Chandigarh Administration Tender

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR No.5.22A

Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR No.5.22A.6

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.DSR No.8.2

Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. DSR No.8.2.1

Area of slab over 0.50 sqm. DSR No.8.2.1.2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 12" x 18" )DSR No.8.31

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge. DSR No.9.119

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. DSR No.9.120

30 mm thick plain PVC door shutters. DSR No.9.120.1

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. DSR No.11.41

Size of Tile 600x600 mm. DSR No.11.41.2

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. DSR No.11.46

Size of Tile 600x600 mm. DSR No.11.46.2

12 mm cement plaster of mix : DSR No.13.1

1:4 (1 cement: 4 fine sand) sqm. DSR No.13.1.1

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : DSR No.13.90

Old work (one or more coats) DSR No.13.90.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : DSR No.13.99

One or more coats on old work. DSR No.13.99.1

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (Qty. for One House) DSR No.13.111

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. DSR No.13.111.1

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. DSR No.15.2

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)DSR No.15.2.2

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.DSR No.15.3

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : DSR No.15.12

Of area 3 sq. metres and below. DSR No.15.12.1

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR No.15.56

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.DSR No.15.60

Providing and fixing Golden Champ chawkhats (kiln seasoned) including cost of straps iron holds fast hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chawkhats. Rate includes the cost of dismantling of all damages chawkhats and making and good the damaged to walls plaster and floors as required including disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats syn, paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

Size: 4 ½”x 2 ¼ ”

Providing and fixing 35mm thick Golden Champ wire gauge door shutter consisting of 100mm x 35mm style and top rail 150mm x 35mm lock rail 200mm x 35mm bottom rail wire mesh 22 x 12mm gauge fixed with 1/2" x 3/4” hollock wood beading 3nos 5” Nos hinges aluminium fitting and two nos handles 5” and 1 no tower bolt 8”, 6” and double rubber aluminium door stopper, Single action door spring. Complete fixed in position including the cost of two coats of special quality over one coat of wood primer. Complete in all respect to the entire satisfaction of Engineer-in-Charge. NS

Providing and fixing 35mm thick ISI marked flush door shutters with iron butt hinges (heavy weight)125x40x4mm and screws, conforming to IS: 2202 (Part I) non-decorative type, core of block board. The rate further rate includes the cost of aluminium fittings such as one no. 250x16mm sliding bolt, one no. 200x10mm and one no. 150x10mm tower bolt, two nos. 125mm size D-type handles and painting the shutter with two coats of special quality paint over one coat of primer including preparation of plywood surface for painting complete in all respects and to the entire satisfaction of Engineer-in-charges. NS

Providing and laying anti skid ceramic floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc, complete. NS

Providing and Fixing of Kitchen Cabinet below working shelves consisting of chowkhats frame of golden champ wood of 2" section with one additional member with suitable rebate of 1" 1/2" on outer side for shutter. The shutters are to be provided with 18mm thick both side pre-laminated particle board with one side decorative. Flat pressed 3 layer and graded (medium density), grade I-Type-II, conforming to IS 12823 (exterior grade) with hard wood lipping of size 18mm x 6mm all around and fixed with chowkhat frame with piano hinges and screws etc. and provide with handle and magnetic catcher. The complete frame is to be fixed with fastners. etc complete fixed in position to the entire satisfaction of Engineer in charge. NS

Providing and fixing wooden cabinet of above working shelf 13 1/2" deep and 2'-0" height with openable shutter at wall above 4'-9" height consisiting of 18mm thick both side pre-laminated board with one side decoractive flat pressed 3 layer and graded (medium density), grade I type II, conforming to IS 12823 (exterior grade) lipped with hard wood lipping of size 18mm on exposed edges include cost of piano hinges and handle, magnetic catcher, nail, screws, synthetic adhesive etc and fixed in position with help of fastners at wall complete in all respect to the entire satifaction of the engineer in charge. NS

Preparation of plastered or concrete surfaces for oil bound distemper or emulsion or apex paint including sand papering the surface or scrapping by patti, applying filling with cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

Making hole in granite shelves for gas pipe carefully without damage the shelves and granite complete in all respect and to entire satisfaction of Engineer-in-charge. NS

Providing and fixing Golden Champ chawkhats (kiln seasoned) including cost of straps iron holds fast hinges, screws, nails, fevicol etc. and painting two coats of wood preserver to sides of chawkhats. Rate includes the cost of dismantling of all damages chawkhats and making and good the damaged to walls plaster and floors as required including disposal of rubbish to the dumping ground the rate further includes the cost of painting two coats syn, paint over one coat of wood primer complete in all respect and to the entire satisfaction of Engineer-in-charge. NS

2 ½” x 2 ½”

Providing and fixing 19mm thick (Century, Nation, Green Ply, Kit Ply, Virgo) Commericial Board shutter in existing cup board, lipped with hard wood lipping of 19mm x 6mm on exposed edges including nail, screw and fevicol etc. the rate also included the cost of two coats of special quality over one coat of wooden primer after preparation of ply wood surfaces fixed in position complete in all respect to the entire satisfaction of Enginner in charge. NS