 4 pole 415 Volt (Thermal magnetic / microprocessor release) without MS enclosure for Over load and short circuit protection, 36-55 KA Breaking capacity (Ics=100% Icu) with positive isolation. The overload release shall be of Adjustable Type suitable for Isolation. The MCCB is to be installed in existing cubicle panel / angle iron board including drilling holes in cubicle panel / angle iron board, making connections with suitable rating of copper wire / copper strip etc. as required. The job includes the cost of spreaders terminal links etc. as required.

125 Amp 4 Pole MCCB (Thermal Magnetic release). The MCCB should be of L&T / Siemens / Schneider / ABB make only.

S/E of enclosure for MCCB 63/100/125 Amp 3 Pole / 4 pole made out of 16 Gauge M.S. sheet. The enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of EIC.

Supply and erection of sheet metal bus-bar chamber on existing surface with required No. of bus-bar strips of suitable length and cross-sectional area, made of copper strips of suitable length and cross-sectional area enclosure made of M.S. sheet 1.6mm thick with detachable cover fitted with dust excluding gasket and secured with sufficient No. of cadmium plated iron screws and of given overall dimensions and to be fixed with G.I. bolts and nuts/Rag bolts and nuts etc., complete with all accessories including connections with suitable size tin coated copper thimbles, bonding to the existing earth and painting etc. as desired by the Engineer-in-charge.

Sheet metal bus-bar chamber suitable for 100 Amp. 415 Volts capacity with 4 copper strip Bus-bars suitable length 600mm & cross-sectional area (25.4mmx3.17mm) enclosure having overall dimension 680mm x 400mm x 150mm Nominal.

Supply & Erection of 63Amp. MCB TPN ‘C’ Series in existing enclosure including making connection etc. to complete the job to the entire satisfaction of EIC. The MCB should be of Legrand / Hager / Schneider / Havells / L&T make only.

Supply and Erection of B.L. Holder of make Anchor Panta / Havells Reo/ Gold Medal Essenza ISI marked on existing Jn. Box / Wooden block including making connection etc as required.

S/E of 2’x2’ LED fitting surface type with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj / LT / Trilux make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. Specification of LED fittings: A. Wattage of LED fittings As per following parameters B. Total lumens of the LED fittings Minimum 3300 lumen D Body of fittings CRCA steel sheet with opal acrylic diffuser/ Extruded al. Housing CRCA front frame opal diffuser/ CRCA power coated housing with high efficiency translucent diffuser. E Operating voltage 140 V to 270 V, AC supply or better. F Input frequency 50 Hz + 1 Hz G Power factor Minimum 0.95 H Luminaire efficacy 100 lm/w I Color rendering index CRI shall be 80 (minimum) J Working/ operating temperature 00 to + 450c or better K Color temperature 60000K to 65000K L Electronic Driver i) Drive current (LED) As per OEM. ii) Operating voltage 140 V to 270 V AC supply or better iii) Type of driver Constant current output driver iv) THD Less than 10% v) Surge Protection 5 KV minimum vi) Efficiency Driver 85% vii) Protection Shall have under voltage and over voltage protection. M Warranty of LED fittings including LED driver 2 years against manufacturing defect. N Fixture Should comply with LM 79 test from NABL/UL lab. O LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. P Life of LED 50000 burning hours at 70% lumen maintenance

Supply & erection of Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 Nos. of pull cord switches, one for oscillation and one for speed regulation. The fan should be of Havells make Swing / Crompton greaves make WM Wind FIO (HiSpeed) / Orient make 400 mm (16") Wall-45 only. The cost includes the connection with adjacent light points and installed on wall with suitable size rag bolts, nuts and other material required to complete the job to the entire satisfaction of Engineer-in-Charge.

S/E of Highway LED luminaries of Philips / Bajaj / Wipro / Keselec / LT / TRILUX / GE make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. Specification of LED fittings: A Total Lumens of the LED fitting Minimum 7000 lumen B Ingress Protection Level of fitting IP 65 or better C Body of fitting Extruded aluminium housing/ pressure die cast with toughen glass diffuser D Operating Voltage 140 V to 270 V, AC supply or better E Input Frequency 50 Hz + 1Hz F Power Factor Minimum 0.95 G Luminaries Efficacy 100 lm/w H Working /Operating Temperature 00 C to + 450 C or better I Color Temperature 54000 K to 65000 K J Electronic Driver K Driver Current Constant current less than 600 MA L Operating Voltage 140 V to 270 V, AC supply or better i) Surge protection 10 KV minimum ii) Efficiency ≥ 85% iii) Make of Driver Should of same make of luminaries. iv) Protection Shall have under voltage and over voltage protection v) Warranty of LED fitting including LED driver. 2 Years against manufacturing defect vi) Fixture Should comply with LM 79 test from NABL/UL lab. vii) LED Type / Make / Model Power CREE/ OSRAM/ NICHIA / Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance Complying with LM80 Test report from the original manufacturer. viii) Life of luminaries 50000 burning hours at 70% lumen maintenance

Supply & erection of sheet metal distribution board of suitable size of required number of ways for mounting Miniature Circuit Breaker/ Isolators including connection & bonding to the existing earth etc. as required to the entire satisfaction of EIC.

Sheet metal SP & N Distribution board (dust protected) provided with din bar suitable for incorporating MCB’s/Isolator 3 Way / 4 Way.