Chandigarh Administration Tender

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.10

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) DSR 5.1.2

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform DSR 5.9.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22.6

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2

Providing and laying anti skid vitrified floor tiles of Size 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm N.S

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) DSR 13.1.1

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. DSR 16.68

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR 12.41.2

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° 110 mm bend DSR 12.42.5.2

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionShoe (Plain) 110 mm Shoe DSR 12.42.6.2

Providing and fixing of porta cabinRoof Panels40/70mm Supply of 40/70mm thick PUF insulated Roof Panel with 0.50mm thick corrugated profile sheet from out side (RAL-9002) and micro ribbed 0.50mm thick PPGI (Make-JSW) inside (RAL-9002) with PUF Density 42± 5% Kg/m3 with proper overlapping and projections on all sides, CFC free & Ozone friendly.(Pentane Based) Make ACE Prefab UPVC Door Supply of UPVC door of size 3' x 7' with UPVC frame and PVC leaf complete accessories like handle, tower bolt etc.UPVC Windows Supply of UPVC two track sliding windows of size 3' x 4' with two glass sliding shutters complete in all respect using Rollers, EPDM Gaskets, Locking arrangements. Make-ACE Prefab Steel Structure Supply of prefabricated steel structure consist of main vertical columns, rafters, purlins and 1' raised floor frame with one coat of red oxide zinc chromate primer. Installation Installation of Roof panels with hardware and silicon sealant installation of Steel Structure. Make-ACE Prefab complete in all respect to the entire satisfaction of Engineer in charge N.S

Providing and fixing of Stylam HPL Sheet Thickness 6mm with hot coating to prevent from sun rays and suitable for alltype of exterior weather conditions, and installation charges for HPL Sheet to be installed over 2"x1" Aluminium channel with rivets all respect to the entire satisfaction of Engineer in charge N.S

Supplying and installation of moisture resistant/fire resistant cement board as per standard sizes fixed with self drilling / taping screws. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Cement Board 12 mm all respect to the entire satisfaction of Engineer in charge N.S

Providing and fixing of LaminatedWooden floor AC-4, Class of use 32as per EN13329. Top layer having TITAN X Surface. Plane size of 1200mm x 190mm x 8mm & having uniclic smart lock system. to be laid over a 2 mm thick layer of EP Form. and Readymade Door Profile. all respect to the entire satisfaction of Engineer in charge N.S

Supplying and installation of Wool Resin Bonded Fiberglass Insulation is made of fine, long, non-metallic, in-organic glass fibers. It possesses high insulation value by virtue of its low fiber diameter, better fiber distribution and superior homogeneous density as revealed by low thermal conductivity, meeting requirements of IS: 8183. all respect to the entire satisfaction of Engineer in charge N.S

Providing and fixing 12.5 mm thick gypsum fire resistant board conforming to IS: 2095- Part I in existing false ceiling at all height including jointing and finishing with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge N.S

Providing and fixing Metal Frame in floors complete fixed in position to the entire satisfaction of Engineer-in-charge N.S