Chandigarh Administration Tender

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DSR 14.5.1

Providing and fixing of plyboard consisting of 18 mm thick commercial ply(ISI marked) phenol bonded fixed with hard wood battens and gutties including the cost of necessary lipping screws, nails, fevicol complete in all respect and to the entire satisfaction of the Engineer in charge. N.S

Providing and applying polish with spirit polish on venner /wood work including removal of dust, preparation of surface for polish, filling with filler on the existing polished surface complete in all respects and to the entire satisfaction of the Engineer in charge.

Providing and fixing 4mm thick teak ply (ISI marked) with exisitng wooden members including the cost of nails, fevicols etc. complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 1mm thick mica (Formica, Kit, Archid or tis equivalent) of approved shade and quality on commercial surface fixed in position by means of fevicol and nails etc. (As per sample approved by Hon'ble Building Committee, Punjab and Haryana High Court, Chandigarh) complete in all respect to the entire satisfaction of Engineer in Charge. NS

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40 mm DSR 9.90.1

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. DSR 9.103

Providing and fixing 6mm thick commercial ply (ISI marked) on the exisitng wooden members including the cost of nails, fevicols etc. including painting two coats of synthetic enamel paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing Flase ceiling sheets of size 595m x595mm x15mm edge (or as per manufacture specification) to be installed at the existing flase ceiling frame provided in the Hon'ble Punjab and Haryana High Court. The material and texture of the new ceiling sheets shall match with existing flase ceiling sheets, so that the complete ceiling gives a uniform look, as the new ceiling sheets are to be placed in parts as per the site requirement to replace the damaged or missing sheets. The ceiling sheets shall as make AEROLITE or equivalent. The ceiling sheets shall have resistane to humidity, water, non-cementious ligh weight calcium silicate, (non-combustible), termite resistant, light reflectance85%, wight more than 5kg/sqm, The ceiling shall be placed in parition in the existing frame, complete in all respect to the entire satisfaction of Engineer in charge.

Renewal of old putty of glass panes (length) DSR 14.9

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) DSR 14.5.2

Providing and fixing heavy duty telescopic channel for drawers 16" to be fixed with necessary screws complete in all respects and to the entire satisfaction of the Engineer in charge. NS