Chandigarh Administration Tender

Group-C

DSR Item No. 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

Bell push

DSR 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

DSR 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

4 Module (125 mm x 75 mm)

6 Module (200 mm x 75 mm)

8 Module (125 mm x 125 mm)

12 Module (200 mm x 150 mm)

DSR 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq.mm

3 x 2.5 sq.mm

DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25mm

DSR 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Triple Pole and neutral

Supplying and fixing suitable size GI box 6 Module (200mmX75mm) in recess/surface as required with modular plate and cover, including providing and fixing 1 No. 3 pin 5/6 A & 1 No. 6 pin 15/16 A modular socket outlet and 1 No. 5/6 A & 1 No. 15/16 A modular switch. The job includes the cost of making interconnections with suitable copper wire and other petty material required to complete the job to the entire satisfaction of Engineer-in-Charge at site. The Modular accessories should be of Goldmedal (Gifa)/ Lauritz Knudsen (Oris)/ ABB (Ivie)/ Legrand (Arteor)/ Crabtree (Athena) only.

Supply and fixing of 12 modules (200 mm x 150 mm) G.I box suitable for accommodate the following accessories along with modular base and cover plate for modular switches in recess/ surface etc as required for Computer Point with 4 Nos. 5/6 Amp. modular switch and 4 Nos. 3 pin 5/6 Amp. modular socket outlet. The job includes the cost of making interconnections with suitable copper wire, painting of box with approved paint and other petty material required to complete the job to the entire satisfaction of Engineer-in-Charge at site. The Modular accessories should be of Goldmedal (Gifa)/ Lauritz Knudsen (Oris)/ ABB (Ivie)/ Legrand (Arteor)/ Crabtree (Athena) only.

Supply, Installation, Testing and Commissioning of LED Down lighter, Square Shape, Surface Type with integral/ non integral driver to be installed on existing surface with the help of rawl plug & screws etc. The down lighter should be of Philips/ Wipro/ Bajaj/ Trilux/ Lighting Technologies/ Crompton/ Havells/ Panasonic/ Jaquar make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.11)

Supply, Installation, Testing and Commissioning of LED Down Lighter, Round Shape, Recess Type with integral/ non integral driver to be installed on existing false ceiling. The fitting should be Philips/ Wipro/ Bajaj/ Trilux/ Lighting Technologies/ Crompton/ Havells/ Panasonic/ Jaquar make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.12)

S/E of 2’x2’ Clean Room LED Fitting, Recess mounted bottom opening (IP-54) with intergral/ non integral driver to be installed on existing false ceiling with the help of steel chain, rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj/ Trilux/ Lighting Technologies/ Crompton/ Havells/ Panasonic only. The job includes the cost of testing, commissioning and making connection with 3 x 1.5 sq. mm copper wire from adjacent light point, other petty material and labour etc. as required at site to the entire satisfaction of Engineer in charge.(Please refer DNIT for complete specification of item no.13)

S/E of 2’x2’ LED Fitting, Recess Type with intergral/ non integral driver to be installed on existing false ceiling with the help of steel chain, rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj/ Trilux/ Lighting Technologies/ Crompton/ Havells/ Panasonic/ Jaquar make only. The job includes the cost of testing, commissioning and making connection with 3 x 1.5 Sq.mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.14)

Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, rigid frame with rubber mounting for silent operation, epoxy powder coating along with metallic louver to be installed in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of EIC.

Size 12 inches (300mm) Sweep, 900 RPM Heavy Duty Exhaust fan (Single Phase) with louver of Havells (Turbo Force SP) / Orient (Industrial Heavy Duty)/ Usha (Turbo HDEF)/ Crompton (EXHD300-6-1)/ Bajaj (Supreme Plus) make only.

Supply, Installation, Testing and Commissioning of 1400 mm sweep (Maximum wattage upto 35W), BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 7.42, Air delivery minimum 245 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, complete with OEM designed electronic regulator unit for speed control in various steps as per BIS (proof shall be submitted alongwith fan before installation at site) and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. The fan should be of Havells/ Atomberg / Bajaj/ Crompton make only.

Supply and laying of XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/ HUME/ METAL/ DWC pipe / on surface with the help of MS clamps of suitable size/ as required at site to the entire satsfaction of Engineer-in-Charge. The job includes labour charges of laying the cable and making connections with suitable size aluminum lugs/thimbles etc. The cable shall be of Polycab / Havells / R.R. Kabel/ KEI/ Finolex make only.

Size 95 sq.mm 3.5 core.

Providing and fixing following rating MCCB 4 pole 415 Volt (Thermal magnetic / microprocessor release) for Over load and short circuit protection, 36 KA Breaking capacity (Ics=100% Icu) with positive isolation. The overload & short circuit release shall be of adjustable type, suitable for isolation The MCCB is to be installed in existing cubicle panel / angle iron board/ VTPN BDB / MCCB enclosure including drilling holes in cubicle panel / angle iron board, making connections with suitable rating of copper wire / copper strip etc. as required. The job includes the cost of spreaders terminal links. The job also includes cost of MS enclosure or direct/ extended rotary handle etc. as required to complete the job to the entire satisfaction of Engineer-in-charge. The MCCB should be of Lauritz Knudsen/ Siemens/ Schneider/ Legrand/ ABB/ Hager make only.

100 Amp 4 Pole MCCB (Thermal Magnetic release).

400 Amp 4 Pole MCCB (Microprocessor release).

Supply & erection MCB Four Pole 63 Amp 415 Volt 10KA Breaking Capacity ‘C’ curve without enclosure. The job include the labour charges and other petty material required to complete the job. The MCB 4 pole should be of Lauritz Knudsen (Exora)/ Legrand (DX3)/ Hager (h3)/Schneider (Acti9)/ ABB (SB200M)/ Siemens (Betagard)make only

Fabrication, supplying, installation, testing and commissioning of Indoor type cubicle type fully enclosed compartmentalized electric panel of suitable size (300mm-900mm) deep as required as site suitable for three phase 50 Hz 415 volt AC supply system made out of 1.6 mm thick CRCA sheet duly strong thread with suitable size of MS channel members and base weather proof dust and vermin proof, ventilated with louvers at sides removable gland plates at the bottom, earthing studs at both ends duly painted with powder coated finish of approved shade and two coats of anticorrosion paint including providing and fixing of four strip main and auxiliary aluminium bus bars of rating min 400 amp., multifunction meter, LT phase indicator lamp for each incomer/ outgoing, MCB distribution board metering unit and having space for accommodating various MCCB’s, MCB SP, MCB TPN, Change over switch etc as per site requirement. The manufacturer/ fabricator of LT panel should posse’s type test certificate/ reports w.r.t. construction/ manufacturing of LT panel confirming to IS: 8623/93 with breaking capacity 50KA (minimum) & Degree of protection IP42 (minimum) from CPRI /ERDA approved Lab.

Supply, erection, testing and commissioning of Air curtains 3 feet long, 220 Volt, Air Volume: 1500 CFM (H), 1100 CFM (L), 2 Motor 3 Blowers, Anti Corrossion, MS/ SS Body to be installed on the existing wall/ surface. The job includes cost of all petty material required to complete the job to the entire satisfaction of Engineer-in-charge. Make:- NSC/ Chronovex/ AVRO only.