Chandigarh Administration Tender

3 x 1.5 sq. mm

3 x 2.5 sq. mm

DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm

25 mm

DSR 1.23 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A. socket outlet

DSR item No.1.29 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

DSR item No.1.30 Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

DSR 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

DSR 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Triple Pole and Neutral

DSR Item No.5.1 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.

DSR item No.5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.

Size 15 inch (375mm) Sweep, 900 RPM Heavy Duty Exhaust fan (Single Phase) with louver of Havells (Turbo Force SP) / Orient (Industrial Heavy Duty)/ Usha (Turbo HDEF)/ Crompton (EXHD300-6-1)/ Bajaj (Supreme Plus) make only.

Supply, Installation, Testing and Commissioning of 1400 mm sweep (Maximum wattage upto 35W), BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 7.42, Air delivery minimum 245 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, complete with OEM designed electronic regulator unit for speed control in various steps as per BIS (proof shall be submitted alongwith fan before installation at site) and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. The fan should be of Havells/ Atomberg / Bajaj/ Crompton make only.

Supply & erection of Wall Fan 400mm sweep oscillating type complete with blades with regulator. The fan should be of Havells (Swing)/ Usha (MAXX AIR)/ Orient (400mm Wall44)/ Crompton (WM Hiflo wave)/ Bajaj (Esteem Double String) make only. The wall fan should be provided with double string i.e. one no. controlling oscillating and one for speed. The cost including connection with adjacent light points with the help of suitable rating copper wire.

S/E of LED box type fittings made of CRCA Sheet with 1 No. LED tube rod. The fittings should be installed on surface with the help of rawl plug and screws etc. The LED tube rod and batten for housing the same should be of Philips/ Wipro/ Bajaj/ Havells/ Crompton/ Trilux/ Lighting Technologies/ Panasonic only. The job includes the cost of testing, commissioning and making connection with 3 x 1.5 Sq.mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.14)

S/E of LED box type fittings made of CRCA Sheet with 2 Nos. LED tube rod. The fittings should be installed on surface with the help of rawl plug and screws etc. The LED tube rod and batten for housing the same should be of Philips/ Wipro/ Bajaj/ Havells/ Crompton/ Trilux/ Lighting Technologies/ Panasonic only. The job includes the cost of testing, commissioning and making connection with 3 x 1.5 Sq.mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.15)

S/E of LED street light fittings luminaries of Philips / Bajaj / Wipro/ Surya/ Crompton/ Havells/ Panasonic/Jaquar / Lighting Technologies/ Trilux make only. The fitting should be installed on wall/ existing pole upto 16 Mtr. Long with the help of hydraulic ladder / Crain with bucket which shall be arranged by the firm at his own cost. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq.mm copper wire from existing Junction box, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.16)

S/E of GI pipe bracket of 32mm dia. welded with nipple for erection of existing street light fittings to be installed on wall with suitable size of rag bolts and MS clamps made out of 25mmx5mm thick MS flat with all labour and material. The bracket shall be made by GI pipe of 32mm dia (Medium Class) 3’ long with an angle of inclination 105 degree as required. The job includes the cost of petty material required to complete the job to the entire satisfaction of Engineer in Charge.