Police Housing Corporation Limited Tender
With BidAssist, you can search for multiple business options for RWD Bihar tenders, RCD Bihar tenders, and any other e tender Bihar government is inviting bids for. Such Bihar tenders are posted on the eprocurement Bihar website, and on this page, you will get consolidated lists of Bihar tenders that can be sorted based on authority, department, city, and more.
Costs
EMD
₹ 3,55,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_JPHCL_61934_1Bid Award Id
ViewTender No
JPHCL/GR 18/NIT 11/2022-23Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://http://jphcl.jhpolice.gov.in/en/home/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
5.1.2
Extra for earthwork in hard soil as per specification and direction of E/I.
71.62
-
15.51
... More
5.1.8
Filling in foundation trenches and plinth layers not exceeding 150 mm thick well watered rammed fully compacted and fine dressed with earth obtained after cutting with in a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I.
157.17
-
128.88
... More
5.1.10
Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)
41.64
-
589.51
... More
5.6.3
Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
308.09
-
330.34
... More
5.3.9 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
-
-
-
... More
5.3.9.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
13.29
-
5218
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.1
Centering and shuttering including strutting, propping etc. and removal of form for
143.11
-
194.5
... More
5.3.10
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
11.79
-
6082.45
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.6
Columns, Pillars, Piers, Abutments, Posts and Struts
713.49
-
465.38
... More
5.3.9
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
5.3.9.2
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
35.14
-
4854.5
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.1
Centering and shuttering including strutting, propping etc. and removal of form for
51.1
-
194.5
... More
5.2.6 Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
23.47
-
5110.26
... More
5.2.14 Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
89.97
-
5244.08
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
3.82
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
90.81
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1.32
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
36.07
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
-
-
... More
Tie Beam
8.26
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Tie Beam
197.78
-
337.71
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
-
-
... More
Roof Beam
9.61
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Roof Beam
232.08
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
1.64
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Chajjas
46.68
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
39.69
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.3
Suspended floors, roofs, landings, balconies and access platform
299.45
-
435.82
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
3.75
-
6308.87
... More
5.3.17.7 Stairs, (excluding landings) except spiral-staircases
27.34
-
360
... More
5.7.15 Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
260.42
-
261.77
... More
5.7.6 Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
267.84
-
184.06
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
915.55
-
165.8
... More
5.5.30
Supplying, fitting anf fixing MS Grill gate with MS Grills made of 20x6mm MS flats or 16 mm MS square bars fitted on 25x25x6 mm MS Angle frame of size 60x60x6 mm including cost of fabrication , providing necesary locking arrangement with haskal and domny duly fixed in PCC (1:2:4) blocks of required size applying apriming red lead paint over steel work taxes all complete as per drawing specification and direction of E/I. (when steel is not supplied by the deptt)
563.5
-
118.98
... More
5.8.24 Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
1183.39
-
109.07
... More
5.6.7 Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.
226.05
-
326.6
... More
5.5.12
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site, hoisting as per building specification and direction of E/I.
726.25
-
82.31
... More
DSR 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge
20.12
-
354.4
... More
DSR 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Anadditional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 9.120.1 30 mm thick plain PVC door shutters
6.5
-
2131.27
... More
5.5.13
Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab beam at the time of casting all complete as per building specification and direction of E/I.
15
-
14.52
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
5.56
-
6308.87
... More
5.8.45 Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
41.96
-
66.04
... More
5.5.4 Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
5.98
-
83314.02
... More
5.5.5 providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
-
-
-
... More
(a) 10mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)
3.67
-
8206.54
... More
(b) 12mm & 16mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)
4.88
-
80879.07
... More
5.7.11
Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I.
298.04
-
54.43
... More
5.10.33
Providing 250 mm wide brick drain in cement mortar (1: 6) with av. 150 mm. clean depth and 250 mm apron including cost of earthwork involved with 75 mm, cement concrete (1: 4: 3) over one brick designation 75A, flat soling in proper grade and slope at the base, the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
69.49
-
1445.77
... More
5.5.18 Supplying, fitting and fixing fully glazed steel door, window or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100X16X3mm M.S. lugs fixed in cement concrete (1:2:4) block 15X10X10cm, size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/I.
16.72
-
4476.55
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Brick (1K+7P=8 KM.)
46.54
-
584.2
... More
Coarse Sand (1K+4P=5KM.)
166.37
-
216.2
... More
Stone Chips (1K+7P=8 KM.)
136.37
-
255.08
... More
Water Supply and Sanitary
-
-
-
... More
DSR 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
-
-
-
... More
Concealed work including cutting chases and making good the wall etc..
-
-
-
... More
DSR 18.8.1.
15mm dia
40
-
382.96
... More
DSR 18.8.2.
20mm dia
35
-
445.99
... More
DSR 18.9
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
External work
-
-
-
... More
DSR18.9.3
25 mm nominal dia Pipes
10
-
321.76
... More
3.1.18
Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l
-
-
-
... More
(b) 250 mm thick wall.
10
-
203.92
... More
3.1.12
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
(a) 25 mm dia wt not less than 500 gms
2
-
586.47
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
8.42
... More
3.1.5.1
Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/l .
6
-
354.59
... More
3.1.11
Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of E/l.
2
-
301.71
... More
3.1.10
Providing and fixing N.P/C.P brass/P.V.C porcelain shower rose of 15mm inlet etc. all complete as per specification and direction of E/l
(b) 125 mm dia.
4
-
169.39
... More
DSR 17.10
Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required :
DSR 17.10.1 Kitchen sink with drain board
DSR 17.10.1.2
510x1040 mm bowl depth 225 mm
1
-
5796.65
... More
3.2.5
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.
4
-
2084.36
... More
3.2.1
Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'P' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/ P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50 grms, 15mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specificatin and direction of E/I. (A) 580 mm long (C) with 10 ltrs. low level P.V.C. Cistern
4
-
4384.46
... More
3.1.21
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.
-
-
-
... More
(3) C.P brass liquid shop container
4
-
431.94
... More
(b) Mirrors of 6 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror
(1)600x450 mm
4
-
1436.59
... More
( c) C.P brass towel rail 20 mm x 600 mm with bracket container
4
-
664.82
... More
DSR 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
12.41.1 75 mm diameter
10
-
184.9
... More
12.41.2 110 mm diameter
12
-
277.57
... More
D.S.R 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
DSR 12.42.1.1 Coupler 75 mm
4
-
69.27
... More
DSR 12.42.1.2
Coupler 110 mm
4
-
104.12
... More
DSR 12.42.3 Single tee with door
-
-
-
... More
DSR 12.42.3.1
75 X 75 X 75 mm
4
-
122.87
... More
DSR 12.42.3.2
110 X 110 X 110 mm
4
-
178.35
... More
DSR 12.42.5
Bend 87.5°
-
-
-
... More
DSR 12.42.5.1 75 mm Bend
4
-
79.69
... More
DSR 12.42.5.2
110 MM Bend
4
-
114.58
... More
D.S.R. 12.42.6 SHOE - 110MM
-
-
-
... More
DSR 12.42.6.1 75 MM
4
-
70.4
... More
DSR 12.42.6.2 110 MM Shoe
4
-
100.65
... More
D.S.R.12.43 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
DSR 12.43.1
75 mm
3
-
269.84
... More
DSR 12.43.2
110 mm
3
-
268.67
... More
Section III 200x150xmm dia Deep bore Well With Pump set & electrification etc works.
