Chandigarh Administration Tender

Providing and fixing M.S. Flat iron railing panel of 9'-10 ½" long and 6'-9" high ( 4'-9" above ground level and 2'-0" in ground) consisting of 2 No. vertical member made out of M.S. channel 130 x 65 x 6mm with 0'-9" long anchorage piece welded at bottom embedded in cement concrete block 1:2:4 of size 1'-6"x1'-6"x2'-0" in ground. The frame of railing consist of 2 Nos. top & bottom horizontal member as MS angle 65mmx65mmx6mm. The railing panel having vertical members of MS flat 50 mm x 6mm of 4'-4" height @ 6 ¼" & 3" spacing alternately as per Architect Drawing No. 263/2 Job No. 772 and 7 ½" high vertical spikes and @ 6 ¼" long horizontal members at top and bottom in between vertical members. The rate further including the cost of 2 Nos. 12mm dia nut, bolt and washers with 3" long sleeve of G.I. pipe 19mm dia for fixing of vertical members of railing panel to each other above the ground level, finished with two coats paint over one coat of metal primer (special quality) complete in all respects as per C.A. Drawing no. 263/2 Job no. 772.

Providing and fixing M.S. Channel Bollard 4'-3" long (2'-9" above ground level and 1'-6" below ground) 2 Nos. of ISMC:125 welded together making box of size 130mm x 125mm and at the top covered with 3mm thick M.S. sheet of size 130mm x 125mm, M.S. flat 50 x 6mm anchorage piece of 9" long welded at bottom and whole box inside filled with C.C. 1:2:4 and out side painted with 2 coat of approved quality of paint over one coat of primer and the post embended in C.C. 1:2:4 of block size 1' x 1' x 1'-6" in the ground complete in all respect and to the entire satisfaction of Engineer-in-charge. N.S.