Chandigarh Administration Tender

Providing and fixing 24" deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet.0.8mm MICA inside cabinet. The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and Fixing 35mm thick 2nd class teak wood (kiln seasoned) panel door shutter consisting of 100mm x 35 mm style and top rail 150 mm x 35 mm lock rail 200mm x 35 mm bottom rail, teak wood (kiln seasoned) beading, with necessary 4 Nos. of hinges, S.S Tower bolts, S.S. Handles 5”, sliding bolt including 12mm thick commercial ply and complete fixed in position including spirit polish complete in all respect to the entire satisfaction of Engineer-in-Charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars

Providing and fixing 6mm thick Suede Finish NewMika, Greenlam,, Trepsa NMFX(High Pressure Laminates) made up of desirable in size and manufactured under EN438-2&3:2005 standard .NMFX should be in Double Layer UV Protection process under high pressure, thermosetting Phenolic resign treated Exclusive & Certified Exterior Grade Decorative paper (UV Resistant) on both side with high grade Kraft paper in between. Both the decorative and Kraft paper to be made of Virgin Pulp. Clad should be resistance to water immersion characterstic with permissible increase on thickness and mass 0.60% and have density 1.35G/cm3, UV resistance on Grey scale measurement will be measured ≥ 3, with flame retardant fulfilled the criteria of under EN13501-1:2007 with classification of BS1D0 standard property, Moisture resistant, Impact resistant, termite resistant, Scratch resistant, Weather and climatic shock resistant high pressure thermosetting resign treated balanced compact laminates Clad. (The manufacturer should provide 10 years warranty certification on manufacturing and moisture related defects).A Green product with Green Guard Gold certification where the VOC emission level is less than 0.22 PPM. Anti-bacterial and Anti-Fungal property under JIS Z2801:2000. NMFX will be installed on Aluminum tubes at 400/ 500 mm c/c distance with L brackets. There will be special fixing treatment on all the corners sections. Aluminum box size will be 25mmx50mm or desirable sizes. Boards will be fixed on the Aluminum Channels with colour match rivets . Approved shade will be finalized under direction of Engineer –in-charge.

Providing and fixing 8mm thick wooden laminated floor (Make PERGO/ ACTION TEESA) class of use 31/23 having wear resistance level of AC-3 as per EN-13329 with a direct pressure laminate surface including profile, treated with aluminium side, flooring of approved colour and shade complete in all respects and to the entire satisfaction of the Engineer in charge.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 300 x 600mm

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

French spirit polishing : One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm).