Chandigarh Administration Tender

Group-C

DSR 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

4 Module (125 mm x 75 mm)

6 Module (200 mm x 75 mm)

8 Module (125 mm x 125 mm)

DSR Item No. 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

DSR 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

DSR Item No.1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

25mm

DSR 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq.mm

3 x 2.5 sq.mm

DSR 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supply, Installation, Testing and Commissioning of 1400 mm sweep (Maximum wattage upto 35W), BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 7.42, Air delivery minimum 245 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, complete with OEM designed electronic regulator unit for speed control in various steps as per BIS (proof shall be submitted alongwith fan before installation at site) and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. The fan should be of Havells/ Atomberg / Bajaj/ Crompton make only.

Supplying and fixing suitable size GI box 6 Module (200mmX75mm) in recess/surface as required with modular plate and cover, including providing and fixing 1 No. 3 pin 5/6 A & 1 No. 6 pin 15/16 A modular socket outlet and 1 No. 5/6 A & 1 No. 15/16 A modular switch. The job includes the cost of making interconnections with suitable copper wire and other petty material required to complete the job to the entire satisfaction of Engineer-in-Charge at site. The Modular accessories should be of Goldmedal (Gifa)/ Lauritz Knudsen (Englaze)/ ABB (Ivie)/ Legrand (Arteor)/ Crabtree (Athena)/ Norisys (Square Series) only.

Supply, Installation, Testing and Commissioning of LED Square type 1’X4’ surface type fitting with integral/ non integral driver to be installed on surface with the help of rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj/ Crompton/ Havells/ Trilux/ Panasonic/ Lighting Technologies make only. The job includes the cost of testing, commissioning and making connection with 3x1.5 sq. mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer in Charge..(Please refer DNIT for complete specification of item no.11)

S/E of 1’x4’ LED fitting recess type with intergral/ non integral driver to be installed on existing false ceiling with the help of steel chain, rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj/ Havells/ Crompton/Jaquar / Trilux/ Panasonic/ Lighting Technologies make only. The job includes the cost of testing, commissioning and making connection with 3x 1.5 sq.mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the same to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.12)

S/E of 2’x2’ LED fitting recess type with intergral/ non integral driver to be installed on existing false ceiling with the help of steel chain, rawl plug & screws etc. The fitting should be Philips/ Wipro/ Bajaj/ Havells/ Crompton/ Trilux/ Panasonic/ Lighting Technologies/ Jaquar make only. The job includes the cost of testing, commissioning and making connection with 3 x 1.5 sq.mm copper wire from adjacent light point, other petty material and labour etc. as required to complete the job to the entire satisfaction of Engineer-in-charge.(Please refer DNIT for complete specification of item no.13)

Dismantling and reinstallation of existing LED fittings. The job includes cost of disconnection and connection of the same with 3x1.5 sq.mm copper wire & all petty material, labour required to complete the job in the entire satisfaction of Engineer-in-charge.