Chandigarh Administration Tender

Group C

DSR ITEM NO.1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.

3 x 1.5 sq.mm

3 x 2.5 sq.mm

DSR item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25mm dia.

DSR 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Telephone socket outlet

Bell push

DSR Item No.1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module (200mmX75mm)

3 Module (100mmX75mm)

1 or 2 Module (75mmX75mm)

DSR 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

DSR 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supply and fixing of 12 modules (200 mm x 150 mm) G.I box suitable for accommodate the following accessories along with modular base and cover plate for modular switches in recess / surface etc as required for Computer Point with 4 Nos. 5/6 Amp. modular switch and 4 Nos. 3 pin 5/6 Amp. modular socket outlet. The job includes the cost of making interconnections with suitable copper wire, painting of box with approved paint and other petty material required to complete the job to the entire satisfaction of Engineer-in-Charge at site.

Supply & erection of U PVC trunking 100 mm x 50mm with cover of AKG/MK/Legrand make. The PVC trunking should be fixed on the existing surface with the help of suitable size of steel fasners at each 1 mtr. distance to hold the same properly . The rate include cost of material , carriage eraction charges & petty material i.e. screws/ washers etc. to complete the job.

U PVC Trunking 100 mm x 50 mm.

End cap 100 mm x50 mm

DSR 19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply & erection of Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 Nos. of pull cord switches, one for oscillation and one for speed regulation. The fan should be of Havells make Swing Gyro/ Orient make Industrial heavy duty/Usha make Turbo HDEF/ Bajaj make Esteem only. The cost includes the connection with adjacent light points and installed on wall with suitable size rag bolts, nuts and other material required to complete the job to the entire satisfaction of Engineer-in-Charge.

S/E of fresh air fan high speed motor with copper would 10” sweep with louver and plastic body complete with speed motor, blades, epoxy powder coated of Havells make Ventil Air DX HS/ Orient make ventilator/ Crompton make Brisk Air/ Usha Crisp air/ Bajaj Supreme maxima DXI only. The cost includes the connection with adjacent light points and installed on wall with suitable arrangement by providing frame of required size made out 6mm thick water proof plywood to be installed with suitable size rag bolts, nuts after making suitable size hole in the wall if required at site to the entire satisfaction of Engineer-in-charge.

S/E of 1x18/20 LED box type 4’ long fittings made of CRCA Sheet. The fittings should be installed on existing surface. The tube rod and batten for housing the same should be of Philips / Wipro / Bajaj / Havells / Crompton / Jaquar / Surya / Panasonic/ Trilux/ LT only. The job includes carriage, erection, making connections testing and commissioning of the fittings as required to the entire satisfaction of engineer in charge. (As per complete item no. 14 of the DNIT)

Supply & Erection of 9/10 Watt, approx. 2’ Feet Long, surface mounted LED Batten type fitting to be installed on existing surface as required at site complete with connection etc. The LED Batten Fixture should be of Philips / Wipro / Bajaj / Havells / Crompton / Jaquar / Surya / Panasonic/ Trilux/ LT make only. The job includes all labour & petty material required to complete the job in entire satisfaction of Engineer-in-Charge. (As per complete item no. 15 of the DNIT)

S/E of 2’x2’ LED fitting in Recess type with integral/ non integral driver to be installed in the existing false ceiling with 4 Nos. steel chain. The fittings should be installed at site with suitable arrangement and the cost includes of 4 nos. MS chain of suitable size and length for support of fittings. The fitting should be Philips / Wipro / Bajaj / Havells / Crompton / Jaquar / Surya / Panasonic/ Trilux/ LT make only. The job includes the cost of cutting of existing false ceiling of suitable size for erection of fitting with suitable arrangement etc. as required at site. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. The LED fittings should be as per following design criteria.(As per complete item no. 16 of the DNIT)

S/E of 1’x 4’ LED fitting in Recess type with integral/ non integral driver to be installed in the existing false ceiling with 4 Nos. steel chain. The fittings should be installed at site with suitable arrangement and the cost includes of 4 nos. MS chain of suitable size and length for support of fittings. The fitting should be Philips / Wipro / Bajaj / Havells / Crompton / Jaquar / Surya / Panasonic/ Trilux/ LT make only. The job includes the cost of cutting of existing false ceiling of suitable size for erection of fitting with suitable arrangement etc. as required at site. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer In Charge. The LED fittings should be as per following design criteria.(As per complete item no. 17 of the DNIT)

S/E of Recess Type, 15 Watt, LED Down Lighter (Round) complete in all respect. The Down Lighter should be of Philips/ Wipro/ Bajaj/ Lighting Technology/ Trilux/ Havells/ Surya/ Jaquar/ Panasonic/ Crompton/ Twinkle make only. The job includes the cost of cutting of existing false ceiling in toilets of suitable size for installation of fitting as required at site. The job includes the cost of testing, commissioning and making connection with 3 x 1.5 sq. mm. copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-Charge. (As per complete item no. 18 of the DNIT)