-
-
-
... More
WD & SD Basic rate item no. 119 M 1035 Suppling all materisls labour and tools and cost of drilling 200mm x 165mm bore well in all kinds of soil and rock in rural area for installation of pump set with hydrolic DTH rig machine, all complete including suplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transprtation of Rig machine and other vehicles up to the site.
-
-
-
... More
From 0.0M to 50.0 M belew G.L
50
-
885.12
... More
From 51.0 M to200.00 M belew G.L
150
-
924.2
... More
DW& SD Basic rate item no. 120 M 1036
supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe itc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc all complete job.
30
-
1839.2
... More
DW& SD Basic rate item no. 126 M 1042
Cleaning Flushing and devloping of drilled hole for testing the discharge of water development of bore well by continueous flow of water bu using heavy compresser upto satisfaction of E/I. To get uniterrupted flow of water free from sand and soil etc.
1
-
4101.82
... More
DW& SD Basic rate item no. 120 M 1036
Supplying and fitting M.S cap over 200mm dia casing pipe as per direction of E/I .
1
-
252.89
... More
WD & SD Basic rate item no. 139 M 1055
Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.
-
-
-
... More
Submersible Pump 150 mm dia ( with Bronze impeller) up to 8 stages
2.0 HP
1
-
29065.11
... More
WD & SD Basic rate item no. 149 M 1065
Supplying Fully Automatic Starter to operate induction motor working on 415v, 3 phase ,50 hz with no volt coil , Over load element , ON-OFF push buttons with necessary materials and connected to supply etc complete starter with original sheet steel encloser as per IS: 3914.
F.A.S.D. Starter
1
-
7987.88
... More
WD & SD Basic rate item no.146 M1062
Supplying 3 core flat flexible submersible cable with, copper conductor, PVC insulated and PVC sheathed as per IS : 7098
3 Core 4mm thick
130
-
206.91
... More
Rate Analiysed and Approved
2no heavy duty clamp 40mm dia duitable for pipe with all complet job.
2
-
1996.5
... More
WD & SD Basic rate item no. 14(K) (v)
Supplying & lowering 40mm da column G. I. pipe with all complete job.
70
-
344.85
... More
Electrical Installation Work
-
-
-
... More
1.3
Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.1
Group C
25
-
794
... More
1.5
Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
80
-
262
... More
1.23
S/F Piano type switch /socket :- Supplying and fixing following piano type switch box/cover including connections etc . As required
-
-
-
... More
1.23.1
5/6 amps, one way switch
100
-
32
... More
1.24.4 5/6 amps, 3 pin socket outlet
100
-
43
... More
1.23.10
Electronic step fan reguletor, deluxe
15
-
252
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire
180
-
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
150
-
196
... More
1.7.3
2x4.0 sq mm+1x4.0 sq mm earth wire
150
-
262
... More
1.30
S/F power plug point with piano type accessories:- Supplying and fixing suitable size G.I.box in recess whit phenolic lamineted sheet cover in front including providing and fixing 5 pin, 15/16 amps socket outlet and 15/16 amps piano type switch conection painting etc, as required.
25
-
335
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
21
-
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
21
-
59
... More
9.4
SITC of following size ceilling fan 3 blades confirming to IS :374:219 including wiring the down rods standard length ( up to 30 cm with 1.5 sqmm FRPVC insulated copper wire suitable for 230 volt 50Hz single phase supply etc complet as required of make Havells,Bajaj,Crompton,Polar
9.4.1
1200 mm (48") Ceilling fan
15
-
1748
... More
2.8
S/F S.P. MCB DB:-
Supplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.8.3
6 Way,Single door
1
-
719
... More
2.11
S/F 'B' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.11.1
6/32 amps,single pole, "B" SERIES
5
-
182
... More
2.14
S/F DP MCB isoletor:-
Supplying and fixing following rating double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commisioning etc as required.
-
-
-
... More
2.14.1
40 amps
1
-
315
... More
2.1
S/F rewireble double pole/TP&N switch disconector:-
Providing and fixing following capecity double pole/ TP&N sheet metal switch disconnector fuse unit in exiting metal board with rewireble type fuse including drilling holes in metal board making connection etc as required.
-
-
-
... More
2.1.2
32 amps double pole
1
-
1050
... More
M-856
Supplying and fixing of LED15/16 W of make bajaj/havells/crompton
38
-
229.9
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
2
-
61
... More
M-775
Providing of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton
2
-
1350.66
... More
5.1
MV cable laying upto 35 sq.mm. in ground:-
Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
50
-
207
... More
S/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1)
-
-
-
... More
M-740
16 sq.mm. 4 core
50
-
254.03
... More
3.6
Earthing with copper earth plate 600x600x3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (with charcoal or coke and salt) as required…..
1
-
10666
... More
3.9
S/L 25mmX5mm G.I. earth strip in ground :-
Supplying and laying 25mmX6mm G.I.strip in 40 mm dia GI pipe from earth electrode including connection with GI nut, bolt,spring washar excavetion and re-filling etc as required.
15
-
114
... More
PART "B"
Room 1
-
-
-
... More
Building Works
-
-
-
... More
5.1.1
Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.
6.91
-
151.82
... More
5.1.2
Extra for earthwork in hard soil as per specification and direction of E/I.
6.91
-
15.51
... More
5.1.8
Filling in foundation trenches and plinth layers not exceeding 150 mm thick well watered rammed fully compacted and fine dressed with earth obtained after cutting with in a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I.
21.3
-
128.88
... More
5.1.10
Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)
9.31
-
589.51
... More
5.6.1
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
40.02
-
356.52
... More
5.3.9 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
-
-
-
... More
5.3.9.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
4.99
-
5218
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.1
Centering and shuttering including strutting, propping etc. and removal of form for
6.69
-
194.5
... More
5.3.10
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
1.76
-
6082.43
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.6
Columns, Pillars, Piers, Abutments, Posts and Struts
27.76
-
465.38
... More
5.3.9
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
5.3.9.2
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
3.14
-
4854.5
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.1
Centering and shuttering including strutting, propping etc. and removal of form for
4.93
-
194.5
... More
5.2.6 Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
4.04
-
5110.26
... More
5.2.14 Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
19.62
-
5244.08
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
0.96
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
7.69
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
0.96
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
7.69
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
-
-
... More
Tie Beam
1.93
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Tie Beam
15.39
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
-
-
... More
Roof Beam
2.01
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Roof Beam
16.01
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
0.38
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Chajjas
14.14
-
363.97
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
4.97
-
6308.87
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.3
Suspended floors, roofs, landings, balconies and access platform
42.09
-
435.82
... More
5.7.15 Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
38.79
-
261.77
... More
5.7.6 Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
27.39
-
184.06
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
226.53
-
165.8
... More
5.5.30
Supplying, fitting anf fixing MS Grill gate with MS Grills made of 20x6mm MS flats or 16 mm MS square bars fitted on 25x25x6 mm MS Angle frame of size 60x60x6 mm including cost of fabrication , providing necesary locking arrangement with haskal and domny duly fixed in PCC (1:2:4) blocks of required size applying apriming red lead paint over steel work taxes all complete as per drawing specification and direction of E/I. (when steel is not supplied by the deptt)
280
-
118.98
... More
D.S.R. 13.80
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
253.92
-
107.51
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
253.92
-
90.16
... More
5.8.21 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.
131.1
-
249.46
... More
DSR 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
111.93
-
143.52
... More
5.4.10 Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned teak wood fully paneled shutter in doors and window with 25mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.
5.85
-
6188.27
... More
5.4.2 Supplying, fitting and fixing good quality, well dressed and well seasoned teak wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
0.16
-
119984.53
... More
DSR 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
7.8
-
1298.81
... More
5.8.41
Provinding primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurment Area shall be multiplied by the co-efficient as indicated in building specificaton.)
19.5
-
57.77
... More
5.8.45 Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I
19.5
-
66.04
... More
5.8.29 Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I
14.63
-
111.98
... More
DSR 26.6 ( C ) Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.
30.13
-
2930.27
... More
D.S.R 11.41( A ) Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently and easily.
11.41A.2.1 Size of Tile 600 x 600 mm
30.13
-
1229.79
... More
5.5.13 Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.)
4
-
149.52
... More
5.5.4 Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
1.04
-
83314.02
... More
5.5.5 providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
-
-
-
... More
(a) 10mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)
0.72
-
82096.54
... More
(b) 12mm & 16mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)
0.55
-
80879.07
... More
5.7.11
Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I.
18.81
-
54.43
... More
5.10.33 Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
24.69
-
1445.77
... More
Supplying Un- Skilled Labour
50
-
300.36
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Brick (1K+7P= 8km)
9.27
-
584.2
... More
Coarse Sand (1K+4P= 5km)
71.74
-
216.2
... More
Stone Chips (1K+7P= 8km)
101.15
-
255.08
... More
Water Supply and Sanitary
-
-
-
... More
3.2.2
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
(b)10 lit. low level P.V.C. cistern
1
-
4786.86
... More
3.2.1 (C)
Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
(c) with 10 lit. low level P.V.C. cistern
1
-
4459.04
... More
3.1.12
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
(a) 20mm dia wt not less than 400 gms
20
-
473.18
... More
(a) 25 mm dia wt not less than 500 gms
15
-
586.47
... More
(a) 32 mm dia wt not less than 700 gms
20
-
805.56
... More
(a) 40 mm dia wt not less than 1kg
10
-
1403.98
... More
3.1.6
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
A) BRASS STOP COCK
(a) 15 mm dia
5
-
282.29
... More
3.1.7
Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.
-
-
-
... More
(A) Horizontal non return valve
(1)15 mm dia wt not less tham 150 gms
5
-
293.04
... More
3.1.18
Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l
-
-
-
... More
(b) 250 mm thick wall.
5
-
203.92
... More
3.2.11
Making holes in wall for laying H.C.I, pipe and restoring the same after pipe laying as per specification and direction of E/l.
-
-
-
... More
(i) 125 mm dia
10
-
154.32
... More
3.2.9
Supplying all tools and labours and cutting chajja, cornice, for laying H.C.I, pipes and making good the same as per specification and direction of E/l.
10
-
199.67
... More
M961
Supplying, fitting and fixing bathroom fittings of approved make and as per IS Specification all coat complete as per direcction of E/I.
-
-
-
... More
(ii) Pillar cock long neck
(basic rate 756.60 + 30 % for C.P and Laying Charge)
5
-
983.58
... More
(iv) Bib cock long thread
(basic rate 683.10 + 30 % for C.P and Laying Charge)
5
-
888.03
... More
M960
Supplying, fitting and fixing CP & PVC fittings of approved make and as per IS Specification all coat complete as per direcction of E/I.
-
-
-
... More
(ii) 32 mm dia pvc waste pipe 750 mm long with Coupling
(basic rate 52.00 + 30 % for C.P and Laying Charge)
5
-
67.6
... More
(ii) 15 mm dia C.P. Nipple with coupling
(basic rate 72.70 + 30 % for C.P and Laying Charge)
5
-
94.51
... More
(iii) 100 mm dia steel jali
(basic rate 40.20 + 30 % for C.P and Laying Charge)
5
-
52.26
... More
M-958
Providing Solvent Cement
(basic rate 140.00 + 30 % for C.P and Laying Charge)
2
-
182
... More
3.1.21
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.
-
-
-
... More
(2) C.P brass shop dish container medium quality with screw and hinges etc.
2
-
197.68
... More
3.1.9
Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l .
2
-
95.76
... More
DSR 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
-
-
-
... More
Concealed work including cutting chases and making good the wall etc..
-
-
-
... More
DSR 18.8.2.
20mm dia
10
-
445.99
... More
DSR 18.8.3
25mm dia
10
-
543.47
... More
DSR 18.8.4
32mm dia
10
-
618.74
... More
DSR 18.9
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
External work
-
-
-
... More
DSR18.9.5 40 mm nominal dia Pipes
10
-
485.44
... More
DSR 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
12.41.2 110 mm diameter
10
-
277.57
... More
D.S.R 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
DSR 12.42.3 Single tee with door
-
-
-
... More
DSR 12.42.3.2
110 X 110 X 110 mm
5
-
178.35
... More
DSR 12.42.5
Bend 87.5°
-
-
-
... More
DSR 12.42.5.2
110 MM Bend
5
-
114.58
... More
3.2.5
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.
1
-
1854.46
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
8.42
... More
1.1
Point wiring in PVC conduit, with Piano type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with Piano type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.1
Group A
10
-
592
... More
1.5
Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
50
-
262
... More
1.23
S/F Piano type switch /socket :- Supplying and fixing following piano type switch box/cover including connections etc . As required
-
-
-
... More
1.23.1
5/6 amps, one way switch
25
-
32
... More
1.24.4 5/6 amps, 3 pin socket outlet
25
-
43
... More
1.23.10
Electronic step fan reguletor, deluxe
4
-
252
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire
100
-
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
80
-
196
... More
1.7.3
2x4.0 sq mm+1x4.0 sq mm earth wire
60
-
262
... More
1.30
S/F power plug point with piano type accessories:- Supplying and fixing suitable size G.I.box in recess whit phenolic lamineted sheet cover in front including providing and fixing 5 pin, 15/16 amps socket outlet and 15/16 amps piano type switch conection painting etc, as required.
5
-
335
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
10
-
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
10
-
59
... More
9.4
SITC of following size ceilling fan 3 blades confirming to IS :374:219 including wiring the down rods standard length ( up to 30 cm with 1.5 sqmm FRPVC insulated copper wire suitable for 230 volt 50Hz single phase supply etc complet as required of make Havells,Bajaj,Crompton,Polar
9.4.1
1200 mm (48") Ceilling fan
35
-
1748
... More
1.44
ITC ceiling/wall fan:-
Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required
16
-
111
... More
2.8
S/F S.P. MCB DB:-
Supplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.8.3
6 Way,Single door
1
-
719
... More
2.11
S/F 'B' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.11.1
6/32 amps,single pole, "B" SERIES
5
-
182
... More
2.14
S/F DP MCB isoletor:-
Supplying and fixing following rating double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commisioning etc as required.
-
-
-
... More
2.14.1
40 amps
1
-
315
... More
2.1
S/F rewireble double pole/TP&N switch disconector:-
Providing and fixing following capecity double pole/ TP&N sheet metal switch disconnector fuse unit in exiting metal board with rewireble type fuse including drilling holes in metal board making connection etc as required.
-
-
-
... More
2.1.2
32 amps double pole
1
-
1140
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
1
-
61
... More
M-775
Providing of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton
1
-
1350.66
... More
M-856
Supplying and fixing of LED 15/16 W of make bajaj/havells/crompton
18
-
229.9
... More
5.1
MV cable laying upto 35 sq.mm. in ground:-
Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
10
-
207
... More
S/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1)
-
-
-
... More
M-740
16 sq.mm. 4 core
10
-
254.03
... More
3.6
Earthing with copper earth plate 600x600x3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (with charcoal or coke and salt) as required…..
1
-
10666
... More
3.9
S/L 25mmX5mm G.I. earth strip in ground :-
Supplying and laying 25mmX6mm G.I.strip in 40 mm dia GI pipe from earth electrode including connection with GI nut, bolt,spring washar excavetion and re-filling etc as required.
15
-
114
... More
PART "C"
Room 2
-
-
-
... More
Building Works With Water Supply and Sanitary
-
-
-
... More
5.1.1
Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.
6.54
-
139.58
... More
5.1.2
Extra for earthwork in hard soil as per specification and direction of E/I.
6.54
-
14.26
... More
5.1.8
Filling in foundation trenches and plinth layers not exceeding 150 mm thick well watered rammed fully compacted and fine dressed with earth obtained after cutting with in a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I.
16.82
-
118.49
... More
5.1.10
Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)
7.1
-
415.58
... More
5.6.1
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
31.86
-
329.83
... More
5.3.9 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
-
-
-
... More
5.3.9.1 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
4.99
-
5094.36
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.1
Centering and shuttering including strutting, propping etc. and removal of form for
6.69
-
184.61
... More
5.3.10
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)
1.76
-
5891.97
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.6
Columns, Pillars, Piers, Abutments, Posts and Struts
27.76
-
436.56
... More
5.3.9
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
5.3.9.2
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
2.12
-
5094.36
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.1
Centering and shuttering including strutting, propping etc. and removal of form for
2.24
-
184.61
... More
5.2.6 Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
3.59
-
4975.78
... More
5.2.14 Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
17.76
-
5098.81
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
0.81
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
6.48
-
396.31
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
0.81
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
6.48
-
396.31
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
-
-
... More
Tie Beam
1.62
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Tie Beam
12.97
-
396.31
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
-
-
-
... More
Roof Beam
1.57
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Roof Beam
12.56
-
396.31
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
4.41
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers Chajjas
9.6
-
396.31
... More
5.3.11
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
3.71
-
6092.63
... More
5.3.17
Centering and shuttering including strutting, propping etc. and removal of form for
5.3.17.3
Suspended floors, roofs, landings, balconies and access platform
31.92
-
348.28
... More
5.7.15 Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
29
-
247.16
... More
5.7.6 Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
20.44
-
170.27
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
201.73
-
153.24
... More
5.5.30
Supplying, fitting anf fixing MS Grill gate with MS Grills made of 20x6mm MS flats or 16 mm MS square bars fitted on 25x25x6 mm MS Angle frame of size 60x60x6 mm including cost of fabrication , providing necesary locking arrangement with haskal and domny duly fixed in PCC (1:2:4) blocks of required size applying apriming red lead paint over steel work taxes all complete as per drawing specification and direction of E/I. (when steel is not supplied by the deptt)
224
-
104.62
... More
D.S.R. 13.80
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface
to prepare the surface even and smooth complete.
222.17
-
107.51
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
222.17
-
81.3
... More
5.8.21 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.
82.87
-
229.34
... More
DSR 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
98.44
-
143.52
... More
5.4.10 Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned teak wood fully paneled shutter in doors and window with 25mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.
2.28
-
5724
... More
5.4.2 Supplying, fitting and fixing good quality, well dressed and well seasoned teak wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
0.05
-
111193.47
... More
DSR 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
5.95
-
1298.81
... More
5.8.41
Provinding primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dirt, scales smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurment Area shall be multiplied by the co-efficient as indicated in building specificaton.)
14.88
-
53.49
... More
5.8.45 Providing two coats of synthetic enamel paint of approved shade and made over steel surface including cleaning the surface thoroughly including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I
14.88
-
61.9
... More
5.8.29 Providing two coats of painting with ready mixed paint over a coat of primer of approved shade and make over new wooden surface including preparing the surface after cleaning, removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I
5.7
-
105.25
... More
DSR 26.6 ( C ) Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge.
22.48
-
2930.27
... More
D.S.R 11.41( A ) Providing and laying Vitrified tiles in floor in different sizes (thickness to
be specified by the manufacturer) with water absorption less than 0.08%
and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required
thickness, leveling system and rubber mallet for placing the tiles gently and easily.
11.41A.2.1 Size of Tile 600 x 600 mm
22.48
-
1229.79
... More
5.5.13 Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.)
4
-
138.8
... More
5.5.4 Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
1.35
-
79086.94
... More
5.5.5 providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
-
-
-
... More
(a) 10mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)
1.23
-
77259.94
... More
(b) 12mm & 16mm (TMT coil Fe 500) (only valid for SAIL & TATA STEEL)
1.42
-
76041.94
... More
5.7.11
Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I.
16.26
-
51.66
... More
5.10.33 Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
21.33
-
1347.69
... More
Supplying Un- Skilled Labour
50
-
300.36
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Brick (1K+7P= 8km)
8.25
-
741.2
... More
Coarse Sand (1K+4P= 5km)
67.66
-
205.4
... More
Stone Chips (1K+7P= 8km)
100.17
-
247.64
... More
1.1
Point wiring in PVC conduit, with piano type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with piano type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.1
Group A
10
-
592
... More
1.5
Power plug wiring in PVC conduit (2x4 sq mm) :- Wiring for light/Power plug with 2x4 sq mm FR PVC insuleted copper conductor single core cable in recess PVC conduit along with 1 Nos. 4 sq mm FR PVC insuleted copper conductor single core cable for loop earthing as required.
50
-
262
... More
1.23
S/F Piano type switch /socket :- Supplying and fixing following piano type switch box/cover including connections etc . As required
-
-
-
... More
1.23.1
5/6 amps, one way switch
25
-
32
... More
1.24.4 5/6 amps, 3 pin socket outlet
25
-
43
... More
1.23.10
Electronic step fan reguletor, deluxe
4
-
252
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire
100
-
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
80
-
196
... More
1.7.3
2x4.0 sq mm+1x4.0 sq mm earth wire
60
-
262
... More
1.30
S/F power plug point with piano type accessories:- Supplying and fixing suitable size G.I.box in recess whit phenolic lamineted sheet cover in front including providing and fixing 5 pin, 15/16 amps socket outlet and 15/16 amps piano type switch conection painting etc, as required.
