Chandigarh Administration Tender

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.3 Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 11.26.1 25 mm thick

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 11.46.2 Size of Tile 600x600 mm

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 12.21.1 In 75x75 mm deep chase

12 mm cement plaster of mix : 13.1.1 1:4 (1 cement: 4 fine sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1 1:4 (1 cement: 4 fine sand)

Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): 13.32.1 Flush/ Ruled/ Struck or weathered pointing

Regrading terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with newones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing water proofing treatment by laying one coat of cement adhesive Tapecrete mixed with cement in ratio 1:3 (One part of tapecrete : 2 part of cement) complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing 35mm thick golden champ wood (kiln seasoned) glazed window shutters consisting of vertical and horizontal styles 75x35mm size with 4mm thick floated glass pane fixed with 1/2"x3/4" golden champ wood (kiln seasoned) beading. The rate further includes the cost of 3" butt hinges Aluminium tower bolts 4", Aluminium handles 2 nos. I-hook and two coats of special quality enamel paint over coat of primer after preparation of surface (special quality) and removal of old shutter complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing cup board shutter consisting of 19mm thick commercial board (Archid, Novapan, Kitply, National make) phenol bonded fixed including cost of necessary fitting, screws, nails, fevicol and two coats of special quality paint over one coat of primer after preparation of ply wood surface complete in all respect to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S.Angle iron farme of size 5'-4 1/2" x2'-5" (for fixing of I.R.C. fabric) having outer frame made out of angle iron of size 40x40x6 mm with M.S. Flat 20x3 as beading to hold the IRC fabric in position.The M.S.Frame is welded to box type vertical post with two no M.S. ring of 3" dia madeout of M.S. flat 40x5mm .The vertical box post of 3'-4.5" long made out with 2 no M.S.angle iron of Size 40x40x6mm welded to each other having 6" long hold fast of the same material at bottom are grouted on the top of boundary wall in PCC 1:2:4 of size 9"x9"x9" after making recess in existing boundary wall at the distance of 6'centre to centre.4" long M.S.pieces having sharpended edged madeout of M.S. flat 40x5 mm are welded to the top member of the frame @ 3: c/c. It also includes the cost of two coats of first quality black paint (of duly approved brand) over one coat of steel primer as per Drg.First No. 309 Job No. M-16 complete in all respect to the entire satisfaction of Engineer-in-Charge.

Providing & fixing IRC fabric 3''x1'' of 12 gauge over existing M.S angle- Iron frame with electric flash welding including painting two coats over one coat of steel primer complete in all respect to the entire satisfaction of Engineer-In-Charge.

P/F 100mm internal dia PVC pipe as rain water pipe on walls of 6 kg. /sqm. pressure with Bend, Elbow and Clamps complete in all respect to the entire satisfaction of Engineer--in-Charge