Chandigarh Administration Tender

Dismantling of existing rubber moulded cement concere pavers & stacking the same at site carefully complete in all repect and to the entire satisfication of Engineer-in-charge. N.S.

Dismantling of existing Kerbs stacking the serviceable kerbs properly at site and disposal of the unserviceable kerbs average lead of 100 rft. N.S.

Dismantling of existing Channels stacking the serviceable channels properly at site and disposal of the unserviceable channels average lead of 100 rft. N.S.

Refixing of dismantled PCC Kerb with cement mortar 1:2 complete n all respects and to the entire satisfaction of the Engineer in Charge. N.S

Refixing of dismantled PCC Channel with cement mortar 1:2 complete in all respects and to the entire satisfaction of the Engineer in Charge. N.S.

Refixing of cement concrete pavers block including 25mm layer of screened sand to the required slope complete in all respect and to the entire satisfaction of Engineer-in-charge. N.S.

Providing and fixing of factory manufactured precast cement concrete kerb of size 300mm x 300mm having 100mm thickness and 50mmx50mm half round at top duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge. N.S.

Providing and fixing of factory manufactured precast concrete channel of size 300mm x 300mm having 75mm thickness duly vibrated mechanically and compacted made of P.C.C 1:2:4 duly cured and finished. The rate further include filling of joints between kerbs / channels with cement mortar 1:2 complete in all respect and to the entire satisfaction of Engineer-in-charge. N.S.

Providing, laying, spreading and compacting granular sub base material 150mm thick compacted of natural sand, morrum, gravel crushed stone or combination thereof as per MORT&H specification confirming to clause 401 coarse graded grading-III as per table 400-1 of MORT&H specification (5th edition), including spreading on the prepared sub grade with the help of tractor with planner of adequate capacity maintaining the requited slope and grade during operation, rolling with road roller 8-10 tone with the grade and cross fall (camber) to be checked and any high spot or depressing which becomes apparent, corrected by removing or adding fresh material, including cost of tools and plants, carriage of material from stacks, templates, barrier, lighting arrangement at night, chowkidar and maintenance of diversion etc. complete in all respect as per MORT&H specifications, density of GSB as laid 2 gms/cc complete in all respect and to the entire satisfaction of Engineer in charge. N.S.

Providing and fixing 60 mm thick ISI approved high density rubber moulded precast cement concrete paver blocks grey / coloured designer, polished, manufactured by vibro hydraulic pressure process consisting of design mix of cement, sand and fine aggregate having designation M-35 including best quality of colour and hardening agent. The pavers should be complied with tensile strength and breaking load as per BIS 6717-1993 and shall be tested against resistance to wear as per IS:1237-1980. The paver should be laid over a layer of 25 mm thick screened coarse sand to the required slope and filling the joints with fine sand etc. complete in all respect and to the entire satisfaction of Engineer-in-charge. N.S.