5
-
335
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
10
-
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
10
-
59
... More
9.4
SITC of following size ceilling fan 3 blades confirming to IS :374:219 including wiring the down rods standard length ( up to 30 cm with 1.5 sqmm FRPVC insulated copper wire suitable for 230 volt 50Hz single phase supply etc complet as required of make Havells,Bajaj,Crompton,Polar
9.4.1
1200 mm (48") Ceilling fan
5
-
1748
... More
2.8
S/F S.P. MCB DB:-
Supplying and fixing following way single pole nutral,sheet,MCB distribution board,240 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.8.3
6 Way,Single door
1
-
719
... More
2.11
S/F 'B' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'B' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.11.1
6/32 amps,single pole, "B" SERIES
5
-
182
... More
2.14
S/F DP MCB isoletor:-
Supplying and fixing following rating double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commisioning etc as required.
-
-
-
... More
2.14.1
40 amps
1
-
315
... More
2.1
S/F rewireble double pole/TP&N switch disconector:-
Providing and fixing following capecity double pole/ TP&N sheet metal switch disconnector fuse unit in exiting metal board with rewireble type fuse including drilling holes in metal board making connection etc as required.
-
-
-
... More
2.1.2
32 amps double pole
1
-
1050
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
1
-
61
... More
M-775
Providing of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton
1
-
1350.66
... More
M-856
Supplying and fixing of LED 15/16 W of make bajaj/havells/crompton
16
-
229.9
... More
5.1
MV cable laying upto 35 sq.mm. in ground:-
Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
10
-
207
... More
S/L PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:1554, part-1)
-
-
-
... More
M-740
16 sq.mm. 4 core
10
-
254.03
... More
3.6
Earthing with copper earth plate 600x600x3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (with charcoal or coke and salt) as required…..
1
-
10666
... More
3.9
S/L 25mmX5mm G.I. earth strip in ground :-
Supplying and laying 25mmX6mm G.I.strip in 40 mm dia GI pipe from earth electrode including connection with GI nut, bolt,spring washar excavetion and re-filling etc as required.
15
-
114
... More
PART "D"
4 nos of Watch Tower
-
-
-
... More
Building Works
-
-
-
... More
5.1.1 Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.
56.56
-
151.82
... More
5.1.2
Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)
37.72
-
15.51
... More
5.1.7
Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
37.72
-
55.28
... More
5.1.10
Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)
1.04
-
589.51
... More
5.6.3
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
6.88
-
330.34
... More
5.3.1
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size) 5.3.1.6
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
3.36
-
3751.64
... More
5.3.1.1
Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level
5.3.1.1
1:1.5:3 (1 cement : 1.5 coarse sand (zone -III ) : 3 graded stone aggregate 20mm nominal Size)
12.76
-
4961.73
... More
5.2.6
Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
8.96
-
5110.26
... More
5.2.14
Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
82.84
-
5244.08
... More
5.3.10
R.C.C. Work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and stru etc. Above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
15.52
-
6082.45
... More
5.3.17.6
Centering and Shuttering including strutting, propping etc. And removal of form for Column, Pillars, Piers, Abutments, posts and Struts
101.44
-
465.38
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
14.92
-
6308.87
... More
5.3.17.20
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
150
-
504.12
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
25.08
-
6308.87
... More
5.3.17.21
Centering and Shuttering including strutting, propping etc. And removal of form for Lintel, beams. Plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick
222.03
-
409.39
... More
5.5.4
Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. 8 mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
2.26
-
83314.02
... More
5.5.5a
10mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
3.39
-
82096.54
... More
DSR 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works kg 142.30
1414.6
-
123.53
... More
DSR 21.10 Providing and fixing double glazed hermetically sealed glazing inaluminium windows, ventilators and partition etc. with 6 mm thickclear float glass both side, having 12 mm air gap, including providingEPDM gasket, perforated aluminium spacers, desiccants, sealant(Both primary and secondary sealant) etc. as per specifications,drawings and direction of Engineer-in-charge complete.
60
-
3483.99
... More
5.6.7
Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.
54.88
-
326.6
... More
5.6.13
Extra for providing and fixing 30X4mm glass strips in joints of flooring , complete job as per specification and direction of E/I.
54.88
-
35.65
... More
5.7.3
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
212.48
-
165.8
... More
5.7.6 Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I.
119.6
-
184.06
... More
5.7.14
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
338.28
-
189.13
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
332.04
-
90.16
... More
5.8.24
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
338.28
-
109.07
... More
5.8.41
Providing primer one coat of red lead paint ofapproved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
13.88
-
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
13.88
-
66.04
... More
DSR 4.17
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
18.64
-
591.74
... More
5.7.11
Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
18.64
-
54.43
... More
DSR 2.35.3 Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1%concentration
7.08
-
222.36
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Brick (1K+7P= 8km)
37.49
-
741.2
... More
Coarse Sand (1K+4P= 5km)
71.92
-
205.4
... More
Stone Chips (1K+7P= 8km)
60
-
247.64
... More
PART "E"
Watch Tower
-
-
-
... More
Building Works
-
-
-
... More
5.10.3
Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
4.47
-
1993.04
... More
5.10.1
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
8.86
-
541.67
... More
5.10.7
Disrnantling old plaster and pointing in cement or lime and raking out joints to 15mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/|.
35.01
-
21.46
... More
5.7.3
Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I
34.01
-
165.8
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
2.49
-
6308.87
... More
5.3.17.20
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
24.9
-
504.12
... More
5.3.10
R.C.C. Work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and stru etc. Above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
0.7
-
6082.45
... More
5.3.17.6
Centering and Shuttering including strutting, propping etc. And removal of form for Column, Pillars, Piers, Abutments, posts and Struts
6.3
-
465.38
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
0.07
-
6308.87
... More
5.3.17.20
Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
1.11
-
504.12
... More
5.5.4
Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. 8 mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
0.98
-
83314.02
... More
5.5.5a
10mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
0.92
-
82096.54
... More
5.5.5b
12mm dia - 20mm dia TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
0.5
-
80879.07
... More
5.8.23
Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.
350.06
-
96.4
... More
5.2.11
Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
8.86
-
5573.67
... More
5.2.27
Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of E/I.
8.86
-
133.82
... More
P-145 Supplying Labour
150
-
300.36
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Brick (1K+7P= 8km)
6.37
-
741.2
... More
Coarse Sand (1K+4P= 5km)
5.23
-
205.4
... More
Stone Chips (1K+7P= 8km)
3.62
-
247.64
... More
PART "F"
Drain Retaining Wall & Control Room
-
-
-
... More
Building Works
-
-
-
... More
5.1.1
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I.
30.2
-
151.82
... More
5.1.2 Extra for earth work in hard soil as per specification and direction of E/I.( vide classification of soil item B)
30.2
-
15.51
... More
5.1.10
Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)
2.96
-
589.51
... More
5.6.3
Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
39.35
-
330.34
... More
5.3.2
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
5.3.2.1
1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm
nominal size).
2.39
-
5989.72
... More
5.3.19
Providing, hoisting and fixing above plinth level up to floor five level precast Reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
3.28
-
7811.45
... More
5.3.19
Providing, hoisting and fixing above plinth level up to floor five level precast Reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
7.09
-
7811.45
... More
5.2.14
Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
19.48
-
5244.08
... More
5.3.19
Providing, hoisting and fixing above plinth level up to floor five level precast Reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)
2.44
-
7811.45
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
144
-
165.8
... More
5.5.4
Providing Tor steel reinforcement of 8 mm dia rods as per approved design and drawing excluding carriage of bars to work site cutting bending and binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per builing specification and direction of E/I. 8 mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
0.59
-
83314.02
... More
5.5.5
Providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.
