Chandigarh Administration Tender

Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge.

Providing and fixing 8mm thick wooden laminated floor class of use 31/23 having wear resistance level of AC-3 as per EN-13329 with a direct pressure laminate surface including profile, treated with aluminium side, flooring of approved colour and shade complete in all respects and to the entire satisfaction of the Engineer in charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing profile for the flooring fixed at the ends of the flooring completely to the entire satisfaction of the Engineer in charge.

Providing and fixing wooden cabinet of 13½” deep and 2’-0" height with open able shutter at wall above 4’-9" height consisting of 19mm thick with commercial plyboard (ISI marked) lipped with teak wood lipping of 19mm x 6mm on exposed edges include cost of nail, screws, auto hinges, synthetic adhesive etc. The front shutter and sides are to be furnished with 1mm thick ISI marked superior quality mica of approved shade and inner side of the cabinet with 0.8mm thick mica of approved shade fixed in position with help of wooden gutties at wall complete in al respect to the entire satisfaction of Engineer in charge.

Providing and fixing of kitchen cabinet below working shelves made out with 19mm thick commercial ISI marked plyboard and front portion of the cabinet furnished with 1mm thick superior quality sun mica of outer side and 0.8mm thick sun mica inner side of the cabinet for fixing the kitchen accessories and jack at bottom synthetic enamel paint over remaining portion. It is also include the cost of sprit polishing on the edge of the lipping cost of stainless steel handle, adhesive, nail, screws etc. complete fixed in position to the entire satisfaction of Engineer-in-Charge.

Providing and fixing heavy duty S.S. kitchen accessories fixing in the existing cabinet with help of best quality telescopic channel. The detail of size as under: Basket of size 21”, 20”, 4”

Basket of size 21”, 20”, 6”

Cutlery basket 17”, 20”, 4”

Basket of size 17”, 20”, 4”

Basket of size 17”, 20”, 6”

Basket of size 17”, 20”, 8”

Grain trolley of size 21”, 20”

Vegetable basket 17”, 20”, 6”

Plate basket 17”, 20”, 8”

Cup Saucer basket 17”, 20”, 8”

Hydraulic auto hinges

Corner basket 21” deep

Masala Pull out 6"

Providing and fixing 28mm thick wooden or stainless steel mettalic drapery pipe including s.s. brackets etc. complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making drawers in bottom . The rate further includes the cost of telescopic channel for drawers, lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge.

Providing & fixing P.O.P. false ceiling at all heights including poroviding & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sq, (both side inclusive) as per IS 277 and consisting of angle cleat of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm clc, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers or 25 x 10 x 0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c'c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mn each having lips of 10.5mm, at 450mm cIc, shall be fixed in a direction perpendicular to G.I ntermediate channel with connecting cip made out of 2.64mm dia x 230mm long G.I wire at every junction, including perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws 230mm interval, including laying of P.O.P. ceiling of average thickness 12 to 14mm reinforced with chicken mesh with ceiling sections including the cost of making opening for light fittings/concealed lighting, sound speakers, making suspended acoustical clouds, space for Curtains/ blinds, grills, diffusers, cut outs made with frame of perimeter channels etc suitably fixed by giving required offsets, excluding the cost of painting all complete as per , specificaton and direction of the Engineer in charge.

Providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.