-
-
-
... More
5.5.5 b
12 mm dia - TMT Fe 500 (Onaly valid for SAIL, TATA Stee, JSPL, Electro Steel Ltd and Vizal Steel)
0.88
-
80879.07
... More
5.7.11
Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.
28.81
-
54.43
... More
5.10.1
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
18
-
541.67
... More
5.10.7
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
177.88
-
21.46
... More
Page 145 Sl no-1
Supplying labour ………………………. all complete as per direction of E/I.
80
-
300.36
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Bricks (1K+7P = 8 KM.)
9.17
-
741.2
... More
Stone Chips (5 KM.)
10.35
-
247.64
... More
Coarse Sand (8 KM.)
11.85
-
205.4
... More
5.3.2
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:
5.3.2.1
1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm
nominal size).
2.39
-
5810.71
... More
5.7.11
Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.
200
-
51.66
... More
5.10.1
Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
2.25
-
497.98
... More
5.10.3
Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
9
-
1832.28
... More
DSR 14.88 Providing and laying in situ seven course water proofing treatmentwith APP (Atactic Polypropylene) modified Polymeric memberaneover roof consisting of first coat of bitumen primer @ 0.40 litre persqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm,which shall consist of blown type bitumen of grade 85/25 conformingto IS : 702, 3rd and 5th layers of roofing membrane APP modifiedPolymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consistingof five layers prefabricated with centre core as 100 micron HMHDPEfilm sandwiched on both sides with polymeric mix and the polymericmix is protected on both side with 20 micron HMHDPE film. 7th, thetop most layer shall be finished with brick tiles of class designation10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixedwith 2% integral water proofing compound by weight of cement overa 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) andfinished neat (item of laying brick tiles shall be paid for separately).
225
-
636.1
... More
Page 145 Sl no-1
Supplying labour ………………………. all complete as per direction of E/I.
50
-
300.36
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Stone Chips (22 KM.)
3
-
418.12
... More
Coarse Sand (8 KM.)
2
-
236.68
... More
PART "G"
Jail Supritendent Residence
-
-
-
... More
Building Works With Water Supply and Sanitary
-
-
-
... More
5.10.7
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
545.73
-
21.46
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
618.19
-
165.8
... More
5.10.10
Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.
15
-
45.12
... More
DSR 13.26
Providing and applying plaster of paris putty of 2 mm thickness overplastered surface to prepare the surface even and smooth complete.
779.62
-
186.03
... More
5.8.18
Providing two coats of oil bound distemper of approved make & shade over a coat of cement primer over new surface including preparing the plastered surface by rubbing, smooth with pumic stone or fine sand paper, aplying putty wherever required, scaffolding , washing of flores and taxes etc. all complete as per building specification direction of E/I.
779.62
-
90.16
... More
DSR 13.47
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
13.47.1
New work (Two or more coats applied @ 1.43 ltr/10 sqmover and including priming coat of exterior primer applied@ 2.20 kg/10 sqm)
309.34
-
140.94
... More
5.8.21
Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.
431.32
-
249.46
... More
DSR 26.6 C Providing and fixing at all height false ceiling of 4mm thick phenolbonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle25x25x0.4 mm thick all around suitably fixed to wall with the help ofdash fastener and hanger frame (600x600 c/c) made GI slotted Teehaving powder coating on bottom side (30x25x0.3 mm thick for mainmember & 25x25x0.3 mm for cross member) connected to ceilingwith 2.64mm GI wire and anchor fastener at every junction and alsoincluding cost of making openings for light fittings, grills, diffusers,cut outs made with frame of perimeter channels suitably fixed allcomplete as per direction of Engineer-in-charge.
109.33
-
2930.27
... More
5.4.10
Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned teak wood fully paneled shutter in doors and window with 25mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.
35.54
-
6188.27
... More
5.8.41
Providing primer one coat of red lead paint ofapproved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
82.94
-
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
82.94
-
66.04
... More
DSR 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
16.91.2 80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern.
130.06
-
877.82
... More
DSR 23.9 Providing and fixing factory made precast RCC perforated drain covers,having concrete of strength not less than M-25, of size 1000 x 450x50mm, reinforced with 8 mm dia four nos longitudinal & 9 nos crosssectional T.M.T. hoop bars, including providing 50 mm dia perforations@ 100 to 125 mm c/c, including providing edge binding with M.S.flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
50
-
1053.22
... More
5.2.14
Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.
9.17
-
5244.08
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
19.62
-
6308.87
... More
5.10.33
Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of earthwok involved with 75mm cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at th base, he drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
60.98
-
1445.77
... More
DSR 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete
11.41.2 Size of Tile 600x600 mm
99.39
-
1229.79
... More
DSR 11.56
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/RubyRed or equivalent
46.04
-
3393.23
... More
DSR 14.90 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :
14.90.1 3 mm thick
163.36
-
463.65
... More
DSR 14.92
Extra for covering top of membrane with Geotextile, 120 gsm nonwoven, 100% polyester of thickness 1 to 1.25 mm bonded to themembrane with intermittent touch by heating the membrane by ButaneTorch as per manufactures recommendation.
163.36
-
89.85
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Brick (1K+7P= 8km)
3.72
-
741.2
... More
Coarse Sand (1K+4P=5KM.)
8.73
-
205.4
... More
Water Supply and Sanitary
-
-
-
... More
3.2.2
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
(b)10 lit. low level P.V.C. cistern
4
-
4786.86
... More
3.2.1 (C)
Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
(c) with 10 lit. low level P.V.C. cistern
4
-
4501.63
... More
3.1.12
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
(a) 20mm dia wt not less than 400 gms
20
-
473.18
... More
(a) 25 mm dia wt not less than 500 gms
15
-
586.47
... More
(a) 32 mm dia wt not less than 700 gms
20
-
711.87
... More
(a) 40 mm dia wt not less than 1kg
15
-
1238.33
... More
3.1.6
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
A) BRASS STOP COCK
(a) 15 mm dia
10
-
255.43
... More
3.1.7
Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.
-
-
-
... More
(A) Horizontal non return valve
(1)15 mm dia wt not less tham 150 gms
5
-
265.37
... More
3.1.18
Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l
-
-
-
... More
(b) 250 mm thick wall.
10
-
203.92
... More
3.2.11
Making holes in wall for laying H.C.I, pipe and restoring the same after pipe laying as per specification and direction of E/l.
-
-
-
... More
(i) 125 mm dia
20
-
154.32
... More
3.2.9
Supplying all tools and labours and cutting chajja, cornice, for laying H.C.I, pipes and making good the same as per specification and direction of E/l.
20
-
199.67
... More
M961
Supplying, fitting and fixing bathroom fittings of approved make and as per IS Specification all coat complete as per direcction of E/I.
-
-
-
... More
(ii) Pillar cock long neck
(basic rate 756.60 + 30 % for C.P and Laying Charge)
10
-
983.58
... More
(iv) Bib cock long thread
(basic rate 683.10 + 30 % for C.P and Laying Charge)
10
-
888.03
... More
M960
Supplying, fitting and fixing CP & PVC fittings of approved make and as per IS Specification all coat complete as per direcction of E/I.
-
-
-
... More
(ii) 32 mm dia pvc waste pipe 750 mm long with Coupling
(basic rate 52.00 + 30 % for C.P and Laying Charge)
10
-
67.6
... More
(ii) 100 mm dia steel jali
(basic rate 72.70 + 30 % for C.P and Laying Charge)
10
-
94.51
... More
(iii) 100 mm dia steel jali
(basic rate 40.20 + 30 % for C.P and Laying Charge)
10
-
52.26
... More
M-958
Providing Solvent Cement
(basic rate 140.00 + 30 % for C.P and Laying Charge)
10
-
182
... More
3.1.21
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.
-
-
-
... More
(2) C.P brass shop dish container medium quality with screw and hinges etc.
2
-
197.68
... More
3.1.9
Providing and fixing 15 mm dia and 45 cm. long P. V .C connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/l .
5
-
95.76
... More
DSR 18.8
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.(Approved Brand - ASTRAL/ SUPREME)
-
-
-
... More
Concealed work including cutting chases and making good the wall etc..
-
-
-
... More
DSR 18.8.2.
20mm dia
15
-
445.99
... More
DSR 18.8.3
25mm dia
15
-
543.47
... More
DSR 18.8.4
32mm dia
15
-
618.74
... More
DSR 18.9
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
External work
-
-
-
... More
DSR18.9.5 40 mm nominal dia Pipes
15
-
485.44
... More
DSR 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
12.41.2 110 mm diameter
20
-
277.57
... More
D.S.R 12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
DSR 12.42.3 Single tee with door
-
-
-
... More
DSR 12.42.3.2
110 X 110 X 110 mm
10
-
178.35
... More
DSR 12.42.5
Bend 87.5°
-
-
-
... More
DSR 12.42.5.2
110 MM Bend
10
-
114.58
... More
3.2.5
Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l.
3
-
1854.46
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
8.42
... More
1.3
Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.3
Group C
80
-
864
... More
1.31
S/F light plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch conection painting etc, as required.
10
-
322
... More
1.32
S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.
18
-
405
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire
100
-
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
50
-
196
... More
1.7.4
2x6.0 sq mm+1x6.0 sq mm earth wire
50
-
351
... More
2.9
S/F T.P.MCB DB:-
Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.9.4
4 way (4+12),Double door, Horizontal type
10
-
2120
... More
2.12
S/F 'C' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.12.1
6/32 amps,single pole, "C" SERIES
20
-
182
... More
2.12.8
6/32 amps,TPN
10
-
907
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
30
-
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
20
-
59
... More
1.41
ITC fluorescent/LED fitting directly on surface:-
Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.
10
-
106
... More
1.44
ITC ceiling/wall fan:-
Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required
16
-
111
... More
1.25
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
16
-
293
... More
9.4
SITC of following size ceilling fan 3 blades confirming to IS :374:219 including wiring the down rods standard length ( up to 30 cm with 1.5 sqmm FRPVC insulated copper wire suitable for 230 volt 50Hz single phase supply etc complet as required of make Havells,Bajaj,Crompton,Polar
9.4.1
1200 mm (48") Ceilling fan
16
-
1548
... More
2.1
S/F rewireble double pole/TP&N switch disconector:-
Providing and fixing following capecity double pole/ TP&N sheet metal switch disconnector fuse unit in exiting metal board with rewireble type fuse including drilling holes in metal board making connection etc as required.
-
-
-
... More
2.1.2
32 amps double pole
1
-
1140
... More
1.48
ITC exhaust fan up to 450 mm, sweep:-
Installation of exhaust fan up to 450 mm. sweep in the exiting opening, including making the hole to suit the size of above fan, making good the damage, connection testing commissioning etc as required.
4
-
61
... More
M-775
Providing of 12'' (300 mm)exhaust fan of make bajaj/havells/usha/crompton
4
-
1350.66
... More
M-856
Supplying and fixing of LED 15/16 W of make bajaj/havells/crompton
60
-
229.9
... More
PART "H"
Kakshpal Residence
-
-
-
... More
Building Works
-
-
-
... More
5.10.7
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
225.73
-
21.46
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
225.73
-
165.8
... More
5.10.10
Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.
8
-
45.12
... More
5.10.4 Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
35.28
-
40.75
... More
5.8.24
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
451.46
-
109.07
... More
5.4.10
Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned teak wood fully paneled shutter in doors and window with 25mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.
12.36
-
6188.27
... More
5.4.3
Supplying, fitting and fixing good quality, well dressed and well seasoned local wood work in chaukhat in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all completeas per building specification and direction of E/I.
0.39
-
32088.46
... More
5.8.41
Providing primer one coat of red lead paint ofapproved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
18.72
-
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
18.72
-
66.04
... More
5.8.28
Providing two coats of painting with ready mixed paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
50.4
-
83.37
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
5.36
-
6308.87
... More
5.10.33
Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of earthwok involved with 75mm cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at th base, he drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
9.15
-
1445.77
... More
5.10.15
Taking down C.A. Of G.C.I. Sheet in roofs with ridges including stacking the serviceable materials within 15M. Lead and disposal of unserviceable materials with all leads as per direction of E/I.
123.05
-
24.26
... More
5.9.14
Providing Asbestos sheet ceiling with 120X60mm. Sal wood beams at 122cm. Centers and 60X40mm . Sal wood runners at 122cm centers including cost of 2 coats of wood preservative paint of approved make, fixing at site and taxes all complete as per approved drawing, building specification and direction of E/I.
123.05
-
901.16
... More
DSR 12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardantPVC film on the face side and 12micron metalizedpolyester on the back side with all edges sealed withthe face side PVC film which goes around and wrapsthe edges and is bonded to the edges and the back sidemetalized polyester film so as to make the tile acompletely sealed unit.
63.94
-
1691.88
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
7.1
-
6308.87
... More
DSR 22.2
Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
22.2.1 Using rough Kota stone
70.56
-
1545.48
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Coarse Sand (1K+4P=5KM.)
11.37
-
205.4
... More
Stone Chips (1K+7 P=8KM.)
11
-
247.64
... More
1.3
Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.3
Group C
40
-
864
... More
1.31
S/F light plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch conection painting etc, as required.
20
-
322
... More
1.32
S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.
20
-
405
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire
100
-
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
80
-
196
... More
1.7.4
2x6.0 sq mm+1x6.0 sq mm earth wire
60
-
351
... More
2.9
S/F T.P.MCB DB:-
Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.9.4
4 way (4+12),Double door, Horizontal type
10
-
2120
... More
2.12
S/F 'C' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.12.1
6/32 amps,single pole, "C" SERIES
20
-
182
... More
2.12.8
6/32 amps,TPN
20
-
907
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
20
-
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
20
-
59
... More
1.41
ITC fluorescent/LED fitting directly on surface:-
Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.
20
-
106
... More
1.44
ITC ceiling/wall fan:-
Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required
20
-
111
... More
1.25
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
20
-
293
... More
9.4
SITC of following size ceilling fan 3 blades confirming to IS :374:219 including wiring the down rods standard length ( up to 30 cm with 1.5 sqmm FRPVC insulated copper wire suitable for 230 volt 50Hz single phase supply etc complet as required of make Havells,Bajaj,Crompton,Polar
9.4.1
1200 mm (48") Ceilling fan
20
-
1748
... More
2.1
S/F rewireble double pole/TP&N switch disconector:-
Providing and fixing following capecity double pole/ TP&N sheet metal switch disconnector fuse unit in exiting metal board with rewireble type fuse including drilling holes in metal board making connection etc as required.
-
-
-
... More
2.1.2
32 amps double pole
2
-
1140
... More
M-856
Supplying and fixing of LED 15/16 W of make bajaj/havells/crompton
32
-
229.9
... More
PART "I"
Femele Kakshpal & Home Guard Room
-
-
-
... More
Building Works With Water Supply and Sanitary
-
-
-
... More
5.10.7
Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.
872.91
-
21.46
... More
5.7.3 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
872.91
-
165.8
... More
5.10.10
Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.
18
-
45.12
... More
5.10.4
Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.
103.68
-
40.75
... More
5.8.24
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.
1745.82
-
109.07
... More
5.4.10
Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned teak wood fully paneled shutter in doors and window with 25mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.
31.77
-
6188.27
... More
5.8.41
Providing primer one coat of red lead paint ofapproved make over steel surface including preparing the surface after cleaning removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification direction of E/I.
9.9
-
57.77
... More
5.8.45
Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
9.9
-
66.04
... More
5.8.28
Providing two coats of painting with ready mixed paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
79.47
-
83.37
... More
5.3.11
R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size)
11.07
-
6308.87
... More
5.3.17.21
Centering and Shuttering including strutting, propping etc. And removal of form for Lintel, beams. Plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick
110.4
-
409.39
... More
5.10.33
Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of earthwok involved with 75mm cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at th base, he drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
27.45
-
1445.77
... More
5.10.19
Taking down double layer naria tiles, carefully stacking properly on ground within 15M. Lead and disposal of debries with all leads complete as per direction of E/I.
112.41
-
21.44
... More
5.9.7
Providing double layer Naria- tiles in roof including cost of all labour and materials, taxes, all coplete as per building specification and direction of E/I.
112.41
-
367.67
... More
5.9.8
Providing eave tiles with full bamboo splits and coir string steel wire as per building specification and direction of E/I.
112.41
-
341.1
... More
5.3.1
Providing and laying in position cement cocrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level
5.3.1.1
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
14.4
-
4961.73
... More
DSR 22.2 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :
103.68
-
1545.48
... More
Carriage of materials by truck or by any mechenical means loading,unloading & stacking etc. all complete job as per direction of E/I.
-
-
-
... More
Coarse Sand (1K+7P=8KM.)
123.3
-
205.4
... More
Stone Chips (1K+7P=8KM.)
229.05
-
247.64
... More
Building Works With Water Supply and Sanitary
-
-
-
... More
3.2.2
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
(b)10 lit. low level P.V.C. cistern
9
-
4786.86
... More
3.2.1 (C)
Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., "p" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.
(c) with 10 lit. low level P.V.C. cistern
9
-
4459.04
... More
3.1.12
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/l
-
-
-
... More
(a) 20mm dia wt not less than 400 gms
9
-
473.18
... More
(a) 25 mm dia wt not less than 500 gms
9
-
586.47
... More
(a) 32 mm dia wt not less than 700 gms
9
-
805.56
... More
(a) 40 mm dia wt not less than 1kg
9
-
1403.98
... More
D.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4500
-
8.42
... More
1.3
Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exhaust fan point/call bell point with 1.5. sq.mm FR PVC Insuleted copper conductor single core cable in recessed PVC conduit, with modular type switch, pheonlic lamineted sheet,suitable size G.I.box etc.
-
-
-
... More
1.3.3
Group C
18
-
864
... More
1.31
S/F light plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch conection painting etc, as required.
18
-
262
... More
1.32
S/F power plug point with modular type accessories:- Supplying and fixing suitable size G.I.box with modular plate and cover in front on recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular switch conection painting etc, as required.
18
-
322
... More
1.7
Circuit/submain wiring in PVC conduit:-Wiring for circuit/submain wiring along with earth wire with the following size PVC insuleted copper conductor single core cable in recessed PVC conduit as required
-
-
-
... More
1.7.1
2x1.5 sq mm+1x1.5 sq mm earth wire
90
-
147
... More
1.7.2
2x2.5 sq mm+1x2.5 sq mm earth wire
90
-
196
... More
1.7.4
2x6.0 sq mm+1x6.0 sq mm earth wire
90
-
351
... More
2.9
S/F T.P.MCB DB:-
Supplying and fixing following way three pole and nutral,sheet,MCB distribution board,415 volt,in recess,complete with tinned copper busbar,earth bar, din bar, detachable gland plate, interconnections, phosphatized and power painted including earthing etc. as required.(But without MCB/RCCB/ISOLATOR)
-
-
-
... More
2.9.4
4 way (4+12),Double door, Horizontal type
18
-
2120
... More
2.12
S/F 'C' series. S.P.MCB:-
Supplying and fixing 6 amps to 32 amps rating,240 volts, 'C' series miniature circuit breaker suitable for lighting and others loads of following poles in the exiting MCB DB complite with connections. Testing and commisioning etc as required.
-
-
-
... More
2.12.1
6/32 amps,single pole, "C" SERIES
18
-
182
... More
2.12.8
6/32 amps,TPN
18
-
907
... More
1.33
S/F ceiling rose:-
Supplying and fixing 2 pin 5 amp, ceiling rose on the existing junction box/wooden block including connection etc as required.
18
-
45
... More
1.34
S/F Batten holder:-
Supplying and fixing batten/angle holder including connection etc, as required.
18
-
59
... More
1.41
ITC fluorescent/LED fitting directly on surface:-
Instaliation, testing and commissioning of prewired, fluorescent fitting of all types, complete with all accessosries and tube etc. directly on ceiling /wall including connection with 1.5 sq mm.FR PVC insulated, copper conductor.
18
-
106
... More
1.44
ITC ceiling/wall fan:-
Instaliation, testing and commissioning of ceiling fan including wiring the down rod of standard length( uptwo 30 cm) with 1.5 sq mm.FR PVC insulated copper conductor, single core cable etc as required
18
-
111
... More
1.25
S/F Modular type electronic fan regulator:-Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connectionons but excluding modular plate etc, as required.
18
-
293
... More
9.4
SITC of following size ceilling fan 3 blades confirming to IS :374:219 including wiring the down rods standard length ( up to 30 cm with 1.5 sqmm FRPVC insulated copper wire suitable for 230 volt 50Hz single phase supply etc complet as required of make Havells,Bajaj,Crompton,Polar
9.4.1
1200 mm (48") Ceilling fan
18
-
1748
... More
2.1
S/F rewireble double pole/TP&N switch disconector:-
Providing and fixing following capecity double pole/ TP&N sheet metal switch disconnector fuse unit in exiting metal board with rewireble type fuse including drilling holes in metal board making connection etc as required.
-
-
-
... More
2.1.2
32 amps double pole
9
-
1140
... More
Add 18% GST
1
-
2677690.82
... More
Add 1% Lebour Cess
1
-
175537.51